summaryrefslogtreecommitdiff
path: root/drivers/media/platform/rcar-vin
AgeCommit message (Collapse)AuthorFilesLines
2020-08-29media: rcar-vin: Register media device when all sub-devices boundNiklas Söderlund1-7/+7
The media device is not usable by userspace before all devices involved in capture are present in the system. Move registering of the media device to the async complete callback. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-29media: rcar-vin: Unconditionally unregister notifier on removeNiklas Söderlund1-6/+2
If the VIN device is part of a group of VIN devices (all Gen3 boards) there is no reason to only unregister the group notifier if the VIN that registers the notifier is removed. The VIN that registers the notifier is always the last VIN device to be bound, so keeping the notifier around after any VIN is unbound creates an unbalanced state where no VIN in the group is operational. Fix this by unconditionally unregistering the notifier when any VIN device is unbound. Unregistering the notifier will lead to unbound() being called and all video devices exposed by any VIN instance to be removed. The lock was only needed to protect the check which VIN registers the notifier and is no longer needed. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-18media: rcar-csi2: Negotiate data lanes numberJacopo Mondi1-7/+68
Use the newly introduced get_mbus_config() subdevice pad operation to retrieve the remote subdevice MIPI CSI-2 bus configuration and configure the number of active data lanes accordingly. In order to be able to call the remote subdevice operation cache the index of the remote pad connected to the single CSI-2 input port. Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-04media: rcar-csi2: Rename confirm_start() to phy_post_init() to match its usageNiklas Söderlund1-7/+7
Since the driver was picked-up the starting of the PHY have changed quiet a bit. An artifact of these changes is the now poorly named callback confirm_start(). It used to confirm start of the PHY but now performs post PHY start initialization, rename it to phy_post_init() to reflect this. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-04media: rcar-csi2: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 formatLad Prabhakar1-0/+1
This patch adds support for MEDIA_BUS_FMT_SRGGB8_1X8 format for CSI2 input. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-04media: rcar-vin: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 formatLad Prabhakar2-1/+18
Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format in rcar-vin by setting format type to RAW8 in VNMC register and appropriately setting the bpp and bytesperline to enable V4L2_PIX_FMT_SRGGB8. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-04media: rcar-vin: Invalidate pipeline if conversion is not possible on input ↵Lad Prabhakar2-4/+13
formats Up until now the VIN was capable to convert any of its supported input mbus formats to any of it's supported output pixel formats. With the addition of RAW formats this is no longer true. This patch invalidates the pipeline by adding a check if given vin input format can be converted to supported output pixel format. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-06media: rcar-vin: Make use of V4L2_CAP_IO_MCNiklas Söderlund1-16/+24
Set the V4L2_CAP_IO_MC capability flag and remove the driver specific vidioc_enum_input, vidioc_g_input and vidioc_s_input callbacks for the media controller enabled part of the driver. Also add support mbus_code filtering for format enumeration. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-05media: rcar-csi2: Fix comment of VCDT/VCDT2 registerKoji Matsuoka1-2/+2
According to latest H/W manual v1.50, the description of channel number in the VCDT/VCDT2 register is decremented by one. Therefore, this patch fixes it about comment. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-14media: Kconfig files: use select for V4L2 subdevs and MCMauro Carvalho Chehab1-2/+6
There are lots of drivers that only work when the media controller and/or the V4L2 subdev APIs are present. Right now, someone need to first enable those APIs before using those drivers. Well, ideally, drivers, should, instead *optionally* depend on it, in order for PC camera drivers to be able to use them, but nowadays most drivers are UVC cameras, with don't require a sensor driver. So, be it. Let's instead make them select the MEDIA_CONTROLLER and the SUBDEV API, in order to make easier for people to be able of enabling them. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-02media: Split v4l2_pipeline_pm_use into v4l2_pipeline_pm_{get, put}Ezequiel Garcia1-3/+3
Currently, v4l2_pipeline_pm_use() prototype is: int v4l2_pipeline_pm_use(struct media_entity *entity, int use) Where the 'use' argument shall only be set to '1' for enable/power-on, or to '0' for disable/power-off. The integer return is specified as only meaningful when 'use' is set to '1'. Let's enforce this semantic by splitting the function in two: v4l2_pipeline_pm_get and v4l2_pipeline_pm_put. This is done for several reasons. It makes the API easier to use (or harder to misuse). It removes the constraint on the values the 'use' argument shall take. Also, it removes the need to constraint the return value, by making v4l2_pipeline_pm_put void return. And last, it's more consistent with other kernel APIs, such as the runtime pm APIs, which makes the code more symmetric. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-24media: media/platform: rename VFL_TYPE_GRABBER to _VIDEOHans Verkuil1-1/+1
'GRABBER' is a weird name, all other types map to the /dev device names. Rename to 'VIDEO' to be consistent with the other types. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-24media: rcar-vin: Add support for V4L2_FIELD_SEQ_{TB,BT}Niklas Söderlund3-9/+83
The hardware does not support capturing the field types V4L2_FIELD_SEQ_TB and V4L2_FIELD_SEQ_BT. To capture in these formats the driver needs to adjust the offset of the capture buffer and capture twice to each vb2 buffer. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-24media: rcar-vin: Move hardware buffer tracking to own structNiklas Söderlund2-17/+19
To support SEQ_TB/BT not all buffers given to the hardware will be equal, the driver needs to keep track of different buffer types. Move the tracking of buffers given to hardware into a struct so additional tracking fields can be associated with each buffer. [hverkuil: fix small checkpatch warning] Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-24media: rcar-vin: Limit NV12 availability to supported VIN channels onlyNiklas Söderlund1-1/+5
When adding support for NV12 it was overlooked that the pixel format is only supported on some VIN channels. Fix this by adding a check to only accept NV12 on the supported channels 0, 1, 4, 5, 8, 9, 12 and 13. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-24media: rcar-vin: Handle special pixel formats in a switchNiklas Söderlund1-5/+12
Before extending the special pixel format handling turn the multiple if statements into a switch. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-01-23media: rcar-vin: Use correct pixel format when aligning formatNiklas Söderlund1-1/+1
When aligning the format the pixel format that is being processed shall be used to figure out alignment constraints, not the currently active pixel format. The alignment might be part of a try operation and shall not be effected by the active format. Fix this by looking at the correct pixel format. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-11-05media: rcar-csi2: Enable support for R8A774B1Biju Das1-0/+4
Add the MIPI CSI-2 driver support for RZ/G2N(R8A774B1) SoC. The CSI-2 module of RZ/G2N is similar to R-Car M3-N. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2019-11-05media: rcar-vin: Enable support for R8A774B1Biju Das1-0/+4
Add the SoC specific information for RZ/G2N(R8A774B1) SoC. The VIN module of RZ/G2N is similar to R-Car M3-N. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2019-11-05media: rcar-vin: Add support for outputting NV12Niklas Söderlund2-7/+37
Most Gen3 boards can output frames in NV12 format, add support for this with a runtime check that the running hardware supports it. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2019-11-05media: rcar-vin: Define which hardware supports NV12Niklas Söderlund2-0/+8
Most but not all Gen3 hardware support outputting NV12, add a flag to indicate which SoCs do support it. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2019-11-05media: rcar-vin: Do not enumerate unsupported pixel formatsNiklas Söderlund1-5/+15
If a pixel format is not supported by the hardware NULL is returned by rvin_format_from_pixel() for that fourcc. Verify that the pixel format is supported using this or skip it when enumerating. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2019-10-10media: platform: Use devm_platform_ioremap_resource() in two functionsMarkus Elfring1-6/+1
Simplify these function implementations by using a known wrapper function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10media: rcar-vin: Use bytes per line instead of width for UV offsetNiklas Söderlund1-2/+2
The image size is doubled for NV16 and is calculated as bytesperline * height * 2 to accommodate the split of UV data. When writing the offset to hardware, the width is used instead of bytesperline, fix this. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10media: rcar-vin: Create compose rectangle where it is usedNiklas Söderlund1-14/+11
The rectangle used to correct the compose settings when changing the format was created inside a helper function and not where it was used. This is confusing and makes the code harder to read, fix this. This cleanup is made possible due to refactoring elsewhere and there is no functional change. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10media: rcar-vin: Rename wrongly named rectangleNiklas Söderlund1-10/+11
After recent refactoring the rectangle named crop no longer reflects it usage, to contain the source rectangle. Fix this by renaming it. There is no functional change. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: rcar-vin: Add support for V4L2_FIELD_ALTERNATENiklas Söderlund2-35/+39
The hardware is capable to passing V4L2_FIELD_ALTERNATE to user-space. Allow users to request this field format but still default to using the hardware interlacer if alternating is not explicitly requested. Before this change a sensor providing data using alternate would be always combined to an interlaced frame. After this change the user can request to receive frames as alternate if the sensor provides it. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: rcar-vin: Do not reset the crop and compose rectangles in s_fmtNiklas Söderlund1-2/+2
The crop and compose rectangles are reset when s_fmt is called resulting in potentially valid rectangles being lost when updating the format. Fix this by mapping the rectangles inside the new format. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: rcar-vin: Rename rectangle holding the video source informationNiklas Söderlund2-18/+19
The variable to hold the video source information dimensions was poorly named 'source'. This is confusing as a lot of other members of structs share the same name with different purposes, rename it src_rect in preparation of refactoring code. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: rcar-vin: Make use of V4L2_FIELD_IS_INTERLACED() macroNiklas Söderlund1-8/+3
The V4L2_FIELD_IS_INTERLACED() can be used to make the code more readable, use it. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: rcar-vin: Fix incorrect return statement in rvin_try_format()Niklas Söderlund1-1/+2
While refactoring code the return statement became corrupted, fix it by returning the correct return code. Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Fixes: 897e371389e77514 ("media: rcar-vin: simplify how formats are set and reset" Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-13media: rcar-vin: Report correct image strideNiklas Söderlund2-5/+10
The image stride was adjusted when it was written to hardware and not when configuring the format. Calculate the correct stride value and report it to userspace. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: rcar-vin: Always setup controls when opening video deviceNiklas Söderlund1-16/+16
Now that both Gen2 (video device centric) and Gen3 (media device centric) modes of the driver have controls it is required to always setup the controls when opening the devices. Remove the check which only calls v4l2_ctrl_handler_setup() for Gen2 and call it unconditionally. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: rcar-vin: Add support for RGB formats with alpha componentNiklas Söderlund2-0/+43
The R-Car VIN module supports V4L2_PIX_FMT_ARGB555 and V4L2_PIX_FMT_ABGR32 pixel formats. Add the hardware register setup and allow the alpha component to be changed while streaming using the V4L2_CID_ALPHA_COMPONENT control. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: fix checkpatch warning for macro VNDMR_A8BIT] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: rcar-vin: Add control for alpha componentNiklas Söderlund3-2/+61
In preparation to adding support for RGB pixel formats with an alpha component add a control to allow the user to control which alpha value should be used. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: rcar-vin: Rename VNDMR_DTMD_ARGB1555 to VNDMR_DTMD_ARGBNiklas Söderlund1-2/+2
The value have nothing to do with ARGB1555, it controls if the alpha component should be filled in for ARGB1555 or ARGB888. Rename it to reflect this. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: rcar-vin: Centralize black listing of pixel formatsNiklas Söderlund3-13/+16
Instead of scattering black listing of pixel formats who are not supported on particular platforms move it to a central location. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: rcar-vin: Clean up correct notifier in error pathNiklas Söderlund1-1/+1
The parallel input initialization error path cleans up the wrong async notifier, fix this by cleaning up the correct notifier. Fixes: 9863bc8695bc36e3 ("media: rcar-vin: Cleanup notifier in error path") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-21media: rcar-vin: Merge Gen2 and Gen3 file operationsNiklas Söderlund1-83/+19
After the rework of the Gen2 file operations it's now trivial to merge the Gen2 and Gen3 versions. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-21media: rcar-vin: Fold rvin_initialize_device() into rvin_open()Niklas Söderlund1-16/+8
The function no longer serve a purpose as most tasks it performed have been refactored, fold what remains of it into the only caller. While at it add error checking for v4l2_ctrl_handler_setup(). Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-21media: rcar-vin: Merge helpers dealing with powering the parallel subdeviceNiklas Söderlund1-15/+5
The two power helpers are now only dealing with the parallel subdevice, merge them into a single rvin_power_parallel() helper to reduce code duplication. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-21media: rcar-vin: Move pm_runtime_{get,put} out of helpersNiklas Söderlund1-14/+21
The helpers rvin_power_{on,off} deal with both VIN and the parallel subdevice power. This makes it hard to merge the Gen2 and Gen3 open/release functions. Move the VIN power handling directly to the open/release functions to prepare for the merge. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-21media: rcar-vin: Do not sync subdevice format when opening the video deviceNiklas Söderlund1-25/+0
The format is already synced when the subdevice is bound, there is no need to do do it every time the video device is opened. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-21media: rcar-vin: Allow interrupting lock when trying to open the video deviceNiklas Söderlund1-1/+3
The user should be allowed to break waiting for the lock when opening the video device. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-21media: rcar-vin: Remove unneeded calls to pm_runtime_{enable, disable}Niklas Söderlund1-6/+1
Runtime PM is already enabled unconditionally when the driver is probed and disabled when it's removed. There is no point in doing it again for Gen2 when opening and closing the video device. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-21media: rcar-vin: Do not call pm_runtime_{resume,suspend}()Niklas Söderlund1-5/+0
The driver does not implement runtime resume and suspend function so there is little point in trying to call them. This is a leftover from the drivers soc_camera beginnings. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-28media: rcar-csi2: Fix coccinelle warning for PTR_ERR_OR_ZERO()Niklas Söderlund1-3/+1
Use the PTR_ERR_OR_ZERO() macro instead of construct: if (IS_ERR(foo)) return PTR_ERR(foo); return 0; Fixes: 3ae854cafd76 ("rcar-csi2: Use standby mode instead of resetting") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-08media: rcar-csi2: Propagate the FLD signal for NTSC and PALNiklas Söderlund1-3/+13
Depending on which video standard is used the driver needs to setup the hardware to correctly handle fields. If stream is identified as NTSC or PAL setup field detection and propagate the field detection signal. Later versions of the datasheet have been updated to make it clear that FLD register should be set to 0 when dealing with non-interlaced field formats. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-08media: rcar-csi2: restart CSI-2 link if error is detectedNiklas Söderlund1-1/+51
Restart the CSI-2 link if the CSI-2 receiver detects an error during reception. The driver did nothing when a link error happened and the data flow simply stopped without the user knowing why. Change the driver to try and recover from errors by restarting the link and informing the user that something is not right. For obvious reasons it's not possible to recover from all errors (video source disconnected for example) but in such cases the user is at least informed of the error and the same behavior of the stopped data flow is retained. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: rcar-csi2: Move setting of Field Detection Control RegisterNiklas Söderlund1-2/+2
Later datasheet versions (rev 1.00) clarifies that the FLD register should be set after LINKCNT. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-01 03:42:34 +0300