summaryrefslogtreecommitdiff
path: root/drivers/media/platform/cadence
AgeCommit message (Collapse)AuthorFilesLines
2021-06-17media: v4l2-subdev: add subdev-wide state structTomi Valkeinen1-7/+7
We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: v4l: cadence: Handle errors of clk_prepare_enable()Evgeny Novikov1-1/+7
Handle errors of clk_prepare_enable() in csi2rx_get_resources(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: v4l: cadence: Handle errors of clk_prepare_enable()Evgeny Novikov1-1/+7
Handle errors of clk_prepare_enable() in csi2tx_get_resources(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: v4l2-async: Improve v4l2_async_notifier_add_*_subdev() APILaurent Pinchart1-1/+2
The functions that add an async subdev to an async subdev notifier take as an argument the size of the container structure they need to allocate. This is error prone, as passing an invalid size will not be caught by the compiler. Wrap those functions in macros that take a container type instead of a size, and cast the returned pointer to the desired type. The compiler will catch mistakes if the incorrect type is passed to the macro, as the assignment types won't match. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> (core+ti-cal) Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: cadence: Use v4l2_async_notifier_add_fwnode_remote_subdevEzequiel Garcia1-10/+6
The use of v4l2_async_notifier_add_subdev will be discouraged. Drivers are instead encouraged to use a helper such as v4l2_async_notifier_add_fwnode_remote_subdev. This fixes a misuse of the API, as v4l2_async_notifier_add_subdev should get a kmalloc'ed struct v4l2_async_subdev, removing some boilerplate code while at it. Use the appropriate helper v4l2_async_notifier_add_fwnode_remote_subdev, which handles the needed setup, instead of open-coding it. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-14media: Kconfig files: use select for V4L2 subdevs and MCMauro Carvalho Chehab1-4/+4
There are lots of drivers that only work when the media controller and/or the V4L2 subdev APIs are present. Right now, someone need to first enable those APIs before using those drivers. Well, ideally, drivers, should, instead *optionally* depend on it, in order for PC camera drivers to be able to use them, but nowadays most drivers are UVC cameras, with don't require a sensor driver. So, be it. Let's instead make them select the MEDIA_CONTROLLER and the SUBDEV API, in order to make easier for people to be able of enabling them. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-10-10media: v4l: cadence: Fix how unsued lanes are handled in 'csi2rx_start()'Christophe JAILLET1-1/+1
The 2nd parameter of 'find_first_zero_bit()' is a number of bits, not of bytes. So use 'csi2rx->max_lanes' instead of 'sizeof(lanes_used)'. Fixes: 1fc3b37f34f6 ("media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: Add support for Cadence CSI2TX 2.1Jan Kotas1-29/+111
This patch adds support for CSI2TX v2.1 version of the controller. Signed-off-by: Jan Kotas <jank@cadence.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: Fix Lane mapping in Cadence CSI2TXJan Kotas1-2/+2
This patch fixes mapping of lanes in DPHY_CFG register of the controller. In the register, bit 0 means first data lane. In Linux we currently assume lane 0 is clock. Signed-off-by: Jan Kotas <jank@cadence.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: Add lane checks for Cadence CSI2TXJan Kotas1-2/+11
This patch adds lane checks for CSI2TX, to prevent clock lane being used as a data lane. Signed-off-by: Jan Kotas <jank@cadence.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-04media: v4l: fwnode: Initialise the V4L2 fwnode endpoints to zeroSakari Ailus2-2/+2
Initialise the V4L2 fwnode endpoints to zero in all drivers using v4l2_fwnode_endpoint_parse(). This prepares for setting default endpoint flags as well as the bus type. Setting bus type to zero will continue to guess the bus among the guessable set (parallel, Bt.656 and CSI-2 D-PHY). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: v4l: mediabus: Recognise CSI-2 D-PHY and C-PHYSakari Ailus2-2/+2
The CSI-2 bus may use either D-PHY or C-PHY. Make this visible in media bus enum. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: platform: Switch to v4l2_async_notifier_add_subdevSteve Longerbeam1-11/+17
Switch all media platform drivers to call v4l2_async_notifier_add_subdev() to add asd's to a notifier, in place of referencing the notifier->subdevs[] array. These drivers also must now call v4l2_async_notifier_init() before adding asd's to their notifiers. There may still be cases where a platform driver maintains a list of asd's that is a duplicate of the notifier asd_list, in which case its possible the platform driver list can be removed, and can reference the notifier asd_list instead. One example of where a duplicate list has been removed in this patch is xilinx-vipp.c. If there are such cases remaining, those drivers should be optimized to remove the duplicate platform driver asd lists. None of the changes to the platform drivers in this patch have been tested. Verify that the async subdevices needed by the platform are bound at load time, and that the driver unloads and reloads correctly with no memory leaking of asd objects. Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-27media: v4l: cadence: add VIDEO_V4L2 dependencyArnd Bergmann1-0/+2
The cadence media drivers can be built-in while the v4l2 core is a loadable module. This is a mistake and leads to link errors: drivers/media/v4l2-core/v4l2-fwnode.o: In function `v4l2_async_register_subdev_sensor_common': v4l2-fwnode.c:(.text+0x12f0): undefined reference to `v4l2_async_subdev_notifier_register' v4l2-fwnode.c:(.text+0x1304): undefined reference to `v4l2_async_register_subdev' v4l2-fwnode.c:(.text+0x1318): undefined reference to `v4l2_async_notifier_unregister' v4l2-fwnode.c:(.text+0x1338): undefined reference to `v4l2_async_notifier_cleanup' cdns-csi2rx.c:(.text+0x9f8): undefined reference to `v4l2_subdev_init' cdns-csi2rx.c:(.text+0xa78): undefined reference to `v4l2_async_register_subdev' drivers/media/platform/cadence/cdns-csi2tx.o: In function `csi2tx_remove': cdns-csi2tx.c:(.text+0x88): undefined reference to `v4l2_async_unregister_subdev' drivers/media/platform/cadence/cdns-csi2tx.o: In function `csi2tx_probe': cdns-csi2tx.c:(.text+0x884): undefined reference to `v4l2_subdev_init' cdns-csi2tx.c:(.text+0xa9c): undefined reference to `v4l2_async_register_subdev' An explicit Kconfig dependency on VIDEO_V4L2 avoids the problem. Fixes: 1fc3b37f34f6 ("media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-27media: v4l: cadence: include linux/slab.hArnd Bergmann2-0/+2
I ran into a randconfig build error with the new driver: drivers/media/platform/cadence/cdns-csi2tx.c: In function 'csi2tx_probe': drivers/media/platform/cadence/cdns-csi2tx.c:477:11: error: implicit declaration of function 'kzalloc'; did you mean 'd_alloc'? [-Werror=implicit-function-declaration] kzalloc() is declared in linux/slab.h, so let's include this to make it build in all configurations. Fixes: 84b477e6d4bc ("media: v4l: cadence: Add Cadence MIPI-CSI2 TX driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-17media: v4l: cadence: Add Cadence MIPI-CSI2 TX driverMaxime Ripard3-0/+575
The Cadence MIPI-CSI2 TX controller is an hardware block meant to be used as a bridge between pixel interfaces and a CSI-2 bus. It supports operating with an internal or external D-PHY, with up to 4 lanes, or without any D-PHY. The current code only supports the latter case. While the virtual channel input on the pixel interface can be directly mapped to CSI2, the datatype input is actually a selection signal (3-bits) mapping to a table of up to 8 preconfigured datatypes/formats (programmed at start-up) The block supports up to 8 input datatypes. Acked-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-17media: cadence: csi2rx: Fix csi2rx_start error handlingSakari Ailus1-2/+2
The clocks enabled by csi2rx_start function are intended to be disabled in an error path but there are two issues: 1) the loop condition is always true and 2) the first clock disabled is the the one enabling of which failed. Fix these two bugs by changing the loop condition as well as only disabling the clocks that were actually enabled. Reported-by: Mauro Chehab <mchehab@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-16media: v4l: cadence: Add Cadence MIPI-CSI2 RX driverMaxime Ripard3-0/+524
The Cadence CSI-2 RX Controller is an hardware block meant to be used as a bridge between a CSI-2 bus and pixel grabbers. It supports operating with internal or external D-PHY, with up to 4 lanes, or without any D-PHY. The current code only supports the latter case. It also support dynamic mapping of the CSI-2 virtual channels to the associated pixel grabbers, but that isn't allowed at the moment either. Acked-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 04:25:21 +0300