| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This driver fails to build when HAVE_CLK and COMMON_CLK are disabled:
x86_64-linux-ld: vmlinux.o: in function `mgb4_remove':
mgb4_core.c:(.text+0x1915e8c): undefined reference to `clkdev_drop'
x86_64-linux-ld: mgb4_core.c:(.text+0x1915e98): undefined reference to `clk_hw_unregister'
Add a Kconfig dependency to enforce a clean build.
Fixes: 0ab13674a9bd ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
T200 card variants use the XC7A200T FPGA instead of XC7A100T. The SPI FLASH
memory layout is different as the FPGA requires bigger FW images.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- the old V4L2 core videobuf kAPI was finally removed. All media
drivers should now be using VB2 kAPI
- new automotive driver: mgb4
- new platform video driver: npcm-video
- new sensor driver: mt9m114
- new TI driver used in conjunction with Cadence CSI2RX IP to bridge
TI-specific parts
- ir-rx51 was removed and the N900 DT binding was moved to the
pwm-ir-tx generic driver
- drop atomisp-specific ov5693, using the upstream driver instead
- the camss driver has gained RDI3 support for VFE 17x
- the atomisp driver now detects ISP2400 or ISP2401 at run time. No
need to set it up at build time anymore
- lots of driver fixes, cleanups and improvements
* tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM
media: venus: Fix firmware path for resources
media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by
media: venus: hfi_parser: Add check to keep the number of codecs within range
media: venus: hfi: add checks to handle capabilities from firmware
media: venus: hfi: fix the check to handle session buffer requirement
media: venus: hfi: add checks to perform sanity on queue pointers
media: platform: cadence: select MIPI_DPHY dependency
media: MAINTAINERS: Fix path for J721E CSI2RX bindings
media: cec: meson: always include meson sub-directory in Makefile
media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr()
media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()
media: mediatek: vcodec: using encoder device to alloc/free encoder memory
media: imx-jpeg: notify source chagne event when the first picture parsed
media: cx231xx: Use EP5_BUF_SIZE macro
media: siano: Drop unnecessary error check for debugfs_create_dir/file()
media: mediatek: vcodec: Handle invalid encoder vsi
media: aspeed: Drop unnecessary error check for debugfs_create_file()
Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED
Documentation: media: gen-errors.rst: fix confusing ENOTTY description
...
|
|
If the cx NULL pointer check is true, then it reports
an error with CX18_ERR, but that uses cx. Replace it with
pr_err.
Reported by smatch:
drivers/media/pci/cx18/cx18-mailbox.c:834 cx18_vapi() error: we previously assumed 'cx' could be null (see line 833)
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Fix smatch warnings:
drivers/media/pci/mgb4/mgb4_sysfs_out.c:118 video_source_store() warn: potential spectre issue 'mgbdev->vin' [r] (local cap)
drivers/media/pci/mgb4/mgb4_sysfs_out.c:122 video_source_store() warn: possible spectre second half. 'loopin_new'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
In ipu_bridge_get_ivsc_acpi_dev(), the "ivsc_adev" acpi_device pointer
from the outer loop is handed over to the caller, which takes proper
care of its reference count.
However, the "consumer" acpi_device pointer from the inner loop is lost,
without decrementing its reference count.
Fix this by adding the missing call to acpi_dev_put().
Fixes: c66821f381ae ("media: pci: intel: Add IVSC support for IPU bridge driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Use FIELD_GET() to extract PCIe Negotiated and Maximum Link Width fields
instead of custom masking and shifting.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Digiteq Automotive MGB4 is a modular frame grabber PCIe card for automotive
video interfaces. As for now, two modules - FPD-Link and GMSL - are
available and supported by the driver. The card has two inputs and two
outputs (FPD-Link only).
In addition to the video interfaces it also provides a trigger signal
interface and a MTD interface for FPGA firmware upload.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Some missing select statements were already added back, but I ran into
another one that is missing:
ERROR: modpost: "v4l2_fwnode_endpoint_free" [drivers/media/pci/intel/ivsc/ivsc-csi.ko] undefined!
ERROR: modpost: "v4l2_fwnode_endpoint_alloc_parse" [drivers/media/pci/intel/ivsc/ivsc-csi.ko] undefined!
ERROR: modpost: "v4l2_fwnode_endpoint_parse" [drivers/media/pci/intel/ivsc/ivsc-csi.ko] undefined!
Fixes: 29006e196a56 ("media: pci: intel: ivsc: Add CSI submodule")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[Sakari Ailus: Drop V4L2_ASYNC dependency, it is implied now.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The current Kconfig symbol dependencies allow having the following Kconfig
symbol values
CONFIG_IPU_BRIDGE=m
CONFIG_VIDEO_IPU3_CIO2=y
CONFIG_CIO2_BRIDGE=n
This does not work as the IPU bridge API is conditional to
IS_ENABLED(CONFIG_IPU_BRIDGE). Fix this by changing the dependencies so
that CONFIG_IPU_BRIDGE can be separately selected.
The CONFIG_CIO2_BRIDGE symbol becomes redundant as a result and is
removed.
Fixes: 2545a2c02ba1 ("media: ipu3-cio2: allow ipu_bridge to be a module again")
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Fixes this compiler warning:
drivers/media/pci/zoran/zoran_card.c: In function 'zoran_probe':
drivers/media/pci/zoran/zoran_card.c:1316:62: warning: '%u' directive output may be truncated writing between 1 and 5 bytes into a region of size between 0 and 31 [-Wformat-truncation=]
1316 | snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "%s[%u]",
| ^~
drivers/media/pci/zoran/zoran_card.c:1316:58: note: directive argument in the range [0, 65535]
1316 | snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "%s[%u]",
| ^~~~~~~~
drivers/media/pci/zoran/zoran_card.c:1316:9: note: 'snprintf' output between 4 and 39 bytes into a destination of size 32
1316 | snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "%s[%u]",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1317 | zr->card.name, zr->id);
| ~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Fixes this compiler warning:
drivers/media/pci/cx18/cx18-driver.c: In function 'cx18_init_struct1':
drivers/media/pci/cx18/cx18-driver.c:688:65: warning: '%s' directive output may be truncated writing up to 35 bytes into a region of size 11 [-Wformat-truncation=]
688 | snprintf(cx->in_workq_name, sizeof(cx->in_workq_name), "%s-in",
| ^~
In function 'cx18_create_in_workq',
inlined from 'cx18_init_struct1' at drivers/media/pci/cx18/cx18-driver.c:724:8:
drivers/media/pci/cx18/cx18-driver.c:688:9: note: 'snprintf' output between 4 and 39 bytes into a destination of size 11
688 | snprintf(cx->in_workq_name, sizeof(cx->in_workq_name), "%s-in",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
689 | cx->v4l2_dev.name);
| ~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
Don't populate the arrays on the stack, instead make them static const.
Also add spaces between values to clean up checkpatch style warnings.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The module loads firmware so add a MODULE_FIRMWARE macro to provide that
information via modinfo.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
There may be some a race condition between timer function
bttv_irq_timeout and bttv_remove. The timer is setup in
probe and there is no timer_delete operation in remove
function. When it hit kfree btv, the function might still be
invoked, which will cause use after free bug.
This bug is found by static analysis, it may be false positive.
Fix it by adding del_timer_sync invoking to the remove function.
cpu0 cpu1
bttv_probe
->timer_setup
->bttv_set_dma
->mod_timer;
bttv_remove
->kfree(btv);
->bttv_irq_timeout
->USE btv
Fixes: 162e6376ac58 ("media: pci: Convert timers to use timer_setup()")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
During probe ivsc ace device, acpi_dev_clear_dependencies() will be
called to clear the consumer and supplier relationship between camera
sensor device and ivsc device. But IPU bridge will setup the connection
swnodes for ivsc device and camera sensor device based on this consumer
and supplier relationship. This patch defers ivsc ace's probe to make
sure IPU bridge is initialized before this consumer and supplier
relationship between camera sensor device and IVSC device is cleared.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Remove name identifier to match the device with the
defined UUID when load driver module.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Remove name identifier to match the device with the
defined UUID when load driver module.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Improve the Kconfig help text to convey the ACE is for changing camera
sensor ownership and CSI for configuring the CSI-2 rx and tx.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Convert list_for_each() to list_for_each_entry() so that the p
list_head pointer and list_entry() call are no longer needed, which
can reduce a few lines of code. No functional changed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Do not turn on the vcr_hack based on the btv->field value.
This was a change in the bttv vb2 conversion that caused
green lines at the bottom of the picture in tvtime.
It was originally added to the vb2 conversion based on
faulty information that without this there would be glitches
in the video. However, later tests suggest that this is a
problem in the utilities used to test this since tvtime
behaves fine.
This patch reverts the bttv driver to the original pre-vb2
behavior w.r.t. vcr_hack.
Fixes: b7ec3212a73a ("media: bttv: convert to vb2")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
CONFIG_VIDEO_DEV is required by other selected symbols. Depend on it.
Link: https://lore.kernel.org/linux-media/20230828085718.3912335-1-sakari.ailus@linux.intel.com
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 29006e196a56 ("media: pci: intel: ivsc: Add CSI submodule")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Select MEDIA_CONTROLLER, VIDEO_V4L2_SUBDEV_API and V4L2_ASYNC as the IVSC
driver depends on all these.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308170227.ymiFlMbT-lkp@intel.com/
Fixes: 29006e196a56 ("media: pci: intel: ivsc: Add CSI submodule")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
In commit 9011e49d54dc ("modules: only allow symbol_get of
EXPORT_SYMBOL_GPL modules") the use of symbol_get is properly restricted
to GPL-only marked symbols. This interacts oddly with the DVB logic
which only uses dvb_attach() to load the dvb driver which then uses
symbol_get().
Fix this up by properly marking all of the dvb_attach attach symbols as
EXPORT_SYMBOL_GPL().
Fixes: 9011e49d54dc ("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules")
Cc: stable <stable@kernel.org>
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-media@vger.kernel.org
Cc: linux-modules@vger.kernel.org
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20230908092035.3815268-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9719, ds90ub913
- new Intel IVSC MEI drivers
- some Mediatek platform drivers were moved to a common location
- Intel atomisp2 driver is now working with the main ov2680 driver. Due
to that, the atomisp2 ov2680 staging one was removed
- the bttv driver was finally converted to videobuf2 framework. This
was the last one upstream using videobuf version 1 core. We'll likely
remove the old videobuf framework on 6.7
- lots of improvements at atomisp driver: it now works with normal I2C
sensors. Several compile-mode dependecies to select between ISP2400
and ISP2401 are now solved in runtime
- a new ipu-bridge logic was added to work with IVSC MEI drivers
- venus driver gained better support for new VPU versions
- the v4l core async framework has gained lots of improvements and
cleanups
- lots of other cleanups, improvements and driver fixes
* tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (358 commits)
media: ivsc: Add ACPI dependency
media: bttv: convert to vb2
media: bttv: use audio defaults for winfast2000
media: bttv: refactor bttv_set_dma()
media: bttv: move vbi_skip/vbi_count out of buffer
media: bttv: remove crop info from bttv_buffer
media: bttv: remove tvnorm field from bttv_buffer
media: bttv: remove format field from bttv_buffer
media: bttv: move do_crop flag out of bttv_fh
media: bttv: copy vbi_fmt from bttv_fh
media: bttv: copy vid fmt/width/height from fh
media: bttv: radio use v4l2_fh instead of bttv_fh
media: bttv: replace BUG with WARN_ON
media: bttv: use video_drvdata to get bttv
media: i2c: rdacm21: Fix uninitialized value
media: coda: Remove duplicated include
media: vivid: fix the racy dev->radio_tx_rds_owner
media: i2c: ccs: Check rules is non-NULL
media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate
media: i2c: ds90ub953: Fix use of uninitialized variables
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've received a fairly wide range of changes at this time, including
for ALSA and ASoC core, but all of them are rather small changes.
Here are some highlights:
ALSA / ASoC Core:
- Fixes of inconsistent locking around control API helpers
- A few new control API functions and cleanups
- Workarounds for potential UAFs by delayed kobj releases
- Unified PCM copy ops with iov_iter
- Continued efforts for ASoC API cleanups
ASoC:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes
- Create a library function for intlog10() and use it in the NAU8825
driver
- Convert drivers to use the more modern maple tree register cache
- Lots of work on the SOF framework, AMD and Intel drivers, including
a lot of cleanup and new device support
- Standardization of the presentation of jacks from drivers
- Provision of some generic sound card DT properties
- Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
platforms including AVS machines with ES8336 and RT5663, Mediatek
MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110
Others:
- New test coverage including ASoC and topology tests in KUnit; this
also involves enabling UML builds of ALSA since that's the default
KUnit test environment which pulls in the addition of some stubs to
the driver
- More enhancement of pcmtest driver
- A few fixes / enhancements of MIDI 2.0 UMP core
- Using PCI definitions in allover HD-audio code
- Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
- CS35L41 HD-audio sub-codec improvements
- Continued emu10k1 improvements"
* tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (693 commits)
ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl
ASoC: dwc: i2s: Fix unused functions
ALSA: usb-audio: Don't try to submit URBs after disconnection
ALSA: emu10k1: add separate documentation for E-MU cards
ALSA: emu10k1: more documentation updates
ALSA: emu10k1: de-duplicate audigy-mixer.rst vs. sb-live-mixer.rst
ALSA: ump: Fix -Wformat-truncation warnings
ALSA: hda: Add missing dependency on CONFIG_EFI for Cirrus/TI sub-codecs
ALSA: doc: Fix missing backquote in midi-2.0.rst
ALSA: hda/realtek: Add quirk for mute LEDs on HP ENVY x360 15-eu0xxx
ALSA: hda/tas2781: Switch back to use struct i2c_driver's .probe()
ASoC: soc-core.c: Do not error if a DAI link component is not found
ASoC: codecs: Fix error code in aw88261_i2c_probe()
ASoC: audio-graph-card.c: move audio_graph_parse_of()
ASoC: cs42l43: Use new-style PM runtime macros
ALSA: documentation: Add description for USB MIDI 2.0 gadget driver
ALSA: ump: Don't create unused substreams for static blocks
ALSA: ump: Fill group names for legacy rawmidi substreams
ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPs
ALSA: ac97: Fix possible error value of *rac97
...
|
|
Back-merge the 6.5-devel branch for the clean patch application for
6.6 and resolving merge conflicts.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Linux 6.5-rc7
This is needed for the CI stuff and the msm pull has fixes in it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The IVSC driver only works in ACPI systems so make it depend on ACPI.
Compiling it elsewhere has little if any value.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 29006e196a56 ("media: pci: intel: ivsc: Add CSI submodule")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This patch converts the solo6x10 driver code to use the new unified
PCM copy callback. It's a straightforward conversion from *_user() to
*_iter() variants. As copy_to_iter() updates the internal offest at
each write, we can drop the dst counter update in the loop, too.
Note that copy_to_iter() returns the copied bytes, hence the error
condition is adjusted accordingly.
Acked-by: Ismael Luceno <ismael@iodev.co.uk>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Bluecherry Maintainers <maintainers@bluecherrydvr.com>
Cc: Anton Sviridenko <anton@corp.bluecherry.net>
Cc: Andrey Utkin <andrey_utkin@fastmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
Link: https://lore.kernel.org/r/20230815190136.8987-18-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Convert this driver from the old videobuf framework to videobuf2.
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The winfast2000 card advertised rxsubchans that weren't compatible with
its default audmode. Just use the default audmode (V4L2_TUNER_MODE_MONO)
and default audio reception flag (V4L2_TUNER_SUB_MONO) for this card.
Fixes compliance test failures.
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Break bttv_set_dma() into several smaller, separate functions so it is
easier to read the risc and dma code. Replace numeric values with
descriptive macros. Also remove the unused field btv->cap_ctl.
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Instead of storing vbi_skip and vbi_count in each bttv buffer separately,
move them to the main bttv struct as they won't change per buffer.
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Instead of storing the cropping parameters in each bttv buffer separately,
just use the global bttv crop because it won't change per buffer.
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Instead of storing the tvnorm in each bttv buffer separately, just use the
global bttv tvnorm because the tvnorm does not change per buffer.
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Instead of storing the format (video or vbi) in each bttv buffer
separately, just use the global bttv format because the format does not
change per buffer.
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The do_crop flag indicates whether a cropping rectangle has been set.
Instead of storing this flag separately in each file handle, move do_crop
to struct bttv in preparation for vb2 conversion which stops using
separate bttv file handles.
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
In preparation for the vb2 conversion, copy the vbi format from struct
bttv_fh and add it to the main struct bttv. Use vbi format from struct
bttv wherever it will be needed after the vb2 conversion which stops using
separate bttv file handles altogether. To avoid changing more code than
necessary, just leave the vbi format in separate file handles wherever it
will be subsequently removed by vb2.
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
In preparation for the vb2 conversion, copy the video format, width and
height fields from struct bttv_fh and add them to the main struct bttv.
Use these fields from struct bttv wherever they will be needed after the
vb2 conversion which stops using separate bttv file handles altogether. To
avoid changing more code than necessary, just leave the video format,
width and height fields in separate file handles wherever the code will be
subsequently removed by vb2.
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Use a v4l2_fh when opening a radio device instead of a bttv_fh and manage
it with v4l2_fh_open() and v4l2_fh_release() and v4l2_ctrl_poll(). This
eliminates bttv_fh from the radio in preparation for vb2 conversion which
stops using separate bttv file handles altogether.
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Both BUG and BUG_ON are replaced with WARN_ON wherever they would still be
present after the vb2 conversion. WARN_ON is sufficient in these cases.
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Use video_drvdata(file) instead of fh->btv to get the bttv pointer
wherever the bttv pointer will still be needed after the vb2 conversion.
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Now that the ov2680 driver verifies the bus-cfg from the endpoint
fwnode the link-frequency must be set for things to work.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Previously on ACPI platforms, sensors that are intended to be connected
to an IPU device for use with the ipu3-cio2 driver lacking the necessary
connection information in firmware. IPU bridge driver is to connect
sensors to IPU device via software nodes.
Currently IVSC located between IPU device and sensors is available in
existing commercial platforms from multiple OEMs. But the connection
information between them in firmware is also not enough to build V4L2
connection graph. This patch parses the connection properties from the
SSDB buffer in DSDT and build the connection using software nodes.
IVSC driver is based on MEI framework (previously known as HECI), it
has two MEI clients, MEI CSI and MEI ACE. Both clients are used to
communicate messages with IVSC firmware. Linux abstracts MEI client
as a device, whose bus type is MEI. And the device is addressed by a
GUID/UUID which is part of the device name of MEI client. After figured
out MEI CSI via the UUID composed device name, this patch setup the
connection between MEI CSI and IPU, and the connection between MEI CSI
and sensor via software nodes.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
ACE is a submodule of IVSC which controls camera sensor's
ownership, belonging to host or IVSC. When IVSC owns camera
sensor, it is for algorithm computing. When host wants to
control camera sensor, ACE module needs to be informed of
ownership with defined interface.
The interface is via MEI. There is a separate MEI UUID, which
this driver uses to enumerate.
To switch ownership of camera sensor between IVSC and host,
the caller specifies the defined ownership information which
will be sent to firmware by sending MEI command.
Device link(device_link_add) is used to set the right camera
sensor ownership before accessing the sensor via I2C. With
DL_FLAG_PM_RUNTIME and DL_FLAG_RPM_ACTIVE, the supplier device
will be PM runtime resumed before the consumer(camera sensor).
So use runtime PM callbacks to transfer the ownership between
host and IVSC.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
CSI is a submodule of IVSC which can route camera sensor data
to the outbound MIPI CSI-2 interface.
The interface communicating with firmware is via MEI. There is
a separate MEI UUID, which this driver uses to enumerate.
To route camera sensor data to host, the information of link
frequency and number of data lanes is sent to firmware by
sending MEI command when starting stream.
CSI also provides a privacy mode. When privacy mode is turned
on, camera sensor can't be used. This means that both IVSC and
host Image Processing Unit(IPU) can't get image data. And when
this mode is turned on, user is notified via v4l2 control
callback.
Link: https://lore.kernel.org/linux-media/20230803115550.1601965-2-sakari.ailus@linux.intel.com
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In most cases when a VCM is used there is a single integrated module
with the sensor + VCM + lens. This means that the sensor and VCM often
share regulators and possibly also something like a powerdown pin.
In the ACPI tables this is modelled as a single ACPI device with
multiple I2cSerialBus resources.
On atomisp devices the regulators and clks are modelled as ACPI
power-resources, which are controlled by the (ACPI) power state
of the sensor. So the sensor must be in D0 power state for the VCM
to work.
To make this work add a device-link with DL_FLAG_PM_RUNTIME flag
so that the sensor will automatically be runtime-resumed whenever
the VCM is runtime-resumed.
This requires the probing of the VCM and thus the creation of the VCM
I2C-client to be delayed till after the sensor driver has bound.
Move the instantiation of the VCM I2C-client to the v4l2_async_notifier
bound op, so that it is done after the sensor driver has bound; and
add code to add the device-link.
This fixes the problem with the shared ACPI power-resources on atomisp2
and this avoids the need for VCM related workarounds on IPU3 / IPU6.
E.g. until now the dw9719 driver needed to get and control a Vsio
(V sensor IO) regulator since that needs to be enabled to enable I2C
pass-through on the PMIC on the sensor module. So the driver was
controlling this regulator even though the actual dw9719 chip has no
Vsio pin / power-plane.
This also removes the need for ipu_bridge_init() to return
-EPROBE_DEFER since the VCM is now instantiated later.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The GalaxyCore GC0310 is used together with the atomisp on various
devices, add it to ipu_supported_sensors[].
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Move ipu-bridge.h to include/media/, so that it can also be used by
the atomisp code.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
