summaryrefslogtreecommitdiff
path: root/drivers/media/i2c/ov5645.c
AgeCommit message (Collapse)AuthorFilesLines
2019-08-15media: i2c: ov5645: Fix power sequenceEzequiel Garcia1-8/+18
This is mostly a port of Jacopo's fix: commit aa4bb8b8838ffcc776a79f49a4d7476b82405349 Author: Jacopo Mondi <jacopo@jmondi.org> Date: Fri Jul 6 05:51:52 2018 -0400 media: ov5640: Re-work MIPI startup sequence In the OV5645 case, the changes are: - At set_power(1) time power up MIPI Tx/Rx and set data and clock lanes in LP11 during 'sleep' and 'idle' with MIPI clock in non-continuous mode. - At set_power(0) time power down MIPI Tx/Rx (in addition to the current power down of regulators and clock gating). - At s_stream time enable/disable the MIPI interface output. With this commit the sensor is able to enter LP-11 mode during power up, as expected by some CSI-2 controllers. Many thanks to Fabio Estevam for his help debugging this issue. Tested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-13media: i2c: Convert to new i2c device probe()Kieran Bingham1-3/+2
The I2C core framework provides a simplified probe framework from commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"). These drivers do not utilise the i2c_device_id table in the probe, so we can easily convert them to utilise the simplified i2c driver registration. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: ov5645: Use regulator_bulk() functionsFabio Estevam1-73/+21
The code can be simplified by using the regulator_bulk() functions, so switch to it. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: ov5645: Remove unneeded regulator_set_voltage()Fabio Estevam1-28/+0
There is no need to call regulator_set_voltage() for each regulator that powers the camera. The voltage value for each regulator should be retrieved from the device tree, so remove the unneeded regulator_set_voltage(). Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner1-9/+1
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-06media: ov5645: constify v4l2_ctrl_ops structureJulia Lawall1-1/+1
The v4l2_ctrl_ops structure is only passed as the second argument to functions such as v4l2_ctrl_new_std for which the corresponding parameter is const, so make the v4l2_ctrl_ops structure const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: v4l: mediabus: Recognise CSI-2 D-PHY and C-PHYSakari Ailus1-1/+1
The CSI-2 bus may use either D-PHY or C-PHY. Make this visible in media bus enum. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-24media: ov5645: Supported external clock is 24MHzTodor Tomov1-6/+7
The external clock frequency was set to 23.88MHz by mistake because of a platform which cannot get closer to 24MHz. The supported by the driver external clock is 24MHz so set it correctly and also fix the values of the pixel clock and link clock. However allow 1% tolerance to the external clock as this difference is small enough to be insignificant. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-17media: ov5645: Fix write_reg return codeTodor Tomov1-2/+4
I2C transfer functions return number of successful operations (on success). Do not return the received positive return code but instead return 0 on success. The users of write_reg function already use this logic. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-04-04media: ov5645: Use v4l2_find_nearest_sizeTodor Tomov1-19/+5
Use v4l2_find_nearest_size instead of a driver specific function to find nearest matching size. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-04media: ov5645: add missing of_node_put() in error pathAkinobu Mita1-2/+3
The device node obtained with of_graph_get_next_endpoint() should be released by calling of_node_put(). But it was not released when v4l2_fwnode_endpoint_parse() failed. This change moves the of_node_put() call before the error check and fixes the issue. Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: ov5645: Add control to export CSI2 link frequencyTodor Tomov1-4/+26
Add suport for standard integer menu V4L2_CID_LINK_FREQ control. The CSI2 link frequency value is specific for each sensor mode so the sensor mode structure is extended to add this. The control is made read-only and its value is updated when the sensor mode is changed - on set_format. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: ov5645: Add control to export pixel clock frequencyTodor Tomov1-5/+21
Add suport for standard V4L2_CID_PIXEL_RATE control. The pixel clock frequency value is specific for each sensor mode so the sensor mode structure is extended to add this. The control is read-only and its value is updated when the sensor mode is changed - on set_format. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: ov5645: Set media entity functionTodor Tomov1-0/+1
Set media entity function to MEDIA_ENT_F_CAM_SENSOR. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] v4l: Switch from V4L2 OF not V4L2 fwnode APISakari Ailus1-3/+4
Switch users of the v4l2_of_ APIs to the more generic v4l2_fwnode_ APIs. Async OF matching is replaced by fwnode matching and OF matching support is removed. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Benoit Parrot <bparrot@ti.com> # i2c/ov2569.c, am437x/am437x-vpfe.c and ti-vpe/cal.c Tested-by: Hans Verkuil <hans.verkuil@cisco.com> # Atmel sama5d3 board + ov2640 sensor Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-15[media] media: Add a driver for the ov5645 camera sensorTodor Tomov1-0/+1345
The ov5645 sensor from Omnivision supports up to 2592x1944 and CSI2 interface. The driver adds support for the following modes: - 1280x960 - 1920x1080 - 2592x1944 Output format is packed 8bit UYVY. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-18 05:31:47 +0300