summaryrefslogtreecommitdiff
path: root/drivers/media/i2c/ccs
AgeCommit message (Collapse)AuthorFilesLines
2020-12-03media: ccs: Add support for manufacturer regs from sensor and module filesSakari Ailus3-22/+97
Write manufacturer specific registers (MSRs) from file to the sensor on sensor power-on. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Allow range in between I²C retriesSakari Ailus1-2/+2
Make the delay between I²C access retries a range between 1 and 2 ms. Also make the number of retries 10 instead of 5, in order not to reduce the total amount of time. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Change my e-mail addressSakari Ailus6-8/+8
Use my @linux.intel.com e-mail address in the CCS driver. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: smiapp-pll: Rename as ccs-pllSakari Ailus4-13/+13
MIPI CCS replaces SMIA and SMIA++ as the current standard. CCS brings new features while existing functionality will be supported. Rename the smiapp-pll as ccs-pll accordingly. Also add Intel copyright to the files. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Read ireal numbers correctlySakari Ailus3-10/+32
Some limit values are available in q16.q16 format, referred to as 32-bit unsigned ireal in CCS. Read these correctly. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Move limit value real to integer conversion from read to access timeSakari Ailus1-7/+12
Instead of converting the limit values at register read time, do that at access time instead. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Make real to integer number conversion optionalSakari Ailus2-9/+28
The limit values will be raw soon, and the conversion takes place later on. Prepare for that. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Refactor register reading a littleSakari Ailus1-20/+17
Rework quirk and 8-bit only access functions with a single function that takes arguments. This is later extensible to support yet more flags. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Replace somewhat harsh internal checks based on BUG with WARN_ONSakari Ailus1-4/+5
If an internal driver error was encountered, BUG was issued. Instead, do less harsh WARN_ON_ONCE and try to manage with the consequences. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: The functions to get compose or crop rectangle never return NULLSakari Ailus1-6/+2
The NULL check is not needed as the functions do not return NULL. Remove the check (and BUG). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Stop reading arrays after the first zeroSakari Ailus1-0/+3
The register arrays have a certain size but not all the entries will be relevant. In practice reading can be stopped after encountering a zero value in the array. Do that to avoid extra reads. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Read CCS static data from firmware binariesSakari Ailus2-1/+48
Read the CCS static data for sensors and modules. The files are expected to be found in "ccs" directory. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Combine revision number major and minor into oneSakari Ailus3-14/+16
The module revision number major and minor are both 8 bits while the sensor revision number is 16 bits. Combine the module revision into one number. This also adds printing the lowest 8 bits of the module version through the sysfs attribute. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Add CCS static data parser librarySakari Ailus4-1/+1403
Add a parser library for parsing the CCS static data format. The library may be also compiled in user space as the format has uses also in the user space. Therefore it is dual licensed under the 3-clause BSD license as well. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Fix obtaining bus information from firmwareSakari Ailus1-7/+6
Let v4l2_fwnode_endpoint_alloc_parse to figure out the type of the data bus. As the old bindings did not require the "bus-type" property, we need to rely on guessing between CSI-2 D-PHY and CCP2. Setting the type to CSI-2 D-PHY will parse just that and succeed even if no data-lanes are set. Also add a comment on the matter to the driver to avoid breaking this in the future. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Make hwcfg part of the device specific structSakari Ailus3-49/+51
There's no need to allocate the hardware configuration struct separately. Put it in struct ccs_sensor. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Remove remaining support for platform dataSakari Ailus1-3/+0
No need to support platform data; remove support for conveying hardware configuration that way. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Remove the I²C ID tableSakari Ailus1-7/+0
The I²C ID table is no longer needed; remove it. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Add CCS ACPI device IDSakari Ailus1-0/+7
The CCS compliant sensors use device ID "MIPI0200". Use this id for ACPI device matching. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Add device compatible identifiers for telling SMIA and CCS apartSakari Ailus1-4/+16
Add device data specific to DT compatible ID to tell SMIA and CCS devices apart already in power-up. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Add MIPI CCS compatible stringsSakari Ailus1-0/+3
Add "mipi-ccs-1.0" and "mipi-ccs-1.1" compatible strings to the CCS driver. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-02media: ccs: Request for "reset" GPIOSakari Ailus2-2/+13
The DT bindings documented "reset-gpios" property but the driver never made use of it. Instead it used a GPIO called "xshutdown", with apprently wrong polarity. Fix this by requesting "reset" GPIO with the right polarity first, and if that fails, then request "xshutdown" GPIO with the old polarity. This way it works for new users as expected while if someone, somewhere, depended on "xshutdown" GPIO, that continues to work as well. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-02media: ccs: Give all subdevs a functionSakari Ailus1-6/+8
This removes a warning at driver probe time telling that one or two entities have no function set. The function used for both the binner and scaler is the scaler. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-02media: ccs: Remove profile conceptSakari Ailus2-19/+6
The driver doesn't do anything tangible with profiles. Remove the notion, and use the capabilities directly. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-02media: smiapp: Rename as "ccs"Sakari Ailus12-0/+6230
Rename the "smiapp" driver as "ccs". MIPI CCS is the contemporary standard for raw Bayer camera sensors. The driver retains support for the SMIA++ and SMIA compliant camera sensors. A module alias is added for old user space using "smiapp" module name. Add Intel copyright while at it. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-23 16:21:34 +0300