summaryrefslogtreecommitdiff
path: root/drivers/md/dm-rq.c
AgeCommit message (Collapse)AuthorFilesLines
2021-10-18block: remove the unused rq_end_sector macroChristoph Hellwig1-1/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210920123328.1399408-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-12dm rq: don't queue request to blk-mq during DM suspendMing Lei1-0/+8
DM uses blk-mq's quiesce/unquiesce to stop/start device mapper queue. But blk-mq's unquiesce may come from outside events, such as elevator switch, updating nr_requests or others, and request may come during suspend, so simply ask for blk-mq to requeue it. Fixes one kernel panic issue when running updating nr_requests and dm-mpath suspend/resume stress test. Cc: stable@vger.kernel.org Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-08-09dm: delay registering the gendiskChristoph Hellwig1-1/+0
device mapper is currently the only outlier that tries to call register_disk after add_disk, leading to fairly inconsistent state of these block layer data structures. Instead change device-mapper to just register the gendisk later now that the holder mechanism can cope with that. Note that this introduces a user visible change: the dm kobject is now only visible after the initial table has been loaded. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20210804094147.459763-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-11blk-mq: improve the blk_mq_init_allocated_queue interfaceChristoph Hellwig1-6/+3
Don't return the passed in request_queue but a normal error code, and drop the elevator_init argument in favor of just calling elevator_init_mq directly from dm-rq. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Link: https://lore.kernel.org/r/20210602065345.355274-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-30dm rq: fix double free of blk_mq_tag_set in dev remove after table load failsBenjamin Block1-0/+2
When loading a device-mapper table for a request-based mapped device, and the allocation/initialization of the blk_mq_tag_set for the device fails, a following device remove will cause a double free. E.g. (dmesg): device-mapper: core: Cannot initialize queue for request-based dm-mq mapped device device-mapper: ioctl: unable to set up device queue for new table. Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0305e098835de000 TEID: 0305e098835de803 Fault in home space mode while using kernel ASCE. AS:000000025efe0007 R3:0000000000000024 Oops: 0038 ilc:3 [#1] SMP Modules linked in: ... lots of modules ... Supported: Yes, External CPU: 0 PID: 7348 Comm: multipathd Kdump: loaded Tainted: G W X 5.3.18-53-default #1 SLE15-SP3 Hardware name: IBM 8561 T01 7I2 (LPAR) Krnl PSW : 0704e00180000000 000000025e368eca (kfree+0x42/0x330) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 000000000000004a 000000025efe5230 c1773200d779968d 0000000000000000 000000025e520270 000000025e8d1b40 0000000000000003 00000007aae10000 000000025e5202a2 0000000000000001 c1773200d779968d 0305e098835de640 00000007a8170000 000003ff80138650 000000025e5202a2 000003e00396faa8 Krnl Code: 000000025e368eb8: c4180041e100 lgrl %r1,25eba50b8 000000025e368ebe: ecba06b93a55 risbg %r11,%r10,6,185,58 #000000025e368ec4: e3b010000008 ag %r11,0(%r1) >000000025e368eca: e310b0080004 lg %r1,8(%r11) 000000025e368ed0: a7110001 tmll %r1,1 000000025e368ed4: a7740129 brc 7,25e369126 000000025e368ed8: e320b0080004 lg %r2,8(%r11) 000000025e368ede: b904001b lgr %r1,%r11 Call Trace: [<000000025e368eca>] kfree+0x42/0x330 [<000000025e5202a2>] blk_mq_free_tag_set+0x72/0xb8 [<000003ff801316a8>] dm_mq_cleanup_mapped_device+0x38/0x50 [dm_mod] [<000003ff80120082>] free_dev+0x52/0xd0 [dm_mod] [<000003ff801233f0>] __dm_destroy+0x150/0x1d0 [dm_mod] [<000003ff8012bb9a>] dev_remove+0x162/0x1c0 [dm_mod] [<000003ff8012a988>] ctl_ioctl+0x198/0x478 [dm_mod] [<000003ff8012ac8a>] dm_ctl_ioctl+0x22/0x38 [dm_mod] [<000000025e3b11ee>] ksys_ioctl+0xbe/0xe0 [<000000025e3b127a>] __s390x_sys_ioctl+0x2a/0x40 [<000000025e8c15ac>] system_call+0xd8/0x2c8 Last Breaking-Event-Address: [<000000025e52029c>] blk_mq_free_tag_set+0x6c/0xb8 Kernel panic - not syncing: Fatal exception: panic_on_oops When allocation/initialization of the blk_mq_tag_set fails in dm_mq_init_request_queue(), it is uninitialized/freed, but the pointer is not reset to NULL; so when dev_remove() later gets into dm_mq_cleanup_mapped_device() it sees the pointer and tries to uninitialize and free it again. Fix this by setting the pointer to NULL in dm_mq_init_request_queue() error-handling. Also set it to NULL in dm_mq_cleanup_mapped_device(). Cc: <stable@vger.kernel.org> # 4.6+ Fixes: 1c357a1e86a4 ("dm: allocate blk_mq_tag_set rather than embed in mapped_device") Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-12-04block: remove the request_queue to argument request based tracepointsChristoph Hellwig1-1/+1
The request_queue can trivially be derived from the request. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-29dm table: make 'struct dm_table' definition accessible to all of DM coreMike Snitzer1-1/+1
Move 'struct dm_table' definition from dm-table.c to dm-core.h and update DM core to access its members directly. Helps optimize max_io_len() and other methods slightly. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-08-07Merge tag 'for-5.9/dm-changes' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - DM multipath locking fixes around m->flags tests and improvements to bio-based code so that it follows patterns established by request-based code. - Request-based DM core improvement to eliminate unnecessary call to blk_mq_queue_stopped(). - Add "panic_on_corruption" error handling mode to DM verity target. - DM bufio fix to to perform buffer cleanup from a workqueue rather than wait for IO in reclaim context from shrinker. - DM crypt improvement to optionally avoid async processing via workqueues for reads and/or writes -- via "no_read_workqueue" and "no_write_workqueue" features. This more direct IO processing improves latency and throughput with faster storage. Avoiding workqueue IO submission for writes (DM_CRYPT_NO_WRITE_WORKQUEUE) is a requirement for adding zoned block device support to DM crypt. - Add zoned block device support to DM crypt. Makes use of DM_CRYPT_NO_WRITE_WORKQUEUE and a new optional feature (DM_CRYPT_WRITE_INLINE) that allows write completion to wait for encryption to complete. This allows write ordering to be preserved, which is needed for zoned block devices. - Fix DM ebs target's check for REQ_OP_FLUSH. - Fix DM core's report zones support to not report more zones than were requested. - A few small compiler warning fixes. - DM dust improvements to return output directly to the user rather than require they scrape the system log for output. * tag 'for-5.9/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: don't call report zones for more than the user requested dm ebs: Fix incorrect checking for REQ_OP_FLUSH dm init: Set file local variable static dm ioctl: Fix compilation warning dm raid: Remove empty if statement dm verity: Fix compilation warning dm crypt: Enable zoned block device support dm crypt: add flags to optionally bypass kcryptd workqueues dm bufio: do buffer cleanup from a workqueue dm rq: don't call blk_mq_queue_stopped() in dm_stop_queue() dm dust: add interface to list all badblocks dm dust: report some message results directly back to user dm verity: add "panic_on_corruption" error handling mode dm mpath: use double checked locking in fast path dm mpath: rename current_pgpath to pgpath in multipath_prepare_ioctl dm mpath: rework __map_bio() dm mpath: factor out multipath_queue_bio dm mpath: push locking down to must_push_back_rq() dm mpath: take m->lock spinlock when testing QUEUE_IF_NO_PATH dm mpath: changes from initial m->flags locking audit
2020-08-03Merge tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+2
Pull core block updates from Jens Axboe: "Good amount of cleanups and tech debt removals in here, and as a result, the diffstat shows a nice net reduction in code. - Softirq completion cleanups (Christoph) - Stop using ->queuedata (Christoph) - Cleanup bd claiming (Christoph) - Use check_events, moving away from the legacy media change (Christoph) - Use inode i_blkbits consistently (Christoph) - Remove old unused writeback congestion bits (Christoph) - Cleanup/unify submission path (Christoph) - Use bio_uninit consistently, instead of bio_disassociate_blkg (Christoph) - sbitmap cleared bits handling (John) - Request merging blktrace event addition (Jan) - sysfs add/remove race fixes (Luis) - blk-mq tag fixes/optimizations (Ming) - Duplicate words in comments (Randy) - Flush deferral cleanup (Yufen) - IO context locking/retry fixes (John) - struct_size() usage (Gustavo) - blk-iocost fixes (Chengming) - blk-cgroup IO stats fixes (Boris) - Various little fixes" * tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits) block: blk-timeout: delete duplicated word block: blk-mq-sched: delete duplicated word block: blk-mq: delete duplicated word block: genhd: delete duplicated words block: elevator: delete duplicated word and fix typos block: bio: delete duplicated words block: bfq-iosched: fix duplicated word iocost_monitor: start from the oldest usage index iocost: Fix check condition of iocg abs_vdebt block: Remove callback typedefs for blk_mq_ops block: Use non _rcu version of list functions for tag_set_list blk-cgroup: show global disk stats in root cgroup io.stat blk-cgroup: make iostat functions visible to stat printing block: improve discard bio alignment in __blkdev_issue_discard() block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers block: defer flush request no matter whether we have elevator block: make blk_timeout_init() static block: remove retry loop in ioc_release_fn() block: remove unnecessary ioc nested locking block: integrate bd_start_claiming into __blkdev_get ...
2020-07-20dm rq: don't call blk_mq_queue_stopped() in dm_stop_queue()Ming Lei1-3/+0
dm_stop_queue() only uses blk_mq_quiesce_queue() so it doesn't formally stop the blk-mq queue; therefore there is no point making the blk_mq_queue_stopped() check -- it will never be stopped. In addition, even though dm_stop_queue() actually tries to quiesce hw queues via blk_mq_quiesce_queue(), checking with blk_queue_quiesced() to avoid unnecessary queue quiesce isn't reliable because: the QUEUE_FLAG_QUIESCED flag is set before synchronize_rcu() and dm_stop_queue() may be called when synchronize_rcu() from another blk_mq_quiesce_queue() is in-progress. Fixes: 7b17c2f7292ba ("dm: Fix a race condition related to stopping and starting queues") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-07dm: do not use waitqueue for request-based DMMing Lei1-4/+0
Given request-based DM now uses blk-mq's blk_mq_queue_inflight() to determine if outstanding IO has completed (and DM has no control over the blk-mq state machine used to track outstanding IO) it is unsafe to wakeup waiter (dm_wait_for_completion) before blk-mq has cleared a request's state bits (e.g. MQ_RQ_IN_FLIGHT or MQ_RQ_COMPLETE). As such dm_wait_for_completion() could be left to wait indefinitely if no other requests complete. Fix this by eliminating request-based DM's use of waitqueue to wait for blk-mq requests to complete in dm_wait_for_completion. Signed-off-by: Ming Lei <ming.lei@redhat.com> Depends-on: 3c94d83cb3526 ("blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()") Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-06-24blk-mq: move failure injection out of blk_mq_complete_requestChristoph Hellwig1-1/+2
Move the call to blk_should_fake_timeout out of blk_mq_complete_request and into the drivers, skipping call sites that are obvious error handlers, and remove the now superflous blk_mq_force_complete_rq helper. This ensures we don't keep injecting errors into completions that just terminate the Linux request after the hardware has been reset or the command has been aborted. Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: drain I/O when all CPUs in a hctx are offlineMing Lei1-1/+1
Most of blk-mq drivers depend on managed IRQ's auto-affinity to setup up queue mapping. Thomas mentioned the following point[1]: "That was the constraint of managed interrupts from the very beginning: The driver/subsystem has to quiesce the interrupt line and the associated queue _before_ it gets shutdown in CPU unplug and not fiddle with it until it's restarted by the core when the CPU is plugged in again." However, current blk-mq implementation doesn't quiesce hw queue before the last CPU in the hctx is shutdown. Even worse, CPUHP_BLK_MQ_DEAD is a cpuhp state handled after the CPU is down, so there isn't any chance to quiesce the hctx before shutting down the CPU. Add new CPUHP_AP_BLK_MQ_ONLINE state to stop allocating from blk-mq hctxs where the last CPU goes away, and wait for completion of in-flight requests. This guarantees that there is no inflight I/O before shutting down the managed IRQ. Add a BLK_MQ_F_STACKING and set it for dm-rq and loop, so we don't need to wait for completion of in-flight requests from these drivers to avoid a potential dead-lock. It is safe to do this for stacking drivers as those do not use interrupts at all and their I/O completions are triggered by underlying devices I/O completion. [1] https://lore.kernel.org/linux-block/alpine.DEB.2.21.1904051331270.1802@nanos.tec.linutronix.de/ [hch: different retry mechanism, merged two patches, minor cleanups] Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-06block: Delay default elevator initializationDamien Le Moal1-1/+1
When elevator_init_mq() is called from blk_mq_init_allocated_queue(), the only information known about the device is the number of hardware queues as the block device scan by the device driver is not completed yet for most drivers. The device type and elevator required features are not set yet, preventing to correctly select the default elevator most suitable for the device. This currently affects all multi-queue zoned block devices which default to the "none" elevator instead of the required "mq-deadline" elevator. These drives currently include host-managed SMR disks connected to a smartpqi HBA and null_blk block devices with zoned mode enabled. Upcoming NVMe Zoned Namespace devices will also be affected. Fix this by adding the boolean elevator_init argument to blk_mq_init_allocated_queue() to control the execution of elevator_init_mq(). Two cases exist: 1) elevator_init = false is used for calls to blk_mq_init_allocated_queue() within blk_mq_init_queue(). In this case, a call to elevator_init_mq() is added to __device_add_disk(), resulting in the delayed initialization of the queue elevator after the device driver finished probing the device information. This effectively allows elevator_init_mq() access to more information about the device. 2) elevator_init = true preserves the current behavior of initializing the elevator directly from blk_mq_init_allocated_queue(). This case is used for the special request based DM devices where the device gendisk is created before the queue initialization and device information (e.g. queue limits) is already known when the queue initialization is executed. Additionally, to make sure that the elevator initialization is never done while requests are in-flight (there should be none when the device driver calls device_add_disk()), freeze and quiesce the device request queue before calling blk_mq_init_sched() in elevator_init_mq(). Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-05blk-mq: add callback of .cleanup_rqMing Lei1-0/+1
SCSI maintains its own driver private data hooked off of each SCSI request, and the pridate data won't be freed after scsi_queue_rq() returns BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE. An upper layer driver (e.g. dm-rq) may need to retry these SCSI requests, before SCSI has fully dispatched them, due to a lower level SCSI driver's resource limitation identified in scsi_queue_rq(). Currently SCSI's per-request private data is leaked when the upper layer driver (dm-rq) frees and then retries these requests in response to BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE returns from scsi_queue_rq(). This usecase is so specialized that it doesn't warrant training an existing blk-mq interface (e.g. blk_mq_free_request) to allow SCSI to account for freeing its driver private data -- doing so would add an extra branch for handling a special case that all other consumers of SCSI (and blk-mq) won't ever need to worry about. So the most pragmatic way forward is to delegate freeing SCSI driver private data to the upper layer driver (dm-rq). Do so by adding new .cleanup_rq callback and calling a new blk_mq_cleanup_rq() method from dm-rq. A following commit will implement the .cleanup_rq() hook in scsi_mq_ops. Cc: Ewan D. Milne <emilne@redhat.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: <stable@vger.kernel.org> Fixes: 396eaf21ee17 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-09dm: update stale comment in end_clone_bio()Pavel Begunkov1-1/+1
Since commit a1ce35fa49852db60fc6e268 ("block: remove dead elevator code") blk_end_request() has been replaced with blk_mq_end_request(). So update comment to reference blk_mq_end_request() accordingly. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-25dm mpath: fix missing call of path selector type->end_ioYufen Yu1-4/+4
After commit 396eaf21ee17 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback"), map_request() will requeue the tio when issued clone request return BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE. Thus, if device driver status is error, a tio may be requeued multiple times until the return value is not DM_MAPIO_REQUEUE. That means type->start_io may be called multiple times, while type->end_io is only called when IO complete. In fact, even without commit 396eaf21ee17, setup_clone() failure can also cause tio requeue and associated missed call to type->end_io. The service-time path selector selects path based on in_flight_size, which is increased by st_start_io() and decreased by st_end_io(). Missed calls to st_end_io() can lead to in_flight_size count error and will cause the selector to make the wrong choice. In addition, queue-length path selector will also be affected. To fix the problem, call type->end_io in ->release_clone_rq before tio requeue. map_info is passed to ->release_clone_rq() for map_request() error path that result in requeue. Fixes: 396eaf21ee17 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback") Cc: stable@vger.kernl.org Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-04dm: disable DISCARD if the underlying storage no longer supports itMike Snitzer1-4/+7
Storage devices which report supporting discard commands like WRITE_SAME_16 with unmap, but reject discard commands sent to the storage device. This is a clear storage firmware bug but it doesn't change the fact that should a program cause discards to be sent to a multipath device layered on this buggy storage, all paths can end up failed at the same time from the discards, causing possible I/O loss. The first discard to a path will fail with Illegal Request, Invalid field in cdb, e.g.: kernel: sd 8:0:8:19: [sdfn] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE kernel: sd 8:0:8:19: [sdfn] tag#0 Sense Key : Illegal Request [current] kernel: sd 8:0:8:19: [sdfn] tag#0 Add. Sense: Invalid field in cdb kernel: sd 8:0:8:19: [sdfn] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 a0 08 00 00 00 80 00 00 00 kernel: blk_update_request: critical target error, dev sdfn, sector 10487808 The SCSI layer converts this to the BLK_STS_TARGET error number, the sd device disables its support for discard on this path, and because of the BLK_STS_TARGET error multipath fails the discard without failing any path or retrying down a different path. But subsequent discards can cause path failures. Any discards sent to the path which already failed a discard ends up failing with EIO from blk_cloned_rq_check_limits with an "over max size limit" error since the discard limit was set to 0 by the sd driver for the path. As the error is EIO, this now fails the path and multipath tries to send the discard down the next path. This cycle continues as discards are sent until all paths fail. Fix this by training DM core to disable DISCARD if the underlying storage already did so. Also, fix branching in dm_done() and clone_endio() to reflect the mutually exclussive nature of the IO operations in question. Cc: stable@vger.kernel.org Reported-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-03-10Merge tag 'for-5.1/dm-changes' of ↵Linus Torvalds1-0/+16
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Update bio-based DM core to always call blk_queue_split() and update DM targets to properly advertise discard limits that blk_queue_split() looks at when dtermining to split discard. Whereby allowing DM core's own 'split_discard_bios' to be removed. - Improve DM cache target to provide support for discard passdown to the origin device. - Introduce support to directly boot to a DM mapped device from init by using dm-mod.create= module param. This eliminates the need for an elaborate initramfs that is otherwise needed to create DM devices. This feature's implementation has been worked on for quite some time (got up to v12) and is of particular interest to Android and other more embedded platforms (e.g. ARM). - Rate limit errors from the DM integrity target that were identified as the cause for recent NMI hangs due to console limitations. - Add sanity checks for user input to thin-pool and external snapshot creation. - Remove some unused leftover kmem caches from when old .request_fn request-based support was removed. - Various small cleanups and fixes to targets (e.g. typos, needless unlikely() annotations, use struct_size(), remove needless .direct_access method from dm-snapshot) * tag 'for-5.1/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm integrity: limit the rate of error messages dm snapshot: don't define direct_access if we don't support it dm cache: add support for discard passdown to the origin device dm writecache: fix typo in name for writeback_wq dm: add support to directly boot to a mapped device dm thin: add sanity checks to thin-pool and external snapshot creation dm block manager: remove redundant unlikely annotation dm verity fec: remove redundant unlikely annotation dm integrity: remove redundant unlikely annotation dm: always call blk_queue_split() in dm_process_bio() dm: fix to_sector() for 32bit dm switch: use struct_size() in kzalloc() dm: remove unused _rq_tio_cache and _rq_cache dm: eliminate 'split_discard_bios' flag from DM target interface dm: update dm_process_bio() to split bio if in ->make_request_fn()
2019-03-05dm: remove unused _rq_tio_cache and _rq_cacheMike Snitzer1-0/+16
Also move dm_rq_target_io structure definition from dm-rq.h to dm-rq.c Fixes: 6a23e05c2fe3c6 ("dm: remove legacy request-based IO path") Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-02-15Merge tag 'v5.0-rc6' into for-5.1/blockJens Axboe1-1/+1
Pull in 5.0-rc6 to avoid a dumb merge conflict with fs/iomap.c. This is needed since io_uring is now based on the block branch, to avoid a conflict between the multi-page bvecs and the bits of io_uring that touch the core block parts. * tag 'v5.0-rc6': (525 commits) Linux 5.0-rc6 x86/mm: Make set_pmd_at() paravirt aware MAINTAINERS: Update the ocores i2c bus driver maintainer, etc blk-mq: remove duplicated definition of blk_mq_freeze_queue Blk-iolatency: warn on negative inflight IO counter blk-iolatency: fix IO hang due to negative inflight counter MAINTAINERS: unify reference to xen-devel list x86/mm/cpa: Fix set_mce_nospec() futex: Handle early deadlock return correctly futex: Fix barrier comment net: dsa: b53: Fix for failure when irq is not defined in dt blktrace: Show requests without sector mips: cm: reprime error cause mips: loongson64: remove unreachable(), fix loongson_poweroff(). sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach() geneve: should not call rt6_lookup() when ipv6 was disabled KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221) KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222) kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974) signal: Better detection of synchronous signals ...
2019-02-15block: kill BLK_MQ_F_SG_MERGEMing Lei1-1/+1
QUEUE_FLAG_NO_SG_MERGE has been killed, so kill BLK_MQ_F_SG_MERGE too. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-07dm: add memory barrier before waitqueue_activeMikulas Patocka1-1/+1
Block core changes to switch bio-based IO accounting to be percpu had a side-effect of altering DM core to now rely on calling waitqueue_active (in both bio-based and request-based) to check if another task is in dm_wait_for_completion(). A memory barrier is needed before calling waitqueue_active(). DM core doesn't piggyback on a preceding memory barrier so it must explicitly use its own. For more details on why using waitqueue_active() without a preceding barrier is unsafe, please see the comment before the waitqueue_active() definition in include/linux/wait.h. Add the missing memory barrier by switching to using wq_has_sleeper(). Fixes: 6f75723190d8 ("dm: remove the pending IO accounting") Fixes: c4576aed8d85 ("dm: fix request-based dm's use of dm_wait_for_completion") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-12-18dm rq: cleanup leftover code from recently removed q->mq_ops branchingMike Snitzer1-3/+1
When commit 6a23e05c2fe3c6 ("dm: remove legacy request-based IO path") removed some q->mq_ops branching from map_request() it left in place a goto that was only needed if that branching (and conditional 'r' assignment) existed. Now that the branching is gone map_request()'s goto can be removed too. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-12-18dm rq: remove unused arguments from rq_completed()Mike Snitzer1-9/+5
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-12-11dm: fix request-based dm's use of dm_wait_for_completionMike Snitzer1-4/+2
The md->wait waitqueue is used by both bio-based and request-based DM. Commit dbd3bbd291 ("dm rq: leverage blk_mq_queue_busy() to check for outstanding IO") lost sight of the requirement that dm_wait_for_completion() must work with all types of DM devices. Fix md_in_flight() to call the blk-mq or bio-based method accordingly. Fixes: dbd3bbd291 ("dm rq: leverage blk_mq_queue_busy() to check for outstanding IO") Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10dm rq: leverage blk_mq_queue_busy() to check for outstanding IOMike Snitzer1-5/+4
Now that request-based dm-multipath only supports blk-mq, make use of the newly introduced blk_mq_queue_busy() to check for outstanding IO -- rather than (ab)using the block core's in_flight counters. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-16block: add queue_is_mq() helperJens Axboe1-1/+1
Various spots check for q->mq_ops being non-NULL, but provide a helper to do this instead. Where the ->mq_ops != NULL check is redundant, remove it. Since mq == rq-based now that legacy is gone, get rid of the queue_is_rq_based() and just use queue_is_mq() everywhere. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-11dm: remove legacy request-based IO pathJens Axboe1-290/+26
dm supports both, and since we're killing off the legacy path in general, get rid of it in dm. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-05-31dm: convert to bioset_init()/mempool_init()Kent Overstreet1-1/+1
Convert dm to embedded bio sets. Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-09block: consolidate struct request timestamp fieldsOmar Sandoval1-1/+1
Currently, struct request has four timestamp fields: - A start time, set at get_request time, in jiffies, used for iostats - An I/O start time, set at start_request time, in ktime nanoseconds, used for blk-stats (i.e., wbt, kyber, hybrid polling) - Another start time and another I/O start time, used for cfq and bfq These can all be consolidated into one start time and one I/O start time, both in ktime nanoseconds, shaving off up to 16 bytes from struct request depending on the kernel config. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-04Merge tag 'for-linus-20180204' of git://git.kernel.dk/linux-blockLinus Torvalds1-3/+2
Pull more block updates from Jens Axboe: "Most of this is fixes and not new code/features: - skd fix from Arnd, fixing a build error dependent on sla allocator type. - blk-mq scheduler discard merging fixes, one from me and one from Keith. This fixes a segment miscalculation for blk-mq-sched, where we mistakenly think two segments are physically contigious even though the request isn't carrying real data. Also fixes a bio-to-rq merge case. - Don't re-set a bit on the buffer_head flags, if it's already set. This can cause scalability concerns on bigger machines and workloads. From Kemi Wang. - Add BLK_STS_DEV_RESOURCE return value to blk-mq, allowing us to distuingish between a local (device related) resource starvation and a global one. The latter might happen without IO being in flight, so it has to be handled a bit differently. From Ming" * tag 'for-linus-20180204' of git://git.kernel.dk/linux-block: block: skd: fix incorrect linux/slab_def.h inclusion buffer: Avoid setting buffer bits that are already set blk-mq-sched: Enable merging discard bio into request blk-mq: fix discard merge with scheduler attached blk-mq: introduce BLK_STS_DEV_RESOURCE
2018-01-31Merge tag 'for-4.16/dm-changes' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - DM core fixes to ensure that bio submission follows a depth-first tree walk; this is critical to allow forward progress without the need to use the bioset's BIOSET_NEED_RESCUER. - Remove DM core's BIOSET_NEED_RESCUER based dm_offload infrastructure. - DM core cleanups and improvements to make bio-based DM more efficient (e.g. reduced memory footprint as well leveraging per-bio-data more). - Introduce new bio-based mode (DM_TYPE_NVME_BIO_BASED) that leverages the more direct IO submission path in the block layer; this mode is used by DM multipath and also optimizes targets like DM thin-pool that stack directly on NVMe data device. - DM multipath improvements to factor out legacy SCSI-only (e.g. scsi_dh) code paths to allow for more optimized support for NVMe multipath. - A fix for DM multipath path selectors (service-time and queue-length) to select paths in a more balanced way; largely academic but doesn't hurt. - Numerous DM raid target fixes and improvements. - Add a new DM "unstriped" target that enables Intel to workaround firmware limitations in some NVMe drives that are striped internally (this target also works when stacked above the DM "striped" target). - Various Documentation fixes and improvements. - Misc cleanups and fixes across various DM infrastructure and targets (e.g. bufio, flakey, log-writes, snapshot). * tag 'for-4.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (69 commits) dm cache: Documentation: update default migration_throttling value dm mpath selector: more evenly distribute ties dm unstripe: fix target length versus number of stripes size check dm thin: fix trailing semicolon in __remap_and_issue_shared_cell dm table: fix NVMe bio-based dm_table_determine_type() validation dm: various cleanups to md->queue initialization code dm mpath: delay the retry of a request if the target responded as busy dm mpath: return DM_MAPIO_DELAY_REQUEUE if QUEUE_IO or PG_INIT_REQUIRED dm mpath: return DM_MAPIO_REQUEUE on blk-mq rq allocation failure dm log writes: fix max length used for kstrndup dm: backfill missing calls to mutex_destroy() dm snapshot: use mutex instead of rw_semaphore dm flakey: check for null arg_name in parse_features() dm thin: extend thinpool status format string with omitted fields dm thin: fixes in thin-provisioning.txt dm thin: document representation of <highest mapped sector> when there is none dm thin: fix documentation relative to low water mark threshold dm cache: be consistent in specifying sectors and SI units in cache.txt dm cache: delete obsoleted paragraph in cache.txt dm cache: fix grammar in cache-policies.txt ...
2018-01-31blk-mq: introduce BLK_STS_DEV_RESOURCEMing Lei1-3/+2
This status is returned from driver to block layer if device related resource is unavailable, but driver can guarantee that IO dispatch will be triggered in future when the resource is available. Convert some drivers to return BLK_STS_DEV_RESOURCE. Also, if driver returns BLK_STS_RESOURCE and SCHED_RESTART is set, rerun queue after a delay (BLK_MQ_DELAY_QUEUE) to avoid IO stalls. BLK_MQ_DELAY_QUEUE is 3 ms because both scsi-mq and nvmefc are using that magic value. If a driver can make sure there is in-flight IO, it is safe to return BLK_STS_DEV_RESOURCE because: 1) If all in-flight IOs complete before examining SCHED_RESTART in blk_mq_dispatch_rq_list(), SCHED_RESTART must be cleared, so queue is run immediately in this case by blk_mq_dispatch_rq_list(); 2) if there is any in-flight IO after/when examining SCHED_RESTART in blk_mq_dispatch_rq_list(): - if SCHED_RESTART isn't set, queue is run immediately as handled in 1) - otherwise, this request will be dispatched after any in-flight IO is completed via blk_mq_sched_restart() 3) if SCHED_RESTART is set concurently in context because of BLK_STS_RESOURCE, blk_mq_delay_run_hw_queue() will cover the above two cases and make sure IO hang can be avoided. One invariant is that queue will be rerun if SCHED_RESTART is set. Suggested-by: Jens Axboe <axboe@kernel.dk> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-29dm: various cleanups to md->queue initialization codeMike Snitzer1-2/+0
Also, add dm_sysfs_init() error handling to dm_create(). Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-01-29dm mpath: delay the retry of a request if the target responded as busyMike Snitzer1-0/+4
Add DM_ENDIO_DELAY_REQUEUE to allow request-based multipath's multipath_end_io() to instruct dm-rq.c:dm_done() to delay a requeue. This is beneficial to do if BLK_STS_RESOURCE is returned from the target (because target is busy). Relative to blk-mq: kick the hw queues via blk_mq_requeue_work(), indirectly from dm-rq.c:__dm_mq_kick_requeue_list(), after a delay. For old .request_fn: use blk_delay_queue(). bio-based multipath doesn't have feature parity with request-based for retryable error requeues; that is something that'll need fixing in the future. Suggested-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Bart Van Assche <bart.vanassche@wdc.com> [as interpreted from Bart's "... patch looks fine to me."]
2018-01-17blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedbackMing Lei1-3/+16
blk_insert_cloned_request() is called in the fast path of a dm-rq driver (e.g. blk-mq request-based DM mpath). blk_insert_cloned_request() uses blk_mq_request_bypass_insert() to directly append the request to the blk-mq hctx->dispatch_list of the underlying queue. 1) This way isn't efficient enough because the hctx spinlock is always used. 2) With blk_insert_cloned_request(), we completely bypass underlying queue's elevator and depend on the upper-level dm-rq driver's elevator to schedule IO. But dm-rq currently can't get the underlying queue's dispatch feedback at all. Without knowing whether a request was issued or not (e.g. due to underlying queue being busy) the dm-rq elevator will not be able to provide effective IO merging (as a side-effect of dm-rq currently blindly destaging a request from its elevator only to requeue it after a delay, which kills any opportunity for merging). This obviously causes very bad sequential IO performance. Fix this by updating blk_insert_cloned_request() to use blk_mq_request_direct_issue(). blk_mq_request_direct_issue() allows a request to be issued directly to the underlying queue and returns the dispatch feedback (blk_status_t). If blk_mq_request_direct_issue() returns BLK_SYS_RESOURCE the dm-rq driver will now use DM_MAPIO_REQUEUE to _not_ destage the request. Whereby preserving the opportunity to merge IO. With this, request-based DM's blk-mq sequential IO performance is vastly improved (as much as 3X in mpath/virtio-scsi testing). Signed-off-by: Ming Lei <ming.lei@redhat.com> [blk-mq.c changes heavily influenced by Ming Lei's initial solution, but they were refactored to make them less fragile and easier to read/review] Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-15dm: fix incomplete request_queue initializationMike Snitzer1-9/+0
DM is no longer prone to having its request_queue be improperly initialized. Summary of changes: - defer DM's blk_register_queue() from add_disk()-time until dm_setup_md_queue() by using add_disk_no_queue_reg() in alloc_dev(). - dm_setup_md_queue() is updated to fully initialize DM's request_queue (_after_ all table loads have occurred and the request_queue's type, features and limits are known). A very welcome side-effect of these changes is DM no longer needs to: 1) backfill the "mq" sysfs entry (because historically DM didn't initialize the request_queue to use blk-mq until _after_ blk_register_queue() was called via add_disk()). 2) call elv_register_queue() to get .request_fn request-based DM device's "iosched" exposed in syfs. In addition, blk-mq debugfs support is now made available because request-based DM's blk-mq request_queue is now properly initialized before dm_setup_md_queue() calls blk_register_queue(). These changes also stave off the need to introduce new DM-specific workarounds in block core, e.g. this proposal: https://patchwork.kernel.org/patch/10067961/ In the end DM devices should be less unicorn in nature (relative to initialization and availability of block core infrastructure provided by the request_queue). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Tested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-06block: remove QUEUE_FLAG_STACKABLEChristoph Hellwig1-1/+1
We already have a queue_is_rq_based helper to check if a request_queue is request based, so we can remove the flag for it. Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-28dm rq: do not update rq partially in each ending bioMing Lei1-11/+7
We don't need to update the original dm request partially when ending each cloned bio: just update original dm request once when the whole cloned request is finished. This still allows full support for partial completion because a new 'completed' counter accounts for incremental progress as the clone bios complete. Partial request update can be a bit expensive, so we should try to avoid it, especially because it is run in softirq context. Avoiding all the partial request updates fixes both hard lockup and soft lockups that were easily reproduced while running Laurence's test[1] on IB/SRP. BTW, after d4acf3650c7c ("block: Make blk_mq_delay_kick_requeue_list() rerun the queue at a quiet time"), we need to make the test more aggressive for reproducing the lockup: 1) run hammer_write.sh 32 or 64 concurrently. 2) write 8M each time [1] https://marc.info/?l=linux-block&m=150220185510245&w=2 Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-08-28dm rq: make dm-sq requeuing behavior consistent with dm-mq behaviorBart Van Assche1-4/+5
DM_MAPIO_DELAY_REQUEUE causes dm-mq to requeue after a delay but causes dm-sq to requeue immediately. Make the behavior of dm-sq consistent with that of dm-mq. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-06-18blk-mq: use the introduced blk_mq_unquiesce_queue()Ming Lei1-1/+1
blk_mq_unquiesce_queue() is used for unquiescing the queue explicitly, so replace blk_mq_start_stopped_hw_queues() with it. For the scsi part, this patch takes Bart's suggestion to switch to block quiesce/unquiesce API completely. Cc: linux-nvme@lists.infradead.org Cc: linux-scsi@vger.kernel.org Cc: dm-devel@redhat.com Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-09block: switch bios to blk_status_tChristoph Hellwig1-1/+1
Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09blk-mq: switch ->queue_rq return value to blk_status_tChristoph Hellwig1-4/+4
Use the same values for use for request completion errors as the return value from ->queue_rq. BLK_STS_RESOURCE is special cased to cause a requeue, and all the others are completed as-is. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09block: introduce new block status code typeChristoph Hellwig1-10/+10
Currently we use nornal Linux errno values in the block layer, and while we accept any error a few have overloaded magic meanings. This patch instead introduces a new blk_status_t value that holds block layer specific status codes and explicitly explains their meaning. Helpers to convert from and to the previous special meanings are provided for now, but I suspect we want to get rid of them in the long run - those drivers that have a errno input (e.g. networking) usually get errnos that don't know about the special block layer overloads, and similarly returning them to userspace will usually return somethings that strictly speaking isn't correct for file system operations, but that's left as an exercise for later. For now the set of errors is a very limited set that closely corresponds to the previous overloaded errno values, but there is some low hanging fruite to improve it. blk_status_t (ab)uses the sparse __bitwise annotations to allow for sparse typechecking, so that we can easily catch places passing the wrong values. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-15dm rq: add a missing break to map_requestChristoph Hellwig1-0/+1
We don't want to bug when receiving a DM_MAPIO_KILL value.. Fixes: 412445ac ("dm: introduce a new DM_MAPIO_KILL return value") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-05-06Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-4/+3
Pull block fixes and updates from Jens Axboe: "Some fixes and followup features/changes that should go in, in this merge window. This contains: - Two fixes for lightnvm from Javier, fixing problems in the new code merge previously in this merge window. - A fix from Jan for the backing device changes, fixing an issue in NFS that causes a failure to mount on certain setups. - A change from Christoph, cleaning up the blk-mq init and exit request paths. - Remove elevator_change(), which is now unused. From Bart. - A fix for queue operation invocation on a dead queue, from Bart. - A series fixing up mtip32xx for blk-mq scheduling, removing a bandaid we previously had in place for this. From me. - A regression fix for this series, fixing a case where we wait on workqueue flushing from an invalid (non-blocking) context. From me. - A fix/optimization from Ming, ensuring that we don't both quiesce and freeze a queue at the same time. - A fix from Peter on lock ordering for CPU hotplug. Not a real problem right now, but will be once the CPU hotplug rework goes in. - A series from Omar, cleaning up out blk-mq debugfs support, and adding support for exporting info from schedulers in debugfs as well. This is really useful in debugging stalls or livelocks. From Omar" * 'for-linus' of git://git.kernel.dk/linux-block: (28 commits) mq-deadline: add debugfs attributes kyber: add debugfs attributes blk-mq-debugfs: allow schedulers to register debugfs attributes blk-mq: untangle debugfs and sysfs blk-mq: move debugfs declarations to a separate header file blk-mq: Do not invoke queue operations on a dead queue blk-mq-debugfs: get rid of a bunch of boilerplate blk-mq-debugfs: rename hw queue directories from <n> to hctx<n> blk-mq-debugfs: don't open code strstrip() blk-mq-debugfs: error on long write to queue "state" file blk-mq-debugfs: clean up flag definitions blk-mq-debugfs: separate flags with | nfs: Fix bdi handling for cloned superblocks block/mq: Cure cpu hotplug lock inversion lightnvm: fix bad back free on error path lightnvm: create cmd before allocating request blk-mq: don't use sync workqueue flushing from drivers mtip32xx: convert internal commands to regular block infrastructure mtip32xx: cleanup internal tag assumptions block: don't call blk_mq_quiesce_queue() after queue is frozen ...
2017-05-02blk-mq: update ->init_request and ->exit_request prototypesChristoph Hellwig1-4/+3
Remove the request_idx parameter, which can't be used safely now that we support I/O schedulers with blk-mq. Except for a superflous check in mtip32xx it was unused anyway. Also pass the tag_set instead of just the driver data - this allows drivers to avoid some code duplication in a follow on cleanup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-02dm: introduce a new DM_MAPIO_KILL return valueChristoph Hellwig1-7/+5
This untangles the DM_MAPIO_* values returned from ->clone_and_map_rq from the error codes used by the block layer. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-05-02dm rq: change ->rq_end_io calling conventionsChristoph Hellwig1-7/+10
Instead of returning either a DM_ENDIO_* constant or an error code, add a new DM_ENDIO_DONE value that means keep errno as is. This allows us to easily keep the existing error code in case where we can't push back, and it also preparares for the new block level status codes with strict type checking. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 12:34:21 +0300