| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Hi3660 mailbox controller is used to send message within multiple
processors, MCU, HIFI, etc. It supports 32 mailbox channels and every
channel can only be used for single transferring direction. Once the
channel is enabled, it needs to specify the destination interrupt and
acknowledge interrupt, these two interrupt vectors are used to create
the connection between the mailbox and interrupt controllers.
The data transferring supports two modes, one is named as "automatic
acknowledge" mode so after send message the kernel doesn't need to wait
for acknowledge from remote and directly return; there have another mode
is to rely on handling interrupt for acknowledge.
This commit is for initial version driver, which only supports
"automatic acknowledge" mode to support CPU clock, which is the only
one consumer to use mailbox and has been verified. Later may enhance
this driver for interrupt mode (e.g. for supporting HIFI).
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Ruyi Wang <wangruyi@huawei.com>
Signed-off-by: Kaihua Zhong <zhongkaihua@huawei.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
With the addition of the ARCH_TEGRA_194_SOC driver, we get a new Kconfig warning:
warning: (ARCH_TEGRA_186_SOC && ARCH_TEGRA_194_SOC) selects TEGRA_HSP_MBOX which has unmet direct dependencies (MAILBOX && ARCH_TEGRA_186_SOC)
It looks like the dependency is a bit too strict here, allowing the driver to
be built for any Tegra chip avoids the problem.
Fixes: 6f9ed07fde03 ("soc/tegra: Add Tegra194 SoC configuration option")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
By default, we build Broadcom FlexRM driver as loadable module for
iProc SOCs so that kernel image is little smaller and we load FlexRM
driver only when required.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The Broadcom FlexRM Mailbox is only present in the Broadcom IPROC SoCs.
Add depends on ARCH_BCM_IPROC to BCM_FLEXRX_MBOX.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
This implements a driver that exposes the IPC bits found in the APCS
Global block in various Qualcomm platforms. The bits are used to signal
inter-processor communication signals from the application CPU to other
masters.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The Broadcom FlexRM mailbox driver uses platform MSI support but
not all ARCHs provide asm/msi.h. Due to this, we get compilation
error in Broadcom FlexRM mailbox driver via linux/msi.h on ARCHs
which lack asm/msi.h.
This patch removes "depends on COMPILE_TEST" for Kconfig option
BCM_FLEXRM_MBOX so that Broadcom FlexRM mailbox driver is only
compiled for ARM64.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Some of the Broadcom iProc SoCs have FlexRM ring manager
which provides a ring-based programming interface to various
offload engines (e.g. RAID, Crypto, etc).
This patch adds a common mailbox driver for Broadcom FlexRM
ring manager which can be shared by various offload engine
drivers (implemented as mailbox clients).
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Pramod KUMAR <pramod.kumar@broadcom.com>
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Adds support for Northstar Plus (NS+) products to the PDC mailbox
driver. The PDC driver was originally written to support the PDC
ring manager in the Northstar2 (64-bit) device. The NS+ (32 bit
device) uses an almost identical ring manager, though with a
different name. We just need to check for the type of hardware in
use, in order to write the appropriate interrupt configuration register.
Also updated DMA width to be correct for both NS+ and NS2.
Tested on NS+ and NS2.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
This driver exposes a mailbox interface for interprocessor communication
using the Hardware Synchronization Primitives (HSP) module's doorbell
mechanism. There are multiple HSP instances and they provide additional
features such as shared mailboxes, shared and arbitrated semaphores.
A driver for a remote processor can use the mailbox client provided by
the HSP driver and build an IPC protocol on top of this synchronization
mechanism.
Based on work by Joseph Lo <josephl@nvidia.com>.
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add Message-Handling-Unit driver for platform variants as mailbox controller.
Actually, only the Amlogic Meson GXBB SoC MHU is supported.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Add HAS_DMA Kconfig dependency to BCM_PDC_MBOX to avoid link
error on some platforms.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Rob Rice <rrice@broadcom.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The Broadcom PDC mailbox driver is a mailbox controller that
manages data transfers to and from one or more offload engines.
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Support for TI Message Manager Module. This hardware block manages a
bunch of hardware queues meant for communication between processor
entities.
Clients sitting on top of this would manage the required protocol
for communicating with the counterpart entities.
For more details on TI Message Manager hardware block, see documentation
that will is available here: http://www.ti.com/lit/ug/spruhy8/spruhy8.pdf
Chapter 8.1(Message Manager)
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
This driver is found on RK3368 SoCs.
The Mailbox module is a simple APB peripheral that allows both
the Cortex-A53 MCU system to communicate by writing operation to
generate interrupt.
The registers are accessible by both CPU via APB interface.
The Mailbox has the following main features:
1) Support dual-core system: Cortex-A53 and MCU.
2) Support APB interface.
3) Support four mailbox elements, each element includes one data word,
one command word register and one flag bit that can represent
one interrupt.
4) Four interrupts to Cortex-A53.
5) Four interrupts to MCU.
6) Provide 32 lock registers for software to use to indicate whether
mailbox is occupied.
[Jassi: Removed unused variable buf_base]
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Add driver for Hi6220 mailbox, the mailbox communicates with MCU; for
sending data, it can support two methods for low level implementation:
one is to use interrupt as acknowledge, another is automatic mode which
without any acknowledge. These two methods have been supported in the
driver. For receiving data, it will depend on the interrupt to notify
the channel has incoming message.
Now mailbox driver is used to send message to MCU to control dynamic
voltage and frequency scaling for CPU, GPU and DDR.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
X-Gene mailbox controller provides 8 mailbox channels, with
each channel has a dedicated interrupt line.
Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Duc Dang <dhdang@apm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Not every arch has io memory.
So, unbreak the build by fixing the dependencies.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
This particular Client implementation uses shared memory in order
to pass messages between Mailbox users; however, it can be easily
hacked to support any type of Controller.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
ST's platforms currently support a maximum of 5 Mailboxes, one for
each of the supported co-processors situated on the platform. Each
Mailbox is divided up into 4 instances which consist of 32 channels.
Messages are passed between the application and co-processors using
shared memory areas. It is the Client's responsibility to manage
these areas.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
PCC is made selectable only by clients which use it. e.g. CPPC
Default it to disabled so that it is not included accidentally on
platforms which dont use it.
Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Reviewed-by: Al Stone <al.stone@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This mailbox driver provides a single mailbox channel to write 32-bit
values to the VPU and get a 32-bit response. The Raspberry Pi
firmware uses this mailbox channel to implement firmware calls, while
Roku 2 (despite being derived from the same firmware tree) doesn't.
The driver was originally submitted by Lubomir, based on the
out-of-tree 2708 mailbox driver. Eric Anholt fixed it up for
upstreaming, with the major functional change being that it now has no
notion of multiple channels (since that is a firmware-dependent
concept) and instead the raspberrypi-firmware driver will do that
bit-twiddling in its own messages.
[Jassi: made the 'mbox_chan_ops' struct as const and removed a redundant
variable]
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Craig McGeachie <slapdau@yahoo.com.au>
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Not all architectures have io memory.
Fixes:
drivers/built-in.o: In function `altera_mbox_probe':
mailbox-altera.c:(.text+0x409fd2): undefined reference to `devm_ioremap_resource'
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Add driver for the ARM Primecell Message-Handling-Unit(MHU) controller.
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
Signed-off-by: Vincent Yang <vincent.yang@socionext.com>
Signed-off-by: Tetsuya Nuriya <nuriya.tetsuya@socionext.com>
|
|
The Altera mailbox allows for interprocessor communication. It supports
only one channel and work as either sender or receiver.
Signed-off-by: Ley Foon Tan <lftan@altera.com>
|
|
ACPI 5.0+ spec defines a generic mode of communication
between the OS and a platform such as the BMC. This medium
(PCC) is typically used by CPPC (ACPI CPU Performance management),
RAS (ACPI reliability protocol) and MPST (ACPI Memory power
states).
This patch adds PCC support as a Mailbox Controller. As of
ACPI v5.1 there is no provision for clients to lookup mailbox
controllers in a way that Linux expects. e.g. in DT the clients
can list the mailboxes they can associate with in the DT binding
and then provide a unique index to lookup a channel within a mailbox.
Since the ACPI spec doesn't have anything similar, we introduce a
mailbox controller specific API so that when the client calls it,
we know to lookup in the context of a specific controller. This
also helps in keeping a consistent interface across DT and ACPI
for such drivers.
This patch implements basic PCC support using the ACPI v5.1
structures. IRQ mode support will be provided as follow up patches.
Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
There is no need for a separate common OMAP mailbox module
now that the OMAP1 mailbox driver has been removed. So,
consolidate the two individual OMAP mailbox modules into a
single driver. This streamlines the driver for converting
to mailbox framework.
The following are the main changes:
- collapse mailbox-omap2.c into omap-mailbox.c
- remove omap_mbox_ops and replace the ops calls with
the equivalent functionality.
- simplify the sub-mailbox startup/shutdown functionality,
the one-time operations are moved into probe, and the
pm_runtime_get_sync and pm_runtime_put_sync can be invoked
without using a configuration counter.
- move all definitions from private omap_mbox.h into the
source code, and eliminate this internal header.
- rename some variables that used the omap2_mbox prefix with
a generic omap_mbox prefix.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
There are no existing users for OMAP1 mailbox driver
in kernel. Commit ab6f775 "Removing dead OMAP_DSP"
has cleaned up all the dead code related to the only
possible user, including the creation of the mailbox
platform device.
Remove this stale driver so that the OMAP mailbox
driver can be simplified and streamlined better for
converting to mailbox framework.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The mailbox hardware (in OMAP) uses a queued mailbox interrupt
mechanism that provides a communication channel between processors
through a set of registers and their associated interrupt signals
by sending and receiving messages.
The OMAP mailbox framework/driver code is moved to be under
drivers/mailbox, in preparation for adapting to a common mailbox
driver framework. This allows the build for OMAP mailbox to be
enabled (it was disabled during the multi-platform support).
As part of the migration from plat and mach code:
- Kconfig symbols have been renamed to build OMAP1 or OMAP2+ drivers.
- mailbox.h under plat-omap/plat/include has been split into a public
and private header files. The public header has only the API related
functions and types.
- The module name mailbox.ko from plat-omap is changed to
omap-mailbox.ko
- The module name mailbox_mach.ko from mach-omapX is changed as
mailbox_omap1.ko for OMAP1
mailbox_omap2.ko for OMAP2+
Cc: Tony Lindgren <tony@atomide.com>
[gregkh@linuxfoundation.org: ack for staging part]
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
|
|
The pl320 IPC allows for interprocessor communication between the
highbank A9 and the EnergyCore Management Engine. The pl320 implements
a straightforward mailbox protocol.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
