summaryrefslogtreecommitdiff
path: root/drivers/lguest
AgeCommit message (Collapse)AuthorFilesLines
2016-11-01x86/fpu, lguest: Remove CR0.TS supportAndy Lutomirski3-23/+1
Now that Linux never sets CR0.TS, lguest doesn't need to support it. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Rik van Riel <riel@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm list <kvm@vger.kernel.org> Link: http://lkml.kernel.org/r/8a7bf2c11231c082258fd67705d0f275639b8475.1477951965.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-13Merge branch 'x86/urgent' into x86/asm to pick up dependent fixesIngo Molnar3-2/+11
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-01lguest, x86/entry/32: Fix handling of guest syscalls using interrupt gatesRusty Russell3-2/+11
In a798f091113e ("x86/entry/32: Change INT80 to be an interrupt gate") Andy broke lguest. This is because lguest had special code to allow the 0x80 trap gate go straight into the guest itself; interrupts gates (without more work, as mentioned in the file's comments) bounce via the hypervisor. His change made them go via the hypervisor, but as it's in the range of normal hardware interrupts, they were not directed through to the guest at all. Turns out the guest userspace isn't very effective if syscalls are all noops. I haven't ripped out all the now-useless trap-direct-to-guest-kernel code yet, since it will still be needed if someone decides to update this optimization. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Weisbecker <fweisbec@gmail.com> Cc: x86\@kernel.org Link: http://lkml.kernel.org/r/87fuv685kl.fsf@rustcorp.com.au Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-31x86/cpufeature: Remove cpu_has_pgeBorislav Petkov1-1/+1
Use static_cpu_has() in __flush_tlb_all() due to the time-sensitivity of this one. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1459266123-21878-10-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-12lguest: Map switcher text R/ORusty Russell1-23/+51
Pavel noted that lguest maps the switcher code executable and read-write. This is a bad idea for any kernel text, but particularly for text mapped at a fixed address. Create two vmas, one for the text (PAGE_KERNEL_RX) and another for the stacks (PAGE_KERNEL). Use VM_NO_GUARD to map them adjacent (as expected by the rest of the code). Reported-by: Pavel Machek <pavel@ucw.cz> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-23Merge branch 'x86-core-for-linus' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 core updates from Ingo Molnar: "There were so many changes in the x86/asm, x86/apic and x86/mm topics in this cycle that the topical separation of -tip broke down somewhat - so the result is a more traditional architecture pull request, collected into the 'x86/core' topic. The topics were still maintained separately as far as possible, so bisectability and conceptual separation should still be pretty good - but there were a handful of merge points to avoid excessive dependencies (and conflicts) that would have been poorly tested in the end. The next cycle will hopefully be much more quiet (or at least will have fewer dependencies). The main changes in this cycle were: * x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas Gleixner) - This is the second and most intrusive part of changes to the x86 interrupt handling - full conversion to hierarchical interrupt domains: [IOAPIC domain] ----- | [MSI domain] --------[Remapping domain] ----- [ Vector domain ] | (optional) | [HPET MSI domain] ----- | | [DMAR domain] ----------------------------- | [Legacy domain] ----------------------------- This now reflects the actual hardware and allowed us to distangle the domain specific code from the underlying parent domain, which can be optional in the case of interrupt remapping. It's a clear separation of functionality and removes quite some duct tape constructs which plugged the remap code between ioapic/msi/hpet and the vector management. - Intel IOMMU IRQ remapping enhancements, to allow direct interrupt injection into guests (Feng Wu) * x86/asm changes: - Tons of cleanups and small speedups, micro-optimizations. This is in preparation to move a good chunk of the low level entry code from assembly to C code (Denys Vlasenko, Andy Lutomirski, Brian Gerst) - Moved all system entry related code to a new home under arch/x86/entry/ (Ingo Molnar) - Removal of the fragile and ugly CFI dwarf debuginfo annotations. Conversion to C will reintroduce many of them - but meanwhile they are only getting in the way, and the upstream kernel does not rely on them (Ingo Molnar) - NOP handling refinements. (Borislav Petkov) * x86/mm changes: - Big PAT and MTRR rework: making the code more robust and preparing to phase out exposing direct MTRR interfaces to drivers - in favor of using PAT driven interfaces (Toshi Kani, Luis R Rodriguez, Borislav Petkov) - New ioremap_wt()/set_memory_wt() interfaces to support Write-Through cached memory mappings. This is especially important for good performance on NVDIMM hardware (Toshi Kani) * x86/ras changes: - Add support for deferred errors on AMD (Aravind Gopalakrishnan) This is an important RAS feature which adds hardware support for poisoned data. That means roughly that the hardware marks data which it has detected as corrupted but wasn't able to correct, as poisoned data and raises an APIC interrupt to signal that in the form of a deferred error. It is the OS's responsibility then to take proper recovery action and thus prolonge system lifetime as far as possible. - Add support for Intel "Local MCE"s: upcoming CPUs will support CPU-local MCE interrupts, as opposed to the traditional system- wide broadcasted MCE interrupts (Ashok Raj) - Misc cleanups (Borislav Petkov) * x86/platform changes: - Intel Atom SoC updates ... and lots of other cleanups, fixlets and other changes - see the shortlog and the Git log for details" * 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits) x86/hpet: Use proper hpet device number for MSI allocation x86/hpet: Check for irq==0 when allocating hpet MSI interrupts x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail genirq: Prevent crash in irq_move_irq() genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain iommu, x86: Properly handle posted interrupts for IOMMU hotplug iommu, x86: Provide irq_remapping_cap() interface iommu, x86: Setup Posted-Interrupts capability for Intel iommu iommu, x86: Add cap_pi_support() to detect VT-d PI capability iommu, x86: Avoid migrating VT-d posted interrupts iommu, x86: Save the mode (posted or remapped) of an IRTE iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip iommu: dmar: Provide helper to copy shared irte fields iommu: dmar: Extend struct irte for VT-d Posted-Interrupts iommu: Add new member capability to struct irq_remap_ops x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry() ...
2015-06-23Merge branch 'x86-fpu-for-linus' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 FPU updates from Ingo Molnar: "This tree contains two main changes: - The big FPU code rewrite: wide reaching cleanups and reorganization that pulls all the FPU code together into a clean base in arch/x86/fpu/. The resulting code is leaner and faster, and much easier to understand. This enables future work to further simplify the FPU code (such as removing lazy FPU restores). By its nature these changes have a substantial regression risk: FPU code related bugs are long lived, because races are often subtle and bugs mask as user-space failures that are difficult to track back to kernel side backs. I'm aware of no unfixed (or even suspected) FPU related regression so far. - MPX support rework/fixes. As this is still not a released CPU feature, there were some buglets in the code - should be much more robust now (Dave Hansen)" * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (250 commits) x86/fpu: Fix double-increment in setup_xstate_features() x86/mpx: Allow 32-bit binaries on 64-bit kernels again x86/mpx: Do not count MPX VMAs as neighbors when unmapping x86/mpx: Rewrite the unmap code x86/mpx: Support 32-bit binaries on 64-bit kernels x86/mpx: Use 32-bit-only cmpxchg() for 32-bit apps x86/mpx: Introduce new 'directory entry' to 'addr' helper function x86/mpx: Add temporary variable to reduce masking x86: Make is_64bit_mm() widely available x86/mpx: Trace allocation of new bounds tables x86/mpx: Trace the attempts to find bounds tables x86/mpx: Trace entry to bounds exception paths x86/mpx: Trace #BR exceptions x86/mpx: Introduce a boot-time disable flag x86/mpx: Restrict the mmap() size check to bounds tables x86/mpx: Remove redundant MPX_BNDCFG_ADDR_MASK x86/mpx: Clean up the code by not passing a task pointer around when unnecessary x86/mpx: Use the new get_xsave_field_ptr()API x86/fpu/xstate: Wrap get_xsave_addr() to make it safer x86/fpu/xstate: Fix up bad get_xsave_addr() assumptions ...
2015-06-03Merge branches 'x86/mm', 'x86/build', 'x86/apic' and 'x86/platform' into ↵Ingo Molnar1-5/+5
x86/core, to apply dependent patch Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-27lguest: fix out-by-one error in address checking.Rusty Russell1-1/+1
This bug has been there since day 1; addresses in the top guest physical page weren't considered valid. You could map that page (the check in check_gpte() is correct), but if a guest tried to put a pagetable there we'd check that address manually when walking it, and kill the guest. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-05-19x86/fpu: Pass 'struct fpu' to fpu__restore()Ingo Molnar1-1/+1
This cleans up the call sites and the function a bit, and also makes it more symmetric with the other high level FPU state handling functions. It's still only valid for the current task, as we copy to the FPU registers of the current CPU. No change in functionality. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-19x86/fpu: Rename user_has_fpu() to fpregs_active()Ingo Molnar1-3/+3
Rename this function in line with the new FPU nomenclature. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-19x86/fpu: Move various internal function prototypes to fpu/internal.hIngo Molnar1-1/+1
There are a number of FPU internal function prototypes and an inline function in fpu/api.h, mostly placed so historically as the code grew over the years. Move them over into fpu/internal.h where they belong. (Add sched.h include to stackprotector.h which incorrectly relied on getting it from fpu/api.h.) fpu/api.h is now a pure file that only contains FPU APIs intended for driver use. Reviewed-by: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-19x86/fpu: Rename i387.h to fpu/api.hIngo Molnar1-1/+1
We already have fpu/types.h, move i387.h to fpu/api.h. The file name has become a misnomer anyway: it offers generic FPU APIs, but is not limited to i387 functionality. Reviewed-by: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-19x86/fpu: Rename math_state_restore() to fpu__restore()Ingo Molnar1-2/+2
Move to the new fpu__*() namespace. Reviewed-by: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-11x86/asm/entry: Fix remaining use of SYSCALL_VECTORIngo Molnar1-5/+5
Commit: 51bb92843edc ("x86/asm/entry: Remove SYSCALL_VECTOR") Converted most uses of SYSCALL_VECTOR to IA32_SYSCALL_VECTOR, but forgot about lguest. Cc: Brian Gerst <brgerst@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1431185813-15413-4-git-send-email-brgerst@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-22Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds4-34/+86
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio updates from Rusty Russell: "Some virtio internal cleanups, a new virtio device "virtio input", and a change to allow the legacy virtio balloon. Most excitingly, some lguest work! No seriously, I got some cleanup patches" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio: drop virtio_device_is_legacy_only virtio_pci: support non-legacy balloon devices virtio_mmio: support non-legacy balloon devices virtio_ccw: support non-legacy balloon devices virtio: balloon might not be a legacy device virtio_balloon: transitional interface virtio_ring: Update weak barriers to use dma_wmb/rmb virtio_pci_modern: switch to type-safe io accessors virtio_pci_modern: type-safe io accessors lguest: handle traps on the "interrupt suppressed" iret instruction. virtio: drop a useless config read virtio_config: reorder functions Add virtio-input driver. lguest: suppress interrupts for single insn, not range. lguest: simplify lguest_iret lguest: rename i386_head.S in the comments lguest: explicitly set miscdevice's private_data NULL lguest: fix pending interrupt test.
2015-04-01lguest: now needs PCI_DIRECT.Rusty Russell1-1/+1
Since commit 8e7094694396 ("lguest: add a dummy PCI host bridge.") lguest uses PCI, but it needs you to frob the ports directly. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-01lguest: handle traps on the "interrupt suppressed" iret instruction.Rusty Russell1-27/+72
Lguest's "iret" is non-atomic, as it needs to restore the interrupt state before the real iret (the guest can't actually suppress interrupts). For this reason, the host discards an interrupt if it occurs in this (1-instruction) window. We can do better, by emulating the iret execution, then immediately setting up the interrupt handler. In fact, we don't need to do much, as emulating the iret and setting up th stack for the interrupt handler basically cancel each other out. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-03-24lguest: suppress interrupts for single insn, not range.Rusty Russell3-8/+7
The last patch reduced our interrupt-suppression region to one address, so simplify the code somewhat. Also, remove the obsolete undefined instruction ranges and the comment which refers to lguest_guest.S instead of head_32.S. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-03-24lguest: explicitly set miscdevice's private_data NULLMartin Kepplinger1-0/+8
There is a proposed change to the miscdevice's behaviour on open(). Currently file->private_data stays NULL, but only because we don't have an open-entry in struct file_operations. This may change so that private_data, more consistently, is always set to struct miscdevice, not only *if* the driver has it's own open() routine and fops-entry, see https://lkml.org/lkml/2014/12/4/939 and commit 94e4fe2cab3d43b3ba7c3f721743006a8c9d913a In short: If we rely on file->private_data being NULL, we should ensure it is NULL ourselves. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-18Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds8-847/+252
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio updates from Rusty Russell: "OK, this has the big virtio 1.0 implementation, as specified by OASIS. On top of tht is the major rework of lguest, to use PCI and virtio 1.0, to double-check the implementation. Then comes the inevitable fixes and cleanups from that work" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (80 commits) virtio: don't set VIRTIO_CONFIG_S_DRIVER_OK twice. virtio_net: unconditionally define struct virtio_net_hdr_v1. tools/lguest: don't use legacy definitions for net device in example launcher. virtio: Don't expose legacy net features when VIRTIO_NET_NO_LEGACY defined. tools/lguest: use common error macros in the example launcher. tools/lguest: give virtqueues names for better error messages tools/lguest: more documentation and checking of virtio 1.0 compliance. lguest: don't look in console features to find emerg_wr. tools/lguest: don't start devices until DRIVER_OK status set. tools/lguest: handle indirect partway through chain. tools/lguest: insert driver references from the 1.0 spec (4.1 Virtio Over PCI) tools/lguest: insert device references from the 1.0 spec (4.1 Virtio Over PCI) tools/lguest: rename virtio_pci_cfg_cap field to match spec. tools/lguest: fix features_accepted logic in example launcher. tools/lguest: handle device reset correctly in example launcher. virtual: Documentation: simplify and generalize paravirt_ops.txt lguest: remove NOTIFY call and eventfd facility. lguest: remove NOTIFY facility from demonstration launcher. lguest: use the PCI console device's emerg_wr for early boot messages. lguest: always put console in PCI slot #1. ...
2015-02-11lguest: remove NOTIFY call and eventfd facility.Rusty Russell4-213/+9
Disappointing, as this was kind of neat (especially getting to use RCU to manage the address -> eventfd mapping). But now the devices are PCI handled in userspace, we get rid of both the NOTIFY hypercall and the interface to connect an eventfd. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: remove support for lguest bus.Rusty Russell2-543/+0
The demonstration launcher now uses PCI entirely. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: add iomem region, where guest page faults get sent to userspace.Rusty Russell4-6/+56
This lets us implement PCI. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: send trap 13 through to userspace.Rusty Russell1-90/+43
We copy 7 bytes at eip for userspace's instruction decode; we have to carefully handle the case where eip is at the end of a page. We can't leave this to userspace since kernel has all the page table decode logic. The decode logic moves to userspace, basically unchanged. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: add infrastructure to check mappings.Rusty Russell2-13/+30
We normally abort the guest unconditionally when it gives us a bad address, but in the next patch we want to copy some bytes which may not be mapped. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: add infrastructure for userspace to deliver a trap to the guest.Rusty Russell1-0/+19
This is required for instruction emulation to move to userspace. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: write more information to userspace about pending traps.Rusty Russell4-12/+19
This is preparation for userspace handling MMIO and ioport accesses. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: add operations to get/set a register from the Launcher.Rusty Russell4-0/+106
We use the ptrace API struct, and we currently don't let them set anything but the normal registers (we'd have to filter the others). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-04x86: Clean up cr4 manipulationAndy Lutomirski1-2/+3
CR4 manipulation was split, seemingly at random, between direct (write_cr4) and using a helper (set/clear_in_cr4). Unfortunately, the set_in_cr4 and clear_in_cr4 helpers also poke at the boot code, which only a small subset of users actually wanted. This patch replaces all cr4 access in functions that don't leave cr4 exactly the way they found it with new helpers cr4_set_bits, cr4_clear_bits, and cr4_set_bits_and_update_boot. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Vince Weaver <vince@deater.net> Cc: "hillf.zj" <hillf.zj@alibaba-inc.com> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/495a10bdc9e67016b8fd3945700d46cfd5c12c2f.1414190806.git.luto@amacapital.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-09virtio: allow finalize_features to failMichael S. Tsirkin1-1/+3
This will make it easy for transports to validate features and return failure. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-09virtio: assert 32 bit features in transportsMichael S. Tsirkin1-0/+3
At this point, no transports set any of the high 32 feature bits. Since transports generally can't (yet) cope with such bits, add BUG_ON checks to make sure they are not set by mistake. Based on rproc patch by Rusty. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09virtio: add support for 64 bit features.Michael S. Tsirkin1-1/+1
Change u32 to u64, and use BIT_ULL and 1ULL everywhere. Note: transports are unchanged, and only set low 32 bit. This guarantees that no transport sets e.g. VERSION_1 by mistake without proper support. Based on patch by Rusty. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09virtio: use u32, not bitmap for featuresMichael S. Tsirkin1-4/+4
It seemed like a good idea to use bitmap for features in struct virtio_device, but it's actually a pain, and seems to become even more painful when we get more than 32 feature bits. Just change it to a u32 for now. Based on patch by Rusty. Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-08-07mm/vmalloc.c: clean up map_vm_area third argumentWANG Chao1-5/+2
Currently map_vm_area() takes (struct page *** pages) as third argument, and after mapping, it moves (*pages) to point to (*pages + nr_mappped_pages). It looks like this kind of increment is useless to its caller these days. The callers don't care about the increments and actually they're trying to avoid this by passing another copy to map_vm_area(). The caller can always guarantee all the pages can be mapped into vm_area as specified in first argument and the caller only cares about whether map_vm_area() fails or not. This patch cleans up the pointer movement in map_vm_area() and updates its callers accordingly. Signed-off-by: WANG Chao <chaowang@redhat.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-08drivers/lguest/page_tables.c: rename do_set_pte()Andrew Morton1-3/+3
"mm: introduce vm_ops->map_pages()" wants to export a do_set_pte() from core kernel. Rename lguest's do_set_pte() to something more lguest-specific. Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-07x86, asmlinkage, lguest: Pass in globals into assembler statementAndi Kleen1-2/+4
Tell the compiler that the inline assembler statement references lguest_entry. This fixes compile problems with LTO where the variable and the assembler code may end up in different files. Cc: x86@kernel.org Cc: rusty@rustcorp.com.au Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-10-29virtio_ring: change host notification APIHeinz Graalfs1-1/+2
Currently a host kick error is silently ignored and not reflected in the virtqueue of a particular virtio device. Changing the notify API for guest->host notification seems to be one prerequisite in order to be able to handle such errors in the context where the kick is triggered. This patch changes the notify API. The notify function must return a bool return value. It returns false if the host notification failed. Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-09-06lguest: fix guest kernel stack overflow when TF bit set.Rusty Russell1-0/+10
The symptoms are that running gdb on a binary causes the guest to overflow the kernels stack (after some period of time), resulting in it finally being killed with a "Bad address" message. Reported-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-09-06lguest: fix BUG_ON() in invalid guest page table.Rusty Russell1-1/+3
If we discover the entry is invalid, we kill the guest, but we must avoid calling gpte_addr() on the invalid pmd, otherwise: kernel BUG at drivers/lguest/page_tables.c:157! Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-04Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual stuff from trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) treewide: relase -> release Documentation/cgroups/memory.txt: fix stat file documentation sysctl/net.txt: delete reference to obsolete 2.4.x kernel spinlock_api_smp.h: fix preprocessor comments treewide: Fix typo in printk doc: device tree: clarify stuff in usage-model.txt. open firmware: "/aliasas" -> "/aliases" md: bcache: Fixed a typo with the word 'arithmetic' irq/generic-chip: fix a few kernel-doc entries frv: Convert use of typedef ctl_table to struct ctl_table sgi: xpc: Convert use of typedef ctl_table to struct ctl_table doc: clk: Fix incorrect wording Documentation/arm/IXP4xx fix a typo Documentation/networking/ieee802154 fix a typo Documentation/DocBook/media/v4l fix a typo Documentation/video4linux/si476x.txt fix a typo Documentation/virtual/kvm/api.txt fix a typo Documentation/early-userspace/README fix a typo Documentation/video4linux/soc-camera.txt fix a typo lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment ...
2013-06-26x86, flags: Rename X86_EFLAGS_BIT1 to X86_EFLAGS_FIXEDH. Peter Anvin1-1/+1
Bit 1 in the x86 EFLAGS is always set. Name the macro something that actually tries to explain what it is all about, rather than being a tautology. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Gleb Natapov <gleb@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lkml.kernel.org/n/tip-f10rx5vjjm6tfnt8o1wseb3v@git.kernel.org
2013-05-29lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in commentPaul Bolle1-1/+1
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-08lguest: clear cached last cpu when guest_set_pgd() called.Rusty Russell1-0/+1
commit v3.9-rc1-53-g6d0cda9 "lguest: cache last cpu we ran on." missed one case, which causes a triple fault. The guest calls guest_set_pgd() on the top page, and we carefully remap the Switcher text page. But we didn't reset last_host_cpu, so map_switcher_in_guest() thinks the guest's regs and IDT/GDT etc are already mapped. Reported-by: Paul Bolle <pebolle@tiscali.nl> Tested-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-05-03Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds6-311/+347
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio & lguest updates from Rusty Russell: "Lots of virtio work which wasn't quite ready for last merge window. Plus I dived into lguest again, reworking the pagetable code so we can move the switcher page: our fixmaps sometimes take more than 2MB now..." Ugh. Annoying conflicts with the tcm_vhost -> vhost_scsi rename. Hopefully correctly resolved. * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (57 commits) caif_virtio: Remove bouncing email addresses lguest: improve code readability in lg_cpu_start. virtio-net: fill only rx queues which are being used lguest: map Switcher below fixmap. lguest: cache last cpu we ran on. lguest: map Switcher text whenever we allocate a new pagetable. lguest: don't share Switcher PTE pages between guests. lguest: expost switcher_pages array (as lg_switcher_pages). lguest: extract shadow PTE walking / allocating. lguest: make check_gpte et. al return bool. lguest: assume Switcher text is a single page. lguest: rename switcher_page to switcher_pages. lguest: remove RESERVE_MEM constant. lguest: check vaddr not pgd for Switcher protection. lguest: prepare to make SWITCHER_ADDR a variable. virtio: console: replace EMFILE with EBUSY for already-open port virtio-scsi: reset virtqueue affinity when doing cpu hotplug virtio-scsi: introduce multiqueue support virtio-scsi: push vq lock/unlock into virtscsi_vq_done virtio-scsi: pass struct virtio_scsi to virtqueue completion function ...
2013-04-30lguest: rename random32() to prandom_u32()Akinobu Mita1-1/+1
Use preferable function name which implies using a pseudo-random number generator. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30lguest: improve code readability in lg_cpu_start.Cosmin Paraschiv1-3/+3
Make the container_of call friendlier and fix some comment slip-ups. Signed-off-by: Cosmin Paraschiv <csmnprschv@gmail.com> Cc: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22lguest: map Switcher below fixmap.Rusty Russell1-10/+5
Now we've adjusted all the code, we can simply set switcher_addr to wherever it needs to go below the fixmaps, rather than asserting that it should be so. With large NR_CPUS and PAE, people were hitting the "mapping switcher would thwack fixmap" message. Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22lguest: cache last cpu we ran on.Rusty Russell2-25/+54
This optimizes the frobbing of our Switcher map. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22lguest: map Switcher text whenever we allocate a new pagetable.Rusty Russell2-10/+33
It's always to same, so no need to put in the PTE every time we're about to run. Keep a flag to track whether the pagetable has the Switcher entries allocated, and when allocating always initialize the Switcher text PTE. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>