summaryrefslogtreecommitdiff
path: root/drivers/leds
AgeCommit message (Collapse)AuthorFilesLines
2022-10-24leds: simatic-ipc-leds-gpio: fix incorrect LED to GPIO mappingHenning Schild1-6/+6
For apollolake the mapping between LEDs and GPIO pins was off because of a refactoring when we introduced a new device model. In addition to the reordering the indices in the lookup table need to be updated as well. Fixes: a97126265dfe ("leds: simatic-ipc-leds-gpio: add new model 227G") Signed-off-by: Henning Schild <henning.schild@siemens.com> Link: https://lore.kernel.org/r/20221024092027.4529-1-henning.schild@siemens.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-10-14Merge tag 'leds-6.1-rc1' of ↵Linus Torvalds1-2/+20
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "This is very quiet release for LEDs, pca963 got blinking support and that's pretty much it" * tag 'leds-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: pca963: fix misleading indentation dt-bindings: leds: Document mmc trigger leds: pca963x: fix blink with hw acceleration
2022-10-05Merge tag 'platform-drivers-x86-v6.1-1' of ↵Linus Torvalds1-5/+37
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: - AMD Platform Management Framework (PMF) driver with AMT and QnQF support - AMD PMC: Improved logging for debugging s2idle issues - Big refactor of the ACPI/x86 backlight handling, ensuring that we only register 1 /sys/class/backlight device per LCD panel - Microsoft Surface: - Surface Laptop Go 2 support - Surface Pro 8 HID sensor support - Asus WMI: - Lots of cleanups - Support for TUF RGB keyboard backlight control - Add support for ROG X13 tablet mode - Siemens Simatic: IPC227G and IPC427G support - Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support - tools/power/x86/intel-speed-select: Various improvements - Various cleanups - Various small bugfixes * tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (153 commits) platform/x86: use PLATFORM_DEVID_NONE instead of -1 platform/x86/amd: pmc: Dump idle mask during "check" stage instead platform/x86/intel/wmi: thunderbolt: Use dev_groups callback platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks platform/surface: Split memcpy() of struct ssam_event flexible array platform/x86: compal-laptop: Get rid of a few forward declarations platform/x86: intel-uncore-freq: Use sysfs_emit() to instead of scnprintf() platform/x86: dell-smbios-base: Use sysfs_emit() platform/x86/amd/pmf: Remove unused power_delta instances platform/x86/amd/pmf: install notify handler after acpi init Documentation/ABI/testing/sysfs-amd-pmf: Add ABI doc for AMD PMF platform/x86/amd/pmf: Add sysfs to toggle CnQF platform/x86/amd/pmf: Add support for CnQF platform/x86/amd: pmc: Fix build without debugfs platform/x86: hp-wmi: Support touchpad on/off platform/x86: int3472/discrete: Drop a forward declaration platform/x86: toshiba_acpi: change turn_on_panel_on_resume to static platform/x86: wmi: Drop forward declaration of static functions platform/x86: toshiba_acpi: Remove duplicate include platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading ...
2022-09-27leds: pca963: fix misleading indentationPavel Machek1-1/+1
I'm getting warnings: /tmp/next/build/drivers/leds/leds-pca963x.c: In function 'pca963x_register_leds': /tmp/next/build/drivers/leds/leds-pca963x.c:355:3: error: this 'if' clause does not guard... +[-Werror=misleading-indentation] 355 | if (hw_blink) | ^~ /tmp/next/build/drivers/leds/leds-pca963x.c:357:4: note: ...this statement, but the latter is +misleadingly indented as if it were guarded by the 'if' 357 | led->blinking = false; | ^~~ cc1: all warnings being treated as errors Fix the indentation to make them go away. Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-09-21leds: pca963x: fix blink with hw accelerationBernardo Rodrigues1-2/+20
LEDs would behave differently depending on the blink hardware acceleration configuration. This commit will make LEDs respond exactly the same independently of the hardware acceleration status. In other words, if you had two pca963x, side by side, one with blink hardware acceleration "ON" and the other "OFF; and performed some arbitrary sequence of API calls (e.g. turn on/off, change brightness, change blink mode, etc.) you probably would end with not matching LED states. 'pca963x software blink' and 'leds-gpio' behavior were used as reference. Actual chip used to validate this change: pca9634 Some of the unmatched behaviors being fixed are (when hw blink was "ON") - Leds would stop blinking when the brightness was changed. - Leds would persist their blinking mode even after being turned off (brightness = 0). - Leds would only blink if another led was solid (pca963x will be forced out of low power) Signed-off-by: Bernardo Rodrigues <bernardocrodrigues@live.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-09-10leds: simatic-ipc-leds-gpio: Make simatic_ipc_led_gpio_table staticHans de Goede1-1/+1
simatic_ipc_led_gpio_table is only used inside simatic-ipc-leds-gpio.c, make it static. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220910085836.84962-1-hdegoede@redhat.com
2022-09-01leds: simatic-ipc-leds-gpio: add new model 227GHenning Schild1-5/+37
This adds support of the Siemens Simatic IPC227G. Its LEDs are connected to GPIO pins provided by the gpio-f7188x module. We make sure that gets loaded, if not enabled in the kernel config no LED support will be available. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Henning Schild <henning.schild@siemens.com> Link: https://lore.kernel.org/r/20220825104422.14156-6-henning.schild@siemens.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-08-16i2c: Make remove callback return voidUwe Kleine-König25-72/+26
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16leds: lm3601x: Improve error reporting for problems during .remove()Uwe Kleine-König1-3/+8
Returning an error value in an i2c remove callback results in a generic error message being emitted by the i2c core, but otherwise it doesn't make a difference. The device goes away anyhow and the devm cleanups are called. So instead of triggering the generic i2c error message, emit a more helpful message if a problem occurs and return 0 to suppress the generic message. This patch is a preparation for making i2c remove callbacks return void. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16leds: lm3601x: Don't use mutex after it was destroyedUwe Kleine-König1-2/+0
The mutex might still be in use until the devm cleanup callback devm_led_classdev_flash_release() is called. This only happens some time after lm3601x_remove() completed. Fixes: e63a744871a3 ("leds: lm3601x: Convert class registration to device managed") Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16leds: lm3697: Remove duplicated error reporting in .remove()Uwe Kleine-König1-3/+1
Returning an error value from an i2c remove callback results in an error message being emitted by the i2c core, but otherwise it doesn't make a difference. The device goes away anyhow and the devm cleanups are called. As lm3697_remove() already emits an error message on failure and the additional error message by the i2c core doesn't add any useful information, don't pass the error value up the stack. Instead continue to clean up and return 0. This patch is a preparation for making i2c remove callbacks return void. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-08Merge tag 'leds-5.20-rc1' of ↵Linus Torvalds7-198/+675
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "A new driver for bcm63138, is31fl319x updates, fixups for multicolor. The clevo-mail driver got disabled, it needs an API fix" * tag 'leds-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (23 commits) leds: is31fl319x: use simple i2c probe function leds: is31fl319x: Fix devm vs. non-devm ordering leds: is31fl319x: Make use of dev_err_probe() leds: is31fl319x: Make use of device properties leds: is31fl319x: Cleanup formatting and dev_dbg calls leds: is31fl319x: Add support for is31fl319{0,1,3} chips leds: is31fl319x: Move chipset-specific values in chipdef struct leds: is31fl319x: Use non-wildcard names for vars, structs and defines leds: is31fl319x: Add missing si-en compatibles dt-bindings: leds: pwm-multicolor: document max-brigthness leds: turris-omnia: convert to use dev_groups leds: leds-bcm63138: get rid of LED_OFF leds: add help info about BCM63138 module name dt-bindings: leds: leds-bcm63138: unify full stops in descriptions dt-bindings: leds: lp50xx: fix LED children names dt-bindings: leds: class-multicolor: reference class directly in multi-led node leds: bcm63138: add support for BCM63138 controller dt-bindings: leds: add Broadcom's BCM63138 controller leds: clevo-mail: Mark as broken pending interface fix leds: pwm-multicolor: Support active-low LEDs ...
2022-08-02leds: is31fl319x: use simple i2c probe functionAndy Shevchenko1-3/+2
The i2c probe functions here don't use the id information provided in their second argument, so the single-parameter i2c probe function ("probe_new") can be used instead. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-08-02leds: is31fl319x: Fix devm vs. non-devm orderingAndy Shevchenko1-23/+9
When non-devm resources are allocated they mustn't be followed by devm allocations, otherwise it will break the tear down ordering and might lead to crashes or other bugs during ->remove() stage. Fix this by wrapping mutex_destroy() call with devm_add_action_or_reset(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-08-02leds: is31fl319x: Make use of dev_err_probe()Andy Shevchenko1-20/+13
Simplify the error handling in probe function by switching from dev_err() to dev_err_probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-08-02leds: is31fl319x: Make use of device propertiesAndy Shevchenko2-25/+21
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. Add mod_devicetable.h include. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-08-02leds: is31fl319x: Cleanup formatting and dev_dbg callsVincent Knecht1-13/+9
Fix remaining non-standard place for comments. Remove remaining dev_dbg after regmap_read in is31fl3196_brightness_set. Remove __func__ in dev_dbg calls, instead adding "channel" string to describe the first displayed value. Change remaining container_of() call to be on one line, as well as a few others. Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-08-02leds: is31fl319x: Add support for is31fl319{0,1,3} chipsVincent Knecht1-14/+147
Set specific chipset structs values for is31fl319{0,1,3} so that those chips can actually work. Datasheets: https://lumissil.com/assets/pdf/core/IS31FL3190_DS.pdf https://lumissil.com/assets/pdf/core/IS31FL3191_DS.pdf https://lumissil.com/assets/pdf/core/IS31FL3193_DS.pdf https://lumissil.com/assets/pdf/core/IS31FL3196_DS.pdf https://lumissil.com/assets/pdf/core/IS31FL3199_DS.pdf Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-08-02leds: is31fl319x: Move chipset-specific values in chipdef structVincent Knecht1-83/+125
Allow setting chips' specifics in chipdef struct by adding fields for: - the reset register address - a pointer to a regmap_config struct - a pointer to a brightness_set function - current default, min and max values - a boolean to distinguish 319{0,1,3} and 319{6,9} chips and use those fields in places where distinction has to be made. The fields for 319{0,1,3} still point to 319{6,9} values. No functional change. Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-08-02leds: is31fl319x: Use non-wildcard names for vars, structs and definesVincent Knecht1-71/+71
In order to add real support for is31fl3190, is31fl3191 and is31fl3193, rename variant-dependent elements to not use 319X where needed. 3190 suffix is used for is31fl3190, is31fl3191 and is31fl3193 circuits. 3196 suffix is used for is31fl3196 and is31fl3199. Those two groups have different register maps, current settings and even a different interpretation of the software shutdown bit: https://lumissil.com/assets/pdf/core/IS31FL3190_DS.pdf https://lumissil.com/assets/pdf/core/IS31FL3191_DS.pdf https://lumissil.com/assets/pdf/core/IS31FL3193_DS.pdf https://lumissil.com/assets/pdf/core/IS31FL3196_DS.pdf https://lumissil.com/assets/pdf/core/IS31FL3199_DS.pdf Rename variables, structures and defines in preparation of the splitting. No functional nor behaviour change. Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-08-02leds: is31fl319x: Add missing si-en compatiblesVincent Knecht1-0/+8
Add si-en compatibles for all chip variants. Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-07-30leds: turris-omnia: convert to use dev_groupsGreg Kroah-Hartman1-3/+1
The driver core supports the ability to handle the creation and removal of device-specific sysfs files in a race-free manner. Take advantage of that by converting this driver to use this by moving the sysfs attributes into a group and assigning the dev_groups pointer to it. Cc: Pavel Machek <pavel@ucw.cz> Cc: linux-leds@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-07-17leds: leds-bcm63138: get rid of LED_OFFRafał Miłecki1-2/+1
The whole "enum led_brightness" is marked as obsolete. Replace it with a (non-)zero check. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-07-17leds: add help info about BCM63138 module nameRafał Miłecki1-0/+2
It's what we do for all other LEDs drivers. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-07-17leds: bcm63138: add support for BCM63138 controllerRafał Miłecki3-0/+321
It's a new controller first introduced in BCM63138 SoC. Later it was also used in BCM4908, some BCM68xx and some BCM63xxx SoCs. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-07-17leds: clevo-mail: Mark as broken pending interface fixPavel Machek1-3/+3
Setting blink rate using brightness is unusual and should be fixed. Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-07-17leds: pwm-multicolor: Support active-low LEDsEmil Renner Berthing1-0/+5
Add support for LEDs wired up to light when the PWM output is low, just like the regular PWM LEDs. Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-07-17leds: pwm-multicolor: Don't show -EPROBE_DEFER as errorsEmil Renner Berthing1-2/+1
When requesting a PWM it might return -EPROBE_DEFER if it hasn't probed yet. This is not an error, so just propagate the -EPROBE_DEFER without logging anything. There is already dev_err_probe for exactly this situation. Fixes: 9fa2762110dd ("leds: Add PWM multicolor driver") Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-07-17leds: clevo-mail: fix Kconfig "its" grammarRandy Dunlap1-1/+1
Use the possessive "its" instead of the contraction "it's" where appropriate. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Lee Jones <lee.jones@linaro.org> Cc: linux-leds@vger.kernel.org Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-07-14leds: simatic-ipc-leds-gpio: Add GPIO version of Siemens driverHenning Schild4-80/+113
On Apollo Lake the pinctrl drivers will now come up without ACPI. Use that instead of open coding it. Create a new driver for that which can later be filled with more GPIO based models, and which has different dependencies. Signed-off-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org>
2022-07-14leds: simatic-ipc-leds: Convert to use P2SB accessorHenning Schild2-7/+8
Since we have a common P2SB accessor in tree we may use it instead of open coded variants. Replace custom code by p2sb_bar() call. Signed-off-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org>
2022-06-03Merge tag 'arm-multiplatform-5.19-2' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM multiplatform updates from Arnd Bergmann: "The second part of the multiplatform changes now converts the Intel/Marvell PXA platform along with the rest. The patches went through several rebases before the merge window as bugs were found, so they remained separate. This has to touch a lot of drivers, in particular the touchscreen, pcmcia, sound and clk bits, to detach the driver files from the platform and board specific header files" * tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: pxa/mmp: remove traces of plat-pxa ARM: pxa: convert to multiplatform ARM: pxa/sa1100: move I/O space to PCI_IOBASE ARM: pxa: remove support for MTD_XIP ARM: pxa: move mach/*.h to mach-pxa/ ARM: PXA: fix multi-cpu build of xsc3 ARM: pxa: move plat-pxa to drivers/soc/ ARM: mmp: rename pxa_register_device ARM: mmp: remove tavorevb board support ARM: pxa: remove unused mach/bitfield.h ARM: pxa: move clk register definitions to driver ARM: pxa: move smemc register access from clk to platform cpufreq: pxa3: move clk register access to clk driver ARM: pxa: remove get_clk_frequency_khz() ARM: pxa: pcmcia: move smemc configuration back to arch ASoC: pxa: i2s: use normal MMIO accessors ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: use pdev resource for FIFO regs Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops Input: wm97xx - switch to using threaded IRQ ...
2022-05-24leds: qcom-lpg: Require pattern to follow documentationBjorn Andersson1-5/+38
The leds-trigger-pattern documentation describes how the brightness of the LED should transition linearly from one brightness value to the next, over the given delta_t. But the pattern engine in the Qualcomm LPG hardware only supports holding the brightness for each entry for the period. This subset of patterns can be represented in the leds-trigger-pattern by injecting zero-time transitions after each entry in the pattern, resulting in a pattern that pattern that can be rendered by the LPG. Rework LPG pattern interface to require these zero-time transitions, to make it comply with this subset of patterns and reject the patterns it can't render. Fixes: 24e2d05d1b68 ("leds: Add driver for Qualcomm LPG") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-05-08leds: lp50xx: Remove duplicated error reporting in .remove()Uwe Kleine-König1-3/+1
Returning an error value from an i2c remove callback results in an error message being emitted by the i2c core, but otherwise it doesn't make a difference. The device goes away anyhow and the devm cleanups are called. As stk3310_set_state() already emits an error message on failure and the additional error message by the i2c core doesn't add any useful information, don't pass the error value up the stack. Instead continue to clean up and return 0. This patch is a preparation for making i2c remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-05-08leds: qcom-lpg: add missing PWM dependencyJohan Hovold1-0/+1
The Qualcomm LPG driver fails to probe unless PWM support is enabled so add the missing Kconfig dependency. Fixes: 24e2d05d1b68 ("leds: Add driver for Qualcomm LPG") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-05-08leds: ktd2692: Make aux-gpios optionalMarkuss Broks1-3/+2
Make the AUX pin optional, since it isn't a core part of functionality, and the device is designed to be operational with only one CTRL pin. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-05-08leds: ktd2692: Avoid duplicate error messages on probe deferralMarkuss Broks1-8/+4
Use dev_err_probe instead of dev_err to avoid duplicate error messages if the GPIO allocation makes the probe defer. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-05-08leds: is31fl32xx: Improve error reporting in .remove()Uwe Kleine-König1-1/+7
Returning an error value in an i2c remove callback results in a generic error message being emitted by the i2c core, but otherwise it doesn't make a difference. The device goes away anyhow and the devm cleanups are called. So instead of triggering the generic i2c error message, emit a more helpful message if a problem occurs and return 0 to suppress the generic message. This patch is a preparation for making i2c remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-05-08leds: Move pwm-multicolor driver into rgb directorySven Schwermer5-13/+12
The drivers/leds/rgb subdirectory is relatively fresh, so we move this new PWM multi-color driver into it. Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-05-05leds: Add PWM multicolor driverSven Schwermer3-0/+198
By allowing to group multiple monochrome PWM LEDs into multicolor LEDs, all involved LEDs can be controlled in-sync. This enables using effects using triggers, etc. Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-05-05leds: regulator: Make probeable from device treeLinus Walleij1-19/+23
The regulator LED can easily be adapted to probe from the device tree. We switch led_classdev_register() to led_classdev_register_ext() passing some struct led_init_data init_data that we leave NULL save the fwnode if platform data isn't present so that it will be populated from the device tree. If we have platform data we set up the name from the platform data but using init_data instead. Cc: Antonio Ospite <ao2@ao2.it> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-05-05leds: regulator: Add dev helper variableLinus Walleij1-6/+7
Instead of repeating the hard to read &pdev->dev just create a local struct device *dev in probe(). Cc: Antonio Ospite <ao2@ao2.it> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-05-04leds: pca9532: Make pca9532_destroy_devices() return voidUwe Kleine-König1-7/+4
Up to now pca9532_destroy_devices() returns always zero because it's always called with data != NULL. Remove the never-taken error path and make it return void which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c remove callbacks is ignored anyway. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-05-04leds: Add pm8350c support to Qualcomm LPG driverSatya Priya1-0/+13
Add pm8350c compatible and lpg_data to the driver. Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-05-04leds: Add driver for Qualcomm LPGBjorn Andersson5-0/+1432
The Light Pulse Generator (LPG) is a PWM-block found in a wide range of PMICs from Qualcomm. These PMICs typically comes with 1-8 LPG instances, with their output being routed to various other components, such as current sinks or GPIOs. Each LPG instance can operate on fixed parameters or based on a shared lookup-table, altering the duty cycle over time. This provides the means for hardware assisted transitions of LED brightness. A typical use case for the fixed parameter mode is to drive a PWM backlight control signal, the driver therefor allows each LPG instance to be exposed to the kernel either through the LED framework or the PWM framework. A typical use case for the LED configuration is to drive RGB LEDs in smartphones etc, for which the driver supports multiple channels to be ganged up to a MULTICOLOR LED. In this configuration the pattern generators will be synchronized, to allow for multi-color patterns. The idea of modelling this as a LED driver ontop of a PWM driver was considered, but setting the properties related to patterns does not fit in the PWM API. Similarly the idea of just duplicating the lower bits in a PWM and LED driver separately was considered, but this would not allow the PWM channels and LEDs to be configured on a per-board basis. The driver implements the more complex LED interface, and provides a PWM interface on the side of that, in the same driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Tested-by: Marijn Suijten <marijn.suijten@somainline.org> [On the Sony Xperia Nile Discovery, SDM630] Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-04-19ARM: pxa: split up mach/hardware.hArnd Bergmann1-1/+0
The mach/hardware.h is included in lots of places, and it provides three different things on pxa: - the cpu_is_pxa* macros - an indirect inclusion of mach/addr-map.h - the __REG() and io_pv2() helper macros Split it up into separate <linux/soc/pxa/cpu.h> and mach/pxa-regs.h headers, then change all the files that use mach/hardware.h to include the exact set of those three headers that they actually need, allowing for further more targeted cleanup. linux/soc/pxa/cpu.h can remain permanently exported and is now in a global location along with similar headers. pxa-regs.h and addr-map.h are only used in a very small number of drivers now and can be moved to arch/arm/mach-pxa/ directly when those drivers are to pass the necessary data as resources. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-leds@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: linux-rtc@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-28Merge tag 'leds-5.18-rc1' of ↵Linus Torvalds4-51/+56
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "Nothing major here, there are two drivers that need review and did not make it into this round" * tag 'leds-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: pca955x: Allow zero LEDs to be specified leds: pca955x: Make the gpiochip always expose all pins leds: simatic-ipc-leds: Don't directly deref ioremap_resource() returned ptr leds: simatic-ipc-leds: Make simatic_ipc_led_mem_res static leds: lm3692x: Return 0 from remove callback leds: sgm3140: Add ocs,ocp8110 compatible dt-bindings: vendor-prefixes: Add ocs prefix dt-bindings: leds: common: fix unit address in max77693 example
2022-03-02leds: pca955x: Allow zero LEDs to be specifiedAndrew Jeffery1-1/+1
It's valid to use the PCA955x devices just for GPIOs and not for LEDs. In this case, as PCA955X_TYPE_GPIO is now equivalent to PCA955X_TYPE_NONE, remove the test for whether we have any child nodes specified in the devicetree. A consequence of this is it's now possible to bind the driver to a PCA955x device when dynamically instantiated through the I2C subsystem's `new_device` interface. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-03-02leds: pca955x: Make the gpiochip always expose all pinsAndrew Jeffery1-31/+34
The devicetree binding allows specifying which pins are GPIO vs LED. Limiting the instantiated gpiochip to just these pins as the driver currently does requires an arbitrary mapping between pins and GPIOs, but such a mapping is not implemented by the driver. As a result, specifying GPIOs in such a way that they don't map 1-to-1 to pin indexes does not function as expected. Establishing such a mapping is more complex than not and even if we did, doing so leads to a slightly hairy userspace experience as the behaviour of the PCA955x gpiochip would depend on how the pins are assigned in the devicetree. Instead, always expose all pins via the gpiochip to provide a stable interface and track which pins are in use. Specifying a pin as `type = <PCA955X_TYPE_GPIO>;` in the devicetree becomes a no-op. I've assessed the impact of this change by looking through all of the affected devicetrees as of the tag leds-5.15-rc1: ``` $ git grep -l 'pca955[0123]' $(find . -name dts -type d) arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts arch/arm/boot/dts/aspeed-bmc-opp-swift.dts arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts ``` These are all IBM-associated platforms. I've analysed both the devicetrees and schematics where necessary to determine whether any systems hit the hazard of the current broken behaviour. For the most part, the systems specify the pins as either all LEDs or all GPIOs, or at least do so in a way such that the broken behaviour isn't exposed. The main counter-point to this observation is the Everest system whose devicetree describes a large number of PCA955x devices and in some cases has pin assignments that hit the hazard. However, there does not seem to be any use of the affected GPIOs in the userspace associated with Everest. Regardless, any use of the hazardous GPIOs in Everest is already broken, so let's fix the interface and then fix any already broken userspace with it. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-02-17leds: simatic-ipc-leds: Don't directly deref ioremap_resource() returned ptrHans de Goede1-14/+18
Sparse (rightly) currently gives the following warning: drivers/leds/simple/simatic-ipc-leds.c:155:40: sparse: sparse: incorrect type in assignment (different address spaces) expected void *static [toplevel] simatic_ipc_led_memory got void [noderef] __iomem * Fix this by changing the type of simatic_ipc_led_memory to void __iomem * and use readl()/writel() to access it. Cc: Henning Schild <henning.schild@siemens.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Gerd Haeussler <gerd.haeussler.ext@siemens.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-26 21:42:28 +0300