summaryrefslogtreecommitdiff
path: root/drivers/irqchip/irq-renesas-intc-irqpin.c
AgeCommit message (Collapse)AuthorFilesLines
2017-10-19irqchip/renesas-intc-irqpin: Use of_device_get_match_data() helperGeert Uytterhoeven1-6/+3
Use the of_device_get_match_data() helper instead of open coding. Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-11-24irqchip/renesas-intc-irqpin: Improve clock error handling and reportingGeert Uytterhoeven1-12/+33
If the Renesas External IRQ Pin driver cannot find a functional clock, it prints a warning, .e.g. renesas_intc_irqpin fe78001c.interrupt-controller: unable to get clock and continues, as the clock is optional, depending on the SoC type. This warning may confuse users. To fix this, add a flag to indicate that the clock is mandatory or optional, and add a few more compatible entries: - If the clock is mandatory (on R-Mobile A1 or SH-Mobile AG5), a missing clock is now treated as a fatal error, - If the clock is optional (on R-Car Gen1, or using the generic "renesas,intc-irqpin" compatible value), the warning is no longer printed. This requires making struct intc_irqpin_irlm_config more generic by renaming it to intc_irqpin_config, and adding a flag to indicate if IRLM is needed. The new clock flag is merged with the existing shared_irqs boolean into a bitfield to save space. Suggested-by: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lkml.kernel.org/r/1448377693-19597-1-git-send-email-geert+renesas@glider.be Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-11-24irqchip/renesas-intc-irqpin: Remove intc_irqpin_priv.number_of_irqsGeert Uytterhoeven1-11/+10
intc_irqpin_priv.number_of_irqs is used inside intc_irqpin_probe() only, so it can just become a local variable. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1448376581-9202-3-git-send-email-geert+renesas@glider.be Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-11-24irqchip/renesas-intc-irqpin: Remove obsolete platform data supportGeert Uytterhoeven1-26/+12
Since commit 4baadb9e05c68962 ("ARM: shmobile: r8a7778: remove obsolete setup code"), all Renesas SoCs with a renesas-intc-irqpin module are only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to use platform data anymore, hence remove platform data configuration. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1448376581-9202-2-git-send-email-geert+renesas@glider.be Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-09-30irqchip/renesas-intc-irqpin: r8a7778 IRLM setup supportUlrich Hecht1-2/+4
Works the same as on r8a7779. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1443607387-19147-1-git-send-email-geert+Brenesas@glider.be Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-16irqchip: Kill off set_irq_flags usageRob Herring1-1/+0
set_irq_flags is ARM specific with custom flags which have genirq equivalents. Convert drivers to use the genirq interfaces directly, so we can kill off set_irq_flags. The translation of flags is as follows: IRQF_VALID -> !IRQ_NOREQUEST IRQF_PROBE -> !IRQ_NOPROBE IRQF_NOAUTOEN -> IRQ_NOAUTOEN For IRQs managed by an irqdomain, the irqdomain core code handles clearing and setting IRQ_NOREQUEST already, so there is no need to do this in .map() functions and we can simply remove the set_irq_flags calls. Some users also modify IRQ_NOPROBE and this has been maintained although it is not clear that is really needed. There appears to be a great deal of blind copy and paste of this code. Signed-off-by: Rob Herring <robh@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Link: http://lkml.kernel.org/r/1440889285-5637-3-git-send-email-robh@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-15irqchip/renesas-intc-irqpin: Propagate wake-up settings to parentGeert Uytterhoeven1-0/+3
The renesas-intc-irqpin interrupt controller is cascaded to the GIC, but its driver doesn't propagate wake-up settings to the parent interrupt controller. Since commit aec89ef72ba6c944 ("irqchip/gic: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND"), the GIC driver masks interrupts during suspend, and wake-up through gpio-keys now fails on r8a7740/armadillo and sh73a0/kzm9g. Fix this by propagating wake-up settings to the parent interrupt controller. There's no need to handle irq_set_irq_wake() failures, as the renesas-intc-irqpin interrupt controller is always cascaded to a GIC, and the GIC driver always sets SKIP_SET_WAKE since the aforementioned commit. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1441731636-17610-2-git-send-email-geert%2Brenesas@glider.be Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-15irqchip/renesas-intc-irqpin: Use a separate lockdep classGeert Uytterhoeven1-0/+7
The renesas-intc-irqpin interrupt controller is cascaded to the GIC. Hence when propagating wake-up settings to its parent interrupt controller, the following lockdep warning is printed: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-armadillo-10725-g50fcd7643c034198 #781 Not tainted --------------------------------------------- s2ram/1179 is trying to acquire lock: (&irq_desc_lock_class){-.-...}, at: [<c005bb54>] __irq_get_desc_lock+0x78/0x94 but task is already holding lock: (&irq_desc_lock_class){-.-...}, at: [<c005bb54>] __irq_get_desc_lock+0x78/0x94 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by s2ram/1179: #0: (sb_writers#7){.+.+.+}, at: [<c00c9708>] __sb_start_write+0x64/0xb8 #1: (&of->mutex){+.+.+.}, at: [<c0125a00>] kernfs_fop_write+0x78/0x1a0 #2: (s_active#23){.+.+.+}, at: [<c0125a08>] kernfs_fop_write+0x80/0x1a0 #3: (autosleep_lock){+.+.+.}, at: [<c0058244>] pm_autosleep_lock+0x18/0x20 #4: (pm_mutex){+.+.+.}, at: [<c0057e50>] pm_suspend+0x54/0x248 #5: (&dev->mutex){......}, at: [<c0243a20>] __device_suspend+0xdc/0x240 #6: (&irq_desc_lock_class){-.-...}, at: [<c005bb54>] __irq_get_desc_lock+0x78/0x94 stack backtrace: CPU: 0 PID: 1179 Comm: s2ram Not tainted 4.2.0-armadillo-10725-g50fcd7643c034198 Hardware name: Generic R8A7740 (Flattened Device Tree) [<c00129f4>] (dump_backtrace) from [<c0012bec>] (show_stack+0x18/0x1c) [<c0012bd4>] (show_stack) from [<c03f5d94>] (dump_stack+0x20/0x28) [<c03f5d74>] (dump_stack) from [<c00514d4>] (__lock_acquire+0x67c/0x1b88) [<c0050e58>] (__lock_acquire) from [<c0052df8>] (lock_acquire+0x9c/0xbc) [<c0052d5c>] (lock_acquire) from [<c03fb068>] (_raw_spin_lock_irqsave+0x44/0x58) [<c03fb024>] (_raw_spin_lock_irqsave) from [<c005bb54>] (__irq_get_desc_lock+0x78/0x94 [<c005badc>] (__irq_get_desc_lock) from [<c005c3d8>] (irq_set_irq_wake+0x28/0x100) [<c005c3b0>] (irq_set_irq_wake) from [<c01e50d0>] (intc_irqpin_irq_set_wake+0x24/0x4c) [<c01e50ac>] (intc_irqpin_irq_set_wake) from [<c005c17c>] (set_irq_wake_real+0x3c/0x50 [<c005c140>] (set_irq_wake_real) from [<c005c414>] (irq_set_irq_wake+0x64/0x100) [<c005c3b0>] (irq_set_irq_wake) from [<c02a19b4>] (gpio_keys_suspend+0x60/0xa0) [<c02a1954>] (gpio_keys_suspend) from [<c023b750>] (platform_pm_suspend+0x3c/0x5c) Avoid this false positive by using a separate lockdep class for INTC External IRQ Pin interrupts. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1441798974-25716-3-git-send-email-geert%2Brenesas@glider.be Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-05irqchip: Constify irq_domain_opsKrzysztof Kozlowski1-1/+1
The irq_domain_ops are not modified by the driver and the irqdomain core code accepts pointer to a const data. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kukjin Kim <kgene@kernel.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Link: http://lkml.kernel.org/r/1430139264-4362-2-git-send-email-k.kozlowski.k@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-26irqchip: renesas-intc-irqpin: r8a7779 IRLM setup supportMagnus Damm1-9/+41
Add r8a7779 specific support for IRLM bit configuration in the INTC-IRQPIN driver. Without this code we need special workaround code in arch/arm/mach-shmobile. The IRLM bit for the INTC hardware exists on various older SH-based SoCs and is used to select between two modes for the external interrupt pins IRQ0 to IRQ3: IRLM = 0: (default from reset on r8a7779) In this mode the pins IRQ0 to IRQ3 are used together to give a value between 0 and 15 to the SoC. External logic is required for masking. This mode is not supported by the INTC-IRQPIN driver. IRLM = 1: (needs this patch or configuration elsewhere) In this mode IRQ0 to IRQ3 operate as 4 individual external interrupt pins. In this mode the SMSC ethernet chip can be used via IRQ1 on r8a7779 Marzen. This mode is the only supported mode by the INTC-IRQPIN driver. For this patch to work the r8a7779 DTS needs to pass the ICR0 register as the last register bank. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: horms@verge.net.au Cc: jason@lakedaemon.net Link: http://lkml.kernel.org/r/20141203121803.5936.35881.sendpatchset@w520 Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-10-20irqchip: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-14irqchip: renesas-intc-irqpin: Add minimal runtime PM supportGeert Uytterhoeven1-4/+34
This is just enough to let pm_clk_*() enable the functional clock, and manage it for suspend/resume, if present. Before, it was assumed enabled by the bootloader or reset state. To prevent the clock from being disabled while the module is needed for wake-up, implement irq_chip.irq_set_wake(), which increments/decrements the clock's enable_count when needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lkml.kernel.org/r/1410527720-18061-3-git-send-email-geert+renesas@glider.be Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-09-14irqchip: renesas-intc-irqpin: Add helper variable dev = &pdev->devGeert Uytterhoeven1-23/+22
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lkml.kernel.org/r/1410527720-18061-2-git-send-email-geert+renesas@glider.be Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-08-21irqchip: renesas-intc-irqpin: Add suspend-to-RAM wake up supportGeert Uytterhoeven1-3/+1
Set the ->irq_enable() and ->irq_disable() methods to NULL to enable lazy disable of interrupts, and set IRQCHIP_MASK_ON_SUSPEND to tell the core that only IRQs marked as wake-ups need to stay enabled during suspend-to-RAM. This makes wake-up by gpio-keys from suspend-to-RAM work on r8a7740/Armadillo. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lkml.kernel.org/r/1408546172-22484-1-git-send-email-geert+renesas@glider.be Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-11-24irqchip: renesas-intc-irqpin: Fix register bitfield shift calculationLaurent Pinchart1-3/+5
The SENSE register bitfield position is incorrectly computed for SoCs that use 2-bit IRQ sense fields. Fix it. This has been tested on the Marzen (H1) and Bockw (M1) boards. This bug has been present since the renesas-intc-irqpin driver was introduced by 443580486e3b9657 ("irqchip: Renesas INTC External IRQ pin driver") in v3.10-rc1. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-19ARM: shmobile: irqpin: add a DT property to enable masking on parentGuennadi Liakhovetski1-2/+5
To disable spurious interrupts, that get triggered on certain hardware, the irqpin driver masks them on the parent interrupt controller. To specify such broken devices a .control_parent parameter can be provided in the platform data. In the DT case we need a property, to do the same. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-18irqchip: renesas-intc-irqpin: DT binding for sense bitfield widthGuennadi Liakhovetski1-0/+4
Most Renesas irqpin controllers have 4-bit sense fields, however, some have different widths. This patch adds a DT binding to optionally specify such non-standard values. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-28irqchip: intc-irqpin: Add support for shared interrupt linesBastian Hecht1-7/+83
On some hardware we don't have a 1-1 mapping from the external interrupts coming from INTC to the GIC SPI pins. We can however share lines to demux incoming IRQs on these SoCs. This patch enables the intc_irqpin driver to detect requests for shared interrupt lines and demuxes them properly by querying the INTC INTREQx0A registers. If you need multiple shared intc_irqpin device instances, be sure to mask out all interrupts on the INTC that share the one line before you start to register them. Else you run into IRQ floods that would be caused by interrupts for which no handler has been set up yet when the first intc_irqpin device is registered. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18irqchip: intc-irqpin: Initial DT supportMagnus Damm1-0/+9
Add initial DT support to the INTC External IRQ Pin driver. At this point only hardware with 4-bit wide sense registers is supported via DT. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18irqchip: intc-irqpin: Make use of devm functionsMagnus Damm1-28/+13
Use devm_kzalloc(), devm_ioremap_nocache() and devm_request_irq() to simplify error handling. Signed-off-by: Magnus Damm <damm@opensource.se> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18irqchip: intc-irqpin: Add force commentsMagnus Damm1-0/+9
Add comments to describe the special case for "force" versions of enable and disable functions. Signed-off-by: Magnus Damm <damm@opensource.se> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18irqchip: intc-irqpin: Cache mapped IRQMagnus Damm1-14/+16
Cache IRQ in domain_irq variable instead of making use of irq_find_mapping(). While at it rename the irq variable to requested_irq. Signed-off-by: Magnus Damm <damm@opensource.se> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18irqchip: intc-irqpin: Whitespace fixesMagnus Damm1-3/+5
Remove whitespace damage and add newline between variables and code. Signed-off-by: Magnus Damm <damm@opensource.se> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18irqchip: Renesas INTC External IRQ pin driverMagnus Damm1-0/+464
This patch adds a driver for external IRQ pins connected to the INTC block on recent SoCs from Renesas. The INTC hardware block usually contains a rather wide range of features ranging from external IRQ pin handling to legacy interrupt controller support. On older SoCs the INTC is used as a general purpose interrupt controller both for external IRQ pins and on-chip devices. On more recent ARM based SoCs with Cortex-A9 the main interrupt controller is the GIC, but IRQ trigger setup still need to happen in the INTC hardware block. This driver implements the glue code needed to configure IRQ trigger and also handle mask/unmask and demux of external IRQ pins hooked up from the INTC to the GIC. Tested on sh73a0 and r8a7779. The hardware varies quite a bit with SoC model, for instance register width and bitfield widths vary wildly. The driver requires one GIC SPI per external IRQ pin to operate. Each driver instance will handle up to 8 external IRQ pins. The SoCs using this driver are currently mainly used together with regular platform devices so this driver allows configuration via platform data to support things like static interrupt base address. DT support will be added incrementally in the not so distant future. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-16 20:52:34 +0300