summaryrefslogtreecommitdiff
path: root/drivers/iommu/intel-iommu.c
AgeCommit message (Collapse)AuthorFilesLines
2019-11-12Merge branches 'iommu/fixes', 'arm/qcom', 'arm/renesas', 'arm/rockchip', ↵Joerg Roedel1-15/+46
'arm/mediatek', 'arm/tegra', 'arm/smmu', 'x86/amd', 'x86/vt-d', 'virtio' and 'core' into next
2019-11-11iommu/vt-d: Turn off translations at shutdownDeepa Dinamani1-0/+20
The intel-iommu driver assumes that the iommu state is cleaned up at the start of the new kernel. But, when we try to kexec boot something other than the Linux kernel, the cleanup cannot be relied upon. Hence, cleanup before we go down for reboot. Keeping the cleanup at initialization also, in case BIOS leaves the IOMMU enabled. I considered turning off iommu only during kexec reboot, but a clean shutdown seems always a good idea. But if someone wants to make it conditional, such as VMM live update, we can do that. There doesn't seem to be such a condition at this time. Tested that before, the info message 'DMAR: Translation was enabled for <iommu> but we are not in kdump mode' would be reported for each iommu. The message will not appear when the DMA-remapping is not enabled on entry to the kernel. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reservedYian Chen1-1/+7
VT-d RMRR (Reserved Memory Region Reporting) regions are reserved for device use only and should not be part of allocable memory pool of OS. BIOS e820_table reports complete memory map to OS, including OS usable memory ranges and BIOS reserved memory ranges etc. x86 BIOS may not be trusted to include RMRR regions as reserved type of memory in its e820 memory map, hence validate every RMRR entry with the e820 memory map to make sure the RMRR regions will not be used by OS for any other purposes. ia64 EFI is working fine so implement RMRR validation as a dummy function Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Yian Chen <yian.chen@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-10-30iommu/vt-d: Fix panic after kexec -p for kdumpJohn Donnelly1-1/+1
This cures a panic on restart after a kexec operation on 5.3 and 5.4 kernels. The underlying state of the iommu registers (iommu->flags & VTD_FLAG_TRANS_PRE_ENABLED) on a restart results in a domain being marked as "DEFER_DEVICE_DOMAIN_INFO" that produces an Oops in identity_mapping(). [ 43.654737] BUG: kernel NULL pointer dereference, address: 0000000000000056 [ 43.655720] #PF: supervisor read access in kernel mode [ 43.655720] #PF: error_code(0x0000) - not-present page [ 43.655720] PGD 0 P4D 0 [ 43.655720] Oops: 0000 [#1] SMP PTI [ 43.655720] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.3.2-1940.el8uek.x86_64 #1 [ 43.655720] Hardware name: Oracle Corporation ORACLE SERVER X5-2/ASM,MOTHERBOARD,1U, BIOS 30140300 09/20/2018 [ 43.655720] RIP: 0010:iommu_need_mapping+0x29/0xd0 [ 43.655720] Code: 00 0f 1f 44 00 00 48 8b 97 70 02 00 00 48 83 fa ff 74 53 48 8d 4a ff b8 01 00 00 00 48 83 f9 fd 76 01 c3 48 8b 35 7f 58 e0 01 <48> 39 72 58 75 f2 55 48 89 e5 41 54 53 48 8b 87 28 02 00 00 4c 8b [ 43.655720] RSP: 0018:ffffc9000001b9b0 EFLAGS: 00010246 [ 43.655720] RAX: 0000000000000001 RBX: 0000000000001000 RCX: fffffffffffffffd [ 43.655720] RDX: fffffffffffffffe RSI: ffff8880719b8000 RDI: ffff8880477460b0 [ 43.655720] RBP: ffffc9000001b9e8 R08: 0000000000000000 R09: ffff888047c01700 [ 43.655720] R10: 00002194036fc692 R11: 0000000000000000 R12: 0000000000000000 [ 43.655720] R13: ffff8880477460b0 R14: 0000000000000cc0 R15: ffff888072d2b558 [ 43.655720] FS: 0000000000000000(0000) GS:ffff888071c00000(0000) knlGS:0000000000000000 [ 43.655720] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 43.655720] CR2: 0000000000000056 CR3: 000000007440a002 CR4: 00000000001606b0 [ 43.655720] Call Trace: [ 43.655720] ? intel_alloc_coherent+0x2a/0x180 [ 43.655720] ? __schedule+0x2c2/0x650 [ 43.655720] dma_alloc_attrs+0x8c/0xd0 [ 43.655720] dma_pool_alloc+0xdf/0x200 [ 43.655720] ehci_qh_alloc+0x58/0x130 [ 43.655720] ehci_setup+0x287/0x7ba [ 43.655720] ? _dev_info+0x6c/0x83 [ 43.655720] ehci_pci_setup+0x91/0x436 [ 43.655720] usb_add_hcd.cold.48+0x1d4/0x754 [ 43.655720] usb_hcd_pci_probe+0x2bc/0x3f0 [ 43.655720] ehci_pci_probe+0x39/0x40 [ 43.655720] local_pci_probe+0x47/0x80 [ 43.655720] pci_device_probe+0xff/0x1b0 [ 43.655720] really_probe+0xf5/0x3a0 [ 43.655720] driver_probe_device+0xbb/0x100 [ 43.655720] device_driver_attach+0x58/0x60 [ 43.655720] __driver_attach+0x8f/0x150 [ 43.655720] ? device_driver_attach+0x60/0x60 [ 43.655720] bus_for_each_dev+0x74/0xb0 [ 43.655720] driver_attach+0x1e/0x20 [ 43.655720] bus_add_driver+0x151/0x1f0 [ 43.655720] ? ehci_hcd_init+0xb2/0xb2 [ 43.655720] ? do_early_param+0x95/0x95 [ 43.655720] driver_register+0x70/0xc0 [ 43.655720] ? ehci_hcd_init+0xb2/0xb2 [ 43.655720] __pci_register_driver+0x57/0x60 [ 43.655720] ehci_pci_init+0x6a/0x6c [ 43.655720] do_one_initcall+0x4a/0x1fa [ 43.655720] ? do_early_param+0x95/0x95 [ 43.655720] kernel_init_freeable+0x1bd/0x262 [ 43.655720] ? rest_init+0xb0/0xb0 [ 43.655720] kernel_init+0xe/0x110 [ 43.655720] ret_from_fork+0x24/0x50 Fixes: 8af46c784ecfe ("iommu/vt-d: Implement is_attach_deferred iommu ops entry") Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: John Donnelly <john.p.donnelly@oracle.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-10-18iommu/vt-d: Return the correct dma mask when we are bypassing the IOMMUArvind Sankar1-1/+9
We must return a mask covering the full physical RAM when bypassing the IOMMU mapping. Also, in iommu_need_mapping, we need to check using dma_direct_get_required_mask to ensure that the device's dma_mask can cover physical RAM before deciding to bypass IOMMU mapping. Based on an earlier patch from Christoph Hellwig. Fixes: 249baa547901 ("dma-mapping: provide a better default ->get_required_mask") Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-10-15iommu/vt-d: Refactor find_domain() helperLu Baolu1-13/+18
Current find_domain() helper checks and does the deferred domain attachment and return the domain in use. This isn't always the use case for the callers. Some callers only want to retrieve the current domain in use. This refactors find_domain() into two helpers: 1) find_domain() only returns the domain in use; 2) deferred_attach_domain() does the deferred domain attachment if required and return the domain in use. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-10-15iommu: Add gfp parameter to iommu_ops::mapTom Murphy1-1/+1
Add a gfp_t parameter to the iommu_ops::map function. Remove the needless locking in the AMD iommu driver. The iommu_ops::map function (or the iommu_map function which calls it) was always supposed to be sleepable (according to Joerg's comment in this thread: https://lore.kernel.org/patchwork/patch/977520/ ) and so should probably have had a "might_sleep()" since it was written. However currently the dma-iommu api can call iommu_map in an atomic context, which it shouldn't do. This doesn't cause any problems because any iommu driver which uses the dma-iommu api uses gfp_atomic in it's iommu_ops::map function. But doing this wastes the memory allocators atomic pools. Signed-off-by: Tom Murphy <murphyt7@tcd.ie> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-09-19Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-0/+2
Pull dma-mapping updates from Christoph Hellwig: - add dma-mapping and block layer helpers to take care of IOMMU merging for mmc plus subsequent fixups (Yoshihiro Shimoda) - rework handling of the pgprot bits for remapping (me) - take care of the dma direct infrastructure for swiotlb-xen (me) - improve the dma noncoherent remapping infrastructure (me) - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me) - cleanup mmaping of coherent DMA allocations (me) - various misc cleanups (Andy Shevchenko, me) * tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits) mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE mmc: queue: Fix bigger segments usage arm64: use asm-generic/dma-mapping.h swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page swiotlb-xen: simplify cache maintainance swiotlb-xen: use the same foreign page check everywhere swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable xen: remove the exports for xen_{create,destroy}_contiguous_region xen/arm: remove xen_dma_ops xen/arm: simplify dma_cache_maint xen/arm: use dev_is_dma_coherent xen/arm: consolidate page-coherent.h xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance arm: remove wrappers for the generic dma remap helpers dma-mapping: introduce a dma_common_find_pages helper dma-mapping: always use VM_DMA_COHERENT for generic DMA remap vmalloc: lift the arm flag for coherent mappings to common code dma-mapping: provide a better default ->get_required_mask dma-mapping: remove the dma_declare_coherent_memory export remoteproc: don't allow modular build ...
2019-09-11Merge branches 'arm/omap', 'arm/exynos', 'arm/smmu', 'arm/mediatek', ↵Joerg Roedel1-29/+330
'arm/qcom', 'arm/renesas', 'x86/amd', 'x86/vt-d' and 'core' into next
2019-09-11iommu/vt-d: Declare Broadwell igfx dmar support snafuChris Wilson1-9/+35
Despite the widespread and complete failure of Broadwell integrated graphics when DMAR is enabled, known over the years, we have never been able to root cause the issue. Instead, we let the failure undermine our confidence in the iommu system itself when we should be pushing for it to be always enabled. Quirk away Broadwell and remove the rotten apple. References: https://bugs.freedesktop.org/show_bug.cgi?id=89360 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Martin Peres <martin.peres@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-09-11iommu/vt-d: Use bounce buffer for untrusted devicesLu Baolu1-0/+258
The Intel VT-d hardware uses paging for DMA remapping. The minimum mapped window is a page size. The device drivers may map buffers not filling the whole IOMMU window. This allows the device to access to possibly unrelated memory and a malicious device could exploit this to perform DMA attacks. To address this, the Intel IOMMU driver will use bounce pages for those buffers which don't fill whole IOMMU pages. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Xu Pengfei <pengfei.xu@intel.com> Tested-by: Mika Westerberg <mika.westerberg@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-09-11iommu/vt-d: Add trace events for device dma map/unmapLu Baolu1-3/+10
This adds trace support for the Intel IOMMU driver. It also declares some events which could be used to trace the events when an IOVA is being mapped or unmapped in a domain. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-09-11iommu/vt-d: Don't switch off swiotlb if bounce page is usedLu Baolu1-15/+17
The bounce page implementation depends on swiotlb. Hence, don't switch off swiotlb if the system has untrusted devices or could potentially be hot-added with any untrusted devices. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-09-11iommu/vt-d: Check whether device requires bounce bufferLu Baolu1-0/+7
This adds a helper to check whether a device needs to use bounce buffer. It also provides a boot time option to disable the bounce buffer. Users can use this to prevent the iommu driver from using the bounce buffer for performance gain. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Xu Pengfei <pengfei.xu@intel.com> Tested-by: Mika Westerberg <mika.westerberg@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-09-04dma-mapping: explicitly wire up ->mmap and ->get_sgtableChristoph Hellwig1-0/+2
While the default ->mmap and ->get_sgtable implementations work for the majority of our dma_map_ops impementations they are inherently safe for others that don't use the page allocator or CMA and/or use their own way of remapping not covered by the common code. So remove the defaults if these methods are not wired up, but instead wire up the default implementations for all safe instances. Fixes: e1c7e324539a ("dma-mapping: always provide the dma_map_ops based implementation") Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-08-30Revert "iommu/vt-d: Avoid duplicated pci dma alias consideration"Lu Baolu1-2/+53
This reverts commit 557529494d79f3f1fadd486dd18d2de0b19be4da. Commit 557529494d79f ("iommu/vt-d: Avoid duplicated pci dma alias consideration") aimed to address a NULL pointer deference issue happened when a thunderbolt device driver returned unexpectedly. Unfortunately, this change breaks a previous pci quirk added by commit cc346a4714a59 ("PCI: Add function 1 DMA alias quirk for Marvell devices"), as the result, devices like Marvell 88SE9128 SATA controller doesn't work anymore. We will continue to try to find the real culprit mentioned in 557529494d79f, but for now we should revert it to fix current breakage. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204627 Cc: Stijn Tintel <stijn@linux-ipv6.be> Cc: Petr Vandrovec <petr@vandrovec.name> Reported-by: Stijn Tintel <stijn@linux-ipv6.be> Reported-by: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-23Merge branch 'for-joerg/arm-smmu/updates' of ↵Joerg Roedel1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
2019-08-23iommu/vt-d: Request passthrough mode from IOMMU coreJoerg Roedel1-1/+1
Get rid of the iommu_pass_through variable and request passthrough mode via the new iommu core function. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-20Merge branch 'for-joerg/batched-unmap' of ↵Joerg Roedel1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into core
2019-08-09iommu/vt-d: Fix possible use-after-free of private domainLu Baolu1-1/+2
Multiple devices might share a private domain. One real example is a pci bridge and all devices behind it. When remove a private domain, make sure that it has been detached from all devices to avoid use-after-free case. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Fixes: 942067f1b6b97 ("iommu/vt-d: Identify default domains replaced with private") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-09iommu/vt-d: Detach domain before using a private oneLu Baolu1-1/+5
When the default domain of a group doesn't work for a device, the iommu driver will try to use a private domain. The domain which was previously attached to the device must be detached. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Fixes: 942067f1b6b97 ("iommu/vt-d: Identify default domains replaced with private") Reported-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lkml.org/lkml/2019/8/2/1379 Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-06iommu/vt-d: Detach domain when move device out of groupLu Baolu1-0/+2
When removing a device from an iommu group, the domain should be detached from the device. Otherwise, the stale domain info will still be cached by the driver and the driver will refuse to attach any domain to the device again. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Fixes: b7297783c2bb6 ("iommu/vt-d: Remove duplicated code for device hotplug") Reported-and-tested-by: Vlad Buslov <vladbu@mellanox.com> Suggested-by: Robin Murphy <robin.murphy@arm.com> Link: https://lkml.org/lkml/2019/7/26/1133 Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-29iommu: Pass struct iommu_iotlb_gather to ->unmap() and ->iotlb_sync()Will Deacon1-1/+2
To allow IOMMU drivers to batch up TLB flushing operations and postpone them until ->iotlb_sync() is called, extend the prototypes for the ->unmap() and ->iotlb_sync() IOMMU ops callbacks to take a pointer to the current iommu_iotlb_gather structure. All affected IOMMU drivers are updated, but there should be no functional change since the extra parameter is ignored for now. Signed-off-by: Will Deacon <will@kernel.org>
2019-07-22iommu/vt-d: Check if domain->pgd was allocatedDmitry Safonov1-3/+5
There is a couple of places where on domain_init() failure domain_exit() is called. While currently domain_init() can fail only if alloc_pgtable_page() has failed. Make domain_exit() check if domain->pgd present, before calling domain_unmap(), as it theoretically should crash on clearing pte entries in dma_pte_clear_level(). Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: iommu@lists.linux-foundation.org Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-22iommu/vt-d: Don't queue_iova() if there is no flush queueDmitry Safonov1-1/+2
Intel VT-d driver was reworked to use common deferred flushing implementation. Previously there was one global per-cpu flush queue, afterwards - one per domain. Before deferring a flush, the queue should be allocated and initialized. Currently only domains with IOMMU_DOMAIN_DMA type initialize their flush queue. It's probably worth to init it for static or unmanaged domains too, but it may be arguable - I'm leaving it to iommu folks. Prevent queuing an iova flush if the domain doesn't have a queue. The defensive check seems to be worth to keep even if queue would be initialized for all kinds of domains. And is easy backportable. On 4.19.43 stable kernel it has a user-visible effect: previously for devices in si domain there were crashes, on sata devices: BUG: spinlock bad magic on CPU#6, swapper/0/1 lock: 0xffff88844f582008, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 6 PID: 1 Comm: swapper/0 Not tainted 4.19.43 #1 Call Trace: <IRQ> dump_stack+0x61/0x7e spin_bug+0x9d/0xa3 do_raw_spin_lock+0x22/0x8e _raw_spin_lock_irqsave+0x32/0x3a queue_iova+0x45/0x115 intel_unmap+0x107/0x113 intel_unmap_sg+0x6b/0x76 __ata_qc_complete+0x7f/0x103 ata_qc_complete+0x9b/0x26a ata_qc_complete_multiple+0xd0/0xe3 ahci_handle_port_interrupt+0x3ee/0x48a ahci_handle_port_intr+0x73/0xa9 ahci_single_level_irq_intr+0x40/0x60 __handle_irq_event_percpu+0x7f/0x19a handle_irq_event_percpu+0x32/0x72 handle_irq_event+0x38/0x56 handle_edge_irq+0x102/0x121 handle_irq+0x147/0x15c do_IRQ+0x66/0xf2 common_interrupt+0xf/0xf RIP: 0010:__do_softirq+0x8c/0x2df The same for usb devices that use ehci-pci: BUG: spinlock bad magic on CPU#0, swapper/0/1 lock: 0xffff88844f402008, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.43 #4 Call Trace: <IRQ> dump_stack+0x61/0x7e spin_bug+0x9d/0xa3 do_raw_spin_lock+0x22/0x8e _raw_spin_lock_irqsave+0x32/0x3a queue_iova+0x77/0x145 intel_unmap+0x107/0x113 intel_unmap_page+0xe/0x10 usb_hcd_unmap_urb_setup_for_dma+0x53/0x9d usb_hcd_unmap_urb_for_dma+0x17/0x100 unmap_urb_for_dma+0x22/0x24 __usb_hcd_giveback_urb+0x51/0xc3 usb_giveback_urb_bh+0x97/0xde tasklet_action_common.isra.4+0x5f/0xa1 tasklet_action+0x2d/0x30 __do_softirq+0x138/0x2df irq_exit+0x7d/0x8b smp_apic_timer_interrupt+0x10f/0x151 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:_raw_spin_unlock_irqrestore+0x17/0x39 Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: iommu@lists.linux-foundation.org Cc: <stable@vger.kernel.org> # 4.14+ Fixes: 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing") Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-22iommu/vt-d: Avoid duplicated pci dma alias considerationLu Baolu1-53/+2
As we have abandoned the home-made lazy domain allocation and delegated the DMA domain life cycle up to the default domain mechanism defined in the generic iommu layer, we needn't consider pci alias anymore when mapping/unmapping the context entries. Without this fix, we see kernel NULL pointer dereference during pci device hot-plug test. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Fixes: fa954e6831789 ("iommu/vt-d: Delegate the dma domain to upper layer") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reported-and-tested-by: Xu Pengfei <pengfei.xu@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-22Revert "iommu/vt-d: Consolidate domain_init() to avoid duplication"Joerg Roedel1-36/+87
This reverts commit 123b2ffc376e1b3e9e015c75175b61e88a8b8518. This commit reportedly caused boot failures on some systems and needs to be reverted for now. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-07-04Merge branches 'x86/vt-d', 'x86/amd', 'arm/smmu', 'arm/omap', ↵Joerg Roedel1-9/+1
'generic-dma-ops' and 'core' into next
2019-06-22Revert "iommu/vt-d: Fix lock inversion between iommu->lock and ↵Peter Xu1-4/+3
device_domain_lock" This reverts commit 7560cc3ca7d9d11555f80c830544e463fcdb28b8. With 5.2.0-rc5 I can easily trigger this with lockdep and iommu=pt: ====================================================== WARNING: possible circular locking dependency detected 5.2.0-rc5 #78 Not tainted ------------------------------------------------------ swapper/0/1 is trying to acquire lock: 00000000ea2b3beb (&(&iommu->lock)->rlock){+.+.}, at: domain_context_mapping_one+0xa5/0x4e0 but task is already holding lock: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (device_domain_lock){....}: _raw_spin_lock_irqsave+0x3c/0x50 dmar_insert_one_dev_info+0xbb/0x510 domain_add_dev_info+0x50/0x90 dev_prepare_static_identity_mapping+0x30/0x68 intel_iommu_init+0xddd/0x1422 pci_iommu_init+0x16/0x3f do_one_initcall+0x5d/0x2b4 kernel_init_freeable+0x218/0x2c1 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 -> #0 (&(&iommu->lock)->rlock){+.+.}: lock_acquire+0x9e/0x170 _raw_spin_lock+0x25/0x30 domain_context_mapping_one+0xa5/0x4e0 pci_for_each_dma_alias+0x30/0x140 dmar_insert_one_dev_info+0x3b2/0x510 domain_add_dev_info+0x50/0x90 dev_prepare_static_identity_mapping+0x30/0x68 intel_iommu_init+0xddd/0x1422 pci_iommu_init+0x16/0x3f do_one_initcall+0x5d/0x2b4 kernel_init_freeable+0x218/0x2c1 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(device_domain_lock); lock(&(&iommu->lock)->rlock); lock(device_domain_lock); lock(&(&iommu->lock)->rlock); *** DEADLOCK *** 2 locks held by swapper/0/1: #0: 00000000033eb13d (dmar_global_lock){++++}, at: intel_iommu_init+0x1e0/0x1422 #1: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0 stack backtrace: CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc5 #78 Hardware name: LENOVO 20KGS35G01/20KGS35G01, BIOS N23ET50W (1.25 ) 06/25/2018 Call Trace: dump_stack+0x85/0xc0 print_circular_bug.cold.57+0x15c/0x195 __lock_acquire+0x152a/0x1710 lock_acquire+0x9e/0x170 ? domain_context_mapping_one+0xa5/0x4e0 _raw_spin_lock+0x25/0x30 ? domain_context_mapping_one+0xa5/0x4e0 domain_context_mapping_one+0xa5/0x4e0 ? domain_context_mapping_one+0x4e0/0x4e0 pci_for_each_dma_alias+0x30/0x140 dmar_insert_one_dev_info+0x3b2/0x510 domain_add_dev_info+0x50/0x90 dev_prepare_static_identity_mapping+0x30/0x68 intel_iommu_init+0xddd/0x1422 ? printk+0x58/0x6f ? lockdep_hardirqs_on+0xf0/0x180 ? do_early_param+0x8e/0x8e ? e820__memblock_setup+0x63/0x63 pci_iommu_init+0x16/0x3f do_one_initcall+0x5d/0x2b4 ? do_early_param+0x8e/0x8e ? rcu_read_lock_sched_held+0x55/0x60 ? do_early_param+0x8e/0x8e kernel_init_freeable+0x218/0x2c1 ? rest_init+0x230/0x230 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 domain_context_mapping_one() is taking device_domain_lock first then iommu lock, while dmar_insert_one_dev_info() is doing the reverse. That should be introduced by commit: 7560cc3ca7d9 ("iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock", 2019-05-27) So far I still cannot figure out how the previous deadlock was triggered (I cannot find iommu lock taken before calling of iommu_flush_dev_iotlb()), however I'm pretty sure that that change should be incomplete at least because it does not fix all the places so we're still taking the locks in different orders, while reverting that commit is very clean to me so far that we should always take device_domain_lock first then the iommu lock. We can continue to try to find the real culprit mentioned in 7560cc3ca7d9, but for now I think we should revert it to fix current breakage. CC: Joerg Roedel <joro@8bytes.org> CC: Lu Baolu <baolu.lu@linux.intel.com> CC: dave.jiang@intel.com Signed-off-by: Peter Xu <peterx@redhat.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-18iommu/vt-d: Silence a variable set but not usedQian Cai1-1/+2
The commit "iommu/vt-d: Probe DMA-capable ACPI name space devices" introduced a compilation warning due to the "iommu" variable in for_each_active_iommu() but never used the for each element, i.e, "drhd->iommu". drivers/iommu/intel-iommu.c: In function 'probe_acpi_namespace_devices': drivers/iommu/intel-iommu.c:4639:22: warning: variable 'iommu' set but not used [-Wunused-but-set-variable] struct intel_iommu *iommu; Silence the warning the same way as in the commit d3ed71e5cc50 ("drivers/iommu/intel-iommu.c: fix variable 'iommu' set but not used") Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-18iommu/vt-d: Remove an unused variable "length"Qian Cai1-3/+0
The linux-next commit "iommu/vt-d: Duplicate iommu_resv_region objects per device list" [1] left out an unused variable, drivers/iommu/intel-iommu.c: In function 'dmar_parse_one_rmrr': drivers/iommu/intel-iommu.c:4014:9: warning: variable 'length' set but not used [-Wunused-but-set-variable] [1] https://lore.kernel.org/patchwork/patch/1083073/ Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-14Merge tag 'iommu-fixes-v5.2-rc4' of ↵Linus Torvalds1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - three fixes for Intel VT-d to fix a potential dead-lock, a formatting fix and a bit setting fix - one fix for the ARM-SMMU to make it work on some platforms with sub-optimal SMMU emulation * tag 'iommu-fixes-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/arm-smmu: Avoid constant zero in TLBI writes iommu/vt-d: Set the right field for Page Walk Snoop iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock iommu: Add missing new line for dma type
2019-06-12iommu/vt-d: Consolidate domain_init() to avoid duplicationLu Baolu1-87/+36
The domain_init() and md_domain_init() do almost the same job. Consolidate them to avoid duplication. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Cleanup after delegating DMA domain to generic iommuSai Praneeth Prakhya1-55/+0
[No functional changes] 1. Starting with commit df4f3c603aeb ("iommu/vt-d: Remove static identity map code") there are no callers for iommu_prepare_rmrr_dev() but the implementation of the function still exists, so remove it. Also, as a ripple effect remove get_domain_for_dev() and iommu_prepare_identity_map() because they aren't being used either. 2. Remove extra new line in couple of places. Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Fix suspicious RCU usage in probe_acpi_namespace_devices()Lu Baolu1-0/+2
The drhd and device scope list should be iterated with the iommu global lock held. Otherwise, a suspicious RCU usage message will be displayed. [ 3.695886] ============================= [ 3.695917] WARNING: suspicious RCU usage [ 3.695950] 5.2.0-rc2+ #2467 Not tainted [ 3.695981] ----------------------------- [ 3.696014] drivers/iommu/intel-iommu.c:4569 suspicious rcu_dereference_check() usage! [ 3.696069] other info that might help us debug this: [ 3.696126] rcu_scheduler_active = 2, debug_locks = 1 [ 3.696173] no locks held by swapper/0/1. [ 3.696204] stack backtrace: [ 3.696241] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc2+ #2467 [ 3.696370] Call Trace: [ 3.696404] dump_stack+0x85/0xcb [ 3.696441] intel_iommu_init+0x128c/0x13ce [ 3.696478] ? kmem_cache_free+0x16b/0x2c0 [ 3.696516] ? __fput+0x14b/0x270 [ 3.696550] ? __call_rcu+0xb7/0x300 [ 3.696583] ? get_max_files+0x10/0x10 [ 3.696631] ? set_debug_rodata+0x11/0x11 [ 3.696668] ? e820__memblock_setup+0x60/0x60 [ 3.696704] ? pci_iommu_init+0x16/0x3f [ 3.696737] ? set_debug_rodata+0x11/0x11 [ 3.696770] pci_iommu_init+0x16/0x3f [ 3.696805] do_one_initcall+0x5d/0x2e4 [ 3.696844] ? set_debug_rodata+0x11/0x11 [ 3.696880] ? rcu_read_lock_sched_held+0x6b/0x80 [ 3.696924] kernel_init_freeable+0x1f0/0x27c [ 3.696961] ? rest_init+0x260/0x260 [ 3.696997] kernel_init+0xa/0x110 [ 3.697028] ret_from_fork+0x3a/0x50 Fixes: fa212a97f3a36 ("iommu/vt-d: Probe DMA-capable ACPI name space devices") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Allow DMA domain attaching to rmrr locked deviceLu Baolu1-1/+2
We don't allow a device to be assigned to user level when it is locked by any RMRR's. Hence, intel_iommu_attach_device() will return error if a domain of type IOMMU_DOMAIN_UNMANAGED is about to attach to a device locked by rmrr. But this doesn't apply to a domain of type other than IOMMU_DOMAIN_UNMANAGED. This adds a check to fix this. Fixes: fa954e6831789 ("iommu/vt-d: Delegate the dma domain to upper layer") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reported-and-tested-by: Qian Cai <cai@lca.pw> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Don't enable iommu's which have been ignoredLu Baolu1-2/+7
The iommu driver will ignore some iommu units if there's no device under its scope or those devices have been explicitly set to bypass the DMA translation. Don't enable those iommu units, otherwise the devices under its scope won't work. Fixes: d8190dc638866 ("iommu/vt-d: Enable DMA remapping after rmrr mapped") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Set domain type for a private domainLu Baolu1-0/+2
Otherwise, domain_get_iommu() will be broken. Fixes: 942067f1b6b97 ("iommu/vt-d: Identify default domains replaced with private") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Don't return error when device gets right domainLu Baolu1-6/+0
If a device gets a right domain in add_device ops, it shouldn't return error. Fixes: 942067f1b6b97 ("iommu/vt-d: Identify default domains replaced with private") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Differentiate relaxable and non relaxable RMRRsEric Auger1-15/+39
Now we have a new IOMMU_RESV_DIRECT_RELAXABLE reserved memory region type, let's report USB and GFX RMRRs as relaxable ones. We introduce a new device_rmrr_is_relaxable() helper to check whether the rmrr belongs to the relaxable category. This allows to have a finer reporting at IOMMU API level of reserved memory regions. This will be exploitable by VFIO to define the usable IOVA range and detect potential conflicts between the guest physical address space and host reserved regions. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Handle PCI bridge RMRR device scopes in intel_iommu_get_resv_regionsEric Auger1-1/+2
In the case the RMRR device scope is a PCI-PCI bridge, let's check the device belongs to the PCI sub-hierarchy. Fixes: 0659b8dc45a6 ("iommu/vt-d: Implement reserved region get/put callbacks") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Handle RMRR with PCI bridge device scopesEric Auger1-1/+2
When reading the vtd specification and especially the Reserved Memory Region Reporting Structure chapter, it is not obvious a device scope element cannot be a PCI-PCI bridge, in which case all downstream ports are likely to access the reserved memory region. Let's handle this case in device_has_rmrr. Fixes: ea2447f700ca ("intel-iommu: Prevent devices with RMRRs from being placed into SI Domain") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Introduce is_downstream_to_pci_bridge helperEric Auger1-8/+29
Several call sites are about to check whether a device belongs to the PCI sub-hierarchy of a candidate PCI-PCI bridge. Introduce an helper to perform that check. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-12iommu/vt-d: Duplicate iommu_resv_region objects per device listEric Auger1-17/+17
intel_iommu_get_resv_regions() aims to return the list of reserved regions accessible by a given @device. However several devices can access the same reserved memory region and when building the list it is not safe to use a single iommu_resv_region object, whose container is the RMRR. This iommu_resv_region must be duplicated per device reserved region list. Let's remove the struct iommu_resv_region from the RMRR unit and allocate the iommu_resv_region directly in intel_iommu_get_resv_regions(). We hold the dmar_global_lock instead of the rcu-lock to allow sleeping. Fixes: 0659b8dc45a6 ("iommu/vt-d: Implement reserved region get/put callbacks") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-03iommu/vt-d: Fix a variable set but not usedQian Cai1-4/+0
The commit "iommu/vt-d: Delegate the dma domain to upper layer" left an unused variable, drivers/iommu/intel-iommu.c: In function 'disable_dmar_iommu': drivers/iommu/intel-iommu.c:1652:23: warning: variable 'domain' set but not used [-Wunused-but-set-variable] Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-02drivers/iommu/intel-iommu.c: fix variable 'iommu' set but not usedQian Cai1-1/+2
Commit cf04eee8bf0e ("iommu/vt-d: Include ACPI devices in iommu=pt") added for_each_active_iommu() in iommu_prepare_static_identity_mapping() but never used the each element, i.e, "drhd->iommu". drivers/iommu/intel-iommu.c: In function 'iommu_prepare_static_identity_mapping': drivers/iommu/intel-iommu.c:3037:22: warning: variable 'iommu' set but not used [-Wunused-but-set-variable] struct intel_iommu *iommu; Fixed the warning by appending a compiler attribute __maybe_unused for it. Link: http://lkml.kernel.org/r/20190523013314.2732-1-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joerg Roedel <jroedel@suse.de> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-28iommu/vt-d: Remove static identity map codeLu Baolu1-143/+1
The code to prepare the static identity map for various reserved memory ranges in intel_iommu_init() is duplicated with the default domain mechanism now. Remove it to avoid duplication. Signed-off-by: James Sewart <jamessewart@arista.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-28iommu/vt-d: Remove duplicated code for device hotplugLu Baolu1-34/+0
The iommu generic code has handled the device hotplug cases. Remove the duplicated code. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-28iommu/vt-d: Remove startup parameter from device_def_domain_type()Lu Baolu1-7/+7
It isn't used anywhere. Remove it to make code concise. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-06 19:32:14 +0300