summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2010-11-11Input: do not pass injected events back to the originating handlerDmitry Torokhov1-11/+26
Sometimes input handlers (as opposed to input devices) have a need to inject (or re-inject) events back into input core. For example sysrq filter may want to inject previously suppressed Alt-SysRq so that user can take a screen print. In this case we do not want to pass such events back to the same same handler that injected them to avoid loops. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-11Input: pcf8574_keypad - fix error handling in pcf8574_kp_probeDan Carpenter1-13/+10
It is not allowed to call input_free_device() after calling input_unregister_device() because input devices are refcounted and unregister will free the device if we were holding he last referenc. The preferred style in input/ is to make input_register_device() the last function in the probe which can fail. That way we don't need to call input_unregister_device(). Also do not need to call input_set_drvdata() as nothing in the driver uses the data. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-11Input: acecad - fix a memory leak in usb_acecad_probe error pathAxel Lin1-1/+2
Add a missing usb_free_urb() in usb_acecad_probe() error path. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-04Input: atkbd - add 'terminal' parameter for IBM Terminal keyboardsBenjamin LaHaise1-1/+11
Many of the IBM Terminal keyboards from the 1980s and early 1990s communicate using a protocol similar, but not identical to the AT keyboard protocol. (Models known to be like this include 6110344, 6110668, 1390876, 1386887, and possibly others.) When the connector is rewired or adapter to an AT-DIN or PS/2 connector, they can be connected to a standard PC, with three caveats: a) They can only use scancode set 3; requests to use anything else are quietly ignored. b) The AT Command to request Make, Break and Repeat codes is not properly interpreted. c) The top function keys on a 122 key keyboard, and the arrow/edit keys in the middle of the board send non-standard scancodes. C) is easily taken care of in userspace, by use of setkeycodes B) can be taken care of by a userspace hack (that makes the kernel complain in dmesg) A) is fixable in theory, but on the keyboard i tested on (6110668), it seems to be detected unoverridably as Set 2, causing userspace oddities that make it harder to fix C). Enclosed is a small patch to the kernel that fixes A) and B) in the kernel, making it much easier to fix C) in userspace. It adds a single kernel command line parameter that overrides the detection that sets these boards as set 2, and instead of sending the Make-break-repeat command to the keyboard, it sends the make-break command, which is properly recognized by these keyboards. Software level key repeating seems to make up for the lack of hardware repeat codes perfectly. Without manually setting the command line parameter (tentatively named atkbd.terminal), this code has no effect, and the driver works exactly as before. See also: http://www.seasip.info/VintagePC/ibm_1390876.html http://www.seasip.info/VintagePC/ibm_6110344.html http://geekhack.org/showwiki.php?title=Island:7306 Signed-off-by: Erika Quinn <erikas.aubade@gmail.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-04Input: i8042 - add Sony VAIOs to MUX blacklistJesse Barnes1-0/+11
The Sony VPCZ1 doesn't support active multiplexing and trying to enable it causes keyboard to stop working. Since most (all?) VAIOs do not have external PS/2 ports nor they implement active multiplexing properly, and trying to enable MUX usually messes up keyboard/touchpad, let's simply disable MUX probing based on board name (VAIO). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-03Input: export input_reset_device() for use in KGDBDmitry Torokhov1-15/+35
KGDB, much like the resume process, needs to be able to mark all keys that were pressed at the time we dropped into the debuggers as "released", since it is unlikely that the keys stay pressed for the entire duration of the debug session. Also we need to make sure that input_reset_device() and input_dev_suspend() only attempt to change state of currenlt opened devices since closed devices may not be ready to accept IO requests. Tested-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-03Input: adp5588-keys - unify common header definesMichael Hennerich1-49/+25
Unify adp5588-gpio and adp5588-keys common header defines (as per Andrew Morton request). For consistency, move remaining defines and prefix accordingly. No functional changes. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-01Merge branch 'for-linus' of ↵Linus Torvalds3-7/+29
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: appletouch - remove extra KERN_DEBUG use from dprintk Input: bu21013_ts - fix null dereference in error handling Input: ad7879 - prevent invalid finger data reports
2010-10-31Input: appletouch - remove extra KERN_DEBUG use from dprintkJoe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-29Input: bu21013_ts - fix null dereference in error handlingDan Carpenter1-1/+1
bu21013_data could be NULL so better not reference it. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-29Input: ad7879 - prevent invalid finger data reportsMichael Hennerich1-5/+27
Considering following scenario - the touch is present on the screen at the beginning of the last conversion sequence, but by the time the last sequence is finished, the finger is lift off. The AD7879 data available interrupt signals (DAV) completion, however some X,Y values are not valid because the screen inputs were floating during the acquisition. The AD7877 acts differently here, since it only asserts DAV if the touch is still present when the conversion sequence finished. Based on the fact that this can only happen in the last sample of the repeated conversion sequence, we simply skip the last (short glitches are filtered by the AD7879 internal median and average filters). This doesn't cause noticeable side effects, since the minimum conversion interval is 9.44ms. We receive ~100 waypoint samples per second, so we simply delay the result by 9.44ms. We also reject samples where pressure is greater than pressure_max. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-29Merge branch 'stable/xen-pcifront-0.8.2' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm * 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: xen: register xen pci notifier xen: initialize cpu masks for pv guests in xen_smp_init xen: add a missing #include to arch/x86/pci/xen.c xen: mask the MTRR feature from the cpuid xen: make hvc_xen console work for dom0. xen: add the direct mapping area for ISA bus access xen: Initialize xenbus for dom0. xen: use vcpu_ops to setup cpu masks xen: map a dummy page for local apic and ioapic in xen_set_fixmap xen: remap MSIs into pirqs when running as initial domain xen: remap GSIs as pirqs when running as initial domain xen: introduce XEN_DOM0 as a silent option xen: map MSIs into pirqs xen: support GSI -> pirq remapping in PV on HVM guests xen: add xen hvm acpi_register_gsi variant acpi: use indirect call to register gsi in different modes xen: implement xen_hvm_register_pirq xen: get the maximum number of pirqs from xen xen: support pirq != irq * 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits) X86/PCI: Remove the dependency on isapnp_disable. xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright. x86: xen: Sanitse irq handling (part two) swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it. MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer. xen/pci: Request ACS when Xen-SWIOTLB is activated. xen-pcifront: Xen PCI frontend driver. xenbus: prevent warnings on unhandled enumeration values xenbus: Xen paravirtualised PCI hotplug support. xen/x86/PCI: Add support for the Xen PCI subsystem x86: Introduce x86_msi_ops msi: Introduce default_[teardown|setup]_msi_irqs with fallback. x86/PCI: Export pci_walk_bus function. x86/PCI: make sure _PAGE_IOMAP it set on pci mappings x86/PCI: Clean up pci_cache_line_size xen: fix shared irq device passthrough xen: Provide a variant of xen_poll_irq with timeout. xen: Find an unbound irq number in reverse order (high to low). xen: statically initialize cpu_evtchn_mask_p ... Fix up trivial conflicts in drivers/pci/Makefile
2010-10-29input: Monitor both onkey up and down eventHaojian Zhuang1-18/+54
Remove original 3-second ONKEY event. Detect ONKEY changing event directly. So both UP and DOWN event of ONKEY in max8925 are monitered. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-27input: hp680_ts_input: ctrl_in/outX to __raw_read/writeX conversion.Paul Mundt1-8/+8
The ctrl_xxx routines are deprecated, switch over to the __raw_xxx versions. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27input: jornada680_kbd: ctrl_in/outX to __raw_read/writeX conversion.Paul Mundt1-14/+14
The ctrl_xxx routines are deprecated, switch over to the __raw_xxx versions. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-25Merge branch 'davinci-for-linus' of ↵Linus Torvalds6-0/+756
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (50 commits) davinci: fix remaining board support after io_pgoffst removal davinci: mityomapl138: make file local data static arm/davinci: remove duplicated include davinci: Initial support for Omapl138-Hawkboard davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom davinci: add tnetv107x touchscreen platform device input: add driver for tnetv107x touchscreen controller davinci: add keypad config for tnetv107x evm board davinci: add tnetv107x keypad platform device input: add driver for tnetv107x on-chip keypad controller net: davinci_emac: cleanup unused cpdma code net: davinci_emac: switch to new cpdma layer net: davinci_emac: separate out cpdma code net: davinci_emac: cleanup unused mdio emac code omap: cleanup unused davinci mdio arch code davinci: cleanup mdio arch code and switch to phy_id net: davinci_emac: switch to new mdio omap: add mdio platform devices davinci: add mdio platform devices net: davinci_emac: separate out davinci mdio ... Fix up trivial conflict in drivers/input/keyboard/Kconfig (two entries added next to each other - one from the davinci merge, one from the input merge)
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (365 commits) ALSA: hda - Disable sticky PCM stream assignment for AD codecs ALSA: usb - Creative USB X-Fi volume knob support ALSA: ca0106: Use card specific dac id for mute controls. ALSA: ca0106: Allow different sound cards to use different SPI channel mappings. ALSA: ca0106: Create a nice spot for mapping channels to dacs. ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence. ALSA: ca0106: Pull out dac powering routine into separate function. ALSA: ca0106 - add Sound Blaster 5.1vx info. ASoC: tlv320dac33: Use usleep_range for delays ALSA: usb-audio: add Novation Launchpad support ALSA: hda - Add workarounds for CT-IBG controllers ALSA: hda - Fix wrong TLV mute bit for STAC/IDT codecs ASoC: tpa6130a2: Error handling for broken chip ASoC: max98088: Staticise m98088_eq_band ASoC: soc-core: Fix codec->name memory leak ALSA: hda - Apply ideapad quirk to Acer laptops with Cxt5066 ALSA: hda - Add some workarounds for Creative IBG ALSA: hda - Fix wrong SPDIF NID assignment for CA0110 ALSA: hda - Fix codec rename rules for ALC662-compatible codecs ALSA: hda - Add alc_init_jacks() call to other codecs ...
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds50-756/+5051
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits) Input: wacom - specify Cinitq supported tools Input: ab8500-ponkey - fix IRQ freeing in error path Input: adp5588-keys - use more obvious i2c_device_id name string Input: ad7877 - switch to using threaded IRQ Input: ad7877 - use attribute group to control visibility of attributes Input: serio - add support for PS2Mult multiplexer protocol Input: wacom - properly enable runtime PM Input: ad7877 - filter events where pressure is beyond the maximum Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting Input: ad7877 - implement specified chip select behavior Input: hp680_ts_input - use cancel_delayed_work_sync() Input: mousedev - correct lockdep annotation Input: ads7846 - switch to using threaded IRQ Input: serio - support multiple child devices per single parent Input: synaptics - simplify pass-through port handling Input: add ROHM BU21013 touch panel controller support Input: omap4-keypad - wake-up on events & long presses Input: omap4-keypad - fix interrupt line configuration Input: omap4-keypad - SYSCONFIG register configuration Input: omap4-keypad - use platform device helpers ...
2010-10-25Merge branch 'topic/asoc' into for-linusTakashi Iwai1-2/+2
Conflicts: arch/powerpc/platforms/85xx/p1022_ds.c
2010-10-25Merge branch 'next' into for-linusDmitry Torokhov50-756/+5051
2010-10-25Input: wacom - specify Cinitq supported toolsPing Cheng1-12/+30
Cintiq, being a display tablet, doesn't have mouse and associated BTN_s. Make sure we do not specify them when registering Cintiq's input device so that userland can retrieve the exact tool set the device supports. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-25Input: ab8500-ponkey - fix IRQ freeing in error pathNicolas Kaiser1-1/+1
Looks like an obvious typo to me. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-25Merge branch 'for-next' of ↵Linus Torvalds5-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
2010-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds1-0/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (49 commits) serial8250: ratelimit "too much work" error serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster serial: abstraction for 8250 legacy ports serial/imx: check that the buffer is non-empty before sending it out serial: mfd: add more baud rates support jsm: Remove the uart port on errors Alchemy: Add UART PM methods. 8250: allow platforms to override PM hook. altera_uart: Don't use plain integer as NULL pointer altera_uart: Fix missing prototype for registering an early console altera_uart: Fixup type usage of port flags altera_uart: Make it possible to use Altera UART and 8250 ports together altera_uart: Add support for different address strides altera_uart: Add support for getting mapbase and IRQ from resources altera_uart: Add support for polling mode (IRQ-less) serial: Factor out uart_poll_timeout() from 8250 driver serial: mark the 8250 driver as maintained serial: 8250: Don't delay after transmitter is ready. tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver vcs: invoke the vt update callback when /dev/vcs* is written to ...
2010-10-23Merge commit 'konrad/stable/xen-pcifront-0.8.2' into ↵Stefano Stabellini1-0/+2
2.6.36-rc8-initial-domain-v6
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds6-1/+7
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-22Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds1-3/+4
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: block: autoconvert trivial BKL users to private mutex drivers: autoconvert trivial BKL users to private mutex ipmi: autoconvert trivial BKL users to private mutex mac: autoconvert trivial BKL users to private mutex mtd: autoconvert trivial BKL users to private mutex scsi: autoconvert trivial BKL users to private mutex Fix up trivial conflicts (due to addition of private mutex right next to deletion of a version string) in drivers/char/pcmcia/cm40[04]0_cs.c
2010-10-22serport: place serport serio device correctly in the device treeDmitry Eremin-Solenikov1-0/+1
Make serport serio device to be a child of corresponding tty device instead of just hanging at /sys/devices/serioX. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2-2/+12
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits) arm: remove machine_desc.io_pg_offst and .phys_io arm: use addruart macro to establish debug mappings arm: return both physical and virtual addresses from addruart arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC ARM: make struct machine_desc definition coherent with its comment eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free cpuimx27: fix compile when ULPI is selected mach-pcm037_eet: fix compile errors Fixing ethernet driver compilation error for i.MX31 ADS board cpuimx51: update board support mx5: add cpuimx51sd module and its baseboard iomux-mx51: fix GPIO_1_xx 's IOMUX configuration imx-esdhc: update devices registration mx51: add resources for SD/MMC on i.MX51 iomux-mx51: fix SD1 and SD2's iomux configuration clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability clock-mx51: factorize clk_set_parent and clk_get_rate eukrea_mbimxsd: add support for DVI displays cpuimx25 & cpuimx35: fix OTG port registration in host mode i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472 ...
2010-10-21Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (52 commits) sched: fix RCU lockdep splat from task_group() rcu: using ACCESS_ONCE() to observe the jiffies_stall/rnp->qsmask value sched: suppress RCU lockdep splat in task_fork_fair net: suppress RCU lockdep false positive in sock_update_classid rcu: move check from rcu_dereference_bh to rcu_read_lock_bh_held rcu: Add advice to PROVE_RCU_REPEATEDLY kernel config parameter rcu: Add tracing data to support queueing models rcu: fix sparse errors in rcutorture.c rcu: only one evaluation of arg in rcu_dereference_check() unless sparse kernel: Remove undead ifdef CONFIG_DEBUG_LOCK_ALLOC rcu: fix _oddness handling of verbose stall warnings rcu: performance fixes to TINY_PREEMPT_RCU callback checking rcu: upgrade stallwarn.txt documentation for CPU-bound RT processes vhost: add __rcu annotations rcu: add comment stating that list_empty() applies to RCU-protected lists rcu: apply TINY_PREEMPT_RCU read-side speedup to TREE_PREEMPT_RCU rcu: combine duplicate code, courtesy of CONFIG_PREEMPT_RCU rcu: Upgrade srcu_read_lock() docbook about SRCU grace periods rcu: document ways of stalling updates in low-memory situations rcu: repair code-duplication FIXMEs ...
2010-10-21Merge branch 'core-locking-for-linus' of ↵Linus Torvalds3-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: lockdep: Check the depth of subclass lockdep: Add improved subclass caching affs: Use sema_init instead of init_MUTEX hfs: Convert tree_lock to mutex arm: Bcmring: semaphore cleanup printk: Make console_sem a semaphore not a pseudo mutex drivers/macintosh/adb: Do not claim that the semaphore is a mutex parport: Semaphore cleanup irda: Semaphore cleanup net: Wan/cosa.c: Convert "mutex" to semaphore net: Ppp_async: semaphore cleanup hamradio: Mkiss: semaphore cleanup hamradio: 6pack: semaphore cleanup net: 3c527: semaphore cleanup input: Serio/hp_sdc: semaphore cleanup input: Serio/hil_mlc: semaphore cleanup input: Misc/hp_sdc_rtc: semaphore cleanup lockup_detector: Make callback function static lockup detector: Fix grammar by adding a missing "to" in the comments lockdep: Remove __debug_show_held_locks
2010-10-21Merge branch 'davinci-next' into davinci-for-linusKevin Hilman6-0/+756
Conflicts: arch/arm/mach-davinci/board-da830-evm.c arch/arm/mach-davinci/board-da850-evm.c
2010-10-19Merge branch 'for-rmk' of ↵Russell King4-12/+25
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable Conflicts: arch/arm/mach-at91/include/mach/system.h arch/arm/mach-imx/mach-cpuimx27.c AT91 conflict resolution: Acked-by: Anders Larsen <al@alarsen.net> IMX conflict resolution confirmed by Uwe Kleine-König.
2010-10-19Input: adp5588-keys - use more obvious i2c_device_id name stringMichael Hennerich1-1/+1
KBUILD_MODNAME normalizes "-" to "_". This is non-obvious and results in the id name for ADP5588 being "adp5588_keys" while the other supported id is "adp5587-keys". So avoid this define and use an explicit string as the id name. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-18Merge branch 'linus' into core/lockingIngo Molnar4-12/+25
Merge reason: Update to almost-final-.36 Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-18Input: ad7877 - switch to using threaded IRQDmitry Torokhov1-40/+25
Instead of using asynchronous SPI API and then spinning waiting for SPI transfer to complete when disabling the device, let's use threaded IRQ model and spi_sync(). Acked-by: Michael Hennerich <michael.hennerich@analog.com> Tested-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-18Input: ad7877 - use attribute group to control visibility of attributesDmitry Torokhov1-20/+29
Instead of manually creating one set of attributes or another set up is_visible method in attribute group structure to control whether aux3 or gpio3 attribute is presented to userspace. Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-18Input: serio - add support for PS2Mult multiplexer protocolDmitry Eremin-Solenikov3-0/+328
PS2Mult is a simple serial protocol used for multiplexing several PS/2 streams into one serial data stream. It's used e.g. on TQM85xx series of boards. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-18Input: evdev - fix EVIOCSABS regressionDaniel Mack1-1/+1
448cd16 ("Input: evdev - rearrange ioctl handling") broke EVIOCSABS by checking for the wrong direction bit. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Sven Neumann <s.neumann@raumfeld.com> Tested-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-18Input: evdev - fix Ooops in EVIOCGABS/EVIOCSABSDaniel Mack1-0/+6
This fixes a regression introduced by the dynamic allocation of absinfo for input devices. We need to bail out early for input devices which don't have absolute axis. [ 929.664303] Pid: 2989, comm: input Not tainted 2.6.36-rc8+ #14 MS-7260/MS-7260 [ 929.664318] EIP: 0060:[<c12bdc01>] EFLAGS: 00010246 CPU: 0 [ 929.664331] EIP is at evdev_ioctl+0x4f8/0x59f [ 929.664341] EAX: 00000040 EBX: 00000000 ECX: 00000006 EDX: f45a1efc [ 929.664355] ESI: 00000000 EDI: f45a1efc EBP: f45a1f24 ESP: f45a1eb8 [ 929.664369] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 929.664402] f470da74 f6a30e78 f462c240 00000018 bfe4a260 00000000 f45b06fc 00000000 [ 929.664429] <0> 000000c4 b769d000 c3544620 f470da74 f45b06fc f45b06fc f45a1f38 c107dd1f [ 929.664458] <0> f4710b74 000000c4 00000000 00000000 00000000 0000029d 00000a74 f4710b74 [ 929.664500] [<c107dd1f>] ? handle_mm_fault+0x2be/0x59a [ 929.664513] [<c12bd709>] ? evdev_ioctl+0x0/0x59f [ 929.664524] [<c1099d30>] ? do_vfs_ioctl+0x494/0x4d9 [ 929.664538] [<c10432a1>] ? up_read+0x16/0x29 [ 929.664550] [<c101c818>] ? do_page_fault+0x2ff/0x32d [ 929.664564] [<c108d048>] ? do_sys_open+0xc5/0xcf [ 929.664575] [<c1099db6>] ? sys_ioctl+0x41/0x61 [ 929.664587] [<c1002710>] ? sysenter_do_call+0x12/0x36 [ 929.684570] ---[ end trace 11b83e923bd8f2bb ]--- Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-18xenbus: prevent warnings on unhandled enumeration valuesNoboru Iwamatsu1-0/+2
XenbusStateReconfiguring/XenbusStateReconfigured were introduced by c/s 437, but aren't handled in many switch statements. .. also pulled from the linux-2.6-sparse-tree tree. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-18Update broken web addresses in the kernel.Justin P. Mattock5-6/+6
The patch below updates broken web addresses in the kernel Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: Ben Pfaff <blp@cs.stanford.edu> Acked-by: Hans J. Koch <hjk@linutronix.de> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-18Input: wacom - properly enable runtime PMDmitry Torokhov1-3/+6
We need to always call usb_autopm_put_interface() in wacom_open(), not only when initialization fails, otherwise the device will be marked as PM-busy and will never be put in suspended state. Based on patch by Oliver Neukum. Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-18Merge branch 'for-linus' into nextDmitry Torokhov6-17/+34
2010-10-18Input: ad7877 - filter events where pressure is beyond the maximumMichael Hennerich1-0/+7
Suppress events where pressure > pressure_max. These events come typically along with inaccurate X and Y samples. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-18Input: ad7877 - implement EV_KEY:BTN_TOUCH reportingMichael Hennerich1-5/+12
Some input users such as Android or X require BTN_TOUCH events. Implement EV_KEY:BTN_TOUCH and make sure that the release event is not erroneous scheduled without a preceding valid touch. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-18Input: ad7877 - implement specified chip select behaviorMichael Hennerich1-1/+11
According to the AD7877 datasheet: Each transfer operation is 16-bit. If multiple read/write operations are to be performed, CS must be taken high after the end of each read/write operation before another read/write operation can be performed by taking CS low again. Make sure CS toggles after each transfer in the message. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-18Input: hp680_ts_input - use cancel_delayed_work_sync()Tejun Heo1-4/+2
Make hp680_ts_init/exit() call cancel_delayed_work_sync() instead of calling cancel_delayed_work() followed by flush_scheduled_work(). This is to prepare for the deprecation and removal of flush_scheduled_work(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-18Input: mousedev - correct lockdep annotationHitoshi Mitake1-1/+1
When annotating mutex to avoid false lockdep reports we should not be using MOUSEDEV_MIX as lock subclass but rather SINGLE_DEPTH_NESTING. Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-18Input: ads7846 - switch to using threaded IRQJason Wang1-430/+456
Commit 9114337 introduces regulator operations in ads7846 touchscreen driver. Among these operations, some are called while holding a spinlock. On many platforms regulators reside on slow buses, such as I2C/SPI and require sleep while accessing them. The touchscreen itself is also a SPI device and currently relies on asynchronous SPI access to avoid sleeping in interrupt context. Let's switch to using threaded IRQ to be able to access SPI bus synchronously (which simplifies driver a bit); it also allows safe access to the regulators as well. This has been tested on the ti_omap3530evm board: 1) using ts_lib after normal boot 2) using ts_lib after "#echo 1/0 > /sys/bus/spi/devices/spi0.1/disable" 3) using ts_lib after "#echo mem > /sys/power/state" and "wake up" Also tested on pandora. Based on original patch by Dmitry Torokhov. Tested-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-08 11:48:50 +0300