summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2021-11-18Input: st1232 - increase "wait ready" timeoutJohn Keeping1-1/+1
[ Upstream commit 2667f6b7af99e81958fa97c03bb519fcb09d0055 ] I have a ST1633 touch controller which fails to probe due to a timeout waiting for the controller to become ready. Increasing the minimum delay to 100ms ensures that the probe sequence completes successfully. The ST1633 datasheet says nothing about the maximum delay here and the ST1232 I2C protocol document says "wait until" with no notion of a timeout. Since this only runs once during probe, being generous with the timout seems reasonable and most likely the device will become ready eventually. (It may be worth noting that I saw this issue with a PREEMPT_RT patched kernel which probably has tighter wakeups from usleep_range() than other preemption models.) Fixes: f605be6a57b4 ("Input: st1232 - wait until device is ready before reading resolution") Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210929152609.2421483-1-john@metanate.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18Input: ariel-pwrbutton - add SPI device ID tableMark Brown1-0/+7
[ Upstream commit 5c4c2c8e6fac26fa0b80c234d6e9f75d637193af ] Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI device ID table. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210927134104.38648-1-broonie@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18Input: i8042 - Add quirk for Fujitsu Lifebook T725Takashi Iwai1-0/+14
commit 16e28abb7290c4ca3b3a0f333ba067f34bb18c86 upstream. Fujitsu Lifebook T725 laptop requires, like a few other similar models, the nomux and notimeout options to probe the touchpad properly. This patch adds the corresponding quirk entries. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1191980 Tested-by: Neal Gompa <ngompa13@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20211103070019.13374-1-tiwai@suse.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18Input: elantench - fix misreporting trackpoint coordinatesPhoenix Huang1-0/+13
commit be896bd3b72b44126c55768f14c22a8729b0992e upstream. Some firmwares occasionally report bogus data from trackpoint, with X or Y displacement being too large (outside of [-127, 127] range). Let's drop such packets so that we do not generate jumps. Signed-off-by: Phoenix Huang <phoenix@emc.com.tw> Tested-by: Yufei Du <yufeidu@cs.unc.edu> Link: https://lore.kernel.org/r/20210729010940.5752-1-phoenix@emc.com.tw Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18Input: iforce - fix control-message timeoutJohan Hovold1-1/+1
commit 744d0090a5f6dfa4c81b53402ccdf08313100429 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 487358627825 ("Input: iforce - use DMA-safe buffer when getting IDs from USB") Signed-off-by: Johan Hovold <johan@kernel.org> Cc: stable@vger.kernel.org # 5.3 Link: https://lore.kernel.org/r/20211025115501.5190-1-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-18Merge branch 'for-linus' of ↵Linus Torvalds4-34/+68
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a new product ID for the xpad joystick driver - fixes to resistive-adc-touch and snvs_pwrkey drivers - a change to touchscreen helpers to make clang happier * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: touchscreen - avoid bitwise vs logical OR warning Input: xpad - add support for another USB ID of Nacon GC-100 Input: resistive-adc-touch - fix division by zero error on z1 == 0 Input: snvs_pwrkey - add clk handling
2021-10-16Input: touchscreen - avoid bitwise vs logical OR warningNathan Chancellor1-21/+21
A new warning in clang points out a few places in this driver where a bitwise OR is being used with boolean types: drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This use of a bitwise OR is intentional, as bitwise operations do not short circuit, which allows all the calls to touchscreen_get_prop_u32() to happen so that the last parameter is initialized while coalescing the results of the calls to make a decision after they are all evaluated. To make this clearer to the compiler, use the '|=' operator to assign the result of each touchscreen_get_prop_u32() call to data_present, which keeps the meaning of the code the same but makes it obvious that every one of these calls is expected to happen. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reported-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: xpad - add support for another USB ID of Nacon GC-100Michael Cullen1-0/+2
The Nacon GX100XF is already mapped, but it seems there is a Nacon GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other colours exist) with a different USB ID when in XInput mode. Signed-off-by: Michael Cullen <michael@michaelcullen.name> Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: resistive-adc-touch - fix division by zero error on z1 == 0Oleksij Rempel1-13/+16
For proper pressure calculation we need at least x and z1 to be non zero. Even worse, in case z1 we may run in to division by zero error. Fixes: 60b7db914ddd ("Input: resistive-adc-touch - rework mapping of channels") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20211007095727.29579-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: snvs_pwrkey - add clk handlingUwe Kleine-König1-0/+29
On i.MX7S and i.MX8M* (but not i.MX6*) the pwrkey device has an associated clock. Accessing the registers requires that this clock is enabled. Binding the driver on at least i.MX7S and i.MX8MP while not having the clock enabled results in a complete hang of the machine. (This usually only happens if snvs_pwrkey is built as a module and the rtc-snvs driver isn't already bound because at bootup the required clk is on and only gets disabled when the clk framework disables unused clks late during boot.) This completes the fix in commit 135be16d3505 ("ARM: dts: imx7s: add snvs clock to pwrkey"). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211013062848.2667192-1-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-11Merge branch 'for-linus' of ↵Linus Torvalds17-534/+37
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - several device tree bindings for input devices have been converted to yaml - dropped no longer used ixp4xx-beeper and CSR Prima2 PWRC drivers - analog joystick has been converted to use ktime API and no longer warn about low resolution timers - a few driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits) Input: analog - always use ktime functions Input: mms114 - support MMS134S Input: elan_i2c - reduce the resume time for controller in Whitebox Input: edt-ft5x06 - added case for EDT EP0110M09 Input: adc-keys - drop bogus __refdata annotation Input: Fix spelling mistake in Kconfig "useable" -> "usable" Input: Fix spelling mistake in Kconfig "Modul" -> "Module" Input: remove dead CSR Prima2 PWRC driver Input: adp5589-keys - use the right header Input: adp5588-keys - use the right header dt-bindings: input: tsc2005: Convert to YAML schema Input: ep93xx_keypad - prepare clock before using it dt-bindings: input: sun4i-lradc: Add wakeup-source dt-bindings: input: Convert Regulator Haptic binding to a schema dt-bindings: input: Convert Pixcir Touchscreen binding to a schema dt-bindings: input: Convert ChipOne ICN8318 binding to a schema Input: pm8941-pwrkey - fix comma vs semicolon issue dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml dt-bindings: power: reset: Change 'additionalProperties' to true ...
2021-09-09Input: analog - always use ktime functionsGuenter Roeck1-94/+13
m68k, mips, s390, and sparc allmodconfig images fail to build with the following error. drivers/input/joystick/analog.c:160:2: error: #warning Precise timer not defined for this architecture. Remove architecture specific time handling code and always use ktime functions to determine time deltas. Also remove the now useless use_ktime kernel parameter. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/20210907123734.21520-1-linux@roeck-us.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-07Input: mms114 - support MMS134SLinus Walleij1-4/+11
The MMS134S like the MMS136 has an event size of 6 bytes. After this patch, the touchscreen on the Samsung SGH-I407 works fine with PostmarketOS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210706235951.189289-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-07Input: elan_i2c - reduce the resume time for controller in Whiteboxjingle.wu2-1/+3
Similar to controllers found Voxel, Delbin, Magpie and Bobba, the one found in Whitebox does not need to be reset after issuing power-on command, and skipping reset saves resume time. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210907012924.11391-1-jingle.wu@emc.com.tw Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-06Input: edt-ft5x06 - added case for EDT EP0110M09Oliver Graute1-0/+1
Add Support for EP011M09 Firmware Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20210813062110.13950-1-oliver.graute@kococonnector.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-06Merge branch 'next' into for-linusDmitry Torokhov15-439/+331
Prepare input updates for 5.15 merge window.
2021-09-04Input: adc-keys - drop bogus __refdata annotationGeert Uytterhoeven1-1/+1
As the ADC ladder input driver does not have any code or data located in initmem, there is no need to annotate the adc_keys_driver structure with __refdata. Drop the annotation, to avoid suppressing future section warnings. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/7091e8213602be64826fd689a7337246d218f3b1.1626255421.git.geert+renesas@glider.be Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-04Input: Fix spelling mistake in Kconfig "useable" -> "usable"Colin Ian King1-1/+1
There is a spelling mistake in the Kconfig text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210705100230.7583-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-04Input: Fix spelling mistake in Kconfig "Modul" -> "Module"Colin Ian King1-1/+1
There is a spelling mistake in the Kconfig text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210704095702.37567-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-02Merge tag 'for-5.15/parisc' of ↵Linus Torvalds2-5/+2
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture updates from Helge Deller: - Fix a kernel crash when a signal is delivered to bad userspace stack - Fix fall-through warnings in math-emu code - Increase size of gcc stack frame check - Switch coding from 'pci_' to 'dma_' API - Make struct parisc_driver::remove() return void - Some parisc related Makefile changes - Minor cleanups, e.g. change to octal permissions, fix macro collisions, fix PMD_ORDER collision, replace spaces with tabs * tag 'for-5.15/parisc' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: math-emu: Fix fall-through warnings parisc: fix crash with signals and alloca parisc: Fix compile failure when building 64-bit kernel natively parisc: ccio-dma.c: Added tab instead of spaces parisc/parport_gsc: switch from 'pci_' to 'dma_' API parisc: move core-y in arch/parisc/Makefile to arch/parisc/Kbuild parisc: switch from 'pci_' to 'dma_' API parisc: Make struct parisc_driver::remove() return void parisc: remove unused arch/parisc/boot/install.sh and its phony target parisc: Rename PMD_ORDER to PMD_TABLE_ORDER parisc: math-emu: Avoid "fmt" macro collision parisc: Increase size of gcc stack frame check parisc: Replace symbolic permissions with octal permissions
2021-08-31Input: remove dead CSR Prima2 PWRC driverLukas Bulwahn3-218/+0
Commit f3a732843acc ("ARM: remove sirf prima2/atlas platforms") removes the config ARCH_SIRF in ./arch/arm/mach-prima2/Kconfig. Hence, since then, the corresponding CSR Prima2 PWRC Driver is dead code. Remove this dead driver. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210817072842.8640-1-lukas.bulwahn@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-08-31Input: adp5589-keys - use the right headerLinus Walleij1-1/+1
This keyboard driver is implementing a GPIO driver, so it need to include <linux/gpio/driver.h> and not the legacy <linux/gpio.h> header. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20210816232707.485031-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-08-31Input: adp5588-keys - use the right headerLinus Walleij1-1/+1
This keyboard driver is implementing a GPIO driver, so it need to include <linux/gpio/driver.h> and not the legacy <linux/gpio.h> header. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210820222958.57238-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-08-30parisc: Make struct parisc_driver::remove() return voidUwe Kleine-König2-5/+2
The caller of this function (parisc_driver_remove() in arch/parisc/kernel/drivers.c) ignores the return value, so better don't return any value at all to not wake wrong expectations in driver authors. The only function that could return a non-zero value before was ipmi_parisc_remove() which returns the return value of ipmi_si_remove_by_dev(). Make this function return void, too, as for all other callers the value is ignored, too. Also fold in a small checkpatch fix for: WARNING: Unnecessary space before function pointer arguments + void (*remove) (struct parisc_device *dev); Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> (for drivers/input) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-08-30Input: ep93xx_keypad - prepare clock before using itAlexander Sverdlin1-2/+2
Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch to Common Clock Framework. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20210613233041.128961-4-alexander.sverdlin@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-07-24Input: pm8941-pwrkey - fix comma vs semicolon issueDmitry Torokhov1-1/+1
There is absolutely no reason to use comma operator in this code, 2 separate statements make much more sense. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/YPsa1qCBn/SAmE5x@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-07-21bus: Make remove callback return voidUwe Kleine-König2-4/+2
The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21Revert "Input: serio - make write method mandatory"Dmitry Torokhov2-11/+0
This reverts commit 81c7c0a350bfe9306ad9fb10356534ede8f4ab31. The idea to make write method mandatory was flawed as several client drivers (such as atkbd) check for presence of write() method to adjust behavior of the driver. Reported-by: Nathan Chancellor <nathan@kernel.org> Reported-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-07-20Input: parkbd - switch to use module_parport_driver()Andy Shevchenko1-13/+1
Switch to use module_parport_driver() to reduce boilerplate code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210616140432.39406-1-andriy.shevchenko@linux.intel.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-07-20Input: serio - make write method mandatoryDmitry Torokhov2-0/+11
Given that all serio drivers except one implement write() method let's make it mandatory to avoid testing for its presence whenever we attempt to use it. Link: https://lore.kernel.org/r/YFgUxG/TljMuVeQ3@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-07-20Input: ixp4xx-beeper - delete driverLinus Walleij3-196/+0
The NSLU2 has been migrated to devicetree and there we use the gpio-beeper.c driver instead, the boardfile will be deleted for kernel v5.15 so drop this custom and now unneeded driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210714115028.916360-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-07-19Merge tag 'v5.13' into nextDmitry Torokhov7-5/+325
Sync up with the mainline to get the latest parport API.
2021-07-09Merge tag 'for-linus-5.14-rc1' of ↵Linus Torvalds3-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - Support for optimized routines based on the host CPU - Support for PCI via virtio - Various fixes * tag 'for-linus-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: remove unneeded semicolon in um_arch.c um: Remove the repeated declaration um: fix error return code in winch_tramp() um: fix error return code in slip_open() um: Fix stack pointer alignment um: implement flush_cache_vmap/flush_cache_vunmap um: add a UML specific futex implementation um: enable the use of optimized xor routines in UML um: Add support for host CPU flags and alignment um: allow not setting extra rpaths in the linux binary um: virtio/pci: enable suspend/resume um: add PCI over virtio emulation driver um: irqs: allow invoking time-travel handler multiple times um: time-travel/signals: fix ndelay() in interrupt um: expose time-travel mode to userspace side um: export signals_enabled directly um: remove unused smp_sigio_handler() declaration lib: add iomem emulation (logic_iomem) um: allow disabling NO_IOMEM
2021-07-07Merge tag 'Wimplicit-fallthrough-clang-5.14-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull more fallthrough fixes from Gustavo Silva: "Fix maore fall-through warnings when building the kernel with clang and '-Wimplicit-fallthrough'" * tag 'Wimplicit-fallthrough-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: Input: Fix fall-through warning for Clang scsi: aic94xx: Fix fall-through warning for Clang i3c: master: cdns: Fix fall-through warning for Clang net/mlx4: Fix fall-through warning for Clang
2021-07-07Input: Fix fall-through warning for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a fallthrough; statement. Notice that this seems to be a Duff device for performance[1]. So, although the code looks a bit _funny_, I didn't want to refactor or modify it beyond merely adding a fallthrough marking, which might be the least disruptive way to fix this issue. [1] https://www.drdobbs.com/a-reusable-duff-device/184406208 Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-07-06Merge tag 'tty-5.14-rc1' of ↵Linus Torvalds1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver patches for 5.14-rc1. A bit more than normal, but nothing major, lots of cleanups. Highlights are: - lots of tty api cleanups and mxser driver cleanups from Jiri - build warning fixes - various serial driver updates - coding style cleanups - various tty driver minor fixes and updates - removal of broken and disable r3964 line discipline (finally!) All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits) serial: mvebu-uart: remove unused member nb from struct mvebu_uart arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART dt-bindings: mvebu-uart: fix documentation serial: mvebu-uart: correctly calculate minimal possible baudrate serial: mvebu-uart: do not allow changing baudrate when uartclk is not available serial: mvebu-uart: fix calculation of clock divisor tty: make linux/tty_flip.h self-contained serial: Prefer unsigned int to bare use of unsigned serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs serial: qcom_geni_serial: use DT aliases according to DT bindings Revert "tty: serial: Add UART driver for Cortina-Access platform" tty: serial: Add UART driver for Cortina-Access platform MAINTAINERS: add me back as mxser maintainer mxser: Documentation, fix typos mxser: Documentation, make the docs up-to-date mxser: Documentation, remove traces of callout device mxser: introduce mxser_16550A_or_MUST helper mxser: rename flags to old_speed in mxser_set_serial_info mxser: use port variable in mxser_set_serial_info mxser: access info->MCR under info->slock ...
2021-07-05Merge branch 'for-linus' of ↵Linus Torvalds24-195/+537
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for SparkFun Qwiic Joystick - pm8941-pwrkey driver now supports PMK8350 - a bunch of assorted driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits) Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctl Input: hideep - fix the uninitialized use in hideep_nvm_unlock() Input: trackpoint - use kobj_to_dev() Input: atkbd - use kobj_to_dev() Input: tsc200x-core - use kobj_to_dev() Input: ims-pcu - use kobj_to_dev() Input: cros_ec_keyb - use kobj_to_dev() API dt-bindings: input: touchscreen: st1232: Convert to json-schema Input: i8042 - fix typos in comments Input: add SparkFun Qwiic Joystick driver dt-bindings: Add vendor prefix and bindings for Qwiic Joystick Input: cy8ctmg110_ts - switch to using gpiod API Input: cy8ctmg110_ts - switch to using managed resources Input: cy8ctmg110_ts - use endian helpers when converting data on wire Input: cy8ctmg110_ts - let I2C core configure wake interrupt Input: cy8ctmg110_ts - do not hardcode as wakeup source Input: cy8ctmg110_ts - do not hard code interrupt trigger Input: cy8ctmg110_ts - rely on platform code to supply interrupt Input: resistive-adc-touch - fix uninitialized variable 'press' Input: pm8941-pwrkey - add support for PMK8350 PON_HLOS PMIC peripheral ...
2021-07-05Merge branch 'next' into for-linusDmitry Torokhov21-185/+522
Prepare input updates for 5.14 merge window.
2021-07-05Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctlAlexander Larkin1-1/+1
Even though we validate user-provided inputs we then traverse past validated data when applying the new map. The issue was originally discovered by Murray McAllister with this simple POC (if the following is executed by an unprivileged user it will instantly panic the system): int main(void) { int fd, ret; unsigned int buffer[10000]; fd = open("/dev/input/js0", O_RDONLY); if (fd == -1) printf("Error opening file\n"); ret = ioctl(fd, JSIOCSBTNMAP & ~IOCSIZE_MASK, &buffer); printf("%d\n", ret); } The solution is to traverse internal buffer which is guaranteed to only contain valid date when constructing the map. Fixes: 182d679b2298 ("Input: joydev - prevent potential read overflow in ioctl") Fixes: 999b874f4aa3 ("Input: joydev - validate axis/button maps before clobbering current ones") Reported-by: Murray McAllister <murray.mcallister@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Alexander Larkin <avlarkin82@gmail.com> Link: https://lore.kernel.org/r/20210620120030.1513655-1-avlarkin82@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-30Merge tag 'platform-drivers-x86-v5.14-1' of ↵Linus Torvalds1-52/+0
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: "Highlights: - New think-lmi driver adding support for changing Lenovo Thinkpad BIOS settings from within Linux using the standard firmware- attributes class sysfs API - MS Surface aggregator-cdev now also supports forwarding events to user-space (for debugging / new driver development purposes only) - New intel_skl_int3472 driver this provides the necessary glue to translate ACPI table information to GPIOs, regulators, etc. for camera sensors on Intel devices with IPU3 attached MIPI cameras - A whole bunch of other fixes + device-specific quirk additions - New devm_work_autocancel() devm-helpers.h function" * tag 'platform-drivers-x86-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (83 commits) platform/x86: dell-wmi-sysman: Change user experience when Admin/System Password is modified platform/x86: intel_skl_int3472: Uninitialized variable in skl_int3472_handle_gpio_resources() platform/x86: think-lmi: Move kfree(setting->possible_values) to tlmi_attr_setting_release() platform/x86: think-lmi: Split current_value to reflect only the value platform/x86: think-lmi: Fix issues with duplicate attributes platform/x86: think-lmi: Return EINVAL when kbdlang gets set to a 0 length string platform/x86: intel_cht_int33fe: Move to its own subfolder platform/x86: intel_skl_int3472: Move to intel/ subfolder platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_clock() platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_regulator() platform/x86: intel_skl_int3472: Use ACPI GPIO resource directly platform/x86: intel_skl_int3472: Fix dependencies (drop CLKDEV_LOOKUP) platform/x86: intel_skl_int3472: Free ACPI device resources after use platform/x86: Remove "default n" entries platform/x86: ISST: Use numa node id for cpu pci dev mapping platform/x86: ISST: Optimize CPU to PCI device mapping tools/power/x86/intel-speed-select: v1.10 release tools/power/x86/intel-speed-select: Fix uncore memory frequency display extcon: extcon-max8997: Simplify driver using devm extcon: extcon-max8997: Fix IRQ freeing at error path ...
2021-06-20Input: hideep - fix the uninitialized use in hideep_nvm_unlock()Yizhuo Zhai1-3/+10
Inside function hideep_nvm_unlock(), variable "unmask_code" could be uninitialized if hideep_pgm_r_reg() returns error, however, it is used in the later if statement after an "and" operation, which is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@ucr.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-20Input: trackpoint - use kobj_to_dev()YueHaibing1-1/+1
Use kobj_to_dev() instead of container_of() Generated by: scripts/coccinelle/api/kobj_to_dev.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20210607122722.36736-1-yuehaibing@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-20Input: atkbd - use kobj_to_dev()YueHaibing1-1/+1
Use kobj_to_dev() instead of container_of() Generated by: scripts/coccinelle/api/kobj_to_dev.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20210607122653.33784-1-yuehaibing@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-20Input: tsc200x-core - use kobj_to_dev()YueHaibing1-1/+1
Use kobj_to_dev() instead of container_of() Generated by: scripts/coccinelle/api/kobj_to_dev.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20210607122451.36708-1-yuehaibing@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-20Input: ims-pcu - use kobj_to_dev()YueHaibing1-1/+1
Use kobj_to_dev() instead of container_of() Generated by: scripts/coccinelle/api/kobj_to_dev.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20210607122533.10608-1-yuehaibing@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-20Input: cros_ec_keyb - use kobj_to_dev() APIzhouchuangao1-1/+1
Use kobj_to_dev() API instead of container_of(). Signed-off-by: zhouchuangao <zhouchuangao@vivo.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1624025283-56360-1-git-send-email-zhouchuangao@vivo.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-19Input: i8042 - fix typos in commentsTyson Moore1-2/+2
This trivial patch fixes two spelling typos in i8042.c: - 'i8042_unlock_ship()' to 'i8042_unlock_chip()' - 'i8042_controller init' to 'i8042_controller_init' Signed-off-by: Tyson Moore <tyson@tyson.me> Link: https://lore.kernel.org/r/20210612060753.28968-1-tyson@tyson.me Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-19Input: add SparkFun Qwiic Joystick driverOleh Kravchenko3-0/+156
A simple analog joystick built on Low Power ATtiny85 Microcontroller. Directional movements are measured with two 10 kΩ potentiometers connected with a gimbal mechanism that separates the horizontal and vertical movements. This joystick also has a select button that is actuated when the joystick is pressed down. Input events polled over the I2C bus. Product page: https://www.sparkfun.com/products/15168 Firmware and hardware sources: https://github.com/sparkfun/Qwiic_Joystick Tested on RPi4B and O4-iMX-NANO boards. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Reviewed-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210608223130.16830-2-oleg@kaa.org.ua Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-17um: allow disabling NO_IOMEMJohannes Berg3-1/+2
Adjust the kconfig a little to allow disabling NO_IOMEM in UML. To make an "allyesconfig" with CONFIG_NO_IOMEM=n build, adjust a few Kconfig things elsewhere and add dummy asm/fb.h and asm/vga.h files. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-06-07m68k: atari: Fix ATARI_KBD_CORE kconfig unmet dependency warningRandy Dunlap1-3/+0
Since the code for ATARI_KBD_CORE does not use drivers/input/keyboard/ code, just move ATARI_KBD_CORE to arch/m68k/Kconfig.machine to remove the dependency on INPUT_KEYBOARD. Removes this kconfig warning: WARNING: unmet direct dependencies detected for ATARI_KBD_CORE Depends on [n]: !UML && INPUT [=y] && INPUT_KEYBOARD [=n] Selected by [y]: - MOUSE_ATARI [=y] && !UML && INPUT [=y] && INPUT_MOUSE [=y] && ATARI [=y] Fixes: c04cb856e20a ("m68k: Atari keyboard and mouse support.") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Suggested-by: Michael Schmitz <schmitzmic@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20210527001251.8529-1-rdunlap@infradead.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-17 10:29:10 +0300