summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2021-11-23xen: add "not_essential" flag to struct xenbus_driverJuergen Gross1-0/+1
When booting the xenbus driver will wait for PV devices to have connected to their backends before continuing. The timeout is different between essential and non-essential devices. Non-essential devices are identified by their nodenames directly in the xenbus driver, which requires to update this list in case a new device type being non-essential is added (this was missed for several types in the past). In order to avoid this problem, add a "not_essential" flag to struct xenbus_driver which can be set to "true" by the respective frontend. Set this flag for the frontends currently regarded to be not essential (vkbs and vfb) and use it for testing in the xenbus driver. Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211022064800.14978-2-jgross@suse.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-11-12Merge branch 'for-linus' of ↵Linus Torvalds39-433/+1760
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Just one new driver (Cypress StreetFighter touchkey), and no input core changes this time. Plus various fixes and enhancements to existing drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits) Input: iforce - fix control-message timeout Input: wacom_i2c - use macros for the bit masks Input: ili210x - reduce sample period to 15ms Input: ili210x - improve polled sample spacing Input: ili210x - special case ili251x sample read out Input: elantench - fix misreporting trackpoint coordinates Input: synaptics-rmi4 - Fix device hierarchy Input: i8042 - Add quirk for Fujitsu Lifebook T725 Input: cap11xx - add support for cap1206 Input: remove unused header <linux/input/cy8ctmg110_pdata.h> Input: ili210x - add ili251x firmware update support Input: ili210x - export ili251x version details via sysfs Input: ili210x - use resolution from ili251x firmware Input: pm8941-pwrkey - respect reboot_mode for warm reset reboot: export symbol 'reboot_mode' Input: max77693-haptic - drop unneeded MODULE_ALIAS Input: cpcap-pwrbutton - do not set input parent explicitly Input: max8925_onkey - don't mark comment as kernel-doc Input: ads7846 - do not attempt IRQ workaround when deferring probe Input: ads7846 - use input_set_capability() ...
2021-11-12Merge branch 'next' into for-linusDmitry Torokhov39-433/+1760
Prepare input updates for 5.16 merge window.
2021-11-10Input: iforce - fix control-message timeoutJohan Hovold1-1/+1
USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 487358627825 ("Input: iforce - use DMA-safe buffer when getting IDs from USB") Signed-off-by: Johan Hovold <johan@kernel.org> Cc: stable@vger.kernel.org # 5.3 Link: https://lore.kernel.org/r/20211025115501.5190-1-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-10Input: wacom_i2c - use macros for the bit masksAlistair Francis1-6/+16
To make the code easier to read use macros for the bit masks. Signed-off-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20211009113707.17568-2-alistair@alistair23.me Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-10Input: ili210x - reduce sample period to 15msMarek Vasut1-1/+1
Modern devices may redraw display at 60 Hz, make sure we have one input sample per one frame. Reduce sample period to 15ms, so we would get up to 66.6 samples per second, although realistically with all the jitter and extra scheduling wiggle room, we would end up just above 60 samples per second. This should be a good compromise between sampling too often and sampling too seldom. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20211108114145.84118-1-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-10Input: ili210x - improve polled sample spacingMarek Vasut1-2/+8
Currently the ili210x driver implements a threaded interrupt handler which starts upon edge on the interrupt line, and then polls the touch controller for samples. Every time a sample is obtained from the controller, the thread function checks whether further polling is required, and if so, waits fixed amount of time before polling for next sample. The delay between consecutive samples can thus vary greatly, because the I2C transfer required to retrieve the sample from the controller takes different amount of time on different platforms. Furthermore, different models of the touch controllers supported by this driver require different delays during retrieval of samples too. Instead of waiting fixed amount of time before polling for next sample, determine how much time passed since the beginning of sampling cycle and then wait only the remaining amount of time within the sampling cycle. This makes the driver deliver samples with equal spacing between them. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20211108005216.480525-1-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-10Input: ili210x - special case ili251x sample read outMarek Vasut1-5/+13
The ili251x touch controller needs 5ms delay between sending I2C device address and register address, and, writing or reading register data. According to downstream ili251x example code, this 5ms delay is not required when reading touch samples out of the controller. Implement such a special case. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20211108005259.480545-1-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-10Input: elantench - fix misreporting trackpoint coordinatesPhoenix Huang1-0/+13
Some firmwares occasionally report bogus data from trackpoint, with X or Y displacement being too large (outside of [-127, 127] range). Let's drop such packets so that we do not generate jumps. Signed-off-by: Phoenix Huang <phoenix@emc.com.tw> Tested-by: Yufei Du <yufeidu@cs.unc.edu> Link: https://lore.kernel.org/r/20210729010940.5752-1-phoenix@emc.com.tw Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-06Input: synaptics-rmi4 - Fix device hierarchyLoic Poulain1-0/+1
The created rmi device is orphan, which breaks the real device hierarchy, and can cause some trouble, especially during suspend and resume sequences. E.g. in case of I2C, rmi dev should be child of the I2C client device. Fix this, assigning the transport device as parent of the rmi device. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1635514971-18415-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-06Input: i8042 - Add quirk for Fujitsu Lifebook T725Takashi Iwai1-0/+14
Fujitsu Lifebook T725 laptop requires, like a few other similar models, the nomux and notimeout options to probe the touchpad properly. This patch adds the corresponding quirk entries. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1191980 Tested-by: Neal Gompa <ngompa13@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20211103070019.13374-1-tiwai@suse.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-05Merge branch 'for-linus' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - support for Nintendo Switch Pro Controllers and Joy-Cons (Daniel J. Ogorchock) - support for new revision of the NitroKey U2F device firmware (Andrej Shadura) - LED handling improvements for Sony Playstation5 controllers (Roderick Colenbrander) - support for Apple 2021 Magic Keyboard (Alex Henrie) - other assorted code cleanups and new device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (41 commits) HID: nintendo: fix -Werror build HID: playstation: require multicolor LED functionality HID: u2fzero: properly handle timeouts in usb_submit_urb HID: u2fzero: clarify error check and length calculations HID: u2fzero: Support NitroKey U2F revision of the device HID: wacom: Make use of the helper function devm_add_action_or_reset() HID: wacom: Shrink critical section in `wacom_add_shared_data` HID: nintendo: prevent needless queueing of the rumble worker HID: nintendo: ratelimit subcommands and rumble HID: nintendo: improve rumble performance and stability HID: nintendo: add IMU support HID: nintendo: add support for reading user calibration HID: nintendo: add support for charging grip HID: nintendo: set controller uniq to MAC HID: nintendo: reduce device removal subcommand errors HID: nintendo: patch hw version for userspace HID mappings HID: nintendo: send subcommands after receiving input report HID: nintendo: improve subcommand reliability HID: nintendo: add rumble support HID: nintendo: add home led support ...
2021-11-04Merge tag 'tty-5.16-rc1' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.16-rc1. Nothing major in here at all, just lots of tiny serial and tty driver updates for various reported things, and some good cleanups. These include: - more good tty api cleanups from Jiri - stm32 serial driver updates - softlockup fix for non-preempt systems under high serial load - rpmsg serial driver update - 8250 drivers updates and fixes - n_gsm line discipline fixes and updates as people are finally starting to use it. All of these have been in linux-next for a while now with no reported issues" * tag 'tty-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (86 commits) tty: Fix extra "not" in TTY_DRIVER_REAL_RAW description serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE tty: rpmsg: Define tty name via constant string literal tty: rpmsg: Add pr_fmt() to prefix messages tty: rpmsg: Use dev_err_probe() in ->probe() tty: rpmsg: Unify variable used to keep an error code tty: rpmsg: Assign returned id to a local variable serial: stm32: push DMA RX data before suspending serial: stm32: terminate / restart DMA transfer at suspend / resume serial: stm32: rework RX dma initialization and release serial: 8250_pci: Remove empty stub pci_quatech_exit() serial: 8250_pci: Replace custom pci_match_id() implementation serial: xilinx_uartps: Fix race condition causing stuck TX serial: sunzilog: Mark sunzilog_putchar() __maybe_unused Revert "tty: hvc: pass DMA capable memory to put_chars()" Revert "virtio-console: remove unnecessary kmemdup()" serial: 8250_pci: Replace dev_*() by pci_*() macros serial: 8250_pci: Get rid of redundant 'else' keyword serial: 8250_pci: Refactor the loop in pci_ite887x_init() tty: add rpmsg driver ...
2021-11-03Merge tag 'platform-drivers-x86-v5.16-1' of ↵Linus Torvalds1-21/+5
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: "Highlights: - AMD-PMC S0ix support fixes and improvements - HP-WMI support for Omen laptops - New nvidia-wmi-ec-backlight driver - New Intel ISH ECLITE driver - WMI core cleanups - Support for various new Melanox platforms - System76 Laptop support improvements - Surface Laptop Studio support and initial Surface Pro 8 support - Various other small fixes and hardware-id additions" * tag 'platform-drivers-x86-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (106 commits) platform/x86: system76_acpi: Fix input device error handling platform/x86: touchscreen_dmi: Add info for the Viglen Connect 10 tablet platform/surface: aggregator_registry: Add initial support for Surface Pro 8 platform/x86: mlx-platform: Add support for new system SGN2410 platform/x86: mlx-platform: Add BIOS attributes for CoffeeLake COMEx based systems platform/x86: mlx-platform: Extend FAN and LED configuration to support new MQM97xx systems platform/x86: asus-wmi: rename platform_profile_* function symbols platform/x86: hp-wmi: rename platform_profile_* function symbols platform/x86: amd-pmc: Drop check for valid alarm time platform/x86: amd-pmc: Downgrade dev_info message to dev_dbg platform/x86: amd-pmc: fix compilation without CONFIG_RTC_SYSTOHC_DEVICE platform/x86: system76_acpi: fix Kconfig dependencies platform/x86: barco-p50-gpio: use KEY_VENDOR for button instead of KEY_RESTART platform/x86: sony-laptop: replace snprintf in show functions with sysfs_emit platform/x86: lg-laptop: replace snprintf in show functions with sysfs_emit docs: ABI: fix documentation warning in sysfs-driver-mlxreg-io platform/x86: wmi: change notification handler type HID: surface-hid: Allow driver matching for target ID 1 devices HID: surface-hid: Use correct event registry for managing HID events platform/surface: aggregator_registry: Add support for Surface Laptop Studio ...
2021-11-03Input: cap11xx - add support for cap1206Jesse Taube1-14/+29
According to the datasheet "The CAP1206 is pin- and register-compatible with the CAP1106, with the exception of the GAIN[1:0] bits and ALT_POL bit"(57). So, this patch aims to disable them as they are no longer used. Signed-off-by: Jesse Taube <mr.bossman075@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-27HID: nintendo: add IMU supportDaniel J. Ogorchock1-0/+10
This patch adds support for the controller's IMU. The accelerometer and gyro data are both provided to userspace using a second input device. The devices can be associated using their uniq value (set to the controller's MAC address). A large part of this patch's functionality was provided by Carl Mueller. The IMU device is blacklisted from the joydev input handler. Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-10-19Input: axp20x-pek - Use new soc_intel_is_cht() helperHans de Goede1-21/+5
Use the new soc_intel_is_cht() helper to find out if we are running on a CHT device rather then checking the ACPI _HRV field. This is more reliable (some CHT devices have been found where the _HRV for the PMIC is 2 rather then 3) and leads to a nice cleanup. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211018143324.296961-4-hdegoede@redhat.com
2021-10-18Merge 5.15-rc6 into tty-nextGreg Kroah-Hartman4-34/+68
We need the serial/tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-18Merge branch 'for-linus' of ↵Linus Torvalds4-34/+68
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a new product ID for the xpad joystick driver - fixes to resistive-adc-touch and snvs_pwrkey drivers - a change to touchscreen helpers to make clang happier * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: touchscreen - avoid bitwise vs logical OR warning Input: xpad - add support for another USB ID of Nacon GC-100 Input: resistive-adc-touch - fix division by zero error on z1 == 0 Input: snvs_pwrkey - add clk handling
2021-10-17Input: ili210x - add ili251x firmware update supportMarek Vasut2-0/+309
The ili251x firmware can be updated, this is used when switching between different modes of operation of the touch surface, e.g. glove operation. This patch implements the firmware update mechanism triggered by a write into an sysfs attribute. The firmware itself is distributed as an intel hex file with non-standard types. The first two lines are of type 0xad, which indicates the start of DataFlash payload, that is always at address 0xf000 on the ili251x, so it can be dropped, and 0xac which indicates the position of firmware info in the Application payload, that is always at address 0x2020 on the ili251x and we do not care. The rest of the firmware is data of type 0x00, and we care about that. To convert the firmware hex file into something usable by the kernel, remove the first two lines and then use ihex2fw: $ tail -n +3 input.hex > temp.hex $ ./tools/firmware/ihex2fw temp.hex firmware/ilitek/ili251x.bin To trigger the firmware update, place firmware file ilitek/ili251x.bin into /lib/firmware/, write into firmware_update sysfs attribute and wait about 30-40 seconds. The firmware update is slow. Afterward, verify the firmware_version and mode sysfs attributes to check whether the firmware got updated and the controller switched back to application (AP) mode by reading out 'mode' attribute in sysfs. Note that the content of firmware_version, e.g. 0600.0005.abcd.aa04 can be matched to the content of the firmware hex file. The first four bytes, 0x06 0x00 0x00 0x05 can be found at ^:102030 00 05000006, the next four bytes 0xab 0xcd 0xaa 0x04 at ^:10F000 00 nnnnnnnn ABCDAA04. Note that the protocol differs considerably between the ili2xxx devices, this patch therefore implements this functionality only for ili251x that I can test. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20210831202506.181927-3-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-17Input: ili210x - export ili251x version details via sysfsMarek Vasut1-3/+162
The ili251x firmware protocol permits readout of firmware version, protocol version, mcu version and current mode (application, boot loader, forced update). These information are useful when updating the firmware on the il251x, e.g. to avoid updating the same firmware into the device multiple times. The locking is now necessary to avoid races between interrupt handler and the sysfs readouts. Note that the protocol differs considerably between the ili2xxx devices, this patch therefore implements this functionality only for ili251x that I can test. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20210831202506.181927-2-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-17Input: ili210x - use resolution from ili251x firmwareMarek Vasut1-0/+56
The ili251x firmware protocol permits readout of panel resolution, implement this, but make it possible to override this value using DT bindings. This way, older DTs which contain touchscreen-size-x and touchscreen-size-y properties will behave just like before and new DTs may avoid specifying these for ILI251x. Note that the command format is different on other controllers, so this functionality is isolated to ILI251x. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20210831202506.181927-1-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-17Input: pm8941-pwrkey - respect reboot_mode for warm resetShawn Guo1-1/+5
On some devices, e.g. Sony Xperia M4 Aqua, warm reset is used to reboot device into bootloader and recovery mode. Instead of always doing hard reset, add a check on reboot_mode for possible warm reset. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20210714095850.27185-3-shawn.guo@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-17Input: max77693-haptic - drop unneeded MODULE_ALIASKrzysztof Kozlowski1-1/+0
The MODULE_DEVICE_TABLE already creates proper alias for platform driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210916170514.137977-1-krzysztof.kozlowski@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-17Input: cpcap-pwrbutton - do not set input parent explicitlyDmitry Torokhov1-1/+0
We are using devm_input_allocate_device() that already sets parent of the input device, there is no need to do that again. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/YWpiZqrfC9+GQsM4@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: touchscreen - avoid bitwise vs logical OR warningNathan Chancellor1-21/+21
A new warning in clang points out a few places in this driver where a bitwise OR is being used with boolean types: drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This use of a bitwise OR is intentional, as bitwise operations do not short circuit, which allows all the calls to touchscreen_get_prop_u32() to happen so that the last parameter is initialized while coalescing the results of the calls to make a decision after they are all evaluated. To make this clearer to the compiler, use the '|=' operator to assign the result of each touchscreen_get_prop_u32() call to data_present, which keeps the meaning of the code the same but makes it obvious that every one of these calls is expected to happen. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reported-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: xpad - add support for another USB ID of Nacon GC-100Michael Cullen1-0/+2
The Nacon GX100XF is already mapped, but it seems there is a Nacon GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other colours exist) with a different USB ID when in XInput mode. Signed-off-by: Michael Cullen <michael@michaelcullen.name> Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: resistive-adc-touch - fix division by zero error on z1 == 0Oleksij Rempel1-13/+16
For proper pressure calculation we need at least x and z1 to be non zero. Even worse, in case z1 we may run in to division by zero error. Fixes: 60b7db914ddd ("Input: resistive-adc-touch - rework mapping of channels") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20211007095727.29579-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: snvs_pwrkey - add clk handlingUwe Kleine-König1-0/+29
On i.MX7S and i.MX8M* (but not i.MX6*) the pwrkey device has an associated clock. Accessing the registers requires that this clock is enabled. Binding the driver on at least i.MX7S and i.MX8MP while not having the clock enabled results in a complete hang of the machine. (This usually only happens if snvs_pwrkey is built as a module and the rtc-snvs driver isn't already bound because at bootup the required clk is on and only gets disabled when the clk framework disables unused clks late during boot.) This completes the fix in commit 135be16d3505 ("ARM: dts: imx7s: add snvs clock to pwrkey"). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211013062848.2667192-1-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: max8925_onkey - don't mark comment as kernel-docRandy Dunlap1-1/+1
Change the comment to a normal (non-kernel-doc) comment to avoid these kernel-doc warnings: max8925_onkey.c:2: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * MAX8925 ONKEY driver max8925_onkey.c:2: warning: missing initial short description on line: * MAX8925 ONKEY driver Fixes: 3734574cac100 ("Input: enable onkey driver of max8925") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20211002045943.9406-1-rdunlap@infradead.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: ads7846 - do not attempt IRQ workaround when deferring probeDmitry Torokhov1-1/+1
When request_irq() returns -EPORBE_DEFER we should abort probe and try again later instead of trying to engage IRQ trigger workaround. Link: https://lore.kernel.org/r/20210910045039.4020199-3-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: ads7846 - use input_set_capability()Dmitry Torokhov1-2/+1
Instead of manipulating capability bits directly use input_set_capability(). Also stop setting EV_ABS explicitly as input_set_abs_params() does it for us. Link: https://lore.kernel.org/r/20210910045039.4020199-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: ads7846 - set input device bus type and product IDDmitry Torokhov1-0/+3
Set input device's bus type as BUS_SPI and use model as product ID. Link: https://lore.kernel.org/r/20210910045039.4020199-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: tm2-touchkey - allow changing keycodes from userspaceStephan Gerhold1-0/+4
At the moment the touch keys have key codes assigned from the device tree. In some cases, users might want to change the key code from userspace. There is existing functionality for this in the input core using the EVIOCSKEYCODE ioctl, which is integrated for example into udev. Make it possible to use this functionality for tm2-touchkey by simply making the input core aware of the array that holds the keycodes. Similar code also exists in mcs_touchkey and mpr121_touchkey. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20211013112305.41574-2-stephan@gerhold.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: tm2-touchkey - report scan codesStephan Gerhold1-0/+3
Report the index of pressed touch key as MSC_SCAN code to userspace so it is possible to identify which of the keys was pressed (not just the function that is currently assigned to the key). This is done similarly also in mcs_touchkey and mpr121_touchkey. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20211013112305.41574-1-stephan@gerhold.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: adxl34x - fix sparse warningDmitry Torokhov1-1/+1
This fixes the following warning from sparse: CC [M] drivers/input/misc/adxl34x.o CHECK drivers/input/misc/adxl34x.c drivers/input/misc/adxl34x.c:245:29: warning: cast to restricted __le16 drivers/input/misc/adxl34x.c:248:29: warning: cast to restricted __le16 drivers/input/misc/adxl34x.c:251:29: warning: cast to restricted __le16 Acked-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/YWZIjb91d6aAwgss@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: ep93xx_keypad - switch to using managed resourcesDmitry Torokhov1-81/+37
By using managed resources (devm) we are able to streamline error handling in probe and remove most of the custom remove method. Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/YWZGKWgdarGtvtYA@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: ep93xx_keypad - use dev_pm_set_wake_irq()Dmitry Torokhov1-6/+7
Instead of manually toggling interrupt as wakeup source in suspend/resume methods, let's declare keypad interrupt and wakeup interrupt and leave the rest to the PM core. Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20211012013735.3523140-3-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: ep93xx_keypad - use BIT() and GENMASK() macrosDmitry Torokhov1-18/+19
Also drop parenthesis around macros that do not use expressions as they are not needed. Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20211012013735.3523140-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16Input: ep93xx_keypad - annotate suspend/resume as __maybe_unusedDmitry Torokhov1-4/+2
Instead of guarding suspend/resume methods with #ifdef CONFIG_PM let's mark them as __maybe_unused as this allows better compile coverage. Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20211012013735.3523140-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-13Input: tsc200x - make tsc200x_remove() return voidUwe Kleine-König4-6/+8
Up to now tsc200x_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211012153945.2651412-7-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-13Input: adxl34x - make adxl34x_remove() return voidUwe Kleine-König4-6/+8
Up to now adxl34x_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211012153945.2651412-6-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-12Input: st1232 - prefer asynchronous probingJohn Keeping1-0/+1
The device may take up to 100ms to become responsive during probe, so prefer asynchronous probing to avoid delaying the rest of the system. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: John Keeping <john@metanate.com> Link: https://lore.kernel.org/r/20211007111217.1935858-1-john@metanate.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-12Input: st1232 - increase "wait ready" timeoutJohn Keeping1-1/+1
I have a ST1633 touch controller which fails to probe due to a timeout waiting for the controller to become ready. Increasing the minimum delay to 100ms ensures that the probe sequence completes successfully. The ST1633 datasheet says nothing about the maximum delay here and the ST1232 I2C protocol document says "wait until" with no notion of a timeout. Since this only runs once during probe, being generous with the timout seems reasonable and most likely the device will become ready eventually. (It may be worth noting that I saw this issue with a PREEMPT_RT patched kernel which probably has tighter wakeups from usleep_range() than other preemption models.) Fixes: f605be6a57b4 ("Input: st1232 - wait until device is ready before reading resolution") Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210929152609.2421483-1-john@metanate.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-05Input: analog - fix invalid snprintf() callArnd Bergmann1-8/+10
Overlapping input and output arguments to snprintf() are undefined behavior in C99: drivers/input/joystick/analog.c: In function 'analog_name': drivers/input/joystick/analog.c:428:3: error: 'snprintf' argument 4 overlaps destination object 'analog' [-Werror=restrict] 428 | snprintf(analog->name, sizeof(analog->name), "%s %d-hat", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 429 | analog->name, hweight16(analog->mask & ANALOG_HATS_ALL)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/input/joystick/analog.c:420:40: note: destination object referenced by 'restrict'-qualified argument 1 was declared here 420 | static void analog_name(struct analog *analog) | ~~~~~~~~~~~~~~~^~~~~~ Change this function to use the simpler seq_buf interface instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210927101416.1569609-1-arnd@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-02Input: ariel-pwrbutton - add SPI device ID tableMark Brown1-0/+7
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI device ID table. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210927134104.38648-1-broonie@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-23Input: mpr121 - make use of the helper function devm_add_action_or_reset()Cai Huoqing1-2/+2
The helper function devm_add_action_or_reset() will internally call devm_add_action(), and if devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210922125954.533-1-caihuoqing@baidu.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-23Input: raydium_i2c_ts - make use of the helper function ↵Cai Huoqing1-2/+2
devm_add_action_or_reset() The helper function devm_add_action_or_reset() will internally call devm_add_action(), and if devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210922125212.95-3-caihuoqing@baidu.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-23Input: elants_i2c - make use of devm_add_action_or_reset()Cai Huoqing1-2/+2
The helper function devm_add_action_or_reset() will internally call devm_add_action(), and if devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210922125212.95-2-caihuoqing@baidu.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-22tty: make tty_ldisc_ops::hangup return voidJiri Slaby1-2/+1
The documentation says that the return value of tty_ldisc_ops::hangup hook is ignored. And it really is, so there is no point for its return type to be int. Switch it to void and all the hooks too. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210914091134.17426-4-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-28 03:40:10 +0300