summaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen
AgeCommit message (Collapse)AuthorFilesLines
2021-05-07Merge branch 'for-linus' of ↵Linus Torvalds25-543/+2143
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - three new touchscreen drivers: Hycon HY46XX, ILITEK Lego Series, and MStar MSG2638 - a new driver for Azoteq IQS626A proximity and touch controller - addition of Amazon Game Controller to the list of devices handled by the xpad driver - Elan touchscreen driver will avoid binding to devices described as I2CHID compatible in ACPI tables - various driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (56 commits) Input: xpad - add support for Amazon Game Controller Input: ili210x - add missing negation for touch indication on ili210x MAINTAINERS: repair reference in HYCON HY46XX TOUCHSCREEN SUPPORT Input: add driver for the Hycon HY46XX touchpanel series dt-bindings: touchscreen: Add HY46XX bindings dt-bindings: Add Hycon Technology vendor prefix Input: cyttsp - flag the device properly Input: cyttsp - set abs params for ABS_MT_TOUCH_MAJOR Input: cyttsp - drop the phys path Input: cyttsp - reduce reset pulse timings Input: cyttsp - error message on boot mode exit error Input: apbps2 - remove useless variable Input: mms114 - support MMS136 Input: mms114 - convert bindings to YAML and extend Input: Add support for ILITEK Lego Series dt-bindings: input: touchscreen: ilitek_ts_i2c: Add bindings Input: add MStar MSG2638 touchscreen driver dt-bindings: input/touchscreen: add bindings for msg2638 Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated devices ...
2021-05-07Input: ili210x - add missing negation for touch indication on ili210xHansem Ro1-1/+1
This adds the negation needed for proper finger detection on Ilitek ili2107/ili210x. This fixes polling issues (on Amazon Kindle Fire) caused by returning false for the cooresponding finger on the touchscreen. Signed-off-by: Hansem Ro <hansemro@outlook.com> Fixes: e3559442afd2a ("ili210x - rework the touchscreen sample processing") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-04Merge branch 'next' into for-linusDmitry Torokhov25-545/+2143
Prepare input updates for 5.13 merge window.
2021-04-26Merge tag 'arm-drivers-5.13' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: TEE/OP-TEE: - Add tracepoints around calls to secure world Memory controller drivers: - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms - Add debug statistics to Tegra20 memory controller - Update Tegra bindings and convert to dtschema ARM SCMI Firmware: - Support for modular SCMI protocols and vendor specific extensions - New SCMI IIO driver - Per-cpu DVFS The other driver changes are all from the platform maintainers directly and reflect the drivers that don't fit into any other subsystem as well as treewide changes for a particular platform. SoCFPGA: - Various cleanups contributed by Krzysztof Kozlowski Mediatek: - add MT8183 support to mutex driver - MMSYS: use per SoC array to describe the possible routing - add MMSYS support for MT8183 and MT8167 - add support for PMIC wrapper with integrated arbiter - add support for MT8192/MT6873 Tegra: - Bug fixes to PMC and clock drivers NXP/i.MX: - Update SCU power domain driver to keep console domain power on. - Add missing ADC1 power domain to SCU power domain driver. - Update comments for single global power domain in SCU power domain driver. - Add i.MX51/i.MX53 unique id support to i.MX SoC driver. NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers OMAP: - Preparation to use devicetree for genpd - ti-sysc needs iorange check improved when the interconnect target module has no control registers listed - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid issues with missing resources and unnecessary deferred probe - ti-sysc debug option can now detect more devices - ti-sysc now warns if an old incomplete devicetree data is found as we now rely on it being complete for am3 and 4 - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7 - omap-prm driver needs to enable autoidle retention support for omap4 - omap5 clocks are missing gpmc and ocmc clock registers - pci-dra7xx now needs to use builtin_platform_driver instead of using builtin_platform_driver_probe for deferred probe to work Raspberry Pi: - Fix-up all RPi firmware drivers so as for unbind to happen in an orderly fashion - Support for RPi's PoE hat PWM bus Qualcomm - Improved detection for SCM calling conventions - Support for OEM specific wifi firmware path - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP" * tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: aspeed: fix a ternary sign expansion bug memory: mtk-smi: Add device-link between smi-larb and smi-common memory: samsung: exynos5422-dmc: handle clk_set_parent() failure memory: renesas-rpc-if: fix possible NULL pointer dereference of resource clk: socfpga: fix iomem pointer cast on 64-bit soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning soc: fsl: enable acpi support in RCPM driver soc: qcom: mdt_loader: Detect truncated read of segments soc: qcom: mdt_loader: Validate that p_filesz < p_memsz soc: qcom: pdr: Fix error return code in pdr_register_listener firmware: qcom_scm: Fix kernel-doc function names to match firmware: qcom_scm: Suppress sysfs bind attributes firmware: qcom_scm: Workaround lack of "is available" call on SC7180 firmware: qcom_scm: Reduce locking section for __get_convention() firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers" ...
2021-04-15Merge branch 'for-linus' of ↵Linus Torvalds2-5/+4
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a few driver fixes here" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elants_i2c - drop zero-checking of ABS_MT_TOUCH_MAJOR resolution Input: elants_i2c - fix division by zero if firmware reports zero phys size Input: nspire-keypad - enable interrupts only when opened Input: i8042 - fix Pegatron C15B ID entry Input: n64joy - fix return value check in n64joy_probe() Input: s6sy761 - fix coordinate read bit shift
2021-04-14Input: add driver for the Hycon HY46XX touchpanel seriesGiulio Benetti3-0/+603
This patch adds support for Hycon HY46XX. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Link: https://lore.kernel.org/r/20210413144446.2277817-4-giulio.benetti@benettiengineering.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: cyttsp - flag the device properlyLinus Walleij1-1/+1
This device is certainly a very simple touchscreen so we set INPUT_MT_DIRECT. Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210408131153.3446138-9-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: cyttsp - set abs params for ABS_MT_TOUCH_MAJORLinus Walleij1-0/+3
The driver is certainly reporting pressure in cyttsp_report_tchdata() with input_report_abs(input, ABS_MT_TOUCH_MAJOR, tch->z); so we should also advertise this capability. Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210408131153.3446138-8-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: cyttsp - drop the phys pathLinus Walleij2-3/+0
When I test to use the CY8CTMA340 with PostmarketOS I don't have any problem whatsoever in dropping this phys path, it finds and uses the touchscreen just as well. I suppose it is because userspace is using modern input libraries. I challenge the maintainers to point out a valid and still used userspace that actually need this. I say we drop it. Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210408131153.3446138-7-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: cyttsp - reduce reset pulse timingsLinus Walleij1-2/+8
The data sheet for CY8CTMA340 specifies that the reset pulse shall be at least 1 ms. Specify 1-2 ms with usleep_range() to cut some slack for the scheduler. Curiously the datasheet does not specify how long we have to wait after a hard reset until the chip is up, but I have found a vendor tree (Samsung GT-S7710) that has code for this touch screen and there this is set to 5 ms so I use this with the same 1 ms fuzz. Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210408131153.3446138-6-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: cyttsp - error message on boot mode exit errorLinus Walleij1-1/+3
Provide a proper error message when attempting to exit boot loader mode and failing, which is something that happened to me. Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210408131153.3446138-5-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: mms114 - support MMS136Linus Walleij1-6/+16
The Melfas MMS136 is similar to the other MMS variants but has event packages of 6 bytes rather than 8 as the others. The define is named FINGER_EVENT_SZ in the vendor drivers so I renamed it from MMS*_PACKET_SZ to MMS*_EVENT_SZ. After this patch, the touchscreen on the Samsung GT-I8530 works fine with PostmarketOS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210404232619.3092682-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: Add support for ILITEK Lego SeriesJoe Hung3-0/+703
Add support for ILITEK Lego series of touch devices. Lego series includes ILITEK 213X/23XX/25XX. Tested/passed with evaluation board with ILI2520/2322 IC. Signed-off-by: Joe Hung <joe_hung@ilitek.com> Link: https://lore.kernel.org/r/20210324122601.125873-2-joe_hung@ilitek.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: add MStar MSG2638 touchscreen driverVincent Knecht3-0/+350
Add support for the msg2638 touchscreen IC from MStar. Firmware handling, wakeup gestures and other specialties are not supported. This driver reuses zinitix.c structure, while the checksum and irq handler functions are based on out-of-tree driver for Alcatel Idol 3 (4.7"). Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210305153815.126937-2-vincent.knecht@mailoo.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: silead - add workaround for x86 BIOS-es which bring the chip up in a ↵Hans de Goede1-4/+40
stuck state Some buggy BIOS-es bring up the touchscreen-controller in a stuck state where it blocks the I2C bus. Specifically this happens on the Jumper EZpad 7 tablet model. After much poking at this problem I have found that the following steps are necessary to unstuck the chip / bus: 1. Turn off the Silead chip. 2. Try to do an I2C transfer with the chip, this will fail in response to which the I2C-bus-driver will call: i2c_recover_bus() which will unstuck the I2C-bus. Note the unstuck-ing of the I2C bus only works if we first drop the chip of the bus by turning it off. 3. Turn the chip back on. On the x86/ACPI systems were this problem is seen, step 1. and 3. require making ACPI calls and dealing with ACPI Power Resources. This commit adds a workaround which runtime-suspends the chip to turn it off, leaving it up to the ACPI subsystem to deal with all the ACPI specific details. There is no good way to detect this bug, so the workaround gets activated by a new "silead,stuck-controller-bug" boolean device-property. Since this is only used on x86/ACPI, this will be set by model specific device-props set by drivers/platform/x86/touchscreen_dmi.c. Therefor this new device-property is not documented in the DT-bindings. Dmesg will contain the following messages on systems where the workaround is activated: [ 54.309029] silead_ts i2c-MSSL1680:00: [Firmware Bug]: Stuck I2C bus: please ignore the next 'controller timed out' error [ 55.373593] i2c_designware 808622C1:04: controller timed out [ 55.582186] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210405202745.16777-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated devicesHans de Goede1-2/+42
Several users have been reporting that elants_i2c gives several errors during probe and that their touchscreen does not work on their Lenovo AMD based laptops with a touchscreen with a ELAN0001 ACPI hardware-id: [ 0.550596] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vcc33 not found, using dummy regulator [ 0.551836] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vccio not found, using dummy regulator [ 0.560932] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.562427] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.595925] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.597974] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.621893] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.622504] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.632650] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (4d 61 69 6e): -121 [ 0.634256] elants_i2c i2c-ELAN0001:00: boot failed: -121 [ 0.699212] elants_i2c i2c-ELAN0001:00: invalid 'hello' packet: 00 00 ff ff [ 1.630506] elants_i2c i2c-ELAN0001:00: Failed to read fw id: -121 [ 1.645508] elants_i2c i2c-ELAN0001:00: unknown packet 00 00 ff ff Despite these errors, the elants_i2c driver stays bound to the device (it returns 0 from its probe method despite the errors), blocking the i2c-hid driver from binding. Manually unbinding the elants_i2c driver and binding the i2c-hid driver makes the touchscreen work. Check if the ACPI-fwnode for the touchscreen contains one of the i2c-hid compatiblity-id strings and if it has the I2C-HID spec's DSM to get the HID descriptor address, If it has both then make elants_i2c not bind, so that the i2c-hid driver can bind. This assumes that non of the (older) elan touchscreens which actually need the elants_i2c driver falsely advertise an i2c-hid compatiblity-id + DSM in their ACPI-fwnodes. If some of them actually do have this false advertising, then this change may lead to regressions. While at it also drop the unnecessary DEVICE_NAME prefixing of the "I2C check functionality error", dev_err already outputs the driver-name. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207759 Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210405202756.16830-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-29Input: elants_i2c - drop zero-checking of ABS_MT_TOUCH_MAJOR resolutionDmitry Osipenko1-2/+1
Drop unnecessary zero-checking of ABS_MT_TOUCH_MAJOR resolution since there is no difference between setting resolution to 0 vs not setting it at all. This change makes code cleaner a tad. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210328235507.19240-1-digetx@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-28Input: elants_i2c - fix division by zero if firmware reports zero phys sizeDmitry Osipenko1-1/+1
Touchscreen firmware of ASUS Transformer TF700T reports zeros for the phys size. Hence check whether the size is zero and don't set the resolution in this case. Reported-by: Jasper Korten <jja2000@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210302100824.3423-1-digetx@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-26Input: move to use request_irq by IRQF_NO_AUTOEN flagBarry Song9-23/+15
disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable because of requesting. On the other hand, request_irq() after setting IRQ_NOAUTOEN as below irq_set_status_flags(irq, IRQ_NOAUTOEN); request_irq(dev, irq...); can also be replaced by request_irq() with IRQF_NO_AUTOEN flag. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Link: https://lore.kernel.org/r/20210302224916.13980-3-song.bao.hua@hisilicon.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Merge tag 'v5.12-rc4' into nextDmitry Torokhov2-5/+8
Sync up with the mainline to bring in newest APIs.
2021-03-25Input: cyttsp - verbose error on soft resetLinus Walleij1-5/+8
The first thing the Cypress driver does when starting up is to try a soft reset. This is the first point where the driver SPI/I2C communication can fail, so put out some nice debug text: cyttsp-spi spi2.0: failed to send soft reset Instead of just: cyttsp-spi: probe of spi2.0 failed with error -5 This is more helpful. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210322221349.1116666-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: iqs5xx - make reset GPIO optionalJeff LaBundy1-8/+17
The device's hardware reset pin is only required if the platform must be able to update the device's firmware. As such, demote the reset GPIO to optional in support of devices that ship with pre-programmed firmware and don't route the reset pin back to the SoC. In that case, the 'fw_file' attribute is hidden because there is no way to open the bootloader. The logic is extended to the case in which the device does not advertise bootloader support in the first place. Last but not least, remove the hardware reset performed at probe because there is no reason to reset the device manually. A power on reset function already ensures a clean reset at start-up. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210323021006.367-1-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: touchscreen - move helper functions to coreJeff LaBundy3-211/+0
Some devices outside of drivers/input/touchscreen/ can still make use of the touchscreen helper functions. Therefore, it was agreed in [1] to move them outside of drivers/input/touchscreen/ so that other devices can call them without INPUT_TOUCHSCREEN being set. As part of this change, 'of' is dropped from the filename because the helpers no longer actually use OF. No changes are made to the file contents whatsoever. Based on the feedback in [2], the corresponding binding documents (touchscreen.yaml and touchscreen.txt) are left in their original locations. [1] https://patchwork.kernel.org/patch/11924029/ [2] https://patchwork.kernel.org/patch/12042037/ Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210301234928.4298-2-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: wacom_i2c - switch to using managed resourcesDmitry Torokhov1-38/+17
This simplifies error unwinding path and allows us to get rid of remove() method. Reviewed-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20210321220043.318239-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: wacom_i2c - do not force interrupt triggerDmitry Torokhov1-2/+1
Instead of forcing interrupt trigger to "level low" rely on the platform to set it up according to how it is wired on the given board. Reviewed-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20210321220043.318239-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: iqs5xx - close bootloader using hardware resetJeff LaBundy1-17/+7
The bootloader can be closed using the 'execute' command (0x02) or hardware reset. Rather than using the former option for successful firmware update procedures and reserving the latter for recovering the device upon failure, simply use hardware reset for all cases. The post-bootloader initialization delay increases marginally when triggered by a hardware reset, so increase the wait time to ensure the device does not subsequently fail to respond. As part of this change, refactor the return path to avoid an extra assignment and to make the logic a bit smaller. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210313191236.4366-6-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: iqs5xx - remove superfluous revision validationJeff LaBundy1-32/+8
The vendor-assigned firmware project number is restricted to the generic project number (15); however the vendor may assign other project numbers to specific applications and customers. These custom project numbers may be based on forwards-compatible firmware revision 1.x. However, the driver unnecessarily rejects anything older than firmware revision 2.0. To support other applications, remove these unnecessarily strict checks and enter the bootloader only for truly incompatible A000 devices. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210313191236.4366-5-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: iqs5xx - expose firmware revision to user spaceJeff LaBundy1-16/+40
Add the read-only 'fw_info' attribute which reports information about the device's firmware in the following format: a.b.c.d:e.f Where: a = Product number (e.g. 40 for IQS550) b = Project number (e.g. 15) c = Firmware revision (major) d = Firmware revision (minor) e = Customer-assigned exported file version (major) f = Customer-assigned exported file version (minor) As part of the corresponding rework to uses of 'bl_status', the IQS5XX_BL_STATUS_RESET definition is dropped with 0 used in its place instead. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210313191236.4366-4-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: iqs5xx - optimize axis definition and validationJeff LaBundy1-16/+14
Set the maximum ABS_MT_PRESSURE value and use the existing U16_MAX definition instead of a magic number to validate ABS_MT_POSITION_X and ABS_MT_POSITION_Y. Also use input_set_abs_params() rather than input_abs_set_max() to avoid having to call input_set_capability() separately. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210313191236.4366-3-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: iqs5xx - update vendor's URLJeff LaBundy1-1/+1
Replace 'http' with 'https' and correct the spelling of the nearby word 'datasheet'. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210313191236.4366-2-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: silead - fix a typoBhaskar Chowdhury1-1/+1
s/subsytem/subsystem/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210322022030.3857089-1-unixbhaskar@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-22input: raspberrypi-ts: Release firmware handle when not neededNicolas Saenz Julienne1-1/+1
There is no use for the firmware interface after getting the touch buffer address, so release it. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2021-03-21Input: atmel_mxt_ts - support wakeup methodsDmitry Osipenko1-0/+78
According to datasheets, chips like mXT1386 have a WAKE line, it is used to wake the chip up from deep sleep mode before communicating with it via the I2C-compatible interface. If the WAKE line is connected to a GPIO line, the line must be asserted 25 ms before the host attempts to communicate with the controller. If the WAKE line is connected to the SCL pin, the controller will send a NACK on the first attempt to address it, the host must then retry 25 ms later. Implement the wake-up methods in the driver. Touchscreen now works properly on devices like Acer A500 tablet, fixing problems like this: atmel_mxt_ts 0-004c: __mxt_read_reg: i2c transfer failed (-121) atmel_mxt_ts 0-004c: mxt_bootloader_read: i2c recv failed (-121) atmel_mxt_ts 0-004c: Trying alternate bootloader address atmel_mxt_ts 0-004c: mxt_bootloader_read: i2c recv failed (-121) atmel_mxt_ts: probe of 0-004c failed with error -121 Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210302102158.10533-3-digetx@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-21Input: lpc32xx_ts - convert to use BIT()edison.jiang1-5/+5
There is error from cppcheck tool. "Shifting signed 32-bit value by 31 bits is undefined behaviour errors" Signed-off-by: edison.jiang <jiangzhipeng@yulong.com> Link: https://lore.kernel.org/r/20210316153150.1207-1-jzp0409@163.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-16Input: tsc2007 - make use of device propertiesAndy Shevchenko1-32/+17
Device property API allows to gather device resources from different sources, such as ACPI. Convert the drivers to unleash the power of device property API. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210314210951.645783-2-andy.shevchenko@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-16Input: tsc2007 - convert to GPIO descriptorsAndy Shevchenko2-8/+11
This converts the driver to use GPIO descriptors. Note that it now uses logical polarity and thus nagation has been dropped. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210314210951.645783-1-andy.shevchenko@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-08Input: exc3000 - add type sysfs attributeLucas Stach1-0/+17
Add a sysfs attribute to query the type of the touchscreen device. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20210125182527.1225245-5-l.stach@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-08Input: exc3000 - fix firmware version query for device in bootloaderLucas Stach1-0/+14
If the device is stuck in bootloader (maybe due to blank or corrupted application firmware) it won't answer a query for the firmware version. Fall back to returning the bootloader version in that case. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20210125182527.1225245-4-l.stach@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-08Input: exc3000 - factor out vendor data requestLucas Stach1-68/+54
Factor out the vendor data i2c request handling to make it reusable for other functions. Also don't cache the model and firmware version string in the device private data as we never use the cached version, but always read from the device. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20210125182527.1225245-3-l.stach@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-08Input: exc3000 - split MT event handling from IRQ handlerLucas Stach1-53/+61
Split out the multitouch event handling into its own function to allow other events to be handled in the IRQ handler without disturbing the MT handling. Now that things are separated a bit more, stop treating vendor data requests special by cehcking for a locked mutex, but just look at the event ID to figure out if the message is a MT report or a vendor data query reply. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20210125182527.1225245-2-l.stach@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-08Input: s6sy761 - fix coordinate read bit shiftCaleb Connolly1-2/+2
The touch coordinate register contains the following: byte 3 byte 2 byte 1 +--------+--------+ +-----------------+ +-----------------+ | | | | | | | | X[3:0] | Y[3:0] | | Y[11:4] | | X[11:4] | | | | | | | | +--------+--------+ +-----------------+ +-----------------+ Bytes 2 and 1 need to be shifted left by 4 bits, the least significant nibble of each is stored in byte 3. Currently they are only being shifted by 3 causing the reported coordinates to be incorrect. This matches downstream examples, and has been confirmed on my device (OnePlus 7 Pro). Fixes: 0145a7141e59 ("Input: add support for the Samsung S6SY761 touchscreen") Signed-off-by: Caleb Connolly <caleb@connolly.tech> Reviewed-by: Andi Shyti <andi@etezian.org> Link: https://lore.kernel.org/r/20210305185710.225168-1-caleb@connolly.tech Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-24Merge branch 'for-linus' of ↵Linus Torvalds13-331/+442
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Mostly existing driver fixes plus a new driver for game controllers directly connected to Nintendo 64, and an enhancement for keyboards driven by Chrome OS EC to communicate layout of the top row to userspace" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (47 commits) Input: st1232 - fix NORMAL vs. IDLE state handling Input: aiptek - convert sysfs sprintf/snprintf family to sysfs_emit Input: alps - fix spelling of "positive" ARM: dts: cros-ec-keyboard: Use keymap macros dt-bindings: input: Fix the keymap for LOCK key dt-bindings: input: Create macros for cros-ec keymap Input: cros-ec-keyb - expose function row physical map to userspace dt-bindings: input: cros-ec-keyb: Add a new property describing top row Input: applespi - fix occasional crc errors under load. Input: applespi - don't wait for responses to commands indefinitely. Input: st1232 - add IDLE state as ready condition Input: zinitix - fix return type of zinitix_init_touch() Input: i8042 - add ASUS Zenbook Flip to noselftest list Input: add missing dependencies on CONFIG_HAS_IOMEM Input: joydev - prevent potential read overflow in ioctl Input: elo - fix an error code in elo_connect() Input: xpad - add support for PowerA Enhanced Wired Controller for Xbox Series X|S Input: sur40 - fix an error code in sur40_probe() Input: elants_i2c - detect enum overflow Input: zinitix - remove unneeded semicolon ...
2021-02-23Input: st1232 - fix NORMAL vs. IDLE state handlingGeert Uytterhoeven1-2/+7
NORMAL (0x0) and IDLE (0x4) are really two different states. Hence you cannot check for both using a bitmask, as that checks for IDLE only, breaking operation for devices that are in NORMAL state. Fix the wait function to report either state as ready. Fixes: 6524d8eac258452e ("Input: st1232 - add IDLE state as ready condition") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Michael Tretter <m.tretter@pengutronix.de> Link: https://lore.kernel.org/r/20210223090201.1430542-1-geert+renesas@glider.be Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-23Merge branch 'next' into for-linusDmitry Torokhov13-332/+472
Prepare input updates for 5.12 merge window.
2021-02-23Merge tag 'v5.11' into nextDmitry Torokhov8-56/+203
Merge with mainline to get latest APIs and device tree bindings.
2021-02-19Input: st1232 - add IDLE state as ready conditionMichael Tretter1-1/+1
The st1232 can switch from NORMAL to IDLE state after the configured idle time (by default 8 s). If the st1232 is not reset during probe, it might already be ready but in IDLE state. Since it does not enter NORMAL state in this case, probe fails. Fix the wait function to report the IDLE state as ready, too. Fixes: f605be6a57b4 ("Input: st1232 - wait until device is ready before reading resolution") Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Link: https://lore.kernel.org/r/20210219110556.1858969-1-m.tretter@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-19Input: zinitix - fix return type of zinitix_init_touch()Dmitry Torokhov1-1/+1
zinitix_init_touch() returns error code or 0 for success and therefore return type must be int, not bool. Fixes: 26822652c85e ("Input: add zinitix touchscreen driver") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/YC8z2bXc3Oy8pABa@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-19Input: add missing dependencies on CONFIG_HAS_IOMEMDmitry Torokhov1-1/+1
devm_ioremap_resource() is only guaranteed to be present if CONFIG_HAS_IOMEM is set. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/YCyauGyqxut69JNz@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-19Input: elo - fix an error code in elo_connect()Dan Carpenter1-1/+3
If elo_setup_10() fails then this should return an error code instead of success. Fixes: fae3006e4b42 ("Input: elo - add support for non-pressure-sensitive touchscreens") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YBKFd5CvDu+jVmfW@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-17Merge tag 'asoc-v5.12' of ↵Takashi Iwai3-13/+63
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.12 Another quiet release in terms of features, though several of the drivers got quite a bit of work and there were a lot of general changes resulting from Morimoto-san's ongoing cleanup work. - As ever, lots of hard work by Morimoto-san cleaning up the code and making it more consistent. - Many improvements in the Intel drivers including a wide range of quirks and bug fixes. - A KUnit testsuite for the topology code. - Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro - Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-06 10:24:04 +0300