summaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen
AgeCommit message (Collapse)AuthorFilesLines
2021-11-18Input: st1232 - increase "wait ready" timeoutJohn Keeping1-1/+1
[ Upstream commit 2667f6b7af99e81958fa97c03bb519fcb09d0055 ] I have a ST1633 touch controller which fails to probe due to a timeout waiting for the controller to become ready. Increasing the minimum delay to 100ms ensures that the probe sequence completes successfully. The ST1633 datasheet says nothing about the maximum delay here and the ST1232 I2C protocol document says "wait until" with no notion of a timeout. Since this only runs once during probe, being generous with the timout seems reasonable and most likely the device will become ready eventually. (It may be worth noting that I saw this issue with a PREEMPT_RT patched kernel which probably has tighter wakeups from usleep_range() than other preemption models.) Fixes: f605be6a57b4 ("Input: st1232 - wait until device is ready before reading resolution") Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210929152609.2421483-1-john@metanate.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-18Merge branch 'for-linus' of ↵Linus Torvalds1-13/+16
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a new product ID for the xpad joystick driver - fixes to resistive-adc-touch and snvs_pwrkey drivers - a change to touchscreen helpers to make clang happier * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: touchscreen - avoid bitwise vs logical OR warning Input: xpad - add support for another USB ID of Nacon GC-100 Input: resistive-adc-touch - fix division by zero error on z1 == 0 Input: snvs_pwrkey - add clk handling
2021-10-16Input: resistive-adc-touch - fix division by zero error on z1 == 0Oleksij Rempel1-13/+16
For proper pressure calculation we need at least x and z1 to be non zero. Even worse, in case z1 we may run in to division by zero error. Fixes: 60b7db914ddd ("Input: resistive-adc-touch - rework mapping of channels") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20211007095727.29579-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-11Merge branch 'for-linus' of ↵Linus Torvalds3-5/+13
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - several device tree bindings for input devices have been converted to yaml - dropped no longer used ixp4xx-beeper and CSR Prima2 PWRC drivers - analog joystick has been converted to use ktime API and no longer warn about low resolution timers - a few driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits) Input: analog - always use ktime functions Input: mms114 - support MMS134S Input: elan_i2c - reduce the resume time for controller in Whitebox Input: edt-ft5x06 - added case for EDT EP0110M09 Input: adc-keys - drop bogus __refdata annotation Input: Fix spelling mistake in Kconfig "useable" -> "usable" Input: Fix spelling mistake in Kconfig "Modul" -> "Module" Input: remove dead CSR Prima2 PWRC driver Input: adp5589-keys - use the right header Input: adp5588-keys - use the right header dt-bindings: input: tsc2005: Convert to YAML schema Input: ep93xx_keypad - prepare clock before using it dt-bindings: input: sun4i-lradc: Add wakeup-source dt-bindings: input: Convert Regulator Haptic binding to a schema dt-bindings: input: Convert Pixcir Touchscreen binding to a schema dt-bindings: input: Convert ChipOne ICN8318 binding to a schema Input: pm8941-pwrkey - fix comma vs semicolon issue dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml dt-bindings: power: reset: Change 'additionalProperties' to true ...
2021-09-07Input: mms114 - support MMS134SLinus Walleij1-4/+11
The MMS134S like the MMS136 has an event size of 6 bytes. After this patch, the touchscreen on the Samsung SGH-I407 works fine with PostmarketOS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210706235951.189289-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-06Input: edt-ft5x06 - added case for EDT EP0110M09Oliver Graute1-0/+1
Add Support for EP011M09 Firmware Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20210813062110.13950-1-oliver.graute@kococonnector.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-09-06Merge branch 'next' into for-linusDmitry Torokhov2-2/+2
Prepare input updates for 5.15 merge window.
2021-09-04Input: Fix spelling mistake in Kconfig "Modul" -> "Module"Colin Ian King1-1/+1
There is a spelling mistake in the Kconfig text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210704095702.37567-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-07-19Merge tag 'v5.13' into nextDmitry Torokhov2-2/+2
Sync up with the mainline to get the latest parport API.
2021-07-05Merge branch 'for-linus' of ↵Linus Torvalds11-152/+293
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for SparkFun Qwiic Joystick - pm8941-pwrkey driver now supports PMK8350 - a bunch of assorted driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits) Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctl Input: hideep - fix the uninitialized use in hideep_nvm_unlock() Input: trackpoint - use kobj_to_dev() Input: atkbd - use kobj_to_dev() Input: tsc200x-core - use kobj_to_dev() Input: ims-pcu - use kobj_to_dev() Input: cros_ec_keyb - use kobj_to_dev() API dt-bindings: input: touchscreen: st1232: Convert to json-schema Input: i8042 - fix typos in comments Input: add SparkFun Qwiic Joystick driver dt-bindings: Add vendor prefix and bindings for Qwiic Joystick Input: cy8ctmg110_ts - switch to using gpiod API Input: cy8ctmg110_ts - switch to using managed resources Input: cy8ctmg110_ts - use endian helpers when converting data on wire Input: cy8ctmg110_ts - let I2C core configure wake interrupt Input: cy8ctmg110_ts - do not hardcode as wakeup source Input: cy8ctmg110_ts - do not hard code interrupt trigger Input: cy8ctmg110_ts - rely on platform code to supply interrupt Input: resistive-adc-touch - fix uninitialized variable 'press' Input: pm8941-pwrkey - add support for PMK8350 PON_HLOS PMIC peripheral ...
2021-07-05Merge branch 'next' into for-linusDmitry Torokhov9-142/+284
Prepare input updates for 5.14 merge window.
2021-06-20Input: hideep - fix the uninitialized use in hideep_nvm_unlock()Yizhuo Zhai1-3/+10
Inside function hideep_nvm_unlock(), variable "unmask_code" could be uninitialized if hideep_pgm_r_reg() returns error, however, it is used in the later if statement after an "and" operation, which is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@ucr.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-20Input: tsc200x-core - use kobj_to_dev()YueHaibing1-1/+1
Use kobj_to_dev() instead of container_of() Generated by: scripts/coccinelle/api/kobj_to_dev.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20210607122451.36708-1-yuehaibing@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-06Input: cy8ctmg110_ts - switch to using gpiod APIDmitry Torokhov1-27/+18
Instead of legacy gpio API let's use newer gpiod API. This also allows us to get rid of platform data. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210603043726.3793876-7-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-06Input: cy8ctmg110_ts - switch to using managed resourcesDmitry Torokhov1-46/+28
This simplifies error handling paths and allows to get rid of cy8ctmg110_remove() method. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210603043726.3793876-6-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-06Input: cy8ctmg110_ts - use endian helpers when converting data on wireDmitry Torokhov1-6/+5
Switch to using be16_to_cpup() instead of shifting and combining data by hand. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210603043726.3793876-5-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-06Input: cy8ctmg110_ts - let I2C core configure wake interruptDmitry Torokhov1-6/+4
I2C core already configures interrupt as wakeup source when device is registered using I2C_CLIENT_WAKE flag, so let's rely on it instead of configuring it ourselves. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210603043726.3793876-4-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-06Input: cy8ctmg110_ts - do not hardcode as wakeup sourceDmitry Torokhov1-1/+1
Let platform specify whether the controller should be a wakeup source by registering as I2C_CLIENT_WAKE. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210603043726.3793876-3-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-06Input: cy8ctmg110_ts - do not hard code interrupt triggerDmitry Torokhov1-2/+1
Rely on the platform to set up interrupt polarity/type properly instead of hard-coding falling edge. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210603043726.3793876-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-06Input: cy8ctmg110_ts - rely on platform code to supply interruptDmitry Torokhov1-31/+1
Instead of using platform data to specify GPIO that is used as interrupt source, rely on the platform and I2C core to set it up properly. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210603043726.3793876-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-06Input: resistive-adc-touch - fix uninitialized variable 'press'Colin Ian King1-3/+1
In the case where st->ch_map[GRTS_CH_PRESSURE] < GRTS_MAX_CHANNELS is false and also st->ch_map[GRTS_CH_Z1] < GRTS_MAX_CHANNELS is false the variable press is not initialized and contains garbage. In this situation st->pressure is also false, so we do not actually use press value, but it is impossible for the compiler to realize this, and it emits "uninitialized variable" warning. Fix this by initializing press to 0 and allows us to also remove an else clause that sets press to 0. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 60b7db914ddd ("Input: resistive-adc-touch - rework mapping of channels") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210603220809.155118-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-02Input: edt-ft5x06 - add support for iovcc-supplyStephan Gerhold1-2/+36
At the moment, the edt-ft5x06 driver can control a single regulator ("vcc"). However, some FocalTech touch controllers have an additional IOVCC pin that should be supplied with the digital I/O voltage. The I/O voltage might be provided by another regulator that should also be kept on. Otherwise, the touchscreen can randomly stop functioning if the regulator is turned off because no other components still require it. Implement (optional) support for also enabling an "iovcc-supply". The datasheet specifies a delay of ~ 10us before enabling VDD/VCC after IOVCC is enabled, so make sure to enable IOVCC first. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210510193108.50178-2-stephan@gerhold.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-02Input: cyttsp - remove public headerDmitry Torokhov4-2/+12
There is nothing in include/linux/input/cyttsp.h that might be of interes to the kernel at large, so let's move this information into the driver code and remove the header. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210531052307.1433979-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-02Input: resistive-adc-touch - rework mapping of channelsDmitry Torokhov1-63/+51
Instead of iterating over channels establish and use channel map to retrieve data. As a side effect this will silence "uninitialized variable" warnings. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/YLXR2brkc4H54xtK@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-01Input: resistive-adc-touch - replace OF headers with proper onesAndy Shevchenko1-3/+3
The driver is actually OF independent and doesn't need anything from OF (*). Replace OF headers with mod_devicetable.h and property.h. *) use of of_match_ptr() is actually wrong here, since it may provoke a compiler to warn about unused variable. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210528151113.85943-2-andriy.shevchenko@linux.intel.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-01Input: resistive-adc-touch - describe parameters in kernel docAndy Shevchenko1-1/+3
Validation script is not happy: resistive-adc-touch.c:53: warning: Function parameter or member 'x_plate_ohms' not described in 'grts_state' resistive-adc-touch.c:53: warning: Function parameter or member 'ch' not described in 'grts_state' Describe parameters in kernel doc to make it happy. Fixes: fb082cd59afa ("Input: resistive-adc-touch - add support for z1 and z2 channels") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210528151113.85943-1-andriy.shevchenko@linux.intel.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-31Input: cyttsp - do not force interrupt triggerDmitry Torokhov1-2/+1
Instead of forcing interrupt trigger to be "falling edge" let's rely on the platform to set it up according to how it is set up on a given board based on data in device tree or ACPI tables. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/YK7iO96g+7yIC0l1@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-31Input: elants_i2c - switch to probe_newTakashi Iwai1-3/+2
Now that we get rid of the usage of id argument at probe again, let's switch to the new i2c probe method; this will avoid for people misusing the possibly unassigned id pointer again. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20210528071024.26450-2-tiwai@suse.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-31Input: elants_i2c - fix NULL dereference at probingTakashi Iwai1-3/+3
The recent change in elants_i2c driver to support more chips introduced a regression leading to Oops at probing. The driver reads id->driver_data, but the id may be NULL depending on the device type the driver gets bound. Replace the driver data extraction with the device_get_match_data() helper, and define the driver data in OF table, too. Fixes: 9517b95bdc46 ("Input: elants_i2c - add support for eKTF3624") BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1186454 Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210528071024.26450-1-tiwai@suse.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-27Input: cyttsp - obtain regulatorsLinus Walleij2-0/+37
The CYTTSP TMA340 chips have two supplies: VCPIN and VDD for analog and digital voltage respectively. Add some minimal code to obtain and enable these regulators if need be. Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210526230352.1433537-3-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-27Input: cyttsp - probe from compatiblesLinus Walleij2-0/+16
The driver (both SPI and I2C interface) should probe from the compatible strings, cypress,cy8ctma340 etc when using device tree, not as now, where it is probing implicitly from the I2C/SPI node name "cypress,cyttsp-i2c" etc. Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210526230352.1433537-2-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-25Input: resistive-adc-touch - add support for z1 and z2 channelsOleksij Rempel1-14/+126
This patch adds support for the z1 and z2 channels. These are used to calculate the applied pressure. As there is no common order of the individual channels of a resistive touch ADC, support for io-channel-names is added (although the DT bindings stated the driver already supports these). Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20210525054634.9134-5-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-25Merge tag 'v5.12' into nextDmitry Torokhov2-5/+4
Sync up with mainline to get the latest device tree bindings and kernel APIs.
2021-05-25Input: usbtouchscreen - fix control-request directionsJohan Hovold1-4/+4
The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the four control requests which erroneously used usb_rcvctrlpipe(). Fixes: 1d3e20236d7a ("[PATCH] USB: usbtouchscreen: unified USB touchscreen driver") Fixes: 24ced062a296 ("usbtouchscreen: add support for DMC TSC-10/25 devices") Fixes: 9e3b25837a20 ("Input: usbtouchscreen - add support for e2i touchscreen controller") Signed-off-by: Johan Hovold <johan@kernel.org> Cc: stable@vger.kernel.org # 2.6.17 Link: https://lore.kernel.org/r/20210524092048.4443-1-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-20Input: goodix - platform/x86: touchscreen_dmi - Move upside down quirks to ↵Hans de Goede1-52/+0
touchscreen_dmi.c Move the DMI quirks for upside-down mounted Goodix touchscreens from drivers/input/touchscreen/goodix.c to drivers/platform/x86/touchscreen_dmi.c, where all the other x86 touchscreen quirks live. Note the touchscreen_dmi.c code attaches standard touchscreen device-properties to an i2c-client device based on a combination of a DMI match + a device-name match. I've verified that the: Teclast X98 Pro, WinBook TW100 and WinBook TW700 uses an ACPI devicename of "GDIX1001:00" based on acpidumps and/or dmesg output available on the web. This patch was tested on a Teclast X89 tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210504185746.175461-2-hdegoede@redhat.com
2021-05-07Merge branch 'for-linus' of ↵Linus Torvalds25-543/+2143
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - three new touchscreen drivers: Hycon HY46XX, ILITEK Lego Series, and MStar MSG2638 - a new driver for Azoteq IQS626A proximity and touch controller - addition of Amazon Game Controller to the list of devices handled by the xpad driver - Elan touchscreen driver will avoid binding to devices described as I2CHID compatible in ACPI tables - various driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (56 commits) Input: xpad - add support for Amazon Game Controller Input: ili210x - add missing negation for touch indication on ili210x MAINTAINERS: repair reference in HYCON HY46XX TOUCHSCREEN SUPPORT Input: add driver for the Hycon HY46XX touchpanel series dt-bindings: touchscreen: Add HY46XX bindings dt-bindings: Add Hycon Technology vendor prefix Input: cyttsp - flag the device properly Input: cyttsp - set abs params for ABS_MT_TOUCH_MAJOR Input: cyttsp - drop the phys path Input: cyttsp - reduce reset pulse timings Input: cyttsp - error message on boot mode exit error Input: apbps2 - remove useless variable Input: mms114 - support MMS136 Input: mms114 - convert bindings to YAML and extend Input: Add support for ILITEK Lego Series dt-bindings: input: touchscreen: ilitek_ts_i2c: Add bindings Input: add MStar MSG2638 touchscreen driver dt-bindings: input/touchscreen: add bindings for msg2638 Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated devices ...
2021-05-07Input: ili210x - add missing negation for touch indication on ili210xHansem Ro1-1/+1
This adds the negation needed for proper finger detection on Ilitek ili2107/ili210x. This fixes polling issues (on Amazon Kindle Fire) caused by returning false for the cooresponding finger on the touchscreen. Signed-off-by: Hansem Ro <hansemro@outlook.com> Fixes: e3559442afd2a ("ili210x - rework the touchscreen sample processing") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-04Merge branch 'next' into for-linusDmitry Torokhov25-545/+2143
Prepare input updates for 5.13 merge window.
2021-04-26Merge tag 'arm-drivers-5.13' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: TEE/OP-TEE: - Add tracepoints around calls to secure world Memory controller drivers: - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms - Add debug statistics to Tegra20 memory controller - Update Tegra bindings and convert to dtschema ARM SCMI Firmware: - Support for modular SCMI protocols and vendor specific extensions - New SCMI IIO driver - Per-cpu DVFS The other driver changes are all from the platform maintainers directly and reflect the drivers that don't fit into any other subsystem as well as treewide changes for a particular platform. SoCFPGA: - Various cleanups contributed by Krzysztof Kozlowski Mediatek: - add MT8183 support to mutex driver - MMSYS: use per SoC array to describe the possible routing - add MMSYS support for MT8183 and MT8167 - add support for PMIC wrapper with integrated arbiter - add support for MT8192/MT6873 Tegra: - Bug fixes to PMC and clock drivers NXP/i.MX: - Update SCU power domain driver to keep console domain power on. - Add missing ADC1 power domain to SCU power domain driver. - Update comments for single global power domain in SCU power domain driver. - Add i.MX51/i.MX53 unique id support to i.MX SoC driver. NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers OMAP: - Preparation to use devicetree for genpd - ti-sysc needs iorange check improved when the interconnect target module has no control registers listed - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid issues with missing resources and unnecessary deferred probe - ti-sysc debug option can now detect more devices - ti-sysc now warns if an old incomplete devicetree data is found as we now rely on it being complete for am3 and 4 - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7 - omap-prm driver needs to enable autoidle retention support for omap4 - omap5 clocks are missing gpmc and ocmc clock registers - pci-dra7xx now needs to use builtin_platform_driver instead of using builtin_platform_driver_probe for deferred probe to work Raspberry Pi: - Fix-up all RPi firmware drivers so as for unbind to happen in an orderly fashion - Support for RPi's PoE hat PWM bus Qualcomm - Improved detection for SCM calling conventions - Support for OEM specific wifi firmware path - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP" * tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: aspeed: fix a ternary sign expansion bug memory: mtk-smi: Add device-link between smi-larb and smi-common memory: samsung: exynos5422-dmc: handle clk_set_parent() failure memory: renesas-rpc-if: fix possible NULL pointer dereference of resource clk: socfpga: fix iomem pointer cast on 64-bit soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning soc: fsl: enable acpi support in RCPM driver soc: qcom: mdt_loader: Detect truncated read of segments soc: qcom: mdt_loader: Validate that p_filesz < p_memsz soc: qcom: pdr: Fix error return code in pdr_register_listener firmware: qcom_scm: Fix kernel-doc function names to match firmware: qcom_scm: Suppress sysfs bind attributes firmware: qcom_scm: Workaround lack of "is available" call on SC7180 firmware: qcom_scm: Reduce locking section for __get_convention() firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers" ...
2021-04-15Merge branch 'for-linus' of ↵Linus Torvalds2-5/+4
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a few driver fixes here" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elants_i2c - drop zero-checking of ABS_MT_TOUCH_MAJOR resolution Input: elants_i2c - fix division by zero if firmware reports zero phys size Input: nspire-keypad - enable interrupts only when opened Input: i8042 - fix Pegatron C15B ID entry Input: n64joy - fix return value check in n64joy_probe() Input: s6sy761 - fix coordinate read bit shift
2021-04-14Input: add driver for the Hycon HY46XX touchpanel seriesGiulio Benetti3-0/+603
This patch adds support for Hycon HY46XX. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Link: https://lore.kernel.org/r/20210413144446.2277817-4-giulio.benetti@benettiengineering.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: cyttsp - flag the device properlyLinus Walleij1-1/+1
This device is certainly a very simple touchscreen so we set INPUT_MT_DIRECT. Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210408131153.3446138-9-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: cyttsp - set abs params for ABS_MT_TOUCH_MAJORLinus Walleij1-0/+3
The driver is certainly reporting pressure in cyttsp_report_tchdata() with input_report_abs(input, ABS_MT_TOUCH_MAJOR, tch->z); so we should also advertise this capability. Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210408131153.3446138-8-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: cyttsp - drop the phys pathLinus Walleij2-3/+0
When I test to use the CY8CTMA340 with PostmarketOS I don't have any problem whatsoever in dropping this phys path, it finds and uses the touchscreen just as well. I suppose it is because userspace is using modern input libraries. I challenge the maintainers to point out a valid and still used userspace that actually need this. I say we drop it. Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210408131153.3446138-7-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: cyttsp - reduce reset pulse timingsLinus Walleij1-2/+8
The data sheet for CY8CTMA340 specifies that the reset pulse shall be at least 1 ms. Specify 1-2 ms with usleep_range() to cut some slack for the scheduler. Curiously the datasheet does not specify how long we have to wait after a hard reset until the chip is up, but I have found a vendor tree (Samsung GT-S7710) that has code for this touch screen and there this is set to 5 ms so I use this with the same 1 ms fuzz. Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210408131153.3446138-6-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: cyttsp - error message on boot mode exit errorLinus Walleij1-1/+3
Provide a proper error message when attempting to exit boot loader mode and failing, which is something that happened to me. Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210408131153.3446138-5-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: mms114 - support MMS136Linus Walleij1-6/+16
The Melfas MMS136 is similar to the other MMS variants but has event packages of 6 bytes rather than 8 as the others. The define is named FINGER_EVENT_SZ in the vendor drivers so I renamed it from MMS*_PACKET_SZ to MMS*_EVENT_SZ. After this patch, the touchscreen on the Samsung GT-I8530 works fine with PostmarketOS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210404232619.3092682-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: Add support for ILITEK Lego SeriesJoe Hung3-0/+703
Add support for ILITEK Lego series of touch devices. Lego series includes ILITEK 213X/23XX/25XX. Tested/passed with evaluation board with ILI2520/2322 IC. Signed-off-by: Joe Hung <joe_hung@ilitek.com> Link: https://lore.kernel.org/r/20210324122601.125873-2-joe_hung@ilitek.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: add MStar MSG2638 touchscreen driverVincent Knecht3-0/+350
Add support for the msg2638 touchscreen IC from MStar. Firmware handling, wakeup gestures and other specialties are not supported. This driver reuses zinitix.c structure, while the checksum and irq handler functions are based on out-of-tree driver for Alcatel Idol 3 (4.7"). Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210305153815.126937-2-vincent.knecht@mailoo.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: silead - add workaround for x86 BIOS-es which bring the chip up in a ↵Hans de Goede1-4/+40
stuck state Some buggy BIOS-es bring up the touchscreen-controller in a stuck state where it blocks the I2C bus. Specifically this happens on the Jumper EZpad 7 tablet model. After much poking at this problem I have found that the following steps are necessary to unstuck the chip / bus: 1. Turn off the Silead chip. 2. Try to do an I2C transfer with the chip, this will fail in response to which the I2C-bus-driver will call: i2c_recover_bus() which will unstuck the I2C-bus. Note the unstuck-ing of the I2C bus only works if we first drop the chip of the bus by turning it off. 3. Turn the chip back on. On the x86/ACPI systems were this problem is seen, step 1. and 3. require making ACPI calls and dealing with ACPI Power Resources. This commit adds a workaround which runtime-suspends the chip to turn it off, leaving it up to the ACPI subsystem to deal with all the ACPI specific details. There is no good way to detect this bug, so the workaround gets activated by a new "silead,stuck-controller-bug" boolean device-property. Since this is only used on x86/ACPI, this will be set by model specific device-props set by drivers/platform/x86/touchscreen_dmi.c. Therefor this new device-property is not documented in the DT-bindings. Dmesg will contain the following messages on systems where the workaround is activated: [ 54.309029] silead_ts i2c-MSSL1680:00: [Firmware Bug]: Stuck I2C bus: please ignore the next 'controller timed out' error [ 55.373593] i2c_designware 808622C1:04: controller timed out [ 55.582186] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210405202745.16777-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-09 22:49:17 +0300