summaryrefslogtreecommitdiff
path: root/drivers/input/misc
AgeCommit message (Collapse)AuthorFilesLines
2022-12-31Input: iqs7222 - add support for IQS7222A v1.13+Jeff LaBundy1-0/+111
[ Upstream commit 8d4c313c03f104c69e25ab03058d8955be9dc387 ] IQS7222A revisions 1.13 and later widen the gesture multiplier from x4 ms to x16 ms. Add a means to scale the gesture timings specified in the device tree based on the revision of the device. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/Y1SRdbK1Dp2q7O8o@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31Input: iqs7222 - report malformed propertiesJeff LaBundy1-8/+36
[ Upstream commit 404f3b48e65f058d94429e4a1ec16a1f82ff3b2f ] Nonzero return values of several calls to fwnode_property_read_u32() are silently ignored, leaving no way to know the properties were not applied in the event of an error. Solve this problem by evaluating fwnode_property_read_u32()'s return value, and reporting an error for any nonzero return value not equal to -EINVAL which indicates the property was absent altogether. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/Y1SRRrpQXvkETjfm@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31Input: iqs7222 - drop unused device node referencesJeff LaBundy1-194/+146
[ Upstream commit bbd16b0d839978e8c8bec2b9a162373f64fc2fbb ] Each call to device/fwnode_get_named_child_node() must be matched with a call to fwnode_handle_put() once the corresponding node is no longer in use. This ensures a reference count remains balanced in the case of dynamic device tree support. Currently, the driver never calls fwnode_handle_put(). Solve this problem by moving the node handling from iqs7222_parse_props() to the new iqs7222_parse_reg_grp(), leaving the former to do nothing but parse properties. The latter then manages the reference count in a single location and consistent fashion. This change drastically simplifies iqs7222_parse_all(), which can then call iqs7222_parse_reg_grp() on every register group without having to treat each register group differently. For nested event nodes, common parsing code has been factored out to the new iqs7222_parse_event() so as to allow the event node to be dropped from as few locations as possible. As part of this refactor, the 'linux,code' property has been made optional. This enables applications that define an event with the sole purpose of enabling a GPIO. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/Y1SRJIQ3WPwNpC0K@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31Input: wistron_btns - disable on UMLRandy Dunlap1-1/+1
[ Upstream commit b2b80d9dd14cb5b70dc254bddbc4eea932694791 ] The wistron_btns driver calls rtc_cmos_read(), which isn't available with UML builds, so disable this driver on UML. Prevents this build error: ld: drivers/input/misc/wistron_btns.o: in function `poll_bios': wistron_btns.c:(.text+0x4be): undefined reference to `rtc_cmos_read' Fixes: 0bbadafdc49d ("um: allow disabling NO_IOMEM") # v5.14+ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20221130161604.1879-1-rdunlap@infradead.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31Input: iqs7222 - protect against undefined slider sizeJeff LaBundy1-1/+8
[ Upstream commit 2f6fd232978906f6fb054529210b9faec384bd45 ] Select variants of silicon do not define a default slider size, in which case the size must be specified in the device tree. If it is not, the axis's maximum value is reported as 65535 due to unsigned integer overflow. To solve this problem, move the existing zero-check outside of the conditional block that checks whether the property is present. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/Y1SRXEi7XMlncDWk@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-07Input: soc_button_array - add Acer Switch V 10 to dmi_use_low_level_irq[]Hans de Goede1-0/+7
Like on the Acer Switch 10 SW5-012, the Acer Switch V 10 SW5-017's _LID method messes with home- and power-button GPIO IRQ settings, causing an IRQ storm. Add a quirk entry for the Acer Switch V 10 to the dmi_use_low_level_irq[] DMI quirk list, to use low-level IRQs on this model, fixing the IRQ storm. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20221106215320.67109-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-11-07Input: soc_button_array - add use_low_level_irq module parameterHans de Goede1-1/+6
It seems that the Windows drivers for the ACPI0011 soc_button_array device use low level triggered IRQs rather then using edge triggering. Some ACPI tables depend on this, directly poking the GPIO controller's registers to clear the trigger type when closing a laptop's/2-in-1's lid and re-instating the trigger when opening the lid again. Linux sets the edge/level on which to trigger to both low+high since it is using edge type IRQs, the ACPI tables then ends up also setting the bit for level IRQs and since both low and high level have been selected by Linux we get an IRQ storm leading to soft lockups. As a workaround for this the soc_button_array already contains a DMI quirk table with device models known to have this issue. Add a module parameter for this so that users can easily test if their device is affected too and so that they can use the module parameter as a workaround. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20221106215320.67109-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-10-10Merge branch 'next' into for-linusDmitry Torokhov16-56/+373
Prepare input updates for 6.1 merge window.
2022-09-29Input: ims-pcu - fix spelling mistake "BOOLTLOADER" -> "BOOTLOADER"Colin Ian King1-1/+1
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220928211003.61872-1-colin.i.king@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-09-28Input: ibm-panel - add missing MODULE_DEVICE_TABLEZeng Heng1-0/+1
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Signed-off-by: Zeng Heng <zengheng4@huawei.com> Link: https://lore.kernel.org/r/20220928143133.1809491-1-zengheng4@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-09-27Input: twl4030-pwrbutton - add missing of.h includeDmitry Torokhov1-0/+1
The driver is using of_match_ptr() and therefore needs to include of.h header. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220927052217.2784593-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-09-25Input: twl4030-vibra - drop legacy, non DT boot supportPeter Ujfalusi1-9/+4
Legacy or non DT boot is no longer possible on systems where the tw4030/5030 is used. Drop the support for handling legacy pdata. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20220616153323.29464-1-peter.ujfalusi@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-09-14Input: iqs7222 - set all ULP entry masks by defaultJeff LaBundy1-5/+6
Some devices expose an ultra-low-power (ULP) mode entry mask for each channel. If the mask is set, the device cannot enter ULP so long as the corresponding channel remains in an active state. The vendor has advised setting the mask for any disabled channel. To accommodate this suggestion, initially set all masks and then clear them only if specified in the device tree. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220908131548.48120-8-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-09-14Input: iqs7222 - avoid sending empty SYN_REPORT eventsJeff LaBundy1-0/+3
Add a check to prevent sending undefined events, which ultimately map to SYN_REPORT. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220908131548.48120-7-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-09-14Input: iqs7222 - trim force communication commandJeff LaBundy1-1/+1
According to the datasheets, writing only 0xFF is sufficient to elicit a communication window. Remove the superfluous 0x00 from the force communication command. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220908131548.48120-6-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-09-01Input: rt5120 - add power key supportChiYuan Huang3-0/+130
Add RT5120 PMIC power key support. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1660100142-32493-4-git-send-email-u0084500@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-08-23Input: rk805-pwrkey - fix module autoloadingPeter Robinson1-0/+1
Add the module alias so the rk805-pwrkey driver will autoload when built as a module. Fixes: 5a35b85c2d92 ("Input: add power key driver for Rockchip RK805 PMIC") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20220612225437.3628788-1-pbrobinson@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-08-19Input: move from strlcpy with unused retval to strscpyWolfram Sang1-1/+1
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220818210022.6865-1-wsa+renesas@sang-engineering.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-08-17Input: Add IBM Operation Panel driverEddie James3-0/+218
Add a driver to get the button events from the panel and provide them to userspace with the input subsystem. The panel is connected with I2C and controls the bus, so the driver registers as an I2C slave device. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # I2C slave parts Link: https://lore.kernel.org/r/20220809204147.238132-3-eajames@linux.ibm.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-08-16i2c: Make remove callback return voidUwe Kleine-König4-12/+4
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-11Merge tag 'input-for-v5.20-rc0' of ↵Linus Torvalds1-62/+116
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - changes to input core to properly queue synthetic events (such as autorepeat) and to release multitouch contacts when an input device is inhibited or suspended - reworked quirk handling in i8042 driver that consolidates multiple DMI tables into one and adds several quirks for TUXEDO line of laptops - update to mt6779 keypad to better reflect organization of the hardware - changes to mtk-pmic-keys driver preparing it to handle more variants - facelift of adp5588-keys driver - improvements to iqs7222 driver - adjustments to various DT binding documents for input devices - other assorted driver fixes. * tag 'input-for-v5.20-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits) Input: adc-joystick - fix ordering in adc_joystick_probe() dt-bindings: input: ariel-pwrbutton: use spi-peripheral-props.yaml Input: deactivate MT slots when inhibiting or suspending devices Input: properly queue synthetic events dt-bindings: input: iqs7222: Use central 'linux,code' definition Input: i8042 - add dritek quirk for Acer Aspire One AO532 dt-bindings: input: gpio-keys: accept also interrupt-extended dt-bindings: input: gpio-keys: reference input.yaml and document properties dt-bindings: input: gpio-keys: enforce node names to match all properties dt-bindings: input: Convert adc-keys to DT schema dt-bindings: input: Centralize 'linux,input-type' definition dt-bindings: input: Use common 'linux,keycodes' definition dt-bindings: input: Centralize 'linux,code' definition dt-bindings: input: Increase maximum keycode value to 0x2ff Input: mt6779-keypad - implement row/column selection Input: mt6779-keypad - match hardware matrix organization Input: i8042 - add additional TUXEDO devices to i8042 quirk tables Input: goodix - switch use of acpi_gpio_get_*_resource() APIs Input: i8042 - add TUXEDO devices to i8042 quirk tables Input: i8042 - add debug output for quirks ...
2022-08-04Merge tag 'spdx-6.0-rc1' of ↵Linus Torvalds3-27/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ...
2022-07-08Merge tag 'v5.19-rc5' into nextDmitry Torokhov6-8/+8
Merge with mainline to bring up the latest definition from MFD subsystem needed for Mediatek keypad driver.
2022-06-28Input: iqs7222 - remove support for RF filterJeff LaBundy1-7/+0
The vendor has marked the RF filter enable control as reserved in the datasheet; remove it from the driver. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220626072412.475211-7-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-28Input: iqs7222 - handle reset during ATIJeff LaBundy1-3/+6
If the device suffers a spurious reset during ATI, there is no point in enduring any further retries. Instead, simply return successfully from the polling loop. In this case, the interrupt handler will intervene and recognize the device has been reset. It then proceeds to initialize the device and trigger ATI once more. As part of this change, swap the order of status field evaluation to match that of the interrupt handler, and correct a nearby off-by-one error that causes an error message to suggest the final attempt will be retried. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220626072412.475211-6-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-28Input: iqs7222 - acknowledge reset before writing registersJeff LaBundy1-3/+29
If the device suffers a spurious reset while reacting to a previous spurious reset, the second reset interrupt is preempted because the ACK_RESET bit is written last. To solve this problem, write the ACK_RESET bit prior to writing any other registers. This ensures that any registers written before the second spurious reset will be rewritten. Last but not least, the order in which the ACK_RESET bit is written relative to the second filter beta register is important for select variants of silicon. Enforce the correct order so as to not clobber the system status register. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220626072412.475211-5-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-28Input: iqs7222 - protect volatile registersJeff LaBundy1-4/+14
Select variants of silicon silently mirror part of the event mask register to the system setup register (0xD0), and vice versa. For the following sequence: 1. Read registers 0xD0 onward and store their contents. 2. Modify the contents, including event mask fields. 3. Write registers 0xD0 onward with the modified contents. 4. Write register 0xD0 on its own again later, using the contents from step 1 to populate any reserved fields. ...the event mask register (e.g. address 0xDA) has been corrupted by writing register 0xD0 with contents that were made stale after step 3. To solve this problem, read register 0xD0 once more between steps 3 and 4. When register 0xD0 is written during step 4, the portion which is mirrored to the event mask register already matches what was written in step 3. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220626072412.475211-4-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-28Input: iqs7222 - fortify slider event reportingJeff LaBundy1-38/+58
The release cycle of any key mapped to a slider gesture relies upon trailing interrupts generated by other unmasked sources, the timing and presence of which are inconsistent. To solve this problem, explicitly report a release cycle to emulate a full keystroke. Also, unmask touch interrupts if the slider press event is defined; this ensures the device reports a final interrupt with coordinate = 0xFFFF once the finger is lifted. As a result of how the logic has been refactored, the press/release event can now be mapped to a GPIO. This is more convenient than the previous solution, which required each channel within the slider to specify the same GPIO. As part of this change, use the device's resolution rather than its number of interrupt status registers to more safely determine if it is capable of reporting gestures. Last but not least, make the code a bit simpler by eliminating some unnecessarily complex conditional statements and a macro that could be derived using information that is already available. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220626072412.475211-3-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-28Input: iqs7222 - correct slider event disable logicJeff LaBundy1-7/+9
If a positive swipe/flick gesture is defined but the corresponding negative gesture is not, the former is inadvertently disabled. Fix this by gently refactoring the logic responsible for disabling all gestures by default. As part of this change, make the code a bit simpler by eliminating a superfluous conditional check. If a slider event does not define an enable control, the second term of the bitwise AND operation is simply 0xFFFF. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220626072412.475211-2-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULEThomas Gleixner2-18/+2
Based on the normalized pattern: this program is free software you can redistribute it and/or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed as is without any warranty of any kind whether express or implied without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_30.RULE ↵Thomas Gleixner1-9/+1
(part 2) Based on the normalized pattern: this program is free software you can redistribute it and/or modify it under the terms of the gnu general public license as published by the free software foundation version 2 this program is distributed as is without any warranty of any kind whether express or implied without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-08Merge tag 'input-for-v5.19-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - proper annotation of USB buffers in bcm5974 touchpad dirver - a quirk in SOC button driver to handle Lenovo Yoga Tablet2 1051F - a fix for missing dependency in raspberrypi-ts driver to avoid compile breakages with random configs. * tag 'input-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to dmi_use_low_level_irq Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag Input: raspberrypi-ts - add missing HAS_IOMEM dependency
2022-06-07Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to ↵Marius Hoch1-2/+2
dmi_use_low_level_irq Commit 223f61b8c5ad ("Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list") added the 1051L to this list already, but the same problem applies to the 1051F. As there are no further 1051 variants (just the F/L), we can just DMI match 1051. Tested on a Lenovo Yoga Tablet2 1051F: Without this patch the home-button stops working after a wakeup from suspend. Signed-off-by: Marius Hoch <mail@mariushoch.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220603120246.3065-1-mail@mariushoch.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-04Merge tag 'for-linus-5.19-rc1b-tag' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: "Two cleanup patches for Xen related code and (more important) an update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step down" * tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: replace xen_remap() with memremap() MAINTAINERS: Update Xen maintainership xen: switch gnttab_end_foreign_access() to take a struct page pointer
2022-06-03Merge tag 'usb-5.19-rc1' of ↵Linus Torvalds4-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver changes for 5.18-rc1. For the most part it's been a quiet development cycle for the USB core, but there are the usual "hot spots" of development activity. Included in here are: - Thunderbolt driver updates: - fixes for devices without displayport adapters - lane bonding support and improvements - other minor changes based on device testing - dwc3 gadget driver changes. It seems this driver will never be finished given that the IP core is showing up in zillions of new devices and each implementation decides to do something different with it... - uvc gadget driver updates as more devices start to use and rely on this hardware as well - usb_maxpacket() api changes to remove an unneeded and unused parameter. - usb-serial driver device id updates and small cleanups - typec cleanups and fixes based on device testing - device tree updates for usb properties - lots of other small fixes and driver updates. All of these have been in linux-next for weeks with no reported problems" * tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) USB: new quirk for Dell Gen 2 devices usb: dwc3: core: Add error log when core soft reset failed usb: dwc3: gadget: Move null pinter check to proper place usb: hub: Simplify error and success path in port_over_current_notify usb: cdns3: allocate TX FIFO size according to composite EP number usb: dwc3: Fix ep0 handling when getting reset while doing control transfer usb: Probe EHCI, OHCI controllers asynchronously usb: isp1760: Fix out-of-bounds array access xhci: Don't defer primary roothub registration if there is only one roothub USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI xhci: Remove quirk for over 10 year old evaluation hardware xhci: prevent U2 link power state if Intel tier policy prevented U1 xhci: use generic command timer for stop endpoint commands. usb: host: xhci-plat: omit shared hcd if either root hub has no ports usb: host: xhci-plat: prepare operation w/o shared hcd usb: host: xhci-plat: create shared hcd after having added main hcd xhci: prepare for operation w/o shared hcd xhci: factor out parts of xhci_gen_setup() ...
2022-05-29Merge tag 'input-for-v5.19-rc0' of ↵Linus Torvalds5-14/+2571
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for the Azoteq IQS7222A/B/C capacitive touch controller - a new driver for Raspberry Pi Sense HAT joystick - sun4i-lradc-keys gained support of R329 and D1 variants, plus it can be now used as a wakeup source - pm8941-pwrkey can now properly handle PON GEN3 variants; the driver also implements software debouncing and has a workaround for missing key press events - assorted driver fixes and cleanups * tag 'input-for-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: stmfts - do not leave device disabled in stmfts_input_open Input: gpio-keys - cancel delayed work only in case of GPIO Input: cypress_ps2 - fix typo in comment Input: vmmouse - disable vmmouse before entering suspend mode dt-bindings: google,cros-ec-keyb: Fixup bad compatible match Input: cros-ec-keyb - allow skipping keyboard registration dt-bindings: google,cros-ec-keyb: Introduce switches only compatible Input: psmouse-smbus - avoid flush_scheduled_work() usage Input: bcm-keypad - remove unneeded NULL check before clk_disable_unprepare Input: sparcspkr - fix refcount leak in bbc_beep_probe Input: sun4i-lradc-keys - add support for R329 and D1 Input: sun4i-lradc-keys - add optional clock/reset support dt-bindings: input: sun4i-lradc-keys: Add R329 and D1 compatibles Input: sun4i-lradc-keys - add wakeup support Input: pm8941-pwrkey - simulate missed key press events Input: pm8941-pwrkey - add software key press debouncing support Input: pm8941-pwrkey - add support for PON GEN3 base addresses Input: pm8941-pwrkey - fix error message Input: synaptics-rmi4 - remove unnecessary flush_workqueue() Input: ep93xx_keypad - use devm_platform_ioremap_resource() helper ...
2022-05-28Merge tag 'v5.18' into nextDmitry Torokhov3-6/+26
Sync up with mainline to get updates to OMAP4 keypad driver and other upstream goodies.
2022-05-27xen: switch gnttab_end_foreign_access() to take a struct page pointerJuergen Gross1-2/+2
Instead of a virtual kernel address use a pointer of the associated struct page as second parameter of gnttab_end_foreign_access(). Most users have that pointer available already and are creating the virtual address from it, risking problems in case the memory is located in highmem. gnttab_end_foreign_access() itself won't need to get the struct page from the address again. Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-17Input: sparcspkr - fix refcount leak in bbc_beep_probeMiaoqian Lin1-0/+1
of_find_node_by_path() calls of_find_node_opts_by_path(), which returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: 9c1a5077fdca ("input: Rewrite sparcspkr device probing.") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220516081018.42728-1-linmq006@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-25Input: pm8941-pwrkey - simulate missed key press eventsDavid Collins1-0/+11
The status of the keys connected to the KPDPWR_N and RESIN_N pins is identified by reading corresponding bits in the interrupt real time status register. If the status has changed by the time that the interrupt is handled then a press event will be missed. Maintain a last known status variable to find unbalanced release events and simulate press events for each accordingly. Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com> Link: https://lore.kernel.org/r/20220422191239.6271-6-quic_amelende@quicinc.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-25Input: pm8941-pwrkey - add software key press debouncing supportDavid Collins1-6/+77
On certain PMICs, an unexpected assertion of KPDPWR_DEB (the positive logic hardware debounced power key signal) may be seen during the falling edge of KPDPWR_N (i.e. a power key press) when it occurs close to the rising edge of SLEEP_CLK. This then triggers a spurious KPDPWR interrupt. Handle this issue by adding software debouncing support to ignore key events that occur within the hardware debounce delay after the most recent key release event. Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com> Link: https://lore.kernel.org/r/20220422191239.6271-5-quic_amelende@quicinc.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-25Input: pm8941-pwrkey - add support for PON GEN3 base addressesAnjelique Melendez1-7/+24
Currently, PON address is read from the "reg" property. For PON GEN3, which starts with PMK8350, the "reg" property will have both the PON HLOS and PON PBS addesses defined. Add support so that all PON generations can be configured. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com> Link: https://lore.kernel.org/r/20220422191239.6271-4-quic_amelende@quicinc.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-25Input: pm8941-pwrkey - fix error messageAnjelique Melendez1-1/+1
Currently, error message reads "failed to set debounce". However, code is attempting to read revision not set debounce. Fix this. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com> Link: https://lore.kernel.org/r/20220422191239.6271-3-quic_amelende@quicinc.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-23Input: remove third argument of usb_maxpacket()Vincent Mailhol4-4/+4
The third argument of usb_maxpacket(): in_out has been deprecated because it could be derived from the second argument (e.g. using usb_pipeout(pipe)). N.B. function usb_maxpacket() was made variadic to accommodate the transition from the old prototype with three arguments to the new one with only two arguments (so that no renaming is needed). The variadic argument is to be removed once all users of usb_maxpacket() get migrated. CC: Ville Syrjala <syrjala@sci.fi> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Henk Vergonet <Henk.Vergonet@gmail.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20220317035514.6378-4-mailhol.vincent@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-18Input: iqs7222 - avoid dereferencing a NULL pointerJeff LaBundy1-2/+3
Select callers of iqs7222_parse_props() do not expect a child node to be derived and returned via pointer. As such, these callers set **child_node to NULL. However, this pointer is dereferenced in all cases. To solve this problem, dereference the pointer only for cases that expect a child node in the first place. In these cases, the caller provides a valid pointer. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220417214132.497487-1-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-17Input: iqs7222 - propagate some error codes correctlyDan Carpenter1-16/+16
If fwnode_property_count_u32() returns a negative error code then, because of type promotion, the "count > ARRAY_SIZE(pins)" condition will be true. The negative "count" is type promoted to a high unsigned size_t value. That means the "else if (count < 0)" condition will always be false and we don't print that error message or propagate the error code from fwnode_property_count_u32() as intended. Fix this by re-ordering the checks so that we check for negative first. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220412153954.GA15406@kili Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-09Input: add support for Azoteq IQS7222A/B/CJeff LaBundy3-0/+2456
This patch adds support for the Azoteq IQS7222A/B/C family of capacitive touch controllers. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220403221659.865997-3-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-04-01Merge branch 'for-linus' of ↵Linus Torvalds1-10/+3
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a revert of a patch resetting extra buttons on touchpads claiming to be buttonpads as this caused regression on certain Dell devices - a new driver for Mediatek MT6779 keypad - a new driver for Imagis touchscreen - rework of Google/Chrome OS "Vivaldi" keyboard handling - assorted driver fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (31 commits) Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads" Input: adi - remove redundant variable z Input: add Imagis touchscreen driver dt-bindings: input/touchscreen: bindings for Imagis Input: synaptics - enable InterTouch on ThinkPad T14/P14s Gen 1 AMD Input: stmfts - fix reference leak in stmfts_input_open Input: add bounds checking to input_set_capability() Input: iqs5xx - use local input_dev pointer HID: google: modify HID device groups of eel HID: google: Add support for vivaldi to hid-hammer HID: google: extract Vivaldi hid feature mapping for use in hid-hammer Input: extract ChromeOS vivaldi physmap show function HID: google: switch to devm when registering keyboard backlight LED Input: mt6779-keypad - fix signedness bug Input: mt6779-keypad - add MediaTek keypad driver dt-bindings: input: Add bindings for Mediatek matrix keypad Input: da9063 - use devm_delayed_work_autocancel() Input: goodix - fix race on driver unbind Input: goodix - use input_copy_abs() helper Input: add input_copy_abs() function ...
2022-03-29Merge tag 'for-linus-5.18-rc1-tag' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - A bunch of minor cleanups - A fix for kexec in Xen dom0 when executed on a high cpu number - A fix for resuming after suspend of a Xen guest with assigned PCI devices - A fix for a crash due to not disabled preemption when resuming as Xen dom0 * tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: fix is_xen_pmu() xen: don't hang when resuming PCI device arch:x86:xen: Remove unnecessary assignment in xen_apic_read() xen/grant-table: remove readonly parameter from functions xen/grant-table: remove gnttab_*transfer*() functions drivers/xen: use helper macro __ATTR_RW x86/xen: Fix kerneldoc warning xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32 xen: use time_is_before_eq_jiffies() instead of open coding it
2022-03-25Merge tag 'platform-drivers-x86-v5.18-1' of ↵Linus Torvalds1-1/+23
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: "New drivers: - AMD Host System Management Port (HSMP) - Intel Software Defined Silicon Removed drivers (functionality folded into other drivers): - intel_cht_int33fe_microb - surface3_button amd-pmc: - s2idle bug-fixes - Support for AMD Spill to DRAM STB feature hp-wmi: - Fix SW_TABLET_MODE detection method (and other fixes) - Support omen thermal profile policy v1 serial-multi-instantiate: - Add SPI device support - Add support for CS35L41 amplifiers used in new laptops think-lmi: - syfs-class-firmware-attributes Certificate authentication support thinkpad_acpi: - Fixes + quirks - Add platform_profile support on AMD based ThinkPads x86-android-tablets: - Improve Asus ME176C / TF103C support - Support Nextbook Ares 8, Lenovo Tab 2 830 and 1050 tablets Lots of various other small fixes and hardware-id additions" * tag 'platform-drivers-x86-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (60 commits) platform/x86: think-lmi: Certificate authentication support Documentation: syfs-class-firmware-attributes: Lenovo Certificate support platform/x86: amd-pmc: Only report STB errors when STB enabled platform/x86: amd-pmc: Drop CPU QoS workaround platform/x86: amd-pmc: Output error codes in messages platform/x86: amd-pmc: Move to later in the suspend process ACPI / x86: Add support for LPS0 callback handler platform/x86: thinkpad_acpi: consistently check fan_get_status return. platform/x86: hp-wmi: support omen thermal profile policy v1 platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls platform/x86: hp-wmi: Fix SW_TABLET_MODE detection method platform/x86: hp-wmi: Fix hp_wmi_read_int() reporting error (0x05) platform/x86: amd-pmc: Validate entry into the deepest state on resume platform/x86: thinkpad_acpi: Don't use test_bit on an integer platform/x86: thinkpad_acpi: Fix compiler warning about uninitialized err variable platform/x86: thinkpad_acpi: clean up dytc profile convert platform/x86: x86-android-tablets: Depend on EFI and SPI platform/x86: amd-pmc: uninitialized variable in amd_pmc_s2d_init() platform/x86: intel-uncore-freq: fix uncore_freq_common_init() error codes ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-15 07:19:48 +0300