summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)AuthorFilesLines
2020-08-27RDMA/ucma: Add missing locking around rdma_leave_multicast()Jason Gunthorpe1-0/+2
All entry points to the rdma_cm from a ULP must be single threaded, even this error unwinds. Add the missing locking. Fixes: 7c11910783a1 ("RDMA/ucma: Put a lock around every call to the rdma_cm layer") Link: https://lore.kernel.org/r/20200818120526.702120-11-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-27RDMA/ucma: Fix locking for ctx->events_reportedJason Gunthorpe1-1/+3
This value is locked under the file->mut, ensure it is held whenever touching it. The case in ucma_migrate_id() is a race, while in ucma_free_uctx() it is already not possible for the write side to run, the movement is just for clarity. Fixes: 88314e4dda1e ("RDMA/cma: add support for rdma_migrate_id()") Link: https://lore.kernel.org/r/20200818120526.702120-10-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-27RDMA/ucma: Fix the locking of ctx->fileJason Gunthorpe1-1/+5
ctx->file is changed under the file->mut lock by ucma_migrate_id(), which is impossible to lock correctly. Instead change ctx->file under the handler_lock and ctx_table lock and revise all places touching ctx->file to use this locking when reading ctx->file. Link: https://lore.kernel.org/r/20200818120526.702120-9-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-27RDMA/ucma: Do not use file->mut to lock destroyingJason Gunthorpe1-3/+11
The only reader of destroying is inside a handler under the handler_mutex, so directly use the handler_mutex when setting it instead of the larger file->mut. As the refcount could be zero here, and the cm_id already freed, and additional refcount grab around the locking is required to touch the cm_id. Link: https://lore.kernel.org/r/20200818120526.702120-8-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-27RDMA/cma: Add missing locking to rdma_accept()Jason Gunthorpe2-7/+30
In almost all cases rdma_accept() is called under the handler_mutex by ULPs from their handler callbacks. The one exception was ucma which did not get the handler_mutex. To improve the understand-ability of the locking scheme obtain the mutex for ucma as well. This improves how ucma works by allowing it to directly use handler_mutex for some of its internal locking against the handler callbacks intead of the global file->mut lock. There does not seem to be a serious bug here, other than a DISCONNECT event can be delivered concurrently with accept succeeding. Link: https://lore.kernel.org/r/20200818120526.702120-7-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-27RDMA/ucma: Remove mc_list and rely on xarrayJason Gunthorpe1-37/+22
It is not really necessary to keep a linked list of mcs associated with each context when we can just scan the xarray to find the right things. The removes another overloading of file->mut by relying on the xarray locking for mc instead. Link: https://lore.kernel.org/r/20200818120526.702120-6-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-27RDMA/ucma: Fix error cases around ucma_alloc_ctx()Jason Gunthorpe1-26/+42
The store to ctx->cm_id was based on the idea that _ucma_find_context() would not return the ctx until it was fully setup. Without locking this doesn't work properly. Split things so that the xarray is allocated with NULL to reserve the ID and once everything is final set the cm_id and store. Along the way this shows that the error unwind in ucma_get_event() if a new ctx is created is wrong, fix it up. Link: https://lore.kernel.org/r/20200818120526.702120-5-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-27RDMA/ucma: Consolidate the two destroy flowsJason Gunthorpe1-42/+22
ucma_close() is open coding the tail end of ucma_destroy_id(), consolidate this duplicated code into a function. Link: https://lore.kernel.org/r/20200818120526.702120-4-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-27RDMA/ucma: Remove unnecessary locking of file->ctx_list in closeJason Gunthorpe1-4/+7
During the file_operations release function it is already not possible that write() can be running concurrently, remove the extra locking around the ctx_list. Link: https://lore.kernel.org/r/20200818120526.702120-3-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-27RDMA/ucma: Fix refcount 0 incr in ucma_get_ctx()Jason Gunthorpe1-2/+2
Both ucma_destroy_id() and ucma_close_id() (triggered from an event via a wq) can drive the refcount to zero. ucma_get_ctx() was wrongly assuming that the refcount can only go to zero from ucma_destroy_id() which also removes it from the xarray. Use refcount_inc_not_zero() instead. Link: https://lore.kernel.org/r/20200818120526.702120-2-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-27IB/mlx5: Add DCT RoCE LAG supportMark Zhang1-1/+8
When DCT QPs work in RoCE LAG mode: 1. DCT creation is allowed only when it is supported 2. The "port" of a DCT QP is assigned in a round-robin way Link: https://lore.kernel.org/r/20200818115245.700581-3-leon@kernel.org Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-27IB/mlx5: Add tx_affinity support for DCI QPMark Zhang1-8/+6
DCI QP supports tx_affinity as well. Link: https://lore.kernel.org/r/20200818115245.700581-2-leon@kernel.org Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-25RDMA/cm: Add tracepoints to track MAD send operationsChuck Lever2-2/+125
Surface the operation of MAD exchanges during connection establishment. Some samples: [root@klimt ~]# trace-cmd report -F ib_cma cpus=4 kworker/0:4-123 [000] 60.677388: icm_send_rep: local_id=1965336542 remote_id=1096195961 state=REQ_RCVD lap_state=LAP_UNINIT kworker/u8:11-391 [002] 60.678808: icm_send_req: local_id=1982113758 remote_id=0 state=IDLE lap_state=LAP_UNINIT kworker/0:4-123 [000] 60.679652: icm_send_rtu: local_id=1982113758 remote_id=1079418745 state=REP_RCVD lap_state=LAP_UNINIT nfsd-1954 [001] 60.691350: icm_send_rep: local_id=1998890974 remote_id=1129750393 state=MRA_REQ_SENT lap_state=LAP_UNINIT nfsd-1954 [003] 62.017931: icm_send_drep: local_id=1998890974 remote_id=1129750393 state=TIMEWAIT lap_state=LAP_UNINIT Link: https://lore.kernel.org/r/159767240197.2968.12048458026453596018.stgit@klimt.1015granger.net Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-25RDMA/cm: Replace pr_debug() call sites with tracepointsChuck Lever4-55/+351
In the interest of converging on a common instrumentation infrastructure, modernize the pr_debug() call sites added by commit 119bf81793ea ("IB/cm: Add debug prints to ib_cm"). The new tracepoints appear in a new "ib_cma" subsystem. The conversion is somewhat mechanical. Someone more familiar with the semantics of the recorded information might suggest additional data capture. Some benefits include: - Tracepoints enable "always on" reporting of these errors - The error records are structured and compact - Tracepoints provide hooks for eBPF scripts Sample output: nfsd-1954 [003] 62.017901: icm_dreq_skipped: local_id=1998890974 remote_id=1129750393 state=DREQ_RCVD lap_state=LAP_UNINIT Link: https://lore.kernel.org/r/159767239665.2968.10613294222688696646.stgit@klimt.1015granger.net Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24RDMA/core: Move the rdma_show_ib_cm_event() macroChuck Lever1-40/+0
Refactor: Make it globally available in the utilities header. Link: https://lore.kernel.org/r/159767239131.2968.9520990257041764685.stgit@klimt.1015granger.net Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24RDMA/efa: Remove redundant udata check from alloc ucontext responseGal Pressman1-6/+4
The alloc ucontext flow is always called with a valid udata, there's no need to test whether it's NULL. While at it, the 'udata->outlen' check is removed as well as we copy the minimum between the size of the response and outlen, so in case of zero outlen, zero bytes will be copied. Link: https://lore.kernel.org/r/20200818110835.54299-1-galpress@amazon.com Reviewed-by: Firas JahJah <firasj@amazon.com> Reviewed-by: Yossi Leybovich <sleybo@amazon.com> Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24RDMA/vmw_pvrdma: Fix kernel-doc documentationKamal Heib4-6/+6
Fix the kernel-doc documentation by matching between the functions definitions and documentation. Link: https://lore.kernel.org/r/20200820123512.105193-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Acked-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24RDMA/rxe: prevent rxe creation on top of vlan interfaceMohammad Heib2-0/+12
Creating rxe device on top of vlan interface will create a non-functional device that has an empty gids table and can't be used for rdma cm communication. This is caused by the logic in enum_all_gids_of_dev_cb()/is_eth_port_of_netdev(), which only considers networks connected to "upper devices" of the configured network device, resulting in an empty set of gids for a vlan interface, and attempts to connect via this rdma device fail in cm_init_av_for_response because no gids can be resolved. Apparently, this behavior was implemented to fit the HW-RoCE devices that create RoCE device per port, therefore RXE must behave the same like HW-RoCE devices and create rxe device per real device only. In order to communicate via a vlan interface, the user must use the gid index of the vlan address instead of creating rxe over vlan. Link: https://lore.kernel.org/r/20200811150415.3693-1-goody698@gmail.com Signed-off-by: Mohammad Heib <goody698@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24RDMA/rxe: Fix the parent sysfs read when the interface has 15 charsYi Zhang1-1/+1
'parent' sysfs reads will yield '\0' bytes when the interface name has 15 chars, and there will no "\n" output. To reproduce, create one interface with 15 chars: [root@test ~]# ip a s enp0s29u1u7u3c2 2: enp0s29u1u7u3c2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000 link/ether 02:21:28:57:47:17 brd ff:ff:ff:ff:ff:ff inet6 fe80::ac41:338f:5bcd:c222/64 scope link noprefixroute valid_lft forever preferred_lft forever [root@test ~]# modprobe rdma_rxe [root@test ~]# echo enp0s29u1u7u3c2 > /sys/module/rdma_rxe/parameters/add [root@test ~]# cat /sys/class/infiniband/rxe0/parent enp0s29u1u7u3c2[root@test ~]# [root@test ~]# f="/sys/class/infiniband/rxe0/parent" [root@test ~]# echo "$(<"$f")" -bash: warning: command substitution: ignored null byte in input enp0s29u1u7u3c2 Use scnprintf and PAGE_SIZE to fill the sysfs output buffer. Cc: stable@vger.kernel.org Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200820153646.31316-1-yi.zhang@redhat.com Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Yi Zhang <yi.zhang@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24RDMA/rtrs-srv: Replace device_register with device_initialize and device_addMd Haris Iqbal2-4/+5
There are error cases when we will call free_srv before device kobject is initialized; in such cases calling put_device generates the following warning: kobject: '(null)' (000000009f5445ed): is not initialized, yet kobject_put() is being called. So call device_initialize() only once when the server is allocated. If we end up calling put_srv() and subsequently free_srv(), our call to put_device() would result in deletion of the obj. Call device_add() later when we actually have a connection. Correspondingly, call device_del() instead of device_unregister() when srv->dev_ref falls to 0. Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality") Link: https://lore.kernel.org/r/20200811092722.2450-1-haris.iqbal@cloud.ionos.com Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com> Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24IB/mlx4: Adjust delayed work when a dup is observedHåkon Bugge1-0/+3
When scheduling delayed work to clean up the cache, if the entry already has been scheduled for deletion, we adjust the delay. Fixes: 3cf69cc8dbeb ("IB/mlx4: Add CM paravirtualization") Link: https://lore.kernel.org/r/20200803061941.1139994-7-haakon.bugge@oracle.com Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24IB/mlx4: Add support for REJ due to timeoutHåkon Bugge2-1/+137
A CM REJ packet with its reason equal to timeout is a special beast in the sense that it doesn't have a Remote Communication ID nor does it have a Remote Port GID. Using CX-3 virtual functions, either from a bare-metal machine or pass-through from a VM, MAD packets are proxied through the PF driver. Since the VF drivers have separate name spaces for MAD Transaction Ids (TIDs), the PF driver has to re-map the TIDs and keep the book keeping in a cache. This proxying doesn't not handle said REJ packets. If the active side abandons its connection attempt after having sent a REQ, it will send a REJ with the reason being timeout. This example can be provoked by a simple user-verbs program, which ends up doing: rdma_connect(cm_id, &conn_param); rdma_destroy_id(cm_id); using the async librdmacm API. Having dynamic debug prints enabled in the mlx4_ib driver, we will then see: mlx4_ib_demux_cm_handler: Couldn't find an entry for pv_cm_id 0x0, attr_id 0x12 The solution is to introduce a radix-tree. When a REQ packet is received and handled in mlx4_ib_demux_cm_handler(), we know the connecting peer's para-virtual cm_id and the destination slave. We then insert an entry into the tree with said information. We also schedule work to remove this entry from the tree and free it, in order to avoid memory leak. When a REJ packet with reason timeout is received, we can look up the slave in the tree, and deliver the packet to the correct slave. When a duplicate REQ packet is received, the entry is in the tree. In this case, we adjust the delayed work in order to avoid a too premature eviction of the entry. When cleaning up, we simply traverse the tree and modify any delayed work to use a zero delay. A subsequent flush of the system_wq will ensure all entries being wiped out. Fixes: 3cf69cc8dbeb ("IB/mlx4: Add CM paravirtualization") Link: https://lore.kernel.org/r/20200803061941.1139994-6-haakon.bugge@oracle.com Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24IB/mlx4: Fix starvation in paravirt mux/demuxHåkon Bugge2-3/+33
The mlx4 driver will proxy MAD packets through the PF driver. A VM or an instantiated VF will send its MAD packets to the PF driver using loop-back. The PF driver will be informed by an interrupt, but defer the handling and polling of CQEs to a worker thread running on an ordered work-queue. Consider the following scenario: the VMs will in short proximity in time, for example due to a network event, send many MAD packets to the PF driver. Lets say there are K VMs, each sending N packets. The interrupt from the first VM will start the worker thread, which will poll N CQEs. A common case here is where the PF driver will multiplex the packets received from the VMs out on the wire QP. But before the wire QP has returned a send CQE and associated interrupt, the other K - 1 VMs have sent their N packets as well. The PF driver has to multiplex K * N packets out on the wire QP. But the send-queue on the wire QP has a finite capacity. So, in this scenario, if K * N is larger than the send-queue capacity of the wire QP, we will get MAD packets dropped on the floor with this dynamic debug message: mlx4_ib_multiplex_mad: failed sending GSI to wire on behalf of slave 2 (-11) and this despite the fact that the wire send-queue could have capacity, but the PF driver isn't aware, because the wire send CQEs have not yet been polled. We can also have a similar scenario inbound, with a wire recv-queue larger than the tunnel QP's send-queue. If many remote peers send MAD packets to the very same VM, the tunnel send-queue destined to the VM could allegedly be construed to be full by the PF driver. This starvation is fixed by introducing separate work queues for the wire QPs vs. the tunnel QPs. With this fix, using a dual ported HCA, 8 VFs instantiated, we could run cmtime on each of the 18 interfaces towards a similar configured peer, each cmtime instance with 800 QPs (all in all 14400 QPs) without a single CM packet getting lost. Fixes: 3cf69cc8dbeb ("IB/mlx4: Add CM paravirtualization") Link: https://lore.kernel.org/r/20200803061941.1139994-5-haakon.bugge@oracle.com Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24IB/mlx4: Separate tunnel and wire bufs parametersHåkon Bugge2-21/+26
Using CX-3 in virtualized mode, MAD packets are proxied through the PF driver. The feed is N tunnel QPs, and what is received from the VFs is multiplexed out on the wire QP. Since this is a many-to-one scenario, it is better to have separate initialization parameters for the two usages. The number of wire and tunnel bufs are yanked up to 2K and 512 respectively. With this set of parameters, a system consisting of eight physical servers, each with eight VMs and 14 I/O servers (BM), can run switch fail-over without seeing: mlx4_ib_demux_mad: failed sending GSI to slave 3 via tunnel qp (-11) or mlx4_ib_multiplex_mad: failed sending GSI to wire on behalf of slave 2 (-11) Fixes: 3cf69cc8dbeb ("IB/mlx4: Add CM paravirtualization") Link: https://lore.kernel.org/r/20200803061941.1139994-4-haakon.bugge@oracle.com Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24IB/mlx4: Add support for MRAHåkon Bugge1-2/+3
Using CX-3 in virtualized mode, MAD packets are proxied through the PF driver. However, the handling lacks support of the MRA (Message Receipt Acknowledgment) packet. When having dynamic debug enabled, we see tons of: mlx4_ib_multiplex_cm_handler: id{slave: 7, sl_cm_id: 0x8fcb45a0} is NULL! attr_id: 0x11 Fixes: 3cf69cc8dbeb ("IB/mlx4: Add CM paravirtualization") Link: https://lore.kernel.org/r/20200803061941.1139994-3-haakon.bugge@oracle.com Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24IB/mlx4: Add and improve loggingHåkon Bugge2-47/+40
Add missing check for success after call to mlx4_ib_send_to_wire() in mlx4_ib_multiplex_mad(). Amended the existing pr_debug() in mlx4_ib_multiplex_cm_handler() and mlx4_ib_demux_cm_handler() with attr_id during a lookup failure. Removed two noisy pr_debug() in mad.c Fixes: 3cf69cc8dbeb ("IB/mlx4: Add CM paravirtualization") Link: https://lore.kernel.org/r/20200803061941.1139994-2-haakon.bugge@oracle.com Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva48-112/+100
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-20Revert "RDMA/hns: Reserve one sge in order to avoid local length error"Weihang Li5-14/+8
This patch caused some issues on SEND operation, and it should be reverted to make the drivers work correctly. There will be a better solution that has been tested carefully to solve the original problem. This reverts commit 711195e57d341e58133d92cf8aaab1db24e4768d. Fixes: 711195e57d34 ("RDMA/hns: Reserve one sge in order to avoid local length error") Link: https://lore.kernel.org/r/1597829984-20223-1-git-send-email-liweihang@huawei.com Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-20RDMA/hfi1: Correct an interlock issue for TID RDMA WRITE requestKaike Wan1-0/+1
The following message occurs when running an AI application with TID RDMA enabled: hfi1 0000:7f:00.0: hfi1_0: [QP74] hfi1_tid_timeout 4084 hfi1 0000:7f:00.0: hfi1_0: [QP70] hfi1_tid_timeout 4084 The issue happens when TID RDMA WRITE request is followed by an IB_WR_RDMA_WRITE_WITH_IMM request, the latter could be completed first on the responder side. As a result, no ACK packet for the latter could be sent because the TID RDMA WRITE request is still being processed on the responder side. When the TID RDMA WRITE request is eventually completed, the requester will wait for the IB_WR_RDMA_WRITE_WITH_IMM request to be acknowledged. If the next request is another TID RDMA WRITE request, no TID RDMA WRITE DATA packet could be sent because the preceding IB_WR_RDMA_WRITE_WITH_IMM request is not completed yet. Consequently the IB_WR_RDMA_WRITE_WITH_IMM will be retried but it will be ignored on the responder side because the responder thinks it has already been completed. Eventually the retry will be exhausted and the qp will be put into error state on the requester side. On the responder side, the TID resource timer will eventually expire because no TID RDMA WRITE DATA packets will be received for the second TID RDMA WRITE request. There is also risk of a write-after-write memory corruption due to the issue. Fix by adding a requester side interlock to prevent any potential data corruption and TID RDMA protocol error. Fixes: a0b34f75ec20 ("IB/hfi1: Add interlock between a TID RDMA request and other requests") Link: https://lore.kernel.org/r/20200811174931.191210.84093.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> # 5.4.x+ Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-20RDMA/bnxt_re: Do not add user qps to flushlistSelvin Xavier1-1/+2
Driver shall add only the kernel qps to the flush list for clean up. During async error events from the HW, driver is adding qps to this list without checking if the qp is kernel qp or not. Add a check to avoid user qp addition to the flush list. Fixes: 942c9b6ca8de ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing") Fixes: c50866e2853a ("bnxt_re: fix the regression due to changes in alloc_pbl") Link: https://lore.kernel.org/r/1596689148-4023-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-20RDMA/core: Fix spelling mistake "Could't" -> "Couldn't"Colin Ian King1-1/+1
There is a spelling mistake in a pr_warn message. Fix it. Link: https://lore.kernel.org/r/20200810075824.46770-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-18RDMA/cm: Remove unused cm_classJason Gunthorpe1-24/+0
Previous commits removed all references to the /sys/class/infiniband_cm/ directory represented by the cm_class symbol. Remove the directory and cm_class. Fixes: a1a8e4a85cf7 ("rdma: Delete the ib_ucm module") Link: https://lore.kernel.org/r/0-v1-90096a98c476+205-remove_cm_leftovers_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-18IB/isert: remove duplicated error printsMax Gurtovoy1-12/+3
The isert_post_recv function prints an error in case of failures, so no need for the callers to add another print. Link: https://lore.kernel.org/r/20200805121231.166162-2-maxg@mellanox.com Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-18RDMA/mlx5: Enable sniffer when device is in switchdev modeMaor Gottlieb1-1/+2
In order to allow sniffer when the RDMA device is in switchdev mode, we don't need to set the source port when creating the sniffer rule. Link: https://lore.kernel.org/r/20200803060214.15328-1-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-18RDMA/mlx5: Add new IB rates supportMark Zhang1-3/+27
Support 56, 25, 100, 200 and 50Gbps IB rates in mlx5 driver. Link: https://lore.kernel.org/r/20200802081712.1993490-1-leon@kernel.org Signed-off-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-18RDMA/efa: Introduce SRD RNR retryGal Pressman4-9/+31
This patch introduces the ability to configure SRD QPs with the RNR retry parameter when issuing a modify QP command. In addition, a capability bit was added to report support to the userspace library. Link: https://lore.kernel.org/r/20200731060420.17053-5-galpress@amazon.com Reviewed-by: Firas JahJah <firasj@amazon.com> Reviewed-by: Yossi Leybovich <sleybo@amazon.com> Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-18RDMA/efa: Introduce SRD QP state machineGal Pressman1-2/+117
This precursory patch adds the SRD QP type state machine, which is currently identical to the one of UD QP type. A following patch is going to change the SRD QP state machine to support RNR retry modifications. Link: https://lore.kernel.org/r/20200731060420.17053-4-galpress@amazon.com Reviewed-by: Firas JahJah <firasj@amazon.com> Reviewed-by: Yossi Leybovich <sleybo@amazon.com> Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-18RDMA/efa: Be consistent with modify QP bitmaskGal Pressman2-16/+22
The modify QP bitmask was not consistent with other bitmasks used in the device interface. Remove the bitmask enum and allow usage with EFA_GET/SET. Link: https://lore.kernel.org/r/20200731060420.17053-3-galpress@amazon.com Reviewed-by: Firas JahJah <firasj@amazon.com> Reviewed-by: Yossi Leybovich <sleybo@amazon.com> Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-18RDMA/efa: Add a generic capability check helperGal Pressman1-6/+5
Instead of adding a new function for each capability added, introduce a generic helper to query device capabilities. Link: https://lore.kernel.org/r/20200731060420.17053-2-galpress@amazon.com Reviewed-by: Firas JahJah <firasj@amazon.com> Reviewed-by: Yossi Leybovich <sleybo@amazon.com> Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-18RDMA: Remove constant domain argument from flow creation callLeon Romanovsky3-31/+13
The "domain" argument is constant and modern device (mlx5) doesn't support anything except IB_FLOW_DOMAIN_USER, so delete this extra parameter and simplify code. Link: https://lore.kernel.org/r/20200730081235.1581127-4-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-18RDMA/mlx5: Replace open-coded offsetofend() macroLeon Romanovsky4-21/+19
Clean mlx5_ib from open-coded implementations of offsetofend(). Link: https://lore.kernel.org/r/20200730081235.1581127-3-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-18RDMA/mlx5: Simplify multiple else-if cases with switch keywordLeon Romanovsky1-49/+75
Improve readability of fs.c by converting multiple else-if constructions to be implemented with switch keyword. Link: https://lore.kernel.org/r/20200730081235.1581127-2-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-18RDMA/usnic: Fix spelling mistake "transistion" -> "transition"Colin Ian King1-1/+1
There is a spelling mistake in a usnic_err error message. Fix it. Link: https://lore.kernel.org/r/20200805141459.23069-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-18RDMA/hns: Fix spelling mistake "epmty" -> "empty"Colin Ian King1-1/+1
There is a spelling mistake in a dev_dbg message. Fix it. Link: https://lore.kernel.org/r/20200805141111.22804-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-12mm/gup: remove task_struct pointer for all gup codePeter Xu1-1/+1
After the cleanup of page fault accounting, gup does not need to pass task_struct around any more. Remove that parameter in the whole gup stack. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Link: http://lkml.kernel.org/r/20200707225021.200906-26-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds121-5992/+6077
Pull rdma updates from Jason Gunthorpe: "A quiet cycle after the larger 5.8 effort. Substantially cleanup and driver work with a few smaller features this time. - Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re - Removal of dead or redundant code across the drivers - RAW resource tracker dumps to include a device specific data blob for device objects to aide device debugging - Further advance the IOCTL interface, remove the ability to turn it off. Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands - Remove stubs related to devices with no pkey table - A shared CQ scheme to allow multiple ULPs to share the CQ rings of a device to give higher performance - Several more static checker, syzkaller and rare crashers fixed" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (121 commits) RDMA/mlx5: Fix flow destination setting for RDMA TX flow table RDMA/rxe: Remove pkey table RDMA/umem: Add a schedule point in ib_umem_get() RDMA/hns: Fix the unneeded process when getting a general type of CQE error RDMA/hns: Fix error during modify qp RTS2RTS RDMA/hns: Delete unnecessary memset when allocating VF resource RDMA/hns: Remove redundant parameters in set_rc_wqe() RDMA/hns: Remove support for HIP08_A RDMA/hns: Refactor hns_roce_v2_set_hem() RDMA/hns: Remove redundant hardware opcode definitions RDMA/netlink: Remove CAP_NET_RAW check when dump a raw QP RDMA/include: Replace license text with SPDX tags RDMA/rtrs: remove WQ_MEM_RECLAIM for rtrs_wq RDMA/rtrs-clt: add an additional random 8 seconds before reconnecting RDMA/cma: Execute rdma_cm destruction from a handler properly RDMA/cma: Remove unneeded locking for req paths RDMA/cma: Using the standard locking pattern when delivering the removal event RDMA/cma: Simplify DEVICE_REMOVAL for internal_id RDMA/efa: Add EFA 0xefa1 PCI ID RDMA/efa: User/kernel compatibility handshake mechanism ...
2020-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds5-60/+62
Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...
2020-08-06RDMA/mlx5: Fix flow destination setting for RDMA TX flow tableMichael Guralnik1-2/+4
For RDMA TX flow table, set destination type to be 'port' and prevent creation of flows with TIR destination. As RDMA TX is an egress flow table the rules on this flow table should not forward traffic back to the NIC and should set the destination to be the port. Without the setting of this destination type flow rules on the RDMA TX flow tables are not created as FW invokes a syndrome for undefined destination for the rule. Fixes: 24670b1a3166 ("net/mlx5: Add support for RDMA TX steering") Link: https://lore.kernel.org/r/20200803055849.14947-1-leon@kernel.org Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-05Merge tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-1/+5
Pull dma-mapping updates from Christoph Hellwig: - make support for dma_ops optional - move more code out of line - add generic support for a dma_ops bypass mode - misc cleanups * tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping: dma-contiguous: cleanup dma_alloc_contiguous dma-debug: use named initializers for dir2name powerpc: use the generic dma_ops_bypass mode dma-mapping: add a dma_ops_bypass flag to struct device dma-mapping: make support for dma ops optional dma-mapping: inline the fast path dma-direct calls dma-mapping: move the remaining DMA API calls out of line
2020-08-04Merge tag 'uninit-macro-v5.9-rc1' of ↵Linus Torvalds9-18/+18
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull uninitialized_var() macro removal from Kees Cook: "This is long overdue, and has hidden too many bugs over the years. The series has several "by hand" fixes, and then a trivial treewide replacement. - Clean up non-trivial uses of uninitialized_var() - Update documentation and checkpatch for uninitialized_var() removal - Treewide removal of uninitialized_var()" * tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: compiler: Remove uninitialized_var() macro treewide: Remove uninitialized_var() usage checkpatch: Remove awareness of uninitialized_var() macro mm/debug_vm_pgtable: Remove uninitialized_var() usage f2fs: Eliminate usage of uninitialized_var() macro media: sur40: Remove uninitialized_var() usage KVM: PPC: Book3S PR: Remove uninitialized_var() usage clk: spear: Remove uninitialized_var() usage clk: st: Remove uninitialized_var() usage spi: davinci: Remove uninitialized_var() usage ide: Remove uninitialized_var() usage rtlwifi: rtl8192cu: Remove uninitialized_var() usage b43: Remove uninitialized_var() usage drbd: Remove uninitialized_var() usage x86/mm/numa: Remove uninitialized_var() usage docs: deprecated.rst: Add uninitialized_var()
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-16 13:13:50 +0300