summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)AuthorFilesLines
2019-07-08RDMA/mlx5: Set RDMA DIM to be enabled by defaultLeon Romanovsky1-0/+2
Enable RDMA DIM by default for better user experience. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-08RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlinkYamin Friedman4-0/+25
Added parameter in ib_device for enabling dynamic interrupt moderation so that it can be configured in userspace using rdma tool. In order to set adaptive-moderation for an ib device the command is: rdma dev set [DEV] adaptive-moderation [on|off] Please set on/off. rdma dev show 0: mlx5_0: node_type ca fw 16.26.0055 node_guid 248a:0703:00a5:29d0 sys_image_guid 248a:0703:00a5:29d0 adaptive-moderation on rdma resource show cq dev mlx5_0 cqn 0 cqe 1023 users 4 poll-ctx UNBOUND_WORKQUEUE adaptive-moderation off comm [ib_core] Signed-off-by: Yamin Friedman <yaminf@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-08RDMA/core: Provide RDMA DIM support for ULPsYamin Friedman1-0/+45
Added the interface in the infiniband driver that applies the rdma_dim adaptive moderation. There is now a special function for allocating an ib_cq that uses rdma_dim. Performance improvement (ConnectX-5 100GbE, x86) running FIO benchmark over NVMf between two equal end-hosts with 56 cores across a Mellanox switch using null_blk device: READS without DIM: blk size | BW | IOPS | 99th percentile latency | 99.99th latency 512B | 3.8GiB/s | 7.7M | 1401 usec | 2442 usec 4k | 7.0GiB/s | 1.8M | 4817 usec | 6587 usec 64k | 10.7GiB/s| 175k | 9896 usec | 10028 usec IO WRITES without DIM: blk size | BW | IOPS | 99th percentile latency | 99.99th latency 512B | 3.6GiB/s | 7.5M | 1434 usec | 2474 usec 4k | 6.3GiB/s | 1.6M | 938 usec | 1221 usec 64k | 10.7GiB/s| 175k | 8979 usec | 12780 usec IO READS with DIM: blk size | BW | IOPS | 99th percentile latency | 99.99th latency 512B | 4GiB/s | 8.2M | 816 usec | 889 usec 4k | 10.1GiB/s| 2.65M| 3359 usec | 5080 usec 64k | 10.7GiB/s| 175k | 9896 usec | 10028 usec IO WRITES with DIM: blk size | BW | IOPS | 99th percentile latency | 99.99th latency 512B | 3.9GiB/s | 8.1M | 799 usec | 922 usec 4k | 9.6GiB/s | 2.5M | 717 usec | 1004 usec 64k | 10.7GiB/s| 176k | 8586 usec | 12256 usec The rdma_dim algorithm was designed to measure the effectiveness of moderation on the flow in a general way and thus should be appropriate for all RDMA storage protocols. rdma_dim is configured to be the default option based on performance improvement seen after extensive tests. Signed-off-by: Yamin Friedman <yaminf@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-08IB/mlx5: Report correctly tag matching rendezvous capabilityDanit Goldberg1-2/+6
Userspace expects the IB_TM_CAP_RC bit to indicate that the device supports RC transport tag matching with rendezvous offload. However the firmware splits this into two capabilities for eager and rendezvous tag matching. Only if the FW supports both modes should userspace be told the tag matching capability is available. Cc: <stable@vger.kernel.org> # 4.13 Fixes: eb761894351d ("IB/mlx5: Fill XRQ capabilities") Signed-off-by: Danit Goldberg <danitg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-08Merge branch 'vhca-tunnel' into rdma.git for-nextJason Gunthorpe1-4/+20
Max Gurtovoy says: ==================== Those two patches introduce VHCA tunnel mechanism to DEVX interface needed for Bluefield SOC. See extensive commit messages for more information. ==================== Based on the mlx5-next branch from git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for dependencies * branch 'vcha-tunnel': IB/mlx5: Implement VHCA tunnel mechanism in DEVX net/mlx5: Introduce VHCA tunnel device capability
2019-07-08IB/mlx5: Implement VHCA tunnel mechanism in DEVXMax Gurtovoy1-4/+20
This mechanism will allow function-A to perform operations "on behalf" of function-B via tunnel object. Function-A will have privileges for creating and using this tunnel object. For example, in the device emulation feature presented in Bluefield-1 SoC, using device emulation capability, one can present NVMe function to the host OS. Since the NVMe function doesn't have a normal command interface to the HCA HW, here is a need to create a channel that will be able to issue commands "on behalf" of this function. This channel is the VHCA_TUNNEL general object. The emulation software will create this tunnel for every managed function and issue commands via devx general cmd interface using the appropriate tunnel ID. When devX context will receive a command with non-zero vhca_tunnel_id, it will pass the command as-is down to the HCA. All the validation, security and resource tracking of the commands and the created tunneled objects is in the responsibility of the HCA FW. When a VHCA_TUNNEL object destroyed, the device will issue an internal FLR (function level reset) to the emulated function associated with this tunnel. This will destroy all the created resources using the tunnel mechanism. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-08RDMA/rvt: Do not use a kernel header in the ABIJason Gunthorpe1-5/+27
rvt was using ib_sge as part of it's ABI, which is not allowed. Introduce a new struct with the same layout and use it instead. Fixes: dabac6e460ce ("IB/hfi1: Move receive work queue struct into uapi directory") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-08RDMA/siw: Fix DEFINE_PER_CPU compilation when ARCH_NEEDS_WEAK_PER_CPUJason Gunthorpe2-9/+9
The initializer for the variable cannot be inside the macro (and zero initialization isn't needed anyhow). include/linux/percpu-defs.h:92:33: warning: '__pcpu_unique_use_cnt' initialized and declared 'extern' extern __PCPU_DUMMY_ATTRS char __pcpu_unique_##name; \ ^~~~~~~~~~~~~~ include/linux/percpu-defs.h:115:2: note: in expansion of macro 'DEFINE_PER_CPU_SECTION' DEFINE_PER_CPU_SECTION(type, name, "") ^~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/sw/siw/siw_main.c:129:8: note: in expansion of macro 'DEFINE_PER_CPU' static DEFINE_PER_CPU(atomic_t, use_cnt = ATOMIC_INIT(0)); ^~~~~~~~~~~~~~ Also the rules for PER_CPU require the variable names to be globally unique, so prefix them with siw_ Fixes: b9be6f18cf9e ("rdma/siw: transmit path") Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-07ibverbs/rxe: Remove variable self-initializationMaksym Planeta1-1/+1
In some cases (not in this particular one) variable self-initialization can lead to undefined behavior. In this case, it is just obscure code. Signed-off-by: Maksym Planeta <mplaneta@os.inf.tu-dresden.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-07RDMA/hns: Clean up unnecessary variable initializationLang Cheng4-5/+5
Here Clean up unnecessary initial value for some variable. Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-07RDMA/hns: Fixs hw access invalid dma memory errorXi Wang1-1/+0
When smmu is enable, if execute the perftest command and then use 'kill -9' to exit, follow this operation repeatedly, the kernel will have a high probability to print the following smmu event: arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received: arm-smmu-v3 arm-smmu-v3.1.auto: 0x00007d0000000010 arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000020900000080 arm-smmu-v3 arm-smmu-v3.1.auto: 0x00000000f47cf000 arm-smmu-v3 arm-smmu-v3.1.auto: 0x00000000f47cf000 This is because the hw will periodically refresh the qpc cache until the next reset. This patch fixed it by removing the action that release qpc memory in the 'hns_roce_qp_free' function. Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver") Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-07RDMA/hns: Use %pK format pointer printLang Cheng1-1/+2
The format specifier \"%p\" can leak kernel addresses. Use \"%pK\" instead. Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-07RDMA/hns: Bugfix for calculating qp buffer sizeLijun Ou1-2/+2
The buffer size of qp which used to allocate qp buffer space for storing sqwqe and rqwqe will be the length of buffer space. The kernel driver will use the buffer address and the same size to get the user memory. The same size named buff_size of qp. According the algorithm of calculating, The size of the two is not equal when users set the max sge of sq. Fixes: b28ca7cceff8 ("RDMA/hns: Limit extend sq sge num") Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/hns: Set reset flag when hw resettingLang Cheng1-0/+1
When hw resetting, there is no response from hw when driver sending cmdq. If driver still send cmdq to hw, the reset process may be blocked. So reset flag should be set to intercept the cmdq command when driver receiving "notify down" signal. Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/hns: Modify ba page size for cqeYangyang Li1-1/+1
Currently, the depth of cq only supports 64K. According to the UM, the depth of cq is up to 4M, Therefore the ba page size of cqe was modified to support the maximum specification of cq depth. Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/hns: Fixup qp release bugchenglang2-6/+3
Hip06 reserve 12 qps, Hip08 reserve 8 qps. When the QP is released, the chip model is not judged, and the Hip08 cannot release the qpn 8~12 Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/hns: Bugfix for cleaning mtrLijun Ou1-1/+1
It uses hns_roce_mtr_init in hns_roce_create_qp_common function. As a result, it should use hns_roce_mtr_cleanup function for cleaning mtr when destroying qp. Fixes: 8d18ad83f19b ("RDMA/hns: Fix bug when wqe num is larger than 16K") Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/nldev: Allow get default counter statistics through RDMA netlinkMark Zhang2-1/+103
This patch adds the ability to return the hwstats of per-port default counters (which can also be queried through sysfs nodes). Signed-off-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/nldev: Allow get counter mode through RDMA netlinkMark Zhang2-1/+78
Provide an option to get current counter mode through RDMA netlink. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/nldev: Allow counter manual mode configration through RDMA netlinkMark Zhang1-13/+98
Provide an option to allow users to manually bind a qp with a counter through RDMA netlink. Limit it to users with ADMIN capability only. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/counter: Allow manual mode configuration supportMark Zhang1-3/+216
In manual mode a QP is bound to a counter manually. If counter is not specified then a new one will be allocated. Manual mode is enabled when user binds a QP, and disabled when the last manually bound QP is unbound. When auto-mode is turned off and there are counters left, manual mode is enabled so that the user is able to access these counters. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/core: Get sum value of all counters when perform a sysfs stat readMark Zhang2-3/+96
Since a QP can only be bound to one counter, then if it is bound to a separate counter, for backward compatibility purpose, the statistic value must be: * stat of default counter + stat of all running allocated counters + stat of all deallocated counters (history stats) Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05IB/mlx5: Add counter_alloc_stats() and counter_update_stats() supportMark Zhang1-0/+23
Add support for ib callback counter_alloc_stats() and counter_update_stats(). Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/netlink: Implement counter dumpit calbackMark Zhang3-1/+240
This patch adds the ability to return all available counters together with their properties and hwstats. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/nldev: Allow counter auto mode configration through RDMA netlinkMark Zhang1-0/+78
Provide an option to enable/disable per-port counter auto mode through RDMA netlink. Limit it to users with ADMIN capability only. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05IB/mlx5: Support statistic q counter configurationMark Zhang1-0/+44
Add support for ib callbacks counter_bind_qp(), counter_unbind_qp() and counter_dealloc(). Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05IB/mlx5: Add counter set id as a parameter for mlx5_ib_query_q_counters()Mark Zhang1-5/+5
Add counter set id as a parameter so that this API can be used for querying any q counter. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05IB/mlx5: Support set qp counterMark Zhang2-2/+80
Support bind a qp with counter. If counter is null then bind the qp to the default counter. Different QP state has different operation: - RESET: Set the counter field so that it will take effective during RST2INIT change; - RTS: Issue an RTS2RTS change to update the QP counter; - Other: Set the counter field and mark the counter_pending flag, when QP is moved to RTS state and this flag is set, then issue an RTS2RTS modification to update the counter. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/counter: Add "auto" configuration mode supportMark Zhang3-0/+233
In auto mode all QPs belong to one category are bind automatically to a single counter set. Currently only "qp type" is supported. In this mode the qp counter is set in RST2INIT modification, and when a qp is destroyed the counter is unbound. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/counter: Add set/clear per-port auto mode supportMark Zhang3-1/+80
Add an API to support set/clear per-port auto mode. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/restrack: Make is_visible_in_pid_ns() as an APIMark Zhang3-13/+16
Remove is_visible_in_pid_ns() from nldev.c and make it as a restrack API, so that it can be taken advantage by other parts like counter. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/restrack: Add an API to attach a task to a resourceMark Zhang2-0/+16
Add rdma_restrack_attach_task() which is able to attach a task other then "current" to a resource. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/restrack: Introduce statistic counterMark Zhang1-5/+17
Introduce statistic counter as a new resource. It allows a user to monitor specific objects (e.g., QPs) by binding to a counter. In some cases a user counter resource is created with task other then "current", because its creation is done as part of rdmatool call. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05Merge mlx5-next into rdma for-nextJason Gunthorpe1-1/+1
From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Required for dependencies in the next patches. * mlx5-next: net/mlx5: Add rts2rts_qp_counters_set_id field in hca cap net/mlx5: Properly name the generic WQE control field net/mlx5: Introduce TLS TX offload hardware bits and structures net/mlx5: Refactor mlx5_esw_query_functions for modularity net/mlx5: E-Switch prepare functions change handler to be modular net/mlx5: Introduce and use mlx5_eswitch_get_total_vports()
2019-07-05vfs: Convert qib_fs/ipathfs to use the new mount APIDavid Howells1-9/+17
Convert the qib_fs/ipathfs filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [Q] Can qib_remove() race with qibfs_kill_super()? Should qib_super accesses be serialised with some sort of lock? [A] yes, it can and no, that's not the right solution. See vfs.git #qibfs for an old attempt to handle that cleanly. Infiniband folks were not interested... Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> cc: Mike Marciniszyn <mike.marciniszyn@intel.com> cc: linux-rdma@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-07-04Merge branch 'mlx5-next' of ↵Saeed Mahameed7-18/+22
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Misc updates from mlx5-next branch: 1) Add the required HW definitions and structures for upcoming TLS support. 2) Add support for MCQI and MCQS hardware registers for fw version query. 3) Added hardware bits and structures definitions for sub-functions 4) Small code cleanup and improvement for PF pci driver. 5) Bluefield (ECPF) updates and refactoring for better E-Switch management on ECPF embedded CPU NIC: 5.1) Consolidate querying eswitch number of VFs 5.2) Register event handler at the correct E-Switch init stage 5.3) Setup PF's inline mode and vlan pop when the ECPF is the E-Swtich manager ( the host PF is basically a VF ). 5.4) Handle Vport UC address changes in switchdev mode. 6) Cleanup the rep and netdev reference when unloading IB rep. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> i# All conflicts fixed but you are still merging.
2019-07-04RDMA/efa: Entropy in admin commands idDaniel Kranzdorf1-21/+23
Make admin commands id easier to distinguish by using relevant bits from the producer counter. This allows us to differentiate admin commands with the same producer index (happens after admin queue overlap), which is helpful when debugging. Signed-off-by: Daniel Kranzdorf <dkkranzd@amazon.com> Reviewed-by: Firas JahJah <firasj@amazon.com> Reviewed-by: Yossi Leybovich <sleybo@amazon.com> Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-04IB/ipoib: Add child to parent list only if device initializedValentine Fatiev1-14/+20
Despite failure in ipoib_dev_init() we continue with initialization flow and creation of child device. It causes to the situation where this child device is added too early to parent device list. Change the logic, so in case of failure we properly return error from ipoib_dev_init() and add child only in success path. Fixes: eaeb39842508 ("IB/ipoib: Move init code to ndo_init") Signed-off-by: Valentine Fatiev <valentinef@mellanox.com> Reviewed-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-04RDMA/mlx5: Use proper allocation API to get zeroed memoryLeon Romanovsky1-2/+1
There is no need in custom memory zeroing, because it can be done by using kzalloc from the beginning. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-04RDMA/uverbs: remove redundant assignment to variable retColin Ian King1-1/+1
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-04RDMA/hns: Fix building modular hnsLijun Ou1-2/+2
The patch below wasn't fully tested for all combinations of module and configs, and causes a compile failure: WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_ah.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_alloc.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_cmd.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_cq.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_db.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_hem.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_mr.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_pd.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_qp.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_restrack.o see include/linux/module.h for more information WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_srq.o see include/linux/module.h for more information ERROR: "hns_roce_bitmap_cleanup" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined! ERROR: "hns_roce_bitmap_init" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined! ERROR: "hns_roce_free_cmd_mailbox" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined! ERROR: "hns_roce_alloc_cmd_mailbox" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined! ERROR: "hns_roce_table_get" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined! ERROR: "hns_roce_bitmap_alloc" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined! ERROR: "hns_roce_table_find" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined! The fix is to put the module sub components in the right line. Fixes: e9816ddf2a33 ("RDMA/hns: Cleanup unnecessary exported symbols") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-03IB/mlx5: DEVX cleanup mdevYishai Hadas1-10/+8
No need any more to hold mlx5_core_dev on the devx_object, it can be accessed from ib_dev. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-03IB/mlx5: Add DEVX support for CQ eventsYishai Hadas1-0/+39
Add DEVX support for CQ events by creating and destroying the CQ via mlx5_core and set an handler to manage its completions. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-03IB/mlx5: Implement DEVX dispatching eventYishai Hadas1-3/+300
Implement DEVX dispatching event by looking up for the applicable subscriptions for the reported event and using their target fd to signal/set the event. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-03IB/mlx5: Enable subscription for device events over DEVXYishai Hadas1-7/+553
Enable subscription for device events over DEVX. Each subscription is added to the two level xarray data structure according to its event number and the DEVX object information in case was given with the given target fd. Those events will be reported over the given fd once will occur. Downstream patches will mange the dispatching to any subscription. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-03IB/mlx5: Register DEVX with mlx5_core to get async eventsYishai Hadas3-2/+48
Register DEVX with with mlx5_core to get async events. This will enable to dispatch the applicable events to its consumers in down stream patches. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-03IB/mlx5: Introduce MLX5_IB_OBJECT_DEVX_ASYNC_EVENT_FDYishai Hadas1-0/+95
Introduce MLX5_IB_OBJECT_DEVX_ASYNC_EVENT_FD and its initial implementation. This object is from type class FD and will be used to read DEVX async events. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-03net/mlx5: Introduce and use mlx5_eswitch_get_total_vports()Parav Pandit1-1/+1
Instead MLX5_TOTAL_VPORTS, use mlx5_eswitch_get_total_vports(). mlx5_eswitch_get_total_vports() in subsequent patch accounts for SF vports as well. Expanding MLX5_TOTAL_VPORTS macro would require exposing SF internals to more generic vport.h header file. Such exposure is not desired. Hence a mlx5_eswitch_get_total_vports() is introduced. Given that mlx5_eswitch_get_total_vports() API wants to work on const mlx5_core_dev*, change its helper functions also to accept const *dev. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-03Merge mlx5-next into rdma for-nextJason Gunthorpe10-70/+103
From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Required for dependencies in the next patches. Resolved the conflicts: - esw_destroy_offloads_acl_tables() use the newer mlx5_esw_for_all_vports() version - esw_offloads_steering_init() drop the cap test - esw_offloads_init() drop the extra function arguments * branch 'mlx5-next': (39 commits) net/mlx5: Expose device definitions for object events net/mlx5: Report EQE data upon CQ completion net/mlx5: Report a CQ error event only when a handler was set net/mlx5: mlx5_core_create_cq() enhancements net/mlx5: Expose the API to register for ANY event net/mlx5: Use event mask based on device capabilities net/mlx5: Fix mlx5_core_destroy_cq() error flow net/mlx5: E-Switch, Handle UC address change in switchdev mode net/mlx5: E-Switch, Consider host PF for inline mode and vlan pop net/mlx5: E-Switch, Use iterator for vlan and min-inline setups net/mlx5: E-Switch, Reg/unreg function changed event at correct stage net/mlx5: E-Switch, Consolidate eswitch function number of VFs net/mlx5: E-Switch, Refactor eswitch SR-IOV interface net/mlx5: Handle host PF vport mac/guid for ECPF net/mlx5: E-Switch, Use correct flags when configuring vlan net/mlx5: Reduce dependency on enabled_vfs counter and num_vfs net/mlx5: Don't handle VF func change if host PF is disabled net/mlx5: Limit scope of mlx5_get_next_phys_dev() to PCI PF devices net/mlx5: Move pci status reg access mutex to mlx5_pci_init net/mlx5: Rename mlx5_pci_dev_type to mlx5_coredev_type ... Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-03IB/mlx5: Fixed reporting counters on 2nd port for Dual port RoCEParav Pandit1-24/+36
Currently during dual port IB device registration in below code flow, ib_register_device() ib_device_register_sysfs() ib_setup_port_attrs() add_port() get_counter_table() get_perf_mad() process_mad() mlx5_ib_process_mad() mlx5_ib_process_mad() fails on 2nd port when both the ports are not fully setup at the device level (because 2nd port is unaffiliated). As a result, get_perf_mad() registers different PMA counter group for 1st and 2nd port, namely pma_counter_ext and pma_counter. However both ports have the same capability and counter offsets. Due to this when counters are read by the user via sysfs in below code flow, counters are queried from wrong location from the device mainly from PPCNT instead of VPORT counters. show_pma_counter() get_perf_mad() process_mad() mlx5_ib_process_mad() process_pma_cmd() This shows all zero counters for 2nd port. To overcome this, process_pma_cmd() is invoked, and when unaffiliated port is not yet setup during device registration phase, make the query on the first port. while at it, only process_pma_cmd() needs to work on the native port number and underlying mdev, so shift the get, put calls to where its needed inside process_pma_cmd(). Fixes: 212f2a87b74f ("IB/mlx5: Route MADs for dual port RoCE") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-22 23:49:04 +0300