| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Doug and I are at a conference next week so if another PR is sent I
expect it to only be bug fixes. Parav noted yesterday that there are
some fringe case behavior changes in his work that he would like to
fix, and I see that Intel has a number of rc looking patches for HFI1
they posted yesterday.
Parav is again the biggest contributor by patch count with his ongoing
work to enable container support in the RDMA stack, followed by Leon
doing syzkaller inspired cleanups, though most of the actual fixing
went to RC.
There is one uncomfortable series here fixing the user ABI to actually
work as intended in 32 bit mode. There are lots of notes in the commit
messages, but the basic summary is we don't think there is an actual
32 bit kernel user of drivers/infiniband for several good reasons.
However we are seeing people want to use a 32 bit user space with 64
bit kernel, which didn't completely work today. So in fixing it we
required a 32 bit rxe user to upgrade their userspace. rxe users are
still already quite rare and we think a 32 bit one is non-existing.
- Fix RDMA uapi headers to actually compile in userspace and be more
complete
- Three shared with netdev pull requests from Mellanox:
* 7 patches, mostly to net with 1 IB related one at the back).
This series addresses an IRQ performance issue (patch 1),
cleanups related to the fix for the IRQ performance problem
(patches 2-6), and then extends the fragmented completion queue
support that already exists in the net side of the driver to the
ib side of the driver (patch 7).
* Mostly IB, with 5 patches to net that are needed to support the
remaining 10 patches to the IB subsystem. This series extends
the current 'representor' framework when the mlx5 driver is in
switchdev mode from being a netdev only construct to being a
netdev/IB dev construct. The IB dev is limited to raw Eth queue
pairs only, but by having an IB dev of this type attached to the
representor for a switchdev port, it enables DPDK to work on the
switchdev device.
* All net related, but needed as infrastructure for the rdma
driver
- Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers
- SRP performance updates
- IB uverbs write path cleanup patch series from Leon
- Add RDMA_CM support to ib_srpt. This is disabled by default. Users
need to set the port for ib_srpt to listen on in configfs in order
for it to be enabled
(/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)
- TSO and Scatter FCS support in mlx4
- Refactor of modify_qp routine to resolve problems seen while
working on new code that is forthcoming
- More refactoring and updates of RDMA CM for containers support from
Parav
- mlx5 'fine grained packet pacing', 'ipsec offload' and 'device
memory' user API features
- Infrastructure updates for the new IOCTL interface, based on
increased usage
- ABI compatibility bug fixes to fully support 32 bit userspace on 64
bit kernel as was originally intended. See the commit messages for
extensive details
- Syzkaller bugs and code cleanups motivated by them"
* tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (199 commits)
IB/rxe: Fix for oops in rxe_register_device on ppc64le arch
IB/mlx5: Device memory mr registration support
net/mlx5: Mkey creation command adjustments
IB/mlx5: Device memory support in mlx5_ib
net/mlx5: Query device memory capabilities
IB/uverbs: Add device memory registration ioctl support
IB/uverbs: Add alloc/free dm uverbs ioctl support
IB/uverbs: Add device memory capabilities reporting
IB/uverbs: Expose device memory capabilities to user
RDMA/qedr: Fix wmb usage in qedr
IB/rxe: Removed GID add/del dummy routines
RDMA/qedr: Zero stack memory before copying to user space
IB/mlx5: Add ability to hash by IPSEC_SPI when creating a TIR
IB/mlx5: Add information for querying IPsec capabilities
IB/mlx5: Add IPsec support for egress and ingress
{net,IB}/mlx5: Add ipsec helper
IB/mlx5: Add modify_flow_action_esp verb
IB/mlx5: Add implementation for create and destroy action_xfrm
IB/uverbs: Introduce ESP steering match filter
IB/uverbs: Add modify ESP flow_action
...
|
|
On ppc64le arch rxe_add command causes oops in kernel log:
[ 92.495140] Oops: Kernel access of bad area, sig: 11 [#1]
[ 92.499710] SMP NR_CPUS=2048 NUMA pSeries
[ 92.499792] Modules linked in: ipt_MASQUERADE(E) nf_nat_masquerade_ipv4(E) nf_conntrack_netlink(E) nfnetlink(E) xfrm_user(E) iptable
_nat(E) nf_conntrack_ipv4(E) nf_defrag_ipv4(E) nf_nat_ipv4(E) xt_addrtype(E) iptable_filter(E) ip_tables(E) xt_conntrack(E) x_tables(E)
nf_nat(E) nf_conntrack(E) br_netfilter(E) bridge(E) stp(E) llc(E) overlay(E) af_packet(E) rpcrdma(E) ib_isert(E) iscsi_target_mod(E) i
b_iser(E) libiscsi(E) ib_srpt(E) target_core_mod(E) ib_srp(E) ib_ipoib(E) rdma_ucm(E) ib_ucm(E) ib_uverbs(E) ib_umad(E) bochs_drm(E) tt
m(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) drm(E) agpgart(E) virtio_rng(E) virtio_console(E) rtc_
generic(E) dm_ec(OEN) ttln_rdma(OEN) rdma_cm(E) configfs(E) iw_cm(E) ib_cm(E) rdma_rxe(E) ip6_udp_tunnel(E) udp_tunnel(E) ib_core(E) ql
a2xxx(E)
[ 92.499832] scsi_transport_fc(E) nvme_fc(E) nvme_fabrics(E) nvme_core(E) ipmi_watchdog(E) ipmi_ssif(E) ipmi_poweroff(E) ipmi_powernv(EX) ipmi_devintf(E) ipmi_msghandler(E) dummy(E) ext4(E) crc16(E) jbd2(E) mbcache(E) dm_service_time(E) scsi_transport_iscsi(E) sd_mod(E) sr_mod(E) cdrom(E) hid_generic(E) usbhid(E) virtio_blk(E) virtio_scsi(E) virtio_net(E) ibmvscsi(EX) scsi_transport_srp(E) xhci_pci(E) xhci_hcd(E) usbcore(E) usb_common(E) virtio_pci(E) virtio_ring(E) virtio(E) sunrpc(E) dm_mirror(E) dm_region_hash(E) dm_log(E) sg(E) dm_multipath(E) dm_mod(E) scsi_dh_rdac(E) scsi_dh_emc(E) scsi_dh_alua(E) scsi_mod(E) autofs4(E)
[ 92.499834] Supported: No, Unsupported modules are loaded
[ 92.499839] CPU: 3 PID: 5576 Comm: sh Tainted: G OE NX 4.4.120-ttln.17-default #1
[ 92.499841] task: c0000000afe8a490 ti: c0000000beba8000 task.ti: c0000000beba8000
[ 92.499842] NIP: c00000000008ba3c LR: c000000000027644 CTR: c00000000008ba10
[ 92.499844] REGS: c0000000bebab750 TRAP: 0300 Tainted: G OE NX (4.4.120-ttln.17-default)
[ 92.499850] MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 28424428 XER: 20000000
[ 92.499871] CFAR: 0000000000002424 DAR: 0000000000000208 DSISR: 40000000 SOFTE: 1
GPR00: c000000000027644 c0000000bebab9d0 c000000000f09700 0000000000000000
GPR04: d0000000043d7192 0000000000000002 000000000000001a fffffffffffffffe
GPR08: 000000000000009c c00000000008ba10 d0000000043e5848 d0000000043d3828
GPR12: c00000000008ba10 c000000007a02400 0000000010062e38 0000010020388860
GPR16: 0000000000000000 0000000000000000 00000100203885f0 00000000100f6c98
GPR20: c0000000b3f1fcc0 c0000000b3f1fc48 c0000000b3f1fbd0 c0000000b3f1fb58
GPR24: c0000000b3f1fae0 c0000000b3f1fa68 00000000000005dc c0000000b3f1f9f0
GPR28: d0000000043e5848 c0000000b3f1f900 c0000000b3f1f320 c0000000b3f1f000
[ 92.499881] NIP [c00000000008ba3c] dma_get_required_mask_pSeriesLP+0x2c/0x1a0
[ 92.499885] LR [c000000000027644] dma_get_required_mask+0x44/0xac
[ 92.499886] Call Trace:
[ 92.499891] [c0000000bebab9d0] [c0000000bebaba30] 0xc0000000bebaba30 (unreliable)
[ 92.499894] [c0000000bebaba10] [c000000000027644] dma_get_required_mask+0x44/0xac
[ 92.499904] [c0000000bebaba30] [d0000000043cb4b4] rxe_register_device+0xc4/0x430 [rdma_rxe]
[ 92.499910] [c0000000bebabab0] [d0000000043c06c8] rxe_add+0x448/0x4e0 [rdma_rxe]
[ 92.499915] [c0000000bebabb30] [d0000000043d28dc] rxe_net_add+0x4c/0xf0 [rdma_rxe]
[ 92.499921] [c0000000bebabb60] [d0000000043d305c] rxe_param_set_add+0x6c/0x1ac [rdma_rxe]
[ 92.499924] [c0000000bebabbf0] [c0000000000e78c0] param_attr_store+0xa0/0x180
[ 92.499927] [c0000000bebabc70] [c0000000000e6448] module_attr_store+0x48/0x70
[ 92.499932] [c0000000bebabc90] [c000000000391f60] sysfs_kf_write+0x70/0xb0
[ 92.499935] [c0000000bebabcb0] [c000000000390f1c] kernfs_fop_write+0x18c/0x1e0
[ 92.499939] [c0000000bebabd00] [c0000000002e22ac] __vfs_write+0x4c/0x1d0
[ 92.499942] [c0000000bebabd90] [c0000000002e2f94] vfs_write+0xc4/0x200
[ 92.499945] [c0000000bebabde0] [c0000000002e488c] SyS_write+0x6c/0x110
[ 92.499948] [c0000000bebabe30] [c000000000009384] system_call+0x38/0xe4
[ 92.499949] Instruction dump:
[ 92.499954] 4e800020 3c4c00e8 3842dcf0 7c0802a6 f8010010 60000000 7c0802a6 fba1ffe8
[ 92.499958] fbc1fff0 fbe1fff8 f8010010 f821ffc1 <e9230208> 7c7e1b78 2fa90000 419e0078
[ 92.499962] ---[ end trace bed077e15eb420cf ]---
It fails in dma_get_required_mask, that has ppc-specific implementation,
and fail if provided device argument is NULL
Signed-off-by: Mikhail Malygin <mikhail@malygin.me>
Reviewed-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Adding mlx5_ib driver implementation for reg_dm_mr callback
which allows registering device memory (DM) as an MR for
local and remote access.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This change updates the mlx5 interface to create mkey
on the device.
The updates in the command mailbox include increasing the
access mode type field to 5 bits in order to support additional
types such as MLX5_MKC_ACCESS_MODE_MEMIC which represents device
memory access type and will be used when registering MR on allocated
device memory.
All the places that use the old access mode format are adjusted as
well.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch adds the mlx5_ib driver implementation for the device
memory allocation API.
It implements the ib_device callbacks for allocation and deallocation
operations as well as a new mmap command support which allows mapping
an allocated device memory to a VMA.
The change also adds reporting of device memory maximum size and
alignment parameters reported in device capabilities.
The allocation/deallocation operations are using new firmware
commands to allocate MEMIC memory on the device.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Adding new ioctl method for the MR object - REG_DM_MR.
This command can be used by users to register an allocated
device memory buffer as an MR and receive lkey and rkey
to be used within work requests.
It is added as a new method under the MR object and using a new
ib_device callback - reg_dm_mr.
The command creates a standard ib_mr object which represents the
registered memory.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This change adds uverbs support for allocation/freeing
of device memory commands.
A new uverbs object is defined of type idr to represent
and track the new resource type allocation per context.
The API requires provider driver to implement 2 new ib_device
callbacks - one for allocation and one for deallocation which
return and accept (respectively) the ib_dm object which represents
the allocated memory on the device.
The support is added via the ioctl command infrastructure
only.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This change allows vendors to report device memory capability
max_dm_size - to user via uverbs command.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch comes as a result of Sinan Kaya's work and the decision that
writel() must be a strong enough barrier for DMA.
wmb usages in qedr driver have either been removed where they were there
only to order DMA accesses, and replaced with smp_wmb and comments for the
places that the barrier was there for SMP reasons.
Fixes: 561e5d48968b ("RDMA/qedr: eliminate duplicate barriers on weakly-ordered archs")
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
rxe driver's add_gid() and del_gid() callbacks are doing simple
checks which are already done by the ib core before invoking these
callback routines.
Therefore, code is simplified to skip implementing add_gid() and
del_gid() callback functions.
They are only invoked by ib_core if they are implemented.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The fact this struct was not init'd like all the others was missed when
the padding reserved field was added.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 71e80a4781af ("RDMA/qedr: Fix uABI structure layouts for 32/64 compat")
Acked-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
When a Raw Ethernet QP is created, we actually create a few objects.
One of these objects is a TIR. Currently, a TIR could hash (and spread
the traffic) by IP or port only. Adding a hashing by IPSec SPI to TIR
creation with the required UAPI bit.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Users should be able to query for IPSec support. Adding a few
capabilities bits as part of the driver specific part in
alloc_ucontext:
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_REQ_METADATA
Payload's header is returned with metadata representing the
IPSec decryption state.
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_RX
Support ESP_AES_GCM in ingress path.
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_TX
Support ESP_AES_GCM in egress path.
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_SPI_RSS_ONLY
Hardware doesn't support matching SPI in flow steering rules
but just hashing and spreading the traffic accordingly.
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This commit introduces support for the esp_aes_gcm flow
specification for the Innova device. To that end we add
support for egress steering and some validations that an
IPsec rule is indeed valid.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Adding implementation in mlx5 driver to modify action_xfrm object. This
merely call the accel layer. Currently a user can modify only the
ESN parameters.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Adding implementation in mlx5 driver to create and destroy action_xfrm
object. This merely call the accel layer.
A user may pass MLX5_IB_XFRM_FLAGS_REQUIRE_METADATA flag which states
that [s]he expects a metadata header to be added to the payload. This
header represents information regarding the transformation's state.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Adding a new ESP steering match filter that could match against
spi and seq used in IPSec protocol.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
flow_actions of ESP type could be modified during runtime. This could be
common for example when ESN should be changed. Adding a new
UVERBS_FLOW_ACTION_ESP_MODIFY method for changing ESP parameters of an
existing ESP flow_action.
The new method uses the UVERBS_FLOW_ACTION_ESP_CREATE attributes, but
adds a new IB_FLOW_ACTION_ESP_FLAGS_MOD_ESP_ATTRS which means ESP_ATTRS
should be changed.
In addition, we add a new FLOW_ACTION_ESP_REPLAY_NONE replay type that
could be used when one wants to disable a replay protection over a
specific flow_action.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Binding a flow_action to flow steering rule requires using a new
specification. Therefore, adding such an IB_FLOW_SPEC_ACTION_HANDLE flow
specification.
Flow steering rules could use flow_action(s) and as of that we need to
avoid deleting flow_action(s) as long as they're being used.
Moreover, when the attached rules are deleted, action_handle reference
count should be decremented. Introducing a new mechanism of flow
resources to keep track on the attached action_handle(s). Later on, this
mechanism should be extended to other attached flow steering resources
like flow counters.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
A verbs application may receive and transmits packets using a data
path pipeline. Sometimes, the first stage in the receive pipeline or
the last stage in the transmit pipeline involves transforming a
packet, either in order to make it easier for later stages to process
it or to prepare it for transmission over the wire. Such transformation
could be stripping/encapsulating the packet (i.e. vxlan),
decrypting/encrypting it (i.e. ipsec), altering headers, doing some
complex FPGA changes, etc.
Some hardware could do such transformations without software data path
intervention at all. The flow steering API supports steering a
packet (either to a QP or dropping it) and some simple packet
immutable actions (i.e. tagging a packet). Complex actions, that may
change the packet, could bloat the flow steering API extensively.
Sometimes the same action should be applied to several flows.
In this case, it's easier to bind several flows to the same action and
modify it than change all matching flows.
Introducing a new flow_action object that abstracts any packet
transformation (out of a standard and well defined set of actions).
This flow_action object could be tied to a flow steering rule via a
new specification.
Currently, we support esp flow_action, which encrypts or decrypts a
packet according to the given parameters. However, we present a
flexible schema that could be used to other transformation actions tied
to flow rules.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The current implementation of kern_spec_to_ib_spec_filter, which takes
a uAPI based flow steering specification and creates the respective kernel
API flow steering structure, gets a ib_uverbs_flow_spec structure.
The new flow_action uAPI gets a match mask and filter from user-space
which aren't encoded in the flow steering's ib_uverbs_flow_spec structure.
Exporting the logic out of kern_spec_to_ib_spec_filter to get user-space
blobs rather than ib_uverbs_flow_spec structure.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
ConnectX3 doesn't support egress flow steering. Return an EOPNOTSUPP
error when such a flow is being created.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Aviad Yehezkel <aviadye@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Methods sometimes need to get one attribute out of a group of
pre-defined attributes. This is an enum-like behavior. Since
this is a common requirement, we add a new ENUM attribute to the
generic uverbs ioctl() layer. This attribute is embedded in methods,
like any other attributes we currently have. ENUM attributes point to
an array of standard UVERBS_ATTR_PTR_IN. The user-space encodes the
enum's attribute id in the id field and the internal PTR_IN attr id in
the enum_data.elem_id field. This ENUM attribute could be shared by
several attributes and it can get UVERBS_ATTR_SPEC_F_MANDATORY flag,
stating this attribute must be supported by the kernel, like any other
attribute.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
In order to have a custom parsing tree, a provider driver needs to
assign its parsing tree to ib_device specs_tree field. Otherwise, the
uverbs client assigns a common default parsing tree for it.
In downstream patches, the mlx5_ib driver gains a custom parsing tree,
which contains both the common objects and a new flags field for the
UVERBS_FLOW_ACTION_ESP_CREATE command.
This patch makes mlx5_ib assign its own tree to specs_root, which
later on will be extended.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Now that ib_gid_attr contains device, port and index, simplify the
provider APIs add_gid() and del_gid() to use device, port and index
fields from the ib_gid_attr attributes structure.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Now that IB core GID cache ensures that all RoCE entries have an
associated netdev remove null checks from the provider drivers for
clarity.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Now that the IB core GID cache ensures that a zero GID doesn't exist in
the GID table remove zero GID checks from the provider drivers for
clarity.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Code is refactored to prepare separate functions for RoCE which can do more
complex operations related to reference counting, while still
maintainining code readability. This includes
(a) Simplification to not perform netdevice checks and modifications
for IB link layer.
(b) Do not add RoCE GID entry which has NULL netdevice; instead return
an error.
(c) If GID addition fails at provider level add_gid(), do not add the
entry in the cache and keep the entry marked as INVALID.
(d) Simplify and reuse the ib_cache_gid_add()/del() routines so that they
can be used even for modifying default GIDs. This avoid some code
duplication in modifying default GIDs.
(e) find_gid() routine refers to the data entry flags to qualify a GID
as valid or invalid GID rather than depending on attributes and zeroness
of the GID content.
(f) gid_table_reserve_default() sets the GID default attribute at
beginning while setting up the GID table. There is no need to use
default_gid flag in low level functions such as write_gid(), add_gid(),
del_gid(), as they never need to update the DEFAULT property of the GID
entry while during GID table update.
As as result of this refactor, reserved GID 0:0:0:0:0:0:0:0 is no longer
searchable as described below.
A unicast GID entry of 0:0:0:0:0:0:0:0 is Reserved GID as per the IB
spec version 1.3 section 4.1.1, point (6) whose snippet is below.
"The unicast GID address 0:0:0:0:0:0:0:0 is reserved - referred to as
the Reserved GID. It shall never be assigned to any endport. It shall
not be used as a destination address or in a global routing header
(GRH)."
GID table cache now only stores valid GID entries. Before this patch,
Reserved GID 0:0:0:0:0:0:0:0 was searchable in the GID table using
ib_find_cached_gid_by_port() and other similar find routines.
Zero GID is no longer searchable as it shall not to be present in GRH or
path recored entry as described in IB spec version 1.3 section 4.1.1,
point (6), section 12.7.10 and section 12.7.20.
ib_cache_update() is simplified to check link layer once, use unified
locking scheme for all link layers, removed temporary gid table
allocation/free logic.
Additionally,
(a) Expand ib_gid_attr to store port and index so that GID query
routines can get port and index information from the attribute structure.
(b) Expand ib_gid_attr to store device as well so that in future code when
GID reference counting is done, device is used to reach back to the GID
table entry.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Currently following inconsistencies exist.
1. ib_query_gid() returns GID from the software cache for a RoCE port
and returns GID from the HCA for an IB port.
This is incorrect because software GID cache is maintained regardless
of HCA port type.
2. GID is queries from the HCA via ib_query_gid and updated in the
software cache for IB link layer. Both of them might not be in sync.
ULPs such as SRP initiator, SRP target, IPoIB driver have historically
used ib_query_gid() API to query the GID. However CM used cached version
during CM processing, When software cache was introduced, this
inconsitency remained.
In order to simplify, improve readability and avoid link layer
specific above inconsistencies, this patch brings following changes.
1. ib_query_gid() always refers to the cache layer regardless of link
layer.
2. cache module who reads the GID entry from HCA and builds the cache,
directly invokes the HCA provider verb's query_gid() callback function.
3. ib_query_port() is being called in early stage where GID cache is not
yet build while reading port immutable property. Therefore it needs to
read the default GID from the HCA for IB link layer to publish the
subnet prefix.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
ib_query_gid() fetches the GID from the software cache maintained in
ib_core for RoCE ports.
Therefore, simplify the provider drivers for RoCE to treat query_gid()
callback as never called for RoCE, and only require non-RoCE devices to
implement it.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Check to make sure that ctx->cm_id->device is set before we use it.
Otherwise userspace can trigger a NULL dereference by doing
RDMA_USER_CM_CMD_SET_OPTION on an ID that is not bound to a device.
Cc: <stable@vger.kernel.org>
Reported-by: <syzbot+a67bc93e14682d92fc2f@syzkaller.appspotmail.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
qedr driver's add_gid() and del_gid() callbacks are doing simple
checks which are already done by the ib core before invoking these
callback routines.
Therefore, code is simplified to skip implementing add_gid() and
del_gid() callback functions.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Support for resource profile 1 is currenlty deprecated due to
a pre-production errata. Remove this workaround as its no longer
needed.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This structure is pushed down the ex and the non-ex path, so it needs to be
aligned to 8 bytes to go through ex without implicit padding.
Old user space will provide 4 bytes of resp on !ex and 8 bytes on ex, so
take the approach of just copying the minimum length.
New user space will consistently provide 8 bytes in both cases.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Check on return values and goto label mbx_err are unnecessary.
Addresses-Coverity-ID: 1271151 ("Identical code for different branches")
Addresses-Coverity-ID: 1268788 ("Identical code for different branches")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This structure is not needed since the introduction of commit
'c42687784b9a ("IB/ipoib: Scatter-Gather support in connected mode")'
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c,
we had some overlapping changes:
1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE -->
MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE
2) In 'net-next' params->log_rq_size is renamed to be
params->log_rq_mtu_frames.
3) In 'net-next' params->hard_mtu is added.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-03-31
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add raw BPF tracepoint API in order to have a BPF program type that
can access kernel internal arguments of the tracepoints in their
raw form similar to kprobes based BPF programs. This infrastructure
also adds a new BPF_RAW_TRACEPOINT_OPEN command to BPF syscall which
returns an anon-inode backed fd for the tracepoint object that allows
for automatic detach of the BPF program resp. unregistering of the
tracepoint probe on fd release, from Alexei.
2) Add new BPF cgroup hooks at bind() and connect() entry in order to
allow BPF programs to reject, inspect or modify user space passed
struct sockaddr, and as well a hook at post bind time once the port
has been allocated. They are used in FB's container management engine
for implementing policy, replacing fragile LD_PRELOAD wrapper
intercepting bind() and connect() calls that only works in limited
scenarios like glibc based apps but not for other runtimes in
containerized applications, from Andrey.
3) BPF_F_INGRESS flag support has been added to sockmap programs for
their redirect helper call bringing it in line with cls_bpf based
programs. Support is added for both variants of sockmap programs,
meaning for tx ULP hooks as well as recv skb hooks, from John.
4) Various improvements on BPF side for the nfp driver, besides others
this work adds BPF map update and delete helper call support from
the datapath, JITing of 32 and 64 bit XADD instructions as well as
offload support of bpf_get_prandom_u32() call. Initial implementation
of nfp packet cache has been tackled that optimizes memory access
(see merge commit for further details), from Jakub and Jiong.
5) Removal of struct bpf_verifier_env argument from the print_bpf_insn()
API has been done in order to prepare to use print_bpf_insn() soon
out of perf tool directly. This makes the print_bpf_insn() API more
generic and pushes the env into private data. bpftool is adjusted
as well with the print_bpf_insn() argument removal, from Jiri.
6) Couple of cleanups and prep work for the upcoming BTF (BPF Type
Format). The latter will reuse the current BPF verifier log as
well, thus bpf_verifier_log() is further generalized, from Martin.
7) For bpf_getsockopt() and bpf_setsockopt() helpers, IPv4 IP_TOS read
and write support has been added in similar fashion to existing
IPv6 IPV6_TCLASS socket option we already have, from Nikita.
8) Fixes in recent sockmap scatterlist API usage, which did not use
sg_init_table() for initialization thus triggering a BUG_ON() in
scatterlist API when CONFIG_DEBUG_SG was enabled. This adds and
uses a small helper sg_init_marker() to properly handle the affected
cases, from Prashant.
9) Let the BPF core follow IDR code convention and therefore use the
idr_preload() and idr_preload_end() helpers, which would also help
idr_alloc_cyclic() under GFP_ATOMIC to better succeed under memory
pressure, from Shaohua.
10) Last but not least, a spelling fix in an error message for the
BPF cookie UID helper under BPF sample code, from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull rdma fixes from Jason Gunthorpe:
"It has been fairly silent lately on our -rc front. Big queue of
patches on the mailing list going to for-next though.
Bug fixes:
- qedr driver bugfixes causing application hangs, wrong uapi errnos,
and a race condition
- three syzkaller found bugfixes in the ucma uapi
Regression fixes for things introduced in 4.16:
- Crash on error introduced in mlx5 UMR flow
- Crash on module unload/etc introduced by bad interaction of
restrack and mlx5 patches this cycle
- Typo in a two line syzkaller bugfix causing a bad regression
- Coverity report of nonsense code in hns driver"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/ucma: Introduce safer rdma_addr_size() variants
RDMA/hns: ensure for-loop actually iterates and free's buffers
RDMA/ucma: Check that device exists prior to accessing it
RDMA/ucma: Check that device is connected prior to access it
RDMA/rdma_cm: Fix use after free race with process_one_req
RDMA/qedr: Fix QP state initialization race
RDMA/qedr: Fix rc initialization on CNQ allocation failure
RDMA/qedr: fix QP's ack timeout configuration
RDMA/ucma: Correct option size check using optlen
RDMA/restrack: Move restrack_clean to be symmetrical to restrack_init
IB/mlx5: Don't clean uninitialized UMR resources
|
|
c4iw_ep_common structure holds the mapped addresses, so while printing
them, use appropriate pointers.
Fixes: bab572f1d ("iw_cxgb4: Guard against null cm_id in dump_ep/qp")
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
rdma_cm_state enum is internal to rdma_cm kernel module.
It is not required to expose state enums to ULP modules.
So lets keep its scope limited to rdma_cm module in cma_priv.h file.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Make dst_entry pointer as const struct dst_entry* to improve code
readablity to make sure that dst structure fields are not modified by
various functions which are using it.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This is already used in many places, get the rest of them too, only
to make the code a bit clearer & simpler.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Export the net device name and index to easily find connection
between IB devices and relevant net devices.
We also updated the comment regarding the devices without FW.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
In mcast recv process, the function skb_clone is used. In fact,
the refcount can be increased to replace cloning a new skb since
the original skb will not be modified before it is freed.
This can make the performance better and save the memory.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Trivial fix to spelling mistake in DP_ERR message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This FW contains several fixes and features
RDMA Features
- SRQ support
- XRC support
- Memory window support
- RDMA low latency queue support
- RDMA bonding support
RDMA bug fixes
- RDMA remote invalidate during retransmit fix
- iWARP MPA connect interop issue with RTR fix
- iWARP Legacy DPM support
- Fix MPA reject flow
- iWARP error handling
- RQ WQE validation checks
MISC
- Fix some HSI types endianity
- New Restriction: vlan insertion in core_tx_bd_data can't be set
for LB packets
ETH
- HW QoS offload support
- Fix vlan, dcb and sriov flow of VF sending a packet with
inband VLAN tag instead of default VLAN
- Allow GRE version 1 offloads in RX flow
- Allow VXLAN steering
iSCSI / FcoE
- Fix bd availability checking flow
- Support 256th sge proerly in iscsi/fcoe retransmit
- Performance improvement
- Fix handle iSCSI command arrival with AHS and with immediate
- Fix ipv6 traffic class configuration
DEBUG
- Update debug utilities
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2018-03-27 (Misc updates & SQ recovery)
This series contains Misc updates and cleanups for mlx5e rx path
and SQ recovery feature for tx path.
From Tariq: (RX updates)
- Disable Striding RQ when PCI devices, striding RQ limits the use
of CQE compression feature, which is very critical for slow PCI
devices performance, in this change we will prefer CQE compression
over Striding RQ only on specific "slow" PCIe links.
- RX path cleanups
- Private flag to enable/disable striding RQ
From Eran: (TX fast recovery)
- TX timeout logic improvements, fast SQ recovery and TX error reporting
if a HW error occurs while transmitting on a specific SQ, the driver will
ignore such error and will wait for TX timeout to occur and reset all
the rings. Instead, the current series improves the resiliency for such
HW errors by detecting TX completions with errors, which will report them
and perform a fast recover for the specific faulty SQ even before a TX
timeout is detected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rtnl_lock() is used everywhere, and contention is very high.
When someone wants to iterate over alive net namespaces,
he/she has no a possibility to do that without exclusive lock.
But the exclusive rtnl_lock() in such places is overkill,
and it just increases the contention. Yes, there is already
for_each_net_rcu() in kernel, but it requires rcu_read_lock(),
and this can't be sleepable. Also, sometimes it may be need
really prevent net_namespace_list growth, so for_each_net_rcu()
is not fit there.
This patch introduces new rw_semaphore, which will be used
instead of rtnl_mutex to protect net_namespace_list. It is
sleepable and allows not-exclusive iterations over net
namespaces list. It allows to stop using rtnl_lock()
in several places (what is made in next patches) and makes
less the time, we keep rtnl_mutex. Here we just add new lock,
while the explanation of we can remove rtnl_lock() there are
in next patches.
Fine grained locks generally are better, then one big lock,
so let's do that with net_namespace_list, while the situation
allows that.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the rdma_port_space enum is being passed between user and kernel for
user cm_id setup, we need it in a UAPI header. So add it to
rdma_user_cm.h.
This also fixes the cm_id restrack changes which pass up the port space
value via the RDMA_NLDEV_ATTR_RES_PS attribute.
Fixes: 00313983cda6 ("RDMA/nldev: provide detailed CM_ID information")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
