Age | Commit message (Collapse) | Author | Files | Lines |
|
[ Upstream commit 10467ce09fefa2e74359f5b2ab1efb8909402f19 ]
Completion events (CEs) are lost if the application is allowed to arm the
CQ more than two times when no new CE for this CQ has been generated by
the HW.
Check if arming has been done for the CQ and if not, arm the CQ for any
event otherwise promote to arm the CQ for any event only when the last arm
event was solicited.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20211201231509.1930-2-shiraz.saleem@intel.com
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 25b5d6fd6d13b2de3780a0ae247befc43c4576fe ]
Return IBV_WC_REM_OP_ERR for responder QP errors instead of
IBV_WC_REM_ACCESS_ERR.
Return IBV_WC_LOC_QP_OP_ERR for errors detected on the SQ with bad opcodes
Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Link: https://lore.kernel.org/r/20211201231509.1930-1-shiraz.saleem@intel.com
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
'irdma_prm_add_pble_mem()'
[ Upstream commit 117697cc935b0ab04ec66274d8e64ccfebd7d0d2 ]
'pchunk->bitmapbuf' is a bitmap. Its size (in number of bits) is stored in
'pchunk->sizeofbitmap'.
When it is allocated, the size (in bytes) is computed by:
size_in_bits >> 3
There are 2 issues (numbers bellow assume that longs are 64 bits):
- there is no guarantee here that 'pchunk->bitmapmem.size' is modulo
BITS_PER_LONG but bitmaps are stored as longs
(sizeofbitmap=8 bits will only allocate 1 byte, instead of 8 (1 long))
- the number of bytes is computed with a shift, not a round up, so we
may allocate less memory than needed
(sizeofbitmap=65 bits will only allocate 8 bytes (i.e. 1 long), when 2
longs are needed = 16 bytes)
Fix both issues by using 'bitmap_zalloc()' and remove the useless
'bitmapmem' from 'struct irdma_chunk'.
While at it, remove some useless NULL test before calling
kfree/bitmap_free.
Fixes: 915cc7ac0f8e ("RDMA/irdma: Add miscellaneous utility definitions")
Link: https://lore.kernel.org/r/5e670b640508e14b1869c3e8e4fb970d78cbe997.1638692171.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1e11a39a82e95ce86f849f40dda0d9c0498cebd9 ]
When irdma_hmc_sd_one fails, 'chunk' is freed while its still on the PBLE
info list.
Add the chunk entry to the PBLE info list only after successful setting of
the SD in irdma_hmc_sd_one.
Fixes: e8c4dbc2fcac ("RDMA/irdma: Add PBLE resource manager")
Link: https://lore.kernel.org/r/20211207152135.2192-1-shiraz.saleem@intel.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f0ae4afe3d35e67db042c58a52909e06262b740f ]
For the case of IB_MR_TYPE_DM the mr does doesn't have a umem, even though
it is a user MR. This causes function mlx5_free_priv_descs() to think that
it is a kernel MR, leading to wrongly accessing mr->descs that will get
wrong values in the union which leads to attempt to release resources that
were not allocated in the first place.
For example:
DMA-API: mlx5_core 0000:08:00.1: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=0 bytes]
WARNING: CPU: 8 PID: 1021 at kernel/dma/debug.c:961 check_unmap+0x54f/0x8b0
RIP: 0010:check_unmap+0x54f/0x8b0
Call Trace:
debug_dma_unmap_page+0x57/0x60
mlx5_free_priv_descs+0x57/0x70 [mlx5_ib]
mlx5_ib_dereg_mr+0x1fb/0x3d0 [mlx5_ib]
ib_dereg_mr_user+0x60/0x140 [ib_core]
uverbs_destroy_uobject+0x59/0x210 [ib_uverbs]
uobj_destroy+0x3f/0x80 [ib_uverbs]
ib_uverbs_cmd_verbs+0x435/0xd10 [ib_uverbs]
? uverbs_finalize_object+0x50/0x50 [ib_uverbs]
? lock_acquire+0xc4/0x2e0
? lock_acquired+0x12/0x380
? lock_acquire+0xc4/0x2e0
? lock_acquire+0xc4/0x2e0
? ib_uverbs_ioctl+0x7c/0x140 [ib_uverbs]
? lock_release+0x28a/0x400
ib_uverbs_ioctl+0xc0/0x140 [ib_uverbs]
? ib_uverbs_ioctl+0x7c/0x140 [ib_uverbs]
__x64_sys_ioctl+0x7f/0xb0
do_syscall_64+0x38/0x90
Fix it by reorganizing the dereg flow and mlx5_ib_mr structure:
- Move the ib_umem field into the user MRs structure in the union as it's
applicable only there.
- Function mlx5_ib_dereg_mr() will now call mlx5_free_priv_descs() only
in case there isn't udata, which indicates that this isn't a user MR.
Fixes: f18ec4223117 ("RDMA/mlx5: Use a union inside mlx5_ib_mr")
Link: https://lore.kernel.org/r/66bb1dd253c1fd7ceaa9fc411061eefa457b86fb.1637581144.git.leonro@nvidia.com
Signed-off-by: Alaa Hleihel <alaa@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b0969f83890bf8b47f5c8bd42539599b2b52fdeb upstream.
When hns_roce_v2_destroy_qp() is called, the brief calling process of the
driver is as follows:
......
hns_roce_v2_destroy_qp
hns_roce_v2_qp_modify
hns_roce_cmd_mbox
hns_roce_qp_destroy
If hns_roce_cmd_mbox() detects that the hardware is being reset during the
execution of the hns_roce_cmd_mbox(), the driver will not be able to get
the return value from the hardware (the firmware cannot respond to the
driver's mailbox during the hardware reset phase).
The driver needs to wait for the hardware reset to complete before
continuing to execute hns_roce_qp_destroy(), otherwise it may happen that
the driver releases the resources but the hardware is still accessing. In
order to fix this problem, HNS RoCE needs to add a piece of code to wait
for the hardware reset to complete.
The original interface get_hw_reset_stat() is the instantaneous state of
the hardware reset, which cannot accurately reflect whether the hardware
reset is completed, so it needs to be replaced with the ae_dev_reset_cnt
interface.
The sign that the hardware reset is complete is that the return value of
the ae_dev_reset_cnt interface is greater than the original value
reset_cnt recorded by the driver.
Fixes: 6a04aed6afae ("RDMA/hns: Fix the chip hanging caused by sending mailbox&CMQ during reset")
Link: https://lore.kernel.org/r/20211123142402.26936-1-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 52414e27d6b568120b087d1fbafbb4482b0ccaab upstream.
is_reset is used to indicate whether the hardware starts to reset. When
hns_roce_hw_v2_reset_notify_down() is called, the hardware has not yet
started to reset. If is_reset is set at this time, all mailbox operations
of resource destroy actions will be intercepted by driver. When the driver
cleans up resources, but the hardware is still accessed, the following
errors will appear:
arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010
arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000003f
arm-smmu-v3 arm-smmu-v3.2.auto: 0x00000000a50e0800
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010
arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000043e
arm-smmu-v3 arm-smmu-v3.2.auto: 0x00000000a50a0800
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000020880000436
arm-smmu-v3 arm-smmu-v3.2.auto: 0x00000000a50a0880
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010
arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000043a
arm-smmu-v3 arm-smmu-v3.2.auto: 0x00000000a50e0840
hns3 0000:35:00.0: INT status: CMDQ(0x0) HW errors(0x0) other(0x0)
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
hns3 0000:35:00.0: received unknown or unhandled event of vector0
arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010
{34}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 7
is_reset will be set correctly in check_aedev_reset_status(), so the
setting in hns_roce_hw_v2_reset_notify_down() should be deleted.
Fixes: 726be12f5ca0 ("RDMA/hns: Set reset flag when hw resetting")
Link: https://lore.kernel.org/r/20211123084809.37318-1-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9292f8f9a2ac42eb320bced7153aa2e63d8cc13a upstream.
The code tests the dma address which legitimately can be 0.
The code should test the kernel logical address to avoid leaking eager
buffer allocations that happen to map to a dma address of 0.
Fixes: 60368186fd85 ("IB/hfi1: Fix user-space buffers mapping with IOMMU enabled")
Link: https://lore.kernel.org/r/20211129191952.101968.17137.stgit@awfm-01.cornelisnetworks.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 60a8b5a1611b4a26de4839ab9c1fc2a9cf3e17c1 upstream.
This buffer is currently allocated in hfi1_init():
if (reinit)
ret = init_after_reset(dd);
else
ret = loadtime_init(dd);
if (ret)
goto done;
/* allocate dummy tail memory for all receive contexts */
dd->rcvhdrtail_dummy_kvaddr = dma_alloc_coherent(&dd->pcidev->dev,
sizeof(u64),
&dd->rcvhdrtail_dummy_dma,
GFP_KERNEL);
if (!dd->rcvhdrtail_dummy_kvaddr) {
dd_dev_err(dd, "cannot allocate dummy tail memory\n");
ret = -ENOMEM;
goto done;
}
The reinit triggered path will overwrite the old allocation and leak it.
Fix by moving the allocation to hfi1_alloc_devdata() and the deallocation
to hfi1_free_devdata().
Link: https://lore.kernel.org/r/20211129192008.101968.91302.stgit@awfm-01.cornelisnetworks.com
Cc: stable@vger.kernel.org
Fixes: 46b010d3eeb8 ("staging/rdma/hfi1: Workaround to prevent corruption during packet delivery")
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f6a3cfec3c01f9983e961c3327cef0db129a3c43 upstream.
The following trace can be observed with an init failure such as firmware
load failures:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 0 P4D 0
Oops: 0010 [#1] SMP PTI
CPU: 0 PID: 537 Comm: kworker/0:3 Tainted: G OE --------- - - 4.18.0-240.el8.x86_64 #1
Workqueue: events work_for_cpu_fn
RIP: 0010:0x0
Code: Bad RIP value.
RSP: 0000:ffffae5f878a3c98 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff95e48e025c00 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff95e48e025c00
RBP: ffff95e4bf3660a4 R08: 0000000000000000 R09: ffffffff86d5e100
R10: ffff95e49e1de600 R11: 0000000000000001 R12: ffff95e4bf366180
R13: ffff95e48e025c00 R14: ffff95e4bf366028 R15: ffff95e4bf366000
FS: 0000000000000000(0000) GS:ffff95e4df200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 0000000f86a0a003 CR4: 00000000001606f0
Call Trace:
receive_context_interrupt+0x1f/0x40 [hfi1]
__free_irq+0x201/0x300
free_irq+0x2e/0x60
pci_free_irq+0x18/0x30
msix_free_irq.part.2+0x46/0x80 [hfi1]
msix_clean_up_interrupts+0x2b/0x70 [hfi1]
hfi1_init_dd+0x640/0x1a90 [hfi1]
do_init_one.isra.19+0x34d/0x680 [hfi1]
local_pci_probe+0x41/0x90
work_for_cpu_fn+0x16/0x20
process_one_work+0x1a7/0x360
worker_thread+0x1cf/0x390
? create_worker+0x1a0/0x1a0
kthread+0x112/0x130
? kthread_flush_work_fn+0x10/0x10
ret_from_fork+0x35/0x40
The free_irq() results in a callback to the registered interrupt handler,
and rcd->do_interrupt is NULL because the receive context data structures
are not fully initialized.
Fix by ensuring that the do_interrupt is always assigned and adding a
guards in the slow path handler to detect and handle a partially
initialized receive context and noop the receive.
Link: https://lore.kernel.org/r/20211129192003.101968.33612.stgit@awfm-01.cornelisnetworks.com
Cc: stable@vger.kernel.org
Fixes: b0ba3c18d6bf ("IB/hfi1: Move normal functions from hfi1_devdata to const array")
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b6d57e24ce6cc3df8a8845e1b193e88a65d501b1 upstream.
The following BUG has just surfaced with our 5.16 testing:
BUG: using smp_processor_id() in preemptible [00000000] code: mpicheck/1581081
caller is sdma_select_user_engine+0x72/0x210 [hfi1]
CPU: 0 PID: 1581081 Comm: mpicheck Tainted: G S 5.16.0-rc1+ #1
Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0016.033120161139 03/31/2016
Call Trace:
<TASK>
dump_stack_lvl+0x33/0x42
check_preemption_disabled+0xbf/0xe0
sdma_select_user_engine+0x72/0x210 [hfi1]
? _raw_spin_unlock_irqrestore+0x1f/0x31
? hfi1_mmu_rb_insert+0x6b/0x200 [hfi1]
hfi1_user_sdma_process_request+0xa02/0x1120 [hfi1]
? hfi1_write_iter+0xb8/0x200 [hfi1]
hfi1_write_iter+0xb8/0x200 [hfi1]
do_iter_readv_writev+0x163/0x1c0
do_iter_write+0x80/0x1c0
vfs_writev+0x88/0x1a0
? recalibrate_cpu_khz+0x10/0x10
? ktime_get+0x3e/0xa0
? __fget_files+0x66/0xa0
do_writev+0x65/0x100
do_syscall_64+0x3a/0x80
Fix this long standing bug by moving the smp_processor_id() to after the
rcu_read_lock().
The rcu_read_lock() implicitly disables preemption.
Link: https://lore.kernel.org/r/20211129191958.101968.87329.stgit@awfm-01.cornelisnetworks.com
Cc: stable@vger.kernel.org
Fixes: 0cb2aa690c7e ("IB/hfi1: Add sysfs interface for affinity setup")
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 378c67413de18b69fb3bb78d8c4f0f1192cfa973 ]
If the FW doesn't support MLX4_DEV_CAP_FLAG2_DIAG_PER_PORT, mlx4 driver
will fail the ib_setup_port_attrs, which is called from
ib_register_device()/enable_device_and_get(), in the end leads to device
not detected[1][2]
To fix it, add a new mlx4_ib_hw_stats_ops1, w/o alloc_hw_port_stats if FW
does not support MLX4_DEV_CAP_FLAG2_DIAG_PER_PORT.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=2014094
[2] https://lore.kernel.org/linux-rdma/CAMGffEn2wvEnmzc0xe=xYiCLqpphiHDBxCxqAELrBofbUAMQxw@mail.gmail.com
Fixes: 4b5f4d3fb408 ("RDMA: Split the alloc_hw_stats() ops to port and device variants")
Link: https://lore.kernel.org/r/20211115101519.27210-1-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6bda39149d4b8920fdb8744090653aca3daa792d ]
When VF is configured with default vlan, HW strips the vlan from the
packet and driver receives it in Rx completion. VLAN needs to be reported
for UD work completion only if the vlan is configured on the host. Add a
check for valid vlan in the UD receive path.
Link: https://lore.kernel.org/r/1631709163-2287-12-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0e60778efb072d47efc7100c4009b5bd97273b0b ]
The upper limit of MAX_LP_MSG_LEN on HIP08 is 64K, and the upper limit on
HIP09 is 16K. Regardless of whether it is HIP08 or HIP09, only 16K will be
used. In order to ensure compatibility, it is unified to 16K.
Setting MAX_LP_MSG_LEN to 16K will not cause performance loss on HIP08.
Fixes: fbed9d2be292 ("RDMA/hns: Fix configuration of ack_req_freq in QPC")
Link: https://lore.kernel.org/r/20211029100537.27299-1-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 571fb4fb78a3bf0fcadbe65eca9ca4ccee885af4 ]
We set the init CQ status to ARMED before. As a result, an unexpected CEQE
would be reported. Therefore, the init CQ status should be set to no_armed
rather than REG_NXT_CEQE.
Fixes: a5073d6054f7 ("RDMA/hns: Add eq support of hip08")
Link: https://lore.kernel.org/r/20211029095846.26732-1-liangwenpeng@huawei.com
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f4e56ec4452f48b8292dcf0e1c4bdac83506fb8b ]
The error flow fixed in this patch is not possible because all kernel
users of create QP interface check that device supports steering before
set IB_QP_CREATE_NETIF_QP flag.
Fixes: c1c98501121e ("IB/mlx4: Add support for steerable IB UD QPs")
Link: https://lore.kernel.org/r/91c61f6e60eb0240f8bbc321fda7a1d2986dd03c.1634023677.git.leonro@nvidia.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 598d16fa1bf93431ad35bbab3ed1affe4fb7b562 ]
Fill the missing parameters for the FW command while querying SRQ.
Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Link: https://lore.kernel.org/r/1631709163-2287-8-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4f960393a0ee9a39469ceb7c8077ae8db665cc12 upstream.
This patch fixes a crash caused by querying the QP via netlink, and
corrects the state of GSI qp. GSI qp's have a NULL qed_qp.
The call trace is generated by:
$ rdma res show
BUG: kernel NULL pointer dereference, address: 0000000000000034
Hardware name: Dell Inc. PowerEdge R720/0M1GCR, BIOS 1.2.6 05/10/2012
RIP: 0010:qed_rdma_query_qp+0x33/0x1a0 [qed]
RSP: 0018:ffffba560a08f580 EFLAGS: 00010206
RAX: 0000000200000000 RBX: ffffba560a08f5b8 RCX: 0000000000000000
RDX: ffffba560a08f5b8 RSI: 0000000000000000 RDI: ffff9807ee458090
RBP: ffffba560a08f5a0 R08: 0000000000000000 R09: ffff9807890e7048
R10: ffffba560a08f658 R11: 0000000000000000 R12: 0000000000000000
R13: ffff9807ee458090 R14: ffff9807f0afb000 R15: ffffba560a08f7ec
FS: 00007fbbf8bfe740(0000) GS:ffff980aafa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000034 CR3: 00000001720ba001 CR4: 00000000000606f0
Call Trace:
qedr_query_qp+0x82/0x360 [qedr]
ib_query_qp+0x34/0x40 [ib_core]
? ib_query_qp+0x34/0x40 [ib_core]
fill_res_qp_entry_query.isra.26+0x47/0x1d0 [ib_core]
? __nla_put+0x20/0x30
? nla_put+0x33/0x40
fill_res_qp_entry+0xe3/0x120 [ib_core]
res_get_common_dumpit+0x3f8/0x5d0 [ib_core]
? fill_res_cm_id_entry+0x1f0/0x1f0 [ib_core]
nldev_res_get_qp_dumpit+0x1a/0x20 [ib_core]
netlink_dump+0x156/0x2f0
__netlink_dump_start+0x1ab/0x260
rdma_nl_rcv+0x1de/0x330 [ib_core]
? nldev_res_get_cm_id_dumpit+0x20/0x20 [ib_core]
netlink_unicast+0x1b8/0x270
netlink_sendmsg+0x33e/0x470
sock_sendmsg+0x63/0x70
__sys_sendto+0x13f/0x180
? setup_sgl.isra.12+0x70/0xc0
__x64_sys_sendto+0x28/0x30
do_syscall_64+0x3a/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Cc: stable@vger.kernel.org
Fixes: cecbcddf6461 ("qedr: Add support for QP verbs")
Link: https://lore.kernel.org/r/20211027184329.18454-1-palok@marvell.com
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When irdma_ws_add fails, irdma_ws_remove is used to cleanup the leaf node.
This lead to holding the qos mutex twice in the QP resume path. Fix this
by avoiding the call to irdma_ws_remove and unwinding the error in
irdma_ws_add. This skips the call to irdma_tc_in_use function which is not
needed in the error unwind cases.
Fixes: 3ae331c75128 ("RDMA/irdma: Add QoS definitions")
Link: https://lore.kernel.org/r/20211019151654.1943-2-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Currently VLAN is reported in UD work completion when VLAN id is zero,
i.e. no VLAN case.
Report VLAN in UD work completion only when VLAN id is non-zero.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20211019151654.1943-1-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Normally the zero fill would hide the missing initialization, but an
errant set to desc_size in reg_create() causes a crash:
BUG: unable to handle page fault for address: 0000000800000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 5 PID: 890 Comm: ib_write_bw Not tainted 5.15.0-rc4+ #47
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5_ib_dereg_mr+0x14/0x3b0 [mlx5_ib]
Code: 48 63 cd 4c 89 f7 48 89 0c 24 e8 37 30 03 e1 48 8b 0c 24 eb a0 90 0f 1f 44 00 00 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 30 <48> 8b 2f 65 48 8b 04 25 28 00 00 00 48 89 44 24 28 31 c0 8b 87 c8
RSP: 0018:ffff88811afa3a60 EFLAGS: 00010286
RAX: 000000000000001c RBX: 0000000800000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000800000000
RBP: 0000000800000000 R08: 0000000000000000 R09: c0000000fffff7ff
R10: ffff88811afa38f8 R11: ffff88811afa38f0 R12: ffffffffa02c7ac0
R13: 0000000000000000 R14: ffff88811afa3cd8 R15: ffff88810772fa00
FS: 00007f47b9080740(0000) GS:ffff88852cd40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000800000000 CR3: 000000010761e003 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
mlx5_ib_free_odp_mr+0x95/0xc0 [mlx5_ib]
mlx5_ib_dereg_mr+0x128/0x3b0 [mlx5_ib]
ib_dereg_mr_user+0x45/0xb0 [ib_core]
? xas_load+0x8/0x80
destroy_hw_idr_uobject+0x1a/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x2f/0x150 [ib_uverbs]
uobj_destroy+0x3c/0x70 [ib_uverbs]
ib_uverbs_cmd_verbs+0x467/0xb00 [ib_uverbs]
? uverbs_finalize_object+0x60/0x60 [ib_uverbs]
? ttwu_queue_wakelist+0xa9/0xe0
? pty_write+0x85/0x90
? file_tty_write.isra.33+0x214/0x330
? process_echoes+0x60/0x60
ib_uverbs_ioctl+0xa7/0x110 [ib_uverbs]
__x64_sys_ioctl+0x10d/0x8e0
? vfs_write+0x17f/0x260
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Add the missing xarray initialization and remove the desc_size set.
Fixes: a639e66703ee ("RDMA/mlx5: Zero out ODP related items in the mlx5_ib_mr")
Link: https://lore.kernel.org/r/a4846a11c9de834663e521770da895007f9f0d30.1634642730.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Device's QP memory should only be allocated and released by IB layer.
This patch removes the redundant release of the device's qp memory and
uses completion APIs to make sure that .destroy_qp() only return, when qp
reference becomes 0.
Fixes: 514aee660df4 ("RDMA: Globally allocate and release QP memory")
Link: https://lore.kernel.org/r/20211019082212.7052-1-pkushwaha@marvell.com
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
sc_disable() after having disabled the send context wakes up any waiters
by calling hfi1_qp_wakeup() while holding the waitlock for the sc.
This is contrary to the model for all other calls to hfi1_qp_wakeup()
where the waitlock is dropped and a local is used to drive calls to
hfi1_qp_wakeup().
Fix by moving the sc->piowait into a local list and driving the wakeup
calls from the list.
Fixes: 099a884ba4c0 ("IB/hfi1: Handle wakeup of orphaned QPs for pio")
Link: https://lore.kernel.org/r/20211013141852.128104.2682.stgit@awfm-01.cornelisnetworks.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Overflowing either addrlimit or bytes_togo can allow userspace to trigger
a buffer overflow of kernel memory. Check for overflows in all the places
doing math on user controlled buffers.
Fixes: f931551bafe1 ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Link: https://lore.kernel.org/r/20211012175519.7298.77738.stgit@awfm-01.cornelisnetworks.com
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Currently, the driver doesn't set the PCP-based priority for DCT, hence
DCT response packets are transmitted without user priority.
Fix it by setting user provided priority in the eth_prio field in the DCT
context, which in turn sets the value in the transmitted packet.
Fixes: 776a3906b692 ("IB/mlx5: Add support for DC target QP")
Link: https://lore.kernel.org/r/5fd2d94a13f5742d8803c218927322257d53205c.1633512672.git.leonro@nvidia.com
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The valid bit for extended CQE's written by HW is retrieved from the
incorrect quad-word. This leads to missed completions for any UD traffic
particularly after a wrap-around.
Get the valid bit for extended CQE's from the correct quad-word in the
descriptor.
Fixes: 551c46edc769 ("RDMA/irdma: Add user/kernel shared libraries")
Link: https://lore.kernel.org/r/20211005182302.374-1-shiraz.saleem@intel.com
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
If the CQE size of the user space is not the size supported by the
hardware, the creation of CQ should be stopped.
Fixes: 09a5f210f67e ("RDMA/hns: Add support for CQE in size of 64 Bytes")
Link: https://lore.kernel.org/r/20210927125557.15031-3-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The size of CQE is different for different versions of hardware, so the
driver needs to specify the size of CQE explicitly.
Fixes: 09a5f210f67e ("RDMA/hns: Add support for CQE in size of 64 Bytes")
Link: https://lore.kernel.org/r/20210927125557.15031-2-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Pointers should be printed with %p or %px rather than cast to 'unsigned
long long' and printed with %llx. Change %llx to %p to print the secured
pointer.
Fixes: 042a00f93aad ("IB/{ipoib,hfi1}: Add a timeout handler for rdma_netdev")
Link: https://lore.kernel.org/r/20210922134857.619602-1-qtxuning1999@sjtu.edu.cn
Signed-off-by: Guo Zhi <qtxuning1999@sjtu.edu.cn>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Usnic VF doesn't need lock in atomic context to create QPs, so it is safe
to use mutex instead of spinlock. Such change fixes the following smatch
error.
Smatch static checker warning:
lib/kobject.c:289 kobject_set_name_vargs()
warn: sleeping in atomic context
Fixes: 514aee660df4 ("RDMA: Globally allocate and release QP memory")
Link: https://lore.kernel.org/r/2a0e295786c127e518ebee8bb7cafcb819a625f6.1631520231.git.leonro@nvidia.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
gcc 8.3 and 5.4 throw this:
In function 'modify_qp_init_to_rtr',
././include/linux/compiler_types.h:322:38: error: call to '__compiletime_assert_1859' declared with attribute error: FIELD_PREP: value too large for the field
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
[..]
drivers/infiniband/hw/hns/hns_roce_common.h:91:52: note: in expansion of macro 'FIELD_PREP'
*((__le32 *)ptr + (field_h) / 32) |= cpu_to_le32(FIELD_PREP( \
^~~~~~~~~~
drivers/infiniband/hw/hns/hns_roce_common.h:95:39: note: in expansion of macro '_hr_reg_write'
#define hr_reg_write(ptr, field, val) _hr_reg_write(ptr, field, val)
^~~~~~~~~~~~~
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:4412:2: note: in expansion of macro 'hr_reg_write'
hr_reg_write(context, QPC_LP_PKTN_INI, lp_pktn_ini);
Because gcc has miscalculated the constantness of lp_pktn_ini:
mtu = ib_mtu_enum_to_int(ib_mtu);
if (WARN_ON(mtu < 0)) [..]
lp_pktn_ini = ilog2(MAX_LP_MSG_LEN / mtu);
Since mtu is limited to {256,512,1024,2048,4096} lp_pktn_ini is between 4
and 8 which is compatible with the 4 bit field in the FIELD_PREP.
Work around this broken compiler by adding a 'can never be true'
constraint on lp_pktn_ini's value which clears out the problem.
Fixes: f0cb411aad23 ("RDMA/hns: Use new interface to modify QP context")
Link: https://lore.kernel.org/r/0-v1-c773ecb137bc+11f-hns_gcc8_jgg@nvidia.com
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Report the correct WC error when MW bind error related asynchronous events
are generated by HW.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20210916191222.824-5-shiraz.saleem@intel.com
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When the retry counter exceeds, as the remote QP didn't send any Ack or
Nack an asynchronous event (AE) for too many retries is generated. Add
code to handle the AE and set the correct IB WC error code
IB_WC_RETRY_EXC_ERR.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20210916191222.824-4-shiraz.saleem@intel.com
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add lower bound check for CQ entries at creation time.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20210916191222.824-3-shiraz.saleem@intel.com
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Due to duplicate reset flags, CQP commands are processed during reset.
This leads CQP failures such as below:
irdma0: [Delete Local MAC Entry Cmd Error][op_code=49] status=-27 waiting=1 completion_err=0 maj=0x0 min=0x0
Remove the redundant flag and set the correct reset flag so CPQ is paused
during reset
Fixes: 8498a30e1b94 ("RDMA/irdma: Register auxiliary driver and implement private channel OPs")
Link: https://lore.kernel.org/r/20210916191222.824-2-shiraz.saleem@intel.com
Reported-by: LiLiang <liali@redhat.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
clang becomes confused due to the comparison to NULL in a integer constant
expression context:
>> drivers/infiniband/hw/qib/qib_sysfs.c:413:1: error: static_assert expression is not an integral constant expression
QIB_DIAGC_ATTR(rc_resends);
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/qib/qib_sysfs.c:406:16: note: expanded from macro 'QIB_DIAGC_ATTR'
static_assert(&((struct qib_ibport *)0)->rvp.n_##N != (u64 *)NULL); \
Nathan found __same_type that solves this problem nicely, so use it instead.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Pull rdma fixes from Jason Gunthorpe:
"I don't usually send a second PR in the merge window, but the fix to
mlx5 is significant enough that it should start going through the
process ASAP. Along with it comes some of the usual -rc stuff that
would normally wait for a -rc2 or so.
Summary:
Important error case regression fixes in mlx5:
- Wrong size used when computing the error path smaller allocation
request leads to corruption
- Confusing but ultimately harmless alignment mis-calculation
Static checker warning fixes:
- NULL pointer subtraction in qib
- kcalloc in bnxt_re
- Missing static on global variable in hfi1"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/hfi1: make hist static
RDMA/bnxt_re: Prefer kcalloc over open coded arithmetic
IB/qib: Fix null pointer subtraction compiler warning
RDMA/mlx5: Fix xlt_chunk_align calculation
RDMA/mlx5: Fix number of allocated XLT entries
|
|
This symbol is not used outside of trace.c, so marks it static.
Fix the following sparse warning:
drivers/infiniband/hw/hfi1/trace.c:491:23: warning: symbol 'hist' was not declared. Should it be static?
Link: https://lore.kernel.org/r/1630921723-21545-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
As noted in the "Deprecated Interfaces, Language Features, Attributes, and
Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead to
values wrapping around and a smaller allocation being made than the caller
was expecting. Using those allocations could lead to linear overflows of
heap memory and other misbehaviors.
In this case this is not actually dynamic sizes: both sides of the
multiplication are constant values. However it is best to refactor this
anyway, just to keep the open-coded math idiom out of code.
So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.
Also, remove the unnecessary initialization of the sqp_tbl variable since
it is set a few lines later.
[1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Link: https://lore.kernel.org/r/20210905081812.17113-1-len.baker@gmx.com
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
>> drivers/infiniband/hw/qib/qib_sysfs.c:411:1: warning: performing pointer subtraction with a null pointer has undefined behavior
+[-Wnull-pointer-subtraction]
QIB_DIAGC_ATTR(rc_resends);
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/qib/qib_sysfs.c:408:51: note: expanded from macro 'QIB_DIAGC_ATTR'
.counter = &((struct qib_ibport *)0)->rvp.n_##N - (u64 *)0, \
Use offsetof and accomplish the type check using static_assert.
Fixes: 4a7aaf88c89f ("RDMA/qib: Use attributes for the port sysfs")
Link: https://lore.kernel.org/r/0-v1-43ae3c759177+65-qib_type_jgg@nvidia.com
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The XLT chunk alignment depends on ent_size not sizeof(ent_size) aka
sizeof(size_t). The incoming ent_size is either 8 or 16, so the
miscalculation when 16 is required is only an over-alignment and
functional harmless.
Fixes: 8010d74b9965 ("RDMA/mlx5: Split the WR setup out of mlx5_ib_update_xlt()")
Link: https://lore.kernel.org/r/20210908081849.7948-2-schnelle@linux.ibm.com
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In commit 8010d74b9965b ("RDMA/mlx5: Split the WR setup out of
mlx5_ib_update_xlt()") the allocation logic was split out of
mlx5_ib_update_xlt() and the logic was changed to enable better OOM
handling. Sadly this change introduced a miscalculation of the number of
entries that were actually allocated when under memory pressure where it
can actually become 0 which on s390 lets dma_map_single() fail.
It can also lead to corruption of the free pages list when the wrong
number of entries is used in the calculation of sg->length which is used
as argument for free_pages().
Fix this by using the allocation size instead of misusing get_order(size).
Cc: stable@vger.kernel.org
Fixes: 8010d74b9965 ("RDMA/mlx5: Split the WR setup out of mlx5_ib_update_xlt()")
Link: https://lore.kernel.org/r/20210908081849.7948-1-schnelle@linux.ibm.com
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Pull rdma updates from Jason Gunthorpe:
"This is quite a small cycle, no major series stands out. The HNS and
rxe drivers saw the most activity this cycle, with rxe being broken
for a good chunk of time. The significant deleted line count is due to
a SPDX cleanup series.
Summary:
- Various cleanup and small features for rtrs
- kmap_local_page() conversions
- Driver updates and fixes for: efa, rxe, mlx5, hfi1, qed, hns
- Cache the IB subnet prefix
- Rework how CRC is calcuated in rxe
- Clean reference counting in iwpm's netlink
- Pull object allocation and lifecycle for user QPs to the uverbs
core code
- Several small hns features and continued general code cleanups
- Fix the scatterlist confusion of orig_nents/nents introduced in an
earlier patch creating the append operation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (90 commits)
RDMA/mlx5: Relax DCS QP creation checks
RDMA/hns: Delete unnecessary blank lines.
RDMA/hns: Encapsulate the qp db as a function
RDMA/hns: Adjust the order in which irq are requested and enabled
RDMA/hns: Remove RST2RST error prints for hw v1
RDMA/hns: Remove dqpn filling when modify qp from Init to Init
RDMA/hns: Fix QP's resp incomplete assignment
RDMA/hns: Fix query destination qpn
RDMA/hfi1: Convert to SPDX identifier
IB/rdmavt: Convert to SPDX identifier
RDMA/hns: Bugfix for incorrect association between dip_idx and dgid
RDMA/hns: Bugfix for the missing assignment for dip_idx
RDMA/hns: Bugfix for data type of dip_idx
RDMA/hns: Fix incorrect lsn field
RDMA/irdma: Remove the repeated declaration
RDMA/core/sa_query: Retry SA queries
RDMA: Use the sg_table directly and remove the opencoded version from umem
lib/scatterlist: Fix wrong update of orig_nents
lib/scatterlist: Provide a dedicated function to support table append
RDMA/hns: Delete unused hns bitmap interface
...
|
|
From Maor Gottlieb
====================
Fix the use of nents and orig_nents in the sg table append helpers. The
nents should be used by the DMA layer to store the number of DMA mapped
sges, the orig_nents is the number of CPU sges.
Since the sg append logic doesn't always create a SGL with exactly
orig_nents entries store a total_nents as well to allow the table to be
properly free'd and reorganize the freeing logic to share across all the
use cases.
====================
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* 'sg_nents':
RDMA: Use the sg_table directly and remove the opencoded version from umem
lib/scatterlist: Fix wrong update of orig_nents
lib/scatterlist: Provide a dedicated function to support table append
|
|
In order to create DCS QPs, we don't need to rely on both
log_max_dci_stream_channels and log_max_dci_errored_streams capabilities.
Fixes: 11656f593a86 ("RDMA/mlx5: Add DCS offload support")
Link: https://lore.kernel.org/r/3e7b3363fd73686176cc584295e86832a7cf99b2.1630320354.git.leonro@nvidia.com
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Just delete unnecessary blank lines.
Link: https://lore.kernel.org/r/1629985056-57004-8-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Encapsulate qp db into two functions: user and kernel.
Link: https://lore.kernel.org/r/1629985056-57004-7-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
It should first alloc workqueue and request irq, and finally enable irq.
Link: https://lore.kernel.org/r/1629985056-57004-6-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There is no need to prints error for hw_v1.
Link: https://lore.kernel.org/r/1629985056-57004-5-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|