| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In the current implementation, the driver tries to allocate contiguous
memory, and if it fails, it falls back to 4K fragmented allocation.
Once the memory is fragmented, the first allocation might take a lot
of time, and even fail, which can cause connection failures.
This patch changes the logic to always allocate with 4K granularity,
since it's more robust and more likely to succeed.
This patch was tested with Lustre and no performance degradation
was observed.
Note: This commit eliminates the "shrinking WQE" feature. This feature
depended on using vmap to create a virtually contiguous send WQ.
vmap use was abandoned due to problems with several processors (see the
commit cited below). As a result, shrinking WQE was available only with
physically contiguous send WQs. Allocating such send WQs caused the
problems described above.
Therefore, as a side effect of eliminating the use of large physically
contiguous send WQs, the shrinking WQE feature became unavailable.
Warning example:
worker/20:1: page allocation failure: order:8, mode:0x80d0
CPU: 20 PID: 513 Comm: kworker/20:1 Tainted: G OE ------------
Workqueue: ib_cm cm_work_handler [ib_cm]
Call Trace:
[<ffffffff81686d81>] dump_stack+0x19/0x1b
[<ffffffff81186160>] warn_alloc_failed+0x110/0x180
[<ffffffff8118a954>] __alloc_pages_nodemask+0x9b4/0xba0
[<ffffffff811ce868>] alloc_pages_current+0x98/0x110
[<ffffffff81184fae>] __get_free_pages+0xe/0x50
[<ffffffff8133f6fe>] swiotlb_alloc_coherent+0x5e/0x150
[<ffffffff81062551>] x86_swiotlb_alloc_coherent+0x41/0x50
[<ffffffffa056b4c4>] mlx4_buf_direct_alloc.isra.7+0xc4/0x180 [mlx4_core]
[<ffffffffa056b73b>] mlx4_buf_alloc+0x1bb/0x260 [mlx4_core]
[<ffffffffa0b15496>] create_qp_common+0x536/0x1000 [mlx4_ib]
[<ffffffff811c6ef7>] ? dma_pool_free+0xa7/0xd0
[<ffffffffa0b163c1>] mlx4_ib_create_qp+0x3b1/0xdc0 [mlx4_ib]
[<ffffffffa0b01bc2>] ? mlx4_ib_create_cq+0x2d2/0x430 [mlx4_ib]
[<ffffffffa0b21f20>] mlx4_ib_create_qp_wrp+0x10/0x20 [mlx4_ib]
[<ffffffffa08f152a>] ib_create_qp+0x7a/0x2f0 [ib_core]
[<ffffffffa06205d4>] rdma_create_qp+0x34/0xb0 [rdma_cm]
[<ffffffffa08275c9>] kiblnd_create_conn+0xbf9/0x1950 [ko2iblnd]
[<ffffffffa074077a>] ? cfs_percpt_unlock+0x1a/0xb0 [libcfs]
[<ffffffffa0835519>] kiblnd_passive_connect+0xa99/0x18c0 [ko2iblnd]
Fixes: 73898db04301 ("net/mlx4: Avoid wrong virtual mappings")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This clearly indicates that the input is a bitwise combination of values
in an enum, and identifies which enum contains the definition of the bits.
Special accessors are provided that handle the mandatory validation of the
allowed bits and enforce the correct type for bitwise flags.
If we had introduced this at the start then the kabi would have uniformly
used u64 data to pass flags, however today there is a mixture of u64 and
u32 flags. All places are converted to accept both sizes and the accessor
fixes it. This allows all existing flags to grow to u64 in future without
any hassle.
Finally all flags are, by definition, optional. If flags are not passed
the accessor does not fail, but provides a value of zero.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
|
|
Since neither ib_post_send() nor ib_post_recv() modify the data structure
their second argument points at, declare that argument const. This change
makes it necessary to declare the 'bad_wr' argument const too and also to
modify all ULPs that call ib_post_send(), ib_post_recv() or
ib_post_srq_recv(). This patch does not change any functionality but makes
it possible for the compiler to verify whether the
ib_post_(send|recv|srq_recv) really do not modify the posted work request.
To make this possible, only one cast had to be introduce that casts away
constness, namely in rpcrdma_post_recvs(). The only way I can think of to
avoid that cast is to introduce an additional loop in that function or to
change the data type of bad_wr from struct ib_recv_wr ** into int
(an index that refers to an element in the work request list). However,
both approaches would require even more extensive changes than this
patch.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Since the next patch will constify the wr pointer, do not modify the data
that pointer points at.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
When posting a send work request, the work request that is posted is not
modified by any of the RDMA drivers. Make this explicit by constifying
most ib_send_wr pointers in RDMA transport drivers.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The driver implements the modify_cq callback, but did not set the bit to
expose it to userspace.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Because the data structure of hip08 is little endian, it needs to fix the
immediate field of wqe and cqe into __le32.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
In order to avoid using usleep function in lock function, we use delay
function instead of it. Besides, it also use brackets for standardized
the computed order.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
When hop_num is more than three, it need to return -EINVAL. This patch
fixes it.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
When create loop qp fail, it will return the correct result when
modify_qp() fails.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch adds PCI matching for the hns 50GE NIC.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
When init cmq fail in initial flow of RoCE, it should return the errno of
cmq_init function, not of the rest call.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
When a CX5 device is configured in dual-port RoCE mode, after creating
many VFs against port 1, creating the same number of VFs against port 2
will flood kernel/syslog with something like
"mlx5_*:mlx5_ib_bind_slave_port:4266:(pid 5269): port 2 already
affiliated."
So basically, when traversing mlx5_ib_dev_list, mlx5_ib_add_slave_port()
repeatedly attempts to bind the new mpi structure to every device on the
list until it finds an unbound device.
Change the log level from warn to dbg to avoid log flooding as the warning
should be harmless.
Signed-off-by: Qing Huang <qing.huang@oracle.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch avoids that the following compiler warning is reported when
building with gcc 8 and W=1:
drivers/infiniband/hw/usnic/usnic_fwd.c:95:2: warning: 'strncpy' output may be truncated copying 16 bytes from a string of length 20 [-Wstringop-truncation]
strncpy(ufdev->name, netdev_name(ufdev->netdev),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(ufdev->name) - 1);
~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This driver doesn't provide any kernel services, it only provides
an interface via uverbs, so it should depend on, not select, uverbs
support.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch implements the srq specific verbs such as create/destroy/modify
and post_srq_recv. And adds srq specific structures and defines to t4.h
and uapi.
Also updates the cq poll logic to deal with completions that are
associated with the SRQ's.
This patch also handles kernel mode SRQ_LIMIT events as well as flushed
SRQ buffers
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch adds kernel mode t4_srq structures and support functions,
uapi structures and defines, as well as firmware work request structures.
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch avoids that the following compiler warning is reported when
building with gcc 8 and W=1:
In function 'ocrdma_mbx_get_ctrl_attribs',
inlined from 'ocrdma_init_hw' at drivers/infiniband/hw/ocrdma/ocrdma_hw.c:3224:11:
drivers/infiniband/hw/ocrdma/ocrdma_hw.c:1368:3: warning: 'strncpy' output may be truncated copying 31 bytes from a string of length 31 [-Wstringop-truncation]
strncpy(dev->model_number,
^~~~~~~~~~~~~~~~~~~~~~~~~~
hba_attribs->controller_model_number, 31);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
We have a parallel unlocked reader and writer with ib_uverbs_get_context()
vs everything else, and nothing guarantees this works properly.
Audit and fix all of the places that access ucontext to use one of the
following locking schemes:
- Call ib_uverbs_get_ucontext() under SRCU and check for failure
- Access the ucontext through an struct ib_uobject context member
while holding a READ or WRITE lock on the uobject.
This value cannot be NULL and has no race.
- Hold the ucontext_lock and check for ufile->ucontext !NULL
This also re-implements ib_uverbs_get_ucontext() in a way that is safe
against concurrent ib_uverbs_get_context() and disassociation.
As a side effect, every access to ucontext in the commands is via
ib_uverbs_get_context() with an error check, or via the uobject, so there
is no longer any need for the core code to check ucontext on every command
call. These checks are also removed.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This approach matches the standard flow of the typical write method that
relies on the HW object to store the device and the uobject to access the
ucontext. Avoids the use of the devx_ufile2uctx in several places will
make revising the semantics of ib_uverbs_get_ucontext() in the next patch
simpler.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Expose the mlx5 flow steering parsing trees, exposing the functionality to
user space.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add support to set a destination that is a flow table, this can come from
the DEVX destination.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add support to set a public flow steering rule when its destination is a
TIR by using raw specification data.
The logic follows the verbs API but instead of using ib_spec(s) the raw,
device specific, description is used.
This allows supporting specialty matchers without having to define new
matches in the verbs struct based language.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Introduce driver create and destroy flow methods on the uverbs flow
object.
This allows the driver to get its specific device attributes to match the
underlay specification while still using the generic ib_flow object for
cleanup and code sharing.
The IB object's attributes are set via the ib_set_flow() helper function.
The specific implementation for the given specification is added in
downstream patches.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Introduce flow steering matcher object and its create and destroy methods.
This matcher object holds some mlx5 specific driver properties that
matches the underlay device specification when an mlx5 flow steering group
is created.
It will be used in downstream patches to be part of mlx5 specific create
flow method.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git
This is required to resolve dependencies of the next series of RDMA
patches.
* branch 'mellanox/mlx5-next':
net/mlx5: Add support for flow table destination number
net/mlx5: Add forward compatible support for the FTE match data
net/mlx5: Fix tristate and description for MLX5 module
net/mlx5: Better return types for CQE API
net/mlx5: Use ERR_CAST() instead of coding it
net/mlx5: Add missing SET_DRIVER_VERSION command translation
net/mlx5: Add XRQ commands definitions
net/mlx5: Add core support for double vlan push/pop steering action
net/mlx5: Expose MPEGC (Management PCIe General Configuration) structures
net/mlx5: FW tracer, add hardware structures
net/mlx5: fix uaccess beyond "count" in debugfs read/write handlers
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
mlx5 core infrastructure updates and fixes.
From Eran:
- Add MPEGC (Management PCIe General Configuration) registers and btis
- Fix tristate and description for MLX5 module
rom Feras:
- Add hardware structures for the firmware tracer
From Jainbo:
- Core support for double vlan push/pop steering action
From Max:
- Add XRQ commands definitions
From Noa:
- Add missing SET_DRIVER_VERSION command translation
From Roi:
- Use ERR_CAST() instead of coding it
From Tariq:
- Better return types for CQE API
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
This patch avoids that gcc reports the following warning when building
with W=1:
drivers/infiniband/hw/bnxt_re/ib_verbs.c:2404:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Remove "uctx" and "pa" variables that were set but not used.
Fixes: a8b92ca1b0e5 ("IB/mlx5: Introduce DEVX")
Fixes: 8f0622873358 ("RDMA/mlx5: Remove debug prints of VMA pointers")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Convert all users of struct acpi_reference_args to more generic
fwnode_reference_args. This will
1) avoid an ACPI specific references to device nodes with integer
arguments as well as
2) allow making references to nodes other than device nodes in ACPI.
As a by-product, convert the fwnode interger arguments to u64. The
arguments were 64-bit integers on ACPI but the fwnode arguments were
just 32-bit.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
All conflicts were trivial overlapping changes, so reasonably
easy to resolve.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that the old implementation of pci_reset_bus() is gone, replace
pci_try_reset_bus() with pci_reset_bus().
Compared to the old implementation, new code will fail immmediately with
-EAGAIN if object lock cannot be obtained.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Drivers are expected to call pci_try_reset_slot() or pci_try_reset_bus() by
querying if a system supports hotplug or not. A survey showed that most
drivers don't do this and we are leaking hotplug capability to the user.
Hide pci_try_slot_reset() from drivers and embed into pci_try_bus_reset().
Change pci_try_reset_bus() parameter from struct pci_bus to struct pci_dev.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Getting ready to hide pci_reset_bridge_secondary_bus() from the drivers.
pci_reset_bridge_secondary_bus() should only be used internally by the
PCI code itself.
Other drivers should rely on higher level pci_try_reset_bus() API.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Current description did not include new devices. Fix that by proving the
correct generic description.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Pull rdma fixes from Jason Gunthorpe:
"Things have been quite slow, only 6 RC patches have been sent to the
list. Regression, user visible bugs, and crashing fixes:
- cxgb4 could wrongly fail MR creation due to a typo
- various crashes if the wrong QP type is mixed in with APIs that
expect other types
- syzkaller oops
- using ERR_PTR and NULL together cases HFI1 to crash in some cases
- mlx5 memory leak in error unwind"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Fix memory leak in mlx5_ib_create_srq() error path
RDMA/uverbs: Don't fail in creation of multiple flows
IB/hfi1: Fix incorrect mixing of ERR_PTR and NULL return values
RDMA/uverbs: Fix slab-out-of-bounds in ib_uverbs_ex_create_flow
RDMA/uverbs: Protect from attempts to create flows on unsupported QP
iw_cxgb4: correctly enforce the max reg_mr depth
|
|
User's supplied index is checked again total number of system pages, but
this number already includes num_static_sys_pages, so addition of that
value to supplied index causes to below error while trying to access
sys_pages[].
BUG: KASAN: slab-out-of-bounds in bfregn_to_uar_index+0x34f/0x400
Read of size 4 at addr ffff880065561904 by task syz-executor446/314
CPU: 0 PID: 314 Comm: syz-executor446 Not tainted 4.18.0-rc1+ #256
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0xef/0x17e
print_address_description+0x83/0x3b0
kasan_report+0x18d/0x4d0
bfregn_to_uar_index+0x34f/0x400
create_user_qp+0x272/0x227d
create_qp_common+0x32eb/0x43e0
mlx5_ib_create_qp+0x379/0x1ca0
create_qp.isra.5+0xc94/0x22d0
ib_uverbs_create_qp+0x21b/0x2a0
ib_uverbs_write+0xc2c/0x1010
vfs_write+0x1b0/0x550
ksys_write+0xc6/0x1a0
do_syscall_64+0xa7/0x590
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x433679
Code: fd ff 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b 91 fd ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff2b3d8e48 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00000000004002f8 RCX: 0000000000433679
RDX: 0000000000000040 RSI: 0000000020000240 RDI: 0000000000000003
RBP: 00000000006d4018 R08: 00000000004002f8 R09: 00000000004002f8
R10: 00000000004002f8 R11: 0000000000000217 R12: 0000000000000000
R13: 000000000040cb00 R14: 000000000040cb90 R15: 0000000000000006
Allocated by task 314:
kasan_kmalloc+0xa0/0xd0
__kmalloc+0x1a9/0x510
mlx5_ib_alloc_ucontext+0x966/0x2620
ib_uverbs_get_context+0x23f/0xa60
ib_uverbs_write+0xc2c/0x1010
__vfs_write+0x10d/0x720
vfs_write+0x1b0/0x550
ksys_write+0xc6/0x1a0
do_syscall_64+0xa7/0x590
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 1:
__kasan_slab_free+0x12e/0x180
kfree+0x159/0x630
kvfree+0x37/0x50
single_release+0x8e/0xf0
__fput+0x2d8/0x900
task_work_run+0x102/0x1f0
exit_to_usermode_loop+0x159/0x1c0
do_syscall_64+0x408/0x590
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff880065561100
which belongs to the cache kmalloc-4096 of size 4096
The buggy address is located 2052 bytes inside of
4096-byte region [ffff880065561100, ffff880065562100)
The buggy address belongs to the page:
page:ffffea0001955800 count:1 mapcount:0 mapping:ffff88006c402480 index:0x0 compound_mapcount: 0
flags: 0x4000000000008100(slab|head)
raw: 4000000000008100 ffffea0001a7c000 0000000200000002 ffff88006c402480
raw: 0000000000000000 0000000080070007 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff880065561800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff880065561880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff880065561900: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff880065561980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff880065561a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Cc: <stable@vger.kernel.org> # 4.15
Fixes: 1ee47ab3e8d8 ("IB/mlx5: Enable QP creation with a given blue flame index")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
There is no need for three consecutive calls to alloc_bfreg(). It can be
implemented with one function.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch adds support for iw_cxb4 to extend cqes from existing 32Byte
size to 64Byte.
Also includes adds backward compatibility support (for 32Byte) to work
with older libraries.
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Avoid that the following compiler warning is reported when building
with gcc 8:
drivers/infiniband/hw/hfi1/verbs.c:1896:2: warning: 'strncpy' output may be truncated copying 64 bytes from a string of length 64 [-Wstringop-truncation]
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Fix memory leak in the error path of mlx5_ib_create_srq() by making sure
to free the allocated srq.
Fixes: c2b37f76485f ("IB/mlx5: Fix integer overflows in mlx5_ib_create_srq")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch updates the implementation of set_mac by using
command queue instead of directly writing registers.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch updates the implementation of set_gid by using
command queue instead of directly writing registers.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
In hip08, the TPQ(Timer Poll Queue) should be extended
to host memory. This patch adds the support of TPQ.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
In hip08, TSQ(Transport Service Queue) should be extended
to host memory to store the doorbells. This patch adds the
support of creating TSQ, and then configured to the hardware.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch removes the warnings reported by sparse.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch does not change any functionality but avoids that sparse
reports the following:
drivers/infiniband/hw/ocrdma/ocrdma_verbs.c:1818:31: warning: context imbalance in 'ocrdma_destroy_qp' - different lock contexts for basic block
Compile-tested only.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Selvin Xavier <selvin.xavier@broadcom.com>
Cc: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The nes infiniband driver uses current_kernel_time() to get a nanosecond
granunarity timestamp to initialize its tcp sequence counters. This is
one of only a few remaining users of that deprecated function, so we
should try to get rid of it.
Aside from using a deprecated API, there are several problems I see here:
- Using a CLOCK_REALTIME based time source makes it predictable in
case the time base is synchronized.
- Using a coarse timestamp means it only gets updated once per jiffie,
making it even more predictable in order to avoid having to access
the hardware clock source
- The upper 2 bits are always zero because the nanoseconds are at most
999999999.
For the Linux TCP implementation, we use secure_tcp_seq(), which appears
to be appropriate here as well, and solves all the above problems.
i40iw uses a variant of the same code, so I do that same thing there
for ipv4. Unlike nes, i40e also supports ipv6, which needs to call
secure_tcpv6_seq instead.
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Avoid that the compiler reports the following when building with W=1:
drivers/infiniband/hw/nes/nes_utils.c: In function 'nes_arp_table':
drivers/infiniband/hw/nes/nes_utils.c:689:9: warning: variable 'tmp_addr' set but not used [-Wunused-but-set-variable]
__be32 tmp_addr;
^~~~~~~~
drivers/infiniband/hw/nes/nes_hw.c: In function 'flush_wqes':
drivers/infiniband/hw/nes/nes_hw.c:3840:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
int ret;
^~~
drivers/infiniband/hw/nes/nes_verbs.c: In function 'nes_setup_virt_qp':
drivers/infiniband/hw/nes/nes_verbs.c:811:6: warning: variable 'pbl_entries' set but not used [-Wunused-but-set-variable]
u32 pbl_entries;
^~~~~~~~~~~
drivers/infiniband/hw/nes/nes_verbs.c: In function 'nes_dereg_mr':
drivers/infiniband/hw/nes/nes_verbs.c:2487:6: warning: variable 'minor_code' set but not used [-Wunused-but-set-variable]
u16 minor_code;
^~~~~~~~~~
drivers/infiniband/hw/nes/nes_cm.c: In function 'mini_cm_recv_pkt':
drivers/infiniband/hw/nes/nes_cm.c:2570:20: warning: variable 'tmp_saddr' set but not used [-Wunused-but-set-variable]
__be32 tmp_daddr, tmp_saddr;
^~~~~~~~~
drivers/infiniband/hw/nes/nes_cm.c:2570:9: warning: variable 'tmp_daddr' set but not used [-Wunused-but-set-variable]
__be32 tmp_daddr, tmp_saddr;
^~~~~~~~~
drivers/infiniband/hw/nes/nes_cm.c: In function 'cm_event_connected':
drivers/infiniband/hw/nes/nes_cm.c:3578:22: warning: variable 'raddr' set but not used [-Wunused-but-set-variable]
struct sockaddr_in *raddr;
^~~~~
drivers/infiniband/hw/nes/nes_cm.c: In function 'cm_event_reset':
drivers/infiniband/hw/nes/nes_cm.c:3753:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
int ret;
^~~
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
