summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/nes
AgeCommit message (Collapse)AuthorFilesLines
2019-06-13rdma: Remove nesJason Gunthorpe15-19673/+0
This driver was first merged over 10 years ago and has not seen major activity by the authors in the last 7 years. However, in that time it has been patched 150 times to adapt it to changing kernel APIs. Further, the hardware has several issues, like not supporting 64 bit DMA, that make it rather uninteresting for use with modern systems and RDMA. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-11RDMA: Convert CQ allocations to be under core responsibilityLeon Romanovsky1-39/+21
Ensure that CQ is allocated and freed by IB/core and not by drivers. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Tested-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-11RDMA: Clean destroy CQ in drivers do not return errorsLeon Romanovsky2-24/+10
Like all other destroy commands, .destroy_cq() call is not supposed to fail. In all flows, the attempt to return earlier caused to memory leaks. This patch converts .destroy_cq() to do not return any errors. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Gal Pressman <galpress@amazon.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-11RDMA/nes: Avoid memory allocation during CQ destroyLeon Romanovsky1-17/+11
The memory allocation call can fail and cause to early return from nes_desotroy_cq() function. This situation will cause to memory leak of struct nes_cq. Rewrite function to avoid memory allocation. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-10RDMA: Move owner into struct ib_device_opsJason Gunthorpe1-1/+1
This more closely follows how other subsytems work, with owner being a member of the structure containing the function pointers. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-10RDMA: Move uverbs_abi_ver into struct ib_device_opsJason Gunthorpe1-0/+2
No reason for every driver to emit code to set this, just make it part of the driver's existing static const ops structure. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-10RDMA: Move driver_id into struct ib_device_opsJason Gunthorpe1-1/+2
No reason for every driver to emit code to set this, just make it part of the driver's existing static const ops structure. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21RDMA/nes: Remove second wait queue initialization callLeon Romanovsky1-1/+0
The same wait queue is initialized a couple of lines above. Fixes: 3c2d774cad5b ("RDMA/nes: Add a driver for NetEffect RNICs") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21RDMA/nes: Remove useless NULL checksLeon Romanovsky1-6/+0
The destroy functions are always called with relevant structs, there is no need to check their existence. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21RDMA/umem: Move page_shift from ib_umem to ib_odp_umemJason Gunthorpe1-4/+5
This value has always been set to PAGE_SHIFT in the core code, the only thing that does differently was the ODP path. Move the value into the ODP struct and still use it for ODP, but change all the non-ODP things to just use PAGE_SHIFT/PAGE_SIZE/PAGE_MASK directly. Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-05-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds2-87/+84
Pull rdma updates from Jason Gunthorpe: "This has been a smaller cycle than normal. One new driver was accepted, which is unusual, and at least one more driver remains in review on the list. Summary: - Driver fixes for hns, hfi1, nes, rxe, i40iw, mlx5, cxgb4, vmw_pvrdma - Many patches from MatthewW converting radix tree and IDR users to use xarray - Introduction of tracepoints to the MAD layer - Build large SGLs at the start for DMA mapping and get the driver to split them - Generally clean SGL handling code throughout the subsystem - Support for restricting RDMA devices to net namespaces for containers - Progress to remove object allocation boilerplate code from drivers - Change in how the mlx5 driver shows representor ports linked to VFs - mlx5 uapi feature to access the on chip SW ICM memory - Add a new driver for 'EFA'. This is HW that supports user space packet processing through QPs in Amazon's cloud" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (186 commits) RDMA/ipoib: Allow user space differentiate between valid dev_port IB/core, ipoib: Do not overreact to SM LID change event RDMA/device: Don't fire uevent before device is fully initialized lib/scatterlist: Remove leftover from sg_page_iter comment RDMA/efa: Add driver to Kconfig/Makefile RDMA/efa: Add the efa module RDMA/efa: Add EFA verbs implementation RDMA/efa: Add common command handlers RDMA/efa: Implement functions that submit and complete admin commands RDMA/efa: Add the ABI definitions RDMA/efa: Add the com service API definitions RDMA/efa: Add the efa_com.h file RDMA/efa: Add the efa.h header file RDMA/efa: Add EFA device definitions RDMA: Add EFA related definitions RDMA/umem: Remove hugetlb flag RDMA/bnxt_re: Use core helpers to get aligned DMA address RDMA/i40iw: Use core helpers to get aligned DMA address within a supported page size RDMA/verbs: Add a DMA iterator to return aligned contiguous memory blocks RDMA/umem: Add API to find best driver supported page size in an MR ...
2019-05-03RDMA: Get rid of iw_cm_verbsKamal Heib1-17/+10
Integrate iw_cm_verbs data members into ib_device_ops and ib_device structs, this is done to achieve the following: 1) Avoid memory related bugs durring error unwind 2) Make the code more cleaner 3) Reduce code duplication Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-09ipv4: Prepare rtable for IPv6 gatewayDavid Ahern1-1/+1
To allow the gateway to be either an IPv4 or IPv6 address, remove rt_uses_gateway from rtable and replace with rt_gw_family. If rt_gw_family is set it implies rt_uses_gateway. Rename rt_gateway to rt_gw4 to represent the IPv4 version. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01IB: Pass only ib_udata in function prototypesShamir Rabinovitch1-17/+18
Now when ib_udata is passed to all the driver's object create/destroy APIs the ib_udata will carry the ib_ucontext for every user command. There is no need to also pass the ib_ucontext via the functions prototypes. Make ib_udata the only argument psssed. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-01IB: Remove 'uobject->context' dependency in object destroy APIsShamir Rabinovitch1-4/+12
Now that we have the udata passed to all the ib_xxx object destroy APIs and the additional macro 'rdma_udata_to_drv_context' to get the ib_ucontext from ib_udata stored in uverbs_attr_bundle, we can finally start to remove the dependency of the drivers in the ib_xxx->uobject->context. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-01IB: Pass uverbs_attr_bundle down ib_x destroy pathShamir Rabinovitch2-10/+10
The uverbs_attr_bundle with the ucontext is sent down to the drivers ib_x destroy path as ib_udata. The next patch will use the ib_udata to free the drivers destroy path from the dependency in 'uobject->context' as we already did for the create path. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-26RDMA/nes: remove redundant check on udataColin Ian King1-39/+34
The non-null check on udata is redundant as this check was performed just a few statements earlier and the check is always true as udata must be non-null at this point. Remove redundant the check on udata and the redundant else part that can never be executed. Detected by CoverityScan, CID#1477317 ("Logically dead code") Fixes: 899444505473 ("IB/{hw,sw}: Remove 'uobject->context' dependency in object creation APIs") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-23RDMA: Handle ucontext allocations by IB/coreLeon Romanovsky1-21/+11
Following the PD conversion patch, do the same for ucontext allocations. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-16RDMA/nes: Remove useless usecnt variable and redundant memsetLeon Romanovsky2-9/+1
The internal design of RDMA/core ensures that there dealloc ucontext will be called only if alloc_ucontext succeeded, hence there is no need to manage internal variable to mark validity of ucontext. As part of this change, remove redundant memeset too. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-16IB/{hw,sw}: Remove 'uobject->context' dependency in object creation APIsShamir Rabinovitch1-6/+6
Now when we have the udata passed to all the ib_xxx object creation APIs and the additional macro 'rdma_udata_to_drv_context' to get the ib_ucontext from ib_udata stored in uverbs_attr_bundle, we can finally start to remove the dependency of the drivers in the ib_xxx->uobject->context. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-13RDMA/nes: Use for_each_sg_dma_page iterator for umem SGLShiraz, Saleem1-131/+89
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped SGL and get the page DMA address. This avoids the extra loop to iterate pages in the SGE when for_each_sg iterator is used. Additionally, purge umem->page_shift usage in the driver as its only relevant for ODP MRs. Use system page size and shift instead. Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-09RDMA: Handle PD allocations by IB/coreLeon Romanovsky1-21/+11
The PD allocations in IB/core allows us to simplify drivers and their error flows in their .alloc_pd() paths. The changes in .alloc_pd() go hand in had with relevant update in .dealloc_pd(). We will use this opportunity and convert .dealloc_pd() to don't fail, as it was suggested a long time ago, failures are not happening as we have never seen a WARN_ON print. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-31RDMA: Provide safe ib_alloc_device() functionLeon Romanovsky1-1/+1
All callers to ib_alloc_device() provide a larger size than struct ib_device and rely on the fact that struct ib_device is embedded in their driver specific structure as the first member. Provide a safer variant of ib_alloc_device() that checks and enforces this approach to make sure the drivers are using it right. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-14RDMA: Introduce and use rdma_device_to_ibdev()Parav Pandit1-1/+1
Introduce and use rdma_device_to_ibdev() API for those drivers which are registering one sysfs group and also use in ib_core. In subsequent patch, device->provider_ibdev one-to-one mapping is no longer holds true during accessing sysfs entries. Therefore, introduce an API rdma_device_to_ibdev() that provides such information. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-14RDMA: Rename port_callback to init_portParav Pandit1-1/+1
Most provider routines are callback routines which ib core invokes. _callback suffix doesn't convey information about when such callback is invoked. Therefore, rename port_callback to init_port. Additionally, store the init_port function pointer in ib_device_ops, so that it can be accessed in subsequent patches when binding rdma device to net namespace. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-11IB/{core,hw}: Have ib_umem_get extract the ib_ucontext from ib_udataJason Gunthorpe1-1/+1
ib_umem_get() can only be called in a method callback, which always has a udata parameter. This allows ib_umem_get() to derive the ucontext pointer directly from the udata without requiring the drivers to find it in some way or another. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
2019-01-11IB/{core,uverbs}: Move ib_umem_xxx functions from ib_core to ib_uverbsShamir Rabinovitch1-1/+1
The next patch will add dependency from ib_umem_get in to ib_uverbs so move the required ib_umem_xxx functionality to it's correct module - ib_uverbs - and avoid circular dependecy from the form of ib_core -> ib_uverbs -> ib_core in depmod. Since this now requires all drivers to be build modular if uverbs is modular, hoist the test a couple drivers had into the main kconfig and apply it to all drivers uniformly. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-29Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds2-35/+38
Pull rdma updates from Jason Gunthorpe: "This has been a fairly typical cycle, with the usual sorts of driver updates. Several series continue to come through which improve and modernize various parts of the core code, and we finally are starting to get the uAPI command interface cleaned up. - Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4, mlx5, qib, rxe, usnic - Rework the entire syscall flow for uverbs to be able to run over ioctl(). Finally getting past the historic bad choice to use write() for command execution - More functional coverage with the mlx5 'devx' user API - Start of the HFI1 series for 'TID RDMA' - SRQ support in the hns driver - Support for new IBTA defined 2x lane widths - A big series to consolidate all the driver function pointers into a big struct and have drivers provide a 'static const' version of the struct instead of open coding initialization - New 'advise_mr' uAPI to control device caching/loading of page tables - Support for inline data in SRPT - Modernize how umad uses the driver core and creates cdev's and sysfs files - First steps toward removing 'uobject' from the view of the drivers" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (193 commits) RDMA/srpt: Use kmem_cache_free() instead of kfree() RDMA/mlx5: Signedness bug in UVERBS_HANDLER() IB/uverbs: Signedness bug in UVERBS_HANDLER() IB/mlx5: Allocate the per-port Q counter shared when DEVX is supported IB/umad: Start using dev_groups of class IB/umad: Use class_groups and let core create class file IB/umad: Refactor code to use cdev_device_add() IB/umad: Avoid destroying device while it is accessed IB/umad: Simplify and avoid dynamic allocation of class IB/mlx5: Fix wrong error unwind IB/mlx4: Remove set but not used variable 'pd' RDMA/iwcm: Don't copy past the end of dev_name() string IB/mlx5: Fix long EEH recover time with NVMe offloads IB/mlx5: Simplify netdev unbinding IB/core: Move query port to ioctl RDMA/nldev: Expose port_cap_flags2 IB/core: uverbs copy to struct or zero helper IB/rxe: Reuse code which sets port state IB/rxe: Make counters thread safe IB/mlx5: Use the correct commands for UMEM and UCTX allocation ...
2018-12-19RDMA: Cleanup undesired pd->uobject usageShamir Rabinovitch1-2/+2
Drivers should be using udata to determine if a method is invoked from user space or kernel space. A pd does not necessarily say a different objects is kernel or user. Transforming the tests to use udata eliminates a large number of uobject references from the drivers. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-12RDMA: Start use ib_device_opsKamal Heib1-1/+1
Make all the required change to start use the ib_device_ops structure. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-12RDMA/nes: Initialize ib_device_ops structKamal Heib1-32/+35
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-25net: remove unsafe skb_insert()Eric Dumazet1-2/+2
I do not see how one can effectively use skb_insert() without holding some kind of lock. Otherwise other cpus could have changed the list right before we have a chance of acquiring list->lock. Only existing user is in drivers/infiniband/hw/nes/nes_mgt.c and this one probably meant to use __skb_insert() since it appears nesqp->pau_list is protected by nesqp->pau_lock. This looks like nesqp->pau_lock could be removed, since nesqp->pau_list.lock could be used instead. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Faisal Latif <faisal.latif@intel.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: linux-rdma <linux-rdma@vger.kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-10infiniband: nes: Fix more direct skb list accesses.David S. Miller1-2/+2
The following: skb = skb->next; ... if (skb == (struct sk_buff *)queue) is transformed into: skb = skb_peek_next(skb, queue); ... if (!skb) Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds5-56/+23
Pull rdma updates from Jason Gunthorpe: "This has been a smaller cycle with many of the commits being smallish code fixes and improvements across the drivers. - Driver updates for bnxt_re, cxgb4, hfi1, hns, mlx5, nes, qedr, and rxe - Memory window support in hns - mlx5 user API 'flow mutate/steering' allows accessing the full packet mangling and matching machinery from user space - Support inter-working with verbs API calls in the 'devx' mlx5 user API, and provide options to use devx with less privilege - Modernize the use of syfs and the device interface to use attribute groups and cdev properly for uverbs, and clean up some of the core code's device list management - More progress on net namespaces for RDMA devices - Consolidate driver BAR mmapping support into core code helpers and rework how RDMA holds poitners to mm_struct for get_user_pages cases - First pass to use 'dev_name' instead of ib_device->name - Device renaming for RDMA devices" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (242 commits) IB/mlx5: Add support for extended atomic operations RDMA/core: Fix comment for hw stats init for port == 0 RDMA/core: Refactor ib_register_device() function RDMA/core: Fix unwinding flow in case of error to register device ib_srp: Remove WARN_ON in srp_terminate_io() IB/mlx5: Allow scatter to CQE without global signaled WRs IB/mlx5: Verify that driver supports user flags IB/mlx5: Support scatter to CQE for DC transport type RDMA/drivers: Use core provided API for registering device attributes RDMA/core: Allow existing drivers to set one sysfs group per device IB/rxe: Remove unnecessary enum values RDMA/umad: Use kernel API to allocate umad indexes RDMA/uverbs: Use kernel API to allocate uverbs indexes RDMA/core: Increase total number of RDMA ports across all devices IB/mlx4: Add port and TID to MAD debug print IB/mlx4: Enable debug print of SMPs RDMA/core: Rename ports_parent to ports_kobj RDMA/core: Do not expose unsupported counters IB/mlx4: Refer to the device kobject instead of ports_parent RDMA/nldev: Allow IB device rename through RDMA netlink ...
2018-10-17RDMA/drivers: Use core provided API for registering device attributesParav Pandit1-38/+20
Use rdma_set_device_sysfs_group() to register device attributes and simplify the driver. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-26RDMA/drivers: Use dev_name instead of ibdev->nameJason Gunthorpe1-1/+1
These return the same thing but dev_name is a more conventional use of the kernel API. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
2018-09-26RDMA: Fully setup the device name in ib_register_deviceJason Gunthorpe1-2/+1
The current code has two copies of the device name, ibdev->dev and dev_name(&ibdev->dev), and they are setup at different times, which is very confusing. Set them both up at the same time and make dev_name() the lead name, which is the proper use of the driver core APIs. To make it very clear that the name is not valid until registration pass it in to the ib_register_device() call rather than messing with ibdev->name directly. Also the reorganization now checks that dev_name is unique even if it does not contain a %. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Adit Ranadive <aditr@vmware.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Acked-by: Devesh Sharma <devesh.sharma@broadcom.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
2018-09-21IB/nes: Remove unnecessary parenthesesNathan Chancellor1-1/+1
Clang warns when more than one set of parentheses are used in single conditional statements. drivers/infiniband/hw/nes/nes_hw.c:1446:27: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] } while ((temp_phy_data2 == temp_phy_data)); ~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~ drivers/infiniband/hw/nes/nes_hw.c:1446:27: note: remove extraneous parentheses around the comparison to silence this warning } while ((temp_phy_data2 == temp_phy_data)); ~ ^ ~ drivers/infiniband/hw/nes/nes_hw.c:1446:27: note: use '=' to turn this equality comparison into an assignment } while ((temp_phy_data2 == temp_phy_data)); ^~ = Remove the unnecessary parentheses to silence this warning. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-10infiniband: nes: Use skb_peek_next() and skb_queue_walk().David S. Miller1-5/+3
Instead of direct SKB list accesses. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06RDMA/nes: Delete impossible debug printsLeon Romanovsky3-14/+0
The pci-core and net-core logic ensure that parameters provided to nes_probe() and nes_netdev_open() are valid, hence the assert print are not possible. Cc: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-31RDMA/providers: Remove pointless functionsKamal Heib1-60/+0
The rdma core is taking care of return the right error code when the rdma device callbacks aren't supported. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-31RDMA, core and ULPs: Declare ib_post_send() and ib_post_recv() arguments constBart Van Assche1-4/+4
Since neither ib_post_send() nor ib_post_recv() modify the data structure their second argument points at, declare that argument const. This change makes it necessary to declare the 'bad_wr' argument const too and also to modify all ULPs that call ib_post_send(), ib_post_recv() or ib_post_srq_recv(). This patch does not change any functionality but makes it possible for the compiler to verify whether the ib_post_(send|recv|srq_recv) really do not modify the posted work request. To make this possible, only one cast had to be introduce that casts away constness, namely in rpcrdma_post_recvs(). The only way I can think of to avoid that cast is to introduce an additional loop in that function or to change the data type of bad_wr from struct ib_recv_wr ** into int (an index that refers to an element in the work request list). However, both approaches would require even more extensive changes than this patch. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-31RDMA: Constify the argument of the work request conversion functionsBart Van Assche1-1/+2
When posting a send work request, the work request that is posted is not modified by any of the RDMA drivers. Make this explicit by constifying most ib_send_wr pointers in RDMA transport drivers. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-11infiniband: i40iw, nes: don't use wall time for TCP sequence numbersArnd Bergmann1-3/+5
The nes infiniband driver uses current_kernel_time() to get a nanosecond granunarity timestamp to initialize its tcp sequence counters. This is one of only a few remaining users of that deprecated function, so we should try to get rid of it. Aside from using a deprecated API, there are several problems I see here: - Using a CLOCK_REALTIME based time source makes it predictable in case the time base is synchronized. - Using a coarse timestamp means it only gets updated once per jiffie, making it even more predictable in order to avoid having to access the hardware clock source - The upper 2 bits are always zero because the nanoseconds are at most 999999999. For the Linux TCP implementation, we use secure_tcp_seq(), which appears to be appropriate here as well, and solves all the above problems. i40iw uses a variant of the same code, so I do that same thing there for ipv4. Unlike nes, i40e also supports ipv6, which needs to call secure_tcpv6_seq instead. Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-11RDMA/nes: Avoid complaints about unused variablesBart Van Assche2-5/+3
Avoid that the compiler reports the following when building with W=1: drivers/infiniband/hw/nes/nes_utils.c: In function 'nes_arp_table': drivers/infiniband/hw/nes/nes_utils.c:689:9: warning: variable 'tmp_addr' set but not used [-Wunused-but-set-variable] __be32 tmp_addr; ^~~~~~~~ drivers/infiniband/hw/nes/nes_hw.c: In function 'flush_wqes': drivers/infiniband/hw/nes/nes_hw.c:3840:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret; ^~~ drivers/infiniband/hw/nes/nes_verbs.c: In function 'nes_setup_virt_qp': drivers/infiniband/hw/nes/nes_verbs.c:811:6: warning: variable 'pbl_entries' set but not used [-Wunused-but-set-variable] u32 pbl_entries; ^~~~~~~~~~~ drivers/infiniband/hw/nes/nes_verbs.c: In function 'nes_dereg_mr': drivers/infiniband/hw/nes/nes_verbs.c:2487:6: warning: variable 'minor_code' set but not used [-Wunused-but-set-variable] u16 minor_code; ^~~~~~~~~~ drivers/infiniband/hw/nes/nes_cm.c: In function 'mini_cm_recv_pkt': drivers/infiniband/hw/nes/nes_cm.c:2570:20: warning: variable 'tmp_saddr' set but not used [-Wunused-but-set-variable] __be32 tmp_daddr, tmp_saddr; ^~~~~~~~~ drivers/infiniband/hw/nes/nes_cm.c:2570:9: warning: variable 'tmp_daddr' set but not used [-Wunused-but-set-variable] __be32 tmp_daddr, tmp_saddr; ^~~~~~~~~ drivers/infiniband/hw/nes/nes_cm.c: In function 'cm_event_connected': drivers/infiniband/hw/nes/nes_cm.c:3578:22: warning: variable 'raddr' set but not used [-Wunused-but-set-variable] struct sockaddr_in *raddr; ^~~~~ drivers/infiniband/hw/nes/nes_cm.c: In function 'cm_event_reset': drivers/infiniband/hw/nes/nes_cm.c:3753:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret; ^~~ Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Faisal Latif <faisal.latif@intel.com> Cc: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-09IB/nes: Fix a compiler warningBart Van Assche1-1/+1
Avoid that the following compiler warning is reported when building with W=1: drivers/infiniband/hw/nes/nes_hw.c:646:51: warning: suggest braces around empty body in an 'if' statement [-Wempty-body] Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18IB/core: add max_send_sge and max_recv_sge attributesSteve Wise1-1/+2
This patch replaces the ib_device_attr.max_sge with max_send_sge and max_recv_sge. It allows ulps to take advantage of devices that have very different send and recv sge depths. For example cxgb4 has a max_recv_sge of 4, yet a max_send_sge of 16. Splitting out these attributes allows much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW API. Consider a large RDMA WRITE that has 16 scattergather entries. With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of 16, it can be done with 1 WRITE WR. Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook2-3/+5
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+1
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-27IB/nes: fix nes_netdev_start_xmit()'s return typeLuc Van Oostenryck1-1/+1
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-10 16:29:48 +0300