summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/hfi1
AgeCommit message (Collapse)AuthorFilesLines
2017-10-30IB/hfi1: Race condition between user notification and driver stateMichael J. Ruhl2-10/+31
The handler for link init state (HLS_UP_INIT) notifies userspace (update_statusp()) before enabling the device (RCV_CTRL_RCV_PORT_ENABLE_SMASK) or setting the device state (ppd->host_link_state). This causes a race condition where the userspace thinks the interface is in the INIT state before the driver has set that state. Rework the code path to eliminate the race. Delay setting the init state until after a HW settling period. Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland8-18/+18
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-18Merge branch 'timer_setup' into for-nextDoug Ledford8-32/+26
Conflicts: drivers/infiniband/hw/cxgb4/cm.c drivers/infiniband/hw/qib/qib_driver.c drivers/infiniband/hw/qib/qib_mad.c There were minor fixups needed in these files. Just minor context diffs due to patches from independent sources touching the same basic area. Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-18Merge branch 'for-next-early' into for-nextDoug Ledford26-514/+681
The early for-next branch was based on v4.14-rc2, while the shared pull request I got from Mellanox used a v4.14-rc4 base. I'm making the branch that was the shared Mellanox pull request the new for-next branch and merging the early for-next branch into it. Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-18IB/hfi1: Convert timers to use timer_setup()Kees Cook8-32/+26
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Switches test of .data field to .function, since .data will be going away. Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: linux-rdma@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-18IB/hfi1: Add MODULE_FIRMWARE statementsThomas Bogendoerfer1-0/+5
Provide information about used firmware files via modinfo. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-18Merge branch 'hfi1' into k.o/for-nextDoug Ledford9-49/+48
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-18IB/hfi1: Set hdr_type when tx req is allocatedKaike Wan3-2/+2
Setting the protocol type should be part of initializing the tx request. For UC and RC, the current protocol type is part of the qp priv structure. For ud requests, it needs to be adjusted dynamically, based on the AV posted with the WQE. This patch will simplify the initialization of the tx request. Fixes: 5b6cabb0db77 ("IB/hfi1: Add 16B RC/UC support") Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-18IB/hfi1: Eliminate allocation while atomicDon Hiatt2-14/+9
The PIO trailing buffer was being dynamically allocated but the kcalloc return value was not being checked. Further, the GFP_KERNEL was being used even though the send engine might be called with interrupts disabled. Since the maximum size of the trailing buffer is only 12 bytes (CRC = 4, LT = 1, Pad = 0 to 7 bytes) just statically allocate the buffer, remove the alloc entirely and share it with the SDMA engine by making it global. Reported-by: Leon Romanovsky <leon@kernel.org> Fixes: 566d53a82644 ("IB/hfi1: Enhance PIO/SDMA send for 16B") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-18IB/hfi1: Mask out A bit from psn traceDon Hiatt1-2/+2
The trace logic prior to the fixes below used to mask the A bit from the psn. It now mistakenly displays the A bit, which is already displayed separately. Fix by adding the appropriate mask to the psn tracing. Fixes: 228d2af1b723 ("IB/hfi1: Separate input/output header tracing") Fixes: 863cf89d472f ("IB/hfi1: Add 16B trace support") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-18IB/hfi1: Correct unnecessary acquisition of HW mutexGrzegorz Morys1-2/+17
Avoid acquiring already acquired hardware mutex and releasing the unacquired one as these are redundant operations. Add printouts for such situations to help detect potential errors within the driver. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Grzegorz Morys <grzegorz.morys@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-18IB/hfi1: Allow meta version 4 for platform configurationJakub Byczkowski1-1/+1
Parsing of platform configuration format 4 will fail on meta version check. Allow meta version 4 during parsing. Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-18IB/hfi1: Fix serdes loopback set-upJan Sokolowski2-28/+17
Change serdes mode setting to use MISC_CONFIG_BITS in VERIFY_CAP_LOCAL_LINK_WIDTH register. This method of setting up serdes loopback is universally compatible across all firmware versions. Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-15IB/hfi1: Define hfi1_handle_cnp_tbl[] onceBart Van Assche2-5/+6
Move the hfi1_handle_cnp_tbl[] from a header file to a .c file such that only one copy ends up in the hfi1 kernel module. This patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-15IB/hfi1: Remove set-but-not-used variablesBart Van Assche6-28/+1
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-15IB/hfi1: Suppress gcc 7 fall-through complaintsBart Van Assche3-2/+4
Avoid that gcc 7 reports the following warning when building with W=1: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-04IB/hfi1: Do not warn on lid conversions for OPADon Hiatt1-2/+5
On OPA devices opa_local_smp_check will receive 32Bit LIDs when the LID is Extended. In such cases, it is okay to lose the upper 16 bits of the LID as this information is obtained elsewhere. Do not issue a warning when calling ib_lid_cpu16() in this case by masking out the upper 16Bits. [75920.148985] ------------[ cut here ]------------ [75920.154651] WARNING: CPU: 0 PID: 1718 at ./include/rdma/ib_verbs.h:3788 hfi1_process_mad+0x1c1f/0x1c80 [hfi1] [75920.166192] Modules linked in: ib_ipoib hfi1(E) rdmavt(E) rdma_ucm(E) ib_ucm(E) rdma_cm(E) ib_cm(E) iw_cm(E) ib_umad(E) ib_uverbs(E) ib_core(E) libiscsi scsi_transport_iscsi dm_mirror dm_region_hash dm_log dm_mod dax x86_pkg_temp_thermal intel_powerclamp coretemp kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel mei_me ipmi_si iTCO_wdt iTCO_vendor_support crypto_simd ipmi_devintf pcspkr mei sg i2c_i801 glue_helper lpc_ich shpchp ioatdma mfd_core wmi ipmi_msghandler cryptd acpi_power_meter acpi_pad nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm igb ptp ahci libahci pps_core crc32c_intel libata dca i2c_algo_bit i2c_core [last unloaded: ib_core] [75920.246331] CPU: 0 PID: 1718 Comm: kworker/0:1H Tainted: G W I E 4.13.0-rc7+ #1 [75920.255907] Hardware name: Intel Corporation S2600WT2/S2600WT2, BIOS SE5C610.86B.01.01.0008.021120151325 02/11/2015 [75920.268158] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core] [75920.274934] task: ffff88084a718000 task.stack: ffffc9000a424000 [75920.282123] RIP: 0010:hfi1_process_mad+0x1c1f/0x1c80 [hfi1] [75920.288881] RSP: 0018:ffffc9000a427c38 EFLAGS: 00010206 [75920.295265] RAX: 0000000000010001 RBX: ffff8808361420e8 RCX: ffff880837811d80 [75920.303784] RDX: 0000000000000002 RSI: 0000000000007fff RDI: ffff880837811d80 [75920.312302] RBP: ffffc9000a427d38 R08: 0000000000000000 R09: ffff8808361420e8 [75920.320819] R10: ffff88083841f0e8 R11: ffffc9000a427da8 R12: 0000000000000001 [75920.329335] R13: ffff880837810000 R14: 0000000000000000 R15: ffff88084f1a4800 [75920.337849] FS: 0000000000000000(0000) GS:ffff88085f400000(0000) knlGS:0000000000000000 [75920.347450] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [75920.354405] CR2: 00007f9e4b3d9000 CR3: 0000000001c09000 CR4: 00000000001406f0 [75920.362947] Call Trace: [75920.366257] ? ib_mad_recv_done+0x258/0x9b0 [ib_core] [75920.372457] ? ib_mad_recv_done+0x258/0x9b0 [ib_core] [75920.378652] ? __kmalloc+0x1df/0x210 [75920.383229] ib_mad_recv_done+0x305/0x9b0 [ib_core] [75920.389270] __ib_process_cq+0x5d/0xb0 [ib_core] [75920.395032] ib_cq_poll_work+0x20/0x60 [ib_core] [75920.400777] process_one_work+0x149/0x360 [75920.405836] worker_thread+0x4d/0x3c0 [75920.410505] kthread+0x109/0x140 [75920.414681] ? rescuer_thread+0x380/0x380 [75920.419731] ? kthread_park+0x60/0x60 [75920.424406] ret_from_fork+0x25/0x30 [75920.428972] Code: 4c 89 9d 58 ff ff ff 49 89 45 00 66 b8 00 02 49 89 45 08 e8 44 27 89 e0 4c 8b 9d 58 ff ff ff e9 d8 f6 ff ff 0f ff e9 55 e7 ff ff <0f> ff e9 3b e5 ff ff 0f ff 0f 1f 84 00 00 00 00 00 e9 4b e9 ff [75921.451269] ---[ end trace cf26df27c9597265 ]--- Fixes: 62ede7779904 ("Add OPA extended LID support") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-04IB/rdmavt: Correct issues with read-mostly and send size cache linesSebastian Sanchez1-2/+2
The s_ahgpsn was incorrectly placed in the read-mostly section of the QP and the s_curr_size and s_hdrwords are oversized. The misplaced s_ahgpsn will cause the read-mostly cachelines to thrash. Place s_ahgpsn in the send side cache lines and correctly size and s_hdrwords and s_cur_size to keep the send side cachelines at the same size. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-04IB/hfi1: Prevent LNI out of sync by resetting host interface versionSebastian Sanchez3-40/+101
When the link is disabled and re-enabled, the host version bit is not set again, so the firmware behaves as though it’s interacting with an old driver. This causes LNI to get out of sync. The host version bit needs to be set at load_8051_firmware() and _dc_start(). Currently, it's only set at load_8051_firmware(). Create a common function to set the bit with the intent to make the code more maintainable in the future, set the host version bit at _dc_start() and modify the 8051 command API to prevent a deadlock as _dc_start() is already holding the dc8051 lock. Fixes: 913cc67159bc ("IB/hfi1: Always perform offline transition") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-04IB/hfi1: Fix incorrect available receive user context countMichael J. Ruhl4-17/+29
The addition of the VNIC contexts to num_rcv_contexts changes the meaning of the sysfs value nctxts from available user contexts, to user contexts + reserved VNIC contexts. User applications that use nctxts are now broken. Update the calculation so that VNIC contexts are used only if there are hardware contexts available, and do not silently affect nctxts. Update code to use the calculated VNIC context number. Update the sysfs value nctxts to be available user contexts only. Fixes: 2280740f01ae ("IB/hfi1: Virtual Network Interface Controller (VNIC) HW support") Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Niranjana Vishwanathapura <Niranjana.Vishwanathapura@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: <Stable@vger.kernel.org> #v4.12+ Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-04IB/hfi1: Fix output trace issues from 16B changeMike Marciniszyn2-2/+4
The 16B changes to the output side of the header trace introduced two issues: 1. An uninitialized field "l4" for 9B packets This field needs to be given a value of 0 for 9B packets to insure a correct 9B trace. The fix adds a new define to insure that there is a dummy default for 9B packets to insure the correct string is decoded. 2. Use of entry vs. __entry in field references Fixes: Commit 863cf89d472f ("IB/hfi1: Add 16B trace support") Reported-by: Kaike Wan <kaike.wan@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-04IB/hfi1: Add parsing for platform configuration format version 4Jakub Byczkowski1-2/+22
Platform configuration format version 4, that didn't use the file size field, is not parsed by the host driver. Only version 5 is supported. Add logic in parsing procedure to determine what format is being used and allow to read data from version 4 files. Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@intel.com> Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-29IB/hfi1: Refactor reset_ctxt() IOCTLMichael J. Ruhl1-56/+66
The IOCTL is a bit unwieldy. Refactor reset_ctxt() to be a bit more manageable. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-29IB/hfi1: Refactor get_user() IOCTLsMichael J. Ruhl1-40/+34
The IOCTL is a bit unwieldy. Refactor to a common pattern. Refactor _RECV_CTRL, _POLL_TYPE, _ACK_EVENT and _SET_PKEY IOCTLs to a common pattern. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-29IB/hfi1: Refactor hfi_user_exp_rcv_invalid() IOCTLsMichael J. Ruhl2-17/+40
The IOCTL is a bit unwieldy. Refactor to a common pattern. Refactor _TID_INVAL_READ IOCTLs. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-29IB/hfi1: Refactor hfi_user_exp_rcv_clear() IOCTLsMichael J. Ruhl1-12/+37
The IOCTL is a bit unwieldy. Refactor to a common pattern. Refactor the _TID_FREE IOCTL. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-29IB/hfi1: Refactor hfi_user_exp_rcv_setup() IOCTLMichael J. Ruhl1-21/+45
The IOCTL is a bit unwieldy. Refactor to a common pattern. Refactor the _TID_UPDATE IOCTL. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-29IB/hfi1: Refactor get_base_infoMichael J. Ruhl1-12/+12
The IOCTL is a bit unwieldy. Refactor to a common pattern. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-29IB/hfi1: Fix parenthesis alignment issuesMichael J. Ruhl1-12/+12
In preparation to refactoring get_base_info(), cleanup some checkpatch issues. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-29IB/hfi1: Refactor get_ctxt_infoMichael J. Ruhl1-10/+10
The IOCTL is a bit unwieldy. Refactor to a common pattern. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-29IB/hfi1: Refactor assign_ctxt() IOCTLMichael J. Ruhl1-17/+19
The IOCTL is a bit unwieldy. Refactor to a common pattern. Refactor the assign_ctxt() IOCTL. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: Add a safe wrapper for _rcd_get_by_indexMichael J. Ruhl5-5/+28
hfi1_rcd_get_by_index assumes that the given index is in the correct range. In most cases this is correct because the index is bounded by a loop. For these cases, adding a range check to the function is redundant. For the use case that is not bounded by the loop range, a _safe wrapper function is needed to validate the index before accessing the rcd array. Add a _safe wrapper to _get_by_index to validate the index range. Update appropriate call sites with the new _safe function. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: Extend input hdr tracing for packet typeMike Marciniszyn4-44/+44
The etype field from the rhf can have more values than just IB and BYPASS. Extend the current tracing to report a symbolic for the etype field for non-bypass packets. Bypass packets will continue to report the l2. As part of this fix the etype and the l2 are added to the tracing struct and are available for trigger and filter operations. Fixes: Commit 863cf89d472f ("IB/hfi1: Add 16B trace support") Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: Remove unused hfi1_cpulist variablesJan Sokolowski2-18/+0
Following variables: hfi1_cpulist and hfi1_cpulist_count are unused. Remove them. Reviewed-by: Harish Chegondi <harish.chegondi@intel.com> Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: Inline common calculationMichael J. Ruhl3-17/+16
Calculating the offset to a context is done several times throughout the code. Create a common inlined function for doing this calculation. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: Remove unnecessary error messages on alloc failuresJan Sokolowski1-6/+0
Per-cpu variables int_counter, rcv_limit, and send_schedule print unnecessary error messages on failed allocations. Remove the error messages. Reviewed-by: Harish Chegondi <harish.chegondi@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: Remove unused link_default variableIra Weiny2-7/+5
devdata->link_default is no longer variable Maintain number of holes by moving dc_shutdown Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: Set default_desc1 just one timeIra Weiny1-7/+7
There is no reason to set the default descriptor flag on every SDMA engine initialization. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: Update HFI to use the latest PCI APIMichael J. Ruhl2-39/+21
The HFI PCI IRQ code uses an obsolete PCI API. Update the code to use the new PCI IRQ API and any necessary changes because of the new API. Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: Remove the debug trace message in pin_sdma_pages()Harish Chegondi1-3/+1
Remove the debug trace statement in pin_sdma_pages() that gets executed when there is a memory allocation failure as the trace message doesn't help with debugging the memory allocation failure. Cc: Leon Romanovsky <leon@kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: Convert the macro AHG_HEADER_SET into an inline functionHarish Chegondi2-28/+59
AHG_HEADER_SET macro doesn't conform to the coding standards as it can affect the control flow. Convert the macro AHG_HEADER_SET into an inline function ahg_header_set(). Cc: Leon Romanovsky <leon@kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: Add new state complete decodes for LNI failuresJakub Byczkowski1-0/+4
Add state decodes for link width negotiation, verify cap time out and secure data resolution failures. Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: Unsuccessful PCIe caps tuning should not fail driver loadHarish Chegondi1-29/+21
Failure to tune PCIe capabilities should not fail driver load. This can cause the driver load to fail on systems with any of the following: 1. HFI's parent is not root. Example: HFI card is behind a PCIe bridge. 2. HFI's parent is not PCI Express capable. In these situations, failure to tune PCIe capabilities should be logged in the system message logs but not cause the driver load to fail. This patch also ensures pcie capability word DevCtl is written only after a successful read and the capability tuning process continues even if read/write of the pcie capability word DevCtl fails. Fixes: c53df62c7a9a ("IB/hfi1: Check return values from PCI config API calls") Fixes: bf70a7757736 ("staging/rdma/hfi1: Enable WFR PCIe extended tags from the driver") Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: On error, fix use after free during user context setupMichael J. Ruhl1-19/+22
During base context setup, if setup_base_ctxt() fails, the context is deallocated. This is incorrect because the context is referenced on return, to notify any waiting subcontext. If there are no subcontexts the pointer will be invalid. Reorganize the error path so that deallocate_ctxt() is called after all the possible subcontexts have been notified. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: Return correct value in general interrupt handlerKamenee Arumugam1-1/+3
The general interrupt handler returns IRQ_HANDLED whether an IRQ was handled or not. Determine if an IRQ was handled and return the correct value. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: Check eeprom config partition validityJan Sokolowski1-5/+15
Relying on a trailing magic value is incorrect. There are instances where this is not present as trailing magic value has a specific purpose which is not partition validation. Instead use the header magic value which is present in all variants of the platform configuration and is intended for validation. This is also used in other locations in the driver. Fixes: bc5214ee2922 (IB/hfi1: Handle missing magic values in config file) Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: Only reset QSFP after link up and turn off AOC TXSebastian Sanchez3-3/+15
QSFP reset enables AOC transmitters by default. They should be off before moving to high power mode to complete the setup. There is no need to reset the QSFP during LNI failure as it was reset at link down. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: Turn off AOC TX after offline substatesSebastian Sanchez2-21/+65
Offline.quietDuration was added in the 8051 firmware, and the driver only turns off the AOC transmitters when offline.quiet is reached. However, the AOC transmitters need to be turned off at the new state. Therefore, turn off the AOC transmitters at any offline substates including offline.quiet and offline.quietDuration, then recheck we reached offline.quiet to support backwards compatibility. Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-09lib/interval_tree: fast overlap detectionDavidlohr Bueso1-5/+5
Allow interval trees to quickly check for overlaps to avoid unnecesary tree lookups in interval_tree_iter_first(). As of this patch, all interval tree flavors will require using a 'rb_root_cached' such that we can have the leftmost node easily available. While most users will make use of this feature, those with special functions (in addition to the generic insert, delete, search calls) will avoid using the cached option as they can do funky things with insertions -- for example, vma_interval_tree_insert_after(). [jglisse@redhat.com: fix deadlock from typo vm_lock_anon_vma()] Link: http://lkml.kernel.org/r/20170808225719.20723-1-jglisse@redhat.com Link: http://lkml.kernel.org/r/20170719014603.19029-12-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Doug Ledford <dledford@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Jason Wang <jasowang@redhat.com> Cc: Christian Benvenuti <benve@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-04Merge tag 'for-linus-ioctl' of ↵Linus Torvalds53-3072/+6025
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "This is a big pull request. Of note is that I'm sending you the new ioctl API for the rdma subsystem. We put it up on linux-api@, but didn't get much response. The API is complex, but it solves two different problems in one go: 1) The bi-directional nature of the RDMA file write calls, which created the security hole we had to handle (and for which the fix is now causing problems for systems in production, we were a bit over zealous in the fix and the ability to open a device, then fork, then create new queue pairs on the device and use them is broken). 2) The bloat caused by different vendors implementing extensions to the base verbs API. Each vendor's hardware is slightly different, and the hardware might be suitable for one extension but not another. By the time we add generic extensions for all the different ways that the different hardware can offload things, the API becomes bloated. Things like our completion structs have started to exceed a cache line in size because of all the elements needed to support this. That in turn shows up heavily in the performance graphs with a noticable drop in performance on 100Gigabit links as our completion structs go from occupying one cache line to 1+. This API makes things like the completion structs modular in a very similar way to netlink so that your structs can only include the items needed for the offloads/features you are actually using on a given queue pair. In that way we support everything, but only use what we need, and our structs stay smaller. The ioctl API is better explained by the posting on linux-api@ than I can explain it here, so I'll just leave it at that. The rest of the pull request is typical stuff. Updates for 4.14 kernel merge window - Lots of hfi1 driver updates (mixed with a few qib and core updates as well) - rxe updates - various mlx updates - Set default roce type to RoCEv2 - Several larger fixes for bnxt_re that were too big for -rc - Several larger fixes for qedr that, likewise, were too big for -rc - Misc core changes - Make the hns_roce driver compilable on arches other than aarch64 so we can more easily debug build issues related to it - Add rdma-netlink infrastructure updates - Add automatic IRQ affinity infrastructure - Add 32bit lid support - Lots of misc fixes across the subsystem from random people - Autoloading of RDMA netlink modules - PCI pool cleanups from Romain Perier - mlx5 driver feature additions and fixes - Hardware tag matchine feature - Fix sleeping in atomic when resolving roce ah - Add experimental ioctl interface as posted to linux-api@" * tag 'for-linus-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (328 commits) IB/core: Expose ioctl interface through experimental Kconfig IB/core: Assign root to all drivers IB/core: Add completion queue (cq) object actions IB/core: Add legacy driver's user-data IB/core: Export ioctl enum types to user-space IB/core: Explicitly destroy an object while keeping uobject IB/core: Add macros for declaring methods and attributes IB/core: Add uverbs merge trees functionality IB/core: Add DEVICE object and root tree structure IB/core: Declare an object instead of declaring only type attributes IB/core: Add new ioctl interface RDMA/vmw_pvrdma: Fix a signedness RDMA/vmw_pvrdma: Report network header type in WC IB/core: Add might_sleep() annotation to ib_init_ah_from_wc() IB/cm: Fix sleeping in atomic when RoCE is used IB/core: Add support to finalize objects in one transaction IB/core: Add a generic way to execute an operation on a uobject Documentation: Hardware tag matching IB/mlx5: Support IB_SRQT_TM net/mlx5: Add XRQ support ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-15 00:42:30 +0300