summaryrefslogtreecommitdiff
path: root/drivers/infiniband/core
AgeCommit message (Collapse)AuthorFilesLines
2018-03-23IB/cma: Resolve route only while receiving CM requestsParav Pandit3-0/+11
Currently CM request for RoCE follows following flow. rdma_create_id() rdma_resolve_addr() rdma_resolve_route() For RC QPs: rdma_connect() ->cma_connect_ib() ->ib_send_cm_req() ->cm_init_av_by_path() ->ib_init_ah_attr_from_path() For UD QPs: rdma_connect() ->cma_resolve_ib_udp() ->ib_send_cm_sidr_req() ->cm_init_av_by_path() ->ib_init_ah_attr_from_path() In both the flows, route is already resolved before sending CM requests. Therefore, code is refactored to avoid resolving route second time in ib_cm layer. ib_init_ah_attr_from_path() is extended to resolve route when it is not yet resolved for RoCE link layer. This is achieved by caller setting route_resolved field in path record whenever it has route already resolved. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller6-41/+65
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22IB/core: Refer to RoCE port property instead of GID table propertyParav Pandit1-1/+1
ib_query_gid() in commit [1] refers to RoCE GID table capability of the HCA using rdma_cap_roce_gid_table(). ib_core maintains the GID table cache regardless of the HCA provider drivers capability to maintain RoCE GID table. Therefore, whether to return a GID table entry from the software cache or from HCA should be done based on whether the port is RoCE or not. [1] commit 03db3a2d81e6 ("IB/core: Add RoCE GID table management") Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-22RDMA/restrack: Remove ambiguity in resource track clean logicLeon Romanovsky1-1/+44
The restrack clean routine had simple, but powerful WARN_ON check to see if all resources are cleared prior to releasing device. The WARN_ON check performed very well, but lack of information which device caused to resource leak, the object type and origin made debug to be fun and challenging at the same time. The fact that all dumps were the same because restrack_clean() is called in dealloc() didn't help either. So let's fix spelling error and convert WARN_ON to be more debug friendly. The dmesg cut below gives example of how the output will look output for the case fixed in patch [1] [ 438.421372] restrack: ------------[ cut here ]------------ [ 438.423448] restrack: BUG: RESTRACK detected leak of resources on mlx5_2 [ 438.425600] restrack: Kernel PD object allocated by mlx5_ib is not freed [ 438.427753] restrack: Kernel CQ object allocated by mlx5_ib is not freed [ 438.429660] restrack: ------------[ cut here ]------------ [1] https://patchwork.kernel.org/patch/10298695/ Cc: Michal Kalderon <Michal.Kalderon@cavium.com> Cc: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-21RDMA/ucma: Correct option size check using optlenChien Tin Tung1-1/+1
The option size check is using optval instead of optlen causing the set option call to fail. Use the correct field, optlen, for size check. Fixes: 6a21dfc0d0db ("RDMA/ucma: Limit possible option size") Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-21RDMA/restrack: Move restrack_clean to be symmetrical to restrack_initLeon Romanovsky1-2/+1
The fact that resource tracking commit 02d8883f520e ("RDMA/restrack: Add general infrastructure to track RDMA resources") was added immediately after commit 16c1975f1032 ("IB/mlx5: Create profile infrastructure to add and remove stages") caused us to miss the fact that PD and CQ are created after ib_register_device, but released after ib_unregister_device() and not before as it is expected from normal flow. Fix introduced in commit 42cea83f9524 ("IB/mlx5: Fix cleanup order on unload") revealed this fact, so this patch is needed to avoid from restrack warnings It fixes resource tracking warnings during shutdown. [ 43.473906] CPU: 5 PID: 3016 Comm: modprobe Not tainted 4.16.0-rc5-for-linust-perf-2018-03-19_07-01-58-14 #1 [ 43.473907] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 43.473919] RIP: 0010:rdma_restrack_clean+0x25/0x30 [ib_core] [ 43.473921] RSP: 0018:ffffc9000267be48 EFLAGS: 00010282 [ 43.473924] RAX: 0000000000000000 RBX: ffff88033c690070 RCX: 0000000180080006 [ 43.473925] RDX: ffff88035ce922e0 RSI: ffffea000cf1a200 RDI: ffff88033c6907c8 [ 43.473926] RBP: ffff88033c690070 R08: ffff88033c689000 R09: 0000000180080006 [ 43.473927] R10: 000000003c68a001 R11: ffff88033c689000 R12: ffff88033c690000 [ 43.473929] R13: ffff88033c69005c R14: 0000000000000000 R15: 0000000000000000 [ 43.473932] FS: 00007f5928359740(0000) GS:ffff88036c540000(0000) knlGS:0000000000000000 [ 43.473933] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 43.473935] CR2: 00007ffffc760cc8 CR3: 000000035620c000 CR4: 00000000000006e0 [ 43.473940] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 43.473941] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 43.473942] Call Trace: [ 43.473969] ib_unregister_device+0xf5/0x190 [ib_core] [ 43.474000] __mlx5_ib_remove+0x2e/0x40 [mlx5_ib] [ 43.474098] mlx5_remove_device+0xf5/0x120 [mlx5_core] [ 43.474132] mlx5_unregister_interface+0x37/0x90 [mlx5_core] [ 43.474142] mlx5_ib_cleanup+0xc/0x16a [mlx5_ib] [ 43.474152] SyS_delete_module+0x159/0x260 [ 43.474159] do_syscall_64+0x61/0x110 [ 43.474165] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 43.474168] RIP: 0033:0x7f59278466b7 [ 43.474170] RSP: 002b:00007ffffc763e38 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0 [ 43.474172] RAX: ffffffffffffffda RBX: 000000000130d590 RCX: 00007f59278466b7 [ 43.474173] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000000000130d5f8 [ 43.474175] RBP: 0000000000000000 R08: 00007f5927b0b060 R09: 00007f59278b6a40 [ 43.474176] R10: 00007ffffc763bc0 R11: 0000000000000202 R12: 0000000000000000 [ 43.474177] R13: 0000000000000001 R14: 000000000130d5f8 R15: 0000000000000000 [ 43.474179] Code: 84 00 00 00 00 00 0f 1f 44 00 00 48 83 c7 28 31 c0 eb 0c 48 83 c0 08 48 3d 00 08 00 00 74 0f 48 8d 14 07 48 8b 12 48 85 d2 74 e8 <0f> 0b c3 f3 c3 66 0f 1f 44 00 00 0f 1f 44 00 00 53 48 8b 47 28 [ 43.474221] ---[ end trace e89771e2250ffc23 ]--- Fixes: 42cea83f9524 ("IB/mlx5: Fix cleanup order on unload") Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-20RDMA/ucma: Ensure that CM_ID exists prior to access itLeon Romanovsky1-6/+9
Prior to access UCMA commands, the context should be initialized and connected to CM_ID with ucma_create_id(). In case user skips this step, he can provide non-valid ctx without CM_ID and cause to multiple NULL dereferences. Also there are situations where the create_id can be raced with other user access, ensure that the context is only shared to other threads once it is fully initialized to avoid the races. [ 109.088108] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 109.090315] IP: ucma_connect+0x138/0x1d0 [ 109.092595] PGD 80000001dc02d067 P4D 80000001dc02d067 PUD 1da9ef067 PMD 0 [ 109.095384] Oops: 0000 [#1] SMP KASAN PTI [ 109.097834] CPU: 0 PID: 663 Comm: uclose Tainted: G B 4.16.0-rc1-00062-g2975d5de6428 #45 [ 109.100816] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 109.105943] RIP: 0010:ucma_connect+0x138/0x1d0 [ 109.108850] RSP: 0018:ffff8801c8567a80 EFLAGS: 00010246 [ 109.111484] RAX: 0000000000000000 RBX: 1ffff100390acf50 RCX: ffffffff9d7812e2 [ 109.114496] RDX: 1ffffffff3f507a5 RSI: 0000000000000297 RDI: 0000000000000297 [ 109.117490] RBP: ffff8801daa15600 R08: 0000000000000000 R09: ffffed00390aceeb [ 109.120429] R10: 0000000000000001 R11: ffffed00390aceea R12: 0000000000000000 [ 109.123318] R13: 0000000000000120 R14: ffff8801de6459c0 R15: 0000000000000118 [ 109.126221] FS: 00007fabb68d6700(0000) GS:ffff8801e5c00000(0000) knlGS:0000000000000000 [ 109.129468] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 109.132523] CR2: 0000000000000020 CR3: 00000001d45d8003 CR4: 00000000003606b0 [ 109.135573] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 109.138716] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 109.142057] Call Trace: [ 109.144160] ? ucma_listen+0x110/0x110 [ 109.146386] ? wake_up_q+0x59/0x90 [ 109.148853] ? futex_wake+0x10b/0x2a0 [ 109.151297] ? save_stack+0x89/0xb0 [ 109.153489] ? _copy_from_user+0x5e/0x90 [ 109.155500] ucma_write+0x174/0x1f0 [ 109.157933] ? ucma_resolve_route+0xf0/0xf0 [ 109.160389] ? __mod_node_page_state+0x1d/0x80 [ 109.162706] __vfs_write+0xc4/0x350 [ 109.164911] ? kernel_read+0xa0/0xa0 [ 109.167121] ? path_openat+0x1b10/0x1b10 [ 109.169355] ? fsnotify+0x899/0x8f0 [ 109.171567] ? fsnotify_unmount_inodes+0x170/0x170 [ 109.174145] ? __fget+0xa8/0xf0 [ 109.177110] vfs_write+0xf7/0x280 [ 109.179532] SyS_write+0xa1/0x120 [ 109.181885] ? SyS_read+0x120/0x120 [ 109.184482] ? compat_start_thread+0x60/0x60 [ 109.187124] ? SyS_read+0x120/0x120 [ 109.189548] do_syscall_64+0xeb/0x250 [ 109.192178] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 109.194725] RIP: 0033:0x7fabb61ebe99 [ 109.197040] RSP: 002b:00007fabb68d5e98 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 109.200294] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fabb61ebe99 [ 109.203399] RDX: 0000000000000120 RSI: 00000000200001c0 RDI: 0000000000000004 [ 109.206548] RBP: 00007fabb68d5ec0 R08: 0000000000000000 R09: 0000000000000000 [ 109.209902] R10: 0000000000000000 R11: 0000000000000202 R12: 00007fabb68d5fc0 [ 109.213327] R13: 0000000000000000 R14: 00007fff40ab2430 R15: 00007fabb68d69c0 [ 109.216613] Code: 88 44 24 2c 0f b6 84 24 6e 01 00 00 88 44 24 2d 0f b6 84 24 69 01 00 00 88 44 24 2e 8b 44 24 60 89 44 24 30 e8 da f6 06 ff 31 c0 <66> 41 83 7c 24 20 1b 75 04 8b 44 24 64 48 8d 74 24 20 4c 89 e7 [ 109.223602] RIP: ucma_connect+0x138/0x1d0 RSP: ffff8801c8567a80 [ 109.226256] CR2: 0000000000000020 Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace") Reported-by: <syzbot+36712f50b0552615bf59@syzkaller.appspotmail.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/uverbs: Enable ioctl() uAPI by default for new verbsMatan Barak2-4/+2
Enable the ioctl() uAPI for IB by default if the standard write() uAPI (INFINIBAND_USER_ACCESS) is enabled. Verbs that are also available under the old write() uAPI are put inside a new INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI Kconfig. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/uverbs: Move ioctl path of create_cq and destroy_cq to a new fileMatan Barak4-177/+215
Currently, all objects are declared in uverbs_std_types. This could lead to a huge file once we implement all objects, methods and handlers. Moving each object to its own file to keep the files smaller and more readable. uverbs_std_types.c will only contain the parsing tree definition and objects without any methods. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/uverbs: Expose parsing tree of all common objects to providersMatan Barak2-14/+35
The ioctl() based uverbs is based on merging feature trees. This teaches the generic parser how to parse methods according to the provider's support. In order to support merging with the common objects, exporting the common-object-tree to the provider drivers. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/uverbs: Safely extend existing attributesMatan Barak3-11/+37
Previously, we've used UVERBS_ATTR_SPEC_F_MIN_SZ for extending existing attributes. The behavior of this flag was the kernel accepts anything bigger than the minimum size it specified. This is unsafe, since in order to safely extend an attribute, we need to make sure unknown size is zeroed. Replacing UVERBS_ATTR_SPEC_F_MIN_SZ with UVERBS_ATTR_SPEC_F_MIN_SZ_OR_ZERO, which essentially checks that the unknown size is zero. In addition, attributes are now decorated with UVERBS_ATTR_TYPE and UVERBS_ATTR_STRUCT, so we can provide the minimum and known length. Users of this flag needs to use copy_from_or_zero functions/macros. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/uverbs: Enable compact representation of uverbs_attr_specMatan Barak1-2/+2
Downstream patches extend uverbs_attr_spec with new fields. In order to save space, we move the type and flags fields to the various attribute flavors contained in the union. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/uverbs: Extend uverbs_ioctl header with driver_idMatan Barak1-1/+4
Extending uverbs_ioctl header with driver_id and another reserved field. driver_id should be used in order to identify the driver. Since every driver could have its own parsing tree, this is necessary for strace support. Downstream patches take off the EXPERIMENTAL flag from the ioctl() IB support and thus we add some reserved fields for future usage. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/uverbs: Move to new headers and make naming consistentMatan Barak3-144/+153
Use macros to make names consistent in ioctl() uAPI: The ioctl() uAPI works with object-method hierarchy. The method part also states which handler should be executed when this method is called from user-space. Therefore, we need to tie method, method's id, method's handler and the object owning this method together. Previously, this was done through explicit developer chosen names. This makes grepping the code harder. Changing the method's name, method's handler and object's name to be automatically generated based on the ids. The headers are split in a way so they be included and used by user-space. One header strictly contains structures that are used directly by user-space applications, where another header is used for internal library (i.e. libibverbs) to form the ioctl() commands. Other header simply contains the required general command structure. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19RDMA/ucma: Fix use-after-free access in ucma_closeLeon Romanovsky1-0/+3
The error in ucma_create_id() left ctx in the list of contexts belong to ucma file descriptor. The attempt to close this file descriptor causes to use-after-free accesses while iterating over such list. Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace") Reported-by: <syzbot+dcfd344365a56fbebd0f@syzkaller.appspotmail.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/core: Use rdma_is_port_valid()Parav Pandit1-3/+2
Use rdma_is_port_valid() which performs port validity check instead of open coding the same check. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/core: Set speed string to SDR for invalid active ratesHonggang Li1-0/+1
Before commit f1b65df5a232 ("IB/mlx5: Add support for active_width and active_speed in RoCE"), the mlx5_ib driver set default active_width and active_speed to IB_WIDTH_4X and IB_SPEED_QDR. Now, the active_width and active_speed are zeros if the RoCE port is in DOWN state. The speed string should be set to " SDR" instead of a blank string when active_speed is zero. Signed-off-by: Honggang Li <honli@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-17RDMA/restrack: Don't rely on uninitialized variable in restrack_add flowLeon Romanovsky1-1/+3
The restrack code relies on the fact that object structures are zeroed at the allocation stage, the mlx4 CQ wasn't allocated with kzalloc and it caused to the following crash. [ 137.392209] general protection fault: 0000 [#1] SMP KASAN PTI [ 137.392972] CPU: 0 PID: 622 Comm: ibv_rc_pingpong Tainted: G W 4.16.0-rc1-00099-g00313983cda6 #11 [ 137.395079] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 [ 137.396866] RIP: 0010:rdma_restrack_del+0xc8/0xf0 [ 137.397762] RSP: 0018:ffff8801b54e7968 EFLAGS: 00010206 [ 137.399008] RAX: 0000000000000000 RBX: ffff8801d8bcbae8 RCX: ffffffffb82314df [ 137.400055] RDX: dffffc0000000000 RSI: dffffc0000000000 RDI: 70696b533d454741 [ 137.401103] RBP: ffff8801d90c07a0 R08: ffff8801d8bcbb00 R09: 0000000000000000 [ 137.402470] R10: 0000000000000001 R11: ffffed0036a9cf52 R12: ffff8801d90c0ad0 [ 137.403318] R13: ffff8801d853fb20 R14: ffff8801d8bcbb28 R15: 0000000000000014 [ 137.404736] FS: 00007fb415d43740(0000) GS:ffff8801e5c00000(0000) knlGS:0000000000000000 [ 137.406074] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 137.407101] CR2: 00007fb41557df20 CR3: 00000001b580c001 CR4: 00000000003606b0 [ 137.408308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 137.409352] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 137.410385] Call Trace: [ 137.411058] ib_destroy_cq+0x23/0x60 [ 137.411460] uverbs_free_cq+0x37/0xa0 [ 137.412040] remove_commit_idr_uobject+0x38/0xf0 [ 137.413042] _rdma_remove_commit_uobject+0x5c/0x160 [ 137.413782] ? lookup_get_idr_uobject+0x39/0x50 [ 137.414737] rdma_remove_commit_uobject+0x3b/0x70 [ 137.415742] ib_uverbs_destroy_cq+0x114/0x1d0 [ 137.416260] ? ib_uverbs_req_notify_cq+0x160/0x160 [ 137.417073] ? kernel_text_address+0x5c/0x90 [ 137.417805] ? __kernel_text_address+0xe/0x30 [ 137.418766] ? unwind_get_return_address+0x2f/0x50 [ 137.419558] ib_uverbs_write+0x453/0x6a0 [ 137.420220] ? show_ibdev+0x90/0x90 [ 137.420653] ? __kasan_slab_free+0x136/0x180 [ 137.421155] ? kmem_cache_free+0x78/0x1e0 [ 137.422192] ? remove_vma+0x83/0x90 [ 137.422614] ? do_munmap+0x447/0x6c0 [ 137.423045] ? vm_munmap+0xb0/0x100 [ 137.423481] ? SyS_munmap+0x1d/0x30 [ 137.424120] ? do_syscall_64+0xeb/0x250 [ 137.424984] ? entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 137.425611] ? lru_add_drain_all+0x270/0x270 [ 137.426116] ? lru_add_drain_cpu+0xa3/0x170 [ 137.426616] ? lru_add_drain+0x11/0x20 [ 137.427058] ? free_pages_and_swap_cache+0xa6/0x120 [ 137.427672] ? tlb_flush_mmu_free+0x78/0x90 [ 137.428168] ? arch_tlb_finish_mmu+0x6d/0xb0 [ 137.428680] __vfs_write+0xc4/0x350 [ 137.430917] ? kernel_read+0xa0/0xa0 [ 137.432758] ? remove_vma+0x90/0x90 [ 137.434781] ? __kasan_slab_free+0x14b/0x180 [ 137.437486] ? remove_vma+0x83/0x90 [ 137.439836] ? kmem_cache_free+0x78/0x1e0 [ 137.442195] ? percpu_counter_add_batch+0x1d/0x90 [ 137.444389] vfs_write+0xf7/0x280 [ 137.446030] SyS_write+0xa1/0x120 [ 137.447867] ? SyS_read+0x120/0x120 [ 137.449670] ? mm_fault_error+0x180/0x180 [ 137.451539] ? _cond_resched+0x16/0x50 [ 137.453697] ? SyS_read+0x120/0x120 [ 137.455883] do_syscall_64+0xeb/0x250 [ 137.457686] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 137.459595] RIP: 0033:0x7fb415637b94 [ 137.461315] RSP: 002b:00007ffdebea7d88 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 137.463879] RAX: ffffffffffffffda RBX: 00005565022d1bd0 RCX: 00007fb415637b94 [ 137.466519] RDX: 0000000000000018 RSI: 00007ffdebea7da0 RDI: 0000000000000003 [ 137.469543] RBP: 00007ffdebea7d98 R08: 0000000000000000 R09: 00005565022d40c0 [ 137.472479] R10: 00000000000009cf R11: 0000000000000246 R12: 00005565022d2520 [ 137.475125] R13: 00000000000003e8 R14: 0000000000000000 R15: 00007ffdebea7fd0 [ 137.477760] Code: f7 e8 dd 0d 0b ff 48 c7 43 40 00 00 00 00 48 89 df e8 0d 0b 0b ff 48 8d 7b 28 c6 03 00 e8 41 0d 0b ff 48 8b 7b 28 48 85 ff 74 06 <f0> ff 4f 48 74 10 5b 48 89 ef 5d 41 5c 41 5d 41 5e e9 32 b0 ee [ 137.483375] RIP: rdma_restrack_del+0xc8/0xf0 RSP: ffff8801b54e7968 [ 137.486436] ---[ end trace 81835a1ea6722eed ]--- [ 137.488566] Kernel panic - not syncing: Fatal exception [ 137.491162] Kernel Offset: 0x36000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: 00313983cda6 ("RDMA/nldev: provide detailed CM_ID information") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-16RDMA/ucma: Check AF family prior resolving addressLeon Romanovsky1-3/+7
Garbage supplied by user will cause to UCMA module provide zero memory size for memcpy(), because it wasn't checked, it will produce unpredictable results in rdma_resolve_addr(). [ 42.873814] BUG: KASAN: null-ptr-deref in rdma_resolve_addr+0xc8/0xfb0 [ 42.874816] Write of size 28 at addr 00000000000000a0 by task resaddr/1044 [ 42.876765] [ 42.876960] CPU: 1 PID: 1044 Comm: resaddr Not tainted 4.16.0-rc1-00057-gaa56a5293d7e #34 [ 42.877840] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 42.879691] Call Trace: [ 42.880236] dump_stack+0x5c/0x77 [ 42.880664] kasan_report+0x163/0x380 [ 42.881354] ? rdma_resolve_addr+0xc8/0xfb0 [ 42.881864] memcpy+0x34/0x50 [ 42.882692] rdma_resolve_addr+0xc8/0xfb0 [ 42.883366] ? deref_stack_reg+0x88/0xd0 [ 42.883856] ? vsnprintf+0x31a/0x770 [ 42.884686] ? rdma_bind_addr+0xc40/0xc40 [ 42.885327] ? num_to_str+0x130/0x130 [ 42.885773] ? deref_stack_reg+0x88/0xd0 [ 42.886217] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [ 42.887698] ? unwind_get_return_address_ptr+0x50/0x50 [ 42.888302] ? replace_slot+0x147/0x170 [ 42.889176] ? delete_node+0x12c/0x340 [ 42.890223] ? __radix_tree_lookup+0xa9/0x160 [ 42.891196] ? ucma_resolve_ip+0xb7/0x110 [ 42.891917] ucma_resolve_ip+0xb7/0x110 [ 42.893003] ? ucma_resolve_addr+0x190/0x190 [ 42.893531] ? _copy_from_user+0x5e/0x90 [ 42.894204] ucma_write+0x174/0x1f0 [ 42.895162] ? ucma_resolve_route+0xf0/0xf0 [ 42.896309] ? dequeue_task_fair+0x67e/0xd90 [ 42.897192] ? put_prev_entity+0x7d/0x170 [ 42.897870] ? ring_buffer_record_is_on+0xd/0x20 [ 42.898439] ? tracing_record_taskinfo_skip+0x20/0x50 [ 42.899686] __vfs_write+0xc4/0x350 [ 42.900142] ? kernel_read+0xa0/0xa0 [ 42.900602] ? firmware_map_remove+0xdf/0xdf [ 42.901135] ? do_task_dead+0x5d/0x60 [ 42.901598] ? do_exit+0xcc6/0x1220 [ 42.902789] ? __fget+0xa8/0xf0 [ 42.903190] vfs_write+0xf7/0x280 [ 42.903600] SyS_write+0xa1/0x120 [ 42.904206] ? SyS_read+0x120/0x120 [ 42.905710] ? compat_start_thread+0x60/0x60 [ 42.906423] ? SyS_read+0x120/0x120 [ 42.908716] do_syscall_64+0xeb/0x250 [ 42.910760] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 42.912735] RIP: 0033:0x7f138b0afe99 [ 42.914734] RSP: 002b:00007f138b799e98 EFLAGS: 00000287 ORIG_RAX: 0000000000000001 [ 42.917134] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f138b0afe99 [ 42.919487] RDX: 000000000000002e RSI: 0000000020000c40 RDI: 0000000000000004 [ 42.922393] RBP: 00007f138b799ec0 R08: 00007f138b79a700 R09: 0000000000000000 [ 42.925266] R10: 00007f138b79a700 R11: 0000000000000287 R12: 00007f138b799fc0 [ 42.927570] R13: 0000000000000000 R14: 00007ffdbae757c0 R15: 00007f138b79a9c0 [ 42.930047] [ 42.932681] Disabling lock debugging due to kernel taint [ 42.934795] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 [ 42.936939] IP: memcpy_erms+0x6/0x10 [ 42.938864] PGD 80000001bea92067 P4D 80000001bea92067 PUD 1bea96067 PMD 0 [ 42.941576] Oops: 0002 [#1] SMP KASAN PTI [ 42.943952] CPU: 1 PID: 1044 Comm: resaddr Tainted: G B 4.16.0-rc1-00057-gaa56a5293d7e #34 [ 42.946964] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 42.952336] RIP: 0010:memcpy_erms+0x6/0x10 [ 42.954707] RSP: 0018:ffff8801c8b479c8 EFLAGS: 00010286 [ 42.957227] RAX: 00000000000000a0 RBX: ffff8801c8b47ba0 RCX: 000000000000001c [ 42.960543] RDX: 000000000000001c RSI: ffff8801c8b47bbc RDI: 00000000000000a0 [ 42.963867] RBP: ffff8801c8b47b60 R08: 0000000000000000 R09: ffffed0039168ed1 [ 42.967303] R10: 0000000000000001 R11: ffffed0039168ed0 R12: ffff8801c8b47bbc [ 42.970685] R13: 00000000000000a0 R14: 1ffff10039168f4a R15: 0000000000000000 [ 42.973631] FS: 00007f138b79a700(0000) GS:ffff8801e5d00000(0000) knlGS:0000000000000000 [ 42.976831] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 42.979239] CR2: 00000000000000a0 CR3: 00000001be908002 CR4: 00000000003606a0 [ 42.982060] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 42.984877] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 42.988033] Call Trace: [ 42.990487] rdma_resolve_addr+0xc8/0xfb0 [ 42.993202] ? deref_stack_reg+0x88/0xd0 [ 42.996055] ? vsnprintf+0x31a/0x770 [ 42.998707] ? rdma_bind_addr+0xc40/0xc40 [ 43.000985] ? num_to_str+0x130/0x130 [ 43.003410] ? deref_stack_reg+0x88/0xd0 [ 43.006302] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [ 43.008780] ? unwind_get_return_address_ptr+0x50/0x50 [ 43.011178] ? replace_slot+0x147/0x170 [ 43.013517] ? delete_node+0x12c/0x340 [ 43.016019] ? __radix_tree_lookup+0xa9/0x160 [ 43.018755] ? ucma_resolve_ip+0xb7/0x110 [ 43.021270] ucma_resolve_ip+0xb7/0x110 [ 43.023968] ? ucma_resolve_addr+0x190/0x190 [ 43.026312] ? _copy_from_user+0x5e/0x90 [ 43.029384] ucma_write+0x174/0x1f0 [ 43.031861] ? ucma_resolve_route+0xf0/0xf0 [ 43.034782] ? dequeue_task_fair+0x67e/0xd90 [ 43.037483] ? put_prev_entity+0x7d/0x170 [ 43.040215] ? ring_buffer_record_is_on+0xd/0x20 [ 43.042990] ? tracing_record_taskinfo_skip+0x20/0x50 [ 43.045595] __vfs_write+0xc4/0x350 [ 43.048624] ? kernel_read+0xa0/0xa0 [ 43.051604] ? firmware_map_remove+0xdf/0xdf [ 43.055379] ? do_task_dead+0x5d/0x60 [ 43.058000] ? do_exit+0xcc6/0x1220 [ 43.060783] ? __fget+0xa8/0xf0 [ 43.063133] vfs_write+0xf7/0x280 [ 43.065677] SyS_write+0xa1/0x120 [ 43.068647] ? SyS_read+0x120/0x120 [ 43.071179] ? compat_start_thread+0x60/0x60 [ 43.074025] ? SyS_read+0x120/0x120 [ 43.076705] do_syscall_64+0xeb/0x250 [ 43.079006] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 43.081606] RIP: 0033:0x7f138b0afe99 [ 43.083679] RSP: 002b:00007f138b799e98 EFLAGS: 00000287 ORIG_RAX: 0000000000000001 [ 43.086802] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f138b0afe99 [ 43.089989] RDX: 000000000000002e RSI: 0000000020000c40 RDI: 0000000000000004 [ 43.092866] RBP: 00007f138b799ec0 R08: 00007f138b79a700 R09: 0000000000000000 [ 43.096233] R10: 00007f138b79a700 R11: 0000000000000287 R12: 00007f138b799fc0 [ 43.098913] R13: 0000000000000000 R14: 00007ffdbae757c0 R15: 00007f138b79a9c0 [ 43.101809] Code: 90 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 [ 43.107950] RIP: memcpy_erms+0x6/0x10 RSP: ffff8801c8b479c8 Reported-by: <syzbot+1d8c43206853b369d00c@syzkaller.appspotmail.com> Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-16IB/core: Move rdma_addr_find_l2_eth_by_grh to core_priv.hParav Pandit1-0/+5
Before commit [1], rdma_addr_find_l2_eth_by_grh() was an exported function and therefore declaration in include/rdma/ib_addr.h was fine. But now that its scope is limited to ib_core module, its better to have it in core_priv.h. [1] commit 1060f8653414 ("IB/{core/cm}: Fix generating a return AH for RoCEE") Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-16IB/cm: Introduce and use helper function to get cm_port from pathParav Pandit1-4/+13
Introduce and use helper function get_cm_port_from_path() to get cm_port based on the the path record entry. Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-16IB/core: Refactor ib_init_ah_attr_from_path() for RoCEParav Pandit1-96/+103
Resolving route for RoCE for a path record is needed only for the received CM requests. Therefore, (a) ib_init_ah_attr_from_path() is refactored first to isolate the code of resolving route. (b) Setting dlid, path bits is not needed for RoCE. Additionally ah attribute initialization is done from the path record entry, so it is better to refer to path record entry type for different link layer instead of ah attribute type while initializing ah attribute itself. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-16IB/cm: Add and use a helper function to add cm_id's to the port listParav Pandit1-10/+21
Add and use helper function add_cm_id_to_port_list() to attach cm_id to port list. Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-16IB/core: Remove rdma_resolve_ip_route() as exported symbolParav Pandit2-1/+6
rdma_resolve_ip_route() is used only by ib_core module. Therefore it is removed as an exported symbol. Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15IB/cma: Use rdma_protocol_roce() and remove cma_protocol_roce_dev_port()Parav Pandit1-12/+3
rdma_protocol_roce() API from the ib_core already provides a way to detect whether a given device+port is RoCE or not. Therefore, make use of it and avoid implementing it again in rdmacm module. Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15IB/core: Honor port_num while resolving GID for IB link layerParav Pandit1-14/+12
ah_attr contains the port number to which cm_id is bound. However, while searching for GID table for matching GID entry, the port number is ignored. This could cause the wrong GID to be used when the ah_attr is converted to an AH. Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15IB/core: Honor return status of ib_init_ah_from_mcmember()Parav Pandit1-4/+8
The return status of ib_init_ah_from_mcmember() is ignored by cma_ib_mc_handler(). Honor it and return error event if ah attribute initialization failed. Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15IB/{core, ipoib}: Simplify ib_find_gid() for unused ndevParav Pandit1-2/+1
ib_find_gid() is only used by IPoIB driver. For IB link layer, GID table entries are not based on netdevice. Netdevice parameter is unused here. Therefore, it is removed. Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15IB/core: Fix comments of GID query functionsParav Pandit1-2/+29
Exported symbol's comments should be with function definition and not in the header file. Therefore comments of ib_find_cached_gid() and ib_find_cached_gid_by_port() functions are moved closer to their definitions. The function name in then comment is different than the actual function name, fix it to be same as ib_cache_gid_find_by_filter(). Also current comment section of ib_find_cached_gid_by_port() contains the desciption of ib_find_cached_gid(), fix that as well. Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15Merge branch 'k.o/wip/dl-for-rc' into k.o/wip/dl-for-nextDoug Ledford6-32/+46
Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-15drivers/infiniband/core/verbs.c: fix build with gcc-4.4.4Andrew Morton1-1/+2
gcc-4.4.4 has issues with initialization of anonymous unions. drivers/infiniband/core/verbs.c: In function '__ib_drain_sq': drivers/infiniband/core/verbs.c:2204: error: unknown field 'wr_cqe' specified in initializer drivers/infiniband/core/verbs.c:2204: warning: initialization makes integer from pointer without a cast Work around this. Fixes: a1ae7d0345edd5 ("RDMA/core: Avoid that ib_drain_qp() triggers an out-of-bounds stack access") Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14RDMA/ucma: Don't allow join attempts for unsupported AF familyLeon Romanovsky1-1/+7
Users can provide garbage while calling to ucma_join_ip_multicast(), it will indirectly cause to rdma_addr_size() return 0, making the call to ucma_process_join(), which had the right checks, but it is better to check the input as early as possible. The following crash from syzkaller revealed it. kernel BUG at lib/string.c:1052! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 4113 Comm: syz-executor0 Not tainted 4.16.0-rc5+ #261 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051 RSP: 0018:ffff8801ca81f8f0 EFLAGS: 00010286 RAX: 0000000000000022 RBX: 1ffff10039503f23 RCX: 0000000000000000 RDX: 0000000000000022 RSI: 1ffff10039503ed3 RDI: ffffed0039503f12 RBP: ffff8801ca81f8f0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000006 R11: 0000000000000000 R12: ffff8801ca81f998 R13: ffff8801ca81f938 R14: ffff8801ca81fa58 R15: 000000000000fa00 FS: 0000000000000000(0000) GS:ffff8801db200000(0063) knlGS:000000000a12a900 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 0000000008138024 CR3: 00000001cbb58004 CR4: 00000000001606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: memcpy include/linux/string.h:344 [inline] ucma_join_ip_multicast+0x36b/0x3b0 drivers/infiniband/core/ucma.c:1421 ucma_write+0x2d6/0x3d0 drivers/infiniband/core/ucma.c:1633 __vfs_write+0xef/0x970 fs/read_write.c:480 vfs_write+0x189/0x510 fs/read_write.c:544 SYSC_write fs/read_write.c:589 [inline] SyS_write+0xef/0x220 fs/read_write.c:581 do_syscall_32_irqs_on arch/x86/entry/common.c:330 [inline] do_fast_syscall_32+0x3ec/0xf9f arch/x86/entry/common.c:392 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f9ec99 RSP: 002b:00000000ff8172cc EFLAGS: 00000282 ORIG_RAX: 0000000000000004 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000020000100 RDX: 0000000000000063 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 42 2c e3 fb eb de 55 48 89 fe 48 c7 c7 80 75 98 86 48 89 e5 e8 85 95 94 fb <0f> 0b 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56 RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP: ffff8801ca81f8f0 Fixes: 5bc2b7b397b0 ("RDMA/ucma: Allow user space to specify AF_IB when joining multicast") Reported-by: <syzbot+2287ac532caa81900a4e@syzkaller.appspotmail.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14RDMA/ucma: Fix access to non-initialized CM_ID objectLeon Romanovsky1-0/+3
The attempt to join multicast group without ensuring that CMA device exists will lead to the following crash reported by syzkaller. [ 64.076794] BUG: KASAN: null-ptr-deref in rdma_join_multicast+0x26e/0x12c0 [ 64.076797] Read of size 8 at addr 00000000000000b0 by task join/691 [ 64.076797] [ 64.076800] CPU: 1 PID: 691 Comm: join Not tainted 4.16.0-rc1-00219-gb97853b65b93 #23 [ 64.076802] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4 [ 64.076803] Call Trace: [ 64.076809] dump_stack+0x5c/0x77 [ 64.076817] kasan_report+0x163/0x380 [ 64.085859] ? rdma_join_multicast+0x26e/0x12c0 [ 64.086634] rdma_join_multicast+0x26e/0x12c0 [ 64.087370] ? rdma_disconnect+0xf0/0xf0 [ 64.088579] ? __radix_tree_replace+0xc3/0x110 [ 64.089132] ? node_tag_clear+0x81/0xb0 [ 64.089606] ? idr_alloc_u32+0x12e/0x1a0 [ 64.090517] ? __fprop_inc_percpu_max+0x150/0x150 [ 64.091768] ? tracing_record_taskinfo+0x10/0xc0 [ 64.092340] ? idr_alloc+0x76/0xc0 [ 64.092951] ? idr_alloc_u32+0x1a0/0x1a0 [ 64.093632] ? ucma_process_join+0x23d/0x460 [ 64.094510] ucma_process_join+0x23d/0x460 [ 64.095199] ? ucma_migrate_id+0x440/0x440 [ 64.095696] ? futex_wake+0x10b/0x2a0 [ 64.096159] ucma_join_multicast+0x88/0xe0 [ 64.096660] ? ucma_process_join+0x460/0x460 [ 64.097540] ? _copy_from_user+0x5e/0x90 [ 64.098017] ucma_write+0x174/0x1f0 [ 64.098640] ? ucma_resolve_route+0xf0/0xf0 [ 64.099343] ? rb_erase_cached+0x6c7/0x7f0 [ 64.099839] __vfs_write+0xc4/0x350 [ 64.100622] ? perf_syscall_enter+0xe4/0x5f0 [ 64.101335] ? kernel_read+0xa0/0xa0 [ 64.103525] ? perf_sched_cb_inc+0xc0/0xc0 [ 64.105510] ? syscall_exit_register+0x2a0/0x2a0 [ 64.107359] ? __switch_to+0x351/0x640 [ 64.109285] ? fsnotify+0x899/0x8f0 [ 64.111610] ? fsnotify_unmount_inodes+0x170/0x170 [ 64.113876] ? __fsnotify_update_child_dentry_flags+0x30/0x30 [ 64.115813] ? ring_buffer_record_is_on+0xd/0x20 [ 64.117824] ? __fget+0xa8/0xf0 [ 64.119869] vfs_write+0xf7/0x280 [ 64.122001] SyS_write+0xa1/0x120 [ 64.124213] ? SyS_read+0x120/0x120 [ 64.126644] ? SyS_read+0x120/0x120 [ 64.128563] do_syscall_64+0xeb/0x250 [ 64.130732] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 64.132984] RIP: 0033:0x7f5c994ade99 [ 64.135699] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 64.138740] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99 [ 64.141056] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015 [ 64.143536] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000 [ 64.146017] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0 [ 64.148608] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0 [ 64.151060] [ 64.153703] Disabling lock debugging due to kernel taint [ 64.156032] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0 [ 64.159066] IP: rdma_join_multicast+0x26e/0x12c0 [ 64.161451] PGD 80000001d0298067 P4D 80000001d0298067 PUD 1dea39067 PMD 0 [ 64.164442] Oops: 0000 [#1] SMP KASAN PTI [ 64.166817] CPU: 1 PID: 691 Comm: join Tainted: G B 4.16.0-rc1-00219-gb97853b65b93 #23 [ 64.170004] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4 [ 64.174985] RIP: 0010:rdma_join_multicast+0x26e/0x12c0 [ 64.177246] RSP: 0018:ffff8801c8207860 EFLAGS: 00010282 [ 64.179901] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff94789522 [ 64.183344] RDX: 1ffffffff2d50fa5 RSI: 0000000000000297 RDI: 0000000000000297 [ 64.186237] RBP: ffff8801c8207a50 R08: 0000000000000000 R09: ffffed0039040ea7 [ 64.189328] R10: 0000000000000001 R11: ffffed0039040ea6 R12: 0000000000000000 [ 64.192634] R13: 0000000000000000 R14: ffff8801e2022800 R15: ffff8801d4ac2400 [ 64.196105] FS: 00007f5c99b98700(0000) GS:ffff8801e5d00000(0000) knlGS:0000000000000000 [ 64.199211] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 64.202046] CR2: 00000000000000b0 CR3: 00000001d1c48004 CR4: 00000000003606a0 [ 64.205032] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 64.208221] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 64.211554] Call Trace: [ 64.213464] ? rdma_disconnect+0xf0/0xf0 [ 64.216124] ? __radix_tree_replace+0xc3/0x110 [ 64.219337] ? node_tag_clear+0x81/0xb0 [ 64.222140] ? idr_alloc_u32+0x12e/0x1a0 [ 64.224422] ? __fprop_inc_percpu_max+0x150/0x150 [ 64.226588] ? tracing_record_taskinfo+0x10/0xc0 [ 64.229763] ? idr_alloc+0x76/0xc0 [ 64.232186] ? idr_alloc_u32+0x1a0/0x1a0 [ 64.234505] ? ucma_process_join+0x23d/0x460 [ 64.237024] ucma_process_join+0x23d/0x460 [ 64.240076] ? ucma_migrate_id+0x440/0x440 [ 64.243284] ? futex_wake+0x10b/0x2a0 [ 64.245302] ucma_join_multicast+0x88/0xe0 [ 64.247783] ? ucma_process_join+0x460/0x460 [ 64.250841] ? _copy_from_user+0x5e/0x90 [ 64.253878] ucma_write+0x174/0x1f0 [ 64.257008] ? ucma_resolve_route+0xf0/0xf0 [ 64.259877] ? rb_erase_cached+0x6c7/0x7f0 [ 64.262746] __vfs_write+0xc4/0x350 [ 64.265537] ? perf_syscall_enter+0xe4/0x5f0 [ 64.267792] ? kernel_read+0xa0/0xa0 [ 64.270358] ? perf_sched_cb_inc+0xc0/0xc0 [ 64.272575] ? syscall_exit_register+0x2a0/0x2a0 [ 64.275367] ? __switch_to+0x351/0x640 [ 64.277700] ? fsnotify+0x899/0x8f0 [ 64.280530] ? fsnotify_unmount_inodes+0x170/0x170 [ 64.283156] ? __fsnotify_update_child_dentry_flags+0x30/0x30 [ 64.286182] ? ring_buffer_record_is_on+0xd/0x20 [ 64.288749] ? __fget+0xa8/0xf0 [ 64.291136] vfs_write+0xf7/0x280 [ 64.292972] SyS_write+0xa1/0x120 [ 64.294965] ? SyS_read+0x120/0x120 [ 64.297474] ? SyS_read+0x120/0x120 [ 64.299751] do_syscall_64+0xeb/0x250 [ 64.301826] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 64.304352] RIP: 0033:0x7f5c994ade99 [ 64.306711] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 64.309577] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99 [ 64.312334] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015 [ 64.315783] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000 [ 64.318365] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0 [ 64.320980] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0 [ 64.323515] Code: e8 e8 79 08 ff 4c 89 ff 45 0f b6 a7 b8 01 00 00 e8 68 7c 08 ff 49 8b 1f 4d 89 e5 49 c1 e4 04 48 8 [ 64.330753] RIP: rdma_join_multicast+0x26e/0x12c0 RSP: ffff8801c8207860 [ 64.332979] CR2: 00000000000000b0 [ 64.335550] ---[ end trace 0c00c17a408849c1 ]--- Reported-by: <syzbot+e6aba77967bd72cbc9d6@syzkaller.appspotmail.com> Fixes: c8f6a362bf3e ("RDMA/cma: Add multicast communication support") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14RDMA/core: Do not use invalid destination in determining port reuseTatyana Nikolova1-5/+7
cma_port_is_unique() allows local port reuse if the quad (source address and port, destination address and port) for this connection is unique. However, if the destination info is zero or unspecified, it can't make a correct decision but still allows port reuse. For example, sometimes rdma_bind_addr() is called with unspecified destination and reusing the port can lead to creating a connection with a duplicate quad, after the destination is resolved. The issue manifests when MPI scale-up tests hang after the duplicate quad is used. Set the destination address family and add checks for zero destination address and port to prevent source port reuse based on invalid destination. Fixes: 19b752a19dce ("IB/cma: Allow port reuse for rdma_id") Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14RDMA/verbs: Simplify modify QP checkLeon Romanovsky1-12/+8
All callers to ib_modify_qp_is_ok() provides enum ib_qp_state makes the checks of out-of-scope redundant. Let's remove them together with updating function signature to return boolean result. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14RDMA/uverbs: Ensure validity of current QP state valueLeon Romanovsky1-0/+7
The QP state is internal enum which is checked at the driver level by calling to ib_modify_qp_is_ok(). Move this check closer to user and leave kernel users to be checked by compiler. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-08RDMA/nldev: provide detailed PD informationSteve Wise1-0/+57
Implement the RDMA nldev netlink interface for dumping detailed PD information. Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-08RDMA/nldev: provide detailed MR informationSteve Wise4-13/+84
Implement the RDMA nldev netlink interface for dumping detailed MR information. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-08RDMA/nldev: provide detailed CQ informationSteve Wise1-0/+52
Implement the RDMA nldev netlink interface for dumping detailed CQ information. Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-08RDMA/nldev: provide detailed CM_ID informationSteve Wise5-38/+158
Implement RDMA nldev netlink interface to get detailed CM_ID information. Because cm_id's are attached to rdma devices in various work queue contexts, the pid and task information at restrak_add() time is sometimes not useful. For example, an nvme/f host connection cm_id ends up being bound to a device in a work queue context and the resulting pid at attach time no longer exists after connection setup. So instead we mark all cm_id's created via the rdma_ucm as "user", and all others as "kernel". This required tweaking the restrack code a little. It also required wrapping some rdma_cm functions to allow passing the module name string. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-08RDMA/CM: move rdma_id_private to cma_priv.hSteve Wise2-40/+80
Move struct rdma_id_private to a new header cma_priv.h so the resource tracking services in core/nldev.c can read useful information about cm_ids. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-08RDMA/nldev: common resource dumpit functionSteve Wise1-18/+43
Create a common dumpit function that can be used by all common resource types. This reduces code replication and simplifies the code as we add more resource types. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-08RDMA/restrack: clean up res_to_dev()Steve Wise1-19/+5
Simplify res_to_dev() to make it easier to read/maintain. Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-07RDMA/ucma: Check that user doesn't overflow QP stateLeon Romanovsky1-0/+3
The QP state is limited and declared in enum ib_qp_state, but ucma user was able to supply any possible (u32) value. Reported-by: syzbot+0df1ab766f8924b1edba@syzkaller.appspotmail.com Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-07RDMA/ucma: Limit possible option sizeLeon Romanovsky1-0/+3
Users of ucma are supposed to provide size of option level, in most paths it is supposed to be equal to u8 or u16, but it is not the case for the IB path record, where it can be multiple of struct ib_path_rec_data. This patch takes simplest possible approach and prevents providing values more than possible to allocate. Reported-by: syzbot+a38b0e9f694c379ca7ce@syzkaller.appspotmail.com Fixes: 7ce86409adcd ("RDMA/ucma: Allow user space to set service type") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-07IB/core: Fix possible crash to access NULL netdevParav Pandit1-4/+3
resolved_dev returned might be NULL as ifindex is transient number. Ignoring NULL check of resolved_dev might crash the kernel. Therefore perform NULL check before accessing resolved_dev. Additionally rdma_resolve_ip_route() invokes addr_resolve() which performs check and address translation for loopback ifindex. Therefore, checking it again in rdma_resolve_ip_route() is not helpful. Therefore, the code is simplified to avoid IFF_LOOPBACK check. Fixes: 200298326b27 ("IB/core: Validate route when we init ah") Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-07RDMA/core: Reduce poll batch for direct cq pollingMax Gurtovoy1-10/+11
Fix warning limit for kernel stack consumption: drivers/infiniband/core/cq.c: In function 'ib_process_cq_direct': drivers/infiniband/core/cq.c:78:1: error: the frame size of 1032 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Using smaller ib_wc array on the stack brings us comfortably below that limit again. Fixes: 246d8b184c10 ("IB/cq: Don't force IB_POLL_DIRECT poll context for ib_process_cq_direct") Reported-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sergey Gorenko <sergeygo@mellanox.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-07RDMA/core: Avoid that ib_drain_qp() triggers an out-of-bounds stack accessBart Van Assche1-3/+8
This patch fixes the following KASAN complaint: ================================================================== BUG: KASAN: stack-out-of-bounds in rxe_post_send+0x77d/0x9b0 [rdma_rxe] Read of size 8 at addr ffff880061aef860 by task 01/1080 CPU: 2 PID: 1080 Comm: 01 Not tainted 4.16.0-rc3-dbg+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0x85/0xc7 print_address_description+0x65/0x270 kasan_report+0x231/0x350 rxe_post_send+0x77d/0x9b0 [rdma_rxe] __ib_drain_sq+0x1ad/0x250 [ib_core] ib_drain_qp+0x9/0x30 [ib_core] srp_destroy_qp+0x51/0x70 [ib_srp] srp_free_ch_ib+0xfc/0x380 [ib_srp] srp_create_target+0x1071/0x19e0 [ib_srp] kernfs_fop_write+0x180/0x210 __vfs_write+0xb1/0x2e0 vfs_write+0xf6/0x250 SyS_write+0x99/0x110 do_syscall_64+0xee/0x2b0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 The buggy address belongs to the page: page:ffffea000186bbc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x4000000000000000() raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffffea000186bbe0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880061aef700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880061aef780: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 >ffff880061aef800: f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 f2 f2 f2 f2 ^ ffff880061aef880: f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 f2 f2 ffff880061aef900: f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Fixes: 765d67748bcf ("IB: new common API for draining queues") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: stable@vger.kernel.org Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-04net/ipv6: Pass skb to route lookupDavid Ahern1-1/+1
IPv6 does path selection for multipath routes deep in the lookup functions. The next patch adds L4 hash option and needs the skb for the forward path. To get the skb to the relevant FIB lookup functions it needs to go through the fib rules layer, so add a lookup_data argument to the fib_lookup_arg struct. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28RDMA/iwpm: Delete an error message for a failed memory allocation in ↵Markus Elfring1-3/+2
iwpm_create_nlmsg() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-16 05:49:16 +0300