| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When multiple ODR switch happens during FIFO off, the change could
not be taken into account if you get back to previous FIFO on value.
For example, if you run sensor buffer at 50Hz, stop, change to
200Hz, then back to 50Hz and restart buffer, data will be timestamped
at 200Hz. This due to testing against mult and not new_mult.
To prevent this, let's just run apply_odr automatically when FIFO is
off. It will also simplify driver code.
Update inv_mpu6050 and inv_icm42600 to delete now useless apply_odr.
Fixes: 95444b9eeb8c ("iio: invensense: fix odr switching to same value")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20241021-invn-inv-sensors-timestamp-fix-switch-fifo-off-v2-1-39ffd43edcc4@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When device is enumerated via ACPI the respective device node is of
ACPI device type. Use that to check for ACPI enumeration, rather than
calling for full match which is O(n) vs. O(1) for the regular check.
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Prepare the bmi270 driver to support similar devices like the bmi260.
Signed-off-by: Justin Weiss <justin@justinweiss.com>
Link: https://patch.msgid.link/20241020220011.212395-3-justin@justinweiss.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
These attributes are not currently wired up, and will always return
EINVAL.
Fixes: 3ea51548d6b2 ("iio: imu: Add i2c driver for bmi270 imu")
Signed-off-by: Justin Weiss <justin@justinweiss.com>
Link: https://patch.msgid.link/20241020220011.212395-2-justin@justinweiss.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
add the iio driver for bosch imu smi240. The smi240 is a combined
three axis angular rate and three axis acceleration sensor module
with a measurement range of +/-300°/s and up to 16g. A synchronous
acc and gyro sampling can be triggered by setting the capture bit
in spi read command.
Implemented features:
* raw data access for each axis through sysfs
* tiggered buffer for continuous sampling
* synchronous acc and gyro data from tiggered buffer
Signed-off-by: Shen Jianping <Jianping.Shen@de.bosch.com>
Link: https://patch.msgid.link/20241018135234.5446-3-Jianping.Shen@de.bosch.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
We need the iio fixes from 6.12-rc4 in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The header files linux/module.h is included twice in bmi270_i2c.c,
so one inclusion of each can be removed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11363
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://patch.msgid.link/20241016003919.113306-1-yang.lee@linux.alibaba.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for the 6.12 cycle.
Most of this pull request is the result of Javier Carrasco doing a
careful audit for missing Kconfig dependencies that luck has meant
the random builds have never hit. The rest is the usual mix of old
bugs that have surfaced and some fallout from the recent merge window.
adi,ad5686
- Fix binding duplication of compatible strings.
bosch,bma400
- Fix an uninitialized variable in the event tap handling.
bosch,bmi323
- Fix several issues in the register saving and restore on suspend/resume
sensiron,spd500
- Fix missing CRC8 dependency
ti,op3001
- Fix a missing full-scale range value (values above this point were
all reported wrongly)
vishay,veml6030
- Fix a segmentation fault due to some type confusion.
- Fix wrong ambient light sensor resolution.
* tag 'iio-fixes-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (34 commits)
iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig
iio: frequency: {admv4420,adrf6780}: format Kconfig entries
iio: adc: ad4695: Add missing Kconfig select
iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency()
iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config()
iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig
iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig
iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig
iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig
iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig
iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig
iio: resolver: ad2s1210 add missing select REGMAP in Kconfig
iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: magnetometer: af8133j: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: light: bu27008: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: chemical: ens160: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: dac: ad5766: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: dac: ad3552r: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
...
|
|
Linux 6.12-rc2
Resolved movement of asm/unaligned.h to linux/unaligned.h
|
|
BMI323_STEP_SC1_REG was defined twice.
Redundant definition has been removed
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Link: https://patch.msgid.link/20241009111828.43371-1-tarang.raval@siliconsignals.io
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Implement SPI driver for the Bosch BMI270 6-axis IMU. Provide raw read
write access to acceleration and angle velocity measurements via the SPI
interface on the device.
Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com>
Link: https://patch.msgid.link/20241002033628.681812-1-lanzano.alex@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
IAM-20680HT & HP are 2 variants of IAM-20680 with better specs,
wider temperature range, and a bigger FIFO (4k).
Fully compatible with IAM-20680, FIFO is 512 bytes by default and
with correct register setting we expand it to full 4k.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20240923-inv-mpu6050-add-iam20680-ht-hp-v2-2-48290e0b9931@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
The commit in question does not proove that ACPI ID exists.
Quite likely it was a cargo cult addition while doint that
for DT-based enumeration. Drop most likely fake ACPI ID.
Googling for KMX61021L gives no useful results in regard to DSDT.
Moreover, the official vendor ID in the registry for Kionix is KIOX.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20240911213110.2893562-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add initial i2c support for the Bosch BMI270 6-axis IMU.
Provides raw read access to acceleration and angle velocity measurements
via iio channels. Device configuration requires firmware provided by
Bosch and is requested and load from userspace.
Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com>
Link: https://patch.msgid.link/20240912210749.3080157-3-lanzano.alex@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use upper_16_bits()/lower_16_bits() helpers instead of open-coding them.
This is easier to scan quickly compared to bitwise manipulation, and
it is pleasingly symmetric.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20240904184543.1219866-1-andy.shevchenko@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Access to platform data via dev_get_platdata() getter to make code cleaner.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patch.msgid.link/20240902222824.1145571-15-andy.shevchenko@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use aligned_s64 for the timestamp field.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240903180218.3640501-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
There are drivers that do not need acpi.h, drop unused inclusion.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240903212922.3731221-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use irq_get_trigger_type() to replace getting the irq data then the
type in two steps.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20240901135950.797396-13-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use irq_get_trigger_type() to replace getting the irq data then the
type in two steps.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240901135950.797396-12-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use irq_get_trigger_type() to replace getting the irq data then the
type in two steps.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240901135950.797396-11-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use irq_get_trigger_type() to replace getting the irq data then the
type in two steps.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240901135950.797396-10-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use irq_get_trigger_type() to replace getting the irq data then the
type in two steps.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240901135950.797396-9-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add the id_table of inv_icm42600, so the device can probe correctly.
Signed-off-by: Jason Liu <jasonliu10041728@gmail.com>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20240902113101.3135-1-jasonliu10041728@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This reversed if statement means that the function just returns success
without writing to the registers.
Fixes: 16531118ba63 ("iio: bmi323: peripheral in lowest power state on suspend")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/689a2122-6e2f-4b0c-9a1c-39a98621c6c1@stanley.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This code is using bmi323_reg_savestate[] and ->reg_settings[] instead
of bmi323_ext_reg_savestate[] and ->ext_reg_settings[]. This was
discovered by Smatch:
drivers/iio/imu/bmi323/bmi323_core.c:2202 bmi323_core_runtime_suspend()
error: buffer overflow 'bmi323_reg_savestate' 9 <= 11
Fixes: 16531118ba63 ("iio: bmi323: peripheral in lowest power state on suspend")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/7175b8ec-85cf-4fbf-a4e1-c4c43c3b665c@stanley.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When building with clang and CONFIG_PM disabled (such as with s390), it
warns:
drivers/iio/imu/bmi323/bmi323_core.c:121:27: warning: variable 'bmi323_reg_savestate' is not needed and will not be emitted [-Wunneeded-internal-declaration]
121 | static const unsigned int bmi323_reg_savestate[] = {
| ^~~~~~~~~~~~~~~~~~~~
drivers/iio/imu/bmi323/bmi323_core.c:133:27: warning: variable 'bmi323_ext_reg_savestate' is not needed and will not be emitted [-Wunneeded-internal-declaration]
133 | static const unsigned int bmi323_ext_reg_savestate[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~
These arrays have no references outside of sizeof(), which will be
evaluated at compile time. To avoid these warnings, remove the CONFIG_PM
ifdef guard and use the RUNTIME_PM_OPS macro to ensure these functions
always appear used to the compiler, which allows the references to the
arrays to be visible as well. This results in no difference in runtime
behavior because bmi323_core_pm_ops is only used when CONFIG_PM is set
with the pm_ptr() macro.
Fixes: b09999ee1e86 ("iio: bmi323: suspend and resume triggering on relevant pm operations")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20240910-iio-bmi323-remove-config_pm-guards-v1-1-0552249207af@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
We need the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The device property APIs designed that way that they will return an error when
there is no valid fwnode provided. Moreover, the check for NULL of dev_fwnode()
is not fully correct as in some (currently rare) cases it may contain an error
pointer. This is not a problem anyway (see keyword 'valid' above) that's why
the code works properly even without this change.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patch.msgid.link/20240826212344.866928-3-andy.shevchenko@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Replace the duplicate ACPI "ROTM" data parsing code with the new
shared iio_read_acpi_mount_matrix() helper.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patch.msgid.link/20240826212344.866928-2-andy.shevchenko@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The bmi323 is mounted on some devices that are powered
by an internal battery: help in reducing system overall power drain
while the system is in s2idle or the imu driver is not loaded
by resetting it in its lowest power draining state.
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Link: https://patch.msgid.link/20240824141122.334620-2-benato.denis96@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Interrupt status read seems to be broken on some old MPU-6050 like
chips. Fix by reverting to previous driver behavior bypassing interrupt
status read. This is working because these chips are not supporting
WoM and data ready is the only interrupt source.
Fixes: 5537f653d9be ("iio: imu: inv_mpu6050: add new interrupt handler for WoM events")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # LG P880
Link: https://patch.msgid.link/20240814143735.327302-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use IS_ENABLED(CONFIG_DEBUG_FS) to return in case debugfs is not present.
Since this is known at compile time, it allows the compiler to drop any
unused code. Therefore no need to wrap the code with #ifdef.
While at it make adis16460_debugfs_init() void as the return code is
ignored.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240809-dev-adis-debugfs-improv-v1-4-d3adb6996518@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use IS_ENABLED(CONFIG_DEBUG_FS) to return in case debugfs is not present.
Since this is known at compile time, it allows the compiler to drop any
unused code. Therefore no need to wrap the code with #ifdef.
While at it make adis16400_debugfs_init() void as the return code is
ignored.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240809-dev-adis-debugfs-improv-v1-3-d3adb6996518@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use IS_ENABLED(CONFIG_DEBUG_FS) to return in case debugfs is not present.
Since this is known at compile time, it allows the compiler to drop any
unused code. Therefore no need to wrap the code with #ifdef.
While at it make adis16480_debugfs_init() void as the return code is
ignored.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240809-dev-adis-debugfs-improv-v1-2-d3adb6996518@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use IS_ENABLED(CONFIG_DEBUG_FS) to return early in case debugfs is not
present. Since this is known at compile time, it allows the compiler to
drop any unused code. Therefore no need to wrap the code with #ifdef.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240809-dev-adis-debugfs-improv-v1-1-d3adb6996518@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Prevent triggers from stop working after the device has entered sleep:
use iio_device_suspend_triggering and iio_device_resume_triggering helpers.
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Link: https://patch.msgid.link/20240807185619.7261-3-benato.denis96@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-11-8e12cd042906@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use iio_get_masklength() to access '.masklength' so it can be annotated
as __private when there are no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-10-8e12cd042906@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-9-8e12cd042906@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
`bno055_ser_regmap_bus` is not modified and can be declared as const to
move its data to a read-only section.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240703-iio-cont-regmap_bus-v1-8-34754f355b65@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
`bmi323_regmap_bus` is not modified and can be declared as const to
move its data to a read-only section.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240703-iio-cont-regmap_bus-v1-7-34754f355b65@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com>
Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-20-98193bf536a6@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com>
Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-19-98193bf536a6@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use the new auto cleanup based locks so error paths are simpler.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240618-dev-iio-adis-cleanup-v1-8-bd93ce7845c7@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use the new auto cleanup based locks so error paths are simpler.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240618-dev-iio-adis-cleanup-v1-7-bd93ce7845c7@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use the new auto cleanup based locks so error paths are simpler.
While at it, removed 'ret' from adis16400_write_raw() by doing
return adis_write_reg_16();
instead of
ret = adis_write_reg_16();
return ret;
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240618-dev-iio-adis-cleanup-v1-6-bd93ce7845c7@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This makes locking and handling error paths simpler.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240618-dev-iio-adis-cleanup-v1-2-bd93ce7845c7@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Split trigger handling for devices that have paging and need to
select the correct page to get the data. Although this actually
introduces more LOC, it makes the code and the locking clear. It will
also make the following move to the cleanup magic cleaner.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240618-dev-iio-adis-cleanup-v1-1-bd93ce7845c7@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
