summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2024-03-05i2c: designware: Delete SMBus functionalitiesHal Feng1-6/+4
The driver didn't implement the smbus interface, so replace the SMBus functionalities with I2C_FUNC_SMBUS_EMUL. Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
2024-03-01i2c: imx: when being a target, mark the last read as processedCorey Minyard1-0/+5
[ Upstream commit 87aec499368d488c20292952d6d4be7cb9e49c5e ] When being a target, NAK from the controller means that all bytes have been transferred. So, the last byte needs also to be marked as 'processed'. Otherwise index registers of backends may not increase. Fixes: f7414cd6923f ("i2c: imx: support slave mode for imx I2C driver") Signed-off-by: Corey Minyard <minyard@acm.org> Tested-by: Andrew Manley <andrew.manley@sealingtech.com> Reviewed-by: Andrew Manley <andrew.manley@sealingtech.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> [wsa: fixed comment and commit message to properly describe the case] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23i2c: i801: Fix block process call transactionsJean Delvare1-2/+2
[ Upstream commit c1c9d0f6f7f1dbf29db996bd8e166242843a5f21 ] According to the Intel datasheets, software must reset the block buffer index twice for block process call transactions: once before writing the outgoing data to the buffer, and once again before reading the incoming data from the buffer. The driver is currently missing the second reset, causing the wrong portion of the block buffer to be read. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reported-by: Piotr Zakowski <piotr.zakowski@intel.com> Closes: https://lore.kernel.org/linux-i2c/20240213120553.7b0ab120@endymion.delvare/ Fixes: 315cd67c9453 ("i2c: i801: Add Block Write-Block Read Process Call support") Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23i2c: pasemi: split driver into two separate modulesArnd Bergmann2-4/+8
[ Upstream commit f44bff19268517ee98e80e944cad0f04f1db72e3 ] On powerpc, it is possible to compile test both the new apple (arm) and old pasemi (powerpc) drivers for the i2c hardware at the same time, which leads to a warning about linking the same object file twice: scripts/Makefile.build:244: drivers/i2c/busses/Makefile: i2c-pasemi-core.o is added to multiple modules: i2c-apple i2c-pasemi Rework the driver to have an explicit helper module, letting Kbuild take care of whether this should be built-in or a loadable driver. Fixes: 9bc5f4f660ff ("i2c: pasemi: Split pci driver to its own file") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23i2c: qcom-geni: Correct I2C TRE sequenceViken Dadhaniya1-7/+7
[ Upstream commit 83ef106fa732aea8558253641cd98e8a895604d7 ] For i2c read operation in GSI mode, we are getting timeout due to malformed TRE basically incorrect TRE sequence in gpi(drivers/dma/qcom/gpi.c) driver. I2C driver has geni_i2c_gpi(I2C_WRITE) function which generates GO TRE and geni_i2c_gpi(I2C_READ)generates DMA TRE. Hence to generate GO TRE before DMA TRE, we should move geni_i2c_gpi(I2C_WRITE) before geni_i2c_gpi(I2C_READ) inside the I2C GSI mode transfer function i.e. geni_i2c_gpi_xfer(). TRE stands for Transfer Ring Element - which is basically an element with size of 4 words. It contains all information like slave address, clk divider, dma address value data size etc). Mainly we have 3 TREs(Config, GO and DMA tre). - CONFIG TRE : consists of internal register configuration which is required before start of the transfer. - DMA TRE : contains DDR/Memory address, called as DMA descriptor. - GO TRE : contains Transfer directions, slave ID, Delay flags, Length of the transfer. I2c driver calls GPI driver API to config each TRE depending on the protocol. For read operation tre sequence will be as below which is not aligned to hardware programming guide. - CONFIG tre - DMA tre - GO tre As per Qualcomm's internal Hardware Programming Guide, we should configure TREs in below sequence for any RX only transfer. - CONFIG tre - GO tre - DMA tre Fixes: d8703554f4de ("i2c: qcom-geni: Add support for GPI DMA") Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # qrb5165-rb5 Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05i2c: rk3x: Adjust mask/value offset for i2c2 on rv1126Tim Lunn1-2/+6
[ Upstream commit 92a85b7c6262f19c65a1c115cf15f411ba65a57c ] Rockchip RV1126 is using old style i2c controller, the i2c2 bus uses a non-sequential offset in the grf register for the mask/value bits for this bus. This patch fixes i2c2 bus on rv1126 SoCs. Signed-off-by: Tim Lunn <tim@feathertop.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26i2c: s3c24xx: fix transferring more than one message in polling modeMarek Szyprowski1-17/+10
[ Upstream commit 990489e1042c6c5d6bccf56deca68f8dbeed8180 ] To properly handle ACK on the bus when transferring more than one message in polling mode, move the polling handling loop from s3c24xx_i2c_message_start() to s3c24xx_i2c_doxfer(). This way i2c_s3c_irq_nextbyte() is always executed till the end, properly acknowledging the IRQ bits and no recursive calls to i2c_s3c_irq_nextbyte() are made. While touching this, also fix finishing transfers in polling mode by using common code path and always waiting for the bus to become idle and disabled. Fixes: 117053f77a5a ("i2c: s3c2410: Add polling mode support") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26i2c: s3c24xx: fix read transfers in polling modeMarek Szyprowski1-2/+11
[ Upstream commit 0d9cf23ed55d7ba3ab26d617a3ae507863674c8f ] To properly handle read transfers in polling mode, no waiting for the ACK state is needed as it will never come. Just wait a bit to ensure start state is on the bus and continue processing next bytes. Fixes: 117053f77a5a ("i2c: s3c2410: Add polling mode support") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-20i2c: rk3x: fix potential spinlock recursion on pollJensen Huang1-2/+11
[ Upstream commit 19cde9c92b8d3b7ee555d0da3bcb0232d3a784f4 ] Possible deadlock scenario (on reboot): rk3x_i2c_xfer_common(polling) -> rk3x_i2c_wait_xfer_poll() -> rk3x_i2c_irq(0, i2c); --> spin_lock(&i2c->lock); ... <rk3x i2c interrupt> -> rk3x_i2c_irq(0, i2c); --> spin_lock(&i2c->lock); (deadlock here) Store the IRQ number and disable/enable it around the polling transfer. This patch has been tested on NanoPC-T4. Signed-off-by: Jensen Huang <jensenhuang@friendlyarm.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-10i2c: core: Fix atomic xfer check for non-preempt configBenjamin Bara1-1/+3
commit a3368e1186e3ce8e38f78cbca019622095b1f331 upstream. Since commit aa49c90894d0 ("i2c: core: Run atomic i2c xfer when !preemptible"), the whole reboot/power off sequence on non-preempt kernels is using atomic i2c xfer, as !preemptible() always results to 1. During device_shutdown(), the i2c might be used a lot and not all busses have implemented an atomic xfer handler. This results in a lot of avoidable noise, like: [ 12.687169] No atomic I2C transfer handler for 'i2c-0' [ 12.692313] WARNING: CPU: 6 PID: 275 at drivers/i2c/i2c-core.h:40 i2c_smbus_xfer+0x100/0x118 ... Fix this by allowing non-atomic xfer when the interrupts are enabled, as it was before. Link: https://lore.kernel.org/r/20231222230106.73f030a5@yea Link: https://lore.kernel.org/r/20240102150350.3180741-1-mwalle@kernel.org Link: https://lore.kernel.org/linux-i2c/13271b9b-4132-46ef-abf8-2c311967bb46@mailbox.org/ Fixes: aa49c90894d0 ("i2c: core: Run atomic i2c xfer when !preemptible") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com> Tested-by: Michael Walle <mwalle@kernel.org> Tested-by: Tor Vic <torvic9@mailbox.org> [wsa: removed a comment which needs more work, code is ok] Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-01i2c: aspeed: Handle the coalesced stop conditions with the start conditions.Quan Nguyen1-16/+32
[ Upstream commit b4cc1cbba5195a4dd497cf2f8f09e7807977d543 ] Some masters may drive the transfers with low enough latency between the nak/stop phase of the current command and the start/address phase of the following command that the interrupts are coalesced by the time we process them. Handle the stop conditions before processing SLAVE_MATCH to fix the complaints that sometimes occur below. "aspeed-i2c-bus 1e78a040.i2c-bus: irq handled != irq. Expected 0x00000086, but was 0x00000084" Fixes: f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed I2C driver") Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-01i2c: qcom-geni: fix missing clk_disable_unprepare() and geni_se_resources_off()Yang Yingliang1-1/+7
[ Upstream commit 043465b66506e8c647cdd38a2db1f2ee0f369a1b ] Add missing clk_disable_unprepare() and geni_se_resources_off() in the error path in geni_i2c_probe(). Fixes: 14d02fbadb5d ("i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13i2c: ocores: Move system PM hooks to the NOIRQ phaseSamuel Holland1-2/+2
[ Upstream commit 382561d16854a747e6df71034da08d20d6013dfe ] When an I2C device contains a wake IRQ subordinate to a regmap-irq chip, the regmap-irq code must be able to perform I2C transactions during suspend_device_irqs() and resume_device_irqs(). Therefore, the bus must be suspended/resumed during the NOIRQ phase. Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13i2c: designware: Fix corrupted memory seen in the ISRJan Bottorff1-8/+8
[ Upstream commit f726eaa787e9f9bc858c902d18a09af6bcbfcdaf ] When running on a many core ARM64 server, errors were happening in the ISR that looked like corrupted memory. These corruptions would fix themselves if small delays were inserted in the ISR. Errors reported by the driver included "i2c_designware APMC0D0F:00: i2c_dw_xfer_msg: invalid target address" and "i2c_designware APMC0D0F:00:controller timed out" during in-band IPMI SSIF stress tests. The problem was determined to be memory writes in the driver were not becoming visible to all cores when execution rapidly shifted between cores, like when a register write immediately triggers an ISR. Processors with weak memory ordering, like ARM64, make no guarantees about the order normal memory writes become globally visible, unless barrier instructions are used to control ordering. To solve this, regmap accessor functions configured by this driver were changed to use non-relaxed forms of the low-level register access functions, which include a barrier on platforms that require it. This assures memory writes before a controller register access are visible to all cores. The community concluded defaulting to correct operation outweighed defaulting to the small performance gains from using relaxed access functions. Being a low speed device added weight to this choice of default register access behavior. Signed-off-by: Jan Bottorff <janb@os.amperecomputing.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28i2c: i801: fix potential race in i801_block_transaction_byte_by_byteHeiner Kallweit1-10/+9
commit f78ca48a8ba9cdec96e8839351e49eec3233b177 upstream. Currently we set SMBHSTCNT_LAST_BYTE only after the host has started receiving the last byte. If we get e.g. preempted before setting SMBHSTCNT_LAST_BYTE, the host may be finished with receiving the byte before SMBHSTCNT_LAST_BYTE is set. Therefore change the code to set SMBHSTCNT_LAST_BYTE before writing SMBHSTSTS_BYTE_DONE for the byte before the last byte. Now the code is also consistent with what we do in i801_isr_byte_done(). Reported-by: Jean Delvare <jdelvare@suse.com> Closes: https://lore.kernel.org/linux-i2c/20230828152747.09444625@endymion.delvare/ Cc: stable@vger.kernel.org Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28i2c: designware: Disable TX_EMPTY irq while waiting for block length byteTam Nguyen1-3/+16
commit e8183fa10c25c7b3c20670bf2b430ddcc1ee03c0 upstream. During SMBus block data read process, we have seen high interrupt rate because of TX_EMPTY irq status while waiting for block length byte (the first data byte after the address phase). The interrupt handler does not do anything because the internal state is kept as STATUS_WRITE_IN_PROGRESS. Hence, we should disable TX_EMPTY IRQ until I2C DesignWare receives first data byte from I2C device, then re-enable it to resume SMBus transaction. It takes 0.789 ms for host to receive data length from slave. Without the patch, i2c_dw_isr() is called 99 times by TX_EMPTY interrupt. And it is none after applying the patch. Cc: stable@vger.kernel.org Co-developed-by: Chuong Tran <chuong@os.amperecomputing.com> Signed-off-by: Chuong Tran <chuong@os.amperecomputing.com> Signed-off-by: Tam Nguyen <tamnguyenchi@os.amperecomputing.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28Revert "i2c: pxa: move to generic GPIO recovery"Robert Marko1-8/+68
commit 7b211c7671212cad0b83603c674838c7e824d845 upstream. This reverts commit 0b01392c18b9993a584f36ace1d61118772ad0ca. Conversion of PXA to generic I2C recovery, makes the I2C bus completely lock up if recovery pinctrl is present in the DT and I2C recovery is enabled. So, until the generic I2C recovery can also work with PXA lets revert to have working I2C and I2C recovery again. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: stable@vger.kernel.org # 5.11+ Acked-by: Andi Shyti <andi.shyti@kernel.org> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28i2c: core: Run atomic i2c xfer when !preemptibleBenjamin Bara1-1/+1
commit aa49c90894d06e18a1ee7c095edbd2f37c232d02 upstream. Since bae1d3a05a8b, i2c transfers are non-atomic if preemption is disabled. However, non-atomic i2c transfers require preemption (e.g. in wait_for_completion() while waiting for the DMA). panic() calls preempt_disable_notrace() before calling emergency_restart(). Therefore, if an i2c device is used for the restart, the xfer should be atomic. This avoids warnings like: [ 12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0 [ 12.676926] Voluntary context switch within RCU read-side critical section! ... [ 12.742376] schedule_timeout from wait_for_completion_timeout+0x90/0x114 [ 12.749179] wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70 ... [ 12.994527] atomic_notifier_call_chain from machine_restart+0x34/0x58 [ 13.001050] machine_restart from panic+0x2a8/0x32c Use !preemptible() instead, which is basically the same check as pre-v5.2. Fixes: bae1d3a05a8b ("i2c: core: remove use of in_atomic()") Cc: stable@vger.kernel.org # v5.2+ Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Acked-by: Wolfram Sang <wsa@kernel.org> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com> Link: https://lore.kernel.org/r/20230327-tegra-pmic-reboot-v7-2-18699d5dcd76@skidata.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28i2c: dev: copy userspace array safelyPhilipp Stanner1-2/+2
[ Upstream commit cc9c54232f04aef3a5d7f64a0ece7df00f1aaa3d ] i2c-dev.c utilizes memdup_user() to copy a userspace array. This is done without an overflow check. Use the new wrapper memdup_array_user() to copy the array more safely. Suggested-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28i2c: sun6i-p2wi: Prevent potential division by zeroAxel Lin1-0/+5
[ Upstream commit 5ac61d26b8baff5b2e5a9f3dc1ef63297e4b53e7 ] Make sure we don't OOPS in case clock-frequency is set to 0 in a DT. The variable set here is later used as a divisor. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28i2c: fix memleak in i2c_new_client_device()Wolfram Sang1-4/+9
[ Upstream commit 6af79f7fe748fe6a3c5c3a63d7f35981a82c2769 ] Yang Yingliang reported a memleak: === I got memory leak as follows when doing fault injection test: unreferenced object 0xffff888014aec078 (size 8): comm "xrun", pid 356, jiffies 4294910619 (age 16.332s) hex dump (first 8 bytes): 31 2d 30 30 31 63 00 00 1-001c.. backtrace: [<00000000eb56c0a9>] __kmalloc_track_caller+0x1a6/0x300 [<000000000b220ea3>] kvasprintf+0xad/0x140 [<00000000b83203e5>] kvasprintf_const+0x62/0x190 [<000000002a5eab37>] kobject_set_name_vargs+0x56/0x140 [<00000000300ac279>] dev_set_name+0xb0/0xe0 [<00000000b66ebd6f>] i2c_new_client_device+0x7e4/0x9a0 If device_register() returns error in i2c_new_client_device(), the name allocated by i2c_dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. === I think this solution is less intrusive and more robust than he originally proposed solutions, though. Reported-by: Yang Yingliang <yangyingliang@huawei.com> Closes: http://patchwork.ozlabs.org/project/linux-i2c/patch/20221124085448.3620240-1-yangyingliang@huawei.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28i2c: i801: Add support for Intel Birch Stream SoCJarkko Nikula2-0/+4
[ Upstream commit 8c56f9ef25a33e51f09a448d25cf863b61c9658d ] Add SMBus PCI ID on Intel Birch Stream SoC. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20i2c: iproc: handle invalid slave stateRoman Bacik1-58/+75
[ Upstream commit ba15a14399c262f91ce30c19fcbdc952262dd1be ] Add the code to handle an invalid state when both bits S_RX_EVENT (indicating a transaction) and S_START_BUSY (indicating the end of transaction - transition of START_BUSY from 1 to 0) are set in the interrupt status register during a slave read. Signed-off-by: Roman Bacik <roman.bacik@broadcom.com> Fixes: 1ca1b4516088 ("i2c: iproc: handle Master aborted error") Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-21i2c: stm32f7: Fix PEC handling in case of SMBUS transfersAlain Volmat1-3/+6
In case of SMBUS byte read with PEC enabled, the whole transfer is split into two commands. A first write command, followed by a read command. The write command does not have any PEC byte and a PEC byte is appended at the end of the read command. (cf Read byte protocol with PEC in SMBUS specification) Within the STM32 I2C controller, handling (either sending or receiving) of the PEC byte is done via the PECBYTE bit in register CR2. Currently, the PECBYTE is set at the beginning of a transfer, which lead to sending a PEC byte at the end of the write command (hence losing the real last byte), and also does not check the PEC byte received during the read command. This patch corrects the function stm32f7_i2c_smbus_xfer_msg in order to only set the PECBYTE during the read command. Fixes: 9e48155f6bfe ("i2c: i2c-stm32f7: Add initial SMBus protocols support") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-10-21i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()Herve Codina1-1/+1
i2c-mux-gpmux uses the pair of_find_i2c_adapter_by_node() / i2c_put_adapter(). These pair alone is not correct to properly lock the I2C parent adapter. Indeed, i2c_put_adapter() decrements the module refcount while of_find_i2c_adapter_by_node() does not increment it. This leads to an underflow of the parent module refcount. Use the dedicated function, of_get_i2c_adapter_by_node(), to handle correctly the module refcount. Fixes: ac8498f0ce53 ("i2c: i2c-mux-gpmux: new driver") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Cc: stable@vger.kernel.org Acked-by: Peter Rosin <peda@axentia.se> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-10-21i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()Herve Codina1-1/+1
i2c-demux-pinctrl uses the pair of_find_i2c_adapter_by_node() / i2c_put_adapter(). These pair alone is not correct to properly lock the I2C parent adapter. Indeed, i2c_put_adapter() decrements the module refcount while of_find_i2c_adapter_by_node() does not increment it. This leads to an underflow of the parent module refcount. Use the dedicated function, of_get_i2c_adapter_by_node(), to handle correctly the module refcount. Fixes: 50a5ba876908 ("i2c: mux: demux-pinctrl: add driver") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Cc: stable@vger.kernel.org Acked-by: Peter Rosin <peda@axentia.se> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-10-21i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()Herve Codina1-1/+1
i2c-mux-pinctrl uses the pair of_find_i2c_adapter_by_node() / i2c_put_adapter(). These pair alone is not correct to properly lock the I2C parent adapter. Indeed, i2c_put_adapter() decrements the module refcount while of_find_i2c_adapter_by_node() does not increment it. This leads to an underflow of the parent module refcount. Use the dedicated function, of_get_i2c_adapter_by_node(), to handle correctly the module refcount. Fixes: c4aee3e1b0de ("i2c: mux: pinctrl: remove platform_data") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Cc: stable@vger.kernel.org Acked-by: Peter Rosin <peda@axentia.se> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-10-10i2c: aspeed: Fix i2c bus hang in slave readJian Zhang1-1/+2
When the `CONFIG_I2C_SLAVE` option is enabled and the device operates as a slave, a situation arises where the master sends a START signal without the accompanying STOP signal. This action results in a persistent I2C bus timeout. The core issue stems from the fact that the i2c controller remains in a slave read state without a timeout mechanism. As a consequence, the bus perpetually experiences timeouts. In this case, the i2c bus will be reset, but the slave_state reset is missing. Fixes: fee465150b45 ("i2c: aspeed: Reset the i2c controller when timeout occurs") Signed-off-by: Jian Zhang <zhangjian.3032@bytedance.com> Acked-by: Andi Shyti <andi.shyti@kernel.org> Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-27i2c: npcm7xx: Fix callback completion orderingWilliam A. Kennington III1-10/+7
Sometimes, our completions race with new master transfers and override the bus->operation and bus->master_or_slave variables. This causes transactions to timeout and kernel crashes less frequently. To remedy this, we re-order all completions to the very end of the function. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: William A. Kennington III <william@wkennington.com> Reviewed-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-25i2c: mux: Avoid potential false error message in i2c_mux_add_adapterHeiner Kallweit1-1/+1
I2C_CLASS_DEPRECATED is a flag and not an actual class. There's nothing speaking against both, parent and child, having I2C_CLASS_DEPRECATED set. Therefore exclude it from the check. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-22i2c: xiic: Correct return value check for xiic_reinit()Daniel Scally1-1/+1
The error paths for xiic_reinit() return negative values on failure and 0 on success - this error message therefore is triggered on _success_ rather than failure. Correct the condition so it's only shown on failure as intended. Fixes: 8fa9c9388053 ("i2c: xiic: return value of xiic_reinit") Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Acked-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-21i2c: mux: gpio: Add missing fwnode_handle_put()Liang He1-1/+3
In i2c_mux_gpio_probe_fw(), we should add fwnode_handle_put() when break out of the iteration device_for_each_child_node() as it will automatically increase and decrease the refcounter. Fixes: 98b2b712bc85 ("i2c: i2c-mux-gpio: Enable this driver in ACPI land") Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-21i2c: mux: demux-pinctrl: check the return value of devm_kstrdup()Xiaoke Wang1-0/+4
devm_kstrdup() returns pointer to allocated string on success, NULL on failure. So it is better to check the return value of it. Fixes: e35478eac030 ("i2c: mux: demux-pinctrl: run properly with multiple instances") Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-19i2c: designware: fix __i2c_dw_disable() in case master is holding SCL lowYann Sionneau2-0/+20
The DesignWare IP can be synthesized with the IC_EMPTYFIFO_HOLD_MASTER_EN parameter. In this case, when the TX FIFO gets empty and the last command didn't have the STOP bit (IC_DATA_CMD[9]), the controller will hold SCL low until a new command is pushed into the TX FIFO or the transfer is aborted. When the controller is holding SCL low, it cannot be disabled. The transfer must first be aborted. Also, the bus recovery won't work because SCL is held low by the master. Check if the master is holding SCL low in __i2c_dw_disable() before trying to disable the controller. If SCL is held low, an abort is initiated. When the abort is done, then proceed with disabling the controller. This whole situation can happen for instance during SMBus read data block if the slave just responds with "byte count == 0". This puts the driver in an unrecoverable state, because the controller is holding SCL low and the current __i2c_dw_disable() procedure is not working. In this situation only a SoC reset can fix the i2c bus. Co-developed-by: Jonathan Borne <jborne@kalray.eu> Signed-off-by: Jonathan Borne <jborne@kalray.eu> Signed-off-by: Yann Sionneau <ysionneau@kalray.eu> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-19i2c: i801: unregister tco_pdev in i801_probe() error pathHeiner Kallweit1-0/+1
We have to unregister tco_pdev also if i2c_add_adapter() fails. Fixes: 9424693035a5 ("i2c: i801: Create iTCO device on newer Intel PCHs") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-13i2c: cadence: Fix the kernel-doc warningsShubhrajyoti Datta1-0/+1
This fixes the below warnings drivers/i2c/busses/i2c-cadence.c:221: warning: Function parameter or member 'rinfo' not described in 'cdns_i2c' Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308171510.bKHBcZQW-lkp@intel.com/ Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-13i2c: aspeed: Reset the i2c controller when timeout occursTommy Huang1-2/+5
Reset the i2c controller when an i2c transfer timeout occurs. The remaining interrupts and device should be reset to avoid unpredictable controller behavior. Fixes: 2e57b7cebb98 ("i2c: aspeed: Add multi-master use case support") Cc: <stable@vger.kernel.org> # v5.1+ Signed-off-by: Tommy Huang <tommy_huang@aspeedtech.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-13i2c: I2C_MLXCPLD on ARM64 should depend on ACPIGeert Uytterhoeven1-2/+2
The "i2c_mlxcpld" platform device is only instantiated on X86 systems (through drivers/platform/x86/mlx-platform.c), or on ARM64 systems with ACPI (through drivers/platform/mellanox/nvsw-sn2201.c). Hence further restrict the dependency on ARM64 to ACPI, to prevent asking the user about this driver when configuring an ARM64 kernel without ACPI support. While at it, document in the Kconfig help text that the driver supports ARM64/ACPI based systems, too. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Vadim Pasternak <vadimp@nvidia.com> Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-13i2c: Make I2C_ATR invisibleGeert Uytterhoeven1-1/+1
I2C Address Translator (ATR) support is not a stand-alone driver, but a library. All of its users select I2C_ATR. Hence there is no need for the user to enable this symbol manually, except when compile-testing. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-04Merge tag 'i2c-for-6.6-rc1' of ↵Linus Torvalds65-411/+328
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has mainly cleanups this time and a few driver improvements. Because a lot of developers were on holidays (including myself) it was a good timing to apply lots of cleanups which would normally cause merge conflicts with other floating patches. Extra thanks go to Andi Shyti who backed me up when I was on a four week hiatus. This is also the reason that some patches were commited later than ideal" * tag 'i2c-for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (67 commits) i2c: at91: Use dev_err_probe() instead of dev_err() I2C: ali15x3: Do PCI error checks on own line i2c: Make return value check more accurate and explicit for devm_pinctrl_get() i2c: designware: Add support for recovery when GPIO need pinctrl i2c: mlxcpld: Add support for extended transaction length i2c: mlxcpld: Allow driver to run on ARM64 architecture i2c: nforce2: Do PCI error check on own line i2c: sis5595: Do PCI error checks on own line i2c: qcom-cci: Fix error checking in cci_probe() i2c: muxes: pca954x: Add regulator support i2c: muxes: pca954x: Add MAX735x/MAX736x support dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants dt-bindings: i2c: pca954x: Correct interrupt support i2c: pnx: Use devm_platform_get_and_ioremap_resource() i2c: pxa: Use devm_platform_get_and_ioremap_resource() i2c: s3c2410: Use devm_platform_get_and_ioremap_resource() i2c: sh_mobile: Use devm_platform_get_and_ioremap_resource() i2c: st: Use devm_platform_get_and_ioremap_resource() i2c: qcom-geni: Convert to devm_platform_ioremap_resource() i2c: stm32f4: Use devm_platform_get_and_ioremap_resource() ...
2023-09-01Merge tag 'media/v6.6-1' of ↵Linus Torvalds3-0/+720
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9719, ds90ub913 - new Intel IVSC MEI drivers - some Mediatek platform drivers were moved to a common location - Intel atomisp2 driver is now working with the main ov2680 driver. Due to that, the atomisp2 ov2680 staging one was removed - the bttv driver was finally converted to videobuf2 framework. This was the last one upstream using videobuf version 1 core. We'll likely remove the old videobuf framework on 6.7 - lots of improvements at atomisp driver: it now works with normal I2C sensors. Several compile-mode dependecies to select between ISP2400 and ISP2401 are now solved in runtime - a new ipu-bridge logic was added to work with IVSC MEI drivers - venus driver gained better support for new VPU versions - the v4l core async framework has gained lots of improvements and cleanups - lots of other cleanups, improvements and driver fixes * tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (358 commits) media: ivsc: Add ACPI dependency media: bttv: convert to vb2 media: bttv: use audio defaults for winfast2000 media: bttv: refactor bttv_set_dma() media: bttv: move vbi_skip/vbi_count out of buffer media: bttv: remove crop info from bttv_buffer media: bttv: remove tvnorm field from bttv_buffer media: bttv: remove format field from bttv_buffer media: bttv: move do_crop flag out of bttv_fh media: bttv: copy vbi_fmt from bttv_fh media: bttv: copy vid fmt/width/height from fh media: bttv: radio use v4l2_fh instead of bttv_fh media: bttv: replace BUG with WARN_ON media: bttv: use video_drvdata to get bttv media: i2c: rdacm21: Fix uninitialized value media: coda: Remove duplicated include media: vivid: fix the racy dev->radio_tx_rds_owner media: i2c: ccs: Check rules is non-NULL media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate media: i2c: ds90ub953: Fix use of uninitialized variables ...
2023-08-30i2c: at91: Use dev_err_probe() instead of dev_err()Yann Sionneau1-4/+3
Change if (IS_ERR(x)) { dev_err(...); return PTR_ERR(x); } into return dev_err_probe() Also, return the correct error instead of hardcoding -ENODEV This change has also the advantage of handling the -EPROBE_DEFER situation. Signed-off-by: Yann Sionneau <yann@sionneau.net> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-08-30I2C: ali15x3: Do PCI error checks on own lineIlpo Järvinen1-5/+6
Instead of if conditions with line splits, use the usual error handling pattern with a separate variable to improve readability. No functional changes intended. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-08-26i2c: Make return value check more accurate and explicit for devm_pinctrl_get()Jinjie Ruan2-2/+10
If pinctrl is not available (thus devm_pinctrl_get() returns NULL) then recovery can't work, because we can't switch the I2C pins between the I2C controller and GPIO. So, it is quite correct to print "can't get pinctrl, bus recovery not supported" because the I2C bus can't be recovered without pinctrl. The PTR_ERR() is also fine - because if pinctrl is not present and returns NULL, we'll end up returning zero, which is exactly what we want. However, open code that with a more accurate message will be more explicit for NULL case when CONFIG_PINCTRL is not defined. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-08-25i2c: designware: Add support for recovery when GPIO need pinctrlYann Sionneau1-0/+12
Currently if the SoC needs pinctrl to switch the SCL and SDA from the I2C function to GPIO function, the recovery won't work. scl-gpio = <>; sda-gpio = <>; Are not enough for some SoCs to have a working recovery. Some need: scl-gpio = <>; sda-gpio = <>; pinctrl-names = "default", "recovery"; pinctrl-0 = <&i2c_pins_hw>; pinctrl-1 = <&i2c_pins_gpio>; The driver was not filling rinfo->pinctrl with the device node pinctrl data which is needed by generic recovery code. Signed-off-by: Yann Sionneau <ysionneau@kalray.eu> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-08-25i2c: mlxcpld: Add support for extended transaction lengthVadim Pasternak1-0/+10
Add support for extended length of read and write transactions. New FPGA logic allows to increase size of the read and write transactions length. This feature is verified through capability register 'CPBLTY_REG'. Two bits 5 and 6 of the register are used for length capability detection. Value '10' indicates support of extended transaction length - 128 bytes for read transactions and 132 for write transactions. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Michael Shych <michaelsh@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-08-25i2c: mlxcpld: Allow driver to run on ARM64 architectureVadim Pasternak1-1/+1
Extend driver dependency by ARM64 architecture. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Michael Shych <michaelsh@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-08-25i2c: nforce2: Do PCI error check on own lineIlpo Järvinen1-2/+2
Instead of a if condition with a line split, use the usual error handling pattern with a separate variable to improve readability. No functional changes intended. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-08-25i2c: sis5595: Do PCI error checks on own lineIlpo Järvinen1-10/+10
Instead of if conditions with line splits, use the usual error handling pattern with a separate variable to improve readability. No functional changes intended. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-08-25i2c: qcom-cci: Fix error checking in cci_probe()Harshit Mogalapalli1-1/+3
devm_clk_bulk_get_all() can return zero when no clocks are obtained. Passing zero to dev_err_probe() is a success which is incorrect. Fixes: 605efbf43813 ("i2c: qcom-cci: Use dev_err_probe in probe function") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-21 23:40:41 +0300