summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2022-04-21disable starfive gpio and use pinctrljianlong.huang1-3/+3
Signed-off-by: jianlong.huang <jianlong.huang@starfivetech.com>
2021-08-10clock tree: enable clock tree driver, add clock tree in audio driver, add ↵michael.yan1-27/+0
clock in i2c uart and gmac.
2021-04-12linux:add ov5640 sensor support base evbkeith.zhao3-0/+183
2021-04-02remove i2c gpio configureHuan.Feng3-61/+4
2021-03-09add the linux patch from 192.168.110.194 gitserverHuan.Feng3-4/+66
2021-02-24Improve Synopsys DesignWare I2C adapter driver for StarFive VIC7100Tom1-0/+27
2021-02-16Stable updateFedora Kernel Team1-4/+2
2020-12-05i2c: mlxbf: Fix the return check of devm_ioremap and ioremapWang Xiaojun1-6/+6
devm_ioremap and ioremap may return NULL which cannot be checked by IS_ERR. Signed-off-by: Wang Xiaojun <wangxiaojun11@huawei.com> Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-05i2c: mlxbf: select CONFIG_I2C_SLAVEArnd Bergmann1-0/+1
If this is not enabled, the interfaces used in this driver do not work: drivers/i2c/busses/i2c-mlxbf.c:1888:3: error: implicit declaration of function 'i2c_slave_event' [-Werror,-Wimplicit-function-declaration] i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value); ^ drivers/i2c/busses/i2c-mlxbf.c:1888:26: error: use of undeclared identifier 'I2C_SLAVE_WRITE_REQUESTED' i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value); ^ drivers/i2c/busses/i2c-mlxbf.c:1890:32: error: use of undeclared identifier 'I2C_SLAVE_WRITE_RECEIVED' ret = i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, ^ drivers/i2c/busses/i2c-mlxbf.c:1892:26: error: use of undeclared identifier 'I2C_SLAVE_STOP' i2c_slave_event(slave, I2C_SLAVE_STOP, &value); ^ Fixes: b5b5b32081cd ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02i2c: imx: Don't generate STOP condition if arbitration has been lostChristian Eggers1-2/+10
If arbitration is lost, the master automatically changes to slave mode. I2SR_IBB may or may not be reset by hardware. Raising a STOP condition by resetting I2CR_MSTA has no effect and will not clear I2SR_IBB. So calling i2c_imx_bus_busy() is not required and would busy-wait until timeout. Signed-off-by: Christian Eggers <ceggers@arri.de> Tested (not extensively) on Vybrid VF500 (Toradex VF50): Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: stable@vger.kernel.org # Requires trivial backporting, simple remove # the 3rd argument from the calls to # i2c_imx_bus_busy(). Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02i2c: imx: Check for I2SR_IAL after every byteChristian Eggers1-0/+10
Arbitration Lost (IAL) can happen after every single byte transfer. If arbitration is lost, the I2C hardware will autonomously switch from master mode to slave. If a transfer is not aborted in this state, consecutive transfers will not be executed by the hardware and will timeout. Signed-off-by: Christian Eggers <ceggers@arri.de> Tested (not extensively) on Vybrid VF500 (Toradex VF50): Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02i2c: imx: Fix reset of I2SR_IAL flagChristian Eggers1-6/+16
According to the "VFxxx Controller Reference Manual" (and the comment block starting at line 97), Vybrid requires writing a one for clearing an interrupt flag. Syncing the method for clearing I2SR_IIF in i2c_imx_isr(). Signed-off-by: Christian Eggers <ceggers@arri.de> Fixes: 4b775022f6fd ("i2c: imx: add struct to hold more configurable quirks") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02i2c: qcom: Fix IRQ error misassignementRobert Foss1-2/+2
During cci_isr() errors read from register fields belonging to i2c master1 are currently assigned to the status field belonging to i2c master0. This patch corrects this error, and always assigns master1 errors to the status field of master1. Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver") Reported-by: Loic Poulain <loic.poulain@linaro.org> Suggested-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02i2c: qup: Fix error return code in qup_i2c_bam_schedule_desc()Zhihao Cheng1-1/+2
Fix to return the error code from qup_i2c_change_state() instaed of 0 in qup_i2c_bam_schedule_desc(). Fixes: fbf9921f8b35d9b2 ("i2c: qup: Fix error handling") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-11-06i2c: designware: slave should do WRITE_REQUESTED before WRITE_RECEIVEDMichael Wu1-27/+18
Sometimes we would get the following flow when doing an i2cset: 0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4 I2C_SLAVE_WRITE_RECEIVED 0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x714 : INTR_STAT=0x204 I2C_SLAVE_WRITE_REQUESTED I2C_SLAVE_WRITE_RECEIVED Documentation/i2c/slave-interface.rst says that I2C_SLAVE_WRITE_REQUESTED, which is mandatory, should be sent while the data did not arrive yet. It means in a write-request I2C_SLAVE_WRITE_REQUESTED should be reported before any I2C_SLAVE_WRITE_RECEIVED. By the way, I2C_SLAVE_STOP didn't be reported in the above case because DW_IC_INTR_STAT was not 0x200. dev->status can be used to record the current state, especially Designware I2C controller has no interrupts to identify a write-request. This patch makes not only I2C_SLAVE_WRITE_REQUESTED been reported first when IC_INTR_RX_FULL is rising and dev->status isn't STATUS_WRITE_IN_PROGRESS but also I2C_SLAVE_STOP been reported when a STOP condition is received. Signed-off-by: Michael Wu <michael.wu@vatics.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-11-06i2c: designware: call i2c_dw_read_clear_intrbits_slave() onceMichael Wu1-6/+1
If some bits were cleared by i2c_dw_read_clear_intrbits_slave() in i2c_dw_isr_slave() and not handled immediately, those cleared bits would not be shown again by later i2c_dw_read_clear_intrbits_slave(). They therefore were forgotten to be handled. i2c_dw_read_clear_intrbits_slave() should be called once in an ISR and take its returned state for all later handlings. Signed-off-by: Michael Wu <michael.wu@vatics.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-11-06i2c: mlxbf: I2C_MLXBF should depend on MELLANOX_PLATFORMGeert Uytterhoeven1-1/+1
The Mellanox BlueField I2C controller is only present on Mellanox BlueField SoCs. Hence add a dependency on MELLANOX_PLATFORM, to prevent asking the user about this driver when configuring a kernel without Mellanox platform support. Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-11-06i2c: mlxbf: Update author and maintainer email infoKhalil Blaiech1-1/+1
Correct the email addresses of the author and the maintainer of the Mellanox BlueField I2C driver. Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-11-06i2c: mlxbf: Update reference clock frequencyKhalil Blaiech1-6/+4
The reference clock frequency remains the same across Bluefield products. Thus, update the frequency and rename the macro. Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-11-06i2c: mlxbf: Remove unecessary wrapper functionsKhalil Blaiech1-111/+72
Few wrapper functions are useless and can be inlined. So delete mlxbf_i2c_read() and mlxbf_i2c_write() and replace them with readl() and writel(), respectively. Also delete mlxbf_i2c_read_data() and mlxbf_i2c_write() and replace them with ioread32be() and iowrite32be(), respectively. Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-11-06i2c: mlxbf: Fix resrticted cast warning of sparseKhalil Blaiech1-2/+2
Address warnings "warning: cast to restricted __be32" reported by sparse. Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-11-06i2c: mlxbf: Add CONFIG_ACPI to guard ACPI function callKhalil Blaiech1-0/+9
The build fails with "implicit declaration of function 'acpi_device_uid'" error. Thus, protect ACPI function calls from being called when CONFIG_ACPI is disabled. Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-11-06i2c: sh_mobile: implement atomic transfersUlrich Hecht1-20/+66
Implements atomic transfers to fix reboot/shutdown on r8a7790 Lager and similar boards. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> [wsa: some whitespace fixing] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-11-04i2c: mediatek: move dma reset before i2c resetQii Wang1-4/+4
The i2c driver default do dma reset after i2c reset, but sometimes i2c reset will trigger dma tx2rx, then apdma write data to dram which has been i2c_put_dma_safe_msg_buf(kfree). Move dma reset before i2c reset in mtk_i2c_init_hw to fix it. Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-25i2c: core: Restore acpi_walk_dep_device_list() getting called after ↵Hans de Goede1-1/+10
registering the ACPI i2c devs Commit 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()")'s intention was to only move the acpi_install_address_space_handler() call to the point before where the ACPI declared i2c-children of the adapter where instantiated by i2c_acpi_register_devices(). But i2c_acpi_install_space_handler() had a call to acpi_walk_dep_device_list() hidden (that is I missed it) at the end of it, so as an unwanted side-effect now acpi_walk_dep_device_list() was also being called before i2c_acpi_register_devices(). Move the acpi_walk_dep_device_list() call to the end of i2c_acpi_register_devices(), so that it is once again called *after* the i2c_client-s hanging of the adapter have been created. This fixes the Microsoft Surface Go 2 hanging at boot. Fixes: 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209627 Reported-by: Rainer Finke <rainer@finke.cc> Reported-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Suggested-by: Maximilian Luz <luzmaximilian@gmail.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-21Merge branch 'i2c/for-5.10' of ↵Linus Torvalds27-900/+3766
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - if a host can be a client, too, the I2C core can now use it to emulate SMBus HostNotify support (STM32 and R-Car added this so far) - also for client mode, a testunit has been added. It can create rare situations on the bus, so host controllers can be tested - a binding has been added to mark the bus as "single-master". This allows for better timeout detections - new driver for Mellanox Bluefield - massive refactoring of the Tegra driver - EEPROMs recognized by the at24 driver can now have custom names - rest is driver updates * 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (80 commits) Documentation: i2c: add testunit docs to index i2c: tegra: Improve driver module description i2c: tegra: Clean up whitespaces, newlines and indentation i2c: tegra: Clean up and improve comments i2c: tegra: Clean up printk messages i2c: tegra: Clean up variable names i2c: tegra: Improve formatting of variables i2c: tegra: Check errors for both positive and negative values i2c: tegra: Factor out hardware initialization into separate function i2c: tegra: Factor out register polling into separate function i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg() i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg() i2c: tegra: Rename wait/poll functions i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg() i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear() i2c: tegra: Remove likely/unlikely from the code i2c: tegra: Remove outdated barrier() i2c: tegra: Clean up variable types i2c: tegra: Reorder location of functions in the code i2c: tegra: Clean up probe function ...
2020-10-10i2c: owl: Clear NACK and BUS error bitsCristian Ciocaltea1-0/+6
When the NACK and BUS error bits are set by the hardware, the driver is responsible for clearing them by writing "1" into the corresponding status registers. Hence perform the necessary operations in owl_i2c_interrupt(). Fixes: d211e62af466 ("i2c: Add Actions Semiconductor Owl family S900 I2C driver") Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-10Revert "i2c: imx: Fix reset of I2SR_IAL flag"Wolfram Sang1-15/+5
This reverts commit fa4d30556883f2eaab425b88ba9904865a4d00f3. An updated version was sent. So, revert this version and give the new version more time for testing. Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-08i2c: meson: fixup rate calculation with filter delayNicolas Belin1-11/+12
Apparently, 15 cycles of the peripheral clock are used by the controller for sampling and filtering. Because this was not known before, the rate calculation is slightly off. Clean up and fix the calculation taking this filtering delay into account. Fixes: 30021e3707a7 ("i2c: add support for Amlogic Meson I2C controller") Signed-off-by: Nicolas Belin <nbelin@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-08i2c: meson: keep peripheral clock enabledJerome Brunet1-7/+3
SCL rate appears to be different than what is expected. For example, We get 164kHz on i2c3 of the vim3 when 400kHz is expected. This is partially due to the peripheral clock being disabled when the clock is set. Let's keep the peripheral clock on after probe to fix the problem. This does not affect the SCL output which is still gated when i2c is idle. Fixes: 09af1c2fa490 ("i2c: meson: set clock divider in probe instead of setting it for each transfer") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-08i2c: meson: fix clock setting overwriteJerome Brunet1-1/+18
When the slave address is written in do_start(), SLAVE_ADDR is written completely. This may overwrite some setting related to the clock rate or signal filtering. Fix this by writing only the bits related to slave address. To avoid causing unexpected changed, explicitly disable filtering or high/low clock mode which may have been left over by the bootloader. Fixes: 30021e3707a7 ("i2c: add support for Amlogic Meson I2C controller") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-08i2c: imx: Fix reset of I2SR_IAL flagChristian Eggers1-5/+15
According to the "VFxxx Controller Reference Manual" (and the comment block starting at line 97), Vybrid requires writing a one for clearing an interrupt flag. Syncing the method for clearing I2SR_IIF in i2c_imx_isr(). Signed-off-by: Christian Eggers <ceggers@arri.de> Fixes: 4b775022f6fd ("i2c: imx: add struct to hold more configurable quirks") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Improve driver module descriptionDmitry Osipenko1-1/+1
Use proper spelling of "NVIDIA" and don't designate driver as Tegra2-only since newer SoC generations are supported as well. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Clean up whitespaces, newlines and indentationDmitry Osipenko1-27/+46
Some places in the code are missing newlines or have unnecessary whitespaces and newlines. This creates inconsistency of the code and hurts readability. This patch removes the unnecessary and adds necessary whitespaces / newlines, clears indentation of the code. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Clean up and improve commentsDmitry Osipenko1-41/+47
Make all comments to be consistent in regards to capitalization and punctuation, correct spelling and grammar errors, improve wording. Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Clean up printk messagesDmitry Osipenko1-23/+14
This patch unifies style of all messages in the driver by starting them with a lowercase letter and using consistent capitalization and wording for all messages. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Clean up variable namesDmitry Osipenko1-87/+90
Rename "ret" variables to "err" in order to make code a bit more expressive, emphasizing that the returned value is an error code. Same vice versa, where appropriate. Rename variable "reg" to "val" in order to better reflect the actual usage of the variable in the code and to make naming consistent with the rest of the code. Use briefer names for a few members of the tegra_i2c_dev structure in order to improve readability of the code. All dev/&pdev->dev are replaced with i2c_dev->dev in order to have uniform code style across the driver. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Improve formatting of variablesDmitry Osipenko1-51/+45
Reorder definition of variables in the code to have them sorted by length and grouped logically, also replace "unsigned long" with "u32". Do this in order to make code easier to read. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Check errors for both positive and negative valuesDmitry Osipenko1-3/+3
The driver's code is inconsistent in regards to the error values checking. The correct way should be to check both positive and negative values. This patch cleans up the error-checks in the code. Note that the pm_runtime_get_sync() could return positive value on success, hence only relevant parts of the code are changed by this patch. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Factor out hardware initialization into separate functionDmitry Osipenko1-13/+19
Factor out hardware initialization into a separate function from the probe function. The only place where runtime PM needs to be resumed during probe is the place of hardware initialization, hence it makes sense to factor out it in order to have a bit cleaner error handling in tegra_i2c_probe(). Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Factor out register polling into separate functionDmitry Osipenko1-32/+25
Factor out register polling into a separate function in order to remove boilerplate code and make code cleaner. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg()Dmitry Osipenko1-40/+55
The code related to packet header setting up is a bit messy and makes tegra_i2c_xfer_msg() more difficult to read than it could be. Let's factor the packet header setup from tegra_i2c_xfer_msg() into separate function in order to make code easier to read and follow. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg()Dmitry Osipenko1-16/+30
Factor out error recovery code from tegra_i2c_xfer_msg() in order to make this function easier to read and follow. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Rename wait/poll functionsDmitry Osipenko1-18/+14
Drop '_timeout' postfix from the wait/poll completion function names in order to make the names shorter, making code cleaner a tad. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg()Dmitry Osipenko1-9/+8
The "dma" variable of tegra_i2c_xfer_msg() function doesn't bring much in regards to readability and generation of the code. Besides readability, it's also not very nice that the is_curr_dma_xfer is initialized in tegra_i2c_xfer_msg() and then could be overridden by tegra_i2c_config_fifo_trig(). In a result, the "dma" variable creates slight confusion since it's not instantly obvious why it's set after tegra_i2c_config_fifo_trig(). Hence should be better to have the variable removed. This makes code more consistent. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear()Dmitry Osipenko1-5/+4
The tegra_i2c_wait_for_config_load() checks for 'has_config_load_reg' by itself, hence there is no need to duplicate the check. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Remove likely/unlikely from the codeDmitry Osipenko1-2/+2
The likely/unlikely annotations should be used only in a hot paths of performance-critical code. The I2C driver doesn't have such paths, and thus, there is no justification for usage of likely/unlikely annotations in the code. Hence remove them. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Remove outdated barrier()Dmitry Osipenko1-8/+5
The barrier() was intended to reduce possibility of racing with the interrupt handler, but driver's code evolved significantly and today's driver enables interrupt only when it waits for completion notification. Hence barrier() has no good use anymore, let's remove it. Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Clean up variable typesDmitry Osipenko1-19/+19
Don't use signed types for unsigned values and use consistent types for sibling variables. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-05i2c: tegra: Reorder location of functions in the codeDmitry Osipenko1-244/+242
Reorder location of functions in the code in order to have definition of functions closer to the place of the invocation. This change makes easier to navigate around the code and removes the need to have a prototype for tegra_i2c_init(). Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-15 12:06:12 +0300