summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses
AgeCommit message (Collapse)AuthorFilesLines
2021-01-22i2c: remove sirf bus driverArnd Bergmann3-486/+0
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Barry Song <baohua@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-22Revert "i2c: imx: Remove unused .id_table support"Fabio Estevam1-1/+19
Coldfire platforms are non-DT users of this driver, so keep the .id_table support. This reverts commit c610199cd392e6e2d41811ef83d85355c1b862b3. Fixes: c610199cd392 (i2c: imx: Remove unused .id_table support") Reported-by: Sascha Hauer <sha@pengutronix.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-20ARM: remove tango platformArnd Bergmann1-2/+2
The smp8758 (tango4) SoC was the last generation of set-top-box chips to come out of Sigma Designs, and support was added by Marc Gonzalez and Måns Rullgård between 2015 and 2017, before the company went out of business and the products were abandoned. The chip is used in some set-top-boxes such as the Popcorn Hour A-500, which could have seen some adoption by hobbyists. This has not happened in the past four years, and support for the more widely used MIPS based SoCs was never merged at all. Thanks to Marc and Måns for maintaining for the past years even after the death of the platform. Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: Mans Rullgard <mans@mansr.com> Link: https://lore.kernel.org/lkml/2d643ebc-09af-a809-eb3f-2aec8ecee501@free.fr/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-17i2c: octeon: check correct size of maximum RECV_LEN packetWolfram Sang1-1/+1
I2C_SMBUS_BLOCK_MAX defines already the maximum number as defined in the SMBus 2.0 specs. No reason to add one to it. Fixes: 886f6f8337dd ("i2c: octeon: Support I2C_M_RECV_LEN") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Robert Richter <rric@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-17i2c: tegra: Create i2c_writesl_vi() to use with VI I2C for filling TX FIFOSowjanya Komatineni1-1/+21
VI I2C controller has known hardware bug where immediate multiple writes to TX_FIFO register gets stuck. Recommended software work around is to read I2C register after each write to TX_FIFO register to flush out the data. This patch implements this work around for VI I2C controller. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-17i2c: bpmp-tegra: Ignore unknown I2C_M flagsMikko Perttunen1-1/+1
In order to not to start returning errors when new I2C_M flags are added, change behavior to just ignore all flags that we don't know about. This includes the I2C_M_DMA_SAFE flag that already exists but causes -EINVAL to be returned for valid transactions. Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-17i2c: Drop unused efm32 bus driverUwe Kleine-König3-477/+0
Support for this machine was just removed, so drop the now unused i2c bus driver, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-12i2c: tegra: Wait for config load atomically while in ISRMikko Perttunen1-1/+1
Upon a communication error, the interrupt handler can call tegra_i2c_disable_packet_mode. This causes a sleeping poll to happen unless the current transaction was marked atomic. Fix this by making the poll happen atomically if we are in an IRQ. This matches the behavior prior to the patch mentioned in the Fixes tag. Fixes: ede2299f7101 ("i2c: tegra: Support atomic transfers") Cc: stable@vger.kernel.org Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-06i2c: mlxcpld: Add support for I2C bus frequency settingVadim Pasternak1-1/+62
Add support for I2C bus frequency setting according to the specific system capability. This capability is obtained from CPLD frequency setting register, which could be provided through the platform data. If such register is provided, it specifies minimal I2C bus frequency to be used for the devices attached to the I2C bus. Supported freqeuncies are 100KHz, 400KHz, 1MHz, while 100KHz is the default. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: busses: Use DEFINE_SPINLOCK() for spinlockZheng Yongjun1-2/+1
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: use DIV_ROUND_UP macro to do calculationZheng Yongjun1-3/+3
Don't open-code DIV_ROUND_UP() kernel macro. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: fix platform_get_irq.cocci warningsTian Tao1-3/+1
Remove dev_err() messages after platform_get_irq*() failures. drivers/i2c/busses/i2c-hix5hd2.c:417:2-9: line 417 is redundant because platform_get_irq() already prints an error Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: gpio: fix MODULE_LICENCEWolfram Sang1-1/+1
Let MODULE_LICENCE match the SPDX header which is correctly based on the previous textual description. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: iproc: handle rx fifo full interruptRayagonda Kokatanur1-4/+17
Add code to handle IS_S_RX_FIFO_FULL_SHIFT interrupt to support master write request with >= 64 bytes. Iproc has a slave rx fifo size of 64 bytes. Rx fifo full interrupt (IS_S_RX_FIFO_FULL_SHIFT) will be generated when RX fifo becomes full. This can happen if master issues write request of more than 64 bytes. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: iproc: handle master read requestRayagonda Kokatanur1-45/+170
Handle single or multi byte master read request with or without repeated start. Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: iproc: fix typo in slave_isr functionRayagonda Kokatanur1-1/+1
Fix typo in bcm_iproc_i2c_slave_isr(). Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: iproc: update slave isr mask (ISR_MASK_SLAVE)Rayagonda Kokatanur1-1/+2
Update slave isr mask (ISR_MASK_SLAVE) to include remaining two slave interrupts. Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: iproc: handle only slave interrupts which are enabledRayagonda Kokatanur1-4/+9
Handle only slave interrupts which are enabled. The IS_OFFSET register contains the interrupt status bits which will be set regardless of the enabling of the corresponding interrupt condition. One must therefore look at both IS_OFFSET and IE_OFFSET to determine whether an interrupt condition is set and enabled. Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: iproc: handle Master aborted errorRayagonda Kokatanur1-3/+5
Handle Master aborted error by flushing tx and rx fifo and reinitializing the hw. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: rcar: protect against supurious interrupts on V3UWolfram Sang1-14/+43
V3U creates spurious interrupts which we need to handle. This costs time until BUS_PHASE_DATA can be activated which is problematic for Gen2 SoCs and earlier. Because of this we introduce two interrupt handlers here which will call a generic main irq function once the timing critical stuff is done. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: rcar: make sure irq is not threaded on Gen2 and earlierWolfram Sang1-1/+5
Ensure this irq runs as fast as possible. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: rcar: optimize cacheline to minimize HW race conditionWolfram Sang1-1/+1
'flags' and 'io' are needed first, so they should be at the beginning of the private struct. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: rcar: faster irq code to minimize HW race conditionWolfram Sang1-7/+4
To avoid the HW race condition on R-Car Gen2 and earlier, we need to write to ICMCR as soon as possible in the interrupt handler. We can improve this by writing a static value instead of masking out bits. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: qcom-geni: Store DMA mapping data in geni_i2c_dev structRoja Rani Yarubandi1-16/+43
Store DMA mapping data in geni_i2c_dev struct to enhance DMA mapping data scope. For example during shutdown callback to unmap DMA mapping, this stored DMA mapping data can be used to call geni_se_tx_dma_unprep and geni_se_rx_dma_unprep functions. Add two helper functions geni_i2c_rx_msg_cleanup and geni_i2c_tx_msg_cleanup to unwrap the things after rx/tx FIFO/DMA transfers, so that the same can be used in geni_i2c_stop_xfer() function during shutdown callback. Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Reviewed-by: Akash Asthana <akashast@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: i801: Refactor mux code since platform_device_unregister() is NULL awareAndy Shevchenko1-7/+3
platform_device_unregister() is NULL-aware and thus doesn't required a duplication check in i801_del_mux(). Besides that it's also error pointer aware, and we may drop unneeded assignment in i801_add_mux() followed by conversion to PTR_ERR_OR_ZERO() for the returned value. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: i801: Drop duplicate NULL check in i801_del_mux()Andy Shevchenko1-2/+1
Since gpiod_remove_lookup_table() is NULL-aware, no need to have this check in the caller. Drop duplicate NULL check. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: mlxcpld: Decrease polling time for performance improvementVadim Pasternak1-1/+1
Decrease polling time 'MLXCPLD_I2C_POLL_TIME' from 2000 usec to 400 usec. It greatly improves performance of I2C transactions. Reliability of setting polling time to 400 usec has been thoroughly validated across all the supported systems. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: mlxcpld: Update module licenseVadim Pasternak1-29/+3
Update license to SPDX-License. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: mediatek: Fix apdma and i2c hand-shake timeoutQii Wang1-5/+22
With the apdma remove hand-shake signal, it requirs special operation timing to reset i2c manually, otherwise the interrupt will not be triggered, i2c transmission will be timeout. Fixes: 8426fe70cfa4("i2c: mediatek: Add apdma sync in i2c driver") Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-04i2c: i801: Fix the i2c-mux gpiod_lookup_table not being properly terminatedHans de Goede1-1/+1
gpiod_add_lookup_table() expects the gpiod_lookup_table->table passed to it to be terminated with a zero-ed out entry. So we need to allocate one more entry then we will use. Fixes: d308dfbf62ef ("i2c: mux/i801: Switch to use descriptor passing") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-04i2c: sprd: use a specific timeout to avoid system hang up issueChunyan Zhang1-1/+7
If the i2c device SCL bus being pulled up due to some exception before message transfer done, the system cannot receive the completing interrupt signal any more, it would not exit waiting loop until MAX_SCHEDULE_TIMEOUT jiffies eclipse, that would make the system seemed hang up. To avoid that happen, this patch adds a specific timeout for message transfer. Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver") Signed-off-by: Linhua Xu <linhua.xu@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> [wsa: changed errno to ETIMEDOUT] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-16Merge tag 'pm-5.11-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These update cpufreq (core and drivers), cpuidle (polling state implementation and the PSCI driver), the OPP (operating performance points) framework, devfreq (core and drivers), the power capping RAPL (Running Average Power Limit) driver, the Energy Model support, the generic power domains (genpd) framework, the ACPI device power management, the core system-wide suspend code and power management utilities. Specifics: - Use local_clock() instead of jiffies in the cpufreq statistics to improve accuracy (Viresh Kumar). - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq drivers (Viresh Kumar). - Clean up the cpufreq core, the intel_pstate driver and the schedutil cpufreq governor (Rafael Wysocki). - Fix up error code paths in the sti-cpufreq and mediatek cpufreq drivers (Yangtao Li, Qinglang Miao). - Fix cpufreq_online() to return error codes instead of success (0) in all cases when it fails (Wang ShaoBo). - Add mt8167 support to the mediatek cpufreq driver and blacklist mt8516 in the cpufreq-dt-platdev driver (Fabien Parent). - Modify the tegra194 cpufreq driver to always return values from the frequency table as the current frequency and clean up that driver (Sumit Gupta, Jon Hunter). - Modify the arm_scmi cpufreq driver to allow it to discover the power scale present in the performance protocol and provide this information to the Energy Model (Lukasz Luba). - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali Rohár). - Clean up the CPPC cpufreq driver (Ionela Voinescu). - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd Bergmann). - Rework the poling interval selection for the polling state in cpuidle (Mel Gorman). - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver (Ulf Hansson). - Modify the OPP framework to support empty (node-less) OPP tables in DT for passing dependency information (Nicola Mazzucato). - Fix potential lockdep issue in the OPP core and clean up the OPP core (Viresh Kumar). - Modify dev_pm_opp_put_regulators() to accept a NULL argument and update its users accordingly (Viresh Kumar). - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke). - Add support for governor feature flags to devfreq, make devfreq sysfs file permissions depend on the governor and clean up the devfreq core (Chanwoo Choi). - Clean up the tegra20 devfreq driver and deprecate it to allow another driver based on EMC_STAT to be used instead of it (Dmitry Osipenko). - Add interconnect support to the tegra30 devfreq driver, allow it to take the interconnect and OPP information from DT and clean it up (Dmitry Osipenko). - Add interconnect support to the exynos-bus devfreq driver along with interconnect properties documentation (Sylwester Nawrocki). - Add suport for AMD Fam17h and Fam19h processors to the RAPL power capping driver (Victor Ding, Kim Phillips). - Fix handling of overly long constraint names in the powercap framework (Lukasz Luba). - Fix the wakeup configuration handling for bridges in the ACPI device power management core (Rafael Wysocki). - Add support for using an abstract scale for power units in the Energy Model (EM) and document it (Lukasz Luba). - Add em_cpu_energy() micro-optimization to the EM (Pavankumar Kondeti). - Modify the generic power domains (genpd) framwework to support suspend-to-idle (Ulf Hansson). - Fix creation of debugfs nodes in genpd (Thierry Strudel). - Clean up genpd (Lina Iyer). - Clean up the core system-wide suspend code and make it print driver flags for devices with debug enabled (Alex Shi, Patrice Chotard, Chen Yu). - Modify the ACPI system reboot code to make it prepare for system power off to avoid confusing the platform firmware (Kai-Heng Feng). - Update the pm-graph (multiple changes, mostly usability-related) and cpupower (online and offline CPU information support) PM utilities (Todd Brandt, Brahadambal Srinivasan)" * tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits) cpufreq: Fix cpufreq_online() return value on errors cpufreq: Fix up several kerneldoc comments cpufreq: stats: Use local_clock() instead of jiffies cpufreq: schedutil: Simplify sugov_update_next_freq() cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate() PM: domains: create debugfs nodes when adding power domains opp: of: Allow empty opp-table with opp-shared dt-bindings: opp: Allow empty OPP tables media: venus: dev_pm_opp_put_*() accepts NULL argument drm/panfrost: dev_pm_opp_put_*() accepts NULL argument drm/lima: dev_pm_opp_put_*() accepts NULL argument PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table opp: Don't create an OPP table from dev_pm_opp_get_opp_table() cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table opp: Reduce the size of critical section in _opp_kref_release() PM / EM: Micro optimization in em_cpu_energy cpufreq: arm_scmi: Discover the power scale in performance protocol ...
2020-12-15Merge branches 'pm-sleep', 'pm-acpi', 'pm-domains' and 'powercap'Rafael J. Wysocki1-2/+2
* pm-sleep: PM: sleep: Add dev_wakeup_path() helper PM / suspend: fix kernel-doc markup PM: sleep: Print driver flags for all devices during suspend/resume * pm-acpi: PM: ACPI: Refresh wakeup device power configuration every time PM: ACPI: PCI: Drop acpi_pm_set_bridge_wakeup() PM: ACPI: reboot: Use S5 for reboot * pm-domains: PM: domains: create debugfs nodes when adding power domains PM: domains: replace -ENOTSUPP with -EOPNOTSUPP * powercap: powercap: Adjust printing the constraint name with new line powercap: RAPL: Add AMD Fam19h RAPL support powercap: Add AMD Fam17h RAPL support powercap/intel_rapl_msr: Convert rapl_msr_priv into pointer x86/msr-index: sort AMD RAPL MSRs by address
2020-12-09i2c: designware: Make register offsets all of the same widthAndy Shevchenko1-3/+3
For the sake of consistency add leading 0 to first register offsets to make them all of the same width. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-09i2c: designware: Switch header to use BIT() and GENMASK()Andy Shevchenko1-46/+46
Currently header file uses partially BIT() and GENMASK() macros. Switch it to use those macros in all cases where it's applicable for the sake of consistency. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-09i2c: pxa: move to generic GPIO recoveryCodrin Ciubotariu1-68/+8
Starting with commit 75820314de26 ("i2c: core: add generic I2C GPIO recovery") GPIO bus recovery is supported by the I2C core, so we can remove the driver implementation and use that one instead. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-09i2c: sh_mobile: Mark adapter suspended during suspendGeert Uytterhoeven1-0/+28
When a driver tries to send an I2C message while the adapter is suspended, this typically fails with: i2c-sh_mobile e60b0000.i2c: Transfer request timed out Avoid accessing the adapter while it is suspended by marking it suspended during suspend. This allows the I2C core to catch this, and print a warning: WARNING: CPU: 1 PID: 13 at drivers/i2c/i2c-core.h:54 __i2c_transfer+0x4a4/0x4e4 i2c i2c-6: Transfer while suspended Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-09i2c: owl: Add compatible for the Actions Semi S500 I2C controllerCristian Ciocaltea1-0/+1
Add S500 variant to the list of devices supported by the Actions Semi Owl I2C driver. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-07i2c: imx: support slave mode for imx I2C driverBiwen Li2-24/+196
The patch supports slave mode for imx I2C driver Signed-off-by: Biwen Li <biwen.li@nxp.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-07Merge branch 'i2c/for-current' into i2c/for-5.11Wolfram Sang8-193/+223
2020-12-05i2c: mlxbf: Fix the return check of devm_ioremap and ioremapWang Xiaojun1-6/+6
devm_ioremap and ioremap may return NULL which cannot be checked by IS_ERR. Signed-off-by: Wang Xiaojun <wangxiaojun11@huawei.com> Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-05i2c: mlxbf: select CONFIG_I2C_SLAVEArnd Bergmann1-0/+1
If this is not enabled, the interfaces used in this driver do not work: drivers/i2c/busses/i2c-mlxbf.c:1888:3: error: implicit declaration of function 'i2c_slave_event' [-Werror,-Wimplicit-function-declaration] i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value); ^ drivers/i2c/busses/i2c-mlxbf.c:1888:26: error: use of undeclared identifier 'I2C_SLAVE_WRITE_REQUESTED' i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value); ^ drivers/i2c/busses/i2c-mlxbf.c:1890:32: error: use of undeclared identifier 'I2C_SLAVE_WRITE_RECEIVED' ret = i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, ^ drivers/i2c/busses/i2c-mlxbf.c:1892:26: error: use of undeclared identifier 'I2C_SLAVE_STOP' i2c_slave_event(slave, I2C_SLAVE_STOP, &value); ^ Fixes: b5b5b32081cd ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-03i2c: ismt: Adding support for I2C_SMBUS_BLOCK_PROC_CALLMario Alejandro Posso Escobar1-2/+17
Expand the driver to support I2C_SMBUS_BLOCK_PROC_CALL since HW supports it already. Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mario Alejandro Posso Escobar <mario.posso.escobar@intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-03i2c: ocores: Avoid false-positive error log message.Stefan Lässer1-1/+1
Since commit 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()"), platform_get_irq() will call dev_err() on an error. In case of i2c ocores this leads to a false-positive error being logged: [ 4.173989] 007: ocores-i2c ocores-i2c: IRQ index 0 not found i2c ocores already handles the case when the IRQ cannot be found and therefore there is no benefit in having this error message being logged. This commit switches to platform_get_irq_optional(), which does not log in case the IRQ cannot be found. Signed-off-by: Stefan Lässer <stefan.laesser@omicronenergy.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-03Revert "i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630"Bjorn Andersson1-8/+4
A combination of recent bug fixes by Doug Anderson and the proper definition of iommu streams means that this hack is no longer needed. Let's clean up the code by reverting '127068abe85b ("i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630")'. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Caleb Connolly <caleb@connolly.tech> Tested-by: Steev Klimaszewski <steev@kali.org> Reviewed-by: Akash Asthana <akashast@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02i2c: mxs: Remove unneeded platform_device_idFabio Estevam1-19/+3
The i2c-mxs driver only runs on DT-platform and there is no need to use the platform_device_id structure to pass the driver data. Get rid of it to make the code simpler. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02i2c: pca-platform: drop two members from driver data that are assigned to onlyUwe Kleine-König1-4/+0
io_base and io_size are assigned to only in .probe() and otherwise unused. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02i2c: imx: Remove unused .id_table supportFabio Estevam1-19/+1
Since 5.10-rc1 i.MX is a devicetree-only platform and the existing .id_table support in this driver was only useful for old non-devicetree platforms. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02i2c: nvidia-gpu: drop empty stub for runtime pmVaibhav Gupta1-9/+1
After the commit c5eb1190074c ("PCI / PM: Allow runtime PM without callback functions") we no more need empty stubs for runtime-pm to work. The driver has no device specific task(s) for .suspend() . The stub was placed just for runtime-pm, which can be dropped now. Reported-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02i2c: mv64xxx: Add bus error recoveryMark Tomlinson1-1/+28
This adds i2c bus recovery to the mv64xxx driver. Implement bus recovery to recover from SCL/SDA stuck low. This uses the generic recovery function, setting the clock/data lines as GPIO pins, and sending 9 clocks to try and recover the bus. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> [wsa: added some curly braces] Signed-off-by: Wolfram Sang <wsa@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 07:48:46 +0300