summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses
AgeCommit message (Collapse)AuthorFilesLines
2021-12-17i2c: rk3x: Handle a spurious start completion interrupt flagOndrej Jirman1-2/+2
[ Upstream commit 02fe0fbd8a21e183687925c3a266ae27dda9840f ] In a typical read transfer, start completion flag is being set after read finishes (notice ipd bit 4 being set): trasnfer poll=0 i2c start rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10 i2c read rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b i2c stop rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 33 This causes I2C transfer being aborted in polled mode from a stop completion handler: trasnfer poll=1 i2c start rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10 i2c read rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 0 rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b i2c stop rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 13 i2c stop rk3x-i2c fdd40000.i2c: unexpected irq in STOP: 0x10 Clearing the START flag after read fixes the issue without any obvious side effects. This issue was dicovered on RK3566 when adding support for powering off the RK817 PMIC. Signed-off-by: Ondrej Jirman <megous@megous.com> Reviewed-by: John Keeping <john@metanate.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-17i2c: virtio: fix completion handlingVincent Whitchurch1-20/+12
[ Upstream commit b503de239f62eca898cfb7e820d9a35499137d22 ] The driver currently assumes that the notify callback is only received when the device is done with all the queued buffers. However, this is not true, since the notify callback could be called without any of the queued buffers being completed (for example, with virtio-pci and shared interrupts) or with only some of the buffers being completed (since the driver makes them available to the device in multiple separate virtqueue_add_sgs() calls). This can lead to incorrect data on the I2C bus or memory corruption in the guest if the device operates on buffers which are have been freed by the driver. (The WARN_ON in the driver is also triggered.) BUG kmalloc-128 (Tainted: G W ): Poison overwritten First byte 0x0 instead of 0x6b Allocated in i2cdev_ioctl_rdwr+0x9d/0x1de age=243 cpu=0 pid=28 memdup_user+0x2e/0xbd i2cdev_ioctl_rdwr+0x9d/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 Freed in i2cdev_ioctl_rdwr+0x1bb/0x1de age=68 cpu=0 pid=28 kfree+0x1bd/0x1cc i2cdev_ioctl_rdwr+0x1bb/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 Fix this by calling virtio_get_buf() from the notify handler like other virtio drivers and by actually waiting for all the buffers to be completed. Fixes: 3cfc88380413d20f ("i2c: virtio: add a virtio i2c frontend driver") Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-14i2c: mpc: Use atomic read and fix break conditionChris Packham1-1/+1
commit a74c313aca266fab0d1d1a72becbb8b7b5286b6e upstream. Maxime points out that the polling code in mpc_i2c_isr should use the _atomic API because it is called in an irq context and that the behaviour of the MCF bit is that it is 1 when the byte transfer is complete. All of this means the original code was effectively a udelay(100). Fix this by using readb_poll_timeout_atomic() and removing the negation of the break condition. Fixes: 4a8ac5e45cda ("i2c: mpc: Poll for MCF") Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08i2c: cbus-gpio: set atomic transfer callbackAaro Koskinen1-2/+3
commit b12764695c3fcade145890b67f82f8b139174cc7 upstream. CBUS transfers have always been atomic, but after commit 63b96983a5dd ("i2c: core: introduce callbacks for atomic transfers") we started to see warnings during e.g. poweroff as the atomic callback is not explicitly set. Fix that. Fixes the following WARNING seen during Nokia N810 power down: [ 786.570617] reboot: Power down [ 786.573913] ------------[ cut here ]------------ [ 786.578826] WARNING: CPU: 0 PID: 672 at drivers/i2c/i2c-core.h:40 i2c_smbus_xfer+0x100/0x110 [ 786.587799] No atomic I2C transfer handler for 'i2c-2' Fixes: 63b96983a5dd ("i2c: core: introduce callbacks for atomic transfers") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08i2c: stm32f7: stop dma transfer in case of NACKAlain Volmat1-2/+7
commit 31b90a95ccbbb4b628578ac17e3b3cc8eeacfe31 upstream. In case of receiving a NACK, the dma transfer should be stopped to avoid feeding data into the FIFO. Also ensure to properly return the proper error code and avoid waiting for the end of the dma completion in case of error happening during the transmission. Fixes: 7ecc8cfde553 ("i2c: i2c-stm32f7: Add DMA support") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08i2c: stm32f7: recover the bus on access timeoutAlain Volmat1-0/+2
commit b933d1faf8fa30d16171bcff404e39c41b2a7c84 upstream. When getting an access timeout, ensure that the bus is in a proper state prior to returning the error. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08i2c: stm32f7: flush TX FIFO upon transfer errorsAlain Volmat1-1/+19
commit 0c21d02ca469574d2082379db52d1a27b99eed0c upstream. While handling an error during transfer (ex: NACK), it could happen that the driver has already written data into TXDR before the transfer get stopped. This commit add TXDR Flush after end of transfer in case of error to avoid sending a wrong data on any other slave upon next transfer. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01i2c: virtio: disable timeout handlingVincent Whitchurch1-9/+5
[ Upstream commit 84e1d0bf1d7121759622dabf8fbef4c99ad597c5 ] If a timeout is hit, it can result is incorrect data on the I2C bus and/or memory corruptions in the guest since the device can still be operating on the buffers it was given while the guest has freed them. Here is, for example, the start of a slub_debug splat which was triggered on the next transfer after one transfer was forced to timeout by setting a breakpoint in the backend (rust-vmm/vhost-device): BUG kmalloc-1k (Not tainted): Poison overwritten First byte 0x1 instead of 0x6b Allocated in virtio_i2c_xfer+0x65/0x35c age=350 cpu=0 pid=29 __kmalloc+0xc2/0x1c9 virtio_i2c_xfer+0x65/0x35c __i2c_transfer+0x429/0x57d i2c_transfer+0x115/0x134 i2cdev_ioctl_rdwr+0x16a/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 Freed in virtio_i2c_xfer+0x32e/0x35c age=244 cpu=0 pid=29 kfree+0x1bd/0x1cc virtio_i2c_xfer+0x32e/0x35c __i2c_transfer+0x429/0x57d i2c_transfer+0x115/0x134 i2cdev_ioctl_rdwr+0x16a/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 There is no simple fix for this (the driver would have to always create bounce buffers and hold on to them until the device eventually returns the buffers), so just disable the timeout support for now. Fixes: 3cfc88380413d20f ("i2c: virtio: add a virtio i2c frontend driver") Acked-by: Jie Deng <jie.deng@intel.com> Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18i2c: xlr: Fix a resource leak in the error handling path of 'xlr_i2c_probe()'Christophe JAILLET1-1/+5
[ Upstream commit 7f98960c046ee1136e7096aee168eda03aef8a5d ] A successful 'clk_prepare()' call should be balanced by a corresponding 'clk_unprepare()' call in the error handling path of the probe, as already done in the remove function. More specifically, 'clk_prepare_enable()' is used, but 'clk_disable()' is also already called. So just the unprepare step has still to be done. Update the error handling path accordingly. Fixes: 75d31c2372e4 ("i2c: xlr: add support for Sigma Designs controller variant") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18i2c: mediatek: fixing the incorrect register offsetKewei Xu1-1/+1
[ Upstream commit b8228aea5a19d5111a7bf44f7de6749d1f5d487a ] The reason for the modification here is that the previous offset information is incorrect, OFFSET_DEBUGSTAT = 0xE4 is the correct value. Fixes: 25708278f810 ("i2c: mediatek: Add i2c support for MediaTek MT8183") Signed-off-by: Kewei Xu <kewei.xu@mediatek.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18i2c: i801: Use PCI bus rescan mutex to protect P2SB accessHeiner Kallweit1-3/+2
[ Upstream commit 7d6b61c394a42b8385858bb9e306d48a0112823c ] As pointed out by Andy in [0] using a local mutex here isn't strictly wrong but not sufficient. We should hold the PCI rescan lock for P2SB operations. [0] https://www.spinics.net/lists/linux-i2c/msg52717.html Fixes: 1a987c69ce2c ("i2c: i801: make p2sb_spinlock a mutex") Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-04i2c: mlxcpld: Modify register setting for 400KHz frequencyVadim Pasternak1-1/+1
Change setting for 400KHz frequency support by more accurate value. Fixes: 66b0c2846ba8 ("i2c: mlxcpld: Add support for I2C bus frequency setting") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-10-04i2c: mlxcpld: Fix criteria for frequency settingVadim Pasternak1-1/+1
Value for getting frequency capability wrongly has been taken from register offset instead of register value. Fixes: 66b0c2846ba8 ("i2c: mlxcpld: Add support for I2C bus frequency setting") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-10-02i2c: mediatek: Add OFFSET_EXT_CONF setting backKewei Xu1-1/+10
In the commit be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support"), we miss setting OFFSET_EXT_CONF register if i2c->dev_comp->timing_adjust is false, now add it back. Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support") Signed-off-by: Kewei Xu <kewei.xu@mediatek.com> Reviewed-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-09-01Merge branch 'i2c/for-mergewindow' of ↵Linus Torvalds24-718/+390
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has a smaller pull reuest this time: - new driver for I2C virtio - removal of PMC SMP driver because platform is already gone - IRQ probing and DMAENGINE API cleanups - add SI metric prefix definitions to units.h - beginning of i801 refactorization - a few driver improvements" * 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (28 commits) i2c: cadence: Implement save restore i2c: xlp9xx: fix main IRQ check i2c: mt65xx: fix IRQ check i2c: virtio: add a virtio i2c frontend driver i2c: hix5hd2: fix IRQ check i2c: s3c2410: fix IRQ check i2c: iop3xx: fix deferred probing i2c: synquacer: fix deferred probing i2c: sun6i-pw2i: Prefer strscpy over strlcpy i2c: remove dead PMC MSP TWI/SMBus/I2C driver i2c: dev: Use sysfs_emit() in "show" functions i2c: dev: Define pr_fmt() and drop duplication substrings i2c: designware: Fix indentation in the header i2c: designware: Use DIV_ROUND_CLOSEST() macro units: Add SI metric prefix definitions i2c: at91: mark PM ops as __maybe unused i2c: sh_mobile: : use proper DMAENGINE API for termination i2c: qup: : use proper DMAENGINE API for termination i2c: mxs: : use proper DMAENGINE API for termination i2c: imx: : use proper DMAENGINE API for termination ...
2021-08-26i2c: cadence: Implement save restoreShubhrajyoti Datta1-11/+27
The zynqmp platform now supports chip-off so the registers can lose context. Implement save restore for i2c module. Since we have only a couple of registers an unconditional restore is done. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-26i2c: xlp9xx: fix main IRQ checkSergey Shtylyov1-1/+1
Iff platform_get_irq() returns 0 for the main IRQ, the driver's probe() method will return 0 early (as if the method's call was successful). Let's consider IRQ0 valid for simplicity -- devm_request_irq() can always override that decision... Fixes: 2bbd681ba2b ("i2c: xlp9xx: Driver for Netlogic XLP9XX/5XX I2C controller") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: George Cherian <george.cherian@marvell.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-26i2c: mt65xx: fix IRQ checkSergey Shtylyov1-1/+1
Iff platform_get_irq() returns 0, the driver's probe() method will return 0 early (as if the method's call was successful). Let's consider IRQ0 valid for simplicity -- devm_request_irq() can always override that decision... Fixes: ce38815d39ea ("I2C: mediatek: Add driver for MediaTek I2C controller") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Reviewed-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-19i2c: virtio: add a virtio i2c frontend driverJie Deng3-0/+302
Add an I2C bus driver for virtio para-virtualization. The controller can be emulated by the backend driver in any device model software by following the virtio protocol. The device specification can be found on https://lists.oasis-open.org/archives/virtio-comment/202101/msg00008.html. By following the specification, people may implement different backend drivers to emulate different controllers according to their needs. Co-developed-by: Conghui Chen <conghui.chen@intel.com> Signed-off-by: Conghui Chen <conghui.chen@intel.com> Signed-off-by: Jie Deng <jie.deng@intel.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-19i2c: hix5hd2: fix IRQ checkSergey Shtylyov1-1/+1
Iff platform_get_irq() returns 0, the driver's probe() method will return 0 early (as if the method's call was successful). Let's consider IRQ0 valid for simplicity -- devm_request_irq() can always override that decision... Fixes: 15ef27756b23 ("i2c: hix5hd2: add i2c controller driver") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-19i2c: s3c2410: fix IRQ checkSergey Shtylyov1-1/+1
Iff platform_get_irq() returns 0, the driver's probe() method will return 0 early (as if the method's call was successful). Let's consider IRQ0 valid for simplicity -- devm_request_irq() can always override that decision... Fixes: e0d1ec97853f ("i2c-s3c2410: Change IRQ to be plain integer.") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-19i2c: iop3xx: fix deferred probingSergey Shtylyov1-4/+2
When adding the code to handle platform_get_irq*() errors in the commit 489447380a29 ("handle errors returned by platform_get_irq*()"), the actual error code was enforced to be -ENXIO in the driver for some strange reason. This didn't matter much until the deferred probing was introduced -- which requires an actual error code to be propagated upstream from the failure site. While fixing this, also stop overriding the errors from request_irq() to -EIO (done since the pre-git era). Fixes: 489447380a29 ("[PATCH] handle errors returned by platform_get_irq*()") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-17i2c: synquacer: fix deferred probingSergey Shtylyov1-1/+1
The driver overrides the error codes returned by platform_get_irq() to -ENODEV, so if it returns -EPROBE_DEFER, the driver will fail the probe permanently instead of the deferred probing. Switch to propagating the error codes upstream. Fixes: 0d676a6c4390 ("i2c: add support for Socionext SynQuacer I2C controller") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-17i2c: sun6i-pw2i: Prefer strscpy over strlcpyLen Baker1-1/+1
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated. The safe replacement is strscpy(). This is a previous step in the path to remove the strlcpy() function entirely from the kernel [1]. [1] https://github.com/KSPP/linux/issues/89 Signed-off-by: Len Baker <len.baker@gmx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-17i2c: remove dead PMC MSP TWI/SMBus/I2C driverLukas Bulwahn3-610/+0
Commit 1b00767fd8e1 ("MIPS: Remove PMC MSP71xx platform") removes the config PMC_MSP in ./arch/mips/Kconfig. Hence, since then, the corresponding PMC MSP TWI/SMBus/I2C driver is dead code. Remove this dead driver. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-11i2c: designware: Fix indentation in the headerAndy Shevchenko1-2/+2
In couple of places the indentation makes harder to read the code. Fix it to be sane. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-11i2c: designware: Use DIV_ROUND_CLOSEST() macroAndy Shevchenko2-6/+7
Instead of open-coding DIV_ROUND_CLOSEST() and similar use the macros directly. While at it, replace numbers with predefined SI metric prefixes. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-11i2c: at91: mark PM ops as __maybe unusedWolfram Sang1-1/+1
The driver uses pm_ptr(), so the PM ops could be unused. Reported-by: kernel test robot <lkp@intel.com> Fixes: dab4b0e8c9a5 ("i2c: at91: remove #define CONFIG_PM") Signed-off-by: Wolfram Sang <wsa@kernel.org> Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-11i2c: sh_mobile: : use proper DMAENGINE API for terminationWolfram Sang1-2/+2
dmaengine_terminate_all() is deprecated in favor of explicitly saying if it should be sync or async. Here, we want dmaengine_terminate_sync() because there is no other synchronization code in the driver to handle an async case. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-11i2c: qup: : use proper DMAENGINE API for terminationWolfram Sang1-1/+1
dmaengine_terminate_all() is deprecated in favor of explicitly saying if it should be sync or async. Here, we want dmaengine_terminate_sync() because there is no other synchronization code in the driver to handle an async case. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-11i2c: mxs: : use proper DMAENGINE API for terminationWolfram Sang1-2/+2
dmaengine_terminate_all() is deprecated in favor of explicitly saying if it should be sync or async. Here, we want dmaengine_terminate_sync() because there is no other synchronization code in the driver to handle an async case. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-11i2c: imx: : use proper DMAENGINE API for terminationWolfram Sang1-3/+3
dmaengine_terminate_all() is deprecated in favor of explicitly saying if it should be sync or async. Here, we want dmaengine_terminate_sync() because there is no other synchronization code in the driver to handle an async case. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-11i2c: at91-master: : use proper DMAENGINE API for terminationWolfram Sang1-2/+2
dmaengine_terminate_all() is deprecated in favor of explicitly saying if it should be sync or async. Here, we want dmaengine_terminate_sync() because there is no other synchronization code in the driver to handle an async case. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-11i2c: at91: remove #define CONFIG_PMClaudiu Beznea1-12/+5
Remove #define CONFIG_PM and use __maybe_unused for PM functions and pm_ptr() for PM ops. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-11i2c: parport: Switch to use module_parport_driver()Andy Shevchenko1-25/+11
Switch to use module_parport_driver() to reduce boilerplate code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-10i2c: iproc: fix race between client unreg and taskletDhananjay Phadke1-2/+2
Similar NULL deref was originally fixed by graceful teardown sequence - https://lore.kernel.org/linux-i2c/1597106560-79693-1-git-send-email-dphadke@linux.microsoft.com After this, a tasklet was added to take care of FIFO full condition for large i2c transaction. https://lore.kernel.org/linux-arm-kernel/20201102035433.6774-1-rayagonda.kokatanur@broadcom.com/ This introduced regression, a new race condition between tasklet enabling interrupts and client unreg teardown sequence. Kill tasklet before unreg_slave() masks bits in IE_OFFSET. Updated teardown sequence - (1) disable_irq() (2) Kill tasklet (3) Mask event enable bits in control reg (4) Erase slave address (avoid further writes to rx fifo) (5) Flush tx and rx FIFOs (6) Clear pending event (interrupt) bits in status reg (7) Set client pointer to NULL (8) enable_irq() -- Unable to handle kernel read from unreadable memory at virtual address 0000000000000320 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000009212a000 [0000000000000320] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] SMP CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O Hardware name: Overlake (DT) pstate: 40400085 (nZcv daIf +PAN -UAO -TCO BTYPE=--) pc : bcm_iproc_i2c_slave_isr+0x2b8/0x8e4 lr : bcm_iproc_i2c_slave_isr+0x1c8/0x8e4 sp : ffff800010003e70 x29: ffff800010003e80 x28: ffffda017acdc000 x27: ffffda017b0ae000 x26: ffff800010004000 x25: ffff800010000000 x24: ffffda017af4a168 x23: 0000000000000073 x22: 0000000000000000 x21: 0000000001400000 x20: 0000000001000000 x19: ffff06f09583f880 x18: 00000000fa83b2da x17: 000000000000b67e x16: 0000000002edb2f3 x15: 00000000000002c7 x14: 00000000000002c7 x13: 0000000000000006 x12: 0000000000000033 x11: 0000000000000000 x10: 0000000001000000 x9 : 0000000003289312 x8 : 0000000003289311 x7 : 02d0cd03a303adbc x6 : 02d18e7f0a4dfc6c x5 : 02edb2f33f76ea68 x4 : 00000000fa83b2da x3 : ffffda017af43cd0 x2 : ffff800010003e74 x1 : 0000000001400000 x0 : 0000000000000000 Call trace: bcm_iproc_i2c_slave_isr+0x2b8/0x8e4 bcm_iproc_i2c_isr+0x178/0x290 __handle_irq_event_percpu+0xd0/0x200 handle_irq_event+0x60/0x1a0 handle_fasteoi_irq+0x130/0x220 __handle_domain_irq+0x8c/0xcc gic_handle_irq+0xc0/0x120 el1_irq+0xcc/0x180 finish_task_switch+0x100/0x1d8 __schedule+0x61c/0x7a0 schedule_idle+0x28/0x44 do_idle+0x254/0x28c cpu_startup_entry+0x28/0x2c rest_init+0xc4/0xd0 arch_call_rest_init+0x14/0x1c start_kernel+0x33c/0x3b8 Code: f9423260 910013e2 11000509 b9047a69 (f9419009) ---[ end trace 4781455b2a7bec15 ]--- Fixes: 4d658451c9d6 ("i2c: iproc: handle rx fifo full interrupt") Signed-off-by: Dhananjay Phadke <dphadke@linux.microsoft.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Acked-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-10i2c: i801: Remove not needed debug messageHeiner Kallweit1-4/+0
If a user is interested in such details he can enable smbus tracing. Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-10i2c: i801: make p2sb_spinlock a mutexHeiner Kallweit1-4/+4
p2sb_spinlock is used in i801_add_tco_spt() only, and in process context only. Therefore a mutex is sufficient, and we can make the definition local to i801_add_tco_spt(). Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-10i2c: i801: Improve disabling runtime pmHeiner Kallweit1-6/+1
Setting the autosuspend delay to a negative value disables runtime pm in a little bit smarter way, because we need no cleanup when removing the driver. Note that this is safe when reloading the driver, because the call to pm_runtime_set_autosuspend_delay() in probe() will reverse the effect. See update_autosuspend() for details. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-03i2c: highlander: add IRQ checkSergey Shtylyov1-1/+1
The driver is written as if platform_get_irq() returns 0 on errors (while actually it returns a negative error code), blithely passing these error codes to request_irq() (which takes *unsigned* IRQ #) -- which fails with -EINVAL. Add the necessary error check to the pre-existing *if* statement forcing the driver into the polling mode... Fixes: 4ad48e6ab18c ("i2c: Renesas Highlander FPGA SMBus support") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-07-28i2c: i801: Fix handling SMBHSTCNT_PEC_ENHeiner Kallweit1-16/+11
Bit SMBHSTCNT_PEC_EN is used only if software calculates the CRC and uses register SMBPEC. This is not supported by the driver, it supports hw-calculation of CRC only (using bit SMBAUXSTS_CRCE). The chip spec states the following, therefore never set bit SMBHSTCNT_PEC_EN. Chapter SMBus CRC Generation and Checking If the AAC bit is set in the Auxiliary Control register, the PCH automatically calculates and drives CRC at the end of the transmitted packet for write cycles, and will check the CRC for read cycles. It will not transmit the contents of the PEC register for CRC. The PEC bit must not be set in the Host Control register. If this bit is set, unspecified behavior will result. This patch is based solely on the specification and compile-tested only, because I have no PEC-capable devices. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-07-20i2c: mpc: Poll for MCFChris Packham1-2/+2
During some transfers the bus can still be busy when an interrupt is received. Commit 763778cd7926 ("i2c: mpc: Restore reread of I2C status register") attempted to address this by re-reading MPC_I2C_SR once but that just made it less likely to happen without actually preventing it. Instead of a single re-read, poll with a timeout so that the bus is given enough time to settle but a genuine stuck SCL is still noticed. Fixes: 1538d82f4647 ("i2c: mpc: Interrupt driven transfer") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-07-04Merge branch 'i2c/for-mergewindow' of ↵Linus Torvalds14-129/+226
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - core supports now bus regulators controlling power for SCL/SDA - quite some DT binding conversions to YAML - added a seperate DT binding for the optional SMBus Alert feature - documentation with examples how to deal with I2C sysfs files - some bigger rework for the i801 driver - and a few usual driver updates * 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (42 commits) i2c: ali1535: mention that the device should not be disabled i2c: mpc: Restore reread of I2C status register i2c: core-smbus: Expose PEC calculate function for generic use Documentation: i2c: Add doc for I2C sysfs i2c: core: Disable client irq on reboot/shutdown dt-bindings: i2c: update bindings for MT8195 SoC i2c: imx: Fix some checkpatch warnings i2c: davinci: Simplify with dev_err_probe() i2c: cadence: Simplify with dev_err_probe() i2c: xiic: Simplify with dev_err_probe() i2c: cadence: Clear HOLD bit before xfer_size register rolls over dt-bindings: i2c: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575" i2c: i801: Improve i801_setup_hstcfg i2c: i801: Use driver name constant instead of function dev_driver_string i2c: i801: Simplify initialization of i2c_board_info in i801_probe_optional_slaves i2c: i801: Improve status polling i2c: cht-wc: Replace of_node by NULL i2c: riic: Add RZ/G2L support dt-bindings: i2c: renesas,riic: Document RZ/G2L I2C controller dt-bindings: i2c: renesas,iic: Convert to json-schema ...
2021-07-02i2c: ali1535: mention that the device should not be disabledWolfram Sang1-0/+5
The comment from the i801 driver is valid here, too, so copy it. Reported-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-07-02i2c: mpc: Restore reread of I2C status registerChris Packham1-0/+2
Prior to commit 1538d82f4647 ("i2c: mpc: Interrupt driven transfer") the old interrupt handler would reread MPC_I2C_SR after checking the CSR_MIF bit. When the driver was re-written this was removed as it seemed unnecessary. However as it turns out this is necessary for i2c devices which do clock stretching otherwise we end up thinking the bus is still busy when processing the interrupt. Fixes: 1538d82f4647 ("i2c: mpc: Interrupt driven transfer") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-06-24i2c: robotfuzz-osif: fix control-request directionsJohan Hovold1-2/+2
The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Control transfers without a data stage are treated as OUT requests by the USB stack and should be using usb_sndctrlpipe(). Failing to do so will now trigger a warning. Fix the OSIFI2C_SET_BIT_RATE and OSIFI2C_STOP requests which erroneously used the osif_usb_read() helper and set the IN direction bit. Reported-by: syzbot+9d7dadd15b8819d73f41@syzkaller.appspotmail.com Fixes: 83e53a8f120f ("i2c: Add bus driver for for OSIF USB i2c device.") Cc: stable@vger.kernel.org # 3.14 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-06-24i2c: imx: Fix some checkpatch warningsKwon Tae-young1-14/+5
Fix the following warnings reported by checkpatch:: drivers/i2c/busses/i2c-imx.c:173: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' drivers/i2c/busses/i2c-imx.c:175: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' drivers/i2c/busses/i2c-imx.c:176: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' drivers/i2c/busses/i2c-imx.c:177: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' drivers/i2c/busses/i2c-imx.c:455: WARNING: Unnecessary ftrace-like logging - prefer using ftrace drivers/i2c/busses/i2c-imx.c:602: WARNING: Unnecessary ftrace-like logging - prefer using ftrace drivers/i2c/busses/i2c-imx.c:638: WARNING: Unnecessary ftrace-like logging - prefer using ftrace drivers/i2c/busses/i2c-imx.c:1170: WARNING: Unnecessary ftrace-like logging - prefer using ftrace drivers/i2c/busses/i2c-imx.c:1374: WARNING: Unnecessary ftrace-like logging - prefer using ftrace drivers/i2c/busses/i2c-imx.c:1398: WARNING: Prefer strscpy over strlcpy - see: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-06-23i2c: davinci: Simplify with dev_err_probe()Krzysztof Kozlowski1-4/+1
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-06-23i2c: cadence: Simplify with dev_err_probe()Krzysztof Kozlowski1-5/+4
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-06-23i2c: xiic: Simplify with dev_err_probe()Krzysztof Kozlowski1-5/+4
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 10:18:03 +0300