summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2011-05-25Merge branch 'for-linus/2640/i2c' of git://git.fluff.org/bjdooks/linuxLinus Torvalds1-3/+7
* 'for-linus/2640/i2c' of git://git.fluff.org/bjdooks/linux: (21 commits) mach-ux500: set proper I2C platform data from MOP500s i2c-nomadik: break out single messsage transmission i2c-nomadik: reset the hw after status check i2c-nomadik: remove the unnecessary delay i2c-nomadik: change the TX and RX threshold i2c-nomadik: add code to retry on timeout failure i2c-nomadik: use pm_runtime API i2c-nomadik: print abort cause only on abort tag i2c-nomadik: correct adapter timeout initialization i2c-nomadik: remove the redundant error message i2c-nomadik: corrrect returned error numbers i2c-nomadik: fix speed enumerator i2c-nomadik: make i2c timeout specific per i2c bus i2c-nomadik: add regulator support i2c: i2c-sh_mobile bus speed platform data V2 i2c: i2c-sh_mobile clock string removal i2c-eg20t: Support new device ML7223 IOH i2c: tegra: Add de-bounce cycles. i2c: tegra: fix repeated start handling i2c: tegra: recover from spurious interrupt storm ...
2011-05-24i2c-i801: Don't depend on other kernel driver config optionsJean Delvare1-0/+1
Don't let other driver config options influence us, as it makes the code more complex and fragile for a small benefit. There's nothing wrong with instantiating I2C devices even if they don't have a driver. And we're talking about 835 extra bytes in the binary on x86-64, that's hardly worth arguing about. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Woodhouse <david.woodhouse@intel.com> Cc: Hans de Goede <hdegoede@redhat.com>
2011-05-24i2c-i801: SMBus patch for Intel Panther Point DeviceIDsSeth Heasley1-0/+1
This patch adds the SMBus controller DeviceID for the Intel Panther Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-11i2c-eg20t: Support new device ML7223 IOHTomoya MORINAGA1-3/+7
Support new device OKI SEMICONDUCTOR ML7223 IOH(Input/Output Hub). The ML7223 IOH is for MP(Media Phone) use. The ML7223 is companion chip for Intel Atom E6xx series. The ML7223 is completely compatible for Intel EG20T PCH. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-03-22Merge branch 'for-linus/2639/i2c-2' of git://git.fluff.org/bjdooks/linuxLinus Torvalds1-8/+24
* 'for-linus/2639/i2c-2' of git://git.fluff.org/bjdooks/linux: i2c-pxa2xx: Don't clear isr bits too early i2c-pxa2xx: Fix register offsets i2c-pxa2xx: pass of_node from platform driver to adapter and publish i2c-pxa2xx: check timeout correctly i2c-pxa2xx: add support for shared IRQ handler i2c-pxa2xx: Add PCI support for PXA I2C controller ARM: pxa2xx: reorganize I2C files i2c-pxa2xx: use dynamic register layout i2c-mxs: set controller to pio queue mode after reset i2c-eg20t: support new device OKI SEMICONDUCTOR ML7213 IOH i2c/busses: Add support for Diolan U2C-12 USB-I2C adapter
2011-03-22Merge branches 'for-2639/i2c/i2c-ce4100-v6', 'for-2639/i2c/i2c-eg20t-v3' and ↵Ben Dooks1-8/+14
'for-2639/i2c/i2c-imx' into for-linus/2639/i2c-2
2011-03-21i2c-pxa2xx: Add PCI support for PXA I2C controllerSebastian Andrzej Siewior1-2/+5
The Sodaville I2C controller is almost the same as found on PXA2xx. The difference: - the register are at a different offset - no slave support The PCI probe code adds three platform devices which are probed then by the platform code. The X86 part also adds dummy clock defines because we don't have HW clock support. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-03-21Merge branch 'for-2639/i2c/i2c-u2c12' into for-linus/2639/i2c-12Ben Dooks1-0/+10
2011-03-20i2c-i801: SMBus patch for Intel DH89xxCC DeviceIDsSeth Heasley1-1/+2
Add the SMBus Controller DeviceIDs for the Intel DH89xxCC PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-03-18Merge branch 'for-linus/2639/i2c-1' of git://git.fluff.org/bjdooks/linuxLinus Torvalds1-1/+18
* 'for-linus/2639/i2c-1' of git://git.fluff.org/bjdooks/linux: i2c-mpc: Add support for 64bit system i2c: add driver for Freescale i.MX28 i2c: tegra: Add i2c support
2011-03-17unicore32 machine related files: add i2c bus drivers for pkunity-v3 socGuanXuetao1-0/+11
change from original version -- by advice of Jean Delvare 1. remove global variable i2c_reg, replaced by local variables 2. replace ENXIO with ENODEV when no platform resources 3. add adapter->nr assignment before i2c_add_numbered_adapter() call 4. add judgement for i2c_del_adapter() return value 5. release adapter when driver removed 6. add __devexit for puv3_i2c_remove() function 7. modify several names to more appropriated ones Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-03-16Merge branches 'for-2639/i2c/i2c-tegra', 'for-2639/i2c/i2c-mpc' and ↵Ben Dooks1-1/+11
'for-2639/i2c/i2c-imx' into for-linus/2639/i2c-1
2011-03-16i2c-mpc: Add support for 64bit systemKumar Gala1-1/+1
Currently i2c-mpc supports 32bit system only, this modification makes it supported on both 32-bit and 64-bit systems. The P5020 is the first 64-bit PPC system with the i2c-mpc controller. Based in patch from Xulei <B33228@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-03-02i2c-eg20t: support new device OKI SEMICONDUCTOR ML7213 IOHTomoya MORINAGA1-6/+9
Support new device OKI SEMICONDUCTOR ML7213 IOH. The ML7213 which is for IVI(In-Vehicle Infotainment) is a companion chip for the Atom E6xx series and compatible with the Intel EG20T PCH. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-02-23i2c: add driver for Freescale i.MX28Wolfram Sang1-0/+10
Currently only supporting the PIOQUEUE-mode, because DMA-support for this platform is not yet in mainline. When it becomes available and support has been added to this driver, it will also be suitable for i.MX23 and STMP3xxx. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-02-23i2c: tegra: Add i2c supportColin Cross1-0/+7
Adds I2C bus driver for nVidia Tegra SoCs. Tegra includes 4 I2C controllers, one of which is inside the Dynamic Voltage Controller and has a slightly different register map. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-01-27i2c/busses: Add support for Diolan U2C-12 USB-I2C adapterGuenter Roeck1-0/+10
This patch adds support for the Diolan U2C-12 USB-I2C adapter. It also updates MAINTAINERS to list the author as maintainer. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-01-04i2c-eg20t: add driver for Intel EG20TTomoya MORINAGA1-0/+8
I2C driver for Intel EG20T PCH Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Reviewed-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Qi Wang <qi.wang@intel.com> [ben-linux@fluff.org: reworded commit message] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-10-31i2c-i801: Add Intel Patsburg device IDSeth Heasley1-0/+1
Add support for the Intel Patsburg PCH SMBus Controller. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-30Merge branch 'for-2637/i2c-all' of git://git.fluff.org/bjdooks/linuxLinus Torvalds1-0/+10
* 'for-2637/i2c-all' of git://git.fluff.org/bjdooks/linux: i2c-intel-mid: Driver depends on PCI i2c-intel-mid: support for Moorestown and Medfield platform i2c-nomadik: fixup bus delays i2c-nomadik: support smbus emulation i2c-nomadik: dynamic clocking i2c-nomadik: documentation fixes i2c-s3c2410: Enable i2c clock only when doing some transfert
2010-10-30i2c-intel-mid: Driver depends on PCIRandy Dunlap1-0/+1
i2c-intel-mid driver uses PCI data structs and interfaces, so it should depend on PCI. Fixes these build errors: drivers/i2c/busses/i2c-intel-mid.c:977: error: implicit declaration of function 'pci_request_region' drivers/i2c/busses/i2c-intel-mid.c:1077: error: implicit declaration of function 'pci_release_region' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Ba Zheng <zheng.ba@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: linux-i2c@vger.kernel.org Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-10-28i2c-intel-mid: support for Moorestown and Medfield platformAlan Cox1-0/+9
(Updated to address Ben's comments. With regard to the message segment restriction it's not something we hit on the actual platform so while I will investigate that further I don't think its a blocker to submission. At worst its a spot over-restrictive) From: Wen Wang <wen.w.wang@intel.com> Initial release of the driver. Updated and verified on hardware. Cleaned up as follows Alan Cox: Squash down the switches into tables, and use the PCI ident field. We could perhaps take this further and put the platform and port number into this. uint32t -> u32 bracketing of case statements spacing and '!' usage Check the speed (which is now 0/1/2) is valid and ignore otherwise. Fix remaining problems/suggestions from Jean's review Fix items from Ben's review Arjan van de Ven: Initial power management hooks Yong Wang <youg.y.wang@intel.com>: Shared IRQ support Wen Wang <wen.w.wang@intel.com>: D3 support Fixes for OCT test runs Interrupt optimisations Hong Liu <hong.liu@intel.com> The runtime PM code is working on the wrong device (i2c_adapter->dev). The correct one should be pci_dev->dev. This breaks attached i2c slave devices with runtime PM enabled. Slave device needs to runtime resume parent device before runtime resuming itself, but we always get error since we don't have pm_runtime callback for i2c_adapter->dev. Bin Yang <bin.yang@intel.com>: Update speed table Saadi Maalem <saadi.maalem@intel.com>: Clear all interrupts in the hardware init Celine Chotard <celinex.chotard@intel.com>: Correct ordering of clear/disable of IRQs Signed-off-by: Wen Wang <wen.w.wang@intel.com> Signed-off-by: Yong Wang <yong.y.wang@intel.com> Signed-off-by: Hong Liu <hong.liu@intel.com> Signed-off-by: Bin Yang <bin.yang@intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-10-18PCI: update Intel chipset names and definesSeth Heasley1-2/+2
This patch updates the defines for Intel devices in include/linux/pci_ids.h, referenced in arch/x86/pci/irq.c and drivers/i2c/busses/i2c-i801.c, reflecting approved legal branding, and using fuller code-names for products under development. Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-14Merge branch 'for-linus/i2c-2636' of git://git.fluff.org/bjdooks/linuxLinus Torvalds1-2/+9
* 'for-linus/i2c-2636' of git://git.fluff.org/bjdooks/linux: i2c/nuc900: add i2c driver support for nuc900 i2c: Enable NXP LPC support in Kconfig i2c-pxa: fix compiler warning, due to missing const i2c: davinci: bus recovery procedure to clear the bus i2c: davinci: Add cpufreq support i2c: davinci: Add suspend/resume support i2c: davinci: Add helper functions for power management i2c: davinci: misc. cleanups: remove MOD_REG_BIT and IO_ADDRESS usage i2c: davinci: Fix smbus Oops with AIC33 usage
2010-08-11Merge branch 'for-2636/i2c/nuc' into next-i2cBen Dooks1-0/+7
2010-08-11i2c/nuc900: add i2c driver support for nuc900Wan ZongShun1-0/+7
This patch is to add i2c driver support for nuc900. Signed-off-by: Wan ZongShun <mcuos.com@gmail.org> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-08-11i2c: Enable NXP LPC support in KconfigKevin Wells1-2/+2
NXP LPC series processors use the IP3204 I2C block shared with the Philips PNX4008 processor. Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-08-09Merge branch 'for-rmk' of ↵Russell King1-2/+9
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable Conflicts: arch/arm/Kconfig
2010-08-05ARM: SAMSUNG: i2c/busses: Add HAVE_S3C2410_I2C option to include I2C for ↵Naveen Krishna Ch1-2/+9
Samsung SoCs This patch adds HAVE_S3C2410_I2C to control inclusion of I2C bus driver on Samsung SoCs and makes I2C bus driver dependency SoC specific instead of machine specific. This will enalbe all machines using Samsung ARCH_S3C2410, _S3C64XX, _S5P6440, _S5PC100, and _S5PV210 to select the I2C driver by default Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org>
2010-07-05Merge branch 'master' of ↵Paul Mundt1-20/+20
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: include/linux/serial_sci.h Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-03i2c/busses: Move two drivers to embedded sectionWolfram Sang1-20/+20
And fix a typo while we are here Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-05-20Merge branch 'master' of ↵Paul Mundt1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2010-05-02ARM: Add Versatile Express supportRussell King1-1/+1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-07i2c: i2c-sh_mobile kconfig update for SH-Mobile ARMMagnus Damm1-1/+1
Update the Kconfig entry for the i2c-sh_mobile driver to enable build on SH-Mobile ARM platforms Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-08Merge branch 'for-linus/i2c' of git://git.fluff.org/bjdooks/linuxLinus Torvalds1-4/+20
* 'for-linus/i2c' of git://git.fluff.org/bjdooks/linux: i2c: Add support for Xilinx XPS IIC Bus Interface i2c: omap: Add support for 16-bit registers i2c-pnx: fix setting start/stop condition powerpc: doc/dts-bindings: update doc of FSL I2C bindings i2c-mpc: add support for the MPC512x processors from Freescale i2c-mpc: rename "setclock" initialization functions to "setup" i2c-mpc: use __devinit[data] for initialization functions and data i2c/imx: don't add probe function to the driver struct i2c: Add support for Ux500/Nomadik I2C controller
2010-03-08Merge branch 'next-i2c-xilinx' into next-i2cBen Dooks1-0/+10
2010-03-08i2c: Add support for Xilinx XPS IIC Bus InterfaceRichard Röjfors1-0/+10
This patch adds support for the Xilinx XPS IIC Bus Interface. The driver uses the dynamic mode, supporting to put several I2C messages in the FIFO to reduce the number of interrupts. It has the same feature as ocores, it can be passed a list of devices that will be added when the bus is probed. Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-08i2c-mpc: add support for the MPC512x processors from FreescaleWolfgang Grandegger1-4/+3
As I2C interrupts must be enabled for the MPC512x by the setup function as well, "fsl,preserve-clocking" is handled in a slighly different way. Also, the old settings are now reported calling dev_dbg(). For the MPC512x the clock setup function of the MPC52xx can be re-used. Furthermore, the Kconfig help has been updated and corrected. Signed-off-by: Wolfgang Grandegger <wg@denx.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-08i2c: Add support for Ux500/Nomadik I2C controllersrinidhi kasagar1-0/+7
This adds support for ST-Ericsson's I2C block found in Ux500 and Nomadik 8815 platforms. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-08mfd: Fix lpc_sch related depends/selects, fix build errorRandy Dunlap1-0/+2
LPC_SCH is selected by GPI_SCH and I2C_ISCH, even when PCI is not enabled, but LPC_SCH depends on PCI, so make GPI_SCH and I2C_ISCH also depend on PCI. Those 2 selects also need to select what LPC_SCH selects, since kconfig does not follow selects. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Denis Turischev <denis@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-08i2c: convert i2c-isch to platform_deviceDenis Turischev1-1/+1
Convert i2c-isch to platform_device for the lpc mfd core to add it at probe time. Signed-off-by: Denis Turischev <denis@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-02i2c-parport-light: Add SMBus alert supportJean Delvare1-0/+1
Add support for the SMBus alert mechanism to the i2c-parport-light driver. The ADM1032 evaluation board at least is properly wired for this. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Trent Piepho <tpiepho@freescale.com>
2010-03-02i2c-parport: Add SMBus alert supportJean Delvare1-0/+1
Add support for the SMBus alert mechanism to the i2c-parport driver. The ADM1032 evaluation board at least is properly wired for this. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Trent Piepho <tpiepho@freescale.com>
2010-03-02i2c-i801: Add Intel Cougar Point device IDsSeth Heasley1-2/+3
Add the Intel Cougar Point (PCH) SMBus controller device IDs. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-02-27MIPS: I2C: Add driver for Cavium OCTEON I2C ports.Rade Bozic1-0/+10
Signed-off-by: Rade Bozic <rade.bozic.ext@nsn.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Michael Lawnick <michael.lawnick.ext@nsn.com> To: linux-mips@linux-mips.org To: linux-i2c@vger.kernel.org To: ben-linux@fluff.org To: khali@linux-fr.org Cc: rade.bozic.ext@nsn.com Cc: Michael Lawnick <michael.lawnick.ext@nsn.com> Patchwork: http://patchwork.linux-mips.org/patch/890/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-06i2c-voodoo3: DeleteJean Delvare1-16/+0
Superseded by tdfxfb. I2C/DDC support used to live in a separate driver but this caused driver conflicts. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
2009-11-07i2c-piix4: Modify code name SB900 to Hudson-2Crane Cai1-1/+1
Change SB900 to its formal code name Hudson-2. Signed-off-by: Crane Cai <crane.cai@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-25Merge branch 'origin' into for-linusRussell King1-1/+18
Conflicts: MAINTAINERS
2009-09-19i2c: Clearly mark ACPI drivers as suchJean Delvare1-11/+16
Now that we have ACPI-based SMBus controller drivers, and we will start telling users to use them instead of native drivers when I/O resources conflict, I think it would be good to clearly mark ACPI drivers as such in Kconfig. This is exactly the same as we just did for hwmon drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Crane Cai <crane.cai@amd.com>
2009-09-19i2c: Add driver for SMBus Control Method InterfaceCrane Cai1-0/+11
This driver supports the SMBus Control Method Interface. It needs BIOS declare ACPI control methods which described in SMBus Control Method Interface Spec. http://smbus.org/specs/smbus_cmi10.pdf Signed-off-by: Crane Cai <crane.cai@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-29 19:56:49 +0300