summaryrefslogtreecommitdiff
path: root/drivers/hwmon
AgeCommit message (Collapse)AuthorFilesLines
2022-03-28Merge tag 'char-misc-5.18-rc1' of ↵Linus Torvalds7-0/+1321
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...
2022-03-25Merge tag 'mfd-next-5.18' of ↵Linus Torvalds3-0/+116
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for Maxim MAX77714 PMIC Removed Drivers: - Remove support for ST-Ericsson AB8500 DebugFS New Device Support: - Add support for Silergy SY7636A to Simple MFD I2C - Add support for MediaTek MT6366 PMIC to MT6358 IRQ - Add support for Charger to Intel PMIC CRC - Add support for Raptor Lake to Intel LPSS PCI New Functionality: - Add support for Reboot to Rockchip RK808 Fix-ups: - Device Tree changes (includcing YAML conversion) for silergy,sy7636a, maxim,max77843, google,cros-ec, maxim,max14577, maxim,max77802, maxim,max77714, qcom,tcsr, qcom,spmi-pmic, stericsson,ab8500, stericsson,db8500-prcmu, samsung,exynos5433-lpass, mt6397, syscon, brcm,cru - Visible to menuconfig; simple-mfd-i2c - Clean-up or clarify code; max77686, intel_soc_pmic_crc - Improve error handling; mc13xxx-core, stmfx, asic3 - Pass device information to child devices; iqs62x, intel-lpss-acpi - Individually identify IRQ domains; intel_soc_pmic_core - Remove superfluous code; dbx500-prcmu, exynos-lpass - Staticify and constify; arizona-i2c - Mark sometimes used data as __maybe_unused; atmel-flexcom - Account for different ACPI tables on AOSP/Windows platforms; arizona-spi - Use provided (platform) APIs; ab8500-core - Trivial (whitespace, spelling); rohm-bd9576" * tag 'mfd-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits) dt-bindings: mfd: syscon: Add microchip,lan966x-cpu-syscon compatible mfd: bd9576: fix typos in comments mfd: Use platform_get_irq() to get the interrupt mfd: db8500-prcmu: Remove unused inline function mfd: arizona-spi: Add Android board ACPI table handling mfd: arizona-spi: Split Windows ACPI init code into its own function mfd: asic3: Add missing iounmap() on error asic3_mfd_probe MAINTAINERS: Rectify entry for ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS mfd: intel-lpss: Provide an SSP type to the driver dt-bindings: mfd: brcm,cru: Rename pinctrl node dt-bindings: Add compatibles for undocumented trivial syscons mfd: atmel-flexcom: Fix compilation warning dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema mfd: exynos-lpass: Drop unneeded syscon.h include mfd: intel-lpss: Add Intel Raptor Lake PCH-S PCI IDs mfd: ab8500: Drop debugfs module mfd: sta2x11: Use GFP_KERNEL instead of GFP_ATOMIC mfd: ab8500: Rewrite bindings in YAML mfd: qcom-spmi-pmic: Add pm8953 compatible ...
2022-03-22Merge tag 'spi-v5.18' of ↵Linus Torvalds3-8/+3
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The overwhelming bulk of this pull request is a change from Uwe Kleine-König which changes the return type of the remove() function to void as part of some wider work he's doing to do this for all bus types, causing updates to most SPI device drivers. The branch with that on has been cross merged with a couple of other trees which added new SPI drivers this cycle, I'm not expecting any build issues resulting from the change. Otherwise it's been a relatively quiet release with some new device support, a few minor features and the welcome completion of the conversion of the subsystem to use GPIO descriptors rather than numbers: - Change return type of remove() to void. - Completion of the conversion of SPI controller drivers to use GPIO descriptors rather than numbers. - Quite a few DT schema conversions. - Support for multiple SPI devices on a bus in ACPI systems. - Big overhaul of the PXA2xx SPI driver. - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and Sunplus SP7021" [ And this is obviously where that spi change that snuck into the regulator tree _should_ have been :^] * tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits) spi: fsi: Implement a timeout for polling status spi: Fix erroneous sgs value with min_t() spi: tegra20: Use of_device_get_match_data() spi: mediatek: add ipm design support for MT7986 spi: Add compatible for MT7986 spi: sun4i: fix typos in comments spi: mediatek: support tick_delay without enhance_timing spi: Update clock-names property for arm pl022 spi: rockchip-sfc: fix platform_get_irq.cocci warning spi: s3c64xx: Add spi port configuration for Tesla FSD SoC spi: dt-bindings: samsung: Add fsd spi compatible spi: topcliff-pch: Prevent usage of potentially stale DMA device spi: tegra210-quad: combined sequence mode spi: tegra210-quad: add acpi support spi: npcm-fiu: Fix typo ("npxm") spi: Fix Tegra QSPI example spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ spi: cadence: fix platform_get_irq.cocci warning spi: Update NXP Flexspi maintainer details dt-bindings: mfd: maxim,max77802: Convert to dtschema ...
2022-03-19hwmon: (dell-smm) Add Inspiron 3505 to fan type blacklistArmin Wolf1-0/+7
Sadly, while firmware 1.5 fixed temperature labels on my Inspiron 3505, it also caused fan type calls to take ca. 4 seconds with the fan being at full speed. Fix the resulting delays by adding the model to the blacklist. Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20220318183408.13286-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-03-18hwmon: (pmbus) Add Vin unit off handlingBrandon Wyman2-1/+2
If there is an input undervoltage fault, reported in STATUS_INPUT command response, there is quite likely a "Unit Off For Insufficient Input Voltage" condition as well. Add a constant for bit 3 of STATUS_INPUT. Update the Vin limit attributes to include both bits in the mask for clearing faults. If an input undervoltage fault occurs, causing a unit off for insufficient input voltage, but the unit is off bit is not cleared, the STATUS_WORD will not be updated to clear the input fault condition. Including the unit is off bit (bit 3) allows for the input fault condition to completely clear. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20220317232123.2103592-1-bjwyman@gmail.com Fixes: b4ce237b7f7d3 ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers") [groeck: Dropped unnecessary ()] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-03-16hwmon: (scpi-hwmon): Use of_device_get_match_data()Minghao Chi1-4/+2
Use of_device_get_match_data() to simplify the code. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Reviewed-by: Jean Delvare <jdelvare@suse.de> Link: https://lore.kernel.org/r/20220315023412.2118415-1-chi.minghao@zte.com.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-03-08hwmon: (axi-fan-control) Use hwmon_notify_eventNuno Sá1-1/+2
Instead of directly accessing kobj directly from the driver, use the hwmon notify API. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220308135408.440744-1-nuno.sa@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-03-08hwmon: (vexpress-hwmon) Use of_device_get_match_data()Minghao Chi (CGEL ZTE)1-4/+2
Use of_device_get_match_data() to simplify the code. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220307033631.2075160-1-chi.minghao@zte.com.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-03-03hwmon: Add driver for Texas Instruments TMP464 and TMP468Guenter Roeck3-0/+724
Add support for Texas Instruments TMP464 and TMP468 temperature sensor ICs. TI's TMP464 is an I2C temperature sensor chip. This chip is similar to TI's TMP421 chip, but with 16bit-wide registers (instead of 8bit-wide registers). The chip has one local sensor and four remote sensors. TMP468 is similar to TMP464 but has one local and eight remote sensors. Originally-from: Agathe Porte <agathe.porte@nokia.com> Cc: Agathe Porte <agathe.porte@nokia.com> Cc: Krzysztof Adamski <krzysztof.adamski@nokia.com> Tested-by: Agathe Porte <agathe.porte@nokia.com> Link: https://lore.kernel.org/r/20220222223610.23098-2-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-03-02hwmon: (adm1275) Allow setting sample averagingPotin Lai1-1/+39
Current driver assume PWR_AVG and VI_AVG as 1 by default, and user needs to set sample averaging via sysfs manually. This patch parses the properties "adi,power-sample-average" and "adi,volt-curr-sample-average" from device tree, and setting sample averaging during probe. Input value must be one of value in the list [1, 2, 4, 8, 16, 32, 64, 128]. Signed-off-by: Potin Lai <potin.lai@quantatw.com> Link: https://lore.kernel.org/r/20220302123817.27025-2-potin.lai@quantatw.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-03-02hwmon: (xdpe12284) Add regulator supportMarcello Sylvester Bauer2-0/+17
Add simple on/off regulator support for xdpe12284 and other pmbus parts supported by the xdpe12284 driver. Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Link: https://lore.kernel.org/r/f69b8e7fa32cd2bad9516d8fa590abb87c7e4869.1646214248.git.sylv@sylv.io Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-03-02hwmon: (xdpe12284) Add support for xdpe11280Marcello Sylvester Bauer1-3/+18
Add support for another Infineon Multi-phase controller chip. The xdpe11280 uses linear instead of vid data format for VOUT. Detect VOUT_MODE format during identification and skip the xdpe122 related adaptions in case it is linear. Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Link: https://lore.kernel.org/r/fa6a4b636a05ecb337d132824efca2545188a2a2.1646214248.git.sylv@sylv.io Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28Merge 5.17-rc6 into char-misc-nextGreg Kroah-Hartman3-7/+14
We need the char-misc fixes in here. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-28hwmon: (aquacomputer_d5next) Add support for Aquacomputer Farbwerk 360Aleksa Savic1-124/+255
Extend aquacomputer_d5next driver to expose hardware temperature sensors of the Aquacomputer Farbwerk 360 RGB controller, which communicates through a proprietary USB HID protocol. Four temperature sensors are available. Additionally, serial number and firmware version are exposed through debugfs. This driver has been tested on x86_64. Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (sch5627) Add pwmX_auto_channels_temp supportArmin Wolf1-0/+61
After doing some research, it seems that Fujitsu's hardware monitoring solution exports data describing which temperature sensors affect which fans, similar to the data in fan_source of the ftsteutates driver. Writing 0 into these registers forces the fans to full speed. Export this data with standard attributes. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20220224061210.16452-3-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (core) Add support for pwm auto channels attributeArmin Wolf1-0/+1
pwm[1-*]_auto_channels_temp is documented as an official hwmon sysfs attribute, yet there is no support for it in the new with_info-API. Fix that. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20220224061210.16452-2-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (lm70) Add ti,tmp125 supportChristian Lamparter2-2/+18
The TMP125 is a 2 degree Celsius accurate Digital Temperature Sensor with a SPI interface. The temperature register is a 16-bit, read-only register. The MSB (Bit 15) is a leading zero and never set. Bits 14 to 5 are the 1+9 temperature data bits in a two's complement format. Bits 4 to 0 are useless copies of Bit 5 value and therefore ignored. This was tested on a Aerohive HiveAP-350. Bonus: lm70 supports TMP122/TMP124 as well. I added them to the Kconfig module description. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Link: https://lore.kernel.org/r/43b19cbd4e7f51e9509e561b02b5d8d0e7079fac.1645175187.git.chunkeey@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (pmbus/pli1209bc) Add regulator supportMarcello Sylvester Bauer2-0/+38
Add regulator support for PLI1209BC Digital Supervisor. Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Link: https://lore.kernel.org/r/21b0cdb6dd72654effa451d3b1636ecd07b160e9.1645435888.git.sylv@sylv.io Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (pmbus) Add support for pli1209bcMarcello Sylvester Bauer3-0/+125
PLI1209BC is a Digital Supervisor from Vicor Corporation. Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Link: https://lore.kernel.org/r/4e016e66275bc46c90974aec18b150c874e64787.1645435888.git.sylv@sylv.io Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (occ) Add soft minimum power cap attributeEddie James1-3/+16
Export the power caps data for the soft minimum power cap through hwmon. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220215151022.7498-5-eajames@linux.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (pmbus) Add regulator supply into macroMarcello Sylvester Bauer1-0/+1
Add regulator supply into PWBUS_REGULATOR macro. This makes it optional to define a vin-supply in DT. Not defining a supply will add a dummy regulator supply instead and only cause the following debug output: ``` Looking up vin-supply property in node [...] failed ``` Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Link: https://lore.kernel.org/r/58f2ff7b90233fad3d7ae2e9d66d5192e2c1ac01.1645437439.git.sylv@sylv.io Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (dell-smm) Improve temperature sensors detectionArmin Wolf1-0/+5
On the Dell Inspiron 3505, three temperature sensors are available through the SMM interface. However since they do not have an associated type, they are not detected. Probe for those sensors in case no type was detected. _i8k_get_temp() is used instead of i8k_get_temp() since it is sometimes faster and the result is easier to check (no -ENODATA) since we do not care about the actual temp value. Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20220215191113.16640-5-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (dell-smm) Make fan/temp sensor number a u8Armin Wolf1-23/+45
Right now, we only use bits 0 to 7 of the fan/temp sensor number by doing number & 0xff. Passing the value as a u8 makes this step unnecessary. Also add checks to the ioctl handler since users might get confused when passing 0x00000101 does the same as passing 0x00000001. Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20220215191113.16640-4-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (dell-smm) Reword and mark parameter "force" as unsafeArmin Wolf1-2/+2
When enabling said module parameter, the driver ignores all feature blacklists on relevant models, which has the potential for strange side effects. Also there seems to be a slight chance for unsupported devices to behave badly when probed for features. In such cases, the kernel should be tainted to inform people that these issues might have been caused by the dell_smm_hwmon driver with "force" enabled. Also reword the parameter description to remind users that enabling "force" also enables blacklisted features. Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20220215191113.16640-8-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (occ) Add sysfs entries for additional extended status bitsEddie James1-0/+24
Add sysfs entries for DVFS due to a VRM Vdd over-temperature condition, and add the GPU throttling condition bits (such that if bit 1 is set, GPU1 is throttling). Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220215151022.7498-4-eajames@linux.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (occ) Add sysfs entry for OCC modeEddie James2-0/+12
BMC control applications need to check the OCC mode returned by the OCC poll response, so export it in sysfs with the other OCC-specific data. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220215151022.7498-3-eajames@linux.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (occ) Add sysfs entry for IPS (Idle Power Saver) statusEddie James2-0/+12
BMC control applications need to check the Idle Power Saver status byte returned by the OCC poll response, so export it in sysfs with the other OCC-specific data. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220215151022.7498-2-eajames@linux.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (asus-ec-sensors) do not print from .probe()Eugene Shalygin1-11/+5
Remove the call to dev_info() from the board detection function, which is called from probe(), not only to be in line with hwmon driver rules, but also because the message duplicates the error code returned from probe() for that case (ENODEV). Changes in: - v2: add missing newline (style). Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20220217194318.2960472-1-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (pmbus/lm25066) Add regulator supportZev Weiss2-0/+21
While these chips aren't strictly advertised as voltage regulators per se, they (aside from the lm25056) support the PMBus OPERATION command to enable and disable their outputs and have status bits for reporting various warnings and faults, and can hence usefully support all the pmbus_regulator_ops operations. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20220219000742.20126-1-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (pmbus) Add get_error_flags support to regulator opsZev Weiss1-0/+114
The various PMBus status bits don't all map perfectly to the more limited set of REGULATOR_ERROR_* flags, but there's a reasonable number where they correspond well enough. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20220219000359.19985-1-zev@bewilderbeest.net [groeck: Added missing locking] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (asus-ec-sensors) depend on X86 in KConfigEugene Shalygin1-0/+1
All the supported mainboards are for the X86 platform Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20220217073238.2479005-1-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (asus-ec-sensors) merge setup functionsEugene Shalygin1-25/+16
Merge configure_sensor_setup() into probe(). Changes: - v2: add local struct device *dev = &pdev->dev; - v3: initialize dev at declaration - v4: fix checkpatch warning - v5: fix formatting - v6: code style fixes Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (asus-ec-sensors) deduce sensor signedness from its typeEugene Shalygin1-9/+31
Reading DSDT code for ASUS X470-based boards (the ones served by the asus_wmi_Sensors driver), where ASUS put hardware monitoring functions into the WMI code, reveals that fan and current sensors data is unsigned. For the current sensor that was confirmed by a user who showed high enough current value for overflow. Thus let's assume that the signedness of the sensors is determined by its type and that only temperature ones provide signed numbers. Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20220211164855.265698-1-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (tc654) Add thermal_cooling device supportChristian Lamparter1-15/+89
Adds thermal_cooling device support to the tc654/tc655 driver. This make it possible to integrate it into a device-tree supported thermal-zone node as a cooling device. I have been using this patch as part of the Netgear WNDR4700 Centria NAS Router support within OpenWrt since 2016. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Link: https://lore.kernel.org/r/20220213004733.2421193-1-chunkeey@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (dell-smm) rewrite CONFIG_I8K descriptionMateusz Jończyk1-9/+8
It is not the laptops, but the /proc/i8k interface that is legacy (or so I think was the intention of the help text author). The old description was confusing, fix this. The phrase "Say Y if you intend to run this kernel on old Dell laptops or want to use userspace package i8kutils." was introduced in 2015, in commit 039ae58503f3 ("hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8k") I think that "old laptops" was about hotkey and Fn key support - this driver in the 2.4 kernels' era apparently had these capabilities (see: https://github.com/vitorafsr/i8kutils , description of "repeat_rate" kernel module parameter). Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: Pali Rohár <pali@kernel.org> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Mark Gross <markgross@kernel.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220212125654.357408-2-mat.jonczyk@o2.pl Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28x86/Kconfig: move and modify CONFIG_I8KMateusz Jończyk1-0/+16
In Kconfig, inside the "Processor type and features" menu, there is the CONFIG_I8K option: "Dell i8k legacy laptop support". This is very confusing - enabling CONFIG_I8K is not required for the kernel to support old Dell laptops. This option is specific to the dell-smm-hwmon driver, which mostly exports some hardware monitoring information and allows the user to change fan speed. This option is misplaced, so move CONFIG_I8K to drivers/hwmon/Kconfig, where it belongs. Also, modify the dependency order - change select SENSORS_DELL_SMM to depends on SENSORS_DELL_SMM as it is just a configuration option of dell-smm-hwmon. This includes changing the option type from tristate to bool. It was tristate because it could select CONFIG_SENSORS_DELL_SMM=m . When running "make oldconfig" on configurations with CONFIG_SENSORS_DELL_SMM enabled , this change will result in an additional question (which could be printed several times during bisecting). I think that tidying up the configuration is worth it, though. Next patch tweaks the description of CONFIG_I8K. Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: Pali Rohár <pali@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Mark Gross <markgross@kernel.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220212125654.357408-1-mat.jonczyk@o2.pl Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (asus-ec-sensors) add CPU core voltageEugene Shalygin1-10/+19
A user discovered [1] the CPU Core voltage sensor, which spans 2 registers and provides output in mV. Althroug the discovery was made with a X470 chipset, the sensor is present in X570 (tested with C8H). For now simply add it to each board with the CPU current sensor present. [1] https://github.com/zeule/asus-ec-sensors/issues/12 Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Denis Pauk <pauk.denis@gmail.com> Link: https://lore.kernel.org/r/20220208094244.1106312-1-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (adt7x10) Use hwmon_notify_eventCosmin Tanislav1-4/+4
The hwmon subsystem provides means of notifying userspace about events. Use it. Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Link: https://lore.kernel.org/r/20211221215841.2641417-8-demonsingur@gmail.com [groeck: Pass hwmon device to interrupt handler] Tested-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Reviewed-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (adt7x10) Remove empty driver removal callbackCosmin Tanislav4-21/+0
Not used to do anything anymore. Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Link: https://lore.kernel.org/r/20211221215841.2641417-6-demonsingur@gmail.com Tested-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Reviewed-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (adt7x10) Use devm_request_threaded_irqCosmin Tanislav1-5/+5
To simplify the core driver remove function. Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Link: https://lore.kernel.org/r/20211221215841.2641417-5-demonsingur@gmail.com Tested-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Reviewed-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (adt7x10) Use devm_hwmon_device_register_with_infoCosmin Tanislav2-126/+125
Describe the only available channel, implement read, write and is_visible callbacks. Also, pass name to core driver for the i2c device so that it can be used to register hwmon device. Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Link: https://lore.kernel.org/r/20211221215841.2641417-4-demonsingur@gmail.com [groeck: Adjusted to use regmap] Tested-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Reviewed-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (adt7x10) Add device managed action for restoring configCosmin Tanislav1-5/+11
To simplify the core driver remove function. Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Link: https://lore.kernel.org/r/20211221215841.2641417-3-demonsingur@gmail.com [groeck: Adjust to use regmap; only register restore function if needed] Tested-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Reviewed-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (adt7x10) Convert to use regmapGuenter Roeck5-188/+213
Using regmap lets us use the regmap subsystem for SPI vs. I2C register accesses. It lets us hide access differences in backend code and lets the common code just access registers without knowing their size. We can also use regmap for register caching. Tested-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Reviewed-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (nct6775) add ASUS ROG STRIX Z390/Z490/X570-* / PRIME X570-PDenis Pauk1-0/+13
Boards such as * PRIME X570-P, * ROG STRIX B550-F GAMING WIFI II, * ROG STRIX B550-XE GAMING (WI-FI), * ROG STRIX X570-E GAMING, * ROG STRIX Z390-F GAMING, * ROG STRIX Z390-H GAMING, * ROG STRIX Z390-I GAMING, * ROG STRIX Z490-A GAMING, * ROG STRIX Z490-E GAMING, * ROG STRIX Z490-F GAMING, * ROG STRIX Z490-G GAMING, * ROG STRIX Z490-G GAMING (WI-FI), * ROG STRIX Z490-H GAMING have got a nct6775 chip, but by default there's no use of it because of resource conflict with WMI method. This commit adds such boards to the WMI monitoring list. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807 Signed-off-by: Denis Pauk <pauk.denis@gmail.com> Tested-by: Per Melin <kernel@melin.net> Tested-by: Jaap de Haan <jaap.dehaan@freenet.de> Link: https://lore.kernel.org/r/20220207214815.10995-1-pauk.denis@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (asus-ec-sensors) read sensors as signed intsEugene Shalygin1-8/+8
Temperature sensor readings are signed, which is hinted by their blank value (oxd8, 216 as unsigned and -40 as signed). T_Sensor, Crosshair VIII Hero, and a freezer were used to confirm that. Here we read fan sensors as signed too, because with their typical values and 2-byte width, I can't tell a difference between signed and unsigned, as I don't have a high speed chipset fan. Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20220204163045.576903-1-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (asus-ec-sensors) fix a typo in asus_ec_probe()Dan Carpenter1-1/+1
There is no such struct as "asus_ec_sensors", it was supposed to be "ec_sensors_data". This typo does not affect either build or runtime. Fixes: c4b1687d6897 ("hwmon: (asus-ec-sensors) add driver for ASUS EC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220205092015.GA612@kili Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (asus-ec-sensors) Add Crosshair VIII Hero WiFiEugene Shalygin1-0/+6
The Wi-Fi variant of Crosshair VIII Hero provides the same sensors, which was tested by a Libre Hardware Monitor user [1]. [1] https://github.com/LibreHardwareMonitor/LibreHardwareMonitor/pull/453#issuecomment-1028398487 Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20220203203052.441712-1-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (max6639) Add regulator supportMarcello Sylvester Bauer1-8/+54
Add regulator support for boards where the fan-supply have to be powered up before it can be used. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Link: https://lore.kernel.org/r/2cb9ed600fb43cdc604799746fbde2e2942cdca6.1643299570.git.sylv@sylv.io Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: (mlxreg-fan) Use pwm attribute for setting fan speed low limitVadim Pasternak1-57/+27
Recently 'cur_state' user space 'sysfs' interface 'sysfs' has been deprecated. This interface is used in Nvidia systems for setting fan speed limit. Currently fan speed limit is set from the user space by setting 'sysfs' 'cur_state' attribute to 'max_state + n', where 'n' is required limit, for example: 15 for 50% speed limit, 20 for full fan speed enforcement. The purpose of this feature is to provides ability to limit fan speed according to some system wise considerations, like absence of some replaceable units (PSU or line cards), high system ambient temperature, unreliable transceivers temperature sensing or some other factors which indirectly impacts system's airflow. The motivation is to support fan low limit feature through 'hwmon' interface. Use 'hwmon' 'pwm' attribute for setting low limit for fan speed in case 'thermal' subsystem is configured in kernel. In this case setting fan speed through 'hwmon' will never let the 'thermal' subsystem to select a lower duty cycle than the duty cycle selected with the 'pwm' attribute. From other side, fan speed is to be updated in hardware through 'pwm' only in case the requested fan speed is above last speed set by 'thermal' subsystem, otherwise requested fan speed will be just stored with no PWM update. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20220126141825.13545-1-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-28hwmon: deprecate asis_wmi_ec_sensors driverEugene Shalygin1-1/+4
Deprecate the asus_wmi_ec_sensors driver in favor of the asus_ec_sensors Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Reviewed-by: Oleksandr Natalenko <oleksandr@natalenko.name> Link: https://lore.kernel.org/r/20220124015658.687309-4-eugene.shalygin@gmail.com Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Denis Pauk <pauk.denis@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-28 09:42:24 +0300