summaryrefslogtreecommitdiff
path: root/drivers/hwmon/pmbus/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2021-06-17hwmon: (pmbus) Add driver for Delta DPS-920AB PSURobert Marko1-0/+9
This adds support for the Delta DPS-920AB PSU. Only missing feature is fan control which the PSU supports. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20210607103431.2039073-1-robert.marko@sartura.hr [groeck: Add MODULE_IMPORT_NS(PMBUS);] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus/pim4328) Add PMBus driver for PIM4006, PIM4328 and PIM4820Erik Rosen1-0/+9
Add hardware monitoring support for Flex power interface modules PIM4006, PIM4328 and PIM4820. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Add support for MPS Multi-phase mp2888 controllerVadim Pasternak1-0/+9
Add support for mp2888 device from Monolithic Power Systems, Inc. (MPS) vendor. This is a digital, multi-phase, pulse-width modulation controller. This device supports: - One power rail. - Programmable Multi-Phase up to 10 Phases. - PWM-VID Interface - One pages 0 for telemetry. - Programmable pins for PMBus Address. - Built-In EEPROM to Store Custom Configurations. - Can configured VOUT readout in direct or VID format and allows setting of different formats on rails 1 and 2. For VID the following protocols are available: VR13 mode with 5-mV DAC; VR13 mode with 10-mV DAC, IMVP9 mode with 5-mV DAC. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210511055619.118104-3-vadimp@nvidia.com [groeck: Add MODULE_IMPORT_NS] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Add support for additional Flex BMR converters to pmbusErik Rosen1-3/+4
Add support for Flex BMR310, BMR456, BMR457, BMR458, BMR480, BMR490, BMR491 and BMR492 to the pmbus driver Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210507194023.61138-4-erik.rosen@metormote.com [groeck: Fixed minor whitespace error] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus) Add pmbus driver for MAX15301Erik Rosen1-0/+9
Add pmbus driver support for Maxim MAX15301 InTune Automatically Compensated Digital PoL Controller with Driver and PMBus Telemetry Even though the specification does not specifically mention it, extensive empirical testing has revealed that auto-detection of limit-registers will fail in a random fashion unless the delay parameter is set to above about 80us. The default delay is set to 100us to include some safety margin. This patch is tested on a Flex BMR461 converter module. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210419101251.24840-1-erik.rosen@metormote.com [groeck: Added rationale for delay to driver header] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: Add driver for fsp-3y PSUs and PDUsVáclav Kubernát1-0/+10
This patch adds support for these devices: - YH-5151E - the PDU - YM-2151E - the PSU The device datasheet says that the devices support PMBus 1.2, but in my testing, a lot of the commands aren't supported and if they are, they sometimes behave strangely or inconsistently. For example, writes to the PAGE command requires using PEC, otherwise the write won't work and the page won't switch, even though, the standard says that PEC is optional. On the other hand, writes to SMBALERT don't require PEC. Because of this, the driver is mostly reverse engineered with the help of a tool called pmbus_peek written by David Brownell (and later adopted by my colleague Jan Kundrát). The device also has some sort of a timing issue when switching pages, which is explained further in the code. Because of this, the driver support is limited. It exposes only the values that have been tested to work correctly. Signed-off-by: Václav Kubernát <kubernat@cesnet.cz> Link: https://lore.kernel.org/r/20210414080019.3530794-1-kubernat@cesnet.cz [groeck: Fixed up "missing braces around initializer" from 0-day] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus/tps53679) Add support for TI TPS53676Erik Rosen1-2/+2
Add support for TI TPS53676 controller to the tps53679 pmbus driver The driver uses the USER_DATA_03 register to figure out how many phases are enabled and to which channel they are assigned, and sets the number of pages and phases accordingly. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210322193734.75127-3-erik.rosen@metormote.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus) Add driver for BluTek BPA-RS600Chris Packham1-0/+9
The BPA-RS600 is a compact 600W AC to DC removable power supply module. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210317040231.21490-3-chris.packham@alliedtelesis.co.nz [groeck: Added bpa-rs600 to index.rst] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus/stpddc60) Add ST STPDDC60 pmbus driverErik Rosen1-0/+10
Add hardware monitoring support for ST STPDDC60 Unversal Digital Multicell Controller. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210218115249.28513-3-erik.rosen@metormote.com [groeck: Fixed whitespace error in Makefile] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus) Add driver for Infineon IR36021Chris Packham1-0/+9
The IR36021 is a dual‐loop digital multi‐phase buck controller. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20210301035954.16713-3-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-29hwmon: (pmbus/max16601) Add support for MAX16508Guenter Roeck1-2/+2
MAX16508 is quite similar to MAX16601, except that it does not support the DEFAULT_NUM_POP register and we thus can not dynamically determine the number of populated phases. Cc: Alex Qiu <xqiu@google.com> Cc: Ugur Usug <Ugur.Usug@maximintegrated.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210125185327.93282-2-linux@roeck-us.net Reviewed-by: Alex Qiu <xqiu@google.com> Tested-by: Alex Qiu <xqiu@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-11hwmon: (pmbus) Driver for Delta power supplies Q54SJ108A2xiao.ma1-0/+9
The driver supports Q54SJ108A2 series modules of Delta. Standard attributes are in sysfs, and other attributes are in debugfs. Signed-off-by: xiao.ma <xiao.mx.ma@deltaww.com> Link: https://lore.kernel.org/r/20201202025900.1842-1-max701@126.com [groeck: Replaced spaces with tabs, dropped excessive spaces, fixed module prefix in documentation] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-07hwmon: Add driver for STMicroelectronics PM6764 Voltage RegulatorCharles1-0/+9
Add the pmbus driver for the STMicroelectronics pm6764 voltage regulator. the output voltage use the MFR_READ_VOUT 0xD4 vout value returned is linear11 Signed-off-by: Charles Hsu <hsu.yungteng@gmail.com> [groeck: Fixed various compile errors; marked pm6764tr_of_match __maybe_unused] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-10-04hwmon: (pmbus) Add support for MPS Multi-phase mp2975 controllerVadim Pasternak1-0/+9
Add support for mp295 device from Monolithic Power Systems, Inc. (MPS) vendor. This is a dual-loop, digital, multi-phase controller. This device: - Supports two power rail. - Provides 8 pulse-width modulations (PWMs), and can be configured up to 8-phase operation for rail 1 and up to 4-phase operation for rail 2. - Supports two pages 0 and 1 for telemetry and also pages 2 and 3 for configuration. - Can configured VOUT readout in direct or VID format and allows setting of different formats on rails 1 and 2. For VID the following protocols are available: VR13 mode with 5-mV DAC; VR13 mode with 10-mV DAC, IMVP9 mode with 5-mV DAC. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20200926204957.10268-2-vadimp@nvidia.com [groeck: Cleaned up a couple of error returns; fixed up API changes] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (pmbus/adm1266) Add support for GPIOsAlexandru Tachici1-0/+1
Adm1266 exposes 9 GPIOs and 16 PDIOs which are currently read-only. They are controlled by the internal sequencing engine. This patch makes adm1266 driver expose GPIOs and PDIOs to user-space using GPIO provider kernel api. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20200812142055.9213-4-alexandru.tachici@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (pmbus/adm1266) Add Block process callAlexandru Tachici1-0/+1
PmBus devices support Block Write-Block Read Process Call described in SMBus specification v 2.0 with the exception that Block writes and reads are permitted to have up 255 data bytes instead of max 32 bytes (SMBus). This patch adds Block WR process call support for ADM1266. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20200812142055.9213-3-alexandru.tachici@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23hwmon: (pmbus) Add support for ADM1266Alexandru Tachici1-0/+9
Add pmbus probing driver for the adm1266 Cascadable Super Sequencer with Margin Control and Fault Recording. Driver is using the pmbus_core, creating sysfs files under hwmon for inputs: vh1->vh4 and vp1->vp13. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20200812142055.9213-2-alexandru.tachici@analog.com [groeck: Use .probe_new function, adjust for changed pmbus_do_probe API] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: (pmbus/max20730) Add max20710 supportUgur Usug1-2/+2
Add support for max20710 into the existing max20730 driver. Signed-off-by: Ugur Usug <ugur.usug@maximintegrated.com> Link: https://lore.kernel.org/r/BYAPR11MB317423C13909AE6F1913BBD7FD9C0@BYAPR11MB3174.namprd11.prod.outlook.com [groeck: Fixed various whitespace errors] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-03hwmon: (pmbus) fix a typo in Kconfig SENSORS_IR35221 optionTao Ren1-1/+1
Fix a typo in SENSORS_IR35221 option: module name should be "ir35221" instead of "ir35521". Fixes: 8991ebd9c9a6 ("hwmon: (pmbus) Add client driver for IR35221") Cc: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Link: https://lore.kernel.org/r/20200702221349.18139-1-rentao.bupt@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-22hwmon: (pmbus) Driver for Maxim MAX16601Guenter Roeck1-0/+9
MAX16601 is a VR13.HC Dual-Output Voltage Regulator Chipset, implementing a (8+1) multiphase synchronous buck converter. Cc: Alex Qiu <xqiu@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-03-23hwmon: (pmbus) add support for 2nd Gen Renesas digital multiphaseGrant Peltier1-3/+3
Extend the isl68137 driver to provide support for 2nd generation Renesas digital multiphase voltage regulators. Signed-off-by: Grant Peltier <grantpeltier93@gmail.com> Link: https://lore.kernel.org/r/62c000adf0108aeb65d3f275f28eb26b690384aa.1584720563.git.grantpeltier93@gmail.com [groeck: Adjusted for new PMBus API function parameters] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-03-09hwmon: (pmbus/tps53679) Add support for TPS53647 and TPS53667Guenter Roeck1-2/+2
TPS53647 and TPS53667 are single channel, Step-Down Buck Controllers. TPS53647 supports 4 phases, TPS53667 supports 6 phases. The chips do not support per-phase output telemetry. Cc: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-03-09hwmon: (pmbus/tps53679) Add support for TPS53681Guenter Roeck1-2/+2
TPS53681 is a dual-channel multiphase step-down controller supporting per-phase and per-channel output telemetry. Cc: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-03-09hwmon: (pmbus/ltc2978) add support for more parts.Mike Jones1-5/+6
LTC2972, LTC2979, LTC3884, LTC3889, LTC7880, LTM4664, LTM4677, LTM4678, LTM4680, LTM4700. Signed-off-by: Mike Jones <michael-a1.jones@analog.com> Link: https://lore.kernel.org/r/1581032654-4330-1-git-send-email-michael-a1.jones@analog.com [groeck: Fixed checkpatch issues (long lines, whitespace)] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-24hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllersVadim Pasternak1-0/+9
Add support for devices XDPE12254, XDPE12284. All these device support two pages. The below lists of VOUT_MODE command readout with their related VID protocols, Digital to Analog Converter steps, supported by these devices: VR12.0 mode, 5-mV DAC - 0x01; VR12.5 mode, 10-mV DAC - 0x02; IMVP9 mode, 5-mV DAC - 0x03; AMD mode 6.25mV - 0x10. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Link: https://lore.kernel.org/r/20200113150841.17670-5-vadimp@mellanox.com [groeck: Added missing break statement] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-24hwmon: (pmbus/tps53679) Extend device list supported by driverVadim Pasternak1-2/+2
Extends driver with support of the additional devices: Texas Instruments Dual channel DCAP+ multiphase controllers: TPS53688. Extend Kconfig with added device. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Link: https://lore.kernel.org/r/20200113150841.17670-4-vadimp@mellanox.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-24hwmon: (pmbus) Driver for MAX20730, MAX20734, and MAX20743Guenter Roeck1-0/+9
Add support for Maxim MAX20730, MAX20734, MAX20743 Integrated, Step-Down Switching Regulators with PMBus support. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-24hwmon: (pmbus) Add MAX20796 to devices supported by generic pmbus driverGuenter Roeck1-2/+2
MAX20796 is a dual-phase scalable integrated voltage regulator with PMBus interface. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-24hwmon: (pmbus/ucd9000) Add support for UCD90320 Power SequencerJim Wright1-3/+3
Add support for the UCD90320 chip and its expanded set of GPIO pins. Signed-off-by: Jim Wright <wrightj@linux.vnet.ibm.com> Link: https://lore.kernel.org/r/20191205232411.21492-3-wrightj@linux.vnet.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-11-07hwmon: (pmbus) add driver for BEL PFE1100 and PFE3000Tao Ren1-0/+9
Add "bel-pfe" pmbus driver to support hardware monitoring for BEL PFE1100 and PFE3000 power supplies. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Link: https://lore.kernel.org/r/20191029182054.32279-2-rentao.bupt@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-09-03hwmon: pmbus: Add Inspur Power System power supply driverJohn Wang1-0/+9
Add the driver to monitor Inspur Power System power supplies with hwmon over pmbus. This driver adds sysfs attributes for additional power supply data, including vendor, model, part_number, serial number, firmware revision, hardware revision, and psu mode(active/standby). Signed-off-by: John Wang <wangzqbj@inspur.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20190819091509.29276-1-wangzqbj@inspur.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-06-24hwmon: (pmbus) Add Infineon IRPS5401 driverRobert Hancock1-0/+9
Add a driver to support the Infineon IRPS5401 PMIC. This chip has 5 pages corresponding to 4 switching outputs and one linear (LDO) output. The switching and LDO outputs have slightly different supported parameters. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-06-24hwmon: (pmbus) Add Infineon PXE1610 VR driverVijay Khemka1-0/+9
Added pmbus driver for the new device Infineon pxe1610 voltage regulator. It also supports similar family device PXE1110 and PXM1310. Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16hwmon: (pmbus/isl68137) Add driver for Intersil ISL68137 PWM ControllerMaxim Sloyko1-0/+9
Intersil ISL68137 is a digital output 7-phase configurable PWM controller with an AVSBus interface. Signed-off-by: Maxim Sloyko <maxims@google.com> Signed-off-by: Robert Lippert <rlippert@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-16hwmon: (pmbus/ir38064) Add driver for Infineon IR38064 Voltage RegulatorMaxim Sloyko1-0/+9
Add the pmbus driver for the Infineon ir38064 voltage regulator. VOUT_MODE is not supported by the device. The driver fakes linear16 mode with exponent value -8. The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however this driver does not enable them. Signed-off-by: Maxim Sloyko <maxims@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-10-12hwmon: (pmbus) remove redundant 'default n' from KconfigBartlomiej Zolnierkiewicz1-15/+0
'default n' is the default value for any bool or tristate Kconfig setting so there is no need to write it explicitly. Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols") the Kconfig behavior is the same regardless of 'default n' being present or not: ... One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. ... Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-10-11drivers: hwmon: (pmbus/ltc2978) Add support for LTM4686 uModuleMichael Hennerich1-1/+2
This patch adds support for LTM4686 Ultrathin Dual 10A or Single 20A uModule Regulator with Digital Power System Management. Datasheet: http://www.analog.com/ltm4686 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-07-09hwmon: (pmbus/max34440) Add support for MAX34451.Kun Yi1-1/+1
MAX34451 is a 16-Channel Voltage/Current Monitor and 12-Channel Sequencer. Signed-off-by: Kun Yi <kunyi@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-22hwmon: (pmbus/adm1275) Add support for ADM1272Guenter Roeck1-2/+2
The chip is quite similar to other chips in the series, but as usual it comes with its own quirks. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-12hwmon: (pmbus/ibm-cffps) Add dependency on LEDS_CLASSArnd Bergmann1-0/+1
Building without CONFIG_LEDS_CLASS causes a link failure: drivers/hwmon/pmbus/ibm-cffps.o: In function `ibm_cffps_probe': ibm-cffps.c:(.text+0x4f4): undefined reference to `devm_of_led_classdev_register' This adds the required dependency. Fixes: ef9e1cdf419a ("hwmon: (pmbus/cffps) Add led class device ...") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-11-05pmbus: Add driver for Maxim MAX31785 Intelligent Fan ControllerAndrew Jeffery1-0/+10
The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan management with temperature and remote voltage sensing. It supports various fan control features, including PWM frequency control, temperature hysteresis, dual tachometer measurements, and fan health monitoring. This patch presents a basic driver using only the existing features of the PMBus subsystem. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> [groeck: Modified description to clarify that fan control is not yet provided] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-08-31hwmon: (pmbus) Add support for Texas Instruments tps53679 deviceVadim Pasternak1-0/+9
The below lists of VOUT_MODE command readout with their related VID protocols, Digital to Analog Converter steps, supported by the device: VR12.0 mode, 5-mV DAC - 0x21 VR12.5 mode, 10-mV DAC - 0x22 VR13.0 mode, 10-mV DAC - 0x24 IMVP8 mode, 5-mV DAC - 0x25 VR13.0 mode, 5-mV DAC - 0x27 Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-08-30hwmon: (pmbus) Add IBM Common Form Factor (CFF) power supply driverEdward A. James1-0/+9
Add the driver to monitor IBM CFF power supplies with hwmon over pmbus. Signed-off-by: Edward A. James <eajames@us.ibm.com> [groeck: drop 'default n'; include bitops.h instead of jiffies.h] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-12hwmon: (pmbus) Add client driver for IR35221Samuel Mendoza-Jonas1-0/+10
IR35221 is a Digital DC-DC Multiphase Converter Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> [groeck: Preserve alphabetic order in Kconfig; add missing break statements (from Dan Carpenter); add missing error checks] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-09-09hwmon: (ucd9000) Add support for UCD90160 Power Supply SequencerMatt Weber1-3/+3
The UCD90160 Power Supply Sequencer reuses the existing register layout, so just an id addition was required. Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Ronak Desai <ronak.desai@rockwellcollins.com> [groeck: Updated description, ordered alphabetically, added documentation] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-03-05hwmon: (adm1275) Add support for ADM1278Guenter Roeck1-2/+2
ADM1278 is mostly compatible to other chips of the same series. Besides the usual difference in coefficients, it supports a temperature sensor, and it can measure both input and output voltage at the same time. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-12-18hwmon: (pmbus) Add client driver for LTC3815Guenter Roeck1-0/+10
LTC3815 is a Monolithic Synchronous DC/DC Step-Down Converter. Cc: Michael Jones <mike@proclivis.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-08-19hwmon: (ltc2978) Add support for LTM4675Guenter Roeck1-1/+1
LTM2975 is a dual 9A or single 18A μModule regulator. It is register compatible with LTM4676. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-08-18hwmon: (ltc2978) Add support for LTC3886Guenter Roeck1-1/+1
LTC3886 is a is a dual PolyPhase DC/DC synchronous step-down switching regulator controller. It is mostly command compatible to LTC3883, but supports two phases instead of one. Suggested-by: Michael Jones <mike@proclivis.com> Tested-by: Michael Jones <mike@proclivis.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-04 05:39:08 +0300