summaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)AuthorFilesLines
2024-06-08Merge tag 'for-linus-2024060801' of ↵Linus Torvalds12-68/+140
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Benjamin Tissoires: - fix potential read out of bounds in hid-asus (Andrew Ballance) - fix endian-conversion on little endian systems in intel-ish-hid (Arnd Bergmann) - A couple of new input event codes (Aseda Aboagye) - errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo (Christophe JAILLET), hid-logitech-dj (José Expósito) - current leakage fix while the device is in suspend on a i2c-hid laptop (Johan Hovold) - other assorted smaller fixes and device ID / quirk entry additions * tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: Ignore battery for ELAN touchscreens 2F2C and 4116 HID: i2c-hid: elan: fix reset suspend current leakage dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema input: Add support for "Do Not Disturb" input: Add event code for accessibility key hid: asus: asus_report_fixup: fix potential read out of bounds HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro HID: intel-ish-hid: fix endian-conversion HID: nintendo: Fix an error handling path in nintendo_hid_probe() HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode() HID: core: remove unnecessary WARN_ON() in implement() HID: nvidia-shield: Add missing check for input_ff_create_memless HID: intel-ish-hid: Fix build error for COMPILE_TEST
2024-06-07HID: Ignore battery for ELAN touchscreens 2F2C and 4116Louis Dalibard2-0/+6
At least ASUS Zenbook 14 (2023) and ASUS Zenbook 14 Pro (2023) are affected. The touchscreen reports a battery status of 0% and jumps to 1% when a stylus is used. The device ID was added and the battery ignore quirk was enabled for it. [jkosina@suse.com: reformatted changelog a bit] Signed-off-by: Louis Dalibard <ontake@ontake.dev> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-06-07HID: i2c-hid: elan: fix reset suspend current leakageJohan Hovold1-12/+47
The Elan eKTH5015M touch controller found on the Lenovo ThinkPad X13s shares the VCC33 supply with other peripherals that may remain powered during suspend (e.g. when enabled as wakeup sources). The reset line is also wired so that it can be left deasserted when the supply is off. This is important as it avoids holding the controller in reset for extended periods of time when it remains powered, which can lead to increased power consumption, and also avoids leaking current through the X13s reset circuitry during suspend (and after driver unbind). Use the new 'no-reset-on-power-off' devicetree property to determine when reset needs to be asserted on power down. Notably this also avoids wasting power on machine variants without a touchscreen for which the driver would otherwise exit probe with reset asserted. Fixes: bd3cba00dcc6 ("HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens") Cc: <stable@vger.kernel.org> # 6.0 Cc: Douglas Anderson <dianders@chromium.org> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240507144821.12275-5-johan+linaro@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-06-07input: Add support for "Do Not Disturb"Aseda Aboagye2-0/+9
HUTRR94 added support for a new usage titled "System Do Not Disturb" which toggles a system-wide Do Not Disturb setting. This commit simply adds a new event code for the usage. Signed-off-by: Aseda Aboagye <aaboagye@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/Zl-gUHE70s7wCAoB@google.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-06-07input: Add event code for accessibility keyAseda Aboagye2-0/+2
HUTRR116 added support for a new usage titled "System Accessibility Binding" which toggles a system-wide bound accessibility UI or command. This commit simply adds a new event code for the usage. Signed-off-by: Aseda Aboagye <aaboagye@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/Zl-e97O9nvudco5z@google.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-06-07hid: asus: asus_report_fixup: fix potential read out of boundsAndrew Ballance1-2/+2
syzbot reported a potential read out of bounds in asus_report_fixup. this patch adds checks so that a read out of bounds will not occur Signed-off-by: Andrew Ballance <andrewjballance@gmail.com> Reported-by: <syzbot+07762f019fd03d01f04c@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=07762f019fd03d01f04c Fixes: 59d2f5b7392e ("HID: asus: fix more n-key report descriptors if n-key quirked") Link: https://lore.kernel.org/r/20240602085023.1720492-1-andrewjballance@gmail.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-06-04HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macroJeff Johnson1-0/+1
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-logitech-hidpp.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-06-04HID: intel-ish-hid: fix endian-conversionArnd Bergmann2-45/+57
The newly added file causes a ton of sparse warnings about the incorrect use of __le32 and similar types: drivers/hid/intel-ish-hid/ishtp/loader.h:41:23: error: invalid bitfield specifier for type restricted __le32. drivers/hid/intel-ish-hid/ishtp/loader.h:42:27: error: invalid bitfield specifier for type restricted __le32. drivers/hid/intel-ish-hid/ishtp/loader.h:43:24: error: invalid bitfield specifier for type restricted __le32. drivers/hid/intel-ish-hid/ishtp/loader.h:44:24: error: invalid bitfield specifier for type restricted __le32. drivers/hid/intel-ish-hid/ishtp/loader.h:45:22: error: invalid bitfield specifier for type restricted __le32. drivers/hid/intel-ish-hid/ishtp/loader.c:172:33: warning: restricted __le32 degrades to integer drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: warning: incorrect type in assignment (different base types) drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: expected restricted __le32 [usertype] length drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: got unsigned long drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: warning: incorrect type in assignment (different base types) drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: expected restricted __le32 [usertype] fw_off drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: got unsigned int [usertype] offset drivers/hid/intel-ish-hid/ishtp/loader.c:180:17: warning: cast from restricted __le32 drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: warning: invalid assignment: += drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: left side has type unsigned int drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: right side has type restricted __le32 Add the necessary conversions and use temporary variables where appropriate to avoid converting back. Fixes: 579a267e4617 ("HID: intel-ish-hid: Implement loading firmware from host feature") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Zhang Lixu <lixu.zhang@intel.com> Tested-by: Zhang Lixu <lixu.zhang@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-06-04HID: nintendo: Fix an error handling path in nintendo_hid_probe()Christophe JAILLET1-2/+4
joycon_leds_create() has a ida_alloc() call. So if an error occurs after it, a corresponding ida_free() call is needed, as already done in the .remove function. This is not 100% perfect, because if ida_alloc() fails, then 'ctlr->player_id' will forced to be U32_MAX, and an error will be logged when ida_free() is called. Considering that this can't happen in real life, no special handling is done to handle it. Fixes: 5307de63d71d ("HID: nintendo: use ida for LED player id") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Silvan Jegen <s.jegen@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-06-04HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()José Expósito1-1/+3
Fix a memory leak on logi_dj_recv_send_report() error path. Fixes: 6f20d3261265 ("HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-06-04HID: core: remove unnecessary WARN_ON() in implement()Nikita Zhandarovich1-1/+0
Syzkaller hit a warning [1] in a call to implement() when trying to write a value into a field of smaller size in an output report. Since implement() already has a warn message printed out with the help of hid_warn() and value in question gets trimmed with: ... value &= m; ... WARN_ON may be considered superfluous. Remove it to suppress future syzkaller triggers. [1] WARNING: CPU: 0 PID: 5084 at drivers/hid/hid-core.c:1451 implement drivers/hid/hid-core.c:1451 [inline] WARNING: CPU: 0 PID: 5084 at drivers/hid/hid-core.c:1451 hid_output_report+0x548/0x760 drivers/hid/hid-core.c:1863 Modules linked in: CPU: 0 PID: 5084 Comm: syz-executor424 Not tainted 6.9.0-rc7-syzkaller-00183-gcf87f46fd34d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 RIP: 0010:implement drivers/hid/hid-core.c:1451 [inline] RIP: 0010:hid_output_report+0x548/0x760 drivers/hid/hid-core.c:1863 ... Call Trace: <TASK> __usbhid_submit_report drivers/hid/usbhid/hid-core.c:591 [inline] usbhid_submit_report+0x43d/0x9e0 drivers/hid/usbhid/hid-core.c:636 hiddev_ioctl+0x138b/0x1f00 drivers/hid/usbhid/hiddev.c:726 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Fixes: 95d1c8951e5b ("HID: simplify implement() a bit") Reported-by: <syzbot+5186630949e3c55f0799@syzkaller.appspotmail.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-05-23HID: nvidia-shield: Add missing check for input_ff_create_memlessChen Ni1-1/+3
Add check for the return value of input_ff_create_memless() and return the error if it fails in order to catch the error. Fixes: 09308562d4af ("HID: nvidia-shield: Initial driver implementation with Thunderstrike support") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-05-23HID: intel-ish-hid: Fix build error for COMPILE_TESTZhang Lixu1-4/+6
kernel test robot reported build error due to a pointer type mismatch: .../ishtp/loader.c:172:8: error: incompatible pointer types passing '__le64 *' (aka 'unsigned long long *') to parameter of type 'dma_addr_t *' (aka 'unsigned int *') The issue arises because the driver, which is primarily intended for x86-64, is also built for i386 when COMPILE_TEST is enabled. Resolve type mismatch by using a temporary dma_addr_t variable to hold the DMA address. Populate this temporary variable in dma_alloc_coherent() function, and then convert and store the address in the fragment->fragment_tbl[i].ddr_adrs field in the correct format. Similarly, convert the ddr_adrs field back to dma_addr_t when freeing the DMA buffer with dma_free_coherent(). Fixes: 579a267e4617 ("HID: intel-ish-hid: Implement loading firmware from host feature") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202405201313.SAStVPrT-lkp@intel.com/ Signed-off-by: Zhang Lixu <lixu.zhang@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-05-22Merge tag 'backlight-next-6.10' of ↵Linus Torvalds4-15/+14
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Fix-ups: - FB Backlight interaction overhaul - Remove superfluous code and simplify overall - Constify various structs and struct attributes Bug Fixes: - Repair LED flickering - Fix signedness bugs" * tag 'backlight-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (42 commits) backlight: sky81452-backlight: Remove unnecessary call to of_node_get() backlight: mp3309c: Fix LEDs flickering in PWM mode backlight: otm3225a: Drop driver owner assignment backlight: lp8788: Drop support for platform data backlight: lcd: Make lcd_class constant backlight: Make backlight_class constant backlight: mp3309c: Fix signedness bug in mp3309c_parse_fwnode() const_structs.checkpatch: add lcd_ops fbdev: omap: lcd_ams_delta: Constify lcd_ops fbdev: imx: Constify lcd_ops fbdev: clps711x: Constify lcd_ops HID: picoLCD: Constify lcd_ops backlight: tdo24m: Constify lcd_ops backlight: platform_lcd: Constify lcd_ops backlight: otm3225a: Constify lcd_ops backlight: ltv350qv: Constify lcd_ops backlight: lms501kf03: Constify lcd_ops backlight: lms283gf05: Constify lcd_ops backlight: l4f00242t03: Constify lcd_ops backlight: jornada720_lcd: Constify lcd_ops ...
2024-05-18Merge tag 'kbuild-v6.10' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Avoid 'constexpr', which is a keyword in C23 - Allow 'dtbs_check' and 'dt_compatible_check' run independently of 'dt_binding_check' - Fix weak references to avoid GOT entries in position-independent code generation - Convert the last use of 'optional' property in arch/sh/Kconfig - Remove support for the 'optional' property in Kconfig - Remove support for Clang's ThinLTO caching, which does not work with the .incbin directive - Change the semantics of $(src) so it always points to the source directory, which fixes Makefile inconsistencies between upstream and downstream - Fix 'make tar-pkg' for RISC-V to produce a consistent package - Provide reasonable default coverage for objtool, sanitizers, and profilers - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc. - Remove the last use of tristate choice in drivers/rapidio/Kconfig - Various cleanups and fixes in Kconfig * tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits) kconfig: use sym_get_choice_menu() in sym_check_prop() rapidio: remove choice for enumeration kconfig: lxdialog: remove initialization with A_NORMAL kconfig: m/nconf: merge two item_add_str() calls kconfig: m/nconf: remove dead code to display value of bool choice kconfig: m/nconf: remove dead code to display children of choice members kconfig: gconf: show checkbox for choice correctly kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal Makefile: remove redundant tool coverage variables kbuild: provide reasonable defaults for tool coverage modules: Drop the .export_symbol section from the final modules kconfig: use menu_list_for_each_sym() in sym_check_choice_deps() kconfig: use sym_get_choice_menu() in conf_write_defconfig() kconfig: add sym_get_choice_menu() helper kconfig: turn defaults and additional prompt for choice members into error kconfig: turn missing prompt for choice members into error kconfig: turn conf_choice() into void function kconfig: use linked list in sym_set_changed() kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED kconfig: gconf: remove debug code ...
2024-05-14Merge branch 'for-6.10/winwing' into for-linusJiri Kosina3-0/+243
- implement full support for WinWing Orion2 (Ivan Gorinov)
2024-05-14Merge branch 'for-6.10/uclogic' into for-linusJiri Kosina1-0/+3
2024-05-14Merge branch 'for-6.10/steam' into for-linusJiri Kosina1-8/+147
- support for Deck IMU in hid-steam (Max Maisel)
2024-05-14Merge branch 'for-6.10/sony' into for-linusJiri Kosina1-5/+2
2024-05-14Merge branch 'for-6.10/playstation' into for-linusJiri Kosina1-45/+93
- fixes for better support of 3rd party playstation DS4 controllers (Max Staudt)
2024-05-14Merge branch 'for-6.10/plarform-driver-remove-new' into for-linusJiri Kosina3-11/+7
- conversion of HID device drivers from platform_driver->remove() to platform_driver->remove_new() (Uwe Kleine-König)
2024-05-14Merge branch 'for-6.10/nintendo' into for-linusJiri Kosina1-24/+33
2024-05-14Merge branch 'for-6.10/kye' into for-linusJiri Kosina1-31/+44
2024-05-14Merge branch 'for-6.10/intel-ish' into for-linusJiri Kosina9-61/+639
- Implement loading firmware from host in intel-ish driver, needed to support Lunar Lake and later (Zhang Lixu)
2024-05-14Merge branch 'for-6.10/i2c-hid' into for-linusJiri Kosina1-17/+27
- PM fixes for STM and Weida Tech devices (Kenny Levinsen)
2024-05-14Merge branch 'for-6.10/hid-sysfs-emit' into for-linusJiri Kosina10-45/+39
- conversion from sprintf() to sysfs_emit() (Li Zhijian)
2024-05-14Merge branch 'for-6.10/hid-debug' into for-linusJiri Kosina1-442/+2995
- support for missing mappings and codes from HUT 1.5 in hid-debug (Thomas Kuehne)
2024-05-14Merge branch 'for-6.10/hid-bpf' into for-linusJiri Kosina14-71/+1934
- updates to HID-BPF infrastructure, with some of the specific fixes (e.g. rdesc fixups) abstracted into separate BPF programs for consumption by libevdev/udev-hid-bpf (Benjamin Tissoires)
2024-05-14Merge branch 'for-6.10/asus' into for-linusJiri Kosina2-80/+54
- initial support for ROG Ally and ROG X13 devices (Luke D. Jones) - other small assorted cleanups of hid-asus driver (Luke D. Jones)
2024-05-14Merge branch 'for-6.10/amd-sfh' into for-linusJiri Kosina3-8/+16
- PM fix and assorted other code cleanups for amd-sfh (Basavaraj Natikar)
2024-05-10Merge branches 'ib-backlight-auxdisplay-staging-omap-6.9', ↵Lee Jones4-15/+14
'ib-backlight-auxdisplay-hid-fb-6.9' and 'ib-backlight-hid-fbdev-lcd-scripts-6.10' into ibs-for-backlight-merged
2024-05-09kbuild: use $(src) instead of $(srctree)/$(src) for source directoryMasahiro Yamada2-2/+2
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for checked-in source files. It is merely a convention without any functional difference. In fact, $(obj) and $(src) are exactly the same, as defined in scripts/Makefile.build: src := $(obj) When the kernel is built in a separate output directory, $(src) does not accurately reflect the source directory location. While Kbuild resolves this discrepancy by specifying VPATH=$(srctree) to search for source files, it does not cover all cases. For example, when adding a header search path for local headers, -I$(srctree)/$(src) is typically passed to the compiler. This introduces inconsistency between upstream and downstream Makefiles because $(src) is used instead of $(srctree)/$(src) for the latter. To address this inconsistency, this commit changes the semantics of $(src) so that it always points to the directory in the source tree. Going forward, the variables used in Makefiles will have the following meanings: $(obj) - directory in the object tree $(src) - directory in the source tree (changed by this commit) $(objtree) - the top of the kernel object tree $(srctree) - the top of the kernel source tree Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced with $(src). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2024-05-07HID: bpf: add in-tree HID-BPF fix for the Raptor Mach 2Benjamin Tissoires1-0/+185
This device is already fixed by "HID: do not assume HAT Switch logical max < 8", but for people without the fix already, having the HID-BPF locally can fix the device while they wait for their distribution to update. Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-9-a8bf16033ef8@kernel.org Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-05-07HID: bpf: add in-tree HID-BPF fix for the Huion Kamvas Pro 19Benjamin Tissoires1-0/+290
This tablets gets a lot of things wrong: - the secondary button is reported through Secondary Tip Switch - the third button is reported through Invert Fortunately, before entering eraser mode, (so Invert = 1), the tablet always sends an out-of-proximity event. So we can detect that single event and: - if there was none but the invert bit was toggled: this is the third button - if there was this out-of-proximity event, we are entering eraser mode, and we will until the next out-of-proximity. Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-8-a8bf16033ef8@kernel.org Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-05-07HID: bpf: add in-tree HID-BPF fix for the XBox Elite 2 over BluetoothBenjamin Tissoires1-0/+133
When using the XBox Wireless Controller Elite 2 over Bluetooth, the device exports the paddle on the back of the device as a single bitfield value of usage "Assign Selection". The kernel doesn't process those usages properly and report KEY_UNKNOWN for it. SDL doesn't know how to interprete that KEY_UNKNOWN and thus ignores the paddles. Given that over USB the kernel uses BTN_TRIGGER_HAPPY[5-8], we can tweak the report descriptor to make the kernel interprete it properly: - we need an application collection of gamepad (so we have to close the current Consumer Control one) - we need to change the usage to be buttons from 0x15 to 0x18 Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-7-a8bf16033ef8@kernel.org Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-05-07HID: bpf: add in-tree HID-BPF fix for the Wacom ArtPenBenjamin Tissoires1-0/+173
This pen is compatible with multiple Wacom tablets, but we only add support for the Intuos Pro 2 M, as this is the one our user reported the bug against. We can not generically add all compatible Wacom tablets as we are writing the offsets by hand. The point of this HID-BPF program is to work around a firmware limitation where the pressure is repeated every other report. Given that we know this will happen, we can change the first new pressure information with the mean compared to the previous one. This way we smooth the incoming pressure without losing information. Cc: Ping Cheng <pinglinux@gmail.com> Cc: Jason Gerecke <killertofu@gmail.com> Cc: Aaron Armstrong Skomra <skomra@gmail.com> Cc: Joshua Dickens <Joshua@joshua-dickens.com> Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-6-a8bf16033ef8@kernel.org Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-05-07HID: bpf: add in-tree HID-BPF fix for the IOGear Kaliber Gaming MMOmentum mouseBenjamin Tissoires1-0/+59
Allows to export more than 5 buttons on this 12 buttons mouse. Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-5-a8bf16033ef8@kernel.org Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-05-07HID: bpf: add in-tree HID-BPF fix for the HP Elite Presenter MouseBenjamin Tissoires1-0/+58
Duplicate of commit 0db117359e47 ("HID: add quirk for 03f0:464a HP Elite Presenter Mouse"), but in a slightly better way. This time we actually change the application collection, making clearer for userspace what the second mouse is. Note that having both hid-quirks fix and this HID-BPF fix is not a problem at all. Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-4-a8bf16033ef8@kernel.org Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-05-07HID: bpf: add in-tree HID-BPF fix for the XPPen Artist 16Benjamin Tissoires1-0/+274
Same problem than the Artist 24: the second button on the pen is treated like an eraser. But the problem is even worse this time. There is an actual eraser at the tail of the pen. The compensation of the coordinates was done by Martin Signed-off-by: Martin Sivak <mars@montik.net> Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-3-a8bf16033ef8@kernel.org Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-05-07HID: bpf: add first in-tree HID-BPF fix for the XPPen Artist 24Benjamin Tissoires5-0/+605
This commit adds a fix for XPPen Artist 24 where the second button on the pen is used as an eraser. It's a "feature" from Microsoft, but it turns out that it's actually painful for artists. So we ship here a HID-BPF program that turns this second button into an actual button. Note that the HID-BPF program is not directly loaded by the kernel itself but by udev-hid-bpf[0]. But having the sources here allows us to also integrate tests into tools/testing/selftests/hid to ensure the HID-BPF program are actually tested. [0] https://gitlab.freedesktop.org/libevdev/udev-hid-bpf Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-2-a8bf16033ef8@kernel.org Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-05-07HID: amd_sfh: Use amd_get_c2p_val() to read C2P registerBasavaraj Natikar1-1/+1
Newer processors support various MP2 register sets. Therefore, to ensure compatibility and obtain C2P data, use the amd_get_c2p_val(). Co-developed-by: Patil Rajesh Reddy <patreddy@amd.com> Signed-off-by: Patil Rajesh Reddy <patreddy@amd.com> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-05-07HID: amd_sfh: Handle "no sensors" in PM operationsBasavaraj Natikar1-0/+10
Resume or suspend each sensor device based on the num_hid_devices. Therefore, add a check to handle the special case where no sensors are present. Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality") Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-05-07HID: amd_sfh: Modify and log error only if case of functionality failuresBasavaraj Natikar2-7/+5
Modify log messages, but only log errors when sensors are missing or a true failure occurs to avoid misleading "failed" messages. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-05-07HID: kye: Change Device Usage from Puck to MouseDavid Yang1-31/+44
Change device type because a. it is exactly a mouse, with left/right buttons and scroll wheel; b. it does not have visible marks or crosshairs, thus does not provide higher accuracy than stylus. Signed-off-by: David Yang <mmyangfl@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-05-07HID: i2c-hid: Remove unused label in i2c_hid_set_powerKenny Levinsen1-2/+0
This label was left behind when the wake-up logic was moved from i2c_hid_set_power to i2c_hid_probe_address. Clean it up as it causes warnings-as-errors builds to fail. Fixes: bb1033c8a3ea ("HID: i2c-hid: Use address probe to wake on resume") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Kenny Levinsen <kl@kl.wtf> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-05-07HID: intel-ish-hid: ipc: Add check for pci_alloc_irq_vectorsChen Ni1-0/+5
Add a check for the return value of pci_alloc_irq_vectors() and return error if it fails. [jkosina@suse.com: reworded changelog based on Srinivas' suggestion] Fixes: 74fbc7d371d9 ("HID: intel-ish-hid: add MSI interrupt support") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-05-07HID: intel-ish-hid: handler multiple MNG_RESET_NOTIFY messagesZhang Lixu1-3/+4
This patch enhances the firmware reset handler in the Intel Integrated Sensor Hub (ISH) driver. Previously, the ISH firmware would send a MNG_RESET_NOTIFY message in response to an empty IPC message from the ish_wakeup function. With the introduction of the feature to load ISH firmware from the host on the LunarLake platform, the ISH bootloader now involves the IPC function. This results in an additional MNG_RESET_NOTIFY message being sent by ISH bootloader after power on. Consequently, the driver receives two MNG_RESET_NOTIFY messages during system boot up. This can disrupt the dev->dev_state during the first reset flow due to the subsequent reset notify message. To address this, the patch modifies the fw_reset_work_fn function to skip the execution of ishtp_reset_compl_handler during the first reset flow if a reset is pending. The ishtp_reset_compl_handler will then be executed during the second reset flow, ensuring the dev->dev_state is not disrupted. Signed-off-by: Zhang Lixu <lixu.zhang@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-05-07HID: intel-ish-hid: Implement loading firmware from host featureZhang Lixu6-0/+542
Starting from the Lunar Lake generation, the ISH firmware has been divided into two components for better space optimization and increased flexibility. These components include a bootloader that is integrated into the BIOS, and a main firmware that is stored within the operating system's file system. Introduce support for loading ISH main firmware from host. This feature is applicable for Lunar Lake and later generation. Current intel-ishtp-loader, is designed for Chrome OS based systems which uses core boot and has different firmware loading method. For non chrome systems the ISH firmware loading uses different method. Key differences include: 1. The new method utilizes ISHTP capability/fixed client to enumerate the firmware loader function. It does not require a connection or flow control, unlike the method used in Chrome OS, which is enumerated as an ISHTP dynamic client driver, necessitating connect/disconnect operations and flow control. 2. The new method employs a table to describe firmware fragments, which are sent to ISH in a single operation. Conversely, the Chrome OS method sends firmware fragments in multiple operations within a loop, sending only one fragment at a time. Additionally, address potential error scenarios to ensure graceful failure handling. - Firmware Not Found: Triggers if request_firmware() fails, leaving ISH in a waiting state. Recovery: Re-insmod the ISH drivers to retry. - DMA Buffer Allocation Failure: Occurs during prepare_dma_bufs(), leading to ISH waiting state. Allocated resources are released. Recovery: Re-insmod the ISH drivers to retry. - Incorrect Firmware Image: Causes ISH to refuse loading after three failed attempts. Recovery: A platform reset is required. Please refer to the [Documentation](Documentation/hid/intel-ish-hid.rst) for the details on flows. Signed-off-by: Zhang Lixu <lixu.zhang@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-05-07HID: intel-ish-hid: Add driver_data for specifying the firmware filenameZhang Lixu2-1/+34
Introduces a new structure, ishtp_driver_data, to hold driver-specific data, including the firmware filename for different hardware variants of the Intel Integrated Sensor Hub (ISH). Signed-off-by: Zhang Lixu <lixu.zhang@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-05-07HID: playstation: DS4: Fix calibration workaround for clone devicesMax Staudt1-24/+28
The logic in dualshock4_get_calibration_data() used uninitialised data in case of a failed kzalloc() for the transfer buffer. The solution is to group all business logic and all sanity checks together, and jump only to the latter in case of an error. While we're at it, factor out the axes' labelling, since it must happen either way for input_report_abs() to succeed later on. Thanks to Dan Carpenter for the Smatch static checker warning. Fixes: a48a7cd85f55 ("HID: playstation: DS4: Don't fail on calibration data request") Signed-off-by: Max Staudt <max@enpas.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>