summaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)AuthorFilesLines
2020-02-27Merge branch 'for-linus' of ↵Linus Torvalds8-35/+63
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID subsystem fixes from Jiri Kosina: - syzkaller-reported error handling fixes in various drivers, from various people - increase of HID report buffer size to 8K, which is apparently needed by certain modern devices - a few new device-ID-specific fixes / quirks - battery charging status reporting fix in logitech-hidpp, from Filipe Laíns * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: hid-bigbenff: fix race condition for scheduled work during removal HID: hid-bigbenff: call hid_hw_stop() in case of error HID: hid-bigbenff: fix general protection fault caused by double kfree HID: i2c-hid: add Trekstor Surfbook E11B to descriptor override HID: alps: Fix an error handling path in 'alps_input_configured()' HID: hiddev: Fix race in in hiddev_disconnect() HID: core: increase HID report buffer size to 8KiB HID: core: fix off-by-one memset in hid_report_raw_event() HID: apple: Add support for recent firmware on Magic Keyboards HID: ite: Only bind to keyboard USB interface on Acer SW5-012 keyboard dock HID: logitech-hidpp: BatteryVoltage: only read chargeStatus if extPower is active
2020-02-18HID: hid-bigbenff: fix race condition for scheduled work during removalHanno Zulla1-0/+6
It's possible that there is scheduled work left while the device is already being removed, which can cause a kernel crash. Adding a flag will avoid this. Signed-off-by: Hanno Zulla <kontakt@hanno.de> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2020-02-18HID: hid-bigbenff: call hid_hw_stop() in case of errorHanno Zulla1-5/+10
It's required to call hid_hw_stop() once hid_hw_start() was called previously, so error cases need to handle this. Also, hid_hw_close() is not necessary during removal. Signed-off-by: Hanno Zulla <kontakt@hanno.de> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2020-02-18HID: hid-bigbenff: fix general protection fault caused by double kfreeHanno Zulla1-2/+8
The struct *bigben was allocated via devm_kzalloc() and then used as a parameter in input_ff_create_memless(). This caused a double kfree during removal of the device, since both the managed resource API and ml_ff_destroy() in drivers/input/ff-memless.c would call kfree() on it. Signed-off-by: Hanno Zulla <kontakt@hanno.de> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2020-02-14HID: i2c-hid: add Trekstor Surfbook E11B to descriptor overrideKai-Heng Feng1-0/+8
The Surfbook E11B uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list. BugLink: https://bugs.launchpad.net/bugs/1858299 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2020-02-12HID: alps: Fix an error handling path in 'alps_input_configured()'Christophe JAILLET1-1/+1
They are issues: - if 'input_allocate_device()' fails and return NULL, there is no need to free anything and 'input_free_device()' call is a no-op. It can be axed. - 'ret' is known to be 0 at this point, so we must set it to a meaningful value before returning Fixes: 2562756dde55 ("HID: add Alps I2C HID Touchpad-Stick support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-02-12HID: hiddev: Fix race in in hiddev_disconnect()dan.carpenter@oracle.com1-1/+1
Syzbot reports that "hiddev" is used after it's free in hiddev_disconnect(). The hiddev_disconnect() function sets "hiddev->exist = 0;" so hiddev_release() can free it as soon as we drop the "existancelock" lock. This patch moves the mutex_unlock(&hiddev->existancelock) until after we have finished using it. Reported-by: syzbot+784ccb935f9900cc7c9e@syzkaller.appspotmail.com Fixes: 7f77897ef2b6 ("HID: hiddev: fix potential use-after-free") Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-02-12HID: core: fix off-by-one memset in hid_report_raw_event()Johan Korsnes1-1/+3
In case a report is greater than HID_MAX_BUFFER_SIZE, it is truncated, but the report-number byte is not correctly handled. This results in a off-by-one in the following memset, causing a kernel Oops and ensuing system crash. Note: With commit 8ec321e96e05 ("HID: Fix slab-out-of-bounds read in hid_field_extract") I no longer hit the kernel Oops as we instead fail "controlled" at probe if there is a report too long in the HID report-descriptor. hid_report_raw_event() is an exported symbol, so presumabely we cannot always rely on this being the case. Fixes: 966922f26c7f ("HID: fix a crash in hid_report_raw_event() function.") Signed-off-by: Johan Korsnes <jkorsnes@cisco.com> Cc: Armando Visconti <armando.visconti@st.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-02-12HID: apple: Add support for recent firmware on Magic KeyboardsMansour Behabadi1-1/+2
Magic Keyboards with more recent firmware (0x0100) report Fn key differently. Without this patch, Fn key may not behave as expected and may not be configurable via hid_apple fnmode module parameter. Signed-off-by: Mansour Behabadi <mansour@oxplot.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-02-03HID: ite: Only bind to keyboard USB interface on Acer SW5-012 keyboard dockHans de Goede1-2/+3
Commit 8f18eca9ebc5 ("HID: ite: Add USB id match for Acer SW5-012 keyboard dock") added the USB id for the Acer SW5-012's keyboard dock to the hid-ite driver to fix the rfkill driver not working. Most keyboard docks with an ITE 8595 keyboard/touchpad controller have the "Wireless Radio Control" bits which need the special hid-ite driver on the second USB interface (the mouse interface) and their touchpad only supports mouse emulation, so using generic hid-input handling for anything but the "Wireless Radio Control" bits is fine. On these devices we simply bind to all USB interfaces. But unlike other ITE8595 using keyboard docks, the Acer Aspire Switch 10 (SW5-012)'s touchpad not only does mouse emulation it also supports HID-multitouch and all the keys including the "Wireless Radio Control" bits have been moved to the first USB interface (the keyboard intf). So we need hid-ite to handle the first (keyboard) USB interface and have it NOT bind to the second (mouse) USB interface so that that can be handled by hid-multitouch.c and we get proper multi-touch support. This commit changes the hid_device_id for the SW5-012 keyboard dock to only match on hid devices from the HID_GROUP_GENERIC group, this way hid-ite will not bind the the mouse/multi-touch interface which has HID_GROUP_MULTITOUCH_WIN_8 as group. This fixes the regression to mouse-emulation mode introduced by adding the keyboard dock USB id. Cc: stable@vger.kernel.org Fixes: 8f18eca9ebc5 ("HID: ite: Add USB id match for Acer SW5-012 keyboard dock") Reported-by: Zdeněk Rampas <zdenda.rampas@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2020-01-30Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-2/+1
Pull drm updates from Davbe Airlie: "This is the main pull request for graphics for 5.6. Usual selection of changes all over. I've got one outstanding vmwgfx pull that touches mm so kept it separate until after all of this lands. I'll try and get it to you soon after this, but it might be early next week (nothing wrong with code, just my schedule is messy) This also hits a lot of fbdev drivers with some cleanups. Other notables: - vulkan timeline semaphore support added to syncobjs - nouveau turing secureboot/graphics support - Displayport MST display stream compression support Detailed summary: uapi: - dma-buf heaps added (and fixed) - command line add support for panel oreientation - command line allow overriding penguin count drm: - mipi dsi definition updates - lockdep annotations for dma_resv - remove dma-buf kmap/kunmap support - constify fb_ops in all fbdev drivers - MST fix for daisy chained hotplug- - CTA-861-G modes with VIC >= 193 added - fix drm_panel_of_backlight export - LVDS decoder support - more device based logging support - scanline alighment for dumb buffers - MST DSC helpers scheduler: - documentation fixes - job distribution improvements panel: - Logic PD type 28 panel support - Jimax8729d MIPI-DSI - igenic JZ4770 - generic DSI devicetree bindings - sony acx424AKP panel - Leadtek LTK500HD1829 - xinpeng XPP055C272 - AUO B116XAK01 - GiantPlus GPM940B0 - BOE NV140FHM-N49 - Satoz SAT050AT40H12R2 - Sharp LS020B1DD01D panels. ttm: - use blocking WW lock i915: - hw/uapi state separation - Lock annotation improvements - selftest improvements - ICL/TGL DSI VDSC support - VBT parsing improvments - Display refactoring - DSI updates + fixes - HDCP 2.2 for CFL - CML PCI ID fixes - GLK+ fbc fix - PSR fixes - GEN/GT refactor improvments - DP MST fixes - switch context id alloc to xarray - workaround updates - LMEM debugfs support - tiled monitor fixes - ICL+ clock gating programming removed - DP MST disable sequence fixed - LMEM discontiguous object maps - prefaulting for discontiguous objects - use LMEM for dumb buffers if possible - add LMEM mmap support amdgpu: - enable sync object timelines for vulkan - MST atomic routines - enable MST DSC support - add DMCUB display microengine support - DC OEM i2c support - Renoir DC fixes - Initial HDCP 2.x support - BACO support for Arcturus - Use BACO for runtime PM power save - gfxoff on navi10 - gfx10 golden updates and fixes - DCN support on POWER - GFXOFF for raven1 refresh - MM engine idle handlers cleanup - 10bpc EDP panel fixes - renoir watermark fixes - SR-IOV fixes - Arcturus VCN fixes - GDDR6 training fixes - freesync fixes - Pollock support amdkfd: - unify more codepath with amdgpu - use KIQ to setup HIQ rather than MMIO radeon: - fix vma fault handler race - PPC DMA fix - register check fixes for r100/r200 nouveau: - mmap_sem vs dma_resv fix - rewrite the ACR secure boot code for Turing - TU10x graphics engine support (TU11x pending) - Page kind mapping for turing - 10-bit LUT support - GP10B Tegra fixes - HD audio regression fix hisilicon/hibmc: - use generic fbdev code and helpers rockchip: - dsi/px30 support virtio: - fb damage support - static some functions vc4: - use dma_resv lock wrappers msm: - use dma_resv lock wrappers - sc7180 display + DSI support - a618 support - UBWC support improvements vmwgfx: - updates + new logging uapi exynos: - enable/disable callback cleanups etnaviv: - use dma_resv lock wrappers atmel-hlcdc: - clock fixes mediatek: - cmdq support - non-smooth cursor fixes - ctm property support sun4i: - suspend support - A64 mipi dsi support rcar-du: - Color management module support - LVDS encoder dual-link support - R8A77980 support analogic: - add support for an6345 ast: - atomic modeset support - primary plane garbage fix arcgpu: - fixes for fourcc handling tegra: - minor fixes and improvments mcde: - vblank support meson: - OSD1 plane AFBC commit gma500: - add pageflip support - reomve global drm_dev komeda: - tweak debugfs output - d32 support - runtime PM suppotr udl: - use generic shmem helpers - cleanup and fixes" * tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits) drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing drm/nouveau/acr: return error when registering LSF if ACR not supported drm/nouveau/disp/gv100-: not all channel types support reporting error codes drm/nouveau/disp/nv50-: prevent oops when no channel method map provided drm/nouveau: support synchronous pushbuf submission drm/nouveau: signal pending fences when channel has been killed drm/nouveau: reject attempts to submit to dead channels drm/nouveau: zero vma pointer even if we only unreference it rather than free drm/nouveau: Add HD-audio component notifier support drm/nouveau: fix build error without CONFIG_IOMMU_API drm/nouveau/kms/nv04: remove set but not used variable 'width' drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector' drm/nouveau/mmu: fix comptag memory leak drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping drm/exynos: Rename Exynos to lowercase drm/exynos: change callback names drm/mst: Don't do atomic checks over disabled managers drm/amdgpu: add the lost mutex_init back drm/amd/display: skip opp blank or unblank if test pattern enabled ...
2020-01-28HID: logitech-hidpp: BatteryVoltage: only read chargeStatus if extPower is ↵Filipe Laíns1-22/+21
active In the HID++ 2.0 function getBatteryInfo() from the BatteryVoltage (0x1001) feature, chargeStatus is only valid if extPower is active. Previously we were ignoring extPower, which resulted in wrong values. Example: With an unplugged mouse $ cat /sys/class/power_supply/hidpp_battery_0/status Charging This patch fixes that, it also renames charge_sts to flags as charge_sts can be confused with chargeStatus from the spec. Spec: +--------+-------------------------------------------------------------------------+ | byte | 2 | +--------+--------------+------------+------------+----------+----------+----------+ | bit | 0..2 | 3 | 4 | 5 | 6 | 7 | +--------+--------------+------------+------------+----------+----------+----------+ | buffer | chargeStatus | fastCharge | slowCharge | critical | (unused) | extPower | +--------+--------------+------------+------------+----------+----------+----------+ Table 1 - battery voltage (0x1001), getBatteryInfo() (ASE 0), 3rd byte +-------+--------------------------------------+ | value | meaning | +-------+--------------------------------------+ | 0 | Charging | +-------+--------------------------------------+ | 1 | End of charge (100% charged) | +-------+--------------------------------------+ | 2 | Charge stopped (any "normal" reason) | +-------+--------------------------------------+ | 7 | Hardware error | +-------+--------------------------------------+ Table 2 - chargeStatus value Signed-off-by: Filipe Laíns <lains@archlinux.org> Tested-by: Pedro Vanzella <pedro@pedrovanzella.com> Reviewed-by: Pedro Vanzella <pedro@pedrovanzella.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2020-01-27Merge branch 'for-5.6/logitech' into for-linusJiri Kosina1-15/+232
- voltage support for newer Logitech HID++ devices, from Pedro Vanzella. - MX Master support improvements, from Adrian Freund and Mazin Rezk
2020-01-27Merge branch 'for-5.6/hidraw' into for-linusJiri Kosina1-0/+9
- support for uniq ioctl()
2020-01-20Backmerge v5.5-rc7 into drm-nextDave Airlie15-71/+105
msm needs 5.5-rc4, go to the latest. Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-01-13HID: logitech-hidpp: avoid duplicate error handling code in 'hidpp_probe()'Christophe JAILLET1-1/+0
'hid_hw_stop()' is already in the error handling path when branching to the 'hid_hw_open_fail' label. There is no point in calling it twice, so remove one. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-01-10HID: hidraw, uhid: Always report EPOLLOUTJiri Kosina2-5/+7
hidraw and uhid device nodes are always available for writing so we should always report EPOLLOUT and EPOLLWRNORM bits, not only in the cases when there is nothing to read. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: be54e7461ffdc ("HID: uhid: Fix returning EPOLLOUT from uhid_char_poll") Fixes: 9f3b61dc1dd7b ("HID: hidraw: Fix returning EPOLLOUT from hidraw_poll") Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-01-09HID: steam: Fix input device disappearingRodrigo Rivas Costa1-0/+4
The `connected` value for wired devices was not properly initialized, it must be set to `true` upon creation, because wired devices do not generate connection events. When a raw client (the Steam Client) uses the device, the input device is destroyed. Then, when the raw client finishes, it must be recreated. But since the `connected` variable was false this never happended. Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-12-29HID: intel-ish-hid: ipc: Add Tiger Lake PCI device IDSrinivas Pandruvada2-0/+2
Added Tiger Lake PCI device ID to the supported device list. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-12-19drivers/hid/hid-multitouch.c: fix a possible null pointer access.Pan Zhang1-1/+1
1002 if ((quirks & MT_QUIRK_IGNORE_DUPLICATES) && mt) { 1003 struct input_mt_slot *i_slot = &mt->slots[slotnum]; 1004 1005 if (input_mt_is_active(i_slot) && 1006 input_mt_is_used(mt, i_slot)) 1007 return -EAGAIN; 1008 } We previously assumed 'mt' could be null (see line 1002). The following situation is similar, so add a judgement. Signed-off-by: Pan Zhang <zhangpan26@huawei.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-12-18hid-logitech-hidpp: read battery voltage from newer devicesPedro Vanzella1-4/+168
Newer Logitech mice report their battery voltage through feature 0x1001 instead of the battery levels through feature 0x1000. When the device is brought up and we try to query the battery, figure out if it supports the old or the new feature. If it supports the new feature, record the feature index and read the battery voltage and its charge status. The device will respond with three bytes: the first two are its voltage, and the last one is a bitset, reporting if the battery is charging, fast or slow, in critical level or discharging. If everything went correctly, record the fact that we're capable of querying battery voltage. Note that the protocol only gives us the current voltage in mV. We store that as-is, but when queried, we report it in uV as expected by sysfs. Like we do for other ways of interacting with the battery for other devices, refresh the battery status and notify the power supply subsystem of the changes in voltage and status. Since there are no known devices which implement both the old and the new battery feature, we make sure to try the newer feature first and only fall back to the old one if that fails. Signed-off-by: Pedro Vanzella <pedro@pedrovanzella.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-12-18HID: logitech: Add MX Master 3 MouseAdrian Freund1-0/+5
This patch adds support for the Logitech MX Master 3 Mouse using the Logitech Unifying Receiver and Bluetooth LE. Signed-off-by: Adrian Freund <adrian@freund.io> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-12-18HID: logitech-hidpp: Support WirelessDeviceStatus connect eventsMazin Rezk1-4/+35
This patch allows hidpp_report_is_connect_event to support WirelessDeviceStatus connect events. The WirelessDeviceStatus feature index is stored in hidpp_device when probed. The connect event's fap feature_index is compared against it if the device supports it. Signed-off-by: Mazin Rezk <mnrzk@protonmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-12-18HID: logitech-hidpp: Support translations from short to long reportsMazin Rezk1-6/+24
This patch allows short reports to be translated into long reports. hidpp_validate_device now returns a u8 instead of a bool which represents the supported reports. The corresponding bits (i.e. HIDPP_REPORT_*_SUPPORTED) are set if an HID++ report is supported. If a short report is being sent and the device does not support it, it is instead sent as a long report. This patch also introduces support for the MX Master (b01e and b012). Signed-off-by: Mazin Rezk <mnrzk@protonmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-12-18HID: wacom: Recognize new MobileStudio Pro PIDJason Gerecke1-2/+4
A new PID is in use for repaired MobileStudio Pro devices. Add it to the list of devices that need special-casing in wacom_wac_pad_event. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-12-18HID: intel-ish-hid: ipc: add CMP device idEven Xu2-0/+2
Add Comet Lake H into ishtp support list. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-12-18HID: hiddev: fix mess in hiddev_open()Dmitry Torokhov1-55/+42
The open method of hiddev handler fails to bring the device out of autosuspend state as was promised in 0361a28d3f9a, as it actually has 2 blocks that try to start the transport (call hid_hw_open()) with both being guarded by the "open" counter, so the 2nd block is never executed as the first block increments the counter so it is never at 0 when we check it for the second block. Additionally hiddev_open() was leaving counter incremented on errors, causing the device to never be reopened properly if there was ever an error. Let's fix all of this by factoring out code that creates client structure and powers up the device into a separate function that is being called from usbhid_open() with the "existancelock" being held. Fixes: 0361a28d3f9a ("HID: autosuspend support for USB HID") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-12-17Merge tag 'drm-misc-next-2019-12-16' of ↵Daniel Vetter1-2/+1
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.6: UAPI Changes: - Add support for DMA-BUF HEAPS. Cross-subsystem Changes: - mipi dsi definition updates, pulled into drm-intel as well. - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim. - Remove support for dma-buf kmap/kunmap. - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well. Core Changes: - Small cleanups to ttm. - Fix SCDC definition. - Assorted cleanups to core. - Add todo to remove load/unload hooks, and use generic fbdev emulation. - Assorted documentation updates. - Use blocking ww lock in ttm fault handler. - Remove drm_fb_helper_fbdev_setup/teardown. - Warning fixes with W=1 for atomic. - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers. - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted) - Various kconfig indentation fixes in core and drivers. - Fix freeing transactions in dp-mst correctly. - Sean Paul is steping down as core maintainer. :-( - Add lockdep annotations for atomic locks vs dma-resv. - Prevent use-after-free for a bad job in drm_scheduler. - Fill out all block sizes in the P01x and P210 definitions. - Avoid division by zero in drm/rect, and fix bounds. - Add drm/rect selftests. - Add aspect ratio and alternate clocks for HDMI 4k modes. - Add todo for drm_framebuffer_funcs and fb_create cleanup. - Drop DRM_AUTH for prime import/export ioctls. - Clear DP-MST payload id tables downstream when initializating. - Fix for DSC throughput definition. - Add extra FEC definitions. - Fix fake offset in drm_gem_object_funs.mmap. - Stop using encoder->bridge in core directly - Handle bridge chaining slightly better. - Add backlight support to drm/panel, and use it in many panel drivers. - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes. Driver Changes: - Small fixes all over. - Fix documentation in vkms. - Fix mmap_sem vs dma_resv in nouveau. - Small cleanup in komeda. - Add page flip support in gma500 for psb/cdv. - Add ddc symlink in the connector sysfs directory for many drivers. - Add support for analogic an6345, and fix small bugs in it. - Add atomic modesetting support to ast. - Fix radeon fault handler VMA race. - Switch udl to use generic shmem helpers. - Unconditional vblank handling for mcde. - Miscellaneous fixes to mcde. - Tweak debug output from komeda using debugfs. - Add gamma and color transform support to komeda for DOU-IPS. - Add support for sony acx424AKP panel. - Various small cleanups to gma500. - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation. - Add support for Logic PD Type 28 panel. - Use drm_panel_* wrapper functions in exynos/tegra/msm. - Add devicetree bindings for generic DSI panels. - Don't include drm_pci.h directly in many drivers. - Add support for begin/end_cpu_access in udmabuf. - Stop using drm_get_pci_dev in gma500 and mga200. - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access. - Add devfreq thermal support to panfrost. - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager. - meson: Add support for OSD1 plane AFBC commit. - Stop displaying garbage when toggling ast primary plane on/off. - More cleanups and fixes to UDL. - Add D32 suport to komeda. - Remove globle copy of drm_dev in gma500. - Add support for Boe Himax8279d MIPI-DSI LCD panel. - Add support for ingenic JZ4770 panel. - Small null pointer deference fix in ingenic. - Remove support for the special tfp420 driver, as there is a generic way to do it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
2019-12-13HID: hid-input: clear unmapped usagesDmitry Torokhov1-4/+12
We should not be leaving half-mapped usages with potentially invalid keycodes, as that may confuse hidinput_find_key() when the key is located by index, which may end up feeding way too large keycode into the VT keyboard handler and cause OOB write there: BUG: KASAN: global-out-of-bounds in clear_bit include/asm-generic/bitops-instrumented.h:56 [inline] BUG: KASAN: global-out-of-bounds in kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline] BUG: KASAN: global-out-of-bounds in kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495 Write of size 8 at addr ffffffff89a1b2d8 by task syz-executor108/1722 ... kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline] kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495 input_to_handler+0x3b6/0x4c0 drivers/input/input.c:118 input_pass_values.part.0+0x2e3/0x720 drivers/input/input.c:145 input_pass_values drivers/input/input.c:949 [inline] input_set_keycode+0x290/0x320 drivers/input/input.c:954 evdev_handle_set_keycode_v2+0xc4/0x120 drivers/input/evdev.c:882 evdev_do_ioctl drivers/input/evdev.c:1150 [inline] Cc: stable@vger.kernel.org Reported-by: syzbot+19340dff067c2d3835c0@syzkaller.appspotmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-12-13HID: Add quirk for incorrect input length on Lenovo Y720Pavel Balan2-3/+14
Apply it to the Lenovo Y720 gaming laptop I2C peripheral then. This fixes dmesg being flooded with errors visible on un-suspend in Linux Mint 19 Cinnamon. Example of error log: <...> [ 4.326588] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4) [ 4.326845] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4) [ 4.327095] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4) [ 4.327341] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4) [ 4.327609] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4) <...> Example of fixed log (debug on) <...> [ 3731.333183] i2c_hid i2c-ITE33D1:00: input: 02 00 [ 3731.333581] i2c_hid i2c-ITE33D1:00: input: 02 00 [ 3731.333842] i2c_hid i2c-ITE33D1:00: input: 02 00 [ 3731.334107] i2c_hid i2c-ITE33D1:00: input: 02 00 [ 3731.334367] i2c_hid i2c-ITE33D1:00: input: 02 00 <...> [jkosina@suse.cz: rebase onto more recent codebase] Signed-off-by: Pavel Balan <admin@kryma.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-12-13HID: asus: Ignore Asus vendor-page usage-code 0xff eventsHans de Goede1-1/+2
At least on a T100HA an Asus vendor-page usage-code 0xff event is send on every suspend and again on resume, resulting in the following warning: asus 0003:0B05:1807.0002: Unmapped Asus vendor usagepage code 0xff being logged twice on every suspend/resume. This commit silences the "Unmapped Asus vendor usagepage code ..." warning for usage-code 0xff to avoid these warnings being logged. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-12-13HID: ite: Add USB id match for Acer SW5-012 keyboard dockHans de Goede2-0/+4
The Acer SW5-012 2-in-1 keyboard dock uses a Synaptics S91028 touchpad which is connected to an ITE 8595 USB keyboard controller chip. This keyboard has the same quirk for its rfkill / airplane mode hotkey as other keyboards with the ITE 8595 chip, it only sends a single release event when pressed and released, it never sends a press event. This commit adds this keyboards USB id to the hid-ite id-table, fixing the rfkill key not working on this keyboard. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-12-13HID: Add quirk for Xin-Mo Dual ControllerPriit Laes1-0/+1
Without the quirk, joystick shows up as single controller for both first and second player pads/pins. Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-12-11HID: hidraw: add support uniq ioctlMarcel Holtmann1-0/+9
Add support for reading out the uniq information from the underlying HID device. This might be the iSerialNumber in case of USB or the BD_ADDR in case of Bluetooth. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-12-11HID: Fix slab-out-of-bounds read in hid_field_extractAlan Stern1-0/+6
The syzbot fuzzer found a slab-out-of-bounds bug in the HID report handler. The bug was caused by a report descriptor which included a field with size 12 bits and count 4899, for a total size of 7349 bytes. The usbhid driver uses at most a single-page 4-KB buffer for reports. In the test there wasn't any problem about overflowing the buffer, since only one byte was received from the device. Rather, the bug occurred when the HID core tried to extract the data from the report fields, which caused it to try reading data beyond the end of the allocated buffer. This patch fixes the problem by rejecting any report whose total length exceeds the HID_MAX_BUFFER_SIZE limit (minus one byte to allow for a possible report index). In theory a device could have a report longer than that, but if there was such a thing we wouldn't handle it correctly anyway. Reported-and-tested-by: syzbot+09ef48aa58261464b621@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-12-09HID: picoLCD: constify fb opsJani Nikula1-2/+1
Now that the fbops member of struct fb_info is const, we can start making the ops const as well. v2: fix typo (Christophe de Dinechin) Cc: Bruno Prémont <bonbons@linux-vserver.org> Cc: linux-input@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Bruno Prémont <bonbons@linux-vserver.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f415010cd52cce7d8a1250d4eca582ec64e67956.1575390741.git.jani.nikula@intel.com
2019-12-09HID: multitouch: Add LG MELF0410 I2C touchscreen supportAaron Ma2-0/+4
Add multitouch support for LG MELF I2C touchscreen. Apply the same workaround as LG USB touchscreen. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-12-09HID: uhid: Fix returning EPOLLOUT from uhid_char_pollMarcel Holtmann1-1/+1
Always return EPOLLOUT from uhid_char_poll to allow polling /dev/uhid for writable state. Fixes: 1f9dec1e0164 ("HID: uhid: allow poll()'ing on uhid devices") Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-12-09HID: hidraw: Fix returning EPOLLOUT from hidraw_pollMarcel Holtmann1-2/+2
When polling a connected /dev/hidrawX device, it is useful to get the EPOLLOUT when writing is possible. Since writing is possible as soon as the device is connected, always return it. Right now EPOLLOUT is only returned when there are also input reports are available. This works if devices start sending reports when connected, but some HID devices might need an output report first before sending any input reports. This change will allow using EPOLLOUT here as well. Fixes: 378b80370aa1 ("hidraw: Return EPOLLOUT from hidraw_poll") Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-12-02Merge branch 'for-linus' of ↵Linus Torvalds12-66/+1084
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - Support for Logitech G15 (Hans de Goede) - HID parser improvements, improving support for some devices; e.g. Windows Precision Touchpad, products from Primax, etc. (Blaž Hrastnik, Candle Sun) - robustification of tablet mode support in google-whiskers driver (Dmitry Torokhov) - assorted small fixes, device-specific quirks and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (23 commits) HID: rmi: Check that the RMI_STARTED bit is set before unregistering the RMI transport device HID: quirks: remove hid-led devices from hid_have_special_driver HID: Improve Windows Precision Touchpad detection. HID: i2c-hid: Reset ALPS touchpads on resume HID: i2c-hid: fix no irq after reset on raydium 3118 HID: logitech-hidpp: Silence intermittent get_battery_capacity errors HID: i2c-hid: remove orphaned member sleep_delay HID: quirks: Add quirk for HP MSU1465 PIXART OEM mouse HID: core: check whether Usage Page item is after Usage ID items HID: intel-ish-hid: Spelling s/diconnect/disconnect/ HID: google: Detect base folded usage instead of hard-coding whiskers HID: logitech: Add depends on LEDS_CLASS to Logitech Kconfig entry HID: lg-g15: Add support for the G510's M1-M3 and MR LEDs HID: lg-g15: Add support for controlling the G510's RGB backlight HID: lg-g15: Add support for the G510 keyboards' gaming keys HID: lg-g15: Add support for the M1-M3 and MR LEDs HID: lg-g15: Add keyboard and LCD backlight control HID: Add driver for Logitech gaming keyboards (G15, G15 v2) Input: Add event-codes for macro keys found on various keyboards HID: hidraw: replace printk() with corresponding pr_xx() variant ...
2019-12-02Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds2-13/+2
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-12-01Merge tag 'hyperv-next-signed' of ↵Linus Torvalds1-0/+34
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V updates from Sasha Levin: - support for new VMBus protocols (Andrea Parri) - hibernation support (Dexuan Cui) - latency testing framework (Branden Bonaby) - decoupling Hyper-V page size from guest page size (Himadri Pandya) * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits) Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic drivers/hv: Replace binary semaphore with mutex drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86 HID: hyperv: Add the support of hibernation hv_balloon: Add the support of hibernation x86/hyperv: Implement hv_is_hibernation_supported() Drivers: hv: balloon: Remove dependencies on guest page size Drivers: hv: vmbus: Remove dependencies on guest page size x86: hv: Add function to allocate zeroed page for Hyper-V Drivers: hv: util: Specify ring buffer size using Hyper-V page size Drivers: hv: Specify receive buffer size using Hyper-V page size tools: hv: add vmbus testing tool drivers: hv: vmbus: Introduce latency testing video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host hv_netvsc: Add the support of hibernation hv_sock: Add the support of hibernation video: hyperv_fb: Add the support of hibernation scsi: storvsc: Add the support of hibernation Drivers: hv: vmbus: Add module parameter to cap the VMBus version ...
2019-11-29Merge branch 'for-5.5/whiskers' into for-linusJiri Kosina1-43/+103
- robustification of tablet mode support in google-whiskers driver (Dmitry Torokhov)
2019-11-29Merge branch 'for-5.5/logitech' into for-linusJiri Kosina5-0/+908
- Support for Logitech G15 (Hans de Goede) - silencing of non-informative error flow in dmesg from logitechi-hiddpp (Hans de Goede)
2019-11-29Merge branch 'for-5.5/ish' into for-linusJiri Kosina1-1/+1
- typo fix (Geert Uytterhoeven)
2019-11-29Merge branch 'for-5.5/i2c' into for-linusJiri Kosina1-2/+0
- removal of superfluous delay (You-Sheng Yang)
2019-11-29Merge branch 'for-5.5/hidraw' into for-linusJiri Kosina1-5/+5
- printk() -> pr_*() cleanup (Rishi Gupta)
2019-11-29Merge branch 'for-5.5/core' into for-linusJiri Kosina3-61/+61
- hid_have_special_driver[] cleanup for LED devices (Heiner Kallweit) - HID parser improvements (Blaž Hrastnik, Candle Sun)
2019-11-22HID: hyperv: Add the support of hibernationDexuan Cui1-0/+34
During the suspend process and resume process, if there is any mouse event, there is a small chance the suspend and the resume process can be aborted because of mousevsc_on_receive() -> pm_wakeup_hard_event(). This behavior can be avoided by disabling the Hyper-V mouse device as a wakeup source: echo disabled > /sys/bus/vmbus/drivers/hid_hyperv/XXX/power/wakeup (XXX is the device's GUID). Signed-off-by: Dexuan Cui <decui@microsoft.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-18HID: rmi: Check that the RMI_STARTED bit is set before unregistering the RMI ↵Andrew Duggan1-1/+2
transport device In the event that the RMI device is unreachable, the calls to rmi_set_mode() or rmi_set_page() will fail before registering the RMI transport device. When the device is removed, rmi_remove() will call rmi_unregister_transport_device() which will attempt to access the rmi_dev pointer which was not set. This patch adds a check of the RMI_STARTED bit before calling rmi_unregister_transport_device(). The RMI_STARTED bit is only set after rmi_register_transport_device() completes successfully. The kernel oops was reported in this message: https://www.spinics.net/lists/linux-input/msg58433.html [jkosina@suse.cz: reworded changelog as agreed with Andrew] Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reported-by: Federico Cerutti <federico@ceres-c.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-26 13:42:34 +0300