| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The DG2 forcewake table is very similar to the one used by XeHP SDV (and
both platforms are even presented as a single table in the bspec). For
the most part DG2 starts using a few additional ranges that were
'reserved' on XeHP SDV and stops using some others. However there is a
single range (0xd800-0xd87f) that needs to be handled differently
between the two platforms (it needs GT wake on XeHP SDV, but render wake
on DG2) so unless we want to wake both domains (which could waste power)
or define new types of forcewake domains for this special case we need
to have separate tables for the two platforms. Let's define the ranges
for both platforms with a parameterized macro so that we don't actually
need to duplicate everything in the code.
It should be fine for DG2 to re-use the Xe_HP shadow register list so we
can continue to use the 'xehpsdv' MMIO write functions and don't need to
spin up a separate DG2 instance.
Bspec: 66534
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-4-matthew.d.roper@intel.com
|
|
Alderlake-P have different values for MBUS DBOX A credits depending
if MBUS join is enabled or not.
BSpec: 50343
BSpec: 54369
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708211827.288601-6-jose.souza@intel.com
|
|
This feature hands over the control of HW RC6 to the GuC.
GuC decides when to put HW into RC6 based on it's internal
busyness algorithms.
GuCRC needs GuC submission to be enabled, and only
supported on Gen12+ for now.
When GuCRC is enabled, do not set HW RC6. Use a H2G message
to tell GuC to enable GuCRC. When disabling RC6, tell GuC to
revert RC6 control back to KMD. KMD is still responsible for
enabling everything related to Coarse Power Gating though.
v2: Address comments (Michal W)
v3: Don't set hysterisis values when GuCRC is used (Matt Roper)
v4: checkpatch()
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-15-vinay.belgaumkar@intel.com
|
|
Tests that exercise the SLPC get/set frequency interfaces.
Clamp_max will set max frequency to multiple levels and check
that SLPC requests frequency lower than or equal to it.
Clamp_min will set min frequency to different levels and check
if SLPC requests are higher or equal to those levels.
v2: Address review comments (Michal W)
v3: Checkpatch() corrections
v4: Remove unnecessary header file (Matthew Brost)
v5: checkpatch() and define const for 50/3 (Matthew Brost)
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-14-vinay.belgaumkar@intel.com
|
|
Update the get/set min/max freq hooks to work for
SLPC case as well. Consolidate helpers for requested/min/max
frequency get/set to intel_rps where the proper action can
be taken depending on whether SLPC is enabled.
v2: Add wrappers for getting rp0/1/n frequencies, update
softlimits in set min/max SLPC functions. Also check for
boundary conditions before setting them.
v3: Address review comments (Michal W)
v4: Add helper for host part of intel_rps_set_freq helpers (Michal W)
v5: checkpatch()
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-13-vinay.belgaumkar@intel.com
|
|
Cache rp0, rp1 and rpn platform limits into SLPC structure
for range checking while setting min/max frequencies.
Also add "soft" limits which keep track of frequency changes
made from userland. These are initially set to platform min
and max.
v2: Address review comments (Michal W)
v3: Formatting (Michal W)
v4: Add separate function to parse rp values (Michal W)
v5: Perform range checking for set min/max (Michal W)
v6: checkpatch() and rename static functions (Michal W)
v7: check ret code while setting SLPC limits (Michal W)
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-12-vinay.belgaumkar@intel.com
|
|
This interrupt is enabled during RPS initialization, and
now needs to be done by SLPC code. It allows ARAT timer
expiry interrupts to get forwarded to GuC.
v2: Fix comment (Matthew Brost)
v3: checkpatch()
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-11-vinay.belgaumkar@intel.com
|
|
This prints out relevant SLPC info from the SLPC shared structure.
We will send a H2G message which forces SLPC to update the
shared data structure with latest information before reading it.
v2: Address review comments (Michal W)
v3: Remove unnecessary tasks from slpc_info (Michal W)
v4: Rename function to intel_guc_slpc_print_info() (Michal W)
v5: checkpatch()
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-10-vinay.belgaumkar@intel.com
|
|
Add helpers to read the min/max frequency being used
by SLPC. This is done by send a H2G command which forces
SLPC to update the shared data struct which can then be
read. These helpers will be used in a sysfs patch later
on.
v2: Address review comments (Michal W)
v3: Return err in case of query failure (Michal W)
v4: Move decode_min/max_freq to this patch
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-9-vinay.belgaumkar@intel.com
|
|
Add param set h2g helpers to set the min and max frequencies
for use by SLPC.
v2: Address review comments (Michal W)
v3: Check for positive error code (Michal W)
v4: Print generic error in set_param (Michal W)
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-8-vinay.belgaumkar@intel.com
|
|
The assumption when it was added was that GT would not be
holding any gt_pm references. However, uc_init is called
from gt_init_hw, which holds a forcewake ref. If SLPC
enable fails, we will still be holding this ref, which will
result in the BUG_ON.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-7-vinay.belgaumkar@intel.com
|
|
Add methods for interacting with GuC for enabling SLPC. Enable
SLPC after GuC submission has been established. GuC load will
fail if SLPC cannot be successfully initialized. Add various
helper methods to set/unset the parameters for SLPC. They can
be set using H2G calls or directly setting bits in the shared
data structure.
v2: Address several review comments, add new helpers for
decoding the SLPC min/max frequencies. Use masks instead of hardcoded
constants. (Michal W)
v3: Split global_state_to_string function, and check for positive
non-zero return value from intel_guc_send() (Michal W)
v4: Optimize the stringify function and other comments (Michal W)
v5: Enable slpc as well before declaring GuC submission status (Michal W)
v6: Checkpatch()
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-6-vinay.belgaumkar@intel.com
|
|
Allocate data structures for SLPC and functions for
initializing on host side.
v2: Address review comments (Michal W)
v3: Remove unnecessary header includes (Michal W)
v4: Rebase
v5: Move allocation of shared data into slpc_init() (Michal W)
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-5-vinay.belgaumkar@intel.com
|
|
Add constants and params that are needed to configure SLPC.
v2: Add a new abi header for SLPC. Replace bitfields with
genmasks. Address other comments from Michal W.
v3: Add slpc H2G format in abi, other review commments (Michal W)
v4: Update status bits according to latest spec
v5: checkpatch()
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-4-vinay.belgaumkar@intel.com
|
|
Also ensure uc_init is called before we initialize RPS so that we
can check for SLPC support. We do not need to enable up/down
interrupts when SLPC is enabled. However, we still need the ARAT
interrupt, which will be enabled separately later.
v2: Explicitly return from intel_rps_enable with slpc check (Matthew B)
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-3-vinay.belgaumkar@intel.com
|
|
Add macros to check for SLPC support. This feature is currently supported
for Gen12+ and enabled whenever GuC submission is enabled/selected.
Include templates for SLPC init/fini and enable.
v2: Move SLPC helper functions to intel_guc_slpc.c/.h. Define
basic template for SLPC structure in intel_guc_slpc_types.h.
Fix copyright (Michal W)
v3: Review comments (Michal W)
v4: Include supported/selected inside slpc struct (Michal W)
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-2-vinay.belgaumkar@intel.com
|
|
CI test results/further experiments show that the workaround added in
commit 573d7ce4f69a ("drm/i915/adlp: Add workaround to disable CMTG clock gating")
can be applied only while DPLL0 is enabled. If it's disabled the
TRANS_CMTG_CHICKEN register is not accessible. Accordingly move the WA
to DPLL0 HW state sanitization and enabling.
This fixes an issue where the WA won't get applied (and a WARN is thrown
due to an unexpected value in TRANS_CMTG_CHICKEN) if the driver is
loaded without DPLL0 being enabled: booting without BIOS enabling an
output with this PLL, or reloading the driver.
While at it also add a debug print for the unexpected register value.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210802190148.2099625-1-imre.deak@intel.com
|
|
In the unlikely event that pci_register_device() fails, we were tearing
down our PMU setup but not globals. This leaves a bunch of memory slabs
lying around.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Fixes: 32eb6bcfdda9 ("drm/i915: Make request allocation caches global")
[danvet: Fix conflicts against removal of the globals_flush
infrastructure.]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-3-jason@jlekstrand.net
(cherry picked from commit db484889d1ff0645e07e360d3e3ad306c0515821)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Fixed small conflict while cherry picking]
|
|
The register offset for SFC_DONE was missing a '0' at the end, causing
us to read from a non-existent register address. We only use this
register in error state dumps so the mistake hasn't caused any real
problems, but fixing it will hopefully make the error state dumps a bit
more useful for debugging.
Fixes: e50dbdbfd9fb ("drm/i915/tgl: Add SFC instdone to error state")
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728233411.2365788-1-matthew.d.roper@intel.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
(cherry picked from commit 82929a2140eb99f1f1d21855f3f580e70d7abdd8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This patch fixes a spelling typo in error message.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove the repeated word 'the' from comments
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove the repeated word 'the' from comments
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It is to workaround HW bug on other Asics and based on
reverting two commits back:
drm/amdkfd: Add heavy-weight TLB flush after unmapping
drm/amdkfd: Add memory sync before TLB flush on unmap
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 53d0533049a573298f74ae07a39db14163960e68.
Revert reason: The issue has been resolved.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 4bba567c8c35a9cbcd16fb4780a0c3dfd162e08e.
Revert reason: The issue has been resolved.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
described""
This reverts commit 4e7b93ca52fb228b177168d436449c5671415a72.
Revert reason: The issue has been resolved.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 7ed9876c9793bfe96fed58ba645d6c8e32f26001.
Revert reason: The issue has been resolved.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 024d8811c90ed56d8b90cdcf71e51c9fedeff460.
Revert reason: The issue has been resolved.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 430f8e6edbaac8abfddf76f1aef732d9c6257211.
Revert reason: Issue has been resolved.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If one GTT BO has been evicted/swapped out, it should sit in CPU domain.
TTM only alloc struct ttm_resource instead of struct ttm_range_mgr_node
for sysMem.
Now when we update mapping for such invalidated BOs, we might walk out
of bounds of struct ttm_resource.
Three possible fix:
1) Let sysMem manager alloc struct ttm_range_mgr_node, like
ttm_range_manager does.
2) Pass pages_addr to update_mapping function too, but need memset
pages_addr[] to zero when unpopulate.
3) Init amdgpu_res_cursor directly.
bug is detected by kfence.
==================================================================
BUG: KFENCE: out-of-bounds read in amdgpu_vm_bo_update_mapping+0x564/0x6e0
Out-of-bounds read at 0x000000008ea93fe9 (64B right of kfence-#167):
amdgpu_vm_bo_update_mapping+0x564/0x6e0 [amdgpu]
amdgpu_vm_bo_update+0x282/0xa40 [amdgpu]
amdgpu_vm_handle_moved+0x19e/0x1f0 [amdgpu]
amdgpu_cs_vm_handling+0x4e4/0x640 [amdgpu]
amdgpu_cs_ioctl+0x19e7/0x23c0 [amdgpu]
drm_ioctl_kernel+0xf3/0x180 [drm]
drm_ioctl+0x2cb/0x550 [drm]
amdgpu_drm_ioctl+0x5e/0xb0 [amdgpu]
kfence-#167 [0x000000008e11c055-0x000000001f676b3e
ttm_sys_man_alloc+0x35/0x80 [ttm]
ttm_resource_alloc+0x39/0x50 [ttm]
ttm_bo_swapout+0x252/0x5a0 [ttm]
ttm_device_swapout+0x107/0x180 [ttm]
ttm_global_swapout+0x6f/0x130 [ttm]
ttm_tt_populate+0xb1/0x2a0 [ttm]
ttm_bo_handle_move_mem+0x17e/0x1d0 [ttm]
ttm_mem_evict_first+0x59d/0x9c0 [ttm]
ttm_bo_mem_space+0x39f/0x400 [ttm]
ttm_bo_validate+0x13c/0x340 [ttm]
ttm_bo_init_reserved+0x269/0x540 [ttm]
amdgpu_bo_create+0x1d1/0xa30 [amdgpu]
amdgpu_bo_create_user+0x40/0x80 [amdgpu]
amdgpu_gem_object_create+0x71/0xc0 [amdgpu]
amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x2f2/0xcd0 [amdgpu]
kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu]
kfd_ioctl+0x461/0x690 [amdgpu]
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Register accesses are always 4bytes, accidently this was changed to
a void pointer whwqich badly breaks 64bit archs when running on top
of svga3.
Fixes: 2cd80dbd3551 ("drm/vmwgfx: Add basic support for SVGA3")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615182336.995192-3-zackr@vmware.com
(cherry picked from commit 87360168759879d68550b0c052bbcc2a0339ff74)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
The register offset for SFC_DONE was missing a '0' at the end, causing
us to read from a non-existent register address. We only use this
register in error state dumps so the mistake hasn't caused any real
problems, but fixing it will hopefully make the error state dumps a bit
more useful for debugging.
Fixes: e50dbdbfd9fb ("drm/i915/tgl: Add SFC instdone to error state")
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728233411.2365788-1-matthew.d.roper@intel.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
|
|
Abstract the framebuffer details by mappings its BOs with a call
to drm_gem_fb_vmap(). Unmap with drm_gem_fb_vunamp().
Before, the output address with stored as raw pointer in the priv
field of struct drm_writeback_job. Introduce the new type
struct vkms_writeback_job, which holds the output mappings addresses
while the writeback job is active.
The patchset also cleans up some internal casting an setup of the
output addresses. No functional changes.
v3:
* free instances of struct vkms_writeback_job on cleanup
or errors
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730183511.20080-6-tzimmermann@suse.de
|
|
Abstract the framebuffer details by mapping its BOs with a call
to drm_gem_fb_vmap(). Unmap with drm_gem_fb_vunmap().
The call to drm_gem_fb_vmap() ensures that all BOs are mapped
correctly. Gud still only supports single-plane formats.
No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730183511.20080-5-tzimmermann@suse.de
|
|
Set the returned mapping address to NULL if a framebuffer plane does
not have a BO associated with it. Likewise, ignore mappings of NULL
during framebuffer unmap operations. Allows users of the functions to
perform unmap operations of certain BOs by themselfes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730183511.20080-4-tzimmermann@suse.de
|
|
Move framebuffer vmap code from shadow-buffered plane state into the new
interfaces drm_gem_fb_vmap() and drm_gem_fb_vunmap(). These functions
provide mappings of a framebuffer's BOs into kernel address space. No
functional changes.
v4:
* remove duplicated blank line
v2:
* using [static N] for array parameters enables compile-time checks
* include <drm/drm_fourcc.h> for DRM_FORMAT_MAX_PLANES (kernel
test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730183511.20080-3-tzimmermann@suse.de
|
|
DRM uses a magic number of 4 for the maximum number of planes per color
format. Declare this constant via DRM_FORMAT_MAX_PLANES and update the
related code. Some code depends on the length of arrays that are now
declared with DRM_FORMAT_MAX_PLANES. Convert it from '4' to ARRAY_SIZE.
v2:
* mention usage of ARRAY_SIZE() in the commit message (Maxime)
* also fix error handling in drm_gem_fb_init_with_funcs()
(kernel test robot)
* include <drm/drm_fourcc.h> for DRM_FORMAT_MAX_PLANES
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730183511.20080-2-tzimmermann@suse.de
|
|
DG1 and XE_PLD platforms has Audio MMIO/VERBS lies in PG0 power
well. Adjusting the power domain accordingly to
POWER_DOMAIN_AUDIO_MMIO for audio detection and
POWER_DOMAIN_AUDIO_PLAYBACK for audio playback.
While doing this it requires to use POWER_DOMAIN_AUDIO_MMIO
power domain instead of POWER_DOMAIN_AUDIO in crtc power domain mask
and POWER_DOMAIN_AUDIO_PLAYBACK with intel_display_power_{get, put}
to enable/disable display audio codec power.
It will save the power in use cases when DP/HDMI connectors
configured with PIPE_A without any audio playback.
v1: Changes since RFC
- changed power domain names. [Imre]
- Removed TC{3,6}, AUX_USBC{3,6} and TBT from DG1
power well and PW_3 power domains. [Imre]
- Fixed the order of powe wells , power domains and its
registration. [Imre]
v2:
- Not allowe DC states when AUDIO_MMIO domain enabled. [Imre]
v3:
- Squashes the commits of series to avoid build failure.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
[Fix typo in commit message and in AUDIO_PLAYBACK domain name]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729121858.16897-2-anshuman.gupta@intel.com
|
|
I've added a new check to make sure that drivers which insepct the
damage property have it set up correctly, but somehow missed that this
borke the damage selftest in the CI result noise.
Fix it up by mocking enough of drm_device and drm_plane so we can call
drm_plane_enable_fb_damage_clips() to make the new check happy.
Since there's a lot of duplicated mock code already copy-pasted into
each test I've also refactored this a bit to trim it down.
v2: Squash in fixup from 0day for
drivers/gpu/drm/selftests/test-drm_damage_helper.c:15:19: warning: symbol 'mock_device' was not declared. Should it be static?
drivers/gpu/drm/selftests/test-drm_damage_helper.c:16:30: warning: symbol 'mock_obj_props' was not declared. Should it be static?
drivers/gpu/drm/selftests/test-drm_damage_helper.c:17:18: warning: symbol 'mock_plane' was not declared. Should it be static?
drivers/gpu/drm/selftests/test-drm_damage_helper.c:18:21: warning: symbol 'mock_prop' was not declared. Should it be static?
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Fixes: c7fcbf251397 ("drm/plane: check that fb_damage is set up when used")
Cc: José Roberto de Souza <jose.souza@intel.com> (v1)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730095251.4343-1-daniel.vetter@ffwll.ch
Link: https://patchwork.freedesktop.org/patch/msgid/20210730141948.GA11955@243d74413310
|
|
fix typo for drm
v1->v2:
respin with the change "iff ==> implies that"
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730132729.376-1-caihuoqing@baidu.com
|
|
Removed space before comma, fixed if statements by putting trailing
statements on new line, fixed unsigned int declaration, and removed
not needed else statement after return.
Signed-off-by: Gregory Williams <gregwills85@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210731005328.GA19016@devbox
|
|
Add support for the 10.3" E Ink panel described at:
https://www.eink.com/product.html?type=productdetail&id=7
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210801004701.831-1-alistair@alistair23.me
|
|
Remove including <linux/version.h> that don't need it.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727052107.659-1-caihuoqing@baidu.com
|
|
The Samsung ATNA33XC20 panel is an AMOLED eDP panel that has backlight
control over the DP AUX channel.
This panel is _almost_ able to be controlled in a "simple" way (and it
originally was implemented in panel-simple.c), but it's really
impossible to get the backlight semantics right there without adding
wacky special-case code to panel-simple. Let's give up and clone the
parts of panel-simple that we need and implement the power sequence
that this panel needs.
NOTE: we'll still leave the devicetree bindings alone. Even though the
power-sequencing is non-standard the bindings are still "simple".
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.6.I3a2900080f8749d2bb4baf49ca902db4b0e1df7d@changeid
|
|
This reverts commit 18a1488bf1e13fc3fc96d7948466b2166067c6c8.
Those delays were added to support the Samsung ATNA33XC20
panel. However, we've moving that to its own panel driver and out of
panel-simple. That means we don't need the ability to specify this
delay.
NOTE: it's unlikely we want to keep this delay "just in case" some
other panel needs it. The enable-gpio and the power supply are really
supposed to be different ways to specify the same thing: the main
enable of the panel. Supporting a delay between them doesn't really
make sense.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.5.Ie44e3e5b7a926392541d575ca84c56931596513f@changeid
|
|
This reverts commit 4bfe6c8f7c23b01719671b69fd29b87a35ccd9d6.
This panel's power sequencing really can't be handled properly by
panel-simple because of the special sequencing needed for the EL_ON3
GPIO. The only way it was sorta working in the past was by trying to
jam that signal into the "enable-gpio", but that really wasn't a good
fit. We'll add a custom panel driver for this panel to do it right.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.4.Id9f076ec5f35633f8ce931051af268a04c45c075@changeid
|
|
The manual has always said that we need 100 us delays in a few
places. Though it hasn't seemed to be a big deal to skip these, let's
add them in case it makes something happier.
NOTE: this fixes no known issues but it seems good to make it right.
Fixes: a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.3.I842d483139531aa4651da8338512fdf0171ff23c@changeid
|
|
When testing with a panel that's apparently a little more persnickety
about the correct power sequence (specifically Samsung ATNA33XC20), we
found that the ti-sn65dsi86 was doing things just slightly wrong.
Looking closely at the ti-sn65dsi86's datasheet, the power off
sequence is supposed to be:
1. Clear VSTREAM_ENABLE bit
2. Stop DSI stream from GPU. DSI lanes must be placed in LP11 state.
3. Program the ML_TX_MODE to 0x0 (OFF)
4. Program the DP_NUM_LANES register to 0x0
5. Clear the DP_PLL_EN bit.
6. Deassert the EN pin.
7. Remove power from supply pins
Since we were doing the whole sequence in the "disable", I believe
that step #2 (stopping the DSI stream from the GPU) wasn't
happening. We also weren't setting DP_NUM_LANES to 0.
Let's fix this.
NOTE: things are a little asymmetric now. For instance, we turn the
PLL on in "enable" but now we're not turning it off until
"post_disable". It would seem to make sense to move the PLL turning on
to "pre_enable" to match. Unfortunately, I don't believe that's
allowed. It looks as if (in the non-refclk mode which probably nobody
is using) we have to wait until the MIPI clock is there before we can
enable the PLL. In any case, the way it is here won't really
hurt--it'll just leave the PLL on a little longer.
Fixes: a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.2.If8a8ec3bf1855cf0dbb62c005a71d6698c99c125@changeid
|
|
The function drm_edp_backlight_init() is defined such that the
"driver_pwm_freq_hz" parameter is optional--it's 0 if you don't want
to futz with it. If you follow this variable through, you'll find out
that if it's 0 we won't ever set the "bl->pwmgen_bit_count", leaving
it as 0.
That means that before using it in drm_edp_backlight_enable() we need
to check to see if it's non-zero.
Programming this field to zero was confusing the panel I tested with
(Samsung ATNA33XC20). The backlight still worked somewhat but the
brightness values didn't correspond to what they should have been.
Fixes: 867cf9cd73c3 ("drm/dp: Extract i915's eDP backlight code into DRM helpers")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.1.If017efce7116ae8ba015ed7def840c390a0e0c77@changeid
|
