Age | Commit message (Collapse) | Author | Files | Lines |
|
In pass-through mode, after mode 1 reset, msix enablement status would
lost and never receives interrupt again. So, we should restore msix
status after mode 1 reset.
Signed-off-by: Chengzhe Liu <ChengZhe.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The fail reason is that the vfgate is disabled
Signed-off-by: Roy Sun <Roy.Sun@amd.com>
Reviewed-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Regression found in some embedded panels traces back to the earliest
upstreamed ASSR patch. The changed code flow are causing problems
with some panels.
[How]
- Change ASSR enabling code while preserving original code flow
as much as possible
- Simplify the code on guarding with internal display flag
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213779
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1620
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On Sienna Cichlid, in pass-through mode, if we unload the driver in BACO
mode(RTPM), then the kernel would receive thousands of interrupts.
That's because there is doorbell monitor interrupt on BIF, so KVM keeps
injecting interrupts to the guest VM. So we should clear the doorbell
interrupt status after BACO exit.
v2: Modify coding style and commit message
Signed-off-by: Chengzhe Liu <ChengZhe.Liu@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This fixes a bug which if we probe a non-existing
I2C device, and the SMU returns 0xFF, from then on
we can never communicate with the SMU, because the
code before this patch reads and interprets 0xFF
as a terminal error, and thus we never write 0
into register 90 to clear the status (and
subsequently send a new command to the SMU.)
It is not an error that the SMU returns status
0xFF. This means that the SMU executed the last
command successfully (execution status), but the
command result is an error of some sort (execution
result), depending on what the command was.
When doing a status check of the SMU, before we
send a new command, the only status which
precludes us from sending a new command is 0--the
SMU hasn't finished executing a previous command,
and 0xFC--the SMU is busy.
This bug was seen as the following line in the
kernel log,
amdgpu: Msg issuing pre-check failed(0xff) and SMU may be not in the right state!
when subsequent SMU commands, not necessarily
related to I2C, were sent to the SMU.
This patch fixes this bug.
v2: Add a comment to the description of
__smu_cmn_poll_stat() to explain why we're NOT
defining the SMU FW return codes as macros, but
are instead hard-coding them. Such a change, can
be followed up by a subsequent patch.
v3: The changes are,
a) Add comments to break labels in
__smu_cmn_reg2errno().
b) When an unknown/unspecified/undefined result is
returned back from the SMU, map that to
-EREMOTEIO, to distinguish failure at the SMU
FW.
c) Add kernel-doc to
smu_cmn_send_msg_without_waiting(),
smu_cmn_wait_for_response(),
smu_cmn_send_smc_msg_with_param().
d) In smu_cmn_send_smc_msg_with_param(), since we
wait for completion of the command, if the
result of the completion is
undefined/unknown/unspecified, we print that to
the kernel log.
v4: a) Add macros as requested, though redundant, to
be removed when SMU consolidates for all
ASICs--see comment in code.
b) Get out if the SMU code is unknown.
v5: Rename the macro names.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Fixes: fcb1fe9c9e0031 ("drm/amd/powerplay: pre-check the SMU state before issuing message")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Asic cyan_skilfish2 won't support RLC autoload when using
front door loading. We just use PSP to load firmware like
gfx9 here.
So add autoload_supported flag check instead of just
checking firmware load type for RLC autoload.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable SMU support for cyan_skilfish.
v2: Squash in fix (Alex)
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add check_fw_version function support for cyan_skillfish.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add basic ppt funcs support or cyan_skilfish.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add smu11_driver_if_cyan_skillfish.h for cyan_skilfish.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add smu_v11_8_ppsmc.h for cyan_skilfish.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add smu_v11_8_pmfw.h for cyan_skilfish.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Will switch to front door loading by default after this function is
stable.
v2: use APU flags (Alex)
Signed-off-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add psp v11.0.8 to ip block initialization.
v2: use APU flags (Alex)
Signed-off-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add psp v11.0.8 function into psp driver.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Introduce the psp v11.0.8 driver for cyan_skillfish.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The cyan_skillfish will use the mp 11.0.8.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
nbio version is 2.3.
v2: Make it more explicit (Alex)
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set cg/pg flags and rev id for cyan_skillfish.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add KFD support for cyan_skillfish.
v2: whitespace fixes (Alex)
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v2: squash in updates from Ray
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add gfx support for cyan_skillfish.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add gmc support for cyan_skillfish.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use backdoor loading.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Same as Navi10.
v2: squash in updates (Alex)
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add cp/rlc fw loading support and gfx golden setting.
v2: squash in updates (Alex)
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ip blocks for cyan_skillfish.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use FAMILY_NV for cyan_skillfish.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ip offset definition for cyan_skillfish and initialize it.
v2: squash in ip_offset updates (Alex)
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add cyan_skillfish asic family.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Adjust toc fw_name string length to PSP_FW_NAME_LEN.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Longer firmware name needs more space.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add Yellow Carp PCI id support.
v2: add another DID
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
0x1681 has a different external revision id.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Devices created by mfd_add_hotplug_devices() don't really increase the
index of its name, so get_mfd_cell_dev() cannot find any device, hence a
NULL dev is passed to pm_genpd_add_device():
[ 56.974926] (NULL device *): amdgpu: device acp_audio_dma.0.auto added to pm domain
[ 56.974933] (NULL device *): amdgpu: Failed to add dev to genpd
[ 56.974941] [drm:amdgpu_device_ip_init [amdgpu]] *ERROR* hw_init of IP block <acp_ip> failed -22
[ 56.975810] amdgpu 0000:00:01.0: amdgpu: amdgpu_device_ip_init failed
[ 56.975839] amdgpu 0000:00:01.0: amdgpu: Fatal error during GPU init
[ 56.977136] ------------[ cut here ]------------
[ 56.977143] kernel BUG at mm/slub.c:4206!
[ 56.977158] invalid opcode: 0000 [#1] SMP NOPTI
[ 56.977167] CPU: 1 PID: 1648 Comm: modprobe Not tainted 5.12.0-051200rc8-generic #202104182230
[ 56.977175] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./FM2A68M-HD+, BIOS P5.20 02/13/2019
[ 56.977180] RIP: 0010:kfree+0x3bf/0x410
[ 56.977195] Code: 89 e7 48 d3 e2 f7 da e8 5f 0d 02 00 80 e7 02 75 3e 44 89 ee 4c 89 e7 e8 ef 5f fd ff e9 fa fe ff ff 49 8b 44 24 08 a8 01 75 b7 <0f> 0b 4c 8b 4d b0 48 8b 4d a8 48 89 da 4c 89 e6 41 b8 01 00 00 00
[ 56.977202] RSP: 0018:ffffa48640ff79f0 EFLAGS: 00010246
[ 56.977210] RAX: 0000000000000000 RBX: ffff9286127d5608 RCX: 0000000000000000
[ 56.977215] RDX: 0000000000000000 RSI: ffffffffc099d0fb RDI: ffff9286127d5608
[ 56.977220] RBP: ffffa48640ff7a48 R08: 0000000000000001 R09: 0000000000000001
[ 56.977224] R10: 0000000000000000 R11: ffff9286087d8458 R12: fffff3ae0449f540
[ 56.977229] R13: 0000000000000000 R14: dead000000000122 R15: dead000000000100
[ 56.977234] FS: 00007f9de5929540(0000) GS:ffff928612e80000(0000) knlGS:0000000000000000
[ 56.977240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 56.977245] CR2: 00007f697dd97160 CR3: 00000001110f0000 CR4: 00000000001506e0
[ 56.977251] Call Trace:
[ 56.977261] amdgpu_dm_encoder_destroy+0x1b/0x30 [amdgpu]
[ 56.978056] drm_mode_config_cleanup+0x4f/0x2e0 [drm]
[ 56.978147] ? kfree+0x3dd/0x410
[ 56.978157] ? drm_managed_release+0xc8/0x100 [drm]
[ 56.978232] drm_mode_config_init_release+0xe/0x10 [drm]
[ 56.978311] drm_managed_release+0x9d/0x100 [drm]
[ 56.978388] devm_drm_dev_init_release+0x4d/0x70 [drm]
[ 56.978450] devm_action_release+0x15/0x20
[ 56.978459] release_nodes+0x77/0xc0
[ 56.978469] devres_release_all+0x3f/0x50
[ 56.978477] really_probe+0x245/0x460
[ 56.978485] driver_probe_device+0xe9/0x160
[ 56.978492] device_driver_attach+0xab/0xb0
[ 56.978499] __driver_attach+0x8f/0x150
[ 56.978506] ? device_driver_attach+0xb0/0xb0
[ 56.978513] bus_for_each_dev+0x7e/0xc0
[ 56.978521] driver_attach+0x1e/0x20
[ 56.978528] bus_add_driver+0x135/0x1f0
[ 56.978534] driver_register+0x91/0xf0
[ 56.978540] __pci_register_driver+0x54/0x60
[ 56.978549] amdgpu_init+0x77/0x1000 [amdgpu]
[ 56.979246] ? 0xffffffffc0dbc000
[ 56.979254] do_one_initcall+0x48/0x1d0
[ 56.979265] ? kmem_cache_alloc_trace+0x120/0x230
[ 56.979274] ? do_init_module+0x28/0x280
[ 56.979282] do_init_module+0x62/0x280
[ 56.979288] load_module+0x71c/0x7a0
[ 56.979296] __do_sys_finit_module+0xc2/0x120
[ 56.979305] __x64_sys_finit_module+0x1a/0x20
[ 56.979311] do_syscall_64+0x38/0x90
[ 56.979319] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 56.979328] RIP: 0033:0x7f9de54f989d
[ 56.979335] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 f5 0c 00 f7 d8 64 89 01 48
[ 56.979342] RSP: 002b:00007ffe3c395a28 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 56.979350] RAX: ffffffffffffffda RBX: 0000560df3ef4330 RCX: 00007f9de54f989d
[ 56.979355] RDX: 0000000000000000 RSI: 0000560df3a07358 RDI: 000000000000000f
[ 56.979360] RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000000
[ 56.979365] R10: 000000000000000f R11: 0000000000000246 R12: 0000560df3a07358
[ 56.979369] R13: 0000000000000000 R14: 0000560df3ef4460 R15: 0000560df3ef4330
[ 56.979377] Modules linked in: amdgpu(+) iommu_v2 gpu_sched drm_ttm_helper ttm drm_kms_helper cec rc_core i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt nft_counter xt_tcpudp ipt_REJECT nf_reject_ipv4 xt_conntrack iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_raw iptable_security ip_set nf_tables libcrc32c nfnetlink ip6_tables iptable_filter bpfilter input_leds binfmt_misc edac_mce_amd kvm_amd ccp kvm snd_hda_codec_realtek snd_hda_codec_generic crct10dif_pclmul snd_hda_codec_hdmi ledtrig_audio ghash_clmulni_intel aesni_intel snd_hda_intel snd_intel_dspcfg snd_seq_midi crypto_simd snd_intel_sdw_acpi cryptd snd_hda_codec snd_seq_midi_event snd_rawmidi snd_hda_core snd_hwdep snd_seq fam15h_power k10temp snd_pcm snd_seq_device snd_timer snd mac_hid soundcore sch_fq_codel nct6775 hwmon_vid drm ip_tables x_tables autofs4 dm_mirror dm_region_hash dm_log hid_generic usbhid hid uas usb_storage r8169 crc32_pclmul realtek ahci xhci_pci i2c_piix4
[ 56.979521] xhci_pci_renesas libahci video
[ 56.979541] ---[ end trace cb8f6a346f18da7b ]---
Instead of finding MFD hotplugged device by its name, simply iterate
over the child devices to avoid the issue.
Squash in unused variable removal (Alex)
BugLink: https://bugs.launchpad.net/bugs/1920674
Fixes: 25030321ba28 ("drm/amd: add pm domain for ACP IP sub blocks")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Currently all timedout job will be considered to be guilty. In SRIOV
multi-vf use case, the vf flr happens first and then job time out is
found. There can be several jobs timeout during a very small time slice.
And if the innocent sdma job time out is found before the real bad
job, then the innocent sdma job will be set to guilty. This will lead
to a page fault after resubmitting job.
[How]
If the job is a kernel job, we will always consider it not guilty
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update Arcturus/Aldebaran thermal throttle SMI event path to use
ASIC-independent throttler bits when logging.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix make htmldocs complaint:
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:628: warning: Excess function parameter 'interrupt_params' description in 'DMUB_TRACE_MAX_READ'
v2:
Moved DMUB_TRACE_MAX_READ macro above function documentation
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
CC: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add new line to phy_settings output
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
link_rate is updated via debugfs using hex values, set it to output
in hex as well.
eg: Resolution: 1920x1080@144Hz
cat /sys/kernel/debug/dri/0/DP-1/link_settings
Current: 4 0x14 0 Verified: 4 0x1e 0 Reported: 4 0x1e 16 Preferred: 0 0x0 0
echo "4 0x1e" > /sys/kernel/debug/dri/0/DP-1/link_settings
cat /sys/kernel/debug/dri/0/DP-1/link_settings
Current: 4 0x1e 0 Verified: 4 0x1e 0 Reported: 4 0x1e 16 Preferred: 4 0x1e 0
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
start_cpsch and stop_cpsch can be called during kfd device
initialization or during gpu reset/recovery. So they can
run concurrently. Currently in start_cpsch and stop_cpsch,
pm_init and pm_uninit is not protected by the dpm lock.
Imagine such a case that user use packet manager's function
to submit a pm4 packet to hang hws (ie through command
cat /sys/class/kfd/kfd/topology/nodes/1/gpu_id | sudo tee
/sys/kernel/debug/kfd/hang_hws), while kfd device is under
device reset/recovery so packet manager can be not initialized.
There will be unpredictable protection fault in such case.
This patch moves pm_init/uninit inside the dpm lock and check
packet manager is initialized before using packet manager
function.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Christian Konig <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This variable will be used to determine whether packet
manager is initialized or not, in a future patch.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Christian Konig <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Renaming packets to packet_mgr to reflect the real meaning
of this variable.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Christian Konig <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Function name "psp_np_fw_load" is not proper as people don't
know _np_fw_ means "non psp firmware". Change the function
name to psp_load_non_psp_fw for better understanding. Same
thing for function psp_execute_np_fw_load.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The printing message "PSP loading VCN firmware" is mis-leading because
people might think driver is loading VCN firmware. Actually when this
message is printed, driver is just preparing some VCN ucode, not loading
VCN firmware yet. The actual VCN firmware loading will be in the PSP block
hw_init. Fix the printing message
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Squash in warning fix (Alex)
Signed-off-by: Roy Sun <Roy.Sun@amd.com>
Reviewed-by: Zhou pengju <pengju.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The callback functions are used for SRIOV read/write instead
of just for rlcg read/write
Signed-off-by: Roy Sun <Roy.Sun@amd.com>
Reviewed-by: Zhou pengju <pengju.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|