summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/sun4i
AgeCommit message (Collapse)AuthorFilesLines
2021-11-18Merge drm/drm-next into drm-misc-nextThomas Zimmermann3-47/+61
Backmerging from drm/drm-next for v5.16-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2021-10-28BackMerge tag 'v5.15-rc7' into drm-nextDave Airlie3-47/+61
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in. Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-21drm/sun4i: virtual CMA addresses are not neededJernej Skrabec1-1/+1
Driver never uses virtual address of DRM CMA buffers. Switch to CMA helpers which don't deal with virtual mapping. This was actually already the case before commit ad408c766cef ("drm/sun4i: Use DRM_GEM_CMA_VMAP_DRIVER_OPS for GEM operations"), but only convenient macro at the time used helpers with virtual mapping. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211019181028.4190737-1-jernej.skrabec@gmail.com
2021-10-06drm/sun4i: dw-hdmi: Fix HDMI PHY clock setupJernej Skrabec3-47/+61
Recent rework, which made HDMI PHY driver a platform device, inadvertely reversed clock setup order. HW is very touchy about it. Proper way is to handle controllers resets and clocks first and HDMI PHYs second. Currently, without this fix, first mode set completely fails (nothing on HDMI monitor) on H3 era PHYs. On H6, it still somehow work. Move HDMI PHY reset & clocks handling to sun8i_hdmi_phy_init() which will assure that code is executed after controllers reset & clocks are handled. Additionally, add sun8i_hdmi_phy_deinit() which will deinit them at controllers driver unload. Tested on A64, H3, H6 and R40. Fixes: 9bf3797796f5 ("drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device") Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210915175836.3158839-1-jernej.skrabec@gmail.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-09-16drm/sun4i: dw-hdmi: Make use of the helper function dev_err_probe()Cai Huoqing1-12/+9
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. And using dev_err_probe() can reduce code size, the error value gets printed. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210916105633.12162-1-caihuoqing@baidu.com
2021-09-16drm/sun4i: dsi: Make use of the helper function dev_err_probe()Cai Huoqing1-8/+6
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. And using dev_err_probe() can reduce code size, the error value gets printed. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210916105625.12109-1-caihuoqing@baidu.com
2021-09-01drm/sun4i: Fix macros in sun8i_csc.hJernej Skrabec1-2/+2
Macros SUN8I_CSC_CTRL() and SUN8I_CSC_COEFF() don't follow usual recommendation of having arguments enclosed in parenthesis. While that didn't change anything for quite sometime, it actually become important after CSC code rework with commit ea067aee45a8 ("drm/sun4i: de2/de3: Remove redundant CSC matrices"). Without this fix, colours are completely off for supported YVU formats on SoCs with DE2 (A64, H3, R40, etc.). Fix the issue by enclosing macro arguments in parenthesis. Cc: stable@vger.kernel.org # 5.12+ Fixes: 883029390550 ("drm/sun4i: Add DE2 CSC library") Reported-by: Roman Stratiienko <r.stratiienko@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210831184819.93670-1-jernej.skrabec@gmail.com
2021-09-01drm/sun4i: Make use of the helper function devm_platform_ioremap_resource()Cai Huoqing8-24/+8
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210831135740.4826-1-caihuoqing@baidu.com
2021-07-28drm/bridge: Centralize error message when bridge attach failsLaurent Pinchart2-6/+2
Being informed of a failure to attach a bridge is useful, and many drivers prints an error message in that case. Move the message to drm_bridge_attach() to avoid code duplication. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
2021-07-21Merge tag 'drm-misc-next-2021-07-16' of ↵Dave Airlie4-6/+1
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.15: UAPI Changes: Cross-subsystem Changes: - udmabuf: Add support for mapping hugepages - Add dma-buf stats to sysfs. - Assorted fixes to fbdev/omap2. - dma-buf: Document DMA_BUF_IOCTL_SYNC - Improve dma-buf non-dynamic exporter expectations better. - Add module parameters for dma-buf size and list limit. - Add HDMI codec support to vc4, to replace vc4's own codec. - Document dma-buf implicit fencing rules. - dma_resv_test_signaled test_all handling. Core Changes: - Extract i915's eDP backlight code into DRM helpers. - Assorted docbook updates. - Rework drm_dp_aux documentation. - Add support for the DP aux bus. - Shrink dma-fence-chain slightly. - Add alloc/free helpers for dma-fence-chain. - Assorted fixes to TTM., drm/of, bridge - drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers. - Small fix for scheduler completion. - Remove use of drm_device.irq_enabled. - Print the driver name to dmesg when registering framebuffer. - Export drm/gem's shadow plane handling, and use it in vkms. - Assorted small fixes. Driver Changes: - Add eDP backlight to nouveau. - Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625, amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm. - Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU, EDT ETM0350G0DH6, Innolux EJ030NA panels. - Fix some simple pannels missing bus_format and connector types. - Add mks-guest-stats instrumentation support to vmwgfx. - Merge i915-ttm topic branch. - Make s6e63m0 panel use Mipi-DBI helpers. - Add detect() supoprt for AST. - Use interrupts for hotplug on vc4. - vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now. - vmwgfx now uses copies of vmware's internal device headers. - Slowly convert ti-sn65dsi83 over to atomic. - Rework amdgpu dma-resv handling. - Fix virtio fencing for planes. - Ensure amdgpu can always evict to SYSTEM. - Many drivers fixed for implicit fencing rules. - Set default prepare/cleanup fb for tiny, vram and simple helpers too. - Rework panfrost gpu reset and related serialization. - Update VKMS todo list. - Make bochs a tiny gpu driver, and use vram helper. - Use linux irq interfaces instead of drm_irq in some drivers. - Add support for Raspberry Pi Pico to GUD. Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Fri 16 Jul 2021 21:06:04 AEST # gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3 # gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired] # gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired] # gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired] # gpg: Note: This key has expired! # Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3 From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/444811c3-cbec-e9d5-9a6b-9632eda7962a@linux.intel.com
2021-07-01drm/aperture: Pass DRM driver structure instead of driver nameThomas Zimmermann1-1/+1
Print the name of the DRM driver when taking over fbdev devices. Makes the output to dmesg more consistent. Note that the driver name is only used for printing a string to the kernel log. No UAPI is affected by this change. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Chen-Yu Tsai <wens@csie.org> # sun4i Acked-by: Neil Armstrong <narmstrong@baylibre.com> # meson Link: https://patchwork.freedesktop.org/patch/msgid/20210629135833.22679-1-tzimmermann@suse.de
2021-06-29drm/sun4i: Don't set struct drm_device.irq_enabledThomas Zimmermann1-2/+0
The field drm_device.irq_enabled is only used by legacy drivers with userspace modesetting. Don't set it in sun4i. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-21-tzimmermann@suse.de
2021-06-24drm/<driver>: drm_gem_plane_helper_prepare_fb is now the defaultDaniel Vetter3-3/+0
No need to set it explicitly. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Philippe Cornu <philippe.cornu@foss.st.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Agner <stefan@agner.ch> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Yannick Fertre <yannick.fertre@foss.st.com> Cc: Philippe Cornu <philippe.cornu@foss.st.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Jyri Sarha <jyri.sarha@iki.fi> Cc: Tomi Valkeinen <tomba@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-sunxi@lists.linux.dev Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-9-daniel.vetter@ffwll.ch
2021-06-23Backmerge tag 'v5.13-rc7' into drm-nextDave Airlie3-11/+66
Backmerge Linux 5.13-rc7 to make some pulls from later bases apply, and to bake in the conflicts so far.
2021-06-07drm/sun4i: dw-hdmi: Make HDMI PHY into a platform deviceSaravana Kannan3-11/+66
On sunxi boards that use HDMI output, HDMI device probe keeps being avoided indefinitely with these repeated messages in dmesg: platform 1ee0000.hdmi: probe deferral - supplier 1ef0000.hdmi-phy not ready There's a fwnode_link being created with fw_devlink=on between hdmi and hdmi-phy nodes, because both nodes have 'compatible' property set. Fw_devlink code assumes that nodes that have compatible property set will also have a device associated with them by some driver eventually. This is not the case with the current sun8i-hdmi driver. This commit makes sun8i-hdmi-phy into a proper platform device and fixes the display pipeline probe on sunxi boards that use HDMI. More context: https://lkml.org/lkml/2021/5/16/203 Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Ondrej Jirman <megous@megous.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210607085836.2827429-1-megous@megous.com
2021-06-07drm/sun4i: de3: Be explicit about supported modifiersPiotr Oniszczuk2-2/+13
Currently only linear formats are supported in sun4i-drm driver, but SoCs like H6 supports AFBC variant of some of them in multiple cores (GPU, VPU, DE3). Panfrost already implements AFBC compression and is sometimes confused what should be default choice (linear, AFBC) if DRM driver is not explicit about modifier support (MiniMyth2 distro with MythTV app). After some discussion with Daniel Stone on #panfrost IRC, it was decided to make modifiers in sun4i-drm explicit, to avoid any kind of guessing, not just in panfrost, but everywhere. In fact, long term idea is to make modifier parameter in drm_universal_plane_init() mandatory (non NULL). Signed-off-by: Piotr Oniszczuk <piotr.oniszczuk@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210605073534.3786194-1-jernej.skrabec@gmail.com
2021-04-14drm/aperture: Convert drivers to aperture interfacesThomas Zimmermann1-1/+4
Mass-convert all drivers from FB helpers to aperture interfaces. No functional changes besides checking for returned errno codes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-3-tzimmermann@suse.de
2021-03-16Merge tag 'drm-misc-next-2021-03-03' of ↵Dave Airlie6-37/+137
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - %p4cc printk format modifier - atomic: introduce drm_crtc_commit_wait, rework atomic plane state helpers to take the drm_commit_state structure - dma-buf: heaps rework to return a struct dma_buf - simple-kms: Add plate state helpers - ttm: debugfs support, removal of sysfs Driver Changes: - Convert drivers to shadow plane helpers - arc: Move to drm/tiny - ast: cursor plane reworks - gma500: Remove TTM and medfield support - mxsfb: imx8mm support - panfrost: MMU IRQ handling rework - qxl: rework to better handle resources deallocation, locking - sun4i: Add alpha properties for UI and VI layers - vc4: RPi4 CEC support - vmwgfx: doc cleanup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210303100600.dgnkadonzuvfnu22@gilmour
2021-02-25drm: Use state helper instead of the plane state pointerMaxime Ripard3-3/+6
Many drivers reference the plane->state pointer in order to get the current plane state in their atomic_update or atomic_disable hooks, which would be the new plane state in the global atomic state since _swap_state happened when those hooks are run. Use the drm_atomic_get_new_plane_state helper to get that state to make it more obvious. This was made using the coccinelle script below: @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ adds_new_state @ identifier plane_atomic_func.func; identifier plane, state; identifier new_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *new_state = plane->state; + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane); ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
2021-02-25drm/atomic: Pass the full state to planes atomic disable and updateMaxime Ripard3-6/+17
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert the remaining helpers to provide a consistent interface, this time with the planes atomic_update and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_disable)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier crtc_state; identifier plane, plane_state, state; expression e; @@ f(struct drm_crtc_state *crtc_state) { ... struct drm_atomic_state *state = e; <+... ( - FUNCS->atomic_disable(plane, plane_state) + FUNCS->atomic_disable(plane, state) | - FUNCS->atomic_update(plane, plane_state) + FUNCS->atomic_update(plane, state) ) ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *old_plane_state) { <... - state + old_plane_state ...> } @ ignores_old_state @ identifier plane_atomic_func.func; identifier plane, old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... when != old_state } @ adds_old_state depends on plane_atomic_func && !ignores_old_state @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *plane_state) { + struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); <+... - plane_state->state + state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech
2021-02-24drm: Store new plane state in a variable for atomic_update and disableMaxime Ripard3-5/+8
In order to store the new plane state in a subsequent helper, let's move the plane->state dereferences into a variable. This was done using the following coccinelle script, plus some hand changes for vmwgfx: @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ has_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { + struct drm_plane_state *new_state = plane->state; <+... - plane->state + new_state ...+> } @ has_new_state_state @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { + struct drm_plane_state *new_plane_state = plane->state; <+... - plane->state + new_plane_state ...+> } @ has_new_state_old_s @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol old_s; @@ func(struct drm_plane *plane, struct drm_plane_state *old_s) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_old_s @ identifier plane_atomic_func.func; identifier plane; symbol old_s; @@ func(struct drm_plane *plane, struct drm_plane_state *old_s) { + struct drm_plane_state *new_s = plane->state; <+... - plane->state + new_s ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
2021-02-24drm: Use the state pointer directly in planes atomic_checkMaxime Ripard2-2/+2
Now that atomic_check takes the global atomic state as a parameter, we don't need to go through the pointer in the plane state. This was done using the following coccinelle script: @ plane_atomic_func @ identifier helpers; identifier func; @@ static struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... when != plane_state - plane_state->state + state ...> } @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... - plane_state->state + state ...> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-5-maxime@cerno.tech
2021-02-24drm/atomic: Pass the full state to planes atomic_checkMaxime Ripard2-2/+6
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert all the remaining helpers to provide a consistent interface, starting with the planes atomic_check. The conversion was done using the coccinelle script below plus some manual changes for vmwgfx, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... int (*atomic_check)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_check(plane, plane_state) + FUNCS->atomic_check(plane, state) ...+> } @ ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { ... when != new_plane_state } @ adds_new_state depends on plane_atomic_func && !ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *new_plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
2021-02-24drm: Rename plane atomic_check state namesMaxime Ripard2-8/+12
Most drivers call the argument to the plane atomic_check hook simply state, which is going to conflict with the global atomic state in a later rework. Let's rename it to new_plane_state (or new_state depending on the convention used in the driver). This was done using the coccinelle script below, and built tested: @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { .atomic_check = func, }; @ has_old_state @ identifier plane_atomic_func.func; identifier plane; expression e; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *old_state = e; ... } @ depends on has_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_state ) { <+... - state + new_state ...+> } @ has_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... } @ depends on has_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_plane_state ) { <+... - state + new_plane_state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-2-maxime@cerno.tech
2021-02-23drm/gem: Move drm_gem_fb_prepare_fb() to GEM atomic helpersThomas Zimmermann3-6/+6
The function drm_gem_fb_prepare_fb() is a helper for atomic modesetting, but currently located next to framebuffer helpers. Move it to GEM atomic helpers, rename it slightly and adopt the drivers. Same for the rsp simple-pipe helper. Compile-tested with x86-64, aarch64 and arm. The patch is fairly large, but there are no functional changes. v3: * remove out-comented line in drm_gem_framebuffer_helper.h (Maxime) v2: * rename to drm_gem_plane_helper_prepare_fb() (Daniel) * add tutorial-style documentation Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210222141756.7864-1-tzimmermann@suse.de
2021-02-22Merge tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds5-88/+51
Pull drm updates from Dave Airlie: "A pretty normal tree, lots of refactoring across the board, ttm, i915, nouveau, and bunch of features in various drivers. docs: - lots of updated docs core: - require crtc to have unique primary plane - fourcc macro fix - PCI bar quirk for bar resizing - don't sent hotplug on error - move vm code to legacy - nuke hose only used on old oboslete alpha dma-buf: - kernel doc updates - improved lock tracking dp/hdmi: - DP-HDMI2.1 protocol converter support ttm: - bo size handling cleanup - release a pinned bo warning - cleanup lru handler - avoid using pages with drm_prime_sg_to_page_addr_arrays cma-helper: - prime/mmap fixes bridge: - add DP support gma500: - remove gma3600 support i915: - try eDP fast/narrow link again with fallback - Intel eDP backlight control - replace display register read/write macros - refactor intel_display.c - display power improvements - HPD code cleanup - Rocketlake display fixes - Power/backlight/RPM fixes - DG1 display fix - IVB/BYT clear residuals security fix again - make i915 mitigations options via parameter - HSW GT1 GPU hangs fixes - DG1 workaround hang fixes - TGL DMAR hang avoidance - Lots of GT fixes - follow on fixes for residuals clear - gen7 per-engine-reset support - HDCP2.2 + HDCP1.4 GEN12 DP MST support - TGL clear color support - backlight refactoring - VRR/Adaptive sync enabling on DP/EDP for TGL+ - async flips for all ilk+ amdgpu: - rework IH ring handling (Vega/Navi) - rework HDP handling (Vega/Navi) - swSMU updates for renoir/vangogh - Sienna Cichild overdrive support - FP16 on DCE8-11 support - GPU reset on navy flounder/vangogh - SMU profile fixes for APU - SR-IOV fixes - Vangogh SMU fixes - fan speed control fixes amdkfd: - config handling fix - buffer free fix - recursive lock warnings fix nouveau: - Turing MMU fault recovery fixes - mDP connectors reporting fix - audio locking fixes - rework engines/instances code to support new scheme tegra: - VIC newer firmware support - display/gr2d fixes for older tegra - pm reference leak fix mediatek: - SOC MT8183 support - decouple sub driver + share mtk mutex driver radeon: - PCI resource fix for some platforms ingenic: - pm support - 8-bit delta RGB panels vmwgfx: - managed driver helpers vc4: - BCM2711 DSI1 support - converted to atomic helpers - enable 10/12 bpc outputs - gem prime mmap helpers - CEC fix omap: - use degamma table - CTM support - rework DSI support imx: - stack usage fixes - drm managed support - imx-tve clock provider leak fix - rcar-du: - default mode fixes - conversion to managed API hisilicon: - use simple encoder vkms: - writeback connector support d3: - BT2020 support" * tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drm: (1459 commits) drm/amdgpu: Set reference clock to 100Mhz on Renoir (v2) drm/radeon: OLAND boards don't have VCE drm/amdkfd: Fix recursive lock warnings drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth() drm/amd/display: Fix potential integer overflow drm/amdgpu/display: remove hdcp_srm sysfs on device removal drm/amdgpu: fix CGTS_TCC_DISABLE register offset on gfx10.3 drm/i915/gt: Correct surface base address for renderclear drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling drm/nouveau/top/ga100: initial support drm/nouveau/top: add ioctrl/nvjpg drm/nouveau/privring: rename from ibus drm/nouveau/nvkm: remove nvkm_subdev.index drm/nouveau/nvkm: determine subdev id/order from layout drm/nouveau/vic: switch to instanced constructor drm/nouveau/sw: switch to instanced constructor drm/nouveau/sec2: switch to instanced constructor drm/nouveau/sec: switch to instanced constructor drm/nouveau/pm: switch to instanced constructor drm/nouveau/nvenc: switch to instanced constructor ...
2021-02-17drm: Switch to %p4cc format modifierSakari Ailus1-4/+2
Switch DRM drivers from drm_get_format_name() to %p4cc. This gets rid of a large number of temporary variables at the same time. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-4-sakari.ailus@linux.intel.com
2021-02-10drm/sun4i: dw-hdmi: Fix max. frequency for H6Jernej Skrabec1-4/+2
It turns out that reasoning for lowering max. supported frequency is wrong. Scrambling works just fine. Several now fixed bugs prevented proper functioning, even with rates lower than 340 MHz. Issues were just more pronounced with higher frequencies. Fix that by allowing max. supported frequency in HW and fix the comment. Fixes: cd9063757a22 ("drm/sun4i: DW HDMI: Lower max. supported rate for H6") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-6-jernej.skrabec@siol.net
2021-02-10drm/sun4i: Fix H6 HDMI PHY configurationJernej Skrabec1-17/+9
As it turns out, vendor HDMI PHY driver for H6 has a pretty big table of predefined values for various pixel clocks. However, most of them are not useful/tested because they come from reference driver code. Vendor PHY driver is concerned with only few of those, namely 27 MHz, 74.25 MHz, 148.5 MHz, 297 MHz and 594 MHz. These are all frequencies for standard CEA modes. Fix sun50i_h6_cur_ctr and sun50i_h6_phy_config with the values only for aforementioned frequencies. Table sun50i_h6_mpll_cfg doesn't need to be changed because values are actually frequency dependent and not so much SoC dependent. See i.MX6 documentation for explanation of those values for similar PHY. Fixes: c71c9b2fee17 ("drm/sun4i: Add support for Synopsys HDMI PHY") Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-5-jernej.skrabec@siol.net
2021-02-10drm/sun4i: dw-hdmi: always set clock rateJernej Skrabec2-4/+1
As expected, HDMI controller clock should always match pixel clock. In the past, changing HDMI controller rate would seemingly worsen situation. However, that was the result of other bugs which are now fixed. Fix that by removing set_rate quirk and always set clock rate. Fixes: 40bb9d3147b2 ("drm/sun4i: Add support for H6 DW HDMI controller") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-4-jernej.skrabec@siol.net
2021-02-10drm/sun4i: tcon: set sync polarity for tcon1 channelJernej Skrabec2-0/+31
Channel 1 has polarity bits for vsync and hsync signals but driver never sets them. It turns out that with pre-HDMI2 controllers seemingly there is no issue if polarity is not set. However, with HDMI2 controllers (H6) there often comes to de-synchronization due to phase shift. This causes flickering screen. It's safe to assume that similar issues might happen also with pre-HDMI2 controllers. Solve issue with setting vsync and hsync polarity. Note that display stacks with tcon top have polarity bits actually in tcon0 polarity register. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-3-jernej.skrabec@siol.net
2021-02-10drm/sun4i: Add alpha property for sun8i and sun50i VI layerRoman Stratiienko2-8/+51
DE3.0 VI layers supports plane-global alpha channel. DE2.0 FCC block have GLOBAL_ALPHA register that can be used as alpha source for blender. Add alpha property to the DRM plane and connect it to the corresponding registers in the mixer. Do not add alpha property for V3s SOC that have DE2.0 and 2 VI planes. Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210128113940.347013-3-r.stratiienko@gmail.com
2021-02-10drm/sun4i: Add alpha property for sun8i UI layerRoman Stratiienko2-0/+34
DE2.0 and DE3.0 UI layers supports plane-global alpha channel. Add alpha property to the DRM plane and connect it to the corresponding registers in mixer. Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210128113940.347013-2-r.stratiienko@gmail.com
2021-01-14drm/sun4i: tcon: fix inverted DCLK polarityGiulio Benetti2-19/+3
During commit 88bc4178568b ("drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags") DRM_BUS_FLAG_* macros have been changed to avoid ambiguity but just because of this ambiguity previous DRM_BUS_FLAG_PIXDATA_(POS/NEG)EDGE were used meaning _SAMPLE_ not _DRIVE_. This leads to DLCK inversion and need to fix but instead of swapping phase values, let's adopt an easier approach Maxime suggested: It turned out that bit 26 of SUN4I_TCON0_IO_POL_REG is dedicated to invert DCLK polarity and this makes things really easier than before. So let's handle DCLK polarity by adding SUN4I_TCON0_IO_POL_DCLK_DRIVE_NEGEDGE as bit 26 and activating according to bus_flags the same way it is done for all the other signals polarity. Fixes: 88bc4178568b ("drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags") Suggested-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210114081732.9386-1-giulio.benetti@benettiengineering.com
2021-01-13drm/sun4i: Add support for BT2020 to DE3Jernej Skrabec2-1/+13
DE3 supports 10-bit formats, so it's only naturally to also support BT2020 encoding. Add support for it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210110201947.3611649-4-jernej.skrabec@siol.net
2021-01-13drm/sun4i: de2/de3: Remove redundant CSC matricesJernej Skrabec1-65/+34
YUV to RGB matrices are almost identical to YVU to RGB matrices. They only have second and third column reversed. Do that reversion in code in order to lower amount of static data and redundancy. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210110201947.3611649-3-jernej.skrabec@siol.net
2021-01-13drm/sun4i: csc: Rework DE3 CSC macrosJernej Skrabec2-5/+3
Rework DE3 CSC macros to take just one coordinate instead of two. This will make its usage easier in subsequent commit. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210110201947.3611649-2-jernej.skrabec@siol.net
2020-12-17Merge tag 'arm-soc-drivers-5.11' of ↵Linus Torvalds1-19/+0
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are a couple of subsystems maintained by other people that merge their drivers through the SoC tree, those changes include: - The SCMI firmware framework gains support for sensor notifications and for controlling voltage domains. - A large update for the Tegra memory controller driver, integrating it better with the interconnect framework - The memory controller subsystem gains support for Mediatek MT8192 - The reset controller framework gains support for sharing pulsed resets For Soc specific drivers in drivers/soc, the main changes are - The Allwinner/sunxi MBUS gets a rework for the way it handles dma_map_ops and offsets between physical and dma address spaces. - An errata fix plus some cleanups for Freescale Layerscape SoCs - A cleanup for renesas drivers regarding MMIO accesses. - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC identification. - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and SDX55. - A rework of the TI AM33xx 'genpd' power domain support to use information from DT instead of platform data - Support for TI AM64x SoCs - Allow building some Amlogic drivers as modules instead of built-in Finally, there are numerous cleanups and smaller bug fixes for Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips, Renesas, and Xilinx SoCs" * tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits) soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS firmware: xilinx: Properly align function parameter firmware: xilinx: Add a blank line after function declaration firmware: xilinx: Remove additional newline firmware: xilinx: Fix kernel-doc warnings firmware: xlnx-zynqmp: fix compilation warning soc: xilinx: vcu: add missing register NUM_CORE soc: xilinx: vcu: use vcu-settings syscon registers dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding soc: xilinx: vcu: drop useless success message clk: samsung: mark PM functions as __maybe_unused soc: samsung: exynos-chipid: initialize later - with arch_initcall soc: samsung: exynos-chipid: order list of SoCs by name memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe() memory: ti-emif-sram: only build for ARMv7 memory: tegra30: Support interconnect framework memory: tegra20: Support hardware versioning and clean up OPP table initialization dt-bindings: memory: tegra20-emc: Document opp-supported-hw property soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe() reset-controller: ti: force the write operation when assert or deassert ...
2020-12-14Merge tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2-7/+12
Pull drm updates from Dave Airlie: "Not a huge amount of big things here, AMD has support for a few new HW variants (vangogh, green sardine, dimgrey cavefish), Intel has some more DG1 enablement. We have a few big reworks of the TTM layers and interfaces, GEM and atomic internal API reworks cross tree. fbdev is marked orphaned in here as well to reflect the current reality. core: - documentation updates - deprecate DRM_FORMAT_MOD_NONE - atomic crtc enable/disable rework - GEM convert drivers to gem object functions - remove SCATTER_LIST_MAX_SEGMENT sched: - avoid infinite waits ttm: - remove AGP support - don't modify caching for swapout - ttm pinning rework - major TTM reworks - new backend allocator - multihop support vram-helper: - top down BO placement fix - TTM changes - GEM object support displayport: - DP 2.0 DPCD prep work - DP MST extended DPCD caps fbdev: - mark as orphaned amdgpu: - Initial Vangogh support - Green Sardine support - Dimgrey Cavefish support - SG display support for renoir - SMU7 improvements - gfx9+ modiifier support - CI BACO fixes radeon: - expose voltage via hwmon on SUMO amdkfd: - fix unique id handling i915: - more DG1 enablement - bigjoiner support - integer scaling filter support - async flip support - ICL+ DSI command mode - Improve display shutdown - Display refactoring - eLLC machine fbdev loading fix - dma scatterlist fixes - TGL hang fixes - eLLC display buffer caching on SKL+ - MOCS PTE seeting for gen9+ msm: - Shutdown hook - GPU cooling device support - DSI 7nm and 10nm phy/pll updates - sm8150/sm2850 DPU support - GEM locking re-work - LLCC system cache support aspeed: - sysfs output config support ast: - LUT fix - new display mode gma500: - remove 2d framebuffer accel panfrost: - move gpu reset to a worker exynos: - new HDMI mode support mediatek: - MT8167 support - yaml bindings - MIPI DSI phy code moved etnaviv: - new perf counter - more lockdep annotation hibmc: - i2c DDC support ingenic: - pixel clock reset fix - reserved memory support - allow both DMA channels at once - different pixel format support - 30/24/8-bit palette modes tilcdc: - don't keep vblank irq enabled vc4: - new maintainer added - DSI registration fix virtio: - blob resource support - host visible and cross-device support - uuid api support" * tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm: (1754 commits) drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs drm/amdgpu: fix size calculation with stolen vga memory drm/amdgpu: remove amdgpu_ttm_late_init and amdgpu_bo_late_init drm/amdgpu: free the pre-OS console framebuffer after the first modeset drm/amdgpu: enable runtime pm using BACO on CI dGPUs drm/amdgpu/cik: enable BACO reset on Bonaire drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven drm/amd/pm: remove one unsupported smu function for vangogh drm/amd/display: setup system context for APUs drm/amd/display: add S/G support for Vangogh drm/amdkfd: Fix leak in dmabuf import drm/amdgpu: use AMDGPU_NUM_VMID when possible drm/amdgpu: fix sdma instance fw version and feature version init drm/amd/pm: update driver if version for dimgrey_cavefish drm/amd/display: 3.2.115 drm/amd/display: [FW Promotion] Release 0.0.45 drm/amd/display: Revert DCN2.1 dram_clock_change_latency update drm/amd/display: Enable gpu_vm_support for dcn3.01 drm/amd/display: Fixed the audio noise during mode switching with HDCP mode on drm/amd/display: Add wm table for Renoir ...
2020-11-27Backmerge tag 'v5.10-rc2' into arm/driversArnd Bergmann2-31/+11
The SCMI pull request for the arm/drivers branch requires v5.10-rc2 because of dependencies with other git trees, so merge that in here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-19Merge tag 'drm/sun4i-dma-fix-pull-request' of ↵Maxime Ripard1-1/+7
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-misc-fixes Fix for drm/sun4i shared with arm-soc This patch is a preliminary fix that will conflict with subsequent work merged through arm-soc. Signed-off-by: Maxime Ripard <maxime@cerno.tech> # gpg: Signature made Wed 18 Nov 2020 09:51:53 AM CET # gpg: using EDDSA key 5C1337A45ECA9AEB89060E9EE3EF0D6F671851C5 # gpg: Good signature from "Maxime Ripard <maxime.ripard@anandra.org>" [unknown] # gpg: aka "Maxime Ripard <mripard@kernel.org>" [unknown] # gpg: aka "Maxime Ripard (Work Address) <maxime.ripard@bootlin.com>" [unknown] # gpg: aka "Maxime Ripard (Work Address) <maxime@bootlin.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: BE56 75C3 7E81 8C8B 5764 241C 254B CFC5 6BF6 CE8D # Subkey fingerprint: 5C13 37A4 5ECA 9AEB 8906 0E9E E3EF 0D6F 6718 51C5 From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201118090455.sznrgpduuytlc22k@gilmour.lan
2020-11-18drm/sun4i: backend: Fix probe failure with multiple backendsMaxime Ripard1-1/+7
Commit e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset") introduced a regression in our code since the second backed to probe will now get -EINVAL back from dma_direct_set_offset and will prevent the entire DRM device from probing. Ignore -EINVAL as a temporary measure to get it back working, before removing that call entirely. Fixes: e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-11-18drm/sun4i: backend: Remove the MBUS quirksMaxime Ripard1-19/+0
Now that the MBUS quirks are applied by our global notifier, we can remove them from our DRM driver. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-11-17drm/sun4i: dw-hdmi: fix error return code in sun8i_dw_hdmi_bind()Xiongfeng Wang1-0/+1
Fix to return a negative error code from the error handling case instead of 0 in function sun8i_dw_hdmi_bind(). Fixes: b7c7436a5ff0 ("drm/sun4i: Implement A83T HDMI driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/1605488969-5211-1-git-send-email-wangxiongfeng2@huawei.com
2020-11-06drm/<drivers>: Constify struct drm_driverDaniel Vetter1-1/+1
Only the following drivers aren't converted: - amdgpu, because of the driver_feature mangling due to virt support. Subsequent patch will address this. - nouveau, because DRIVER_ATOMIC uapi is still not the default on the platforms where it's supported (i.e. again driver_feature mangling) - vc4, again because of driver_feature mangling - qxl, because the ioctl table is somewhere else and moving that is maybe a bit too much, hence the num_ioctls assignment prevents a const driver structure. - arcpgu, because that is stuck behind a pending tiny-fication series from me. - legacy drivers, because legacy requires non-const drm_driver. Note that for armada I also went ahead and made the ioctl array const. Only cc'ing the driver people who've not been converted (everyone else is way too much). v2: Fix one misplaced const static, should be static const (0day) v3: - Improve commit message (Sam) Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: kernel test robot <lkp@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Eric Anholt <eric@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
2020-11-02drm/atomic: Pass the full state to CRTC atomic begin and flushMaxime Ripard1-2/+4
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the CRTC's atomic_begin and atomic_flush. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_begin(crtc, old_crtc_state); + FUNCS->atomic_begin(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_flush(crtc, old_crtc_state); + FUNCS->atomic_flush(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_begin(crtc, crtc_state); + FUNCS->atomic_begin(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_flush(crtc, crtc_state); + FUNCS->atomic_flush(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_begin)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_begin)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_flush)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_flush)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_begin = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_flush = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-2-maxime@cerno.tech
2020-11-02drm/atomic: Pass the full state to CRTC atomic_checkMaxime Ripard1-2/+5
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the CRTC's atomic_check. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier ret, f; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <... - ret = FUNCS->atomic_check(crtc, crtc_state); + ret = FUNCS->atomic_check(crtc, state); ...> } @@ identifier crtc, new_state; @@ struct drm_crtc_helper_funcs { ... - int (*atomic_check)(struct drm_crtc *crtc, struct drm_crtc_state *new_state); + int (*atomic_check)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ static struct drm_crtc_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @ ignores_new_state @ identifier crtc_atomic_func.func; identifier crtc, new_state; @@ int func(struct drm_crtc *crtc, struct drm_crtc_state *new_state) { ... when != new_state } @ adds_new_state depends on crtc_atomic_func && !ignores_new_state @ identifier crtc_atomic_func.func; identifier crtc, new_state; @@ int func(struct drm_crtc *crtc, struct drm_crtc_state *new_state) { + struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ int func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ int func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier new_state; identifier crtc; @@ int func(struct drm_crtc *crtc, - struct drm_crtc_state *new_state + struct drm_atomic_state *state ) { ... } @@ identifier new_state; identifier crtc; @@ int vmw_du_crtc_atomic_check(struct drm_crtc *crtc, - struct drm_crtc_state *new_state + struct drm_atomic_state *state ) { + struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc); ... } @@ identifier new_state; identifier crtc; @@ int vmw_du_crtc_atomic_check(struct drm_crtc *crtc, - struct drm_crtc_state *new_state + struct drm_atomic_state *state ); @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-1-maxime@cerno.tech
2020-11-02Merge drm/drm-next into drm-misc-nextMaxime Ripard5-34/+20
Daniel needs -rc2 in drm-misc-next to merge some patches Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-10-26drm/sun4i: frontend: Fix the scaler phase on A33Maxime Ripard1-1/+1
The A33 has a different phase parameter in the Allwinner BSP on the channel1 than the one currently applied. Fix this. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20201015093642.261440-3-maxime@cerno.tech
2020-10-26drm/sun4i: frontend: Reuse the ch0 phase for RGB formatsMaxime Ripard1-3/+5
When using the scaler on the A10-like frontend with single-planar formats, the current code will setup the channel 0 filter (used for the R or Y component) with a different phase parameter than the channel 1 filter (used for the G/B or U/V components). This creates a bleed out that keeps repeating on of the last line of the RGB plane across the rest of the display. The Allwinner BSP either applies the same phase parameter over both channels or use a separate one, the condition being whether the input format is YUV420 or not. Since YUV420 is both subsampled and multi-planar, and since YUYV is subsampled but single-planar, we can rule out the subsampling and assume that the condition is actually whether the format is single or multi-planar. And it looks like applying the same phase parameter over both channels for single-planar formats fixes our issue, while we keep the multi-planar formats working properly. Reported-by: Taras Galchenko <tpgalchenko@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20201015093642.261440-2-maxime@cerno.tech
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-12 06:04:35 +0300