summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/rcar-du
AgeCommit message (Collapse)AuthorFilesLines
2017-03-10Merge tag 'media/v4.11-2' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Media regression fixes: - serial_ir: fix a Kernel crash during boot on Kernel 4.11-rc1, due to an IRQ code called too early - other IR regression fixes at lirc and at the raw IR decoding - a deadlock fix at the RC nuvoton driver - fix another issue with DMA on stack at dw2102 driver There's an extra patch there that change a driver interface for the SoC VSP1 driver, with is shared between the DRM and V4L2 driver. The patch itself is trivial, and was acked by David Arlie" * tag 'media/v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] v4l: vsp1: Adapt vsp1_du_setup_lif() interface to use a structure [media] dw2102: don't do DMA on stack [media] rc: protocol is not set on register for raw IR devices [media] rc: raw decoder for keymap protocol is not loaded on register [media] rc: nuvoton: fix deadlock in nvt_write_wakeup_codes [media] lirc: fix dead lock between open and wakeup_filter [media] serial_ir: ensure we're ready to receive interrupts
2017-03-07[media] v4l: vsp1: Adapt vsp1_du_setup_lif() interface to use a structureKieran Bingham1-2/+6
The interface to configure the LIF in the VSP1 requires adapting the function prototype for any changes. This makes extending the interface difficult. Change the function prototype to pass a structure which can be easily extended. This changes the means of disabling the pipeline, by now passing a NULL configuration rather than passing either a 0 width or height. [Fixed kerneldoc, made vsp1_du_setup_lif() cfg argument const] Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-02drm: Rely on mode_config data for fb_helper initializationGabriel Krisman Bertazi1-1/+1
Instead of receiving the num_crts as a parameter, we can read it directly from the mode_config structure. I audited the drivers that invoke this helper and I believe all of them initialize the mode_config struct accordingly, prior to calling the fb_helper. I used the following coccinelle hack to make this transformation, except for the function headers and comment updates. The first and second rules are split because I couldn't find a way to remove the unused temporary variables at the same time I removed the parameter. // <smpl> @r@ expression A,B,D,E; identifier C; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ expression A,B,C,D,E; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ identifier r.C; type T; expression V; @@ - T C; <... when != C - C = V; ...> // </smpl> Changes since v1: - Rebased on top of the tip of drm-misc-next. - Remove mention to sti since a proper fix got merged. Suggested-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk
2016-12-18drm: bridge: Link encoder and bridge in core codeLaurent Pinchart1-4/+1
Instead of linking encoders and bridges in every driver (and getting it wrong half of the time, as many drivers forget to set the drm_bridge encoder pointer), do so in core code. The drm_bridge_attach() function needs the encoder and optional previous bridge to perform that task, update all the callers. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Stefan Agner <stefan@agner.ch> # For DCU Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # For atmel-hlcdc Acked-by: Vincent Abriou <vincent.abriou@st.com> # For STI Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # For sun4i Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> # For hisilicon Acked-by: Jyri Sarha <jsarha@ti.com> # For tilcdc Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-4-git-send-email-laurent.pinchart+renesas@ideasonboard.com
2016-12-18drm: Don't include <drm/drm_encoder.h> in <drm/drm_crtc.h>Laurent Pinchart1-0/+1
<drm/drm_crtc.h> used to define most of the in-kernel KMS API. It has now been split into separate files for each object type, but still includes most other KMS headers to avoid breaking driver compilation. As a step towards fixing that problem, remove the inclusion of <drm/drm_encoder.h> from <drm/drm_crtc.h> and include it instead where appropriate. Also remove the forward declarations of the drm_encoder and drm_encoder_helper_funcs structures from <drm/drm_crtc.h> as they're not needed in the header. <drm/drm_encoder.h> now has to include <drm/drm_mode.h> and contain a forward declaration of struct drm_encoder in order to allow including it as the first header in a compilation unit. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sinclair Yeh <syeh@vmware.com> # For vmwgfx Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com
2016-12-15drm: Nuke fb->pixel_formatVille Syrjälä2-4/+4
Replace uses of fb->pixel_format with fb->format->format. Less duplicated information is a good thing. Note that coccinelle failed to eliminate the "/* fourcc format */" comment from drm_framebuffer.h, so I had to do that part manually. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - a->pixel_format + a->format->format | - b.pixel_format + b.format->format ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - a->fb->pixel_format + a->fb->format->format | - b.fb->pixel_format + b.fb->format->format ) @@ struct drm_crtc *CRTC; @@ ( - CRTC->primary->fb->pixel_format + CRTC->primary->fb->format->format | - CRTC->primary->state->fb->pixel_format + CRTC->primary->state->fb->format->format ) @@ struct drm_mode_set *set; @@ ( - set->fb->pixel_format + set->fb->format->format | - set->crtc->primary->fb->pixel_format + set->crtc->primary->fb->format->format ) @@ @@ struct drm_framebuffer { ... - uint32_t pixel_format; ... }; v2: Fix commit message (Laurent) Rebase due to earlier removal of many fb->pixel_format uses, including the 'fb->format = drm_format_info(fb->format->format);' snafu v3: Adjusted the semantic patch a bit and regenerated due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-01drm: Make the connector .detect() callback optionalLaurent Pinchart1-7/+0
Many drivers (21 to be exact) create connectors that are always connected (for instance to an LVDS or DSI panel). Instead of forcing them to implement a dummy .detect() handler, make the callback optional and consider the connector as always connected in that case. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jyri Sarha <jsarha@ti.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Vincent Abriou <vincent.abriou@st.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [seanpaul fixed small conflict in rcar-du/rcar_du_lvdscon.c] Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-11-16Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/media into drm-nextDave Airlie8-57/+98
rcar-du -next branch. * 'drm/next/du' of git://linuxtv.org/pinchartl/media: drm: rcar-du: Fix LVDS start sequence on Gen3 drm: rcar-du: Fix H/V sync signal polarity configuration drm: rcar-du: Fix display timing controller parameter drm: rcar-du: Fix dot clock routing configuration drm: rcar-du: Add R8A7796 support drm: rcar-du: Add R8A7792 support drm: rcar-du: Simplify and fix probe error handling drm: rcar-du: Fix crash in encoder failure error path drm: rcar-du: Remove memory allocation error message drm: rcar-du: Remove test for impossible error condition drm: rcar-du: Bring HDMI encoder comments in line with the driver drm: rcar-du: Constify node argument to rcar_du_lvds_connector_init() video: of: Constify node argument to display timing functions
2016-11-15drm: rcar-du: Fix LVDS start sequence on Gen3Koji Matsuoka1-7/+8
According to the latest revision of the datasheet, the LVDS I/O pins must be enabled before starting the PLL. Fix it. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-11-15drm: rcar-du: Fix H/V sync signal polarity configurationKoji Matsuoka1-2/+2
The VSL and HSL bits in the DSMR register set the corresponding horizontal and vertical sync signal polarity to active high. The code got it the wrong way around, fix it. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-11-15drm: rcar-du: Fix display timing controller parameterKoji Matsuoka1-1/+1
There is a bug in the setting of the DES (Display Enable Signal) register. This current setting occurs 1 dot left shift. The DES register should be set minus one value about the specifying value with H/W specification. This patch corrects it. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-11-15drm: rcar-du: Fix dot clock routing configurationLaurent Pinchart1-9/+13
Dot clock routing is setup through different registers depending on the DU generation. The code has been designed for Gen2 and hasn't been updated since. This works thanks to good reset default value, but isn't very safe. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-11-15drm: rcar-du: Add R8A7796 supportLaurent Pinchart1-0/+25
Document the R8A7796-specific DT bindings and support them in the driver. The HDMI output is currently not supported. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-11-15drm: rcar-du: Add R8A7792 supportSergei Shtylyov1-0/+22
Add support for the R8A7792 DU; it has 2 DPAD (RGB) outputs. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-11-15drm: rcar-du: Simplify and fix probe error handlingLaurent Pinchart2-20/+17
It isn't safe to call drm_dev_unregister() without first initializing mode setting with drm_mode_config_init(). This leads to a crash if either IO memory can't be remapped or vblank initialization fails. Fix this by reordering the initialization sequence. Move vblank initialization after the drm_mode_config_init() call, and move IO remapping before drm_dev_alloc() to avoid the need to perform clean up in case of failure. While at it remove the explicit drm_vblank_cleanup() call from rcar_du_remove() as the drm_dev_unregister() function already cleans up vblank. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-11-14drm: rcar-du: Fix crash in encoder failure error pathLaurent Pinchart1-5/+5
When an encoder fails to initialize the driver prints an error message to the kernel log. The message contains the name of the encoder's DT node, which is NULL for internal encoders. Use the of_node_full_name() macro to avoid dereferencing a NULL pointer, print the output number to add more context to the error, and make sure we still own a reference to the encoder's DT node by delaying the of_node_put() call. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2016-11-14drm: rcar-du: Remove memory allocation error messageLaurent Pinchart1-3/+1
Memory allocation failures print messages to the kernel log, there's no need to print an extra one. Remove the duplicate message. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2016-11-14drm: rcar-du: Remove test for impossible error conditionLaurent Pinchart1-6/+0
The driver has lost platform data support a long time ago. R-Car DU devices can only be instantiated through DT now, making it impossible to have a NULL DT node pointer. Remove the error check. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2016-11-14drm: rcar-du: Bring HDMI encoder comments in line with the driverLaurent Pinchart1-2/+2
Capitalize acronyms and use determiners and punctuation. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2016-11-14drm: rcar-du: Constify node argument to rcar_du_lvds_connector_init()Laurent Pinchart2-2/+2
The node passed as a pointer to the rcar_du_lvds_connector_init() function is never modified, make it const. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2016-11-11Merge tag 'topic/drm-misc-2016-11-10' of ↵Dave Airlie1-2/+0
git://anongit.freedesktop.org/drm-intel into drm-next - better atomic state debugging from Rob - fence prep from gustavo - sumits flushed out his backlog of pending dma-buf/fence patches from various people - drm_mm leak debugging plus trying to appease Kconfig (Chris) - a few misc things all over * tag 'topic/drm-misc-2016-11-10' of git://anongit.freedesktop.org/drm-intel: (35 commits) drm: Make DRM_DEBUG_MM depend on STACKTRACE_SUPPORT drm/i915: Restrict DRM_DEBUG_MM automatic selection drm: Restrict stackdepot usage to builtin drm.ko drm/msm: module param to dump state on error irq drm/msm/mdp5: add atomic_print_state support drm/atomic: add debugfs file to dump out atomic state drm/atomic: add new drm_debug bit to dump atomic state drm: add helpers to go from plane state to drm_rect drm: add helper for printing to log or seq_file drm: helper macros to print composite types reservation: revert "wait only with non-zero timeout specified (v3)" v2 drm/ttm: fix ttm_bo_wait dma-buf/fence: revert "don't wait when specified timeout is zero" (v2) dma-buf/fence: make timeout handling in fence_default_wait consistent (v2) drm/amdgpu: add the interface of waiting multiple fences (v4) dma-buf: return index of the first signaled fence (v2) MAINTAINERS: update Sync File Framework files dma-buf/sw_sync: put fence reference from the fence creation dma-buf/sw_sync: mark sync_timeline_create() static drm: Add stackdepot include for DRM_DEBUG_MM ...
2016-11-07Backmerge tag 'v4.9-rc4' into drm-nextDave Airlie1-2/+10
Linux 4.9-rc4 This is needed for nouveau development.
2016-11-02drm: define drm_compat_ioctl NULL on CONFIG_COMPAT=n and reduce #ifdefsJani Nikula1-2/+0
If we define drm_compat_ioctl NULL on CONFIG_COMPAT=n, we don't have to check for the config everywhere. Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1478014844-27454-1-git-send-email-jani.nikula@intel.com
2016-10-26drm: Don't force all planes to be added to the state due to zposVille Syrjälä1-2/+10
We don't want all planes to be added to the state whenever a plane with fixed zpos gets enabled/disabled. This is true especially for eg. cursor planes on i915, as we want cursor updates to go through w/o throttling. Same holds for drivers that don't support zpos at all (i915 actually falls into this category right now since we've not yet added zpos support). Allow drivers more freedom by letting them deal with zpos themselves instead of doing it in drm_atomic_helper_check_planes() unconditionally. Let's just inline the required calls into all the driver that currently depend on this. v2: Inline the stuff into the drivers instead of adding another helper, document things better (Daniel) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lyude <cpaul@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: stable@vger.kernel.org Fixes: 44d1240d006c ("drm: add generic zpos property") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1476111056-12734-1-git-send-email-ville.syrjala@linux.intel.com
2016-10-17drm: Add reference counting to drm_atomic_stateChris Wilson1-1/+2
drm_atomic_state has a complicated single owner model that tracks the single reference from allocation through to destruction on another thread - or perhaps on a local error path. We can simplify this tracking by using reference counting (at a cost of a few more atomics). This is even more beneficial when the lifetime of the state becomes more convoluted than being passed to a single worker thread for the commit. v2: Double check !intel atomic_commit functions for missing gets v3: Update kerneldocs Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161014121833.439-27-chris@chris-wilson.co.uk
2016-09-22drm: Don't swallow error codes in drm_dev_alloc()Tom Gundersen1-2/+2
There are many reasons other than ENOMEM that drm_dev_init() can fail. Return ERR_PTR rather than NULL to be able to distinguish these in the caller. Signed-off-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20160921145919.13754-2-teg@jklm.no
2016-08-29drm/atomic-helper: Add NO_DISABLE_AFTER_MODESET flag support for plane commitLiu Ying1-1/+2
Drivers may set the NO_DISABLE_AFTER_MODESET flag in the 'flags' parameter of the helper drm_atomic_helper_commit_planes() if the relevant display controllers(e.g., IPUv3 for imx-drm) require to disable a CRTC's planes when the CRTC is disabled. The helper would skip the ->atomic_disable call for a plane if the CRTC of the old plane state needs a modesetting operation. Of course, the drivers need to disable the planes in their CRTC disable callbacks since no one else would do that. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <linux@armlinux.org.uk> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1472461923-14364-1-git-send-email-gnuiyl@gmail.com
2016-08-08drm: rcar-du: Link HDMI encoder with bridgeLaurent Pinchart1-0/+1
The conversion of the rcar-du driver from the I2C slave encoder to the DRM bridge API left the HDMI encoder's bridge pointer NULL, preventing the bridge from being handled automatically by the DRM core. Fix it. Fixes: 1d926114d8f4 ("drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-07-29drm: rcar: use generic code for managing zpos plane propertyBenjamin Gaignard6-25/+8
version 6: rebased patch on top rcar-du changes for zpos version 4: fix null pointer issue while setting zpos in plane reset function This patch replaces zpos property handling custom code in rcar DRM driver with calls to generic DRM code. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com>
2016-07-29Merge remote-tracking branch 'media_tree/vsp1' into generic-zpos-v8Benjamin Gaignard2-20/+27
2016-07-27Merge tag 'topic/drm-misc-2016-07-22' of ↵Dave Airlie1-1/+0
git://anongit.freedesktop.org/drm-intel into drm-next Suddenly everyone shows up with their trivial patch series! - piles of if (!ptr) check removals from Markus Elfring - more of_node_put fixes from Peter Chen - make fbdev support really optional in all drivers (except vmwgfx), somehow this fell through the cracks when we did all the hard prep work a while ago. Patches from Tobias Jakobi. - leftover patches for the connector reg/unreg cleanup (required that I backmerged drm-next) from Chris - last vgem fence patch from Chris - fix up warnings in the new sphinx gpu docs build - misc other small bits * tag 'topic/drm-misc-2016-07-22' of git://anongit.freedesktop.org/drm-intel: (57 commits) GPU-DRM-Exynos: Delete an unnecessary check before the function call "vunmap" GPU-DRM-sun4i: Delete an unnecessary check before drm_fbdev_cma_hotplug_event() drm/atomic: Delete an unnecessary check before drm_property_unreference_blob() drm/rockchip: analogix_dp: add missing clk_disable_unprepare() on error drm: drm_connector->s/connector_id/index/ for consistency drm/virtio: Fix non static symbol warning drm/arc: Remove redundant dev_err call in arcpgu_load() drm/arc: Fix some sparse warnings drm/vgem: Fix non static symbol warning drm/doc: Spinx leftovers drm/dp-mst: Missing kernel doc drm/dp-mst: Remove tx_down_in_progress drm/doc: Fix missing kerneldoc for drm_dp_helper.c drm: Extract&Document drm_irq.h drm/doc: document all the properties in drm_mode_config drm/drm-kms.rst: Remove unused drm_fourcc.h include directive drm/doc: Add kerneldoc for @index drm: Unexport drm_connector_unregister_all() drm/sun4i: Remove redundant call to drm_connector_unregister_all() drm/ttm: Delete an unnecessary check before the function call "ttm_tt_destroy" ...
2016-07-19Merge branch 'drm_bridge_for_4.8' of https://github.com/boddob/linux into ↵Dave Airlie6-207/+22
drm-next This is an update to the previous drm bridge pull request. The ADV7511 driver's conversion from slave encoder to bridge meant that its users (the rcar-du kms driver) should use the bridge interface too. This pull request now also contains a commit that updates the rcar-du's hdmi encoder interface from slave encoder to bridge. The other updates are as before: - Converts the ADV7511 i2c slave encoder driver to a bridge driver. Adds support for the ADV7533 bridge chip. - Add bridge driver for TC358767 (DSI/DPI to eDP) encoder chips. * 'drm_bridge_for_4.8' of https://github.com/boddob/linux: drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder drm/bridge: tc358767: Add DPI to eDP bridge driver dt-bindings: tc358767: add DT documentation dt-bindings: drm/bridge: Update bindings for ADV7533 drm/bridge: adv7533: Change number of DSI lanes dynamically drm/bridge: adv7533: Use internal timing generator drm/bridge: adv7533: Create a MIPI DSI device drm/bridge: adv7533: Initial support for ADV7533 drm/bridge: adv7511: Fix mutex deadlock when interrupts are disabled drm/i2c: adv7511: Move to bridge folder drm/i2c: adv7511: Convert to drm_bridge
2016-07-18drm: rcar-du: Remove i2c slave encoder interface for hdmi encoderArchit Taneja6-207/+22
The hdmi output in rcar-du uses the i2c slave encoder interface to link to the adv7511 encoder chip. The kms driver creates encoder and connector entities that internally uses the drm_encoder_slave_funcs ops provided by the slave encoder driver. Change the driver such that it expects a bridge entity instead of a slave encoder. The hdmi connector code isn't needed anymore as we expect the adv7511 bridge driver to create/manage the connector. Note that the kms driver still expects a connector node for hdmi to be present in DT. This node has no connection to the connector created by the bridge driver. Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Archit Taneja <architt@codeaurora.org>
2016-07-15drm/rcar-du: make fbdev support really optionalTobias Jakobi1-1/+0
Currently enabling R-Car DRM support automatically pulls in fbdev dependency. However this dep is unnecessary since DRM core already handles this for us (DRM_FBDEV_EMULATION). Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-07-12drm/rcar-du: use drm_crtc_handle_vblank()Gustavo Padovan1-1/+1
Remove legacy usage of drm_handle_vblank() Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1467677092-5089-5-git-send-email-gustavo@padovan.org
2016-06-24Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/media into drm-nextDave Airlie2-6/+7
some rcar-du fixes. * 'drm/next/du' of git://linuxtv.org/pinchartl/media: drm: rcar-du: error message is not needed for EPROBE_DEFER drm: rcar-du: error message is not needed for drm_vblank_init() rcar-du: add/rename DEFR6 TCON bits
2016-06-21drm: Don't call drm_dev_set_unique from platform driversDaniel Vetter1-2/+0
Since commit e112e593b215c394c0303dbf0534db0928e87967 Author: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Date: Fri Dec 11 11:20:28 2015 +0100 drm: use dev_name as default unique name in drm_dev_alloc() we're using a reasonable default which should work for everyone. Only mtk, rcar-du and sun4i are affected, and as kms-only drivers without any rendering support no one should ever care about the unique name v2: Rebase on top of mediatek. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466499262-18717-5-git-send-email-daniel.vetter@ffwll.ch
2016-06-21drm/rcar-du: Remove redundant calls to drm_connector_register_all()Chris Wilson1-5/+0
Up to now, the recommendation was for drivers to call drm_dev_register() followed by drm_connector_register_all(). Now that drm_connector_register() is safe against multiple invocations, we can move drm_connector_register_all() to drm_dev_register() and not suffer from any backwards compatibility issues with drivers not following the more rigorous init ordering. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Tested-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1466151923-1572-8-git-send-email-chris@chris-wilson.co.uk
2016-06-20drm: rcar-du: error message is not needed for EPROBE_DEFERKuninori Morimoto1-1/+3
EPROBE_DEFER is not error, thus, error message on kernel log on this case is confusable. Print it only error cases Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-06-20drm: rcar-du: error message is not needed for drm_vblank_init()Kuninori Morimoto1-3/+1
The only reason drm_vblank_init() could return an error at the moment is a kcalloc() failure. So we can remove current error message completely. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-06-20rcar-du: add/rename DEFR6 TCON bitsSergei Shtylyov1-2/+3
The TCNE2 bit of the DEFR6 register was renamed to TCNE1 in the R-Car gen2 manuals -- which makes more sense as that bit controls whether DU1, not DU2 is connected to TCON. While at it, add the TCNE0 bit which controls whether DU0 is connected to TCON. Based on the large patch by Andrey Gusakov <andrey.gusakov@cogentembedded.com>. Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-06-17[media] drm: rcar-du: Add Z-order support for VSP planesLaurent Pinchart2-3/+10
Make the Z-order of VSP planes configurable through the zpos property, exactly as for the native DU planes. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-17[media] drm: rcar-du: Add alpha support for VSP planesLaurent Pinchart1-19/+19
Make the global alpha multiplier of VSP planes configurable through the alpha property, exactly as for the native DU planes. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-10drm: rcar-du: Rely on the default ->best_encoder() behaviorBoris Brezillon5-20/+0
All outputs have a 1:1 relationship between connectors and encoders, and the driver is relying on the atomic helpers: we can drop the custom ->best_encoder() implementations and let the core call drm_atomic_helper_best_encoder() for us. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-10-git-send-email-boris.brezillon@free-electrons.com
2016-06-10drm/atomic-helper: Massage swap_state signature somewhatDaniel Vetter1-1/+1
- dev is redundant, we have state->atomic - add stall parameter, which must be set when swapping needs to stall for preceeding commits to stop looking at ->state pointers. Currently all drivers need this to be, just prep work for a glorious future. v2: Rebased on top of commit e7cf0963f816fa44190caaf51aeffaa614c340c6 Author: Gerd Hoffmann <kraxel@redhat.com> Date: Tue May 31 08:50:47 2016 +0200 virtio-gpu: add atomic_commit function Cc: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465509992-19284-1-git-send-email-daniel.vetter@ffwll.ch Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-2-git-send-email-daniel.vetter@ffwll.ch
2016-06-09Merge tag 'topic/drm-misc-2016-06-07' of ↵Dave Airlie2-16/+12
git://anongit.freedesktop.org/drm-intel into drm-next As promised, piles of prep work all around: - drm_atomic_state rework, prep for nonblocking commit helpers - fence patches from Gustavo and Christian to prep for atomic fences and some cool work in ttm/amdgpu from Christian - drm event prep for both nonblocking commit and atomic fences - Gustavo seems on a crusade against the non-kms-native version of the vblank functions. - prep work from Boris to nuke all the silly ->best_encoder implementations we have (we really only need that for truly dynamic cases like dvi-i vs dvi-d or dp mst selecting the right transcoder on intel) - prep work from Laurent to rework the format handling functions - and few small things all over * tag 'topic/drm-misc-2016-06-07' of git://anongit.freedesktop.org/drm-intel: (47 commits) drm/dsi: Implement set tear scanline drm/fb_cma_helper: Implement fb_mmap callback drm/qxl: Remove useless drm_fb_get_bpp_depth() call drm/ast: Remove useless drm_fb_get_bpp_depth() call drm/atomic: Fix remaining places where !funcs->best_encoder is valid drm/core: Change declaration for gamma_set. Documentation: add fence-array to kernel DocBook drm/shmobile: use drm_crtc_vblank_{get,put}() drm/radeon: use drm_crtc_vblank_{get,put}() drm/qxl: use drm_crtc_vblank_{get,put}() drm/atmel: use drm_crtc_vblank_{get,put}() drm/armada: use drm_crtc_vblank_{get,put}() drm/amdgpu: use drm_crtc_vblank_{get,put}() drm/virtio: use drm_crtc_send_vblank_event() drm/udl: use drm_crtc_send_vblank_event() drm/qxl: use drm_crtc_send_vblank_event() drm/atmel: use drm_crtc_send_vblank_event() drm/armada: use drm_crtc_send_vblank_event() drm/doc: Switch to sphinx/rst fixed-width quoting drm/doc: Drop kerneldoc for static functions in drm_irq.c ...
2016-06-02drm/rcar-du: Use for_each_*_in_stateDaniel Vetter2-16/+12
We want to hide drm_atomic_state internals better. v2: Use drm_crtc_mask (Maarten). Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-5-git-send-email-daniel.vetter@ffwll.ch
2016-06-01drm/rcar-du: Use lockless gem BO free callbackDaniel Vetter1-1/+1
No dev->struct_mutex anywhere to be seen. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-11-git-send-email-daniel.vetter@ffwll.ch
2016-05-17drm: Drop plane argument from __drm_atomic_helper_plane_destroy_stateDaniel Vetter2-2/+2
It's unused, and really this helper should only look at the state structure and nothing else. v2: Fix commit message (Laurent). v3: Rebase onto mtk driver merge. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Mark Yao <mark.yao@rock-chips.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462804451-15318-2-git-send-email-daniel.vetter@ffwll.ch
2016-05-05Merge tag 'topic/drm-misc-2016-05-04' of ↵Dave Airlie2-3/+4
git://anongit.freedesktop.org/drm-intel into drm-next Ofc I promise just a few leftovers for drm-misc and somehow it's the biggest pull. But really mostly trivial stuff: - MAINTAINERS updates from Emil - rename async to nonblock in atomic_commit to avoid the confusion between nonblocking ioctl and async flip (= not vblank synced), from Maarten. Needs to be regened with newer drivers, but probably only after -rc1 to catch them all. - actually lockless gem_object_free, plus acked driver conversion patches. All the trickier prep stuff already is in drm-next. - Noralf's nice work for generic defio support in our fbdev emulation. Keeps the udl hack, and qxl is tested by Gerd. * tag 'topic/drm-misc-2016-05-04' of git://anongit.freedesktop.org/drm-intel: (47 commits) drm: Fixup locking WARN_ON mistake around gem_object_free_unlocked drm/etnaviv: Use lockless gem BO free callback drm/imx: Use lockless gem BO free callback drm/radeon: Use lockless gem BO free callback drm/amdgpu: Use lockless gem BO free callback drm/gem: support BO freeing without dev->struct_mutex MAINTAINERS: Add myself for the new VC4 (RPi GPU) graphics driver. MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers MAINTAINERS: Add a few DRM drivers by Dave Airlie MAINTAINERS: List the correct git repo for the Renesas DRM drivers MAINTAINERS: Update the files list for the Renesas DRM drivers MAINTAINERS: Update the files list for the Armada DRM driver MAINTAINERS: Update the files list for the Rockchip DRM driver MAINTAINERS: Update the files list for the Exynos DRM driver MAINTAINERS: Add maintainer entry for the VMWGFX DRM driver MAINTAINERS: Add maintainer entry for the MSM DRM driver MAINTAINERS: Add maintainer entry for the Nouveau DRM driver MAINTAINERS: Update the files list for the Etnaviv DRM driver MAINTAINERS: Remove unneded wildcard for the i915 DRM driver drm/atomic: Add WARN_ON when state->acquire_ctx is not set. ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-06 22:26:05 +0300