summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/panel
AgeCommit message (Collapse)AuthorFilesLines
2020-12-08drm/panel: mantix: Allow to specify default mode for different panelsGuido Günther1-7/+11
This can be used to use different modes for differnt panels via OF device match. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/2580dba34c95a8159c1bdfd07604fbb8dbd0ad8c.1605688147.git.agx@sigxcpu.org
2020-12-08drm/panel: mantix: Tweak init sequenceGuido Günther1-0/+5
We've seen some (non permanent) burn in and bad white balance on some of the panels. Adding this bit from a vendor supplied sequence fixes it. Fixes: 72967d5616d3 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel") Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/8451831b60d5ecb73a156613d98218a31bd55680.1605688147.git.agx@sigxcpu.org
2020-12-08drm/panel: st7703: Use dev_err_probeGuido Günther1-16/+8
Less code and easier probe deferral debugging. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/36405038d93eb148f3e8ed8e5ea70de8e87afd78.1605688147.git.agx@sigxcpu.org
2020-12-07drm: panel: add Khadas TS050 panel driverNeil Armstrong3-0/+882
This add support for the Khadas TS050 1080x1920 5" LCD DSI panel designed to work with the Khadas Edge-V, Captain, VIM3 and VIM3L Single Board Computers. It provides a MIPI DSI interface to the host, a built-in LED backlight and touch controller. The init values was taken from the vendor source tree, comments were added to the know values but most of the init table is undocumented. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> [narmstrong: call drm_panel_remove if mipi_dsi_attach fails] Link: https://patchwork.freedesktop.org/patch/msgid/20201204081949.38418-3-narmstrong@baylibre.com
2020-12-06drm/panel: s6e63m0: Fix init sequence againLinus Walleij1-10/+32
The DSI version of the panel behaved instable and close scrutiny of the vendor driver from the Samsung GT-S8190 shows a different initialization sequence for the DSI mode panel than the DPI mode panel. Make the initialization depend on whether we are in DSI or DPI mode and handle the differences. After this the panel on the GT-I8190 becomes much more stable. Also spell out some more custom DCS commands found in the vendor source code to cut down a bit on magic where we can. Fixes: f0aee45ffc8b ("drm/panel: s6e63m0: Fix init sequence") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20201205122229.1952980-1-linus.walleij@linaro.org
2020-12-05drm: panel: add flags to BOE NV110WTM-N61Douglas Anderson1-0/+2
I forgot to add these when posting up the support for BOE NV110WTM-N61. Add them now. Fixes: a96ee0f6b58d ("drm: panel: simple: Add BOE NV110WTM-N61") Signed-off-by: Douglas Anderson <dianders@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201201125554.v2.1.I8a7bfc0966e803ab91001c9e6d01a736950c4981@changeid
2020-12-05drm: panel: Fully transition panel_desc kerneldoc to inline styleDouglas Anderson1-16/+27
In commit 131f909ad55f ("drm: panel: simple: Fixup the struct panel_desc kernel doc") I transitioned the more deeply nested kerneldoc comments into the inline style. Apparently it is desirable to continue the job and move _everything_ in this struct to inline. Let's do it. While doing this, we also add a short summary for the whole struct to fix a warning when we run with extra warnings, AKA: scripts/kernel-doc -v -rst drivers/gpu/drm/panel/panel-simple.c The warning was: drivers/gpu/drm/panel/panel-simple.c:42: warning: missing initial short description on line: * struct panel_desc Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201201125822.1.I3c4191336014bd57364309439e56f600c94bb12b@changeid
2020-11-30drm: panel: simple: Add BOE NV110WTM-N61Douglas Anderson1-0/+46
Add support for the BOE NV110WTM-N61 panel. The EDID lists two modes (one for 60 Hz refresh rate and one for 40 Hz), so we'll list both of them here. Note that the panel datasheet requires 80 ms between HPD asserting and the backlight power being turned on. We'll use the new timing constraints structure to do this cleanly. This assumes that the backlight will be enabled _after_ the panel enable finishes. This is how it works today and seems a sane assumption. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201109170018.v4.4.I71b2118dfc00fd7b43b02d28e7b890081c2acfa2@changeid
2020-11-30drm: panel: simple: Allow specifying the delay from prepare to enableDouglas Anderson1-6/+38
On the panel I'm looking at, there's an 80 ms minimum time between HPD being asserted by the panel and setting the backlight enable GPIO. While we could just add an 80 ms "enable" delay, this is not ideal. Link training is allowed to happen in parallel with this delay so the fixed 80 ms delay over-delays. We'll support this by logging the time at the end of prepare and then delaying in enable if enough time hasn't passed. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201109170018.v4.3.Ib9ce3c6482f464bf594161581521ced46bbd54ed@changeid
2020-11-30drm: panel: simple: Defer unprepare delay till next prepare to shorten itDouglas Anderson1-3/+24
It is believed that all of the current users of the "unprepare" delay don't actually need to wait the amount of time specified directly in the unprepare phase. The purpose of the delay that's specified is to allow the panel to fully power off so that we don't try to power it back on before it's managed to full power down. Let's use this observation to avoid the fixed delay that we currently have. Instead of delaying, we'll note the current time when the unprepare happens. If someone then tries to prepare the panel later and not enough time has passed, we'll do the delay before starting the prepare phase. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201109170018.v4.2.I06a95d83e7fa1bd919c8edd63dacacb5436e495a@changeid
2020-11-30drm: panel: simple: Fixup the struct panel_desc kernel docDouglas Anderson1-17/+42
When I run: scripts/kernel-doc -rst drivers/gpu/drm/panel/panel-simple.c I see that several of the kernel-doc entries aren't showing up because they don't specify the full path down the hierarchy. Let's fix that and also move to inline kernel docs. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201109170018.v4.1.Icaa86f0a4ca45a9a7184da4bc63386b29792d613@changeid
2020-11-30drm/panel: sony-acx565akm: Fix race condition in probeSebastian Reichel1-1/+1
The probe routine acquires the reset GPIO using GPIOD_OUT_LOW. Directly afterwards it calls acx565akm_detect(), which sets the GPIO value to HIGH. If the bootloader initialized the GPIO to HIGH before the probe routine was called, there is only a very short time period of a few instructions where the reset signal is LOW. Exact time depends on compiler optimizations, kernel configuration and alignment of the stars, but I expect it to be always way less than 10us. There are no public datasheets for the panel, but acx565akm_power_on() has a comment with timings and reset period should be at least 10us. So this potentially brings the panel into a half-reset state. The result is, that panel may not work after boot and can get into a working state by re-enabling it (e.g. by blanking + unblanking), since that does a clean reset cycle. This bug has recently been hit by Ivaylo Dimitrov, but there are some older reports which are probably the same bug. At least Tony Lindgren, Peter Ujfalusi and Jarkko Nikula have experienced it in 2017 describing the blank/unblank procedure as possible workaround. Note, that the bug really goes back in time. It has originally been introduced in the predecessor of the omapfb driver in commit 3c45d05be382 ("OMAPDSS: acx565akm panel: handle gpios in panel driver") in 2012. That driver eventually got replaced by a newer one, which had the bug from the beginning in commit 84192742d9c2 ("OMAPDSS: Add Sony ACX565AKM panel driver") and still exists in fbdev world. That driver has later been copied to omapdrm and then was used as a basis for this driver. Last but not least the omapdrm specific driver has been removed in commit 45f16c82db7e ("drm/omap: displays: Remove unused panel drivers"). Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reported-by: Tony Lindgren <tony@atomide.com> Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reported-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Fixes: 1c8fc3f0c5d2 ("drm/panel: Add driver for the Sony ACX565AKM panel") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201127200429.129868-1-sebastian.reichel@collabora.com
2020-11-24panel-simple: add Innolux N125HCE-GN1Lukas F. Hartmann1-0/+28
The Innolux N125HCE-GN1 display is used in the MNT Reform 2.0 laptop, attached via eDP to a SN65DSI86 MIPI-DSI to eDP bridge. Signed-off-by: Lukas F. Hartmann <lukas@mntre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201124172604.981746-1-lukas@mntre.com
2020-11-20drm/panel: s6e63m0: Fix init sequenceLinus Walleij1-8/+10
The init sequence consist of a number of unknown settings for the display controller. This patch achieves two things: - Fix an error that must have happened when the driver was converted from the backlight subsystem: the 0xb8 configuration command was lost and added as a tail to the previous command. - Update some minor settings in some bytes here and there according to changes in the Samsung GT-I9070 and Samsung GT-S7710 code dumps. Since two other devices use these settings they probably reflect trimmings later found to be better for the display rather than customizations for these devices. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201117175621.870085-3-linus.walleij@linaro.org
2020-11-20drm/panel: s6e63m0: Implement 28 backlight levelsLinus Walleij1-53/+257
A later version of the s6e63m0 driver in the Samsung GT-I9070 vendor tree provides 28 different backlight levels making use of elaborate control of the ACL and ELVSS regulator. Implement this more fine-grained backlight control. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201117175621.870085-2-linus.walleij@linaro.org
2020-11-20drm/panel: s6e63m0: Fix and extend MCS tableLinus Walleij1-8/+9
Fix up the format of the manufacturer command set table to be TAB-indented and lowercase. Add the MCS_TEMP_SWIRE command that we will make use of. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201117175621.870085-1-linus.walleij@linaro.org
2020-11-17drm/panel: Add ABT Y030XX067A 3.0" 320x480 panelPaul Cercueil3-0/+373
Add support for the ShenZhen Asia Better Technology Ltd. Y030XX067A 3.0" 320x480 IPS panel. This panel can be found in the YLM RG-280M, RG-300 and RG-99 handheld gaming consoles. While being 320x480, it is actually a horizontal 4:3 panel with non-square pixels. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201101093150.8071-5-paul@crapouillou.net
2020-11-16drm/panel: s6e63m0: Set up some display infoLinus Walleij1-0/+9
Copy over the width/height in millimeters to the (somewhat redundant) display info, and set up the bus format and bus flags for the display. When used as DPI this display requires DE to be active low and pixel data to be output on the negative edge. It might be that it was previously used with a display controller that either does not support these settings or was hardcoded to use these as default. This information comes from the source code of the Samsung GT-I9070 mobile phone. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201110234653.2248594-6-linus.walleij@linaro.org
2020-11-16drm/panel: s6e63m0: Support 3WIRE protocolLinus Walleij1-1/+2
The panel can be connected using 3WIRE, then it is however necessary that the flag SPI_3WIRE is preserved on the device, as we set this from generic device tree parsing code (or similar). Just |= the SPI mode. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201110234653.2248594-5-linus.walleij@linaro.org
2020-11-16drm/panel: s6e63m0: Add some explanationsLinus Walleij1-0/+7
The SPI DCS code was a bit hard to understand as the device accepts 9-bit transfers packed into 16-bit words with the most significant bit in bit 9 of the 16-bit word. Add some clarifying comments. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201110234653.2248594-4-linus.walleij@linaro.org
2020-11-16drm/panel: s6e63m0: Implement reading from panelLinus Walleij1-6/+13
This code was found in the Samsung vendor tree for the Samsung GT-I9070 mobile phone. Let's support reading before we implement the 3WIRE protocol for both reading and writing. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201110234653.2248594-3-linus.walleij@linaro.org
2020-11-16drm/panel: s6e63m0: Simplify SPI writingLinus Walleij1-9/+2
This writing code is equivalent to the spi_write() helper in the SPI framework. Insert a comment that this will always work fine since SPI buffers are in native endianness. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201110234653.2248594-2-linus.walleij@linaro.org
2020-11-14drm/panel/samsung-sofef00: Add panel for OnePlus 6/T devicesCaleb Connolly3-0/+364
The OnePlus 6/T devices use different panels however they are functionally identical with the only differences being the resolution. The panels also don't seem to be used by any other devices, just combine them into one driver. The panels are: samsung,sofef00 and samsung,s6e3fc2x01 Signed-off-by: Caleb Connolly <caleb@connolly.tech> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [fixed checkpatch warnings] Link: https://patchwork.freedesktop.org/patch/msgid/20201112161920.2671430-2-caleb@connolly.tech
2020-11-14drm/panel/panel-tpo-tpg110: Correct misnaming and supply missing param ↵Lee Jones1-1/+2
description Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/panel/panel-tpo-tpg110.c:94: warning: Function parameter or member 'panel_mode' not described in 'tpg110' drivers/gpu/drm/panel/panel-tpo-tpg110.c:372: warning: Function parameter or member 'connector' not described in 'tpg110_get_modes' Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201113134938.4004947-14-lee.jones@linaro.org
2020-11-09drm/panel: simple: Add flags to boe_nv133fhm_n61Stephen Boyd1-0/+1
Reading the EDID of this panel shows that these flags should be set. Set them so that we match what is in the EDID. Cc: Douglas Anderson <dianders@chromium.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: b0c664cc80e8 ("panel: simple: Add BOE NV133FHM-N61") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201106182333.3080124-1-swboyd@chromium.org
2020-11-08drm/panel: panel-simple: Add connector_type for EDT ETM0700G0DH6 panelBiju Das1-0/+1
Fix the warning message "missing connector type" by adding connector_type for EDT ETM0700G0DH6 panel. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201020094910.4756-1-biju.das.jz@bp.renesas.com
2020-11-08drm: panel: simple: add missing platform_driver_unregister() in ↵Qinglang Miao1-1/+3
panel_simple_init Add the missing platform_driver_unregister() before return from panel_simple_init in the error handling case when failed to register panel_simple_dsi_driver with CONFIG_DRM_MIPI_DSI enabled. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201031011856.137307-1-miaoqinglang@huawei.com
2020-11-06drm/panel: panel-ilitek-ili9322: Demote non-conformant kernel-doc headerLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_THROUGH' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_ALIGNED' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_DUMMY_320X240' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_DUMMY_360X240' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_DISABLED_1' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_PRGB_THROUGH' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_PRGB_ALIGNED' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_YUV_640X320_YCBCR' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_YUV_720X360_YCBCR' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_DISABLED_2' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_ITU_R_BT656_720X360_YCBCR' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_ITU_R_BT656_640X320_YCBCR' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_UNKNOWN' not described in enum 'ili9322_input' Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201105144517.1826692-17-lee.jones@linaro.org
2020-11-06drm/panel: panel-simple: Fix 'struct panel_desc's headerLee Jones1-0/+2
Struct headers should start with 'struct <name>' Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/panel/panel-simple.c:42: warning: Cannot understand * @modes: Pointer to array of fixed modes appropriate for this panel. If Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201105144517.1826692-12-lee.jones@linaro.org
2020-10-23drm/panel: mantix: Fix panel resetGuido Günther1-7/+16
The mantix panel needs two reset lines (RESX and TP_RSTN) deasserted to output an image. Only deasserting RESX is not enough and the display will stay blank. Deassert in prepare() and assert in unprepare() to keep device held in reset when off. Fixes: 72967d5616d3 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel") Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/ba71a8ab010d263a8058dd4f711e3bcd95877bf2.1602584953.git.agx@sigxcpu.org
2020-10-23drm/panel: mantix: Don't dereference NULL modeGuido Günther1-1/+1
Don't dereference mode which was just NULL checked. Fixes: 72967d5616d3 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel") Signed-off-by: Guido Günther <agx@sigxcpu.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/659158549f3c6cc1c71ceed0943e760e861c1206.1602584953.git.agx@sigxcpu.org
2020-10-19drm: panel: add TDO tl070wsh30 panel driverNeil Armstrong3-0/+262
This adds support for the TDO TL070WSH30 TFT-LCD panel module. The panel has a 1024×600 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI interface to the host, a built-in LED backlight and touch controller. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200915121912.4347-5-narmstrong@baylibre.com
2020-10-17drm/panel: simple: Add YTC700TLAG-05-201CJagan Teki1-0/+29
Add panel timings for YTC700TLAG-05-201C 7" TFT LCD panel from Yes Optoelectronics Co.,Ltd. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200904180821.302194-3-jagan@amarulasolutions.com
2020-10-17drm/panel: st7703: Make jh057n00900_panel_desc staticJason Yan1-1/+1
This eliminates the following sparse warning: drivers/gpu/drm/panel/panel-sitronix-st7703.c:156:26: warning: symbol 'jh057n00900_panel_desc' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> [Use static const] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200912033809.142773-1-yanaijie@huawei.com
2020-10-17drm/panel: simplify the return expression of rb070d30_panel_enable()Liu Shixin1-6/+1
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200915032623.1772361-1-liushixin2@huawei.com
2020-10-16drm/panel: rm68200: fix mode to 50fpsYannick Fertre1-6/+6
Compute new timings to get a framerate of 50fps with a pixel clock @54Mhz. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200925141618.12097-1-yannick.fertre@st.com
2020-10-16drm/panel: mantix: Fix panel resetGuido Günther1-7/+16
The mantix panel needs two reset lines (RESX and TP_RSTN) deasserted to output an image. Only deasserting RESX is not enough and the display will stay blank. Deassert in prepare() and assert in unprepare() to keep device held in reset when off. Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/ba71a8ab010d263a8058dd4f711e3bcd95877bf2.1602584953.git.agx@sigxcpu.org
2020-10-16drm/panel: mantix: Don't dereference NULL modeGuido Günther1-1/+1
Don't dereference mode which was just NULL checked. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/659158549f3c6cc1c71ceed0943e760e861c1206.1602584953.git.agx@sigxcpu.org
2020-10-15drm: panel: Add novatek nt36672a panel driverSumit Semwal3-0/+722
Novatek NT36672a is a generic DSI IC that drives command and video mode panels. Add the driver for it. Right now adding support for some Poco F1 phones that have an LCD panel from Tianma connected with this IC, with a resolution of 1080x2246 that operates in DSI video mode. During testing, Benni Steini <bennisteinir@gmail.com> helped us fix the reset sequence timing (from 10ms to 20ms), to get the bootanimation to work on Android. With current AOSP, we need to increase it to 200ms - this seems to be a safe high value to avoid a white screen occasionally. Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Cc: Benni Steini <bennisteinir@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200902064407.30712-3-sumit.semwal@linaro.org
2020-09-24drm/panel: otm8009a: allow using non-continuous dsi clockAntonio Borneo1-1/+1
The panel is able to work when dsi clock is non-continuous, thus the system power consumption can be reduced using such feature. Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags. Changes in v2: - Added my signed-off Signed-off-by: Antonio Borneo <antonio.borneo@st.com> Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200922074253.28810-1-yannick.fertre@st.com
2020-09-24drm/panel: otm8009a: remove hack to force commands in HSAntonio Borneo1-16/+2
The panel is able to receive commands in LP. The current hack to force backlight commands in HS was due to workaround an incorrect settings on DSI controller that prevents sending LP commands while video out was active. Remove the hack that forces HS commands. Changes in v2: - Added my signed-off Signed-off-by: Antonio Borneo <antonio.borneo@st.com> Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200922074242.28719-1-yannick.fertre@st.com
2020-09-24drm/panel: rm68200: allow using non-continuous dsi clockYannick Fertre1-1/+1
The panel is able to work when dsi clock is non-continuous, thus the system power consumption can be reduced using such feature. Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags. Signed-off-by: Antonio Borneo <antonio.borneo@st.com> Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200918114736.11322-1-yannick.fertre@st.com
2020-09-24drm/panel: simplify the return expression of td028ttec1_prepareQinglang Miao1-6/+1
Simplify the return expression. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200921131018.91513-1-miaoqinglang@huawei.com
2020-09-21drm/panel: samsung: make vint_table static constJason Yan1-1/+1
This eliminates the following sparse warning: drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c:217:15: warning: symbol 'vint_table' was not declared. Should it be static? While at it, make the table const as it is never modified. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200916132301.2914017-1-yanaijie@huawei.com
2020-09-10drm/panel: s6e63m0: Add missing MODULE_LICENSEYueHaibing1-0/+4
Kbuild warns when this file is built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpu/drm/panel/panel-samsung-s6e63m0.o Add the missing license/author/description tags. Fixes: b7b23e447687 ("drm/panel: s6e63m0: Break out SPI transport") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200909134137.32284-1-yuehaibing@huawei.com
2020-09-06drm/panel: s6e63m0: Fix up DRM_DEV* regressionLinus Walleij3-27/+17
Ooops the panel drivers stopped to use DRM_DEV* messages and we predictably create errors by merging code that still use it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20200906132903.5739-1-linus.walleij@linaro.org
2020-09-05drm/panel: s6e63m0: Order enable/disable sequenceLinus Walleij1-3/+15
The upstream S6E63M0 driver has some peculiarities around the prepare/enable disable/unprepare sequence: the screen is taken out of sleep in prepare() as part of s6e63m0_init() the put to on with MIPI_DCS_SET_DISPLAY_ON in enable(). However it is just put into sleep mode directly in disable(). As disable()/enable() can be called without unprepare()/prepare() being called, this is unbalanced, we should take the display out of sleep in enable() then turn it off(). Further MIPI_DCS_SET_DISPLAY_OFF is never called balanced with MIPI_DCS_SET_DISPLAY_ON. The vendor driver for Samsung GT-I8190 (Golden) does all of these things in strict order. Augment the driver to do exit sleep/set display on in enable() and set display off/enter sleep in disable(). Further send an explicit reset pulse in power_on() so we come up in a known state, and issue the MCS_ERROR_CHECK command after setting display on like the vendor driver does. Also use the timings from the vendor driver in the sequence. Doing all of these things makes the display much more stable on the Samsung GT-I8190 when enabling/disabling the display pipeline. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200817213906.88207-1-linus.walleij@linaro.org
2020-09-05drm/panel: s6e63m0: Add code to identify panelLinus Walleij1-0/+60
We add code to identify a few different panels mounted on the s6e63m0 controller. This is necessary to achieve the proper biasing with DSI versions of the panel. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-5-linus.walleij@linaro.org
2020-09-05drm/panel: s6e63m0: Add reading functionalityLinus Walleij4-2/+43
This adds code to send read commands to read a single byte from the display, in order to perform MTP ID look-up of the mounted panel on the s6e63m0 controller. This is needed for proper biasing on the DSI variants. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-4-linus.walleij@linaro.org
2020-09-05drm/panel: s6e63m0: Add DSI transportLinus Walleij6-3/+144
This makes it possible to use the s6e63m0 panel with a DSI host, such as in the Samsung GT-I8190 (Golden) mobile phone. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-3-linus.walleij@linaro.org
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-04 01:26:05 +0300