Age | Commit message (Collapse) | Author | Files | Lines |
|
So that we can start using drm_dbg_*() throughout the DRM DP helpers.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-13-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
|
|
Another function we need to pass drm_device down to in order to start using
drm_dbg_*().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-11-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
|
|
Another function that we'll need to pass a drm_device (and not drm_dp_aux)
down to so that we can move over to using drm_dbg_*().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-10-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
|
|
Since we're about to be using drm_dbg_*() throughout the DP helpers, we'll
need to be able to access the DRM device in the dual mode DP helpers as
well. Note however that since drm_dp_dual_mode_detect() can be called with
DDC adapters that aren't part of a drm_dp_aux struct, we need to pass down
the drm_device to these functions instead of using drm_dp_aux.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-9-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
|
|
So that we can start using drm_dbg_*() for
drm_dp_link_train_channel_eq_delay() and
drm_dp_lttpr_link_train_channel_eq_delay().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-7-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
|
|
So that we can start using drm_dbg_*() in
drm_dp_link_train_clock_recovery_delay().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-6-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
|
|
This is something that we've wanted for a while now: the ability to
actually look up the respective drm_device for a given drm_dp_aux struct.
This will also allow us to transition over to using the drm_dbg_*() helpers
for debug message printing, as we'll finally have a drm_device to reference
for doing so.
Note that there is one limitation with this - because some DP AUX adapters
exist as platform devices which are initialized independently of their
respective DRM devices, one cannot rely on drm_dp_aux->drm_dev to always be
non-NULL until drm_dp_aux_register() has been called. We make sure to point
this out in the documentation for struct drm_dp_aux.
v3:
* Add WARN_ON_ONCE() to drm_dp_aux_register() if drm_dev isn't filled out
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-4-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
|
|
The Kconfig dependency is incomplete since DRM_I915_GVT is a 'bool'
symbol that depends on the 'tristate' VFIO_MDEV. This allows a
configuration with VFIO_MDEV=m, DRM_I915_GVT=y and DRM_I915=y that
causes a link failure:
x86_64-linux-ld: drivers/gpu/drm/i915/gvt/gvt.o: in function `available_instances_show':
gvt.c:(.text+0x67a): undefined reference to `mtype_get_parent_dev'
x86_64-linux-ld: gvt.c:(.text+0x6a5): undefined reference to `mtype_get_type_group_id'
x86_64-linux-ld: drivers/gpu/drm/i915/gvt/gvt.o: in function `description_show':
gvt.c:(.text+0x76e): undefined reference to `mtype_get_parent_dev'
x86_64-linux-ld: gvt.c:(.text+0x799): undefined reference to `mtype_get_type_group_id'
Clarify the dependency by specifically disallowing the broken
configuration. If VFIO_MDEV is built-in, it will work, but if
VFIO_MDEV=m, the i915 driver cannot be built-in here.
Fixes: 07e543f4f9d1 ("vfio/gvt: Make DRM_I915_GVT depend on VFIO_MDEV")
Fixes: 9169cff168ff ("vfio/mdev: Correct the function signatures for the mdev_type_attributes")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Message-Id: <20210422133547.1861063-1-arnd@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull CFI on arm64 support from Kees Cook:
"This builds on last cycle's LTO work, and allows the arm64 kernels to
be built with Clang's Control Flow Integrity feature. This feature has
happily lived in Android kernels for almost 3 years[1], so I'm excited
to have it ready for upstream.
The wide diffstat is mainly due to the treewide fixing of mismatched
list_sort prototypes. Other things in core kernel are to address
various CFI corner cases. The largest code portion is the CFI runtime
implementation itself (which will be shared by all architectures
implementing support for CFI). The arm64 pieces are Acked by arm64
maintainers rather than coming through the arm64 tree since carrying
this tree over there was going to be awkward.
CFI support for x86 is still under development, but is pretty close.
There are a handful of corner cases on x86 that need some improvements
to Clang and objtool, but otherwise works well.
Summary:
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)"
* tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: allow CONFIG_CFI_CLANG to be selected
KVM: arm64: Disable CFI for nVHE
arm64: ftrace: use function_nocfi for ftrace_call
arm64: add __nocfi to __apply_alternatives
arm64: add __nocfi to functions that jump to a physical address
arm64: use function_nocfi with __pa_symbol
arm64: implement function_nocfi
psci: use function_nocfi for cpu_resume
lkdtm: use function_nocfi
treewide: Change list_sort to use const pointers
bpf: disable CFI in dispatcher functions
kallsyms: strip ThinLTO hashes from static functions
kthread: use WARN_ON_FUNCTION_MISMATCH
workqueue: use WARN_ON_FUNCTION_MISMATCH
module: ensure __cfi_check alignment
mm: add generic function_nocfi macro
cfi: add __cficanonical
add support for Clang CFI
|
|
Return EREMOTE value when frame buffer object is not backed by LMEM
for discrete. If Local memory is supported by hardware the framebuffer
backing gem objects should be from local memory.
Signed-off-by: Mohammed Khajapasha <mohammed.khajapasha@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-7-matthew.auld@intel.com
|
|
In the scenario where local memory is available, we have
rely on CPU access via lmem directly instead of aperture.
v2:
gmch is only relevant for much older hw, therefore we can drop the
has_aperture check since it should always be present on such platforms.
(Chris)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Chris P Wilson <chris.p.wilson@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-6-matthew.auld@intel.com
|
|
Use local memory io BAR address for fbdev's fb_mmap() operation on
discrete, fbdev uses the physical address of our framebuffer for its
fb_mmap() fn.
Signed-off-by: Mohammed Khajapasha <mohammed.khajapasha@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-5-matthew.auld@intel.com
|
|
It's a requirement that for dgfx we place all the paging structures in
device local-memory.
v2: use i915_coherent_map_type()
v3: improve the shared dma-resv object comment
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-4-matthew.auld@intel.com
|
|
We need to generalise our accessor for the page directories and tables from
using the simple kmap_atomic to support local memory, and this setup
must be done on acquisition of the backing storage prior to entering
fence execution contexts. Here we replace the kmap with the object
mapping code that for simple single page shmemfs object will return a
plain kmap, that is then kept for the lifetime of the page directory.
Note that keeping the mapping around is a potential concern here, since
while the vma is pinned the mapping remains there for the PDs
underneath, or at least until the used_count reaches zero, at which
point we can safely destroy the mapping. For 32b this will be even worse
since the address space is more limited, but since this change mostly
impacts full ppGTT platforms, the justification is that for modern
platforms we shouldn't care too much about 32b.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-3-matthew.auld@intel.com
|
|
Determine the possible coherent map type based on object location,
and if target has llc or if user requires an always coherent
mapping.
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-2-matthew.auld@intel.com
|
|
Use I915_MAP_WC when default state object is allocated in LMEM.
Signed-off-by: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-1-matthew.auld@intel.com
|
|
Our code analyzer reported a double free bug.
In gen8_preallocate_top_level_pdp, pde and pde->pt.base are allocated
via alloc_pd(vm) with one reference. If pin_pt_dma() failed, pde->pt.base
is freed by i915_gem_object_put() with a reference dropped. Then free_pd
calls free_px() defined in intel_ppgtt.c, which calls i915_gem_object_put()
to put pde->pt.base again.
As pde->pt.base is protected by refcount, so the second put will not free
pde->pt.base actually. But, maybe it is better to remove the first put?
Fixes: 82adf901138cc ("drm/i915/gt: Shrink i915_page_directory's slab bucket")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210426124340.4238-1-lyl2019@mail.ustc.edu.cn
|
|
TGL PSR2 hardware tracking shows momentary flicker and screen shift if
TGL Display stepping is B1 from A0.
It has been fixed from TGL Display stepping C0.
HSDES: 18015970021
HSDES: 2209313811
BSpec: 55378
v2: Add checking of PSR2 manual tracking (Jose)
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210422160544.2427123-1-gwan-gyeong.mun@intel.com
|
|
These are the 965g/g45/g33 specific DRB registers. Give them
a suitable suffix so we can add their counterparts for other
platforms.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421153401.13847-4-ville.syrjala@linux.intel.com
|
|
We've defined C0DRB3/C1DRB3 as 16 bit registers, so access them
as such.
Fixes: 1c8242c3a4b2 ("drm/i915: Use unchecked writes for setting up the fences")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421153401.13847-3-ville.syrjala@linux.intel.com
|
|
Gen2 tiles are 2KiB in size so i915_gem_object_get_tile_row_size()
can in fact return <4KiB, which leads to div-by-zero here.
Avoid that.
Not sure i915_gem_object_get_tile_row_size() is entirely
sane anyway since it doesn't account for the different tile
layouts on i8xx/i915...
I'm not able to hit this before commit 6846895fde05 ("drm/i915:
Replace PIN_NONFAULT with calls to PIN_NOEVICT") and it looks
like I also need to run recent version of Mesa. With those in
place xonotic trips on this quite easily on my 85x.
Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421153401.13847-2-ville.syrjala@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The usual updates from the irq departement:
Core changes:
- Provide IRQF_NO_AUTOEN as a flag for request*_irq() so drivers can
be cleaned up which either use a seperate mechanism to prevent
auto-enable at request time or have a racy mechanism which disables
the interrupt right after request.
- Get rid of the last usage of irq_create_identity_mapping() and
remove the interface.
- An overhaul of tasklet_disable().
Most usage sites of tasklet_disable() are in task context and
usually in cleanup, teardown code pathes. tasklet_disable()
spinwaits for a tasklet which is currently executed. That's not
only a problem for PREEMPT_RT where this can lead to a live lock
when the disabling task preempts the softirq thread. It's also
problematic in context of virtualization when the vCPU which runs
the tasklet is scheduled out and the disabling code has to spin
wait until it's scheduled back in.
There are a few code pathes which invoke tasklet_disable() from
non-sleepable context. For these a new disable variant which still
spinwaits is provided which allows to switch tasklet_disable() to a
sleep wait mechanism. For the atomic use cases this does not solve
the live lock issue on PREEMPT_RT. That is mitigated by blocking on
the RT specific softirq lock.
- The PREEMPT_RT specific implementation of softirq processing and
local_bh_disable/enable().
On RT enabled kernels soft interrupt processing happens always in
task context and all interrupt handlers, which are not explicitly
marked to be invoked in hard interrupt context are forced into task
context as well. This allows to protect against softirq processing
with a per CPU lock, which in turn allows to make BH disabled
regions preemptible.
Most of the softirq handling code is still shared. The RT/non-RT
specific differences are addressed with a set of inline functions
which provide the context specific functionality. The
local_bh_disable() / local_bh_enable() mechanism are obviously
seperate.
- The usual set of small improvements and cleanups
Driver changes:
- New drivers for Nuvoton WPCM450 and DT 79rc3243x interrupt
controllers
- Extended functionality for MStar, STM32 and SC7280 irq chips
- Enhanced robustness for ARM GICv3/4.1 drivers
- The usual set of cleanups and improvements all over the place"
* tag 'irq-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
irqchip/xilinx: Expose Kconfig option for Zynq/ZynqMP
irqchip/gic-v3: Do not enable irqs when handling spurious interrups
dt-bindings: interrupt-controller: Add IDT 79RC3243x Interrupt Controller
irqchip: Add support for IDT 79rc3243x interrupt controller
irqdomain: Drop references to recusive irqdomain setup
irqdomain: Get rid of irq_create_strict_mappings()
irqchip/jcore-aic: Kill use of irq_create_strict_mappings()
ARM: PXA: Kill use of irq_create_strict_mappings()
irqchip/gic-v4.1: Disable vSGI upon (GIC CPUIF < v4.1) detection
irqchip/tb10x: Use 'fallthrough' to eliminate a warning
genirq: Reduce irqdebug cacheline bouncing
kernel: Initialize cpumask before parsing
irqchip/wpcm450: Drop COMPILE_TEST
irqchip/irq-mst: Support polarity configuration
irqchip: Add driver for WPCM450 interrupt controller
dt-bindings: interrupt-controller: Add nuvoton, wpcm450-aic
dt-bindings: qcom,pdc: Add compatible for sc7280
irqchip/stm32: Add usart instances exti direct event support
irqchip/gic-v3: Fix OF_BAD_ADDR error handling
irqchip/sifive-plic: Mark two global variables __ro_after_init
...
|
|
We can handle the surface alignment of CCS and UV color planes for all
modifiers at one place, so do this. An AUX color plane can be a CCS or a
UV plane, use only the more specific query functions and remove
is_aux_plane() becoming redundant.
While at it add a TODO for linear UV color plane alignments. The spec
requires this to be stride-in-bytes * 64 on all platforms, whereas the
driver uses an alignment of 4k for gen<12 and 256k for gen>=12 for
linear UV planes.
v2:
- Restore previous alignment for linear UV surfaces.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421173220.3587009-1-imre.deak@intel.com
|
|
Change 'befor' to 'before'.
Signed-off-by: zuoqilin <zuoqilin@yulong.com>
[Jani: Fix comment marker placement while applying.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317074228.1147-1-zuoqilin1@163.com
|
|
Christian needs some patches from drm/next
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Fixes the following htmldocs warning:
drivers/gpu/drm/i915/gem/i915_gem_shrinker.c:102: warning: Function parameter or member 'ww' not described in 'i915_gem_shrink'
Fixes: cf41a8f1dc1e ("drm/i915: Finally remove obj->mm.lock.")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421120938.546076-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 772f7bb75dffd4ec90eaf411f9e09dc2429f5c81)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This code should propagate the error from intel_overlay_pin_fb()
but currently it returns success.
Fixes: 1b321026e213 ("drm/i915: Pass ww ctx to intel_pin_to_display_plane")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YHaFcEzcnh/hk1/Q@mwanda
(cherry picked from commit 103b8cbac28ea2965f24ca52e6a92d76d3851b3c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Fix redundant condition, caught in cppcheck by kernel test robot.
Reported-by: kernel test robot <lkp@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Fixes: b64d6c51380b ("drm/i915/display: Support PSR Multiple Instances")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210409231738.238682-1-jose.souza@intel.com
(cherry picked from commit 1884b579c0cfbb52a92462184406558ac633cafb)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The glk display version change is causing us to again attempt
LTTPR detection on glk. We must not do tha since glk doesn't
have a long enough AUX timeout. Restore the correct logic to
skip the detection.
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 2b5a4562edd0 ("drm/i915/display: Simplify GLK display version tests")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412054607.18133-4-ville.syrjala@linux.intel.com
(cherry picked from commit 543d592a73d3948737d0ae4880a407c6da28662f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We lost a CCS related w/a on glk when the display version
became 10 instead of 9. Restore the correct check.
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 2b5a4562edd0 ("drm/i915/display: Simplify GLK display version tests")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412054607.18133-3-ville.syrjala@linux.intel.com
(cherry picked from commit 0fe6637d9852a33c2873e59ae7e5225f92ac4cc2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We lost the FBC 16bpp 512byte stride requirement on glk when
we switched from display version 9 to 10. Restore the w/a to
avoid enabling FBC with a bad stride and thus display garbage.
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 2b5a4562edd0 ("drm/i915/display: Simplify GLK display version tests")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412054607.18133-2-ville.syrjala@linux.intel.com
(cherry picked from commit 87b8c3bc8d27270c9abd5e895ea9066e918ef89b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Reference needs to be taken before arming the timer. Luckily, given the
default timer period of 20s, the potential to hit the race is extremely
unlikely.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 9b4d0598ee94 ("drm/i915: Request watchdog infrastructure")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326105759.2387104-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit f7c379779161d364eb30338529490eac7dc377b7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
EDP_Y_COORDINATE_ENABLE became a reserved register in display 13.
EDP_Y_COORDINATE_VALID have the same fate as EDP_Y_COORDINATE_ENABLE
but as we don't need it, removing the macro definition of it.
BSpec: 50422
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421220224.200729-2-jose.souza@intel.com
|
|
Fixes the following htmldocs warnings:
drivers/gpu/drm/i915/i915_cmd_parser.c:1420: warning: Excess function parameter 'trampoline' description in 'intel_engine_cmd_parser'
drivers/gpu/drm/i915/i915_cmd_parser.c:1420: warning: Function parameter or member 'jump_whitelist' not described in 'intel_engine_cmd_parser'
drivers/gpu/drm/i915/i915_cmd_parser.c:1420: warning: Function parameter or member 'shadow_map' not described in 'intel_engine_cmd_parser'
drivers/gpu/drm/i915/i915_cmd_parser.c:1420: warning: Function parameter or member 'batch_map' not described in 'intel_engine_cmd_parser'
drivers/gpu/drm/i915/i915_cmd_parser.c:1420: warning: Excess function parameter 'trampoline' description in 'intel_engine_cmd_parser'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421120353.544518-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Fixes the following htmldocs warning:
drivers/gpu/drm/i915/gem/i915_gem_shrinker.c:102: warning: Function parameter or member 'ww' not described in 'i915_gem_shrink'
Fixes: cf41a8f1dc1e ("drm/i915: Finally remove obj->mm.lock.")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421120938.546076-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Stolen memory is always allocated as physically contiguous pages, so
mark the object flags as such. It looks like the flags were previously
just ignored so this had no effect. In the future we might to add the
proper plumbing for passing the flags all over the way down from the
caller, but for now we don't have a use for that.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421104658.304142-4-matthew.auld@intel.com
|
|
Since stolen can now be device local-memory underneath, we should try to
enforce any min_page_size restrictions when allocating pages.
Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421104658.304142-3-matthew.auld@intel.com
|
|
Underneath it's the same stuff, so things like the PTE_LM bits for the
GTT should just keep working as-is.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421104658.304142-2-matthew.auld@intel.com
|
|
Add "REGION_STOLEN" device info to dg1, create stolen memory
region from upper portion of local device memory, starting
from DSMBASE.
v2:
- s/drm_info/drm_dbg; userspace likely doesn't care about stolen.
- mem->type is only setup after the region probe, so setting the name
as stolen-local or stolen-system based on this value won't work. Split
system vs local stolen setup to fix this.
- kill all the region->devmem/is_devmem stuff. We already differentiate
the different types of stolen so such things shouldn't be needed
anymore.
v3:
- split stolen lmem vs smem ops(Tvrtko)
- add shortcut for stolen region in i915(Tvrtko)
- sanity check dsm base vs bar size(Xinyun)
v4(Tvrtko):
- more cleanup
- add some TODOs
Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xinyun Liu <xinyun.liu@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421104658.304142-1-matthew.auld@intel.com
|
|
Although this abstraction removes the convenience of grepping
for the file name, it:
- makes addition easier.
- makes it easier to tweak global path when experiments are needed.
- get in sync with guc/huc, without getting overly abstracted.
- allows future junction with CSR_VERSION for simplicity.
- Enforces dmc file will never change this standard.
v2: define DMC_PATH inside .c (Lucas)
Cc: Fei Yang <fei.yang@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com> #v1
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421094406.2017733-1-rodrigo.vivi@intel.com
|
|
Screen flickers on Innolux eDP 1.3 panel when clock rate 540000 is in use.
According to the panel vendor, though clock rate 540000 is advertised,
but the max clock rate it really supports is 270000.
Ville Syrjälä mentioned that fast and narrow also breaks some eDP 1.4
panel, so use slow and wide training for all panels to resolve the
issue.
User also confirmed that the new strategy doesn't introduce any
regression on XPS 9380.
v2:
- Use slow and wide for everything.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3384
References: https://gitlab.freedesktop.org/drm/intel/-/issues/272
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421052054.1434718-1-kai.heng.feng@canonical.com
|
|
Boot firmware performs memory training and health assessment during
startup. If the memory training fails, the firmware will consider the
GPU unusable and will instruct the punit to keep the GT powered down.
If this happens, our driver will be unable to communicate with the GT
(all GT registers will read back as 0, forcewake requests will timeout,
etc.) so we should abort driver initialization if this happens. We can
confirm that LMEM was initialized successfully via sgunit register
GU_CNTL.
Bspec: 53111
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Caz Yokoyama <Caz.Yokoyama@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210420131842.164163-5-matthew.auld@intel.com
|
|
into drm-intel-next-fixes
gvt-next-fixes-2021-04-21
- Remove one unused function warning (Jiapeng)
- Fix intel_gvt_init_device() return type (Dan)
- Remove one duplicated register accessible check (Zhenyu)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421094522.GU1551@zhen-hp.sh.intel.com
|
|
Looks this duplication was missed in code rebase. Remove extra check.
Cc: Yan Zhao <yan.y.zhao@intel.com>
Fixes: 02dd2b12a685 ("drm/i915/gvt: unify lri cmd handler and mmio handlers")
Reviewed-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210414084813.3763353-2-zhenyuw@linux.intel.com
|
|
pm_resume and pm_suspend might be conflict with the ones defined in
include/linux/suspend.h. Rename all pm_* to igt_pm_* in selftests since
they are only used here.
v2 by Jani:
- Use igt_ prefix instead of i915_ to avoid colliding with existing
i915_pm_* functions
- Rename all pm_ prefixed functions in the file
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210420130853.10573-1-jani.nikula@intel.com
|
|
Use simpler sentences. Just say "enable foo" instead
of "set foo to enabled" etc.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416171011.19012-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
'enable ? "enable" : "disable"' is a fairly common pattern in
our debug prints. Let's introduce a helper for it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416171011.19012-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Now that we have the dbuf slice mask stored in the device info
let's use it for for_each_dbuf_slice_in_mask*().
With this we cal also rip out intel_dbuf_size() and
intel_dbuf_num_slices().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416171011.19012-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Use intel_de_rmw() instead of hand rolling it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416171011.19012-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Use intel_dbuf_slice_size() instead of hand rolling it.
Also clean up some of the types.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416171011.19012-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|