summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/fsl-dcu
AgeCommit message (Collapse)AuthorFilesLines
2018-11-01drm/fsl-dcu: Use drm_fbdev_generic_setup()Noralf Trønnes2-23/+3
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@nxp.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Stefan Agner <stefan@agner.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-3-noralf@tronnes.org
2018-10-01drm/fsl-dcu: use drm_display_mode_to_videomode to calculate timing parametersSatendra Singh Thakur1-18/+14
Use the drm_display_mode_to_videomode function to calculate front/ back porches and sync length. Cc: Madhur Verma <madhur.verma@samsung.com> Cc: Hemanshu Srivastava <hemanshu.s@samsung.com> Signed-off-by: Satendra Singh Thakur <satendra.t@samsung.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180926204150.29829-2-stefan@agner.ch
2018-10-01drm/fsl-dcu: drop unused drm_crtc_index()Stefan Agner1-2/+1
The result of drm_crtc_index() is unused. Remove the call and the unused variable. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180926204150.29829-1-stefan@agner.ch
2018-09-26drm/fsl-dcu: Replace drm_dev_unref with drm_dev_putThomas Zimmermann1-4/+4
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Stefan Agner <stefan@agner.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180926114312.23097-1-tzimmermann@suse.de
2018-07-13drm: drop _mode_ from drm_mode_connector_attach_encoderDaniel Vetter1-1/+1
Again to align with the usual prefix of just drm_connector_. Again done with sed + manual fixup for indent issues. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-7-daniel.vetter@ffwll.ch
2018-07-10drm/panel: Make of_drm_find_panel() return an ERR_PTR() instead of NULLBoris Brezillon1-2/+3
Right now, the DRM panel logic returns NULL when a panel pointing to the passed OF node is not present in the list of registered panels. Most drivers interpret this NULL value as -EPROBE_DEFER, but we are about to modify the semantic of of_drm_find_panel() and let the framework return -ENODEV when the device node we're pointing to has a status property that is not equal to "okay" or "ok". Let's first patch the of_drm_find_panel() implementation to return ERR_PTR(-EPROBE_DEFER) instead of NULL and patch all callers to replace the '!panel' check by an 'IS_ERR(panel)' one. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-2-boris.brezillon@bootlin.com
2017-12-05drm/fsl-dcu: Use drm_mode_config_helper_suspend/resume()Noralf Trønnes2-20/+6
Replace driver's code with the generic helpers that do the same thing. Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@freescale.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Stefan Agner <stefan@agner.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171114212517.23536-5-noralf@tronnes.org
2017-11-24Merge tag 'drm-for-v4.15-part2' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2-7/+1
Pull more drm updates from Dave Airlie: "Fixes/cleanups for rc1, non-desktop flags for VR - remove the MSM dt-bindings file Rob managed to push in the previous pull. - add a property/edid quirk to denote HMD devices, I had these hanging around for a few weeks and Keith had done some work on them, they are fairly self contained and small, and only affect people using HTC Vive VR headsets so far. - amdgpu, tegra, tilcdc, fsl fixes - some imx-drm cleanups I missed, these seemed pretty small, and no reason to hold off. I have one TTM regression fix (fixes bochs-vga in qemu) sitting locally awaiting review I'll probably send that in a separate pull request tomorrow" * tag 'drm-for-v4.15-part2' of git://people.freedesktop.org/~airlied/linux: (33 commits) dt-bindings: remove file that was added accidentally drm/edid: quirk HTC vive headset as non-desktop. [v2] drm/fb: add support for not enabling fbcon on non-desktop displays [v2] drm: add connector info/property for non-desktop displays [v2] drm/amdgpu: fix rmmod KCQ disable failed error drm/amdgpu: fix kernel hang when starting VNC server drm/amdgpu: don't skip attributes when powerplay is enabled drm/amd/pp: fix typecast error in powerplay. drm/tilcdc: Remove obsolete "ti,tilcdc,slave" dts binding support drm/tegra: sor: Reimplement pad clock Revert "drm/radeon: dont switch vt on suspend" drm/amd/amdgpu: fix over-bound accessing in amdgpu_cs_wait_any_fence drm/amd/powerplay: fix unfreeze level smc message for smu7 drm/amdgpu:fix memleak drm/amdgpu:fix memleak in takedown drm/amd/pp: fix dpm randomly failed on Vega10 drm/amdgpu: set f_mapping on exported DMA-bufs drm/amdgpu: Properly allocate VM invalidate eng v2 drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume() drm/fsl-dcu: avoid disabling pixel clock twice on suspend ...
2017-11-16Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-1/+2
Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.15. Core: - Atomic object lifetime fixes - Atomic iterator improvements - Sparse/smatch fixes - Legacy kms ioctls to be interruptible - EDID override improvements - fb/gem helper cleanups - Simple outreachy patches - Documentation improvements - Fix dma-buf rcu races - DRM mode object leasing for improving VR use cases. - vgaarb improvements for non-x86 platforms. New driver: - tve200: Faraday Technology TVE200 block. This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in the StorLink SL3516 (later Cortina Systems CS3516) as well as the Grain Media GM8180. New bridges: - SiI9234 support New panels: - S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba LT089AC19000, Innolux AT043TN24 i915: - Remove Coffeelake from alpha support - Cannonlake workarounds - Infoframe refactoring for DisplayPort - VBT updates - DisplayPort vswing/emph/buffer translation refactoring - CCS fixes - Restore GPU clock boost on missed vblanks - Scatter list updates for userptr allocations - Gen9+ transition watermarks - Display IPC (Isochronous Priority Control) - Private PAT management - GVT: improved error handling and pci config sanitizing - Execlist refactoring - Transparent Huge Page support - User defined priorities support - HuC/GuC firmware refactoring - DP MST fixes - eDP power sequencing fixes - Use RCU instead of stop_machine - PSR state tracking support - Eviction fixes - BDW DP aux channel timeout fixes - LSPCON fixes - Cannonlake PLL fixes amdgpu: - Per VM BO support - Powerplay cleanups - CI powerplay support - PASID mgr for kfd - SR-IOV fixes - initial GPU reset for vega10 - Prime mmap support - TTM updates - Clock query interface for Raven - Fence to handle ioctl - UVD encode ring support on Polaris - Transparent huge page DMA support - Compute LRU pipe tweaks - BO flag to allow buffers to opt out of implicit sync - CTX priority setting API - VRAM lost infrastructure plumbing qxl: - fix flicker since atomic rework amdkfd: - Further improvements from internal AMD tree - Usermode events - Drop radeon support nouveau: - Pascal temperature sensor support - Improved BAR2 handling - MMU rework to support Pascal MMU exynos: - Improved HDMI/mixer support - HDMI audio interface support tegra: - Prep work for tegra186 - Cleanup/fixes msm: - Preemption support for a5xx - Display fixes for 8x96 (snapdragon 820) - Async cursor plane fixes - FW loading rework - GPU debugging improvements vc4: - Prep for DSI panels - fix T-format tiling scanout - New madvise ioctl Rockchip: - LVDS support omapdrm: - omap4 HDMI CEC support etnaviv: - GPU performance counters groundwork sun4i: - refactor driver load + TCON backend - HDMI improvements - A31 support - Misc fixes udl: - Probe/EDID read fixes. tilcdc: - Misc fixes. pl111: - Support more variants adv7511: - Improve EDID handling. - HDMI CEC support sii8620: - Add remote control support" * tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits) drm/rockchip: analogix_dp: Use mutex rather than spinlock drm/mode_object: fix documentation for object lookups. drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU drm/i915: Move init_clock_gating() back to where it was drm/i915: Prune the reservation shared fence array drm/i915: Idle the GPU before shinking everything drm/i915: Lock llist_del_first() vs llist_del_all() drm/i915: Calculate ironlake intermediate watermarks correctly, v2. drm/i915: Disable lazy PPGTT page table optimization for vGPU drm/i915/execlists: Remove the priority "optimisation" drm/i915: Filter out spurious execlists context-switch interrupts drm/amdgpu: use irq-safe lock for kiq->ring_lock drm/amdgpu: bypass lru touch for KIQ ring submission drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories() drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs() drm/amd/powerplay: initialize a variable before using it drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug drm/rockchip: add CONFIG_OF dependency for lvds ...
2017-11-14drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume()Stefan Agner1-1/+1
The resume helpers wait for a vblank to occurre hence IRQ need to be enabled. This avoids a warning as follows during resume: WARNING: CPU: 0 PID: 314 at drivers/gpu/drm/drm_atomic_helper.c:1249 drm_atomic_helper_wait_for_vblanks.part.1+0x284/0x288 [CRTC:28:crtc-0] vblank wait timed out Signed-off-by: Stefan Agner <stefan@agner.ch>
2017-11-14drm/fsl-dcu: avoid disabling pixel clock twice on suspendStefan Agner1-1/+0
With commit 0a70c998d0c5 ("drm/fsl-dcu: enable pixel clock when enabling CRTC") the pixel clock is controlled by the CRTC code. Disabling the pixel clock in suspend leads to a warning due to the second clk_disable_unprepare call: WARNING: CPU: 0 PID: 359 at drivers/clk/clk.c:594 clk_core_disable+0x8c/0x90 Remove clk_disable_unprepare call for pixel clock to avoid unbalanced clock disable on suspend. Fixes: 0a70c998d0c5 ("drm/fsl-dcu: enable pixel clock when enabling CRTC") Signed-off-by: Stefan Agner <stefan@agner.ch>
2017-11-14drm/fsl-dcu: Don't set connector DPMS propertyLaurent Pinchart1-5/+0
Since commit 4a97a3da420b ("drm: Don't update property values for atomic drivers") atomic drivers must not update property values as properties are read from the state instead. To catch remaining users, the drm_object_property_set_value() function now throws a warning when called by atomic drivers on non-immutable properties, and we hit that warning when creating connectors. The easy fix is to just remove the drm_object_property_set_value() as it is used here to set the initial value of the connector's DPMS property to OFF. The DPMS property applies on top of the connector's state crtc pointer (initialized to NULL) that is the main connector on/off control, and should thus default to ON. Fixes: 4a97a3da420b ("drm: Don't update property values for atomic drivers") Cc: stable@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Stefan Agner <stefan@agner.ch>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-01drm/fsl-dcu: Use drm_gem_fb_create()Noralf Trønnes1-1/+2
drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now, so use the function directly. Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@freescale.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-3-git-send-email-noralf@tronnes.org
2017-08-08drm: Nuke drm_atomic_helper_connector_dpmsDaniel Vetter1-1/+0
It's dead code, the core handles all this directly now. The only special case is nouveau and tda988x which used one function for both legacy modeset code and -nv50 atomic world instead of 2 vtables. But amounts to exactly the same. v2: Rebase over the panel/brideg refactorings in stm/ltdc. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Peter Senna Tschudin <peter.senna@collabora.com> Cc: Martin Donnelly <martin.donnelly@ge.com> Cc: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@freescale.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Marek Vasut <marex@denx.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Eric Anholt <eric@anholt.net> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Yakir Yang <kuankuan.y@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Romain Perier <romain.perier@collabora.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Hai Li <hali@codeaurora.org> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: zain wang <wzz@rock-chips.com> Cc: Baoyou Xie <baoyou.xie@linaro.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.ch Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Archit Taneja <architt@codeaurora.org> Tested-by: Philippe Cornu <philippe.cornu@st.com> (on stm) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Vincent Abriou <vincent.abriou@st.com>
2017-08-04drm/fsl-dcu: Use .dumb_map_offset and .dumb_destroy defaultsNoralf Trønnes1-2/+0
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@freescale.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Stefan Agner <stefan@agner.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-8-git-send-email-noralf@tronnes.org
2017-08-01drm: Plumb modifiers through plane initBen Widawsky1-1/+1
This is the plumbing for supporting fb modifiers on planes. Modifiers have already been introduced to some extent, but this series will extend this to allow querying modifiers per plane. Based on this, the client to enable optimal modifications for framebuffers. This patch simply allows the DRM drivers to initialize their list of supported modifiers upon initializing the plane. v2: A minor addition from Daniel v3: * Updated commit message * s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu) * Remove some excess newlines (Liviu) * Update comment for > 64 modifiers (Liviu) v4: Minor comment adjustments (Liviu) v5: Some new platforms added due to rebase v6: Add some missed plane inits (or maybe they're new - who knows at this point) (Daniel) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Daniel Stone <daniels@collabora.com> (v2) Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Stone <daniels@collabora.com>
2017-06-30drm: Add old state pointer to CRTC .enable() helper functionLaurent Pinchart1-2/+3
The old state is useful for drivers that need to perform operations at enable time that depend on the transition between the old and new states. While at it, rename the operation to .atomic_enable() to be consistent with .atomic_disable(), as the .enable() operation is used by atomic helpers only. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for imx-drm and mediatek Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> # for hdlcd and mali-dp Acked-by: Stefan Agner <stefan@agner.ch> # for fsl-dcu Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-2-laurent.pinchart+renesas@ideasonboard.com
2017-06-09drm/fsl-dcu: use new drm_atomic_helper_shutdownStefan Agner1-1/+1
Commit 18dddadc78c9 ("drm/atomic: Introduce drm_atomic_helper_shutdown") introduced a new helper to shutdown all CRTCs to replace the buggy drm_crtc_force_disable_all() function. Make use of the new atomic helper drm_atomic_helper_shutdown() to shutdown CRTCs. Signed-off-by: Stefan Agner <stefan@agner.ch>
2017-06-09drm/fsl-dcu: implement irq_preinstall/uninstall callbacksStefan Agner1-12/+8
Make use of the irq_preinstall/uninstall callback to clear and mask all interrupts. Use write 1 to clear as documented by the data sheet (writing a 0 seems to have cleared interrupt status too). Remove fsl_dcu_drm_irq_init and call drm_irq_install directly from fsl_dcu_load makes error handling a bit simpler. Do not set irq_enabled since drm_irq_install is taking care of it. Signed-off-by: Stefan Agner <stefan@agner.ch>
2017-06-09drm/fsl: Drop drm_vblank_cleanupDaniel Vetter1-2/+0
Again cleanup before irq disabling doesn't really stop the races, so just drop it. Proper fix would be to put drm_atomic_helper_shutdown before everything gets cleaned up. Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Stefan Agner <stefan@agner.ch>
2017-04-07drm: convert drivers to use drm_of_find_panel_or_bridgeRob Herring1-32/+12
Similar to the previous commit, convert drivers open coding OF graph parsing to use drm_of_find_panel_or_bridge instead. This changes some error messages to debug messages (in the graph core). Graph connections are often "no connects" depending on the particular board, so we want to avoid spurious messages. Plus the kernel is not a DT validator. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Archit Taneja <architt@codeaurora.org> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> [seanpaul dropped rockchip changes since they're now obsolete] Signed-off-by: Sean Paul <seanpaul@chromium.org>
2017-03-14drm: Create DEFINE_DRM_GEM_CMA_FOPS and roll it out to driversDaniel Vetter1-11/+1
Less code ftw. This converts all drivers except the tinydrm helper module. That one needs more work, since it gets the THIS_MODULE reference from tinydrm.ko instead of the actual driver module like it should. Probably needs a similar trick like I used here with generating the entire struct with a macro. Cc: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-24-daniel.vetter@ffwll.ch
2017-02-26Merge airlied/drm-next into drm-misc-nextDaniel Vetter1-5/+7
Backmerge the main pull request to sync up with all the newly landed drivers. Otherwise we'll have chaos even before 4.12 started in earnest. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2017-02-08drm: fsl-dcu: use vblank hooks in struct drm_crtc_funcsShawn Guo2-25/+26
The vblank hooks in struct drm_driver are deprecated and only meant for legacy drivers. For modern drivers with DRIVER_MODESET flag, the hooks in struct drm_crtc_funcs should be used instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Stefan Agner <stefan@agner.ch> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-10-git-send-email-shawnguo@kernel.org
2017-02-08drm/fsl-dcu: check for clk_prepare_enable() errorFabio Estevam1-2/+6
clk_prepare_enable() may fail, so we should better check its return value. Also place the of_node_put() function right after clk_prepare_enable(), in order to avoid calling of_node_put() twice in case clk_prepare_enable() fails. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Stefan Agner <stefan@agner.ch>
2017-02-08drm/fsl-dcu: remove unneeded 'ret' assignmentFabio Estevam1-3/+1
When devm_kzalloc() fails there is no need to assign an error code to the 'ret' variable as it will not be used after jumping to the 'err_node_put' label, so just remove the assignment. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by: Stefan Agner <stefan@agner.ch>
2017-02-07drm: remove drm_vblank_no_hw_counter assignment from driver codeShawn Guo1-1/+0
Core code already makes drm_driver.get_vblank_counter hook optional by letting drm_vblank_no_hw_counter be the default implementation for the function hook. So the drm_vblank_no_hw_counter assignment in the driver code becomes redundant and can be removed now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Eric Anholt <eric@anholt.net> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-3-git-send-email-shawnguo@kernel.org
2017-02-02drm: Rely on mode_config data for fb_helper initializationGabriel Krisman Bertazi1-1/+1
Instead of receiving the num_crts as a parameter, we can read it directly from the mode_config structure. I audited the drivers that invoke this helper and I believe all of them initialize the mode_config struct accordingly, prior to calling the fb_helper. I used the following coccinelle hack to make this transformation, except for the function headers and comment updates. The first and second rules are split because I couldn't find a way to remove the unused temporary variables at the same time I removed the parameter. // <smpl> @r@ expression A,B,D,E; identifier C; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ expression A,B,C,D,E; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ identifier r.C; type T; expression V; @@ - T C; <... when != C - C = V; ...> // </smpl> Changes since v1: - Rebased on top of the tip of drm-misc-next. - Remove mention to sti since a proper fix got merged. Suggested-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk
2017-01-09drm: Change the return type of the unload hook to voidGabriel Krisman Bertazi1-3/+1
The integer returned by the unload hook is ignored by the drm core, so let's make it void. This patch was created using the following Coccinelle semantic script (except for the declaration and comment in drm_drv.h): Compile-tested only. // <smpl> @ get_name @ struct drm_driver drv; identifier fn; @@ drv.unload = fn; @ replace_type @ identifier get_name.fn; @@ - int + void fn (...) { ... } @ remove_return_param @ identifier get_name.fn; @@ void fn (...) { <... if (...) return - ... ; ...> } @ drop_final_return @ identifier get_name.fn; @@ void fn (...) { ... - return 0; } // </smpl> Suggested-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Acked-by: Christian König <christian.koenig@amd.com>. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170106175731.29196-1-krisman@collabora.co.uk
2016-12-30drm: Deduplicate driver initialization messageGabriel Krisman Bertazi1-4/+0
Several DRM drivers print the same initialization message right after drm_dev_register, so move that to common code. The exception is i915, which uses its own register handle, so let it keep its own message. Notice that this was tested only with Exynos, but looks simple enough for the other drivers. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161228143216.26821-2-krisman@collabora.co.uk
2016-12-18drm: bridge: Link encoder and bridge in core codeLaurent Pinchart1-4/+1
Instead of linking encoders and bridges in every driver (and getting it wrong half of the time, as many drivers forget to set the drm_bridge encoder pointer), do so in core code. The drm_bridge_attach() function needs the encoder and optional previous bridge to perform that task, update all the callers. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Stefan Agner <stefan@agner.ch> # For DCU Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # For atmel-hlcdc Acked-by: Vincent Abriou <vincent.abriou@st.com> # For STI Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # For sun4i Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> # For hisilicon Acked-by: Jyri Sarha <jsarha@ti.com> # For tilcdc Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-4-git-send-email-laurent.pinchart+renesas@ideasonboard.com
2016-12-18drm: Don't include <drm/drm_encoder.h> in <drm/drm_crtc.h>Laurent Pinchart1-0/+2
<drm/drm_crtc.h> used to define most of the in-kernel KMS API. It has now been split into separate files for each object type, but still includes most other KMS headers to avoid breaking driver compilation. As a step towards fixing that problem, remove the inclusion of <drm/drm_encoder.h> from <drm/drm_crtc.h> and include it instead where appropriate. Also remove the forward declarations of the drm_encoder and drm_encoder_helper_funcs structures from <drm/drm_crtc.h> as they're not needed in the header. <drm/drm_encoder.h> now has to include <drm/drm_mode.h> and contain a forward declaration of struct drm_encoder in order to allow including it as the first header in a compilation unit. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sinclair Yeh <syeh@vmware.com> # For vmwgfx Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com
2016-12-15drm: Nuke fb->pixel_formatVille Syrjälä1-2/+2
Replace uses of fb->pixel_format with fb->format->format. Less duplicated information is a good thing. Note that coccinelle failed to eliminate the "/* fourcc format */" comment from drm_framebuffer.h, so I had to do that part manually. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - a->pixel_format + a->format->format | - b.pixel_format + b.format->format ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - a->fb->pixel_format + a->fb->format->format | - b.fb->pixel_format + b.fb->format->format ) @@ struct drm_crtc *CRTC; @@ ( - CRTC->primary->fb->pixel_format + CRTC->primary->fb->format->format | - CRTC->primary->state->fb->pixel_format + CRTC->primary->state->fb->format->format ) @@ struct drm_mode_set *set; @@ ( - set->fb->pixel_format + set->fb->format->format | - set->crtc->primary->fb->pixel_format + set->crtc->primary->fb->format->format ) @@ @@ struct drm_framebuffer { ... - uint32_t pixel_format; ... }; v2: Fix commit message (Laurent) Rebase due to earlier removal of many fb->pixel_format uses, including the 'fb->format = drm_format_info(fb->format->format);' snafu v3: Adjusted the semantic patch a bit and regenerated due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-14drm/fsl: don't use drm_put_devDaniel Vetter1-1/+2
fsl is already fully demidlayered in the probe function, but for convenience stuck with drm_put_dev. Call the unregister/unref parts separately, to make sure this driver works correct. v2: Rebase. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Stefan Agner <stefan@agner.ch> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161213175449.24525-1-daniel.vetter@ffwll.ch
2016-12-09Merge tag 'drm-fsl-dcu-for-next' of ↵Dave Airlie4-33/+18
http://git.agner.ch/git/linux-drm-fsl-dcu into drm-next Some fixes and cleanup, mainly around fbdev emulation. It also adds a new module parameter which allows to specify the color depth/bpp for the fbdev emulation (like the IMX DRM driver). * tag 'drm-fsl-dcu-for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu: drm/fsl-dcu: introduce kernel parameter to specify fbdev depth drm/fsl-dcu: remove separate compilation unit for fbdev emulation drm/fsl-dcu: Propagate the real error code drm/fsl-dcu: Remove unneeded NULL check drm/fsl-dcu: disable outputs before unloading driver drm/fsl-dcu: unload driver before disabling clocks
2016-12-06Merge remote-tracking branch 'airlied/drm-next' into drm-misc-nextDaniel Vetter3-11/+11
Backmerge v4.9-rc8 to get at commit e94bd1736f1f60e916a85a80c0b0ebeaae36cce5 Author: Michel Dänzer <michel.daenzer@amd.com> Date: Wed Nov 30 17:30:01 2016 +0900 drm: Don't call drm_for_each_crtc with a non-KMS driver so I can apply Michel's follow-up patch. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-12-05Backmerge tag 'v4.9-rc8' into drm-nextDave Airlie3-11/+11
Linux 4.9-rc8 Daniel requested this so we could apply some follow on fixes cleanly to -next.
2016-12-01drm: Make the connector .detect() callback optionalLaurent Pinchart1-7/+0
Many drivers (21 to be exact) create connectors that are always connected (for instance to an LVDS or DSI panel). Instead of forcing them to implement a dummy .detect() handler, make the callback optional and consider the connector as always connected in that case. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jyri Sarha <jsarha@ti.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Vincent Abriou <vincent.abriou@st.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [seanpaul fixed small conflict in rcar-du/rcar_du_lvdscon.c] Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-11-29drm/fsl-dcu: introduce kernel parameter to specify fbdev depthStefan Agner1-1/+15
Add a kernel parameter legancyfb_depth (like the i.MX drm driver) to control the legancy fbdev depth. Default to the so far hard coded depth of 24-bit. Currently changing the framebuffer depth is not possible from user space when using the fbdev emulation layer... This provides a rudimentary mechanism to change depth without having to change kernel code. Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-11-29drm/fsl-dcu: remove separate compilation unit for fbdev emulationStefan Agner4-26/+1
The separate file fsl_dcu_drm_fbdev.c only initialized fbdev emulation which is a one-line operation. There is not much more code on sight which justifies a separate file, hence call the initialization helper directly from the drv file. Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-11-29drm/fsl-dcu: Propagate the real error codeFabio Estevam1-1/+1
In case of platform_get_irq() failure, let's propagate the real error code, instead of a 'fake' one. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-11-29drm/fsl-dcu: Remove unneeded NULL checkFabio Estevam1-5/+0
devm_ioremap_resource() performs NULL check for the 'res' argument, so remove the unneeded check. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-11-29drm/fsl-dcu: disable outputs before unloading driverStefan Agner1-0/+1
Make sure that all outputs are disabled before unloading the DRM driver. Otherwise vblank handling is not shut down properly and warnings such as this appear: WARNING: CPU: 0 PID: 540 at drivers/gpu/drm/drm_irq.c:339 drm_vblank_cleanup+0x5c/0x94 Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-11-29drm/fsl-dcu: unload driver before disabling clocksStefan Agner1-1/+1
Use drm_put_dev to unload the driver before disabling clocks. Otherwise the driver might read a register during unload which leads to an external abort. Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-11-09drm/fsl-dcu: disable planes before disabling CRTCStefan Agner1-2/+6
After disabling and reenabling the CRTC the DCU sometimes got stuck displaying the whole screen with a solid color. Disabling and reenabling the CRTC did not recover from the situation. This was often reproducable by just restarting the X-Server. The disabling sequence is not explicitly documented. But it turns out that disabling the planes before disabling the CRTC seems to prevent the above situation from happening. Use the callback ->atomic_disable instead of ->disable which allows to use the drm_atomic_helper_disable_planes_on_crtc() helper to disable planes before disabling the controller. Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-11-09drm/fsl-dcu: update all registers on flushStefan Agner2-5/+5
Use the UPDATE_MODE READREG bit to initiate a register transfer on flush. This makes sure that we flush all registers only once for all planes. Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-11-09drm/fsl-dcu: do not update when modifying irq registersStefan Agner1-4/+0
The IRQ status and mask registers are not "double buffered" according to the reference manual. Hence, there is no extra transfer/update write needed when modifying these registers. Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-11-02drm: define drm_compat_ioctl NULL on CONFIG_COMPAT=n and reduce #ifdefsJani Nikula1-2/+0
If we define drm_compat_ioctl NULL on CONFIG_COMPAT=n, we don't have to check for the config everywhere. Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1478014844-27454-1-git-send-email-jani.nikula@intel.com
2016-10-20drm/fsl-dcu: enable pixel clock when enabling CRTCStefan Agner2-20/+3
The pixel clock should not be on if the CRTC is not in use, hence move clock enable/disable calls into CRTC callbacks. Signed-off-by: Stefan Agner <stefan@agner.ch> Tested-By: Meng Yi <meng.yi@nxp.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-15 07:09:13 +0300