summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/exynos
AgeCommit message (Collapse)AuthorFilesLines
2014-09-10drm: add driver->set_busid() callbackDavid Herrmann1-0/+1
One step closer to dropping all the drm_bus_* code: Add a driver->set_busid() callback and make all drivers use the generic helpers. Nouveau is the only driver that uses two different bus-types with the same drm_driver. This is totally broken if both buses are available on the same machine (unlikely, but lets be safe). Therefore, we create two different drivers for each platform during module_init() and set the set_busid() callback respectively. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-08-08Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds21-357/+801
Pull DRM updates from Dave Airlie: "Like all good pull reqs this ends with a revert, so it must mean we tested it, [ Ed. That's _one_ way of looking at it ] This pull is missing nouveau, Ben has been stuck trying to track down a very longstanding bug that revealed itself due to some other changes. I've asked him to send you a direct pull request for nouveau once he cleans things up. I'm away until Monday so don't want to delay things, you can make a decision on that when he sends it, I have my phone so I can ack things just not really merge much. It has one trivial conflict with your tree in armada_drv.c, and also the pull request contains some component changes that are already in your tree, the base tree from Russell went via Greg's tree already, but some stuff still shows up in here that doesn't when I merge my tree into yours. Otherwise all pretty standard graphics fare, one new driver and changes all over the place. New drivers: - sti kms driver for STMicroelectronics chipsets stih416 and stih407. core: - lots of cleanups to the drm core - DP MST helper code merged - universal cursor planes. - render nodes enabled by default panel: - better panel interfaces - new panel support - non-continuous cock advertising ability ttm: - shrinker fixes i915: - hopefully ditched UMS support - runtime pm fixes - psr tracking and locking - now enabled by default - userptr fixes - backlight brightness fixes - MST support merged - runtime PM for dpms - primary planes locking fixes - gen8 hw semaphore support - fbc fixes - runtime PM on SOix sleep state hw. - mmio base page flipping - lots of vlv/chv fixes. - universal cursor planes radeon: - Hawaii fixes - display scalar support for non-fixed mode displays - new firmware format support - dpm on more asics by default - GPUVM improvements - uncached and wc GTT buffers - BOs > visible VRAM exynos: - i80 interface support - module auto-loading - ipp driver consolidated. armada: - irq handling in crtc layer only - crtc renumbering - add component support - DT interaction changes. tegra: - load as module fixes - eDP bpp and sync polarity fixed - DSI non-continuous clock mode support - better support for importing buffers from nouveau msm: - mdp5/adq8084 v1.3 hw enablement - devicetree clk changse - ifc6410 board working tda998x: - component support - DT documentation update vmwgfx: - fix compat shader namespace" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (551 commits) Revert "drm: drop redundant drm_file->is_master" drm/panel: simple: Use devm_gpiod_get_optional() drm/dsi: Replace upcasting macro by function drm/panel: ld9040: Replace upcasting macro by function drm/exynos: dp: Modify driver to support drm_panel drm/exynos: Move DP setup into commit() drm/panel: simple: Add AUO B133HTN01 panel support drm/panel: simple: Support delays in panel functions drm/panel: simple: Add proper definition for prepare and unprepare drm/panel: s6e8aa0: Add proper definition for prepare and unprepare drm/panel: ld9040: Add proper definition for prepare and unprepare drm/tegra: Add support for panel prepare and unprepare routines drm/exynos: dsi: Add support for panel prepare and unprepare routines drm/exynos: dpi: Add support for panel prepare and unprepare routines drm/panel: simple: Add dummy prepare and unprepare routines drm/panel: s6e8aa0: Add dummy prepare and unprepare routines drm/panel: ld9040: Add dummy prepare and unprepare routines drm/panel: Provide convenience wrapper for .get_modes() drm/panel: add .prepare() and .unprepare() functions drm/panel: simple: Remove simple-panel compatible ...
2014-08-07Merge tag 'drm/panel/for-3.17-rc1' of ↵Dave Airlie5-30/+107
git://anongit.freedesktop.org/tegra/linux into drm-next drm/panel: Changes for v3.17-rc1 Panels can now be more finely controlled via .prepare() and .unprepare() callbacks in addition to .enable() and .disable(). New kerneldoc details what they are supposed to do and when they should be called. The simple panel driver gained support for a couple of new panels and it is now possible to specify additional delays during power up and power down sequences if panels require it. DSI devices can now advertise that they support non-continuous clock mode which will allow DSI host controllers to disable the high speed clock after transmissions to save power. * tag 'drm/panel/for-3.17-rc1' of git://anongit.freedesktop.org/tegra/linux: (30 commits) drm/panel: simple: Use devm_gpiod_get_optional() drm/dsi: Replace upcasting macro by function drm/panel: ld9040: Replace upcasting macro by function drm/exynos: dp: Modify driver to support drm_panel drm/exynos: Move DP setup into commit() drm/panel: simple: Add AUO B133HTN01 panel support drm/panel: simple: Support delays in panel functions drm/panel: simple: Add proper definition for prepare and unprepare drm/panel: s6e8aa0: Add proper definition for prepare and unprepare drm/panel: ld9040: Add proper definition for prepare and unprepare drm/tegra: Add support for panel prepare and unprepare routines drm/exynos: dsi: Add support for panel prepare and unprepare routines drm/exynos: dpi: Add support for panel prepare and unprepare routines drm/panel: simple: Add dummy prepare and unprepare routines drm/panel: s6e8aa0: Add dummy prepare and unprepare routines drm/panel: ld9040: Add dummy prepare and unprepare routines drm/panel: Provide convenience wrapper for .get_modes() drm/panel: add .prepare() and .unprepare() functions drm/panel: simple: Remove simple-panel compatible drm/panel: simple: Add Innolux N116BGE panel support ...
2014-08-06drm/exynos: dp: Modify driver to support drm_panelAjay Kumar3-21/+71
Add drm_panel controls to support powerup/down of the eDP panel, if one is present at the sink side. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-08-06drm/exynos: Move DP setup into commit()Ajay Kumar1-5/+19
Add commit callback for exynos_dp, and move the DP link training, video configuration code from the hotplug handler into commit(). Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-08-06drm/exynos: dsi: Add support for panel prepare and unprepare routinesAjay Kumar1-2/+11
Modify exynos_dsi driver to support the new panel calls: prepare and unprepare. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-08-06drm/exynos: dpi: Add support for panel prepare and unprepare routinesAjay Kumar1-2/+6
Modify exynos_dpi driver to support the new panel calls: prepare and unprepare. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-08-04drm/exynos: g2d: let exynos_g2d_get_ver_ioctl failTobias Jakobi1-0/+15
Currently the DRM_IOCTL_EXYNOS_G2D_GET_VER ioctl always succeeds, even if no G2D support is available. Let the ioctl fail when this is the case, so that userspace can accurately probe for G2D support. This also fixes the exynos tests in libdrm. There 'g2d_init' doesn't fail when G2D is absent, leading to a segfault later. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: INki Dae <inki.dae@samsung.com>
2014-08-04drm/exynos: g2d: make ioctls more robustTobias Jakobi1-2/+10
Both exynos_g2d_set_cmdlist_ioctl and exynos_g2d_exec_ioctl don't check if the G2D was succesfully probe. If that is not the case, then g2d_priv is just NULL and extracting 'dev' from it in the next step is going to produce a kernel oops. Add proper checks and return ENODEV if the G2D is not available. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: INki Dae <inki.dae@samsung.com>
2014-08-04drm/exynos: hdmi: add null check for hdmiphy_portSeung-Woo Kim1-1/+2
The hdmiphy can be apb and hdmiphy_port can be null. So before accessing hdmiphy_port, it should be checked. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-04drm/exynos: control blending of mixer graphic layer 0Joonyoung Shim1-0/+5
The mixer graphic layer 0 isn't blended as default by commit 0377f4ed9f1aed30292c4e3c87f24e028ae26f36(drm/exynos: Don't blend mixer layer 0). But it needs to be blended with graphic layer 0 if video layer is enabled by vp because video layer is bottom. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-04drm/exynos: Add MODULE_DEVICE_TABLE entries for various componentsSjoerd Simons4-0/+4
Add MODULE_DEVICE_TABLE calls for the various OF match tables that currently don't have one. This allows the module to be autoloaded based on devicetree information. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-04Subject: Revert "drm/exynos: remove MODULE_DEVICE_TABLE definitions"Sjoerd Simons2-0/+2
This reverts commit d089621896c3530a9bd309f96e9c9124d07f6c3f was original to prevent multiple MODULE_DEVICE_TABLE in one module. Which, as a side-effect broke autoloading of the module. Since 21bdd17b21b45ea48e06e23918d681afbe0622e9 it is possible to have multiple calls to MODULE_DEVICE_TABLE, so the patch can be reverted to restore support for autoloading Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-04Subject: Revert "drm/exynos: fix module build error"Sjoerd Simons2-0/+2
Since 21bdd17b21b45ea48e06e23918d681afbe0622e9 it is possible to have multiple calls to MODULE_DEVICE_TABLE, so the patch can be reverted to restore support for autoloading Conflicts: drivers/gpu/drm/exynos/exynos_drm_fimd.c drivers/gpu/drm/exynos/exynos_drm_g2d.c Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos/ipp: simplify ipp_find_driverAndrzej Hajda1-53/+21
The patch puts repeated code sequence into one function, removes verbose comments and decreases log verbosity. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos/ipp: simplify ipp_create_idAndrzej Hajda1-19/+9
There is no gain in passing id by pointer to be filled. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos/ipp: remove redundant messagesAndrzej Hajda1-11/+4
In case of error callback prints already corresponding message. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos/ipp: simplify ipp_find_objAndrzej Hajda1-18/+8
The patch simplifies ipp_find_obj and removes debug messages. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos/ipp: remove useless registration checksAndrzej Hajda1-6/+0
Argument checks are redundant, clients always check ippdrv before calling these functions. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos/ipp: simplify memory check functionAndrzej Hajda1-34/+10
The only thing function should check is if there are buffers in respective queues. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos/ipp: remove incorrect checks of list_first_entry resultAndrzej Hajda1-15/+0
list_first_entry does not return NULL on empty list so this check does not make sense. Moreover there is already code which prevents calling list_first_entry on empty lists. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos/ipp: remove temporary variableAndrzej Hajda1-8/+6
There is no reason to allocate intermediate variable. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos/ipp: correct address typeAndrzej Hajda1-2/+3
exynos_drm_gem_get_dma_addr returns dma_addr_t, type casting to void* and back is not necessary. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos/ipp: remove struct exynos_drm_ipp_privateAndrzej Hajda3-28/+12
struct exynos_drm_ipp_private contains only one pointer so all occurrences of the struct can be replaced by the pointer itself. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos/ipp: remove unused field from exynos_drm_ipp_privateAndrzej Hajda2-3/+0
The patch removes unused event_list field from struct exynos_drm_ipp_private. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos/ipp: remove type castingAndrzej Hajda1-1/+1
The patch replaces type casting with proper pointer. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos: g2d: add exynos4212 as a compatible device.Alban Browaeys1-0/+1
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos: dsi: add driver data to support Exynos5410/5420/5440 SoCsYoungJun Cho1-22/+135
The offset of register DSIM_PLLTMR_REG in Exynos5410 / 5420 / 5440 SoCs is different from the one in Exynos4 SoCs. In case of Exynos5410 / 5420 / 5440 SoCs, there is no frequency band bit in DSIM_PLLCTRL_REG, and it uses DSIM_PHYCTRL_REG and DSIM_PHYTIMING*_REG instead. So this patch adds driver data to distinguish it. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos: fimd: support LCD I80 interfaceYoungJun Cho2-44/+233
To support MIPI command mode based I80 interface panel, FIMD should do followings: - Sets LCD I80 interface timings configuration. - Uses "lcd_sys" as an IRQ resource and sets relevant IRQ configuration. - Sets LCD block configuration for I80 interface. - Sets ideal(pixel) clock is 2 times faster than the original one to generate frame done IRQ prior to the next TE signal. - Implements trigger feature that transfers image data if there is page flip request, and implements TE handler to call trigger function. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos: dsi: add TE interrupt handler to support LCD I80 interfaceYoungJun Cho1-2/+96
This is a temporary solution and should be made by more generic way. To support LCD I80 interface, the DSI host should register TE interrupt handler from the TE GPIO of attached panel. So the panel generates a tearing effect synchronization signal then the DSI host calls the CRTC device manager to trigger to transfer video image. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos: add TE handler to support LCD I80 interfaceYoungJun Cho3-0/+18
To support LCD I80 interface, the panel should generate Tearing Effect synchronization signal between MCU and FB to display video images. And the display controller should trigger to transfer video image at this signal. So the panel receives the TE IRQ, then calls these handler chains to notify it to the display controller. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos: use wait_event_timeout() for safety usageYoungJun Cho1-2/+5
There could be the case that the page flip operation isn't finished correctly with some abnormal condition such as panel reset. So this patch replaces wait_event() with wait_event_timeout() to avoid waiting for page flip completion infinitely. And clears exynos_crtc->pending_flip in exynos_drm_crtc_page_flip() when exynos_drm_crtc_mode_set_commit() is failed. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos: dsi: move the EoT packets configuration pointYoungJun Cho1-2/+12
This configuration could be used in MIPI DSI command mode also. And adds user manual description for display configuration. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos: hdmi: enable exynos 4210 and 4x12 soc supportMarek Szyprowski2-15/+46
Configuration sets for Exynos 4210 and 4x12 SoC were already defined in Exynos HDMI and Mixed drivers, but they lacked proper linking to device tree 'compatible' values. This patch fixes this issue adding support for following compatible values: samsung,exynos4210-mixer, samsung,exynos4212-mixer and samsung,exynos4210-hdmi. It also corrects access to sclk_mixer clock, which is available only on Exynos 4210. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos: hdmi: make 'hdmi-en' regulator optional and keep it enabledMarek Szyprowski1-1/+18
HDMI_EN regulator is additional regulator for providing voltage source for DCC lines available on HDMI connector. When there is no power provided for DDC epprom, some TV-sets do not pulls up HPD (hot plug detect) line, what causes HDMI block to stay turned off. This patch enables HDMI_EN regulator (if available) on driver probe and keep it enabled all the time to let TV-set correctly signal HPD event. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos: dp: Use correct module licenseJingoo Han1-1/+1
According to the header comment in the source file, the driver is licensed under GPL v2, so update MODULE_LICENSE() to match that. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos: Remove unused variable in exynos_drm_gem.cSachin Kamat1-3/+0
'exynos_gem_obj' is not used in the function. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos: Remove unused variable from exynos_hdmi.cSachin Kamat1-2/+1
'frame_size_code' is not used in the function. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03drm/exynos: Fix NULL pointer exception when suspending without componentsKrzysztof Kozlowski1-2/+2
Fix a NULL pointer exception when main exynos drm driver was probed successfully but no components were added (e.g. by incomplete DTS). In such case the exynos_drm_load() is never called and drvdata is NULL. The NULL pointer exception may theoretically also happen as a effect of race between adding components and main driver: if suspend of the driver happens before adding components. Trace: [ 1.190295] [drm] Initialized drm 1.1.0 20060810 [ 1.195209] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully. (...) [ 24.001743] PM: Syncing filesystems ... done. [ 24.002177] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 24.007403] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 24.032559] Unable to handle kernel NULL pointer dereference at virtual address 00000134 [ 24.035007] pgd = dedd8000 [ 24.037734] [00000134] *pgd=5ee13831, *pte=00000000, *ppte=00000000 [ 24.043953] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 24.049329] Modules linked in: [ 24.052371] CPU: 0 PID: 1 Comm: sh Not tainted 3.16.0-rc3-00035-geba20bbdde04-dirty #51 [ 24.060354] task: df478000 ti: df480000 task.ti: df480000 [ 24.065743] PC is at mutex_lock+0x10/0x50 [ 24.069733] LR is at drm_modeset_lock_all+0x30/0xbc [ 24.074590] pc : [<c048516c>] lr : [<c02a14b4>] psr: a0000013 [ 24.074590] sp : df481db8 ip : 00000000 fp : c05e524c [ 24.086045] r10: 00000002 r9 : c02c1fe4 r8 : deca5e44 [ 24.091253] r7 : 00000000 r6 : 00000000 r5 : 0000014c r4 : 00000134 [ 24.097763] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : 00000134 [ 24.104275] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 24.111391] Control: 10c53c7d Table: 5edd806a DAC: 00000015 [ 24.117120] Process sh (pid: 1, stack limit = 0xdf480240) [ 24.122502] Stack: (0xdf481db8 to 0xdf482000) [ 24.126843] 1da0: dee01d80 c02a14b4 [ 24.135004] 1dc0: 00000000 00000000 c07aff98 c02aec7c 00000002 00000000 00000000 c07aff98 [ 24.143164] 1de0: deca5e10 c02aecf4 c02aecd4 c02c2010 00000000 c02c9470 00000000 00000000 [ 24.151322] 1e00: 00000000 00000000 deca5e10 deca5e10 00000000 c07aff98 00000002 deca5e44 [ 24.159482] 1e20: c06d8f78 c06fb800 deca5e78 c02ca660 df7baf00 007b0aa0 deca5e10 c06fb7c8 [ 24.167641] 1e40: c07aff98 00000000 00000002 c02cbe18 9757aec5 00000005 9757aec5 00000005 [ 24.175801] 1e60: ded1d380 00000003 00000003 c05c74d8 ded1d380 c07209d4 c05c7514 c07105d8 [ 24.183960] 1e80: 01e2a738 c0068a74 00000000 c05c7514 ded1d380 c071c6e0 00000004 c07105d8 [ 24.192119] 1ea0: 01e2a738 c047f1e0 c0600cc0 df481ec4 00000003 00000000 00000003 c05c74d8 [ 24.200278] 1ec0: ded1d380 c071c6e0 c05c7514 c07105d8 01e2a738 c0069444 c06d905c 00000003 [ 24.208438] 1ee0: 00000003 ded1d380 c06d9064 00000004 c05c3fc0 c0067d4c df535ab0 ded1d380 [ 24.216596] 1f00: df481f80 ded1d380 00000004 ded1d1cc ded1d1c0 c0221724 00000004 c016ca6c [ 24.224756] 1f20: c016ca28 00000000 00000000 c016c1d4 00000000 00000000 b6f37000 df481f80 [ 24.232915] 1f40: decedd80 00000004 df480000 df480000 b6f37000 c0110920 df47839c 60000013 [ 24.241074] 1f60: 00000000 00000000 decedd80 decedd80 00000004 df480000 b6f37000 c0110da8 [ 24.249233] 1f80: 00000000 00000000 00000004 b6edf5d8 00000004 b6f37000 00000004 c000f2a8 [ 24.257393] 1fa0: 00001000 c000f0e0 b6edf5d8 00000004 00000001 b6f37000 00000004 00000000 [ 24.265551] 1fc0: b6edf5d8 00000004 b6f37000 00000004 00000004 00000001 00000000 01e2a738 [ 24.273711] 1fe0: 00000000 beba0a20 b6e1f4f0 b6e7022c 60000010 00000001 ffffffff ffffffff [ 24.281885] [<c048516c>] (mutex_lock) from [<c02a14b4>] (drm_modeset_lock_all+0x30/0xbc) [ 24.289950] [<c02a14b4>] (drm_modeset_lock_all) from [<c02aec7c>] (exynos_drm_suspend+0xc/0x64) [ 24.298627] [<c02aec7c>] (exynos_drm_suspend) from [<c02aecf4>] (exynos_drm_sys_suspend+0x20/0x34) [ 24.307568] [<c02aecf4>] (exynos_drm_sys_suspend) from [<c02c2010>] (platform_pm_suspend+0x2c/0x54) [ 24.316597] [<c02c2010>] (platform_pm_suspend) from [<c02c9470>] (dpm_run_callback+0x48/0x170) [ 24.325188] [<c02c9470>] (dpm_run_callback) from [<c02ca660>] (__device_suspend+0x128/0x39c) [ 24.333606] [<c02ca660>] (__device_suspend) from [<c02cbe18>] (dpm_suspend+0x5c/0x314) [ 24.341506] [<c02cbe18>] (dpm_suspend) from [<c0068a74>] (suspend_devices_and_enter+0x8c/0x598) [ 24.350185] [<c0068a74>] (suspend_devices_and_enter) from [<c0069444>] (pm_suspend+0x4c4/0x5d0) [ 24.358862] [<c0069444>] (pm_suspend) from [<c0067d4c>] (state_store+0x70/0xd4) [ 24.366156] [<c0067d4c>] (state_store) from [<c0221724>] (kobj_attr_store+0x14/0x20) [ 24.373885] [<c0221724>] (kobj_attr_store) from [<c016ca6c>] (sysfs_kf_write+0x44/0x48) [ 24.381867] [<c016ca6c>] (sysfs_kf_write) from [<c016c1d4>] (kernfs_fop_write+0xc0/0x17c) [ 24.390027] [<c016c1d4>] (kernfs_fop_write) from [<c0110920>] (vfs_write+0xa0/0x1c4) [ 24.397750] [<c0110920>] (vfs_write) from [<c0110da8>] (SyS_write+0x40/0x8c) [ 24.404782] [<c0110da8>] (SyS_write) from [<c000f0e0>] (ret_fast_syscall+0x0/0x3c) [ 24.412332] Code: e92d4010 e1a04000 f57ff05b f590f000 (e1903f9f) [ 24.418448] ---[ end trace cfa06690eabe8dd5 ]--- [ 24.423032] Kernel panic - not syncing: Fatal exception [ 24.428220] CPU1: stopping [ 24.430905] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.16.0-rc3-00035-geba20bbdde04-dirty #51 [ 24.440549] [<c0016440>] (unwind_backtrace) from [<c001294c>] (show_stack+0x10/0x14) [ 24.448269] [<c001294c>] (show_stack) from [<c04811e8>] (dump_stack+0x80/0xcc) [ 24.455472] [<c04811e8>] (dump_stack) from [<c001495c>] (handle_IPI+0x130/0x15c) [ 24.462850] [<c001495c>] (handle_IPI) from [<c000862c>] (gic_handle_irq+0x60/0x68) [ 24.470400] [<c000862c>] (gic_handle_irq) from [<c0013440>] (__irq_svc+0x40/0x70) [ 24.477860] Exception stack(0xdf4bdf88 to 0xdf4bdfd0) [ 24.482898] df80: ffffffed 00000000 00000000 00000000 df4bc000 c06d042c [ 24.491058] dfa0: 00000000 ffffffed c06d03c0 00000000 c070c288 00000000 00000000 df4bdfd0 [ 24.499214] dfc0: c0010324 c0010328 60000013 ffffffff [ 24.504254] [<c0013440>] (__irq_svc) from [<c0010328>] (arch_cpu_idle+0x28/0x30) [ 24.511634] [<c0010328>] (arch_cpu_idle) from [<c005f110>] (cpu_startup_entry+0x2c4/0x3f0) [ 24.519878] [<c005f110>] (cpu_startup_entry) from [<400086c4>] (0x400086c4) [ 24.526821] ---[ end Kernel panic - not syncing: Fatal exception Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-07-18drm/exynos: use helpersRob Clark1-14/+1
Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-09dma-buf: use reservation objectsMaarten Lankhorst1-1/+1
This allows reservation objects to be used in dma-buf. it's required for implementing polling support on the fences that belong to a dma-buf. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> #drivers/media/v4l2-core/ Acked-by: Thomas Hellstrom <thellstrom@vmware.com> #drivers/gpu/drm/ttm Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> #drivers/gpu/drm/armada/ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-08drm: Introduce drm_fb_helper_prepare()Thierry Reding1-1/+2
To implement hotplug detection in a race-free manner, drivers must call drm_kms_helper_poll_init() before hotplug events can be triggered. Such events can be triggered right after any of the encoders or connectors are initialized. At the same time, if the drm_fb_helper_hotplug_event() helper is used by a driver, then the poll helper requires some parts of the FB helper to be initialized to prevent a crash. At the same time, drm_fb_helper_init() requires information that is not necessarily available at such an early stage (number of CRTCs and connectors), so it cannot be used yet. Add a new helper, drm_fb_helper_prepare(), that initializes the bare minimum needed to allow drm_kms_helper_poll_init() to execute and any subsequent hotplug events to be processed properly. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm: Constify struct drm_fb_helper_funcsThierry Reding1-1/+1
There's no need for this to be modifiable. Make it const so that it can be put into the .rodata section. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08Merge tag 'topic/core-stuff-2014-06-30' of ↵Dave Airlie8-15/+9
git://anongit.freedesktop.org/drm-intel into drm-next misc core patches picked up by Daniel and Jani. * tag 'topic/core-stuff-2014-06-30' of git://anongit.freedesktop.org/drm-intel: drm/fb-helper: Remove unnecessary list empty check in drm_fb_helper_debug_enter() drm/fb-helper: Redundant info->fix.type_aux setting in drm_fb_helper_fill_fix() drm/debugfs: add an "edid_override" file per connector drm/debugfs: add a "force" file per connector drm: add register and unregister functions for connectors drm: fix uninitialized acquire_ctx fields (v2) drm: Driver-specific ioctls range from 0x40 to 0x9f drm: Don't export internal module variables
2014-06-24drm/exynos: enable vsync interrupt while waiting for vblankRahul Sharma1-0/+4
mixer_wait_for_vblank function expects that the upcoming vsync interrupt handler routine will clear the wait_vsync_event atomic variable. For this to happen, interrupts should be enabled and disabled properly. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-24drm/exynos: soft reset mixer before reconfigure after power-onRahul Sharma1-0/+2
Mixer soft reset is a recommended step before reconfiguring the mixer after power on. Mixer looses the previous state of DMAs if soft reset. This is the recommendation from the hardware team. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-24drm/exynos: allow multiple layer updates per vsync for mixerRahul Sharma1-6/+1
Allowing only one layer update per vsync can cause issues while there are update available for both layers. There is a good amount of possibility to loose updates if we allow single update per vsync. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-24drm/exynos: stop mixer before gating clocks during poweroffRahul Sharma2-0/+16
Mixer should be power gated only after it is gracefully stopped. The recommended sequence is to Stop the mixer and wait till it enters to IDLE state before gating the clocks and power to the mixer. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-24drm/exynos: set power state variable after enabling clocks and powerRahul Sharma1-9/+13
Power state variable holds the state of the mixer device. Power on and power off functions are toggling these variable at wrong place. State variable should be changed to true only after Runtime PM and clocks are enabled. Else it may result to a situation where mixer registers are accessed with device power enabled. Similar logic for poweroff sequence. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-24drm/exynos: disable unused windows on applyAndrzej Hajda1-0/+2
The patch disables non-enabled HW windows on applying configuration, it will allow to clear windows enabled by bootloader. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-29 19:32:49 +0300