summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/drm_fb_helper.c
AgeCommit message (Collapse)AuthorFilesLines
2020-01-20Backmerge v5.5-rc7 into drm-nextDave Airlie1-1/+6
msm needs 5.5-rc4, go to the latest. Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-01-09Merge drm/drm-next into drm-intel-next-queuedJani Nikula1-173/+29
Sync with drm-next to get the new logging macros, among other things. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-01-07drm/fb-helper: Round up bits_per_pixel if possibleGeert Uytterhoeven1-1/+6
When userspace requests a video mode parameter value that is not supported, frame buffer device drivers should round it up to a supported value, if possible, instead of just rejecting it. This allows applications to quickly scan for supported video modes. Currently this rule is not followed for the number of bits per pixel, causing e.g. "fbset -depth N" to fail, if N is smaller than the current number of bits per pixel. Fix this by returning an error only if bits per pixel is too large, and setting it to the current value otherwise. See also Documentation/fb/framebuffer.rst, Section 2 (Programmer's View of /dev/fb*"). Fixes: 865afb11949e5bf4 ("drm/fb-helper: reject any changes to the fbdev") Cc: stable@vger.kernel.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191230132734.4538-1-geert+renesas@glider.be
2019-12-30drm: Handle connector tile support only for modes that match tile sizeManasi Navare1-1/+3
DRM Fb driver expects multiple CRTCs if it sees connector->has_tile is set, but we need to handle tile support and look for multiple CRTCs only for the modes that match the tile size. The other modes should be able to be displayed without tile support or uisng single CRTC. This patch adds the check to match the tile size with requested mode to handle the tile support. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191211212433.18185-1-manasi.d.navare@intel.com
2019-12-19drm/fb-helper: convert to drm device based loggingJani Nikula1-16/+20
Prefer drm_dbg_kms(), drm_info(), and drm_err() over all other logging. This is about KMS so switch to the KMS category while at it. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191210123050.8799-3-jani.nikula@intel.com
2019-12-05drm: constify fb ops across all driversJani Nikula1-1/+1
Now that the fbops member of struct fb_info is const, we can start making the ops const as well. Cc: dri-devel@lists.freedesktop.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/59b43629ac60031c5bbf961d8c49695019bc9c6f.1575390740.git.jani.nikula@intel.com
2019-12-03drm/fb-helper: don't preserve fb_ops across deferred IO useJani Nikula1-22/+3
Deferred IO now preserves the fb_ops. v2: Remove the no-op vfree, drop a local var (Noralf) Cc: Noralf Trønnes <noralf@tronnes.org> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1eae0b23d4724d5702b886b6a061ec8219eb9284.1575022735.git.jani.nikula@intel.com
2019-11-19drm/fb-helper: Remove drm_fb_helper_unlink_fbi()Thomas Zimmermann1-15/+1
There are no callers of drm_fb_helper_unlink_fbi() left. Remove the function. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191114125106.28347-3-tzimmermann@suse.de
2019-11-13drm/fb-helper: unexport drm_fb_helper_generic_probeDaniel Vetter1-11/+3
Not sure we don't yet have this as a patch somewhere ... Motivation is that the automatic lifetime management of the generic fbdev code is quite tricky, and it'll get even more tricky. Allowing drivers to just use the fb_probe looks like a recipe for disaster. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191112175048.1581-1-daniel.vetter@ffwll.ch
2019-11-07drm/fb-helper: Remove drm_fb_helper_fbdev_{setup, teardown}()Thomas Zimmermann1-108/+1
Both functions are unused and can be removed. Drivers should use drm_fbdev_generic_setup() instead. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191106124727.11641-3-tzimmermann@suse.de
2019-10-28drm/fb-helper: Remove drm_fb_helper_defio_init() and update docsThomas Zimmermann1-48/+13
There are no users of drm_fb_helper_defio_init(), so we can remove it. The documentation around defio support is a bit misleading and should mention compatibility issues with SHMEM helpers. Clarify this. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191025092759.13069-2-tzimmermann@suse.de
2019-09-30drm/fb-helper: Include prototype for drm_fb_helper_modinit()Ville Syrjälä1-0/+1
Sparse complains: drivers/gpu/drm/drm_fb_helper.c:2409:12: warning: symbol 'drm_fb_helper_modinit' was not declared. Should it be static? Include the header with the correct prototype. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190710125143.9965-1-ville.syrjala@linux.intel.com Reviewed-by: Sean Paul <sean@poorly.run>
2019-07-09drm/fb-helper: Instanciate shadow FB if configured in device's mode_configThomas Zimmermann1-3/+15
Generic framebuffer emulation uses a shadow buffer for framebuffers with dirty() function. If drivers want to use the shadow FB without such a function, they can now set prefer_shadow or prefer_shadow_fbdev in their mode_config structures. The former flag is exported to userspace, the latter flag is fbdev-only. v3: * only schedule dirty worker if fbdev uses shadow fb * test shadow fb settings with boolean operators * use bool for struct drm_mode_config.prefer_shadow_fbdev * fix documentation comments Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/315834/
2019-07-09drm/fb-helper: Map DRM client buffer only when requiredThomas Zimmermann1-8/+25
This patch changes DRM clients to not map the buffer by default. The buffer, like any buffer object, should be mapped and unmapped when needed. An unmapped buffer object can be evicted to system memory and does not consume video ram until displayed. This allows to use generic fbdev emulation with drivers for low-memory devices, such as ast and mgag200. This change affects the generic framebuffer console. HW-based consoles map their console buffer once and keep it mapped. Userspace can mmap this buffer into its address space. The shadow-buffered framebuffer console only needs the buffer object to be mapped during updates. While not being updated from the shadow buffer, the buffer object can remain unmapped. Userspace will always mmap the shadow buffer. v2: * change DRM client to not map buffer by default * manually map client buffer for fbdev with HW framebuffer Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/315830/
2019-06-19drm/client: Change drm_client_panel_rotation nameMaxime Ripard1-1/+1
The drm_client_panel_rotation function has been used so far to set the default rotation based on the panel orientation. However, we can have more sources of information to make that decision, starting with the command line that we will introduce later in this series. Change the name to remove the panel mention. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/8cb0f0d9569d41685bbf30a1538da6578cd2769b.1560783090.git-series.maxime.ripard@bootlin.com
2019-06-12drm: Reverse lock order in pan_display_legacy()Thomas Zimmermann1-2/+2
Acquiring drm_client_dev.modeset_mutex after the locks in drm_fb_helper.dev creates a deadlock with drm_setup_crtcs() as shown below: [ 4.959319] fbcon: radeondrmfb (fb0) is primary device [ 4.993952] Console: switching to colour frame buffer device 240x67 [ 4.994040] [ 4.994041] ====================================================== [ 4.994041] WARNING: possible circular locking dependency detected [ 4.994042] 5.2.0-rc4-1-default+ #39 Tainted: G E [ 4.994043] ------------------------------------------------------ [ 4.994043] systemd-udevd/369 is trying to acquire lock: [ 4.994044] 00000000fb622acb (&client->modeset_mutex){+.+.}, at: drm_fb_helper_pan_display+0x103/0x1f0 [drm_kms_helper] [ 4.994055] [ 4.994055] but task is already holding lock: [ 4.994055] 0000000028767ae4 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x42/0xf0 [drm] [ 4.994072] [ 4.994072] which lock already depends on the new lock. [ 4.994072] [ 4.994072] [ 4.994072] the existing dependency chain (in reverse order) is: [ 4.994073] [ 4.994073] -> #3 (crtc_ww_class_mutex){+.+.}: [ 4.994076] lock_acquire+0x9e/0x170 [ 4.994079] __ww_mutex_lock.constprop.18+0x97/0xf40 [ 4.994080] ww_mutex_lock+0x30/0x90 [ 4.994091] drm_modeset_lock+0x42/0xf0 [drm] [ 4.994102] drm_modeset_lock_all_ctx+0x1f/0xe0 [drm] [ 4.994113] drm_modeset_lock_all+0x5e/0x1a0 [drm] [ 4.994163] intel_modeset_init+0x60b/0xda0 [i915] .. [ 4.994253] [ 4.994253] -> #2 (crtc_ww_class_acquire){+.+.}: [ 4.994255] lock_acquire+0x9e/0x170 [ 4.994270] drm_modeset_acquire_init+0xcc/0x100 [drm] [ 4.994280] drm_modeset_lock_all+0x44/0x1a0 [drm] [ 4.994320] intel_modeset_init+0x60b/0xda0 [i915] .. [ 4.994403] [ 4.994403] -> #1 (&dev->mode_config.mutex){+.+.}: [ 4.994405] lock_acquire+0x9e/0x170 [ 4.994408] __mutex_lock+0x62/0x8c0 [ 4.994413] drm_setup_crtcs+0x17c/0xc50 [drm_kms_helper] [ 4.994418] __drm_fb_helper_initial_config_and_unlock+0x34/0x530 [drm_kms_helper] [ 4.994450] radeon_fbdev_init+0x110/0x130 [radeon] .. [ 4.994535] [ 4.994535] -> #0 (&client->modeset_mutex){+.+.}: [ 4.994537] __lock_acquire+0xa85/0xe90 [ 4.994538] lock_acquire+0x9e/0x170 [ 4.994540] __mutex_lock+0x62/0x8c0 [ 4.994545] drm_fb_helper_pan_display+0x103/0x1f0 [drm_kms_helper] [ 4.994547] fb_pan_display+0x92/0x120 [ 4.994549] bit_update_start+0x1a/0x40 [ 4.994550] fbcon_switch+0x392/0x580 [ 4.994552] redraw_screen+0x12c/0x220 [ 4.994553] do_bind_con_driver.cold.30+0xe1/0x10d [ 4.994554] do_take_over_console+0x113/0x190 [ 4.994555] do_fbcon_takeover+0x58/0xb0 [ 4.994557] notifier_call_chain+0x47/0x70 [ 4.994558] blocking_notifier_call_chain+0x44/0x60 [ 4.994559] register_framebuffer+0x231/0x310 [ 4.994564] __drm_fb_helper_initial_config_and_unlock+0x2fd/0x530 [drm_kms_helper] [ 4.994590] radeon_fbdev_init+0x110/0x130 [radeon] .. This problem was introduced in d81294afe drm/fb-helper: Remove drm_fb_helper_crtc Reversing the lock ordering in pan_display_legacy() fixes the issue. Fixes: d81294afeecd ("drm/fb-helper: Remove drm_fb_helper_crtc") Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190611115716.7052-1-tzimmermann@suse.de
2019-06-11drm/fb-helper: Move out modeset config codeNoralf Trønnes1-692/+0
No functional changes, just moving code as-is and fixing includes. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190608152657.36613-4-noralf@tronnes.org
2019-06-11drm/fb-helper: Prepare to move out modeset config codeNoralf Trønnes1-18/+44
This prepares the modeset code so it can be moved out as-is in the next patch. v3: Remove stray newline Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190608152657.36613-3-noralf@tronnes.org
2019-06-11drm/fb-helper: Remove drm_fb_helper_connectorNoralf Trønnes1-349/+157
All drivers add all their connectors so there's no need to keep around an array of available connectors. Instead we just put the useable (not writeback) connectors in a temporary array using drm_client_for_each_connector_iter() everytime we probe the outputs. Other places where it's necessary to look at the connectors, we just iterate over them using the same iterator function. Rename functions which signature is changed since they will be moved to drm_client in a later patch. v6: Improve commit message (Sam Ravnborg) Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190608152657.36613-2-noralf@tronnes.org
2019-06-08drm/fb-helper: Move out commit codeNoralf Trønnes1-282/+0
Move the modeset commit code to drm_client_modeset. No changes except exporting API. v7: Export drm_client_panel_rotation() (Gerd Hoffmann) v2: Move to drm_client_modeset.c instead of drm_client.c Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190531140117.37751-5-noralf@tronnes.org
2019-06-08drm/fb-helper: Prepare to move out commit codeNoralf Trønnes1-41/+81
This makes the necessary changes so the commit code can be moved out to drm_client as-is in the next patch. It's split up to ease review. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190531140117.37751-4-noralf@tronnes.org
2019-06-04drm/fb-helper: Remove drm_fb_helper_crtcNoralf Trønnes1-175/+124
struct drm_fb_helper_crtc is now just a wrapper around drm_mode_set so use that directly instead and attach it as a modeset array onto drm_client_dev. drm_fb_helper will use this array to store its modesets which means it will always initialize a drm_client, but it will not register the client (callbacks) unless it's the generic fbdev emulation. Code will later be moved to drm_client, so add code there in a new file drm_client_modeset.c with MIT license to match drm_fb_helper.c. The modeset connector array size is hardcoded for the cloned case to avoid having to pass in a value from the driver. A value of 8 is chosen to err on the safe side. This means that the max connector argument for drm_fb_helper_init() and drm_fb_helper_fbdev_setup() isn't used anymore, a todo entry for this is added. In pan_display_atomic() restore_fbdev_mode_force() is used instead of restore_fbdev_mode_atomic() because that one will later become internal to drm_client_modeset. Locking order: 1. drm_fb_helper->lock 2. drm_master_internal_acquire 3. drm_client_dev->modeset_mutex v6: Improve commit message (Sam Ravnborg) v3: - Use full drm_client_init/release for the modesets (Daniel Vetter) - drm_client_for_each_modeset: use lockdep_assert_held (Daniel Vetter) - Hook up to Documentation/gpu/drm-client.rst (Daniel Vetter) v2: - Add modesets array to drm_client (Daniel Vetter) - Use a new file for the modeset code (Daniel Vetter) - File has to be MIT licensed (Emmanuel Vadot) - Add copyrights from drm_fb_helper.c Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190531140117.37751-3-noralf@tronnes.org
2019-05-27drm: drop use of drmP.h in drm/*Sam Ravnborg1-7/+12
The use of the drmP.h header file is deprecated. Remove use from all files in drm/* so people do not look there and follow a bad example. Build tested allyesconfig,allmodconfig on x86, arm etc. Including alpha that is as always more challenging than the rest. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20190526173535.32701-8-sam@ravnborg.org
2019-05-20drm: Remove users of drm_format_info_plane_cppMaxime Ripard1-1/+1
drm_format_info_plane_cpp() basically just returns the cpp array content found in the drm_format_info structure. Since it's pretty trivial, let's remove the function and have the users use the array directly Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/c0a78c87cd0410a1819edad2794ad06543c85bb5.1558002671.git-series.maxime.ripard@bootlin.com
2019-05-20drm/fourcc: Pass the format_info pointer to drm_format_plane_cppMaxime Ripard1-1/+1
So far, the drm_format_plane_cpp function was operating on the format's fourcc and was doing a lookup to retrieve the drm_format_info structure and return the cpp. However, this is inefficient since in most cases, we will have the drm_format_info pointer already available so we shouldn't have to perform a new lookup. Some drm_fourcc functions also already operate on the drm_format_info pointer for that reason, so the API is quite inconsistent there. Let's follow the latter pattern and remove the extra lookup while being a bit more consistent. In order to be extra consistent, also rename that function to drm_format_info_plane_cpp and to a static function in the header to match the current policy. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/32aa13e53dbc98a90207fd290aa8e79f785fb11e.1558002671.git-series.maxime.ripard@bootlin.com
2019-05-16drm/fb-helper: Fix drm_fb_helper_hotplug_event() NULL ptr argumentNoralf Trønnes1-3/+2
drm_fb_helper_hotplug_event() should tolerate the fb_helper argument being NULL. Commit 03a9606e7fee ("drm/fb-helper: Avoid race with DRM userspace") introduced a fb_helper dereference before the NULL check. Fixup by moving the dereference after the NULL check. Fixes: 03a9606e7fee ("drm/fb-helper: Avoid race with DRM userspace") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190515132925.48867-1-noralf@tronnes.org
2019-05-14drm/fb-helper: Remove drm_fb_helper_crtc->{x, y, desired_mode}Noralf Trønnes1-8/+4
The values are already present in the modeset. This is done in preparation for the removal of struct drm_fb_helper_crtc. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190506180139.6913-5-noralf@tronnes.org
2019-05-14drm/fb-helper: No need to cache rotation and sw_rotationsNoralf Trønnes1-66/+65
Getting rotation info is cheap so we can do it on demand. This is done in preparation for the removal of struct drm_fb_helper_crtc. Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190506180139.6913-4-noralf@tronnes.org
2019-05-14drm/fb-helper: Avoid race with DRM userspaceNoralf Trønnes1-46/+56
drm_fb_helper_is_bound() is used to check if DRM userspace is in control. This is done by looking at the fb on the primary plane. By the time fb-helper gets around to committing, it's possible that the facts have changed. Avoid this race by holding the drm_device->master_mutex lock while committing. When DRM userspace does its first open, it will now wait until fb-helper is done. The helper will stay away if there's a master. Two igt tests fail with the new 'bail out if master' rule. Work around this by relaxing this rule for drm_fb_helper_restore_fbdev_mode_unlocked() until the tests have been fixed. Add todo entry for this. Locking rule: Always take the fb-helper lock first. v5: drm_fb_helper_restore_fbdev_mode_unlocked(): Use restore_fbdev_mode_force() v2: - Remove drm_fb_helper_is_bound() (Daniel Vetter) - No need to check fb_helper->dev->master in drm_fb_helper_single_fb_probe(), restore_fbdev_mode() has the check. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190506180139.6913-3-noralf@tronnes.org
2019-04-24drm/fb-helper: Fix drm_fb_helper_firmware_config() NULL pointer derefNoralf Trønnes1-0/+3
Non-atomic drivers like ast doesn't have connector->state set resulting in a NULL pointer deref: [ 29.609593] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 29.609619] Call Trace: [ 29.609630] ? drm_helper_probe_single_connector_modes+0x27f/0x680 [ 29.609640] drm_setup_crtcs+0x431/0xd80 [drm_kms_helper] [ 29.753065] __drm_fb_helper_initial_config_and_unlock+0x6f/0x6a0 [ 29.753160] ? drm_modeset_unlock_all+0x31/0x50 [drm] [ 29.765758] ast_fbdev_init+0xa8/0xc0 [ast] [ 29.765762] ast_driver_load.cold.7+0x2b3/0xe11 [ast] [ 29.765775] drm_dev_register+0x111/0x150 [drm] Fix by bailing out if the driver does not support atomic modesetting. Fixes: 09ded8af57bc ("drm/i915/fbdev: Move intel_fb_initial_config() to fbdev helper") Reported-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20190423145353.30158-1-noralf@tronnes.org
2019-04-24drm/fb: revert the i915 Actually configure untiled displays from masterDave Airlie1-7/+5
This code moved in here in master, so revert it the same way. This is the same revert as 9fa246256e09 ("Revert "drm/i915/fbdev: Actually configure untiled displays"") in drm-fixes. Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-04-24Merge tag 'drm-misc-next-2019-04-18' of ↵Dave Airlie1-5/+191
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.2: UAPI Changes: - Document which feature flags belong to which command in virtio_gpu.h - Make the FB_DAMAGE_CLIPS available for atomic userspace only, it's useless for legacy. Cross-subsystem Changes: - Add device tree bindings for lg,acx467akm-7 panel and ST-Ericsson Multi Channel Display Engine MCDE - Add parameters to the device tree bindings for tfp410 - iommu/io-pgtable: Add ARM Mali midgard MMU page table format - dma-buf: Only do a 64-bits seqno compare when driver explicitly asks for it, else wraparound. - Use the 64-bits compare for dma-fence-chains Core Changes: - Make the fb conversion functions use __iomem dst. - Rename drm_client_add to drm_client_register - Move intel_fb_initial_config to core. - Add a drm_gem_objects_lookup helper - Add drm_gem_fence_array helpers, and use it in lima. - Add drm_format_helper.c to kerneldoc. Driver Changes: - Add panfrost driver for mali midgard/bitfrost. - Converts bochs to use the simple display type. - Small fixes to sun4i, tinydrm, ti-fp410. - Fid aspeed's Kconfig options. - Make some symbols/functions static in lima, sun4i and meson. - Add a driver for the lg,acx467akm-7 panel. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/737ad994-213d-45b5-207a-b99d795acd21@linux.intel.com
2019-04-15BackMerge v5.1-rc5 into drm-nextDave Airlie1-1/+1
Need rc5 for udl fix to add udl cleanups on top. Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-04-11drm/i915/fbdev: Move intel_fb_initial_config() to fbdev helperNoralf Trønnes1-4/+190
It is generic code and having it in the helper will let other drivers benefit from it. One change was necessary assuming this to be true: INTEL_INFO(dev_priv)->num_pipes == dev->mode_config.num_crtc Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190407165243.54043-4-noralf@tronnes.org
2019-04-11drm/client: Rename drm_client_add() to drm_client_register()Noralf Trønnes1-1/+1
This is done to stay consistent with our naming scheme of _register() = others can start calling us from any thread. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190403125658.32389-1-noralf@tronnes.org
2019-04-03drm/fb-helper: generic: Call drm_client_add() after setup is doneNoralf Trønnes1-2/+2
Hotplug can happen while drm_fbdev_generic_setup() is running so move drm_client_add() call after setup is done to avoid drm_fbdev_client_hotplug() running in two threads at the same time. Fixes: 9060d7f49376 ("drm/fb-helper: Finish the generic fbdev emulation") Cc: stable@vger.kernel.org Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190401141358.25309-1-noralf@tronnes.org
2019-04-03drm/fb-helper: dpms_legacy(): Only set on connectors in useNoralf Trønnes1-6/+5
For each enabled crtc the functions sets dpms on all registered connectors. Limit this to only doing it once and on the connectors actually in use. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Fixes: 023eb571a1d0 ("drm: correctly update connector DPMS status in drm_fb_helper") Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190326175546.18126-3-noralf@tronnes.org
2019-04-03drm/fb-helper: Remove unused gamma_size variableNoralf Trønnes1-5/+1
The gamma_size variable has not been used since commit 4abe35204af8 ("drm/kms/fb: use slow work mechanism for normal hotplug also.") While in the area move a comment back to its code block. They got separated by commit d50ba256b5f1 ("drm/kms: start adding command line interface using fb."). Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190326175546.18126-2-noralf@tronnes.org
2019-03-27drm/fb-helper: Fixup fill_info cleanupDaniel Vetter1-3/+2
I forgot the !CONFIG_FBDEV case. Also some kerneldoc needed more adjusting. Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Alex Deucher <alexander.deucher@amd.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190327125819.16478-1-daniel.vetter@ffwll.ch
2019-03-27drm/fb-helper: Unexport fill_{var,info}Daniel Vetter1-33/+5
Not used by drivers anymore. v2: Rebase Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-21-daniel.vetter@ffwll.ch
2019-03-27drm/fb_helper: set info->par in fill_info()Daniel Vetter1-1/+1
The fbdev emulation helpers pretty much assume that this is set. Let's do it for everyone. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-3-daniel.vetter@ffwll.ch
2019-03-27drm/fb-helper: set fbi->fix.id in fill_info()Daniel Vetter1-2/+3
Looking at the oldest/most popular drivers ${driver}drmfb seems to be the standard, except i915.ko went with "inteldrmfb". I guess renaming that for consistency won't hurt, it definitely confused me when I started with kms 10 years ago. I hope this never became uapi ... worst case drivers can overwrite it after having called fill_info(). Since subsequent patches change this for some drivers later on in the series, here's the exhaustive list of where all fix.id is used: - /proc/fb which prints the minor number and fix.id name. - per-fb sysfs name file - getfix ioctl, which is used by fbset only to print out the name when dumping information - lots and lots of places in dmesg, anytime anything happens with an fbdev really I think minimal to 0 chances that changing this will screw up a config script or something, since outside of informational message it's not used by anything to identify which fbdev maps to which minor. After all the last fbset release is from 1999, and that predates even devfs I think. v2: Rebase and amend commit message, thanks to Ilia for pointing out that this needs to be spelled out. Cc: Ilia Mirkin <imirkin@alum.mit.edu> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-2-daniel.vetter@ffwll.ch
2019-03-27drm/fb-helper: Add fill_info() functionsDaniel Vetter1-2/+27
The fbdev split between fix and var information is kinda pointless for drm drivers since everything is fixed: The fbdev emulation doesn't support changing modes at all. Create a new simplified helper and use it in the generic fbdev helper code. Follow-up patches will beef it up more and roll it out to all drivers. v2: We need to keep sizes, since they might not match the fb dimensions (Noralf) v3: Fix typo in commit message and remove extraneous line in kerneldoc (Noralf) Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-1-daniel.vetter@ffwll.ch
2019-03-26drm/fbdev: Make skip_vt_switch the defaultDaniel Vetter1-0/+1
KMS drivers really should all be able to restore their display state on resume without fbcon helping out. So make this the default. Since I'm not entirely foolish, make it only a default, which drivers can still override. That way when the inevitable regression report happens I can fix things up with a one-liner plus FIXME comment that someone should fix up the suspend/resume code in that driver. But at least all new drivers won't be broken by accident as soon as you turn off fbcon because "suspend/resume worked when I tested it". v2: Keep this for radeon because of commit 18c437caa5b18a235dd65cec224eab54bebcee65 Author: Alex Deucher <alexander.deucher@amd.com> Date: Tue Nov 14 17:19:29 2017 -0500 Revert "drm/radeon: dont switch vt on suspend" Thanks to Michel Dänzer for pointing this one out. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Michel Dänzer <michel@daenzer.net> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Samuel Li <Samuel.Li@amd.com> Cc: "Michel Dänzer" <michel.daenzer@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Junwei Zhang <Jerry.Zhang@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Shirish S <shirish.s@amd.com> Cc: Daniel Stone <daniels@collabora.com> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Samuel Li <samuel.li@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181127173424.301-1-daniel.vetter@ffwll.ch
2019-03-25drm/fb: avoid setting 0 depth.Dave Airlie1-1/+1
If the downscaling fails and we end up with a best_depth of 0, then ignore it. This actually works around a cascade of failure, but it the simplest fix for now. The scaling patch broke the udl driver, as the udl driver doesn't expose planes at all, so gets the two default 32-bit formats, but the udl driver then ask for 16bpp fbdev, and the scaling code falls over. This fixes the udl driver since the scaled depth support was added. Fixes: f4bd542bcaee ("drm/fb-helper: Scale back depth to supported maximum") Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190315014621.21816-2-airlied@gmail.com
2019-02-21drm/fb-helper: generic: Don't take module ref for fbconNoralf Trønnes1-2/+4
It's now safe to let fbcon unbind automatically on fbdev unregister. The crash problem was fixed in commit 2122b40580dd ("fbdev: fbcon: Fix unregister crash when more than one framebuffer") Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190210131039.52664-13-noralf@tronnes.org
2019-02-18Merge v5.0-rc7 into drm-nextDave Airlie1-54/+79
Backmerging for nouveau and imx that needed some fixes for next pulls. Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-02-04drm: Trivial comment grammar cleanupsMatt Roper1-1/+1
Most of these are just cases where code comments used contractions (it's, who's) where they actually mean to use a possessive pronoun (its, whose) or vice-versa. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190202012326.20096-1-matthew.d.roper@intel.com
2019-01-29drm/fb-helper: generic: Fix drm_fbdev_client_restore()Noralf Trønnes1-3/+1
If fbdev setup has failed, lastclose will give a NULL pointer deref: [ 77.794295] [drm:drm_lastclose] [ 77.794414] [drm:drm_lastclose] driver lastclose completed [ 77.794660] Unable to handle kernel NULL pointer dereference at virtual address 00000014 [ 77.809460] pgd = b376b71b [ 77.818275] [00000014] *pgd=175ba831, *pte=00000000, *ppte=00000000 [ 77.830813] Internal error: Oops: 17 [#1] ARM [ 77.840963] Modules linked in: mi0283qt mipi_dbi tinydrm raspberrypi_hwmon gpio_backlight backlight snd_bcm2835(C) bcm2835_rng rng_core [ 77.865203] CPU: 0 PID: 527 Comm: lt-modetest Tainted: G C 5.0.0-rc1+ #1 [ 77.879525] Hardware name: BCM2835 [ 77.889185] PC is at restore_fbdev_mode+0x20/0x164 [ 77.900261] LR is at drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0x9c [ 78.002446] Process lt-modetest (pid: 527, stack limit = 0x7a3d5c14) [ 78.291030] Backtrace: [ 78.300815] [<c04f2d0c>] (restore_fbdev_mode) from [<c04f4708>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0x9c) [ 78.319095] r9:d8a8a288 r8:d891acf0 r7:d7697910 r6:00000000 r5:d891ac00 r4:d891ac00 [ 78.334432] [<c04f46b4>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c04f47e8>] (drm_fbdev_client_restore+0x18/0x20) [ 78.353296] r8:d76978c0 r7:d7697910 r6:d7697950 r5:d7697800 r4:d891ac00 r3:c04f47d0 [ 78.368689] [<c04f47d0>] (drm_fbdev_client_restore) from [<c051b6b4>] (drm_client_dev_restore+0x7c/0xc0) [ 78.385982] [<c051b638>] (drm_client_dev_restore) from [<c04f8fd0>] (drm_lastclose+0xc4/0xd4) [ 78.402332] r8:d76978c0 r7:d7471080 r6:c0e0c088 r5:d8a85e00 r4:d7697800 [ 78.416688] [<c04f8f0c>] (drm_lastclose) from [<c04f9088>] (drm_release+0xa8/0x10c) [ 78.431929] r5:d8a85e00 r4:d7697800 [ 78.442989] [<c04f8fe0>] (drm_release) from [<c02640c4>] (__fput+0x104/0x1c8) [ 78.457740] r8:d5ccea10 r7:d96cfb10 r6:00000008 r5:d74c1b90 r4:d8a8a280 [ 78.472043] [<c0263fc0>] (__fput) from [<c02641ec>] (____fput+0x18/0x1c) [ 78.486363] r10:00000006 r9:d7722000 r8:c01011c4 r7:00000000 r6:c0ebac6c r5:d892a340 [ 78.501869] r4:d8a8a280 [ 78.512002] [<c02641d4>] (____fput) from [<c013ef1c>] (task_work_run+0x98/0xac) [ 78.527186] [<c013ee84>] (task_work_run) from [<c010cc54>] (do_work_pending+0x4f8/0x570) [ 78.543238] r7:d7722030 r6:00000004 r5:d7723fb0 r4:00000000 [ 78.556825] [<c010c75c>] (do_work_pending) from [<c0101034>] (slow_work_pending+0xc/0x20) [ 78.674256] ---[ end trace 70d3a60cf739be3b ]--- Fix by using drm_fb_helper_lastclose() which checks if fbdev is in use. Fixes: 9060d7f49376 ("drm/fb-helper: Finish the generic fbdev emulation") Cc: stable@vger.kernel.org Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190125150300.33268-1-noralf@tronnes.org
2019-01-17drm/cma-helper: Remove unused fbdev codeNoralf Trønnes1-10/+2
CMA helper drivers have been converted to drm_fbdev_generic_setup() so the fbdev code can be removed. v3: Remove CMA specific conditional in the generic fbdev client v2: Clean up the includes some more (Laurent) Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190114121059.20704-1-noralf@tronnes.org
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-01 00:45:17 +0300