summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)AuthorFilesLines
2021-02-23drm/amd/display: Don't optimize bandwidth before disabling planesAric Cyr1-1/+2
[Why] There is a window of time where we optimize bandwidth due to no streams enabled will enable PSTATE changing but HUBPs are not disabled yet. This results in underflow counter increasing in some hotplug scenarios. [How] Set the optimize-bandwidth flag for later processing once all the HUBPs are properly disabled. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-23drm/amd/display: Synchronize displays with different timingsVladimir Stempen18-15/+505
[why] Vendor based fan noise improvement [how] Report timing synchronizable when DP streams time frame difference is less than 0.05 percent. Adjust DP DTOs and sync displays using MASTER_UPDATE_LOCK_DB_X_Y Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-23drm/amd/display: move trace buffer to uncached memory.Yongqiang Sun3-0/+21
[Why & How] Move dmub trace buffer to uncached memory. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-23drm/amd/display: Check for DSC support instead of ASIC revisionEryk Brol1-1/+1
[why] This check for ASIC revision is no longer useful and causes lightup issues after a topology change in MST DSC scenario. In this case, DSC configs should be recalculated for the new topology. This check prevented that from happening on certain ASICs that do, in fact, support DSC. [how] Change the ASIC revision to instead check if DSC is supported. Signed-off-by: Eryk Brol <eryk.brol@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-23drm/amd/display: enable audio on DP seamless bootAnthony Wang1-0/+10
[Why] Some external displays with DP can use seamless boot, but their audio endpoints are only enabled after hotplug. On boot, these displays inherit UEFI timings without properly initializing audio. [How] Enable display audio when seamless booting with an external monitor over DP. Signed-off-by: Anthony Wang <anthony1.wang@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-23drm/amd/display: disable seamless boot for DP MSTAnthony Wang1-2/+3
[Why] Seamless boot over DP MST is not POR, but is not explicitly disabled. [How] Add check for DP MST and return false in dc_validate_seamless_boot_timing. Signed-off-by: Anthony Wang <anthony1.wang@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-23drm/amd/display: Refactor debugfs entries for all connectorsStylon Wang1-8/+14
[Why] Debugfs entries being moved from DP/eDP only to be available on all connectors are cluttering the code. [How] Refactor the registration of these debugfs entries. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-23drm/amd/display: Remove Assert from dcn10_get_dig_frontendEric Bernstein2-1/+2
[Why] In some cases, this function is called when DIG BE is not connected to DIG FE, in which case a value of zero isn't invalid and assert should not be hit. [How] Remove assert and handle ENGINE_ID_UNKNOWN result in calling function. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-23drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1Rodrigo Siqueira1-0/+22
When run igt@kms_vrr in a device that uses DCN2.1 architecture, we noticed multiple failures. Furthermore, when we tested a VRR demo, we noticed a system hang where the mouse pointer still works, but the entire system freezes; in this case, we don't see any dmesg warning or failure messages kernel. This happens due to a lack of vupdate_no_lock interrupt, making the userspace wait eternally to get the event back. For fixing this issue, we need to add the vupdate_no_lock interrupt in the interrupt list. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-23drm/amdgpu: remove unused variable from struct amdgpu_boNirmoy Das1-1/+0
Fixes: 62914a99dee5a ("drm/amdgpu: Use mmu_interval_insert instead of hmm_mirror") Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-23drm/amdkfd: Cleanup kfd_process if init_cwsr_apu failsFelix Kuehling1-4/+10
If init_cwsr_apu fails, we currently leave the kfd_process structure in place anyway. The next kfd_open will then succeed, using the existing kfd_process structure. Fix that by cleaning up the kfd_process after a failure in init_cwsr_apu. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <philip.yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-23drm/amdkfd: Use mmu_notifier_getFelix Kuehling1-6/+27
We use mmu_notifier_put to free the MMU notifier. That needs to be paired with mmu_notifier_get to work correctly. Othewrise the next patch would cause a kernel oops. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <philip.yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-23Revert "drm/amd/display: reuse current context instead of recreating one"Anson Jacob3-30/+23
This reverts commit 8866a67ab86cc0812e65c04f1ef02bcc41e24d68. Reason for revert: This breaks hotplug of HDMI on some systems, resulting in a blank screen. Caused general hangs on boot/hotplugs. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1487 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1492 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211649 Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-22Merge tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds266-3105/+10139
Pull drm updates from Dave Airlie: "A pretty normal tree, lots of refactoring across the board, ttm, i915, nouveau, and bunch of features in various drivers. docs: - lots of updated docs core: - require crtc to have unique primary plane - fourcc macro fix - PCI bar quirk for bar resizing - don't sent hotplug on error - move vm code to legacy - nuke hose only used on old oboslete alpha dma-buf: - kernel doc updates - improved lock tracking dp/hdmi: - DP-HDMI2.1 protocol converter support ttm: - bo size handling cleanup - release a pinned bo warning - cleanup lru handler - avoid using pages with drm_prime_sg_to_page_addr_arrays cma-helper: - prime/mmap fixes bridge: - add DP support gma500: - remove gma3600 support i915: - try eDP fast/narrow link again with fallback - Intel eDP backlight control - replace display register read/write macros - refactor intel_display.c - display power improvements - HPD code cleanup - Rocketlake display fixes - Power/backlight/RPM fixes - DG1 display fix - IVB/BYT clear residuals security fix again - make i915 mitigations options via parameter - HSW GT1 GPU hangs fixes - DG1 workaround hang fixes - TGL DMAR hang avoidance - Lots of GT fixes - follow on fixes for residuals clear - gen7 per-engine-reset support - HDCP2.2 + HDCP1.4 GEN12 DP MST support - TGL clear color support - backlight refactoring - VRR/Adaptive sync enabling on DP/EDP for TGL+ - async flips for all ilk+ amdgpu: - rework IH ring handling (Vega/Navi) - rework HDP handling (Vega/Navi) - swSMU updates for renoir/vangogh - Sienna Cichild overdrive support - FP16 on DCE8-11 support - GPU reset on navy flounder/vangogh - SMU profile fixes for APU - SR-IOV fixes - Vangogh SMU fixes - fan speed control fixes amdkfd: - config handling fix - buffer free fix - recursive lock warnings fix nouveau: - Turing MMU fault recovery fixes - mDP connectors reporting fix - audio locking fixes - rework engines/instances code to support new scheme tegra: - VIC newer firmware support - display/gr2d fixes for older tegra - pm reference leak fix mediatek: - SOC MT8183 support - decouple sub driver + share mtk mutex driver radeon: - PCI resource fix for some platforms ingenic: - pm support - 8-bit delta RGB panels vmwgfx: - managed driver helpers vc4: - BCM2711 DSI1 support - converted to atomic helpers - enable 10/12 bpc outputs - gem prime mmap helpers - CEC fix omap: - use degamma table - CTM support - rework DSI support imx: - stack usage fixes - drm managed support - imx-tve clock provider leak fix - rcar-du: - default mode fixes - conversion to managed API hisilicon: - use simple encoder vkms: - writeback connector support d3: - BT2020 support" * tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drm: (1459 commits) drm/amdgpu: Set reference clock to 100Mhz on Renoir (v2) drm/radeon: OLAND boards don't have VCE drm/amdkfd: Fix recursive lock warnings drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth() drm/amd/display: Fix potential integer overflow drm/amdgpu/display: remove hdcp_srm sysfs on device removal drm/amdgpu: fix CGTS_TCC_DISABLE register offset on gfx10.3 drm/i915/gt: Correct surface base address for renderclear drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling drm/nouveau/top/ga100: initial support drm/nouveau/top: add ioctrl/nvjpg drm/nouveau/privring: rename from ibus drm/nouveau/nvkm: remove nvkm_subdev.index drm/nouveau/nvkm: determine subdev id/order from layout drm/nouveau/vic: switch to instanced constructor drm/nouveau/sw: switch to instanced constructor drm/nouveau/sec2: switch to instanced constructor drm/nouveau/sec: switch to instanced constructor drm/nouveau/pm: switch to instanced constructor drm/nouveau/nvenc: switch to instanced constructor ...
2021-02-21Merge tag 'acpi-5.12-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20210105, fix and clean up the handling of device properties, add support for setting global profile of the platform, clean up device enumeration, the CPPC library, the APEI support and more, update the documentation, consolidate the printing of messages in several places and make assorted janitorial changes. Specifics: - Update ACPICA code in the kernel to upstream revision 20201113 with changes as follows: * Remove the MTMR (Mid-Timer) table (Al Stone). * Remove the VRTC table (Al Stone). * Add type casts for string functions (Bob Moore). * Update all copyrights to 2021 (Bob Moore). * Fix exception code class checks (Maximilian Luz). * Clean up exception code class checks (Maximilian Luz). * Fix -Wfallthrough (Nick Desaulniers). - Add support for setting and reading global profile of the platform along with documentation (Mark Pearson, Hans de Goede, Jiaxun Yang). - Fix fwnode properties matching and clean up the code handling device properties and its documentation (Rafael Wysocki, Andy Shevchenko). - Clean up ACPI-based device enumeration code (Rafael Wysocki). - Clean up the CPPC support library code (Ionela Voinescu). - Clean up the APEI support code (Yang Li, Yazen Ghannam). - Update GPIO-related properties documentation (Flavio Suligoi). - Consolidate and clean up the printing of messages in several places (Rafael Wysocki). - Fix error code path in configfs handling code (Qinglang Miao). - Use DEVICE_ATTR_<RW|RO|WO> macros where applicable (Dwaipayan Ray). - Replace tests for !ACPI_FAILURE with tests for ACPI_SUCCESS in multiple places (Bjorn Helgaas)" * tag 'acpi-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits) ACPI: property: Satisfy kernel doc validator (part 2) ACPI: property: Satisfy kernel doc validator (part 1) ACPI: property: Make acpi_node_prop_read() static ACPI: property: Remove dead code ACPI: property: Fix fwnode string properties matching ACPI: OSL: Clean up printing messages ACPI: OSL: Rework acpi_check_resource_conflict() ACPI: APEI: ERST: remove unneeded semicolon ACPI: thermal: Clean up printing messages ACPI: video: Clean up printing messages ACPI: button: Clean up printing messages ACPI: battery: Clean up printing messages ACPI: AC: Clean up printing messages ACPI: bus: Drop ACPI_BUS_COMPONENT which is not used any more ACPI: utils: Clean up printing messages ACPI: scan: Clean up printing messages ACPI: bus: Clean up printing messages ACPI: PM: Clean up printing messages ACPI: power: Clean up printing messages ACPI: APEI: Add is_generic_error() to identify GHES sources ...
2021-02-19drm/amd/display: Simplify bool conversionYang Li1-2/+1
Fix the following coccicheck warning: ./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:8142:16-21: WARNING: conversion to bool not needed here Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amd/pm: do not issue message while write "r" into pp_od_clk_voltageHuang Rui3-70/+0
We should commit the value after restore them back to default as well. $ echo "r" > pp_od_clk_voltage $ echo "c" > pp_od_clk_voltage Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amd/display: Old sequence for HUBP blankAurabindo Pillai11-97/+30
New proposed sequence for HUBP blanking causes regressions where the hardware would fail to enter blank which triggers an assert in the new sequence. This change brings back the old sequence. Fixes: 985faf2c4ecb60 ("drm/amd/display: New sequence for HUBP blank") Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amdgpu: mark local function as staticNirmoy Das1-1/+1
Mark amdgpu_ras_debugfs_create_ctrl_node() as static. Fixes: eb14235668777b ("drm/amdgpu: do not keep debugfs dentry") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amd/display: 3.2.123Aric Cyr1-1/+1
DC version 3.2.123 brings improvements in multiple areas. In summary, we highlight: - Firmware release 0.0.52 - Bug fixes on MPC OGAM sequence, display experience, etc. - Improvements on timing, transmitter control, etc. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amd/display: [FW Promotion] Release 0.0.52Anthony Koo1-3/+5
[How] Add new aux cmd fields for acquire and release Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amd/display: Implement transmitter control v1.7Eric Bernstein1-1/+71
[Why] Moving definition of transmitter control from atomfirmware to internal header. [How] Update the command table code to call 1.7 and make it the default fallback path. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amd/display: AVMUTE simplificationChris Park1-1/+1
[Why] Simplify AVMUTE logic in coding [How] Avoid multiple calls on TMDS AVMUTE as updated logic now demands it. Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amd/display: Copy over soc values before bounding box creationSung Lee1-0/+5
[Why] With certain fclock overclocks, state 1 may be chosen as the closest clock level. This may result in this state being empty if not populated beforehand, resulting in black screens and screen corruption. [How] Copy over all soc states to clock_limits before bounding box creation to avoid any cases with empty states. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amd/display: Add Freesync HDMI support to DMStylon Wang2-39/+144
[Why] Add necessary support for Freesync HDMI in Linux DM [How] - Support Freesync HDMI by calling DC interace - Report Freesync capability to vrr_range debugfs from DRM - Depends on coming DMCU/DMUB firmware to enable feature Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amd/display: Populate dcn2.1 bounding box before state duplicationSung Lee1-2/+2
[Why] If system is overclocked, only 1 bounding box state will be sent by SMU. This results in an empty state being copied for DML calculations causing black screens and corruption. [How] Fully populate bounding box before duplicating last state. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amd/display: Fix MPC OGAM power on/off sequenceNicholas Kazlauskas1-11/+13
[Why] Color corruption can occur on bootup into a login manager that applies a non-linear gamma LUT because the LUT may not actually be powered on before writing. It's cleared on the next full pipe reprogramming as we switch to LUTB from LUTA and the pipe accessing the LUT has taken it out of light sleep mode. [How] The MPCC_OGAM_MEM_PWR_FORCE register does not force the current power mode when set to 0. It only forces when set light sleep, deep sleep or shutdown. The register to actually force power on and ignore sleep modes is MPCC_OGAM_MEM_PWR_DIS - a value of 0 will enable power requests and a value of 1 will disable them. When PWR_FORCE!=0 is combined with PWR_DIS=0 then MPCC OGAM memory is forced into the state specified by the force bits. If PWR_FORCE is 0 then it respects the mode specified by MPCC_OGAM_MEM_LOW_PWR_MODE if the RAM LUT is not in use. We set that bit to shutdown on low power, but otherwise it inherits from bootup defaults. So for the fix: 1. Update the sequence to "force" power on when needed We can use MPCC_OGAM_MEM_PWR_DIS for this to turn on the memory even when the block is in bypass and pending to be enabled for the next frame. We need this for both low power enabled or disabled. If we don't set this then we can run into issues when we first program the LUT from bootup. 2. Don't apply FORCE_SEL Once we enable power requests with DIS=0 we run into the issue of the RAM being forced into light sleep and being unusable for display output. Leave this 0 like we used to for DCN20. 3. Rely on MPCC OGAM init to determine light sleep/deep sleep MPC low power debug mode isn't enabled on any ASIC currently but we'll respect the setting determined during init if it is. Lightly tested as working with IGT tests and desktop color adjustment. 4. Change the MPC resource default for DCN30 It was interleaving the dcn20 and dcn30 versions before depending on the sequence. 5. REG_WAIT for it to be on whenever we're powering up the memory Otherwise we can write register values too early and we'll get corruption. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amd/display: Add dc_dmub_srv helpers for in/out DMCUB commandsNicholas Kazlauskas2-0/+24
[Why] We added these in DMCUB for runtime feature detection but we didn't have helpers to call these with DC error handling/logging. [How] Add helpers. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amd/display: changing sr exit latencyMartin Leung1-1/+1
[Why] Hardware team remeasured, need to update timings to increase latency slightly and avoid intermittent underflows. [How] sr exit latency update. Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19Revert "drm/amd/display: Unblank hubp based on plane visibility"Wesley Chalmers3-17/+9
This reverts commit fd1c85d3ac2ccfec33b007399e6677b41899a888 [Why] We are not implementing the planned new HW sequence to disable HUBP. [How] Revert most related changes to minimize possibility of regression. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19Revert "drm/amd/display: New path for enabling DPG"Wesley Chalmers2-22/+0
This reverts commit f8e792dc5c45d306a542b9ee991ae80e1c78e4c5 [Why] We are not implementing the planned new HW sequence for HUBP disable. [How] Revert most related changes to minimize regressions. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amd/display: remove global optimize seamless boot stream countLewis Huang2-14/+19
[Why] In following sequence driver will add counter twice on same edp stream. 1. Boot into OS. 2. Set timing with edp only. 3. Set timing with edp and external monitor. 4. Set visibility on for edp. Step 2 and 3 will add seamless boot counter twice and subtract it once in step 4. [How] Remove global counter and calculate it is used. Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amd/display: Change ABM sample ratePo-Ting Chen1-5/+5
[Why] To get the pixel statistics on every frame, change ABM sample rate from 2 to 1. [How] Change LS, HS and BL sample rate to 1. Signed-off-by: Po-Ting Chen <robin.chen@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amdgpu: Set reference clock to 100Mhz on Renoir (v2)Alex Deucher1-0/+2
Fixes the rlc reference clock used for GPU timestamps. Value is 100Mhz. Confirmed with hardware team. v2: reword commit message. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1480 Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-02-19drm/amdkfd: Fix recursive lock warningsFelix Kuehling1-2/+2
memalloc_nofs_save/restore are no longer sufficient to prevent recursive lock warnings when holding locks that can be taken in MMU notifiers. Use memalloc_noreclaim_save/restore instead. Fixes: f920e413ff9c ("mm: track mmu notifiers in fs_reclaim_acquire/release") CC: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.10.x
2021-02-19drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth()Jan Kokemüller2-3/+19
dcn21_validate_bandwidth() calls functions that use floating point math. On my machine this sometimes results in simd exceptions when there are other FPU users such as KVM virtual machines running. The screen freezes completely in this case. Wrapping the function with DC_FP_START()/DC_FP_END() seems to solve the problem. This mirrors the approach used for dcn20_validate_bandwidth. Tested on a AMD Ryzen 7 PRO 4750U (Renoir). Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206987 Signed-off-by: Jan Kokemüller <jan.kokemueller@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-02-19drm/amd/pm: Replace one-element array with flexible-array in struct ↵Gustavo A. R. Silva1-3/+3
_ATOM_Vega10_GFXCLK_Dependency_Table There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Use flexible-array member in struct _ATOM_Vega10_GFXCLK_Dependency_Table, instead of one-element array. Also, this helps with the ongoing efforts to enable -Warray-bounds and fix the following warning: drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_hwmgr.c: In function ‘vega10_get_pp_table_entry_callback_func’: drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_hwmgr.c:3113:30: warning: array subscript 4 is above array bounds of ‘ATOM_Vega10_GFXCLK_Dependency_Record[1]’ {aka ‘struct _ATOM_Vega10_GFXCLK_Dependency_Record[1]’} [-Warray-bounds] 3113 | gfxclk_dep_table->entries[4].ulClk; | ~~~~~~~~~~~~~~~~~~~~~~~~~^~~ [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Build-tested-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/6023ff3d.WY3sSCkGRQPdPlVo%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amd/display: Fix potential integer overflowGustavo A. R. Silva1-1/+1
Fix potential integer overflow by casting actual_calculated_clock_100hz to u64, in order to give the compiler complete information about the proper arithmetic to use. Notice that such variable is used in a context that expects an expression of type u64 (64 bits, unsigned) and the following expression is currently being evaluated using 32-bit arithmetic: actual_calculated_clock_100hz * post_divider Fixes: 7a03fdf628af ("drm/amd/display: fix 64bit division issue on 32bit OS") Addresses-Coverity-ID: 1501691 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amd/pm: Replace one-element array with flexible-array in struct ↵Gustavo A. R. Silva2-9/+7
SISLANDS_SMC_SWSTATE There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Refactor the code according to the use of a flexible-array member in struct SISLANDS_SMC_SWSTATE, instead of a one-element array, and use the struct_size() helper to calculate the size for the allocation. Also, this helps with the ongoing efforts to enable -Warray-bounds and fix the following warnings: drivers/gpu/drm/amd/amdgpu/../pm/powerplay/si_dpm.c:2448:20: warning: array subscript 1 is above array bounds of ‘SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’ {aka ‘struct SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’} [-Warray-bounds] drivers/gpu/drm/amd/amdgpu/../pm/powerplay/si_dpm.c:2449:20: warning: array subscript 1 is above array bounds of ‘SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’ {aka ‘struct SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’} [-Warray-bounds] drivers/gpu/drm/amd/amdgpu/../pm/powerplay/si_dpm.c:2450:20: warning: array subscript 1 is above array bounds of ‘SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’ {aka ‘struct SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’} [-Warray-bounds] drivers/gpu/drm/amd/amdgpu/../pm/powerplay/si_dpm.c:2451:20: warning: array subscript 1 is above array bounds of ‘SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’ {aka ‘struct SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’} [-Warray-bounds] drivers/gpu/drm/amd/amdgpu/../pm/powerplay/si_dpm.c:2452:20: warning: array subscript 1 is above array bounds of ‘SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’ {aka ‘struct SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’} [-Warray-bounds] drivers/gpu/drm/amd/amdgpu/../pm/powerplay/si_dpm.c:5570:20: warning: array subscript 1 is above array bounds of ‘SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’ {aka ‘struct SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’} [-Warray-bounds] [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Build-tested-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/6023be58.sk66L%2FV4vuSJI5mI%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amd/pm: fix spelling mistake in various messages ↵Colin Ian King3-3/+3
"power_dpm_force_perfomance_level" There are spelling mistakes in error and warning messages, the text power_dpm_force_perfomance_level is missing a letter r and should be power_dpm_force_performance_level. Fix them. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amdgpu: do not use drm middle layer for debugfsNirmoy Das10-215/+177
Use debugfs API directly instead of drm middle layer. This also includes following debugfs file output changes: 1 amdgpu_evict_vram/amdgpu_evict_gtt output will not contain any braces. e.g. (0) --> 0 2 amdgpu_gpu_recover output will print return value of amdgpu_device_gpu_recover() instead of not so important "gpu recover" message. v2: * checkpatch.pl: use '0444' instead of S_IRUGO. * remove S_IFREG from mode. * remove mode variable. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amd/pm: do not use drm middle layer for debugfsNirmoy Das3-19/+14
Use debugfs API directly instead of drm middle layer. v2: * checkpatch.pl: use '0444' instead of S_IRUGO. * remove S_IFREG from mode. * remove mode variable. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amd/display: do not use drm middle layer for debugfsNirmoy Das3-33/+20
Use debugfs API directly instead of drm middle layer. v2: * checkpatch.pl: use '0444' instead of S_IRUGO. * remove S_IFREG from mode. * remove mode variable. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amdgpu: remove CONFIG_DRM_AMDGPU_GART_DEBUGFSNirmoy Das4-94/+0
Removed unused CONFIG_DRM_AMDGPU_GART_DEBUGFS code. We can use umr instead of this gart debugfs. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amdgpu: do not keep debugfs dentryNirmoy Das7-98/+51
Cleanup unnecessary debugfs dentries and surrounding functions. v3: remove return value check for debugfs_create_file() v2: remove ttm_debugfs_entries array. do not init variables. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amdgpu/display: remove hdcp_srm sysfs on device removalNirmoy Das3-3/+4
Fixes: 9037246bb2da5 ("drm/amd/display: Add sysfs interface for set/get srm") Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-19drm/amdgpu: fix CGTS_TCC_DISABLE register offset on gfx10.3Marek Olšák1-12/+10
This fixes incorrect TCC harvesting info reported to userspace. The impact was a very very tiny performance degradation (unnecessary GL2 cache flushes). Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-02-17drm: Switch to %p4cc format modifierSakari Ailus5-15/+10
Switch DRM drivers from drm_get_format_name() to %p4cc. This gets rid of a large number of temporary variables at the same time. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-4-sakari.ailus@linux.intel.com
2021-02-15Merge branches 'acpi-misc', 'acpi-cppc', 'acpi-docs', 'acpi-config' and ↵Rafael J. Wysocki1-2/+2
'acpi-apei' * acpi-misc: ACPI: Test for ACPI_SUCCESS rather than !ACPI_FAILURE ACPI: Use DEVICE_ATTR_<RW|RO|WO> macros * acpi-cppc: ACPI: CPPC: initialise vaddr pointers to NULL ACPI: CPPC: add __iomem annotation to generic_comm_base pointer ACPI: CPPC: remove __iomem annotation for cpc_reg's address * acpi-docs: Documentation: ACPI: add new rule for gpio-line-names * acpi-config: ACPI: configfs: add missing check after configfs_register_default_group() * acpi-apei: ACPI: APEI: ERST: remove unneeded semicolon ACPI: APEI: Add is_generic_error() to identify GHES sources
2021-02-10Revert "drm/amd/display: Update NV1x SR latency values"Alex Deucher1-2/+2
This reverts commit 4a3dea8932d3b1199680d2056dd91d31d94d70b7. This causes blank screens for some users. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1482 Cc: Alvin Lee <alvin.lee2@amd.com> Cc: Jun Lei <Jun.Lei@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-12 18:04:34 +0300