| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[Why]
Currently there's an issue on DCN401 that prevents oled eDP panels from
being lit up that is still under investigation. To unblock dev work
while investigating, we can work around the issue by skipping toggling
the enablement of the backlight.
[How]
- new debug bit that will skip touching backlight enable DPCD for oled
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Add parameters for set_abm_event to enable varibright scaling.
VariBright Scaling is a feature to refer to system states like
1. Power mode
2. Battery Life percent
3. FullScreen video
4. Backlight slider
to adjust variBright strength to get low power or user experience.
[How]
Add parameters of set_abm_event for VB Scaling
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Chun-LiangChang <chuchang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The values calculated in optc1_get_otg_active_size are assigned to the
wrong output parameters, vertical blank is being used for horizontal size
and vice versa. This results in DPG test pattern looking wrong during
hardware init, as the DPG dimensions get assigned from this output, and
potentially other issues.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
When updating clocks via SMU, DAL needs to wait for requests to be fulfilled
before proceeding.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
In order to support glitchless display clock ramping for virtual stream,
we must
turn on symclk for stream encoder. The code will power on phy and enable
symclk
for dio encoder during virtual stream dpms sequence.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Vbios & Driver have difference pixel rate div policy.
When enabling fast boot & performing blank & unblank w/o timing setting,
pixel clock & pixel rate dividor are not match.
It would cause too high pixel reate and eDP would be black screen.
[How]
We would keep pixel rate div setting by Vbios until next timing setting.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: yi-lchen <yi-lchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are a few spelling mistakes in dml2_printf messages. Fix them.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
categories
Currently when one enables driver debugging dmesg gets spammed, at I
suspect vblank rate, with messages like:
[drm:amdgpu_dm_atomic_check [amdgpu]] MPO enablement requested on crtc:[00000000f073c3bb]
Fix if by converting some logging from deprecated and incorrect
DRM_DEBUG_DRIVER to drm_dbg_atomic. Plus some localized drive-by changes
to drm_dbg_kms.
By no means an exhaustive conversion but at least it allows turning on
driver debug selectively.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.10-2024-05-30:
amdgpu:
- RAS fix
- Fix colorspace property for MST connectors
- Fix for PCIe DPM
- Silence UBSAN warning
- GPUVM robustness fix
- Partition fix
- Drop deprecated I2C_CLASS_SPD
amdkfd:
- Revert unused changes for certain 11.0.3 devices
- Simplify APU VRAM handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530202316.2246826-1-alexander.deucher@amd.com
|
|
The scaler_data structure is implicitly copied onto the stack twice by
being returned from a function. This is usually a bad idea, but it
was not flagged by the compiler until a recent addition that pushed
it over the 1024 byte function stack limit:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_translation_helper.c: In function 'populate_dml_plane_cfg_from_plane_state':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_translation_helper.c:1075:1: error: the frame size of 1032 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Use an explicit kzalloc() and memcpy() instead here to keep it off the
stack.
Fixes: 00c391102abc ("drm/amd/display: Add misc DC changes for DCN401")
Fixes: 7966f319c66d ("drm/amd/display: Introduce DML2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Putting excessively large objects on a function stack causes
a warning about possibly overflowing the 8KiB of kernel stack:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn401/dcn401_resource.c: In function 'dcn401_update_bw_bounding_box':
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn401/dcn401_resource.c:1599:1: error: the frame size of 1196 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
1599 | }
| ^
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_state.c: In function 'dc_state_create':
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_state.c:221:1: error: the frame size of 1196 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
221 | }
| ^
Use dynamic allocation instead.
Fixes: e779f4587f61 ("drm/amd/display: Add handling for DC power mode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The graphics_object_id structure is meant to fit into 32 bits, as it's
passed by value in and out of functions. A recent change increased
the size to 128 bits, so it's now always passed by reference, which
is clearly not intended and ends up producing a compile-time warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_factory.c: In function 'construct_phy':
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_factory.c:743:1: error: the frame size of 1040 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Add back the bitfields to revert to the original size, while keeping
the 'enum' type change.
Fixes: fec85f995a4b ("drm/amd/display: Fix compiler redefinition warnings for certain configs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This structure is too large to fit on a stack, as shown by the
newly introduced warnings from a recent code change:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn32/dcn32_resource.c: In function 'dcn32_update_bw_bounding_box':
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn32/dcn32_resource.c:2019:1: error: the frame size of 1180 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn321/dcn321_resource.c: In function 'dcn321_update_bw_bounding_box':
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn321/dcn321_resource.c:1597:1: error: the frame size of 1180 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_state.c: In function 'dc_state_create':
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_state.c:219:1: error: the frame size of 1184 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Instead of open-coding the assignment of a large structure to a stack
variable, use an explicit kmemdup() in each case to move it off the stack.
Fixes: e779f4587f61 ("drm/amd/display: Add handling for DC power mode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Allocate some memory, send the address in chunks to dmub, and finally
ask it to copy the bounding box data into the newly allocated memory.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
New commands for enabling copy of DC bounding box values from VBIOS DMUB
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move creation of CGS device node and the DAL allocation list from
amdgpu_dm_init() to dm_sw_init() which runs before dmub's sw init hook.
This is required for communicating with the VBIOS DMUB image from the
VBIOS that was loaded for early pre-os boot.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When ODM slice happens on DCN401, there is a null pointer exception
caused by that. This commit address this issue by checking if the
required data structures are initialized.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
All the DC_FP_START/END should be used before call anything from DML2,
for this reason, the use of those guards inside DML it is not correct.
This commit removes two unnecessary DC_FP_START/END from a dml2
function.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DCN401 is using DCN 320 headers, which does not have all the right
registers for DCN401. This commit just replace DCN320 includes with the
one from DCN410.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Drop the extra HPD irq entry for DCN401.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Most of the DML code is generated, and it is necessary to update some
parts of it from time to time. This commit brings the latest generated
code for DML 2.1.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
cleaning up the code refactor requires hubp to be in its own component.
[how]
move all files under newly created hubp folder and fixing the makefiles.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Pinninti <bpinnint@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit removes some unused code with the required adjustments.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Enable sharpener support for DCN401
[How]
- Removed memcmp check that was preventing ISHARP from being enabled.
- Add missing ISHARP register defines, masks, and writes.
- Add programming of Blur and Scale coefficients.
- Program FMT_MODE and NLDELTA registers based on LLS_PREF and pixel
- format
- Only enable ISHARP for YUV420
- Add disabling of ISHARP
- Add debug flags and registry keys for debugging ISHARP.
- Set default to medium level
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Incorrect cursor position calculation in some scenarios. Also for
mirror and rotation cases.
[How]
Fix for incorrect cursor position. Added new test scenarios for diags
cursor test. Updated CRC for few of the diags cursor test scenarios.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sridevi <sarvinde@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No functional modification involved.
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:5200 dc_power_down_on_boot() warn: inconsistent indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9166
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Let's start the new release cycle.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Some fixes for the end of the merge window, mostly amdgpu and panthor,
with one nouveau uAPI change that fixes a bad decision we made a few
months back.
nouveau:
- fix bo metadata uAPI for vm bind
panthor:
- Fixes for panthor's heap logical block.
- Reset on unrecoverable fault
- Fix VM references.
- Reset fix.
xlnx:
- xlnx compile and doc fixes.
amdgpu:
- Handle vbios table integrated info v2.3
amdkfd:
- Handle duplicate BOs in reserve_bo_and_cond_vms
- Handle memory limitations on small APUs
dp/mst:
- MST null deref fix.
bridge:
- Don't let next bridge create connector in adv7511 to make probe
work"
* tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernel:
drm/amdgpu/atomfirmware: add intergrated info v2.3 table
drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2
drm/amdkfd: Let VRAM allocations go to GTT domain on small APUs
drm/amdkfd: handle duplicate BOs in reserve_bo_and_cond_vms
drm/bridge: adv7511: Attach next bridge without creating connector
drm/buddy: Fix the warn on's during force merge
drm/nouveau: use tile_mode and pte_kind for VM_BIND bo allocations
drm/panthor: Call panthor_sched_post_reset() even if the reset failed
drm/panthor: Reset the FW VM to NULL on unplug
drm/panthor: Keep a ref to the VM at the panthor_kernel_bo level
drm/panthor: Force an immediate reset on unrecoverable faults
drm/panthor: Document drm_panthor_tiler_heap_destroy::handle validity constraints
drm/panthor: Fix an off-by-one in the heap context retrieval logic
drm/panthor: Relax the constraints on the tiler chunk size
drm/panthor: Make sure the tiler initial/max chunks are consistent
drm/panthor: Fix tiler OOM handling to allow incremental rendering
drm: xlnx: zynqmp_dpsub: Fix compilation error
drm: xlnx: zynqmp_dpsub: Fix few function comments
|
|
MST colorspace property support was disabled due to a series of warnings
that came up when the device was plugged in since the properties weren't
made at device creation. Create the properties in advance instead.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 69a959610229 ("drm/amd/display: Temporary Disable MST DP Colorspace Property").
Reported-and-tested-by: Tyler Schneider <tyler.schneider@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3353
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing cleanup from Steven Rostedt:
"Remove second argument of __assign_str()
The __assign_str() macro logic of the TRACE_EVENT() macro was
optimized so that it no longer needs the second argument. The
__assign_str() is always matched with __string() field that takes a
field name and the source for that field:
__string(field, source)
The TRACE_EVENT() macro logic will save off the source value and then
use that value to copy into the ring buffer via the __assign_str().
Before commit c1fa617caeb0 ("tracing: Rework __assign_str() and
__string() to not duplicate getting the string"), the __assign_str()
needed the second argument which would perform the same logic as the
__string() source parameter did. Not only would this add overhead, but
it was error prone as if the __assign_str() source produced something
different, it may not have allocated enough for the string in the ring
buffer (as the __string() source was used to determine how much to
allocate)
Now that the __assign_str() just uses the same string that was used in
__string() it no longer needs the source parameter. It can now be
removed"
* tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/treewide: Remove second parameter of __assign_str()
|
|
MST colorspace property support was disabled due to a series of warnings
that came up when the device was plugged in since the properties weren't
made at device creation. Create the properties in advance instead.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 69a959610229 ("drm/amd/display: Temporary Disable MST DP Colorspace Property").
Reported-and-tested-by: Tyler Schneider <tyler.schneider@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3353
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dc_stream_program_cursor_position
The fix involves adding a null check for 'stream' at the beginning of
the function. If 'stream' is NULL, the function immediately returns
false. This ensures that 'stream' is not NULL when we dereference it to
access 'ctx' in 'dc = stream->ctx->dc;' the function.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:398 dc_stream_program_cursor_position()
error: we previously assumed 'stream' could be null (see line 397)
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c
389 bool dc_stream_program_cursor_position(
390 struct dc_stream_state *stream,
391 const struct dc_cursor_position *position)
392 {
393 struct dc *dc;
394 bool reset_idle_optimizations = false;
395 const struct dc_cursor_position *old_position;
396
397 old_position = stream ? &stream->cursor_position : NULL;
^^^^^^^^
The patch adds a NULL check
--> 398 dc = stream->ctx->dc;
^^^^^^^^
The old code didn't check
399
400 if (dc_stream_set_cursor_position(stream, position)) {
401 dc_z10_restore(dc);
402
403 /* disable idle optimizations if enabling cursor */
404 if (dc->idle_optimizations_allowed &&
405 (!old_position->enable || dc->debug.exit_idle_opt_for_cursor_updates) &&
406 position->enable) {
407 dc_allow_idle_optimizations(dc, false);
Fixes: f63f86b5affc ("drm/amd/display: Separate setting and programming of cursor")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Errors in amdgpu_dm_init() are silently ignored and dm_hw_init()
will succeed. However often these are fatal errors and it would
be better to pass them up.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit modifies the construct_phy function to handle the case where
`bios->integrated_info` is NULL and to address a compiler warning about
a large stack allocation.
Upon examination, it was found that the local `integrated_info`
structure was just used to copy values which is large and was being
declared directly on the stack which could potentially lead to
performance issues. This commit changes the code to use
`bios->integrated_info` directly, which avoids the need for a large
stack allocation.
The function now checks if `bios->integrated_info` is NULL before
entering a for loop that uses it. If `bios->integrated_info` is NULL,
the function skips the for loop and continues executing the rest of the
code. This ensures that the function behaves correctly when
`bios->integrated_info` is NULL and improves compatibility with dGPUs.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_factory.c: In function ‘construct_phy’:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_factory.c:743:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Jerry Zuo <jerry.zuo@amd.com>
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
|
|
[Why]
Commit:
- commit 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement")
accidently overwrite the commit
- commit 54d217406afe ("drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2")
which cause regression.
[How]
Recover the original NULL fix and remove the unnecessary input parameter 'state' for
drm_dp_add_payload_part2().
Fixes: 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement")
Reported-by: Leon Weiß <leon.weiss@ruhr-uni-bochum.de>
Link: https://lore.kernel.org/r/38c253ea42072cc825dc969ac4e6b9b600371cc8.camel@ruhr-uni-bochum.de/
Cc: lyude@redhat.com
Cc: imre.deak@intel.com
Cc: stable@vger.kernel.org
Cc: regressions@lists.linux.dev
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307062957.2323620-1-Wayne.Lin@amd.com
(cherry picked from commit 4545614c1d8da603e57b60dd66224d81b6ffc305)
|
|
[Why]
Commit:
- commit 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement")
accidently overwrite the commit
- commit 54d217406afe ("drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2")
which cause regression.
[How]
Recover the original NULL fix and remove the unnecessary input parameter 'state' for
drm_dp_add_payload_part2().
Fixes: 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement")
Reported-by: Leon Weiß <leon.weiss@ruhr-uni-bochum.de>
Link: https://lore.kernel.org/r/38c253ea42072cc825dc969ac4e6b9b600371cc8.camel@ruhr-uni-bochum.de/
Cc: lyude@redhat.com
Cc: imre.deak@intel.com
Cc: stable@vger.kernel.org
Cc: regressions@lists.linux.dev
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307062957.2323620-1-Wayne.Lin@amd.com
|
|
'dc_reg_sequence' was added in
commit 44788bbc309b ("drm/amd/display: refactor reg_update")
but isn't actually used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
'aux_payloads' is unused since
commit eae5ffa9bd7b ("drm/amd/display: Switch ddc to new aux interface")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This version pairs with DMUB FW Release 0.0.218.0 for dcn314/315/316, dcn35/351, dcn401
and brings along the following:
- Fix powerpc compilation
- Fix TBT+TypeC Daisy-chain lightup
- Fix ODM combine setup
- Fix OTC underflow on dcn35
- Fix DVI config for dcn401
- Add ips status info to debugfs
- Add 3DLUT DMA load trigger
- Modify clock programming to support DPM
- Disable dcn401 idle optimizations
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Compilation errors while compiling without CONFIG_DRM_AMD_DC_FP:
"undefined reference to `dc_bandwidth_in_kbps_from_timing'"
[How]
Fix Makefile to move dsc files out of DC_FP guard.
Fixes: 00c391102abc ("drm/amd/display: Add misc DC changes for DCN401")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When the link BW is smaller than the request BW,
the DP LT just kept running and fallback to lower link config.
DP LT just aborted if is_hpd_pending bit is high.
But is_hpd_pending bit indicates a new HPD event received.
It doesn't mean the HPD is low.
[How]
Abort the DP LT if the link BW is smaller than the request BW.
Remove checking is_hpd_pending bit in DP LT.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Cruise <cruise.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
At the time of block sequence construction, the exact reference DPP/DISP clock is
not yet known, so the clock should be passed by reference to the DTO programming
function.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
Disable to improve stability for now.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
There is a corner case where we're in an ODM config that
has recout.x != 0. In these scenarios we have to take into
account the extra offset in the ODM adjustment for cursor.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
A recent change for ODM combine refactor contains a typo which causes ODM
combine mode programmed incorrectly.
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Disable idle optimization for each atomic commit is unnecessary,
and can lead to a potential race condition.
[How]
Remove idle optimization check from amdgpu_dm_atomic_commit_tail()
Fixes: 196107eb1e15 ("drm/amd/display: Add IPS checks before dcn register access")
Cc: stable@vger.kernel.org
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Missing check for when there is new pipe configuration but both cur_pipe
and new_pipe are both populated causing update_state of DSC for that
instance not being updated correctly.
This causes some display mode changes to cause underflow since DSCCLK
is still gated when the display requires DSC.
[How]
Added another condition in the new pipe addition branch that checks if
there is a new pipe configuration and if it is not the same as cur_pipe.
cur_pipe does not necessarily have to be NULL to go in this branch.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
For debugging and testing purposes.
[How]
If IPS is supported create ips_status debugfs entry.
Usage: cat /sys/kernel/debug/dri/0/amdgpu_dm_ips_status
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Reset the shared dmub firmware region on dmub hw init to start with
known state.
[How]
Memset the shared region to 0 in dmub_hw_init().
Suggested-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
