summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)AuthorFilesLines
2020-07-01drm/amdgpu/display: Unlock mutex on errorJohn van der Kamp1-2/+4
Make sure we pass through ret label to unlock the mutex. Signed-off-by: John van der Kamp <sjonny@suffe.me.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: 3.2.91Aric Cyr1-1/+1
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Fix ineffective setting of max bpc propertyStylon Wang1-1/+2
[Why] Regression was introduced where setting max bpc property has no effect on the atomic check and final commit. It has the same effect as max bpc being stuck at 8. [How] Correctly propagate max bpc with the new connector state. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: [FW Promotion] Release 1.0.19Anthony Koo1-4/+5
[Header Changes] - Add debug flag for psr to use hw locking mgr state machine Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: DP link layer test 4.2.1.1 fix due to specs updateWenjing Liu9-50/+59
[why] DP link layer CTS specs updated to change the test parameters in test 4.2.1.1. Before it requires source to delay 400us on aux no reply. With the specs updates Errata5, it requires source to delay 3.2ms (based on LTTPR aux timeout) This causes our test to fail after updating with the latest test equipment firmware. [how] the change is to allow LTTPR 3.2ms aux timeout delay by default. And set back to 400us if LTTPR feature is not enabled. We will set 3.2ms and always enable LTTPR non transparent mode if LTTPR feature is enabled and LTTPR is present. Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: allow query ddc data over aux to be read only operationWenjing Liu1-11/+18
[why] Two issues: 1. Add read only operation support for query ddc data over aux. 2. Fix a bug where if read size is multiple of 16, mot of the last read transaction will not be set to 0. Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Compare v_front_porch when checking if streams are ↵David Galiffi1-0/+4
synchronizable [Why] If the front porch of the two timings differ, then there may not be enough time while both streams are in vertical blank to perform a memory clock change. This can hang the system. [How] Check the each streams timing.v_front_porch when determining if the two streams are synchronizable. Signed-off-by: David Galiffi <David.Galiffi@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: enable seamless boot for dcn30Martin Leung2-127/+126
why: seamless boots requires split of init_hw into hw and pipes to work. This was implemented in dcn10_init_hw but did not apply yet to dcn30. how: Copy over dcn10_init_hw and adapt it to dcn30 using recent changes to dcn3. Behavior will be different in init sequence. Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Red screen observed on startupPeikang Zhang1-1/+2
[Why] We try to to change new_clocks->dppclk_khz to 100000 when new_clocks->dppclk_khz is 0 [How] Don't change new_clocks->dppclk_khz value when new_clocks->dppclk_khz is 0 Signed-off-by: Peikang Zhang <peikang.zhang@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Allow 4 split on 10K 420 modesChris Park2-5/+5
[Why] 10K YCbCr420 does not need ODM 4:1, but it requires MPC 4 split indicated on the flags. [How] Make pixel encoding and resolution size specific workaround to enable ODM combine on YCbCr420 high resolution modes. Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: VSC SDP supported for SSTDerek Lai2-4/+2
[why] If a typeC to HDMI dongle supports YCbCr420 pass through and VSC colorimetry and pixel encoding formats in the Extended Receiver Capability, we shall allow VSC SDP to be used. [How] The Extended Receiver Capability field shall check the EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT bit in the TRAINING_AUX_RD_INTERVAL register. Removed DPCD rev checking for VSC SDP. Signed-off-by: Derek Lai <Derek.Lai@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Fill in dmub_srv fw_version from firmware metadataNicholas Kazlauskas1-0/+10
[Why] DMCUB firmware version is now available from firmware metadata block. We should be passing this into dmub_srv so we can know when to apply firmware version specific functionality like using CW4 only instead of the REGION4. [How] We don't have the helpers for DM to actually extract out firmware metadata block themselves. We could add that and add helpers in DM to grab this, but not every creation sequence has firmware instruction before dmub_srv_create. Easiest way to handle this is to fill this in automatically per DM in the place we do have it - when calculating the region parameters. But only fill it in if DM already hasn't in case we need to override with a specific version. We aren't do anything firmware version specific in dmub_srv_create today that does require fw_version, so while it's a little unituitive to do it when calculating region parameters it works for now. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Enable output_bpc property on all outputsStylon Wang1-1/+3
[Why] Connector property output_bpc is available on DP/eDP only. New IGT tests would benifit if this property works on HDMI. [How] Enable this read-only property on all types of connectors. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Force ODM combine on 5K+ 420 modesChris Park1-0/+10
[Why] All YCbCr420 resolutions 5K and above have tiling and discoloration issues. The issue can be remedied by forcing ODM combine from 5K to 8K. 10K resolution requires ODM 4:1. The mechanism of what the real problem is, that is inherent in ODM combine programming, doesn't seem to be pointed at singular register programming (CLK, MPC, DCSURF, etc.), and needs more in-depth programming sequence review for these new use case scenarios. Until then, workaround to enable ODM combine is proposed. While it is not our policy, HW spreadsheet also recommends turning on ODM for these scenario to lower the voltage. [How] Make pixel encoding and resolution size specific workaround to enable ODM combine on YCbCr420 high resolution modes. Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: fix 4to1 odm MPC_OUT_FLOW_CONTROL_COUNTDmytro Laktyushkin1-1/+1
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: use dispclk AVFS for dppclkBrandon Syu2-5/+14
[Why] There is using pixelclk AVFS for dppclk, that would cause issue. [How] To use dispclk AVFS for both dispclk and dppclk. There would choose dppclk for request voltage when dispclk wouldn't be updated case. If dispclk need to be updated, then it'll choose the bigger one from dppclk and dispclk for request voltage. Signed-off-by: Brandon Syu <Brandon.Syu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: add mechanism to skip DCN initEric Yang10-72/+46
[Why] If optimized init is done in FW. DCN init be skipped in driver. This need to be communicated between driver and fw and maintain backwards compatibility. [How] Use DMUB scratch 0 bit 2 to indicate optimized init done in fw and use DMUB scatch 4 bit 0 to indicate drive supports the optimized flow so FW will perform it. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: fine tune logic of edid max TMDS clock checkDale Zhao2-6/+2
[WHY] Check max_tmds_clk_mhz firstly will restrict pixel clock under HDMI 1.4, thus HDMI2.0 port can't correctly support 4K 60Hz. [HOW] Fine tune the logic to check max_forum_tmds_clk_mhz firstly. Signed-off-by: Dale Zhao <dale.zhao@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Added local_sink null check before accessJake Wang1-2/+4
[Why & How] Need to check if local_sink is NULL before accessing. Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: clip plane rects in DM before passing into DCAurabindo Pillai1-0/+25
[Why] DC global validation can fail when userspace requests to draw large plane without performing the clipping themselves. This is observed in the IGT kms_plane panning tests for 4K displays where they draw an 8K plane without any clipping while expecting only the top 4K to be drawn. [How] DRM already has helpers to take care of the clipping necessary and to mark whether a plane is visible or not, so make use of these helpers in DM before passing the plane to DC. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: 3.2.90Aric Cyr1-1/+1
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: [FW Promotion] Release 1.0.18Anthony Koo1-6/+39
[Header Changes] - Update scratch information for boot status Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Correctly respond in psr enablement interfaceCamille Cho1-2/+4
[Why] dc_link_set_psr_allow_active() always returns true, even in the case that PSR is not supported. [How] Hook up the return value of dc_link_set_psr_allow_active(). Signed-off-by: Camille Cho <Camille.Cho@amd.com> Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Fix DML failures caused by doubled stereo viewportNicholas Kazlauskas2-2/+17
[Why] Side-by-side and Top-and-bottom stereo configurations fail DML mode validation due to Viewport exceeded. This is because we consider the planes as being pipe split in pipe population so we end up doubling the viewport width, eg. from 4k to 8k. [How] These pipes technically aren't hsplit, so add a check for determining whether is_hsplit should be set. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: enable assrBhawanpreet Lakha2-0/+38
[Why] assr is content protection for eDP, in order to use it we need to call psp ta (dtm) [How] We have a enable_assr callback, hook into this and call the correct psp cmd id to enable assr. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: implement edid max TMDS clock check in DCMichael Strauss2-0/+13
[WHY] Currently DC doesn't check requested pixel clock against an EDID specified TMDS max clock if it exists, passing modes that should fail [HOW] Add max TMDS clk to edid caps and perform check during validation Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: [FW Promotion] Release 1.0.17Anthony Koo1-2/+2
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Fixed using wrong eDP power sequence function pointerYi-Ling Chen1-2/+2
[why] dc->hwss->edp_backlight_control is null, it would casue it only be off main-link of eDP. It is not worng behavior for eDP power sequence off. [how] Must use hwseq->funcs.edp_backlight_control finction pointer for edp backlight. Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com> Reviewed-by: Sung Lee <Sung.Lee@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Fix calculation of virtual channel payloadMikita Lipski2-11/+10
[why] The calculation of virtual channel payload would not take link settings in account. As we calculate VCPI slots needed both PBN for stream and also PBN per time slot. Before we would use generic PBN per time slot, which would not change with link settings causing wrong Payload allocation. [how] Provide PBN per time slot for each Virtual channel payload calculation. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: [FW Promotion] Release 1.0.16Anthony Koo1-2/+2
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Use dmub fw to lock pipe, cursor, digWyatt Wood8-14/+200
[Why] Hw lock manager adds the ability to lock pipe, cursor, and dig in fw. [How] Send hw lock command to fw to lock pipe, cursor, and dig. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: fix compilation error on allmodconfigQingqing Zhuo1-5/+1
when compiled with allmodconfig option, there are error messages as below: ERROR: modpost: "mod_color_is_table_init" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! ERROR: modpost: "mod_color_get_table" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! ERROR: modpost: "mod_color_set_table_init_state" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! To fix the issue, this commits removes CONFIG_DRM_AMD_DC_DCN guard in color/makefile. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> CC: Lewis Huang <Lewis.Huang@amd.com> CC: Aric Cyr <Aric.Cyr@amd.com> CC: Alexander Deucher <Alexander.Deucher@amd.com> CC: Harry Wentland <hwentlan@amd.com> CC: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> CC: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> CC: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Update bounding box states (v2)Alvin Lee1-41/+22
[Why] We need to update each p-state in the bounding box [How] Update states when assigning values to clocks v2: squash in patch to set min values (Alex) Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdgpu/display: properly guard the calls to swSMU functionsAlex Deucher1-2/+2
It's only applicable on newer asics. We could end up here when using DC on older asics like SI or KV. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1170 Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdgpu/display bail early in dm_pp_get_static_clocksAlex Deucher1-0/+2
If there are no supported callbacks. We'll fall back to the nominal clocks. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1170 Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: label internally used symbols as staticNirmoy Das4-26/+28
Used sparse(make C=1) to find these loose ends. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Update DCN3 bounding boxAlvin Lee1-12/+102
[Why] We want to update the bounding box to have more granular control of the DCFCLK. [How] Setup DCFCLK to use STA values and also optimal values based on UCLK. Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Get num_chans from VBIOS tableAlvin Lee4-1/+110
Get the values from VBIOS table Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd: add missing fill of the array`s first elementBernard Zhao1-0/+1
In function fill_iram_v_2, the ram_table->bright_neg_gain`s first element [0][0] seems to be missing. This change is just to make the code a bit readable. Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: 3.2.89Aric Cyr1-1/+1
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: [FW Promotion] Release 1.0.15Anthony Koo1-3/+65
[Header Changes] - Add new initialization bits for driver to check firmware status - Add command for HW locking via DMUB Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Not doing bios data pack.Yongqiang Sun1-0/+5
[Why] dmub FW running abnormal after resume from S0i3 due to data aliagnment issue. [How] Before having a solution for this issue, temparory not doing data pack. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Sung Lee <Sung.Lee@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: not reset dmub in driver.Yongqiang Sun1-1/+5
[Why] during S0i3, set power state is toggled a few times, and dmub uC will restart with current reset/hw_init. [How] Remove reset in set power state, and before doing hw_init, check if dmub is enabled, and doing FW autoload check only if dmub is already enabled. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Disable pipe split for modes with bordersDale Zhao1-0/+17
[Why] For some special timing with border, like DMT 640*480 72Hz, pipe split can't handle well. Thus, it will be black screen for these special timing. [How] Disable pipe split for these timing with borders as W/A. Signed-off-by: Dale Zhao <dale.zhao@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: change global buffer to local bufferLewis Huang6-59/+183
[Why] Multi-adapter calculate regamma table at the same time. Two thread used the same global variable cause race condition. [How] Change global buffer to local buffer Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Improve DisplayPort monitor interopAric Cyr4-13/+26
[Why] DC is very fast at link training and stream enablement which causes issues such as blackscreens for non-compliant monitors. [How] After debugging with scaler vendors we implement the minimum delays at the necessary locations to ensure the monitor does not hang. Delays are generic due to lack of IEEE OUI information on the failing displays. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Enable use of dmub iff dmcu is disabledAurabindo Pillai1-0/+2
[Why & How] DMUB command table should be allowed to be used only if dmcu is explicitly disabled. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: make calculate watermarks a function pointerDmytro Laktyushkin1-1/+5
To allow code reuse with minimal duplication watermark calculation needs to be function pointer. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Add helper to convert DC statusRodrigo Siqueira3-5/+69
During the debugging process related to a hot-plug problem with 4k display, we realized that we had some issues related to the global state validation. This problem was not explicitly highlighted in the dmesg log, for this reason, this commit adds a function that converts `enum dc_status` to a human-readable string and appends the proper warning message in case of failure. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: add support for per-state dummy-pstate latencyJun Lei1-0/+6
[why] Dummy pstate latency actually varies between different UCLK frequencies, when calculating watermark C, if DAL always assumes worst case, then it can lead to dummy pstate not supported scenarios. [how] Rather than statically calculating dummy pstate using worst case, we store the entire table of UCLK to dummy pstate relationships. On a per mode basis, we calculate the actual UCLK lower limit, and use the dynamic worst case dummy pstate latency. This prevents the situation where we don't support full p-state (which will force high DPM), but still use low DPM dummy pstate latency. Signed-off-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 06:42:01 +0300