summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/link
AgeCommit message (Collapse)AuthorFilesLines
2023-07-18drm/amd/display: Add link encoding to timing BW calculation parametersGeorge Shen5-9/+26
[Why] There certain cases where the timing BW is dependent on the type of link encoding in use. Thus to calculate the correct BW required for a given timing, the link encoding should be added as a parameter. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: refine to decide the verified link settingZhikai Zhai1-5/+12
[WHY] We return false by default when link training fail at link loss. It will cause we get a fail verified link caps directly. [HOW] Record the highest verified link caps. Use the recorded value as the verified link caps if it is not successful in the last attempt to avoid to use the lowest link setting. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Fix DP2 link training failure with RCODaniel Miess1-0/+10
[Why] When RCO is enabled for symclk32_le we get failures during DP2 link traing compliance tests. [How] Break out symclk32_le RCO into a separate function that is called for hpo when link is enabled/disabled. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Cache backlight_millinits in link structure and setting ↵Nicholas Susanto4-3/+15
brightness accordingly [Why] Need to save the cached backlight level so that display lights up using appropriate brightness level instead of the default brightness when waking up from s0i3. [How] Adding a backlight level cache in link structure. Also instead on calling set_default_brightness_aux, check if cached values exists. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Re-add aux intercept disable delay generically for 2+ LTTPRsMichael Strauss1-13/+12
[WHY] Issue not display generic, required for multiple 2+ LTTPR link configurations. [HOW] Revert monitor patch change and remove delay for single LTTPR case Reviewed-by: George Shen <george.shen@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Setup stream encoder before link enable for TMDSJinZe Xu1-0/+7
[Why] HDMI spec requires TMDS clock to be not more than 340MHz. Stream encoder ensure this requirement but driver enable stream encoder later than PHY. So PHY will output full speed TMDS clock first. [How] Enable stream encoder first in TMDS case. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: JinZe Xu <jinze.xu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-30drm/amd/display: Work around bad DPCD state on link lossIlya Bakoulin1-0/+26
[Why] This display doesn't properly indicate link loss through DPCD bits such as CR_DONE / CHANNEL_EQ_DONE / SYMBOL_LOCKED / INTERLANE_ALIGN_DONE, which all remain set. In addition, DPCD200Eh doesn't match the value of DPCD204h in all cases. For these reasons, we can miss re-training the link, since we don't properly detect link loss with this display. [Why] Add display-specific workaround to read DPCD204h, so that we can detect link loss based on 128b132b-specific status bits in this register. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-23drm/amd/display: Fix 128b132b link loss handlingIlya Bakoulin1-2/+9
[Why] We don't check 128b132b-specific bits in LANE_ALIGN_STATUS_UPDATED DPCD registers when parsing link loss status, which can cause us to miss a link loss notification from some sinks. [How] Add a 128b132b-specific status bit check. Cc: stable@vger.kernel.org # 6.3+ Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: limit DPIA link rate to HBR3Peichen Huang1-0/+5
[Why] DPIA doesn't support UHBR, driver should not enable UHBR for dp tunneling [How] limit DPIA link rate to HBR3 Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Peichen Huang <peichen.huang@amd.com> Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Add control flag to dc_stream_state to skip eDP BL off/link offMax Tseng1-3/+4
Add control flag to dc_stream_state to skip eDP BL off/link off. Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Max Tseng <max.tseng@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: clean up some inconsistent indentingJiapeng Chong1-2/+2
No functional modification involved. drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dpms.c:2377 link_set_dpms_on() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5376 Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Clean FPGA code in dcQingqing Zhuo3-197/+109
[Why] Drop dead code for Linux. [How] Remove all IS_FPGA_MAXIMUS_DC and IS_DIAG_DC Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: lower dp link training message levelHersen Wu1-4/+13
[Why] some test apps report dp link training waring even dp training pass. there are 4 tries of lt within perform_link_training_with_retries. if lt pass within 4 tries, it will NOT be reated as lt failure. for each try of lt, if lt fails, current driver implementation prints message at warning level. this let people think dp lt does not work properly. [How] for 1st, 2nd and 3rd try of lt, print message at debug level. for the 4th try of lt, print message at warning level. Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Convert connector signal id to stringRodrigo Siqueira1-4/+2
To improve the readability of the of the log, this commit introduces a function that converts the signal type id to a human-readable string. Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: enable dpia validateMustapha Ghaddar1-0/+3
Use dpia_validate_usb4_bw() function Fixes: a8b537605e22 ("drm/amd/display: Add function pointer for validate bw usb4") Reviewed-by: Roman Li <roman.li@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Add w/a to disable DP dual mode on certain portsGeorge Shen1-0/+4
[Why] Certain ports on DCN3.2 configs do not properly populate the BIOS info table flag to indicate DP dual mode is unsupported. [How] Add a workaround to disable DP dual mode on the ports with the missing BIOS info table flag. Reviewed-by: Michael Strauss <Michael.Strauss@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Add logging when DP link training Channel EQ is SuccessfulSrinivasan Shanmugam2-2/+12
Log when Channel Equalization is successful. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Add logging for eDP v1.4 supported sink ratesSrinivasan Shanmugam1-0/+3
Include eDP v1.4 panels supported sink rates in debug output, useful info for knowing optimized link rates Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Jerry Zuo <jerry.zuo@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: DSC passthrough is for DP-HDMI pcon (SST pcon)Srinivasan Shanmugam1-3/+2
if check over DSC passthrough is removed, as this is not for MST use case. It is for DP-HDMI pcon use case. sst pcon is detected as sst not mst. In sst pcon dsc passthrough message will not get below log printed Fixes: 9b035d089086 ("drm/amd/display: Check & log if receiver supports MST, DSC & FEC.") Suggested-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-25drm/amd/display: Keep disable aux-i delay as 0Michael Strauss1-6/+10
[WHY] Current Aux-I sequence checks for local_sink which isn't populated on MST links [HOW] Leave disable aux-i delay as 0 for MST cases Cc: stable@vger.kernel.org Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-25drm/amd/display: Convert Delaying Aux-I Disable To Monitor PatchMichael Strauss1-6/+11
[WHY] 32ms delay was added to resolve issue with a specific sink, however this same delay also introduces erroneous link training failures with certain sink devices. [HOW] Only apply the 32ms delay for offending devices instead of globally. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: Improvement for handling edp link training failsJingwen Zhu1-0/+5
[Why] The eDP retrain will cause the DPCD 300 to be reset to default. And cause the brightness can't be set correctly. [How] delete the call to edp panel power control in both enable_link_output/disable_link_output entirely and only call edp panel control in enable_link_dp and  disable_link_dp once. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: Apply correct panel mode when reinitializing hardwareMichael Mityushkin2-1/+5
[Why] When link training during engine recovery, ASSR might fail causing panel mode to be reset to default. This should not happen for eDP as it will prevent the panel from turning back on. [How] Added dp_panel_mode to struct dc_link to remember previously applied panel mode. Do not reset panel mode to default while performing link training if previously used panel mode = eDP. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Michael Mityushkin <michael.mityushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: Adding support for VESA SCRIswara Nagulendran2-5/+33
[HOW&WHY] Write DPCD 721 bit 7 to high, and the appropriate luminance level to DPCD 734-736 if bit 4 from DPCD register 734 is high, indicating that the panel luminance control is enabled from the panel side. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Iswara Nagulendran <Iswara.Nagulendran@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: refactor dmub commands into single functionJosip Pavic2-2/+2
[Why & How] Consolidate dmub access to a single interface. This makes it easier to add code in the future that needs to run every time a dmub command is requested (e.g. instrumentation, locking etc). Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: Check & log if receiver supports MST, DSC & FEC.Srinivasan Shanmugam1-0/+16
After reading from receiver via DPCD, check & log if it supports MST, DSC & FEC Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: Unconditionally print when DP sink power state failsSrinivasan Shanmugam1-3/+1
The previous 'commit ca9beb8aac68 ("drm/amd/display: Add logging when setting DP sink power state fails")', it is better to unconditionally print "failed to power up sink", because we are returning DC_ERROR_UNEXPECTED. Fixes: ca9beb8aac68 ("drm/amd/display: Add logging when setting DP sink power state fails") Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-14drm/amd/display: Add logging when DP link training Clock recovery is SuccessfulSrinivasan Shanmugam2-1/+5
Log when Clock recovery is successful, as part of DP link training process. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-14drm/amd/display: Add logging when setting DP sink power state failsSrinivasan Shanmugam1-0/+3
Log if we fail to setup sink power states. Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-12drm/amd/display: Add logging for DP link traning Test Pattern SeqeuncesSrinivasan Shanmugam1-0/+9
Add some more logging for DP link traning test pattern seqeunces for better debugging. Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-12drm/amd/display : Log DP link training downspread infoSrinivasan Shanmugam1-6/+8
Update the existing log with DP LT downspread info: [Downstream devices shall support down spreading of the link clock. The down-spread amplitude shall either be disabled (0.0%) or up to 0.5%, as written by the upstream device to the DOWNSPREAD_CTRL register (DPCD 00107h). The modulation frequency range shall be 30 to 33 kHz] Besides, fix checkpatch warning: CHECK: Alignment should match open parenthesis Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-12drm/amd/display: Improve robustness of FIXED_VS link training at DP1 ratesMichael Strauss4-3/+393
[WHY] New sequence for transparent mode DP1.x link training was provided by LTTPR vendor [HOW] Implement new FIXED_VS sequence, increase LT retry count to minimize any potential intermittent lightup failures Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amd/display: skip CLEAR_PAYLOAD_ID_TABLE if device mst_en is 0Peichen Huang1-1/+4
[Why] Some dock and mst monitor don't like to receive CLEAR_PAYLOAD_ID_TABLE when mst_en is set to 0. It doesn't make sense to do so in source side, either. [How] Don't send CLEAR_PAYLOAD_ID_TABLE if mst_en is 0 Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amd/display: Conditionally enable 6.75 GBps link rateArtem Grishin1-5/+18
[Why] The 6.75 GBps link rate is part of the new eDP specification version 1.5 is going to be supported in the future. Since this standard is very new and there are no existing 6.75 GBps panels on the market yet, we should put a condition in the driver on enabling this feature until we can validate it with real hardware. [How] - Add boolean flag support_eDP1_5 in struct dc_debug_options. - Enable the 6.75 link rate in reduce_link_rate(...) only when the flag is true. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Artem Grishin <Artem.Grishin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amd/display: Add support for 6.75 GBps link rateArtem Grishin2-1/+7
[Why] The latest eDP spec version 1.5 defines a new generic link rate of 6.75 Gbps/Lane, which needs to be supported in the driver. [How] Added new element to the dc_link_rate enum Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Artem Grishin <Artem.Grishin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amd/display: update dig enable sequenceCharlene Liu1-5/+6
[why] HW delta follow up Reviewed-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-22drm/amd/display: Add function pointer for validate bw usb4Mustapha Ghaddar5-8/+31
[WHY] In order to follow the new protocol of calling link functions [HOW] Add the function pointer to the link_srv Reviewed-by: Kshitij Bhardwaj <kshitij.bhardwaj1@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-22drm/amd/display: power down eDP if eDP not presentPaul Hsieh1-0/+5
[Why] When init, driver will power up eDP to check eDP present or not. If eDP not present, driver doesn't power off eDP VDD cause power consumption. [How] If eDP is not present when detection, power off eDP VDD. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-22drm/amd/display/dc/link/link_detection: Demote a couple of kerneldoc abusesLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_detection.c:877: warning: Function parameter or member 'link' not described in 'detect_link_and_local_sink' drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_detection.c:877: warning: Function parameter or member 'reason' not described in 'detect_link_and_local_sink' drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_detection.c:1232: warning: Function parameter or member 'link' not described in 'dc_link_detect_connection_type' Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lee Jones <lee@kernel.org> Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-22drm/amd/display/dc/link/protocols/link_dp_capability: Demote non-compliant ↵Lee Jones1-1/+1
kerneldoc Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_capability.c:2190: warning: Function parameter or member 'link' not described in 'dc_link_is_dp_sink_present' Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-22drm/amd/display/dc/link/protocols/link_dp_capability: Remove unused variable ↵Lee Jones1-1/+1
and mark another as __maybe_unused ‘ds_port’ is clearly not used anywhere and ‘result_write_min_hblank’ is only utilised when debugging is enabled. The alternative would be to allocate the variable under the same clause as the debugging code, but that would become very messy, very quickly. Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_capability.c: In function ‘dp_wa_power_up_0010FA’: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_capability.c:280:42: warning: variable ‘ds_port’ set but not used [-Wunused-but-set-variable] drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_capability.c: In function ‘dpcd_set_source_specific_data’: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_capability.c:1296:32: warning: variable ‘result_write_min_hblank’ set but not used [-Wunused-but-set-variable] Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-22drm/amd/display/dc/link/protocols/link_dp_training: Remove set but unused ↵Lee Jones1-2/+1
variable 'result' Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training.c: In function ‘perform_link_training_with_retries’: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training.c:1586:38: warning: variable ‘result’ set but not used [-Wunused-but-set-variable] Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-22drm/amd/display/dc/link/link_detection: Remove unused variable 'status'Lee Jones1-3/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_detection.c: In function ‘query_hdcp_capability’: drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_detection.c:501:42: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-22drm/amd/display/amdgpu_dm/amdgpu_dm_helpers: Move defines out to where they ↵Lee Jones2-0/+7
are actually used Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h: At top level: drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:143:22: warning: ‘SYNAPTICS_DEVICE_ID’ defined but not used [-Wunused-const-variable=] drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:140:22: warning: ‘DP_VGA_LVDS_CONVERTER_ID_3’ defined but not used [-Wunused-const-variable=] drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:138:22: warning: ‘DP_VGA_LVDS_CONVERTER_ID_2’ defined but not used [-Wunused-const-variable=] drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:133:22: warning: ‘DP_SINK_DEVICE_STR_ID_2’ defined but not used [-Wunused-const-variable=] drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:132:22: warning: ‘DP_SINK_DEVICE_STR_ID_1’ defined but not used [-Wunused-const-variable=] [snip 400 similar lines brevity] Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-22drm/amd/display/dc/dc_hdmi_types: Move string definition to the only file ↵Lee Jones1-0/+2
it's used in Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/dc_hdmi_types.h:53:22: warning: ‘dp_hdmi_dongle_signature_str’ defined but not used [-Wunused-const-variable=] [snipped 400 similar lines for brevity] Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-22drm/amd/display: Remove the unused function link_timing_bandwidth_kbps()Jiapeng Chong1-51/+0
The function link_timing_bandwidth_kbps is defined in the link_validation.c file, but not called elsewhere, so remove this unused function. drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_validation.c:258:10: warning: no previous prototype for ‘link_timing_bandwidth_kbps’. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4547 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-16drm/amd: fix compilation issue with legacy gccbobzhou1-3/+6
This patch is used to fix following compilation issue with legacy gcc error: ‘for’ loop initial declarations are only allowed in C99 mode Signed-off-by: bobzhou <bob.zhou@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-16drm/amd/display: Fix DP MST sinks removal issueCruise Hung1-0/+8
[Why] In USB4 DP tunneling, it's possible to have this scenario that the path becomes unavailable and CM tears down the path a little bit late. So, in this case, the HPD is high but fails to read any DPCD register. That causes the link connection type to be set to sst. And not all sinks are removed behind the MST branch. [How] Restore the link connection type if it fails to read DPCD register. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-16drm/amd/display: hpd rx irq not working with eDP interfaceRobin Chen1-2/+7
[Why] This is the fix for the defect of commit ab144f0b4ad6 ("drm/amd/display: Allow individual control of eDP hotplug support"). [How] To revise the default eDP hotplug setting and use the enum to git rid of the magic number for different options. Fixes: ab144f0b4ad6 ("drm/amd/display: Allow individual control of eDP hotplug support") Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Robin Chen <robin.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: Add Validate BW for USB4 LinksMustapha Ghaddar2-0/+48
[WHY] To validate the BW used for DPIAs per HostRouter [HOW] Add the Validate function in C source file Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-14 15:35:33 +0300