summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/irq
AgeCommit message (Collapse)AuthorFilesLines
2023-02-16drm/amd/display: Turn global functions into staticArthur Grillo1-1/+1
Turn global functions that are only used locally into static ones. This reduces the number of -Wmissing-prototypes warnings. Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-04drm/amd/display: Remove the unused function dmub_outbox_irq_info_funcsJiapeng Chong1-5/+0
The function dmub_outbox_irq_info_funcs is defined in the irq_service_dcn201.c file, but not called elsewhere, so remove this unused function. drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn201/irq_service_dcn201.c:139:43: warning: unused variable 'dmub_outbox_irq_info_funcs'. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3520 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: clean up some irq service code for dcn201Liu Xi2-8/+11
[Why and how] Clean up some irq service code for dcn201. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Liu Xi <xi.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-18drm/amd/display: add an ASSERT() to irq service functionsHamza Mahfooz1-2/+15
Currently, if we encounter unimplemented functions, it is difficult to tell what caused them just by looking at dmesg and that is compounded by the fact that it is often hard to reproduce said issues, for instance we have had reports of this condition being triggered when removing a secondary display that is setup in mirror mode and is connected using usb-c. So, to have access to more detailed debugging information, add an ASSERT() to dal_irq_service_ack() and dal_irq_service_set() that only triggers when we encounter an unimplemented function. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-20drm/amd/display: Support vertical interrupt 0 for all dcn ASICWayne Lin2-7/+26
[Why] When CONFIG_DRM_AMD_SECURE_DISPLAY is enabled, it will try to register vertical interrupt 0 for specific task. Currently, only dcn10 have defined relevant info for vertical interrupt 0. If we enable CONFIG_DRM_AMD_SECURE_DISPLAY for other dcn ASIC, will get DC_IRQ_SOURCE_INVALID while calling dc_interrupt_to_irq_source() and cause pointer errors. [How] Add support of vertical interrupt 0 for all dcn ASIC. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-14drm/amd/display: Enable DCN314 in DCRoman Li1-0/+10
Add support for DCN 3.1.4 in Display Core Signed-off-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-14drm/amd/display: Add DCN314 IRQ servicesRoman Li2-0/+469
IRQ services to support DCN 3.1.4 interrupts. v2: make to_dal_irq_source_dcn314 static (Alex) Signed-off-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Move all linux includes into OS typesHarry Wentland5-10/+0
Move all linux includes into OS types. Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-30drm/amd/display: change to_dal_irq_source_dnc32() storage class specifier to ↵Tom Rix1-1/+1
static sparse reports drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn32/irq_service_dcn32.c:39:20: warning: symbol 'to_dal_irq_source_dcn32' was not declared. Should it be static? to_dal_irq_source_dnc32() is only referenced in irq_service_dnc32.c, so change its storage class specifier to static. Fixes: 0efd4374f6b4 ("drm/amd/display: add dcn32 IRQ changes") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: add missing interrupt handlers for DCN32/DCN321Aurabindo Pillai1-1/+64
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: add dcn32 IRQ changesAurabindo Pillai3-1/+413
Add DCN3.2.x interrupt support. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-11drm/amd/display: remove redundant CONFIG_DRM_AMD_DC_DCN in irqAlex Hung4-13/+1
[Why & How] CONFIG_DRM_AMD_DC_DCN is used by pass the compilation failures, but DC code should be OS-agnostic. This patch fixes it by removing unnecessasry CONFIG_DRM_AMD_DC_DCN in irq directory. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-25drm/amd/display: Turn functions into staticMagali Lemes1-1/+1
Silence [-Wmissing-prototypes] sparse warnings from the display folder such as: ../drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn315/dcn315_smu.c:126:5: warning: no previous prototype for ‘dcn315_smu_send_msg_with_param’ [-Wmissing-prototypes] 126 | int dcn315_smu_send_msg_with_param( | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ v2: drop unused function dcn315_smu_set_voltage_via_phyclk() to avoid adding a warning (Alex) Cc: Qingqing Zhuo (Lillian) <qingqing.zhuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Magali Lemes <magalilemes00@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: Turn global functions into static functionsMaíra Canal2-2/+2
Turn previously global functions into static functions to avoid -Wmissing-prototype warnings, such as: drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn30/irq_service_dcn30.c:50:20: warning: no previous prototype for function 'to_dal_irq_source_dcn30' [-Wmissing-prototypes] enum dc_irq_source to_dal_irq_source_dcn30( ^ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn30/irq_service_dcn30.c:50:1: note: declare 'static' if the function is not intended to be used outside of this translation unit enum dc_irq_source to_dal_irq_source_dcn30( ^ static 1 warning generated. drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c:488:6: warning: no previous prototype for function 'dcn316_clk_mgr_helper_populate_bw_params' [-Wmissing-prototypes] void dcn316_clk_mgr_helper_populate_bw_params( ^ drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c:488:1: note: declare 'static' if the function is not intended to be used outside of this translation unit void dcn316_clk_mgr_helper_populate_bw_params( ^ static 1 warning generated. v2: drop is_timing_changed hunk (Alex) Signed-off-by: Maíra Canal <maira.canal@usp.br> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: Remove unused dmub_outbox_irq_info_funcs variableMaíra Canal1-5/+0
Remove the unused struct irq_source_info_funcs dmub_outbox_irq_info_funcs from the file, which was declared but never hooked up. This was pointed by clang with the following warning: drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn201/irq_service_dcn201.c:141:43: warning: unused variable 'dmub_outbox_irq_info_funcs' [-Wunused-const-variable] static const struct irq_source_info_funcs dmub_outbox_irq_info_funcs = { ^ Signed-off-by: Maíra Canal <maira.canal@usp.br> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-23drm/amd/display: Remove vupdate_int_entry definitionMaíra Canal1-14/+0
Remove the vupdate_int_entry definition and utilization to avoid the following warning by Clang: drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:410:2: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] vupdate_no_lock_int_entry(0), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39: note: expanded from macro 'vupdate_no_lock_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:404:2: note: previous initialization is here vupdate_int_entry(0), ^~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39: note: expanded from macro 'vupdate_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:411:2: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] vupdate_no_lock_int_entry(1), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39: note: expanded from macro 'vupdate_no_lock_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:405:2: note: previous initialization is here vupdate_int_entry(1), ^~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39: note: expanded from macro 'vupdate_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:412:2: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] vupdate_no_lock_int_entry(2), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39: note: expanded from macro 'vupdate_no_lock_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:406:2: note: previous initialization is here vupdate_int_entry(2), ^~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39: note: expanded from macro 'vupdate_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:413:2: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] vupdate_no_lock_int_entry(3), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39: note: expanded from macro 'vupdate_no_lock_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:407:2: note: previous initialization is here vupdate_int_entry(3), ^~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39: note: expanded from macro 'vupdate_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:414:2: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] vupdate_no_lock_int_entry(4), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39: note: expanded from macro 'vupdate_no_lock_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:408:2: note: previous initialization is here vupdate_int_entry(4), ^~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39: note: expanded from macro 'vupdate_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:415:2: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] vupdate_no_lock_int_entry(5), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39: note: expanded from macro 'vupdate_no_lock_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:409:2: note: previous initialization is here vupdate_int_entry(5), ^~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39: note: expanded from macro 'vupdate_int_entry' [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\ ^~ 6 warnings generated. Fixes: 688f97ed3f5e ("drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1") Signed-off-by: Maíra Canal <maira.canal@usp.br> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-18drm/amd/display: Add DCN315 IRQQingqing Zhuo3-0/+480
Add irq interfaces for DCN 3.1.5. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-08drm/amdgpu: move dpcs_3_0_0 headers from dcn to dpcsAlex Deucher1-2/+2
To align with other headers. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-15drm/amd/display: Revert W/A for hard hangs on DCN20/DCN21Mario Limonciello6-59/+1
The WA from commit 2a50edbf10c8 ("drm/amd/display: Apply w/a for hard hang on HPD") and commit 1bd3bc745e7f ("drm/amd/display: Extend w/a for hard hang on HPD to dcn20") causes a regression in s0ix where the system will fail to resume properly on many laptops. Pull the workarounds out to avoid that s0ix regression in the common case. This HPD hang happens with an external device in special circumstances and a new W/A will need to be developed for this in the future. Cc: Qingqing Zhuo <qingqing.zhuo@amd.com> Reported-by: Scott Bruce <smbruce@gmail.com> Reported-by: Chris Hixon <linux-kernel-bugs@hixontech.com> Reported-by: spasswolf@web.de Link: https://bugzilla.kernel.org/show_bug.cgi?id=215436 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1821 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1852 Fixes: 2a50edbf10c8 ("drm/amd/display: Apply w/a for hard hang on HPD") Fixes: 1bd3bc745e7f ("drm/amd/display: Extend w/a for hard hang on HPD to dcn20") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-15drm/amd/display: Add src/ext ID info for dummy serviceSolomon Chiu1-4/+6
[Why] Current error log of dummy irq service doesn't have src/ext ID info in the log. [How] Add src/ext ID in ack/set of dummy irq service. Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: fix function scopesIsabella Basso4-16/+12
This turns previously global functions into static, thus removing compile-time warnings such as: warning: no previous prototype for 'get_highest_allowed_voltage_level' [-Wmissing-prototypes] 742 | unsigned int get_highest_allowed_voltage_level(uint32_t chip_family, uint32_t hw_internal_rev, uint32_t pci_revision_id) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ warning: no previous prototype for 'rv1_vbios_smu_send_msg_with_param' [-Wmissing-prototypes] 102 | int rv1_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr, unsigned int msg_id, unsigned int param) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Changes since v1: - As suggested by Rodrigo Siqueira: 1. Rewrite function signatures to make them more readable. 2. Get rid of unused functions in order to remove 'defined but not used' warnings. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Isabella Basso <isabbasso@riseup.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amdgpu/display: fold DRM_AMD_DC_DCN201 into DRM_AMD_DC_DCNAlex Deucher1-2/+0
No need for a separate kconfig option at this point. Reviewed-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amd/display: add cyan_skillfish display supportZhan Liu3-0/+420
[Why] add display related cyan_skillfish files in. makefile controlled by CONFIG_DRM_AMD_DC_DCN201 flag. v2: squash in clang fixes from Harry, Nathan v3: squash in missing CONFIG_DRM_AMD_DC check (Alex) Signed-off-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Jun Lei <jun.lei@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-28drm/amd/display: Replace referral of dal with dcQingqing Zhuo4-4/+4
[Why] DC should be used in place of DAL in upstream. [How] Replace dal with dc in function names. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Extend w/a for hard hang on HPD to dcn20Qingqing Zhuo2-0/+27
[Why] HPD disable and enable sequences are not mutually exclusive on Linux. For HPDs that spans under 1s (i.e. HPD low = 1s), part of the disable sequence (specifically, a request to SMU to lower refclk) could come right before the call to PHY enablement, causing DMUB to access an irresponsive PHY and thus a hard hang on the system. [How] Disable 48mhz refclk off when there is any HPD status in connected state for dcn20. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Apply w/a for hard hang on HPDQingqing Zhuo4-1/+32
[Why] HPD disable and enable sequences are not mutually exclusive on Linux. For HPDs that spans under 1s (i.e. HPD low = 1s), part of the disable sequence (specifically, a request to SMU to lower refclk) could come right before the call to PHY enablement, causing DMUB to access an irresponsive PHY and thus a hard hang on the system. [How] Disable 48mhz refclk off when there is any HPD status in connected state. Reviewed-by: Hersen Wu <hersenwu@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-01drm/amd/display: fix null pointer access in gpu resetGuchun Chen1-2/+2
During GPU reset, when receiving a DMCUB OUTBUX0 interrupt, DAL code will set it to be OUTBOX interrupt and sets hw interrupt. However, OUTBOX interrupt is not registered yet, so a NULL pointer access will be executed. Call Trace: dal_irq_service_set+0x30/0x90 [amdgpu] dc_interrupt_set+0x24/0x30 [amdgpu] amdgpu_dm_set_dmub_outbox_irq_state+0x22/0x30 [amdgpu] amdgpu_irq_update+0x77/0xa0 [amdgpu] amdgpu_irq_gpu_reset_resume_helper+0x67/0xa0 [amdgpu] amdgpu_do_asic_reset+0x219/0x260 [amdgpu] amdgpu_device_gpu_recover.cold+0x8c5/0xb64 [amdgpu] amdgpu_debugfs_gpu_recover_show+0x2c/0x60 [amdgpu] seq_read_iter+0xc2/0x450 ? do_anonymous_page+0x22c/0x3b0 seq_read+0xf9/0x140 full_proxy_read+0x5c/0x90 vfs_read+0xaa/0x190 ksys_read+0x67/0xe0 __x64_sys_read+0x1a/0x20 Fixes: effbf6ca7eafda ("drm/amdgpu/display: remove an old DCN3 guard") Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-and-tested-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-22drm/amdgpu/display: fold DRM_AMD_DC_DCN3_1 into DRM_AMD_DC_DCNAlex Deucher2-5/+0
No need for a separate flag now that DCN3.1 is not in bring up. Fold into DRM_AMD_DC_DCN like previous DCN IPs. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-04drm/amd/display: Add DCN3.1 IRQ managerNicholas Kazlauskas3-0/+480
Add IRQ services for DCN3.1 to handle hardware generated interrupts. Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-20drm/amd/display: Edit license info for beige goby DC filesAurabindo Pillai2-40/+4
[How] * Add MIT license to all new files as SPDX tag. * Fix copyright year Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-20drm/amd/display: Initial DC support for Beige GobyAurabindo Pillai3-0/+321
[Why&How] Add Beige Goby (DCN303) resource, irq service, & dmub loader. v2: fix nbio include (Alex) Signed-off-by: Chris Park <Chris.Park@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-11drm/amd/display: Support for DMUB AUXJude Shih1-9/+9
[WHY] To process AUX transactions with DMUB using inbox1 and outbox1 mail boxes. [How] 1) Added inbox1 command DMUB_CMD__DP_AUX_ACCESS to issue AUX commands to DMUB in dc_process_dmub_aux_transfer_async(). DMUB processes AUX cmd with DCN and sends reply back in an outbox1 message triggering an outbox1 interrupt to driver. 2) In existing driver implementation, AUX commands are processed synchronously by configuring DCN reg. But in DMUB AUX, driver sends an inbox1 message and waits for a conditional variable (CV) which will be signaled by outbox1 ISR. 3) DM will retrieve Outbox1 message and send back reply to upper layer and complete the AUX command Signed-off-by: Jude Shih <shenshih@amd.com> Reviewed-by: Hanghong Ma <Hanghong.Ma@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: add DMCUB trace irq support for DCN302Guchun Chen1-0/+30
Otherwise, below errors will be found on DIMGREY_CAVEFISH with DCN302. Error log observed in driver load: [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] *ERROR* DM_IRQ: invalid irq_source: 0! Error observed in mode1_rest sequence: [ 27.265920] #PF: supervisor read access in kernel mode [ 27.265941] #PF: error_code(0x0000) - not-present page [ 27.265956] PGD 0 P4D 0 [ 27.265967] Oops: 0000 [#1] SMP NOPTI [ 27.265979] CPU: 0 PID: 1360 Comm: cat Tainted: G W 5.11.0-99b3786c1770 #20210323 [ 27.266005] Hardware name: System manufacturer System Product Name/PRIME Z390-A, BIOS 1401 11/26/2019 [ 27.266033] RIP: 0010:dal_irq_service_ack+0x25/0x60 [amdgpu] [ 27.266203] Code: 5d 5d c3 66 90 0f 1f 44 00 00 55 83 fe 61 48 89 e5 77 27 89 f0 48 8d 04 40 48 c1 e0 04 48 03 47 08 74 17 48 8b 50 28 48 89 c6 <48> 8b 52 08 48 85 d2 74 20 e8 1d 64 45 c9 5d c3 89 f2 48 c7 c7 f0 [ 27.266248] RSP: 0018:ffffa115824a3c08 EFLAGS: 00010082 [ 27.266270] RAX: ffffffffc0942c10 RBX: ffffffffc0942c10 RCX: 0000000000000000 [ 27.266288] RDX: 0000000000000000 RSI: ffffffffc0942c10 RDI: ffff88d509cba7a0 [ 27.266312] RBP: ffffa115824a3c08 R08: 0000000000000000 R09: 0000000000000001 [ 27.266335] R10: ffffa115824a3b20 R11: ffffa115824a3b58 R12: ffff88d509cba7a0 [ 27.266353] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000246 [ 27.266377] FS: 00007fb3e2438580(0000) GS:ffff88d50dc00000(0000) knlGS:0000000000000000 [ 27.266402] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.266417] CR2: 0000000000000008 CR3: 000000083e5ac006 CR4: 00000000003706f0 [ 27.266441] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.266464] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 27.266483] Call Trace: [ 27.266491] dal_irq_service_set+0x31/0x80 [amdgpu] [ 27.266639] dc_interrupt_set+0x24/0x30 [amdgpu] [ 27.266775] amdgpu_dm_set_dmub_trace_irq_state+0x22/0x30 [amdgpu] [ 27.266920] amdgpu_irq_update+0x57/0xa0 [amdgpu] [ 27.267030] amdgpu_irq_gpu_reset_resume_helper+0x64/0xa0 [amdgpu] [ 27.267135] amdgpu_do_asic_reset+0x211/0x420 [amdgpu] [ 27.267232] amdgpu_device_gpu_recover+0x517/0xa70 [amdgpu] [ 27.267325] gpu_recover_get+0x2e/0x60 [amdgpu] [ 27.267421] simple_attr_read+0x6b/0x130 [ 27.267441] debugfs_attr_read+0x49/0x70 [ 27.267454] full_proxy_read+0x5c/0x90 [ 27.267474] vfs_read+0xa1/0x190 [ 27.267486] ksys_read+0xa7/0xe0 [ 27.267501] __x64_sys_read+0x1a/0x20 [ 27.267521] do_syscall_64+0x37/0x80 [ 27.267541] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 27.267562] RIP: 0033:0x7fb3e2356142 Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Log DMCUB trace buffer eventsLeo (Hanghong) Ma2-2/+52
[Why] We want to log DMCUB trace buffer events as Linux kernel traces. [How] Register an IRQ handler for DMCUB outbox0 interrupt in amdgpu_dm, and log the messages in the DMCUB tracebuffer to a new DMCUB TRACE_EVENT as soon as we receive the outbox0 IRQ from DMCUB FW. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-26Merge tag 'amd-drm-next-5.13-2021-03-23' of ↵Daniel Vetter4-0/+133
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.13-2021-03-23: amdgpu: - Debugfs cleanup - Various cleanups and spelling fixes - Flexible array cleanups - Initial AMD Freesync HDMI - Display fixes - 10bpc dithering improvements - Display ASSR support - Clean up and unify powerplay and swsmu interfaces - Vangogh fixes - Add SMU gfx busy queues for RV/PCO - PCIE DPM fixes - S0ix fixes - GPU metrics data fixes - DCN secure display support - Backlight type override - Add initial support for Aldebaran - RAS fixes - Prime fixes for A+A systems - Reset fixes - Initial resource cursor support - Drop legacy IO BAR requirements - Various power fixes amdkfd: - MMU notifier fixes - APU fixes radeon: - Debugfs cleanups - Flexible array cleanups UAPI: - amdgpu: Add a new INFO ioctl interface to query video capabilities rather than hardcoding them in userspace. This allows us to provide fine grained asic capabilities (e.g., if a particular part is bandwidth limited, we can limit the capabilities). Proposed userspace: https://gitlab.freedesktop.org/leoliu/drm/-/commits/info_video_caps https://gitlab.freedesktop.org/leoliu/mesa/-/commits/info_video_caps - amdkfd: bump the driver version. There was a problem with reporting some RAS features on older versions of the driver. Proposed userspace: https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/commit/7cdd63475c36bb9f49bb960f90f9a8cdb7e80a21 Danvet: A bunch of conflicts all over, but it seems to compile ... I did put the call to dc_allow_idle_optimizations() on a single line since it looked a bit too jarring to be left alone. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210324040147.1990338-1-alexander.deucher@amd.com
2021-03-24drm/amd/display: Support vertical interrupt 0 for all dcn ASICWayne Lin4-0/+137
[Why] When CONFIG_DRM_AMD_SECURE_DISPLAY is enabled, it will try to register vertical interrupt 0 for specific task. Currently, only dcn10 have defined relevant info for vertical interrupt 0. If we enable CONFIG_DRM_AMD_SECURE_DISPLAY for other dcn ASIC, will get DC_IRQ_SOURCE_INVALID while calling dc_interrupt_to_irq_source() and cause pointer errors. [How] Add support of vertical interrupt 0 for all dcn ASIC. v2: squash in build fix (Alex) Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-23drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1Rodrigo Siqueira1-0/+22
When run igt@kms_vrr in a device that uses DCN2.1 architecture, we noticed multiple failures. Furthermore, when we tested a VRR demo, we noticed a system hang where the mouse pointer still works, but the entire system freezes; in this case, we don't see any dmesg warning or failure messages kernel. This happens due to a lack of vupdate_no_lock interrupt, making the userspace wait eternally to get the event back. For fixing this issue, we need to add the vupdate_no_lock interrupt in the interrupt list. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-02-23drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1Rodrigo Siqueira1-0/+22
When run igt@kms_vrr in a device that uses DCN2.1 architecture, we noticed multiple failures. Furthermore, when we tested a VRR demo, we noticed a system hang where the mouse pointer still works, but the entire system freezes; in this case, we don't see any dmesg warning or failure messages kernel. This happens due to a lack of vupdate_no_lock interrupt, making the userspace wait eternally to get the event back. For fixing this issue, we need to add the vupdate_no_lock interrupt in the interrupt list. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09drm/amd/display: Add otg vertical interrupt0 support in DCN1.0Wayne Lin1-0/+31
[Why & How] On DCN1.0, need otg vertical line interrupt to get appropriate timing to achieve specific feature request. Add otg vertical interrupt0 support for registers which operation is vertical sensitive. Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-14drm/amd/display/dc/irq/irq_service: Make local function staticLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/irq/irq_service.c:82:31: warning: no previous prototype for ‘find_irq_source_info’ [-Wmissing-prototypes] Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mauro Rossi <issor.oruam@gmail.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-14drm/amd/display: Add missing pflip irq for dcn2.0Alex Deucher1-2/+2
If we have more than 4 displays we will run into dummy irq calls or flip timout issues. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-05drm/amdgpu: fold CONFIG_DRM_AMD_DC_DCN3* into CONFIG_DRM_AMD_DC_DCN (v3)Alex Deucher3-6/+2
Avoids confusion in configurations. v2: fix build when CONFIG_DRM_AMD_DC_DCN is disabled v3: rebase on latest code Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> (v1) Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-02drm/amd/display: Add missing pflip irqBhawanpreet Lakha1-2/+2
If we have more than 4 displays we will run into dummy irq calls or flip timout issues. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-12drm/amd/display: Add support for DCN302 (v2)Bhawanpreet Lakha3-0/+387
- add DCN302 resource, irq service, dmub loader, - handle DC_VERSION_DCN_3_02 - define DCN302 power gating functions - handle DCN302 in GPIO files - define I2C regs - add CONFIG_DRM_AMD_DC_DCN3_02 guard v2: rebase fixes (Alex) Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amd/display: dc/irq: add support for DCE6 (v4)Mauro Rossi4-0/+449
[Why] irq service requires changes for DCE6 support [How] (v1) DCE6 targets are added replicating existing DCE8 implementation. due to missing CRTC_VERTICAL_INTERRUPT0_CONTROL registers/masks, dce/dce_8_0_{d,sh_mask}.h used instead of dce/dce_6_0_{d,sh_mask}.h (v2) DCE6 headers used adding the necessary vblank irq registers (INT_MASK and VBLANK_STATUS) and vblank irq masks as implemented in amdgpu driver. Add vblank_irq_info_funcs_dce60 with .set and .ack as per commit b10d51f ("drm/amd/display: Add interrupt entries for VBLANK isr.") and use it in vblank_int_entry(reg_num) macro definition (v3) updated due to following kernel 5.3 commit: 4fc4dca ("drm/amd: drop use of drmp.h in os_types.h") (v4) updated due to following kernel 5.6 commit: d9e3267 ("drm/amd/display: cleanup of construct and destruct funcs") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mauro Rossi <issor.oruam@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-11drm/amd/display: Use VUPDATE_NO_LOCK instead of VUPDATE for dcn30Nicholas Kazlauskas1-10/+18
[Why] Soft hangs occur when FreeSync is engaged since we utilize VUPDATE (which doesn't fire when holding the pipe lock) to send back vblank events when FreeSync is active. [How] The alternative (working) interrupt source for this mechanism is VUPDATE_NO_LOCK. We already use this all other DCN revisions so align dcn30 with those as well. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Add DCN3 IRQBhawanpreet Lakha3-0/+431
Add IWQ services for DCN3, This allows us to create/init and manage irqs for DCN3 Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-06drm/amd/display: rename core_dc to dcAnthony Koo1-2/+2
[Why] First, to make code more consistent Second, to get rid of those scenario where we create a second local pointer to dc when it's already passed in. [How] Rename core_dc to dc Remove duplicate local pointers to dc Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: cleanup of construct and destruct funcsAnthony Koo6-12/+12
[Why] Too many construct functions which makes searching difficult, especially on some debuggers. [How] Append all construct and destruct functions with dcn number and object type to make each construct function name unique Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amd/display: rename DCN1_0 kconfig to DCNBhawanpreet Lakha2-2/+2
Since dcn20 and dcn21 are under dcn1 it doesnt make sense to have it named dcn1. Change it to "dcn" to make it generic Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 05:35:33 +0300