summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dcn20
AgeCommit message (Collapse)AuthorFilesLines
2019-07-18drm/amd/display: fix up HUBBUB hw programming for VMJun Lei1-9/+8
[why] Some values were not being converted or bit-shifted properly for HW registers, causing black screen [how] Fix up the values before programming HW Signed-off-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: disable display writeback for navi14Xiaojie Yuan1-1/+1
not used. Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: add NAVI14 in resource constructBhawanpreet Lakha1-4/+19
Change the pipes to 5 if the asic is nv14 This is a temp patch, there was some refactor in the dml part of the code. which is not in this branch. for now this is good, we can implement this properly once we have an updated branch. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Wait for flip to completeAlvin Lee1-0/+11
[why] In pipe split issue occurs when we program immediate flip while vsync flip is pending [how] Don't program immediate flip until flip is no longer pending Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jaehyun Chung <Jaehyun.Chung@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Change min_h_sync_width from 8 to 4Fatemeh Darbehani1-1/+1
[Why] Some display's hsync width is lower than the minimum dcn20 is set to support right now. This will cause optc1_validate_timing to fail which eventually will result in wrong set mode. This was set to 8 as per HW team's request for no valid reason. [How] Changing min_h_sync_width to 4 will let us validate timing for preffered mode and light up the headset. This change was made to Vega 10 before for a similar issue. Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Poll for GPUVM context ready (v2)Julian Parkin1-0/+37
[Why] Hardware docs state that we must wait until the GPUVM context is ready after programming it. [How] Poll until the valid bit of PAGE_TABLE_BASE_ADDR_LO32 is set to 1 after programming it. v2: fix include for udelay (Alex) Signed-off-by: Julian Parkin <julian.parkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: wait for the whole frame after global unlockWenjing Liu1-0/+2
[why] The current code will not wait for the entire frame after global unlock. This causes dsc dynamic target bpp update corruption when there is a surface update immediately happens after this. [how] Wait for the entire whole frame after unlock before continuing the rest of stream and surface update. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: swap system aperture high/lowJun Lei1-2/+2
[why] Currently logical values are swapped in HW, causing system aperture to be undefined, so VA and PA cannot co-exist [how] program values correctly Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Set default block_size, even in unexpected casesDmytro Laktyushkin1-0/+1
We're not expected to enter the default case, but not returning a default value here is incorrect. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: cap DCFCLK hardmin to 507 for NV10Jun Lei1-0/+4
[why] Due to limitation in SMU/PPLIB, it is not possible to know Fmax @ Vmin for DCFCLK. This causes issues at high display configurations where extra headroom of DCFCLK can enable P-state switching [how] Use existing override logic. If override not defined, then force min = 507 Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: fix dsc disableDmytro Laktyushkin1-1/+4
A regression caused dsc to never get disabled in certain situations. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: fix up HUBBUB hw programming for VMJun Lei1-9/+8
[why] Some values were not being converted or bit-shifted properly for HW registers, causing black screen [how] Fix up the values before programming HW Signed-off-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: init res_pool dccg_ref, dchub_ref with xtalin_freqhersen wu1-0/+25
[WHY] dc sw clock implementation of navi10 and raven are not exact the same. dcccg, dchub reference clock initialization is done after dc calls vbios dispcontroller_init table. for raven family, before dispcontroller_init is called by dc, the ref clk values are referred by sw clock implementation and program asic register using wrong values. this causes dchub pstate error. This need provide valid ref clk values. for navi10, since dispcontroller_init is not called, dchubbub_global_timer_enable = 0, hubbub2_get_dchub_ref_freq will hit aeert. this need remove hubbub2_get_dchub_ref_freq from this location and move to dcn20_init_hw. [HOW] for all asic, initialize dccg, dchub ref clk with data from vbios firmware table by default. for raven asic family, use these data from vbios, for asic which support sw dccg component, like navi10, read ref clk by sw dccg functions and update the ref clk. Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Force uclk to max for every stateNicholas Kazlauskas1-0/+10
Workaround for now to avoid underflow. The uclk switch time should really be bumped up to 404, but doing so would expose p-state hang issues for higher bandwidth display configurations. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-16drm/amd/display: return 'NULL' instead of 'false' from ↵Arnd Bergmann1-1/+1
dcn20_acquire_idle_pipe_for_layer clang complains that 'false' is a not a pointer: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_resource.c:2428:10: error: expression which evaluates to zero treated as a null pointer constant of type 'struct pipe_ctx *' [-Werror,-Wnon-literal-null-conversion] return false; Changing it to 'NULL' looks like the right thing that will shut up the warning and make it easier to read, while not changing behavior. Fixes: 7ed4e6352c16 ("drm/amd/display: Add DCN2 HW Sequencer and Resource") Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-16drm/amd/display: Support clang option for stack alignmentArnd Bergmann1-1/+7
As previously fixed for dml in commit 4769278e5c7f ("amdgpu/dc/dml: Support clang option for stack alignment") and calcs in commit cc32ad8f559c ("amdgpu/dc/calcs: Support clang option for stack alignment"), dcn20 uses an option that is not available with clang: clang: error: unknown argument: '-mpreferred-stack-boundary=4' scripts/Makefile.build:281: recipe for target 'drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_resource.o' failed Use the same trick that we have in the other two files. Fixes: 7ed4e6352c16 ("drm/amd/display: Add DCN2 HW Sequencer and Resource") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-08drm/amd/display: avoid 64-bit divisionArnd Bergmann1-1/+1
On 32-bit architectures, dividing a 64-bit integer in the kernel leads to a link error: ERROR: "__udivdi3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! ERROR: "__divdi3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! Change the two recently introduced instances to a multiply+shift operation that is also much cheaper on 32-bit architectures. We can do that here, since both of them are really 32-bit numbers that change a few percent. Fixes: bedbbe6af4be ("drm/amd/display: Move link functions from dc to dc_link") Fixes: f18bc4e53ad6 ("drm/amd/display: update calculated bounding box logic for NV") Acked-by: Slava Abramov <slava.abramov@amd.com> Tested-by: Slava Abramov <slava.abramov@amd.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-08drm/amd/display: dcn20: include linux/delay.hArnd Bergmann1-0/+1
Without this header, we get a compiler error in some configurations: .../dc/dcn20/dcn20_hwseq.c: In function 'dcn20_hwss_wait_for_blank_complete': .../dc/dcn20/dcn20_hwseq.c:1493:3: error: implicit declaration of function 'udelay' [-Werror=implicit-function-declaration] Note: the use of udelay itself may be problematic, as can occupy the CPU for 200ms in a busy-loop here. Fixes: 7ed4e6352c16 ("drm/amd/display: Add DCN2 HW Sequencer and Resource") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-27drm/amd/display: fix a couple of spelling mistakesColin Ian King1-1/+1
There are a couple of spelling mistakes in dm_error messages and a comment. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25drm/amd/amdgpu: Fix style issues in dcn20_resource.cErnst Sjöstrand1-5/+5
Inconsistent indentation and mixed use of brackets. Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25Merge branch 'drm-next' into drm-next-5.3Alex Deucher3-0/+6
Backmerge drm-next and fix up conflicts due to drmP.h removal. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display/dc: set num-dwb = 1 as navi10 asic caphersen wu1-1/+1
during navi10 bring up, dwb causes system hang. to continue debug major issue, disable dwb by set num-dwb = 0. the hang issue is not reproduced now by enable num-dwb =1. dc source is shared by all os. win needs num-dwb = 1. Signed-off-by: hersen wu <hersenxs.wu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Add Underflow Asserts to dcThomas Lim2-0/+3
[Why] For debugging underflow issues it can be useful to have asserts when the underflow initially occurs. [How] Read the underflow status registers after actions that have a high risk of causing underflow and assert that no underflow occurred. If underflow occurred, clear the bit. Signed-off-by: Thomas Lim <Thomas.Lim@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: move vmid determination logic to a moduleDmytro Laktyushkin8-94/+91
Currently vmid is decided internally inside dc. With the introduction of new asics we are required to coordinate vmid use with external components. This change converts vmid logic to a DAL module allowing vmid to be passed in as a parameter to DC. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: dcn2 use fixed clocks.Charlene Liu1-1/+8
[Description] dcn2 use fixed clocks and not program DPP CLK or Disp_CLK. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Use macro for invalid OPP IDWesley Chalmers2-3/+3
[WHY] This is meant to make it clearer that 0xf is not a valid OPP ID, and that code making use of OPP IDs should not accept this value. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: expose enable dp output functionsEric Bernstein2-1/+6
expose this function for future use Implementation of DCN3 DIO Link Encoder including dpcs register headers. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: making DCN20 WM table non-overlappingJun Lei1-9/+8
[why] Existing behavior has overlapping ranges resulting in path dependent SMU selection [how] Make ranges non-overlapping, resulting in non-path dependent selection Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: add some parameters to validate bandwidth functionsCharlene Liu2-9/+3
required for new checks. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Fix incorrect DML output_bpp valueIlya Bakoulin1-1/+39
[Why] The output_bpp pipe parameter was assigned an incorrect value (color depth enum), and subsequently used to overwrite the OutputBpp parameter calculated by DML. Seems like this had no effect except with DSC enabled, which would make DML produce bad outputs. [How] Removed assignment to OutputBpp, fixed output_bpp assignment, and properly set ForcedOutputLinkBPP instead of OutputBpp. Also removed condition in DML that prevented forcing of Output BPP with DSC enabled. Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Add missing VM conversion from hw valuesJun Lei2-17/+65
[why] VM implemenation is missing conversion from HW values in hubbub DM not passing actual PTB during flip [how] add proper HW conversion from logical values fix cases where we programmed VA even though we are in PA plumb in PTB from DM Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Enable DSC power-gating for DSC streamsNikola Cornij2-3/+8
[why] Currently DSC power gating is disabled by default because the power transition doesn't happen, causing a crash on some systems [how] Fix the lack of power state transition and enable DSC power gating by default. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: decouple dsc adjustment out of enablementWenjing Liu2-10/+4
[why] dsc adjustment is allowed via stream update sequence. dsc enablement is only allowed via commit stream sequence. with the current unified dsc set function, it is hard to determine which sequence it is called by. The solution is to decouple dsc adjustment out of enablement sequence so we can handle them separately. [how] decouple dsc adjustment out of enablement. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: always use 4 dp lanes for dmlJun Lei1-11/+1
[why] current DML logic uses currently trained setting for number of dp lanes in DML calculations. this is obviously flawed since just because 1 lane is in use doesn't mean only 1 lane can be used this causes mode validation to fail depending on current state, which is incorrect [how] DML should always assume 4 lanes are available. validation of bandwidth is not supposed to be handled by DML, since we do link validation without DML already also, DML is expecting there to be a copy of the max state, this state is removed when update_bounding_box is called to update actual SKU clocks. fix this as well by duping last state. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Eric Yang <eric.yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Use DCN2 functions instead of DCEWesley Chalmers1-1/+2
[WHY] DCN code should make as few references to DCE as possible [HOW] Copy DCE110 implementation of find_first_free_match_stream_enc_for_link into DCN10 Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: DCN2 Engine-specifc encoder allocationWesley Chalmers1-1/+2
[WHY] From DCE110 onward, we have the ability to assign DIG BE and FE separately for any display connector type; before, we could only do this for DP. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Disable DSC power gating in DiagsNikola Cornij1-0/+3
[why] With DSC power gating enabled, one of the register reads times out occasionally, causing a DSC test to fail. [how] Disable DSC power gating in Diags. NOTE: This has to be reverted once the problems with DSC power gating are resolved. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Set test pattern on blank when using Visual ConfirmJoshua Aberback1-42/+11
[Why] We want a test pattern to show up on screen when we're blanked and have visual confirm enabled, for debugging. Raven does this, it's a mistake that Navi does not. [How] - in "blank_pixel_data", set appropriate DPG pattern for visual confirm - refactor DPG calls out of "enable_stream_timing" Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: add null checks and set update flags for DCN2Dmytro Laktyushkin3-9/+14
* add plane state null checks * add and set update surface flags Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: used optimum VSTARTUP instead of MaxVStartupCharlene Liu1-0/+4
[Description] Features that are desirable for minimizing the Global Sync Period: DRR and lateflip Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Fix LB BPP and Cursor widthIlya Bakoulin1-8/+19
DCN2.0 LB BPP should be 48 or 16BPC and max cursor width should be 256. Also use populate_dml_pipes as functions pointer instead of using it directly Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: fix macro_tile_size for tilingDmytro Laktyushkin1-2/+2
A regression was introduced when we set correct tile size for the gfx9 swizzle mode. This resulted in incorrect macro tile size. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Remove OPP clock programming on plane disableJoshua Aberback1-6/+0
[Why] Plane disable gets calls when we enable blank. On DCN2, we blank by using DPG to display a black colour instead of using OTG blank. DPG runs off the OPP clock, therefore we shouldn't disable the OPP clock when disabling the plane. We do need to disable the OPP clock when disabling the entire pipe, that will be addressed in a separate commit. Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: fix odm mpo disableDmytro Laktyushkin1-5/+6
It looks like mpo isn't properly disabled during odm, this change is meant to fix that. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: [backport] dwb dm + efc supportCharlene Liu2-4/+25
dwb fixes. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Duke Du <Duke.Du@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Create DWB resource for DCN2Charlene Liu2-1/+111
[Description] dcn20 has num_dwb =1 in the res cap, but not created. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Duke Du <Duke.Du@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Intermittent DCN2 pipe hang on mode changeAric Cyr2-5/+12
[Why] GSL is being used to synchronize pipes when vsync is off but on transition to vsync on during a mode change GSL is not being reset correctly. [How] Disable GSL on any plane that is disabled. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Do a reg update instead of set when writing ODM color formatNikola Cornij1-1/+1
[why] If a set is done, DSC settings are zeroed out, leading to no DSC for the modes that require ODM, such as 8k60. This was a regression introduced by 5a4f26295176bbfc776c75aaf0f6dd8ccf806958. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: block passive dongle EDID Emulation for USB-C portsSamson Tam1-0/+2
[Why] Emulating passive dongle on USB-C port causes issue on some asics. [How] Check for DP_IS_USB_C flag in bios parser and propagate it to encoder features flags. If DP_IS_USB_C flag is set and it is trying to emulate passive dongle, then return fail. Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: DCHUB requestors numbers for Navi.Yongqiang Sun1-1/+23
[Why] The DCHub arbiter has a mechanism to dynamically rate limit the DCHub request stream to the fabric. If the memory controller is fully utilized and the DCHub requestors are well ahead of their amortized schedule, then it is safe to prevent the next winner from being committed and sent to the fabric. The utilization of the memory controller is approximated by ensuring that the number of outstanding requests is greater than a threshold specified by the ARB_MIN_REQ_OUTSTANDING. To determine that the DCHub requestors are well ahead of the amortized schedule, the slack of the next winner is compared with the ARB_SAT_LEVEL in DLG RefClk cycles. [How] The recommended settings to enable thise dynamic limiting for Navi is 180 requests. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-15 09:47:43 +0300